Hi Andy,
Just getting round to looking at this. I have the USB sound card and some patch leads. I'm fine with hooking it up to the dispatcher server, and I can dedicate a LAVA Panda board to this, but I just need to know how the patch leads need to be connected. I'm assuming I connect "audio out" from the panda to "line in" on the USB card, but in terms of the return trip, as it were, there are three "outs": "Front out", "Rear out" and "CEN/Bass out".
If we're intending two way testing, then how should I configure this?
Additionally, there is a "Mic In" and "SPDF in" and "SPDF out".
Any guidance would be very welcome.
Thanks
Dave
On 2 Dec 2012, at 02:30, Andy Green <andy.green@linaro.org> wrote:
On 11/29/2012 10:52 PM, the mail apparently from Dave Pigott included:
Hi all,
I'm purchasing a dedicated server for the new dispatcher work, and also getting a USB sound card, as discussed at Connect. I'm looking for guidance as to functionality - a link to amazon would be quite helpful. :)
Any suggestions welcome.
Hi Dave -
This should be a good way to blow GBP11.45
http://www.amazon.co.uk/External-Sound-Card-Channel-Audio/dp/B003TO3KHY/ref=sr_1_5?ie=UTF8&qid=1354414953&sr=8-5
It's not what I have but with optical in and out as well as 6ch support it should so the 2ch that we need as well.
These (0.58) wi
ll do
as the patch leads
http://www.amazon.co.uk/3-5mm-Stereo-Jack-Plug-1-2M/dp/B00077DC3S/ref=pd_sim_ce_6
-Andy
--
Andy Green | TI Landing Team Leader
Linaro.org │ Open source software for ARM SoCs | Follow Linaro
http://facebook.com/pages/Linaro/155974581091106 - http://twitter.com/#!/linaroorg - http://linaro.org/linaro-blog