#
# Sample configuration file for ISC dhcpd for Debian
#
# Attention: If /etc/ltsp/dhcpd.conf exists, that will be used as
# configuration file instead of this file.
#
#

# The ddns-updates-style parameter controls whether or not the server will
# attempt to do a DNS update when a lease is confirmed. We default to the
# behavior of the version 2 packages ('none', since DHCP v2 didn't
# have support for DDNS.)
ddns-update-style none;

# option definitions common to all supported networks...
option domain-name "cambridge.linaro.org";
option domain-name-servers 192.168.1.32;

default-lease-time 600;
max-lease-time 7200;

# If this DHCP server is the official DHCP server for the local
# network, the authoritative directive should be uncommented.
authoritative;

# Use this to send dhcp log messages to a different log file (you also
# have to hack syslog.conf to complete the redirection).
log-facility local7;

subnet 192.168.1.0 netmask 255.255.255.0 {
  range 192.168.1.64 192.168.1.254;
  option routers 192.168.1.1;
  option subnet-mask 255.255.255.0;
  option broadcast-address 192.168.1.255;
}

# No service will be given on this subnet, but declaring it helps the 
# DHCP server to understand the network topology.

#subnet 10.152.187.0 netmask 255.255.255.0 {
#}

# This is a very basic subnet declaration.

#subnet 10.254.239.0 netmask 255.255.255.224 {
#  range 10.254.239.10 10.254.239.20;
#  option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org;
#}

# This declaration allows BOOTP clients to get dynamic addresses,
# which we don't really recommend.

#subnet 10.254.239.32 netmask 255.255.255.224 {
#  range dynamic-bootp 10.254.239.40 10.254.239.60;
#  option broadcast-address 10.254.239.31;
#  option routers rtr-239-32-1.example.org;
#}

# A slightly different configuration for an internal subnet.
#subnet 10.5.5.0 netmask 255.255.255.224 {
#  range 10.5.5.26 10.5.5.30;
#  option domain-name-servers ns1.internal.example.org;
#  option domain-name "internal.example.org";
#  option routers 10.5.5.1;
#  option broadcast-address 10.5.5.31;
#  default-lease-time 600;
#  max-lease-time 7200;
#}

# Hosts which require special configuration options can be listed in
# host statements.   If no address is specified, the address will be
# allocated dynamically (if possible), but the host-specific information
# will still come from the host declaration.

#host passacaglia {
#  hardware ethernet 0:0:c0:5d:bd:95;
#  filename "vmunix.passacaglia";
#  server-name "toccata.fugue.com";
#}

# Fixed IP addresses can also be specified for hosts.   These addresses
# should not also be listed as being available for dynamic assignment.
# Hosts for which fixed IP addresses have been specified can boot using
# BOOTP or DHCP.   Hosts for which no fixed address is specified can only
# be booted with DHCP, unless there is an address range on the subnet
# to which a BOOTP client is connected which has the dynamic-bootp flag
# set.
#host fantasia {
#  hardware ethernet 08:00:07:26:c0:a5;
#  fixed-address fantasia.fugue.com;
#}

host dispatcher {
    hardware ethernet a0:b3:cc:ea:be:8e;
    fixed-address 192.168.1.7;
}

host lava-cloud01 {
    hardware ethernet 00:1e:67:16:22:79;
    fixed-address 192.168.1.14;
}

host lava-cloud02 {
    hardware ethernet 00:1e:67:16:34:55;
    fixed-address 192.168.1.15;
}

host lava-cloud03 {
    hardware ethernet 00:1e:67:16:18:c9;
    fixed-address 192.168.1.16;
}

host lava-cloud04 {
    hardware ethernet 00:1e:67:16:08:cd;
    fixed-address 192.168.1.18;
}

host lava-clou05 {
    hardware ethernet 00:1e:67:16:17:71;
    fixed-address 192.168.1.19;
}

host LAVA-Wifi-B {
    hardware ethernet 80:1f:02:6a:d6:e6;
    fixed-address 192.168.1.17;
}

host LAVA-Wifi-G {
    hardware ethernet 80:1f:02:6a:d1:86;
    fixed-address 192.168.1.24;
}

host LAVA-Wifi-N {
    hardware ethernet 80:1f:02:6a:d1:40;
    fixed-address 192.168.1.9;
}

host serial1 {
    hardware ethernet 00:e0:86:14:71:6e;
    fixed-address 192.168.1.11;
}

host serial2 {
    hardware ethernet 00:e0:86:17:34:29;
    fixed-address 192.168.1.23;
}

host serial3 {
    hardware ethernet 00:e0:86:18:b1:c3;
    fixed-address 192.168.1.30;
}

host serial4 {
    hardware ethernet 00:e0:86:19:e8:7f;
    fixed-address 192.168.1.35;
}

host pdu01 {
    hardware ethernet 00:C0:B7:52:C3:EE;
    fixed-address 192.168.1.13;
}

host pdu02 {
    hardware ethernet 00:C0:B7:58:57:BE;
    fixed-address 192.168.1.25;
}

host pdu03 {
    hardware ethernet 00:C0:B7:58:46:92;
    fixed-address 192.168.1.26;
}

host pdu04 {
    hardware ethernet 00:C0:B7:58:40:14;
    fixed-address 192.168.1.27;
}

host pdu05 {
    hardware ethernet 00:C0:B7:58:56:2D;
    fixed-address 192.168.1.28;
}

host pdu06 {
    hardware ethernet 00:C0:B7:5B:66:58;
    fixed-address 192.168.1.29;
}

host pdu07 {
    hardware ethernet 00:C0:B7:54:85:98;
    fixed-address 192.168.1.31;
}

host pdu08 {
    hardware ethernet 00:C0:B7:5B:66:C2;
    fixed-address 192.168.1.33;
}

host pdu09 {
    hardware ethernet 00:C0:B7:54:85:83;
    fixed-address 192.168.1.34;
}

host pdu10 {
    hardware ethernet 00:C0:B7:5B:66:EB;
    fixed-address 192.168.1.36;
}

host pdu11 {
    hardware ethernet 00:C0:B7:94:FF:55;
    fixed-address 192.168.1.8;
}

host mphackbox {
    hardware ethernet 00:02:f7:00:47:16;
    fixed-address 192.168.1.37;
}

host ikshackbox {
    hardware ethernet 00:02:f7:00:45:e3;
    fixed-address 192.168.1.38;
}

host nibattery {
    hardware ethernet f0:de:f1:fd:27:c7;
    fixed-address 192.168.1.39;
}


# You can declare a class of clients and then do address allocation
# based on that.   The example below shows a case where all clients
# in a certain class get addresses on the 10.17.224/24 subnet, and all
# other clients get addresses on the 10.0.29/24 subnet.

#class "foo" {
#  match if substring (option vendor-class-identifier, 0, 4) = "SUNW";
#}

#shared-network 224-29 {
#  subnet 10.17.224.0 netmask 255.255.255.0 {
#    option routers rtr-224.example.org;
#  }
#  subnet 10.0.29.0 netmask 255.255.255.0 {
#    option routers rtr-29.example.org;
#  }
#  pool {
#    allow members of "foo";
#    range 10.17.224.10 10.17.224.250;
#  }
#  pool {
#    deny members of "foo";
#    range 10.0.29.10 10.0.29.230;
#  }
#}
