September 2025 - Linux-kselftest-mirror

[PATCH net-next 00/13] selftests: Mark auto-deferring functions clearly

by Petr Machata

selftests/net/lib.sh contains a suite of iproute2 wrappers that automatically schedule the corresponding cleanup through defer. The fact they do so is however not immediately obvious, one needs to know which functions are handling the deferral behind the scenes, and which expect the caller to handle cleanups themselves. A convention for these auto-deferring functions would help both writing and patch review. This patchset does so by marking these functions with an adf_ prefix. We already have a few such functions: forwarding/lib.sh has adf_mcd_start() and a few selftests add private helpers that conform to this convention. Patches #1 to #8 gradually convert individual functions, one per patch. Patch #9 renames an auto-deferring private helpers named dfr_* to adf_*. The plan is not to retro-rename all private helpers, but I happened to know about this one. Patches #10 to #12 introduce several autodefer helpers for commonly used forwarding/lib.sh functions, and opportunistically convert straightforward instances of 'action; defer counteraction' to the new helpers. Patch #13 adds some README verbiage to pitch defer and the adf_* convention. Petr Machata (13): selftests: net: lib: Rename ip_link_add() to adf_* selftests: net: lib: Rename ip_link_set_master() to adf_* selftests: net: lib: Rename ip_link_set_addr() to adf_* selftests: net: lib: Rename ip_link_set_up() to adf_* selftests: net: lib: Rename ip_link_set_down() to adf_* selftests: net: lib: Rename ip_addr_add() to adf_* selftests: net: lib: Rename ip_route_add() to adf_* selftests: net: lib: Rename bridge_vlan_add() to adf_* selftests: net: vlan_bridge_binding: Rename dfr_set_binding_*() to adf_* selftests: forwarding: lib: Add an autodefer variant of vrf_prepare() selftests: forwarding: lib: Add an autodefer variant of simple_if_init() selftests: forwarding: lib: Add an autodefer variant of forwarding_enable() selftests: forwarding: README: Mention defer, adf_ .../drivers/net/mlxsw/devlink_trap_policer.sh | 9 +- .../drivers/net/mlxsw/qos_ets_strict.sh | 12 +- .../drivers/net/mlxsw/qos_max_descriptors.sh | 9 +- .../drivers/net/mlxsw/qos_mc_aware.sh | 12 +- .../drivers/net/mlxsw/sch_red_core.sh | 6 +- tools/testing/selftests/net/fdb_notify.sh | 26 ++-- tools/testing/selftests/net/forwarding/README | 15 ++ .../net/forwarding/bridge_activity_notify.sh | 21 ++- .../net/forwarding/bridge_fdb_local_vlan_0.sh | 65 ++++---- tools/testing/selftests/net/forwarding/lib.sh | 18 +++ .../selftests/net/forwarding/sch_ets_core.sh | 9 +- .../selftests/net/forwarding/sch_red.sh | 12 +- .../selftests/net/forwarding/sch_tbf_core.sh | 6 +- .../net/forwarding/vxlan_bridge_1q_mc_ul.sh | 141 +++++++++--------- .../net/forwarding/vxlan_reserved.sh | 33 ++-- tools/testing/selftests/net/lib.sh | 16 +- .../net/test_vxlan_fdb_changelink.sh | 8 +- .../selftests/net/vlan_bridge_binding.sh | 44 +++--- 18 files changed, 225 insertions(+), 237 deletions(-) -- 2.49.0

2 months

3
27
0 0

[PATCH net-next 00/15] mptcp: pm: special case for c-flag + luminar endp

by Matthieu Baerts (NGI0)

Here are some patches for the MPTCP PM, including some refactoring that I thought it would be best to send at the end of a cycle to avoid conflicts between net and net-next that could last a few weeks. The most interesting changes are in the first and last patch, the rest are patches refactoring the code & tests to validate the modifications. - Patches 1 & 2: When servers set the C-flag in their MP_CAPABLE to tell clients not to create subflows to the initial address and port -- e.g. a deployment behind a L4 load balancer like a typical CDN deployment -- clients will not use their other endpoints when default settings are used. That's because the in-kernel path-manager uses the 'subflow' endpoints to create subflows only to the initial address and port. The first patch fixes that (for >=v5.14), and the second one validates it. - Patches 3-14: various patches refactoring the code around the in-kernel PM (mainly): split too long functions, rename variables and functions to avoid confusions, reduce structure size, and compare IDs instead of IP addresses. Note that one patch modifies one internal variable used in one BPF selftest. - Patch 15: ability to control endpoints that are used in reaction to a new address announced by the other peer. With that, endpoints can be used only once. Signed-off-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> --- Notes: - Patches 1 & 2 are sent to net-next on purpose: to delay a bit the backports, just in case. Plus we are at the end of a cycle, and not to delay the other refactoring patches. - Sorry, I wanted to send this series earlier on, but due to some unrelated issues (and holiday), it got delayed. Most patches are pure refactoring ones. --- Matthieu Baerts (NGI0) (15): mptcp: pm: in-kernel: usable client side with C-flag selftests: mptcp: join: validate C-flag + def limit mptcp: pm: in-kernel: refactor fill_local_addresses_vec mptcp: pm: in-kernel: refactor fill_remote_addresses_vec mptcp: pm: rename 'subflows' to 'extra_subflows' mptcp: pm: in-kernel: rename 'subflows_max' to 'limit_extra_subflows' mptcp: pm: in-kernel: rename 'add_addr_signal_max' to 'endp_signal_max' mptcp: pm: in-kernel: rename 'add_addr_accept_max' to 'limit_add_addr_accepted' mptcp: pm: in-kernel: rename 'local_addr_max' to 'endp_subflow_max' mptcp: pm: in-kernel: rename 'local_addr_list' to 'endp_list' mptcp: pm: in-kernel: rename 'addrs' to 'endpoints' mptcp: pm: in-kernel: remove stale_loss_cnt mptcp: pm: in-kernel: reduce pernet struct size mptcp: pm: in-kernel: compare IDs instead of addresses mptcp: pm: in-kernel: add laminar endpoints include/uapi/linux/mptcp.h | 11 +- net/mptcp/pm.c | 32 +- net/mptcp/pm_kernel.c | 569 ++++++++++++++-------- net/mptcp/pm_userspace.c | 2 +- net/mptcp/protocol.h | 21 +- net/mptcp/sockopt.c | 22 +- tools/testing/selftests/bpf/progs/mptcp_subflow.c | 2 +- tools/testing/selftests/net/mptcp/mptcp_join.sh | 11 + 8 files changed, 441 insertions(+), 229 deletions(-) --- base-commit: a1f1f2422e098485b09e55a492de05cf97f9954d change-id: 20250925-net-next-mptcp-c-flag-laminar-f8442e4d4bd9 Best regards, -- Matthieu Baerts (NGI0) <matttbe(a)kernel.org>

2 months

2
16
0 0

[PATCH RFC bpf-next v2 0/5] Add the the capability to load HW RX checsum in eBPF programs

by Lorenzo Bianconi

Introduce bpf_xdp_metadata_rx_checksum() kfunc in order to load the HW RX cheksum results in the eBPF program binded to the NIC. Implement xmo_rx_checksum callback for veth and ice drivers. Please note ice support changes are just compile-tested at the moment. --- Changes in RFC v2: - Squash patch 1/6 and 2/6 - Introduce enum xdp_checksum definitions - Rework ice support to reuse ice_rx_csum codebase --- Lorenzo Bianconi (5): netlink: specs: Add XDP RX checksum capability to XDP metadata specs net: veth: Add xmo_rx_checksum callback to veth driver net: ice: Add xmo_rx_checksum callback selftests/bpf: Add selftest support for bpf_xdp_metadata_rx_checksum selftests/bpf: Add bpf_xdp_metadata_rx_checksum support to xdp_hw_metadat prog Documentation/netlink/specs/netdev.yaml | 5 + drivers/net/ethernet/intel/ice/ice_base.c | 1 + drivers/net/ethernet/intel/ice/ice_txrx.h | 1 + drivers/net/ethernet/intel/ice/ice_txrx_lib.c | 125 +++++++++++++-------- drivers/net/veth.c | 20 ++++ include/net/xdp.h | 14 +++ net/core/xdp.c | 29 +++++ .../selftests/bpf/prog_tests/xdp_metadata.c | 7 ++ .../testing/selftests/bpf/progs/xdp_hw_metadata.c | 7 ++ tools/testing/selftests/bpf/progs/xdp_metadata.c | 1 + tools/testing/selftests/bpf/xdp_hw_metadata.c | 27 +++++ tools/testing/selftests/bpf/xdp_metadata.h | 13 +++ 12 files changed, 206 insertions(+), 44 deletions(-) --- base-commit: 5e3fee34f626a8cb8715f5b5409416c481714ebf change-id: 20250925-bpf-xdp-meta-rxcksum-900685e2909d Best regards, -- Lorenzo Bianconi <lorenzo(a)kernel.org>

2 months

5
17
0 0

[PATCH v2] selftest: net: Fix error message if empty variable

by Alessandro Zanni

Fix to avoid cases where the `res` shell variable is empty in script comparisons. The comparison has been modified into string comparison to handle other possible values the variable could assume. The issue can be reproduced with the command: make kselftest TARGETS=net It solves the error: ./tfo_passive.sh: line 98: [: -eq: unary operator expected Signed-off-by: Alessandro Zanni <alessandro.zanni87(a)gmail.com> --- Notes: v2: edit condition to handle strings tools/testing/selftests/net/tfo_passive.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/tfo_passive.sh b/tools/testing/selftests/net/tfo_passive.sh index 80bf11fdc046..a4550511830a 100755 --- a/tools/testing/selftests/net/tfo_passive.sh +++ b/tools/testing/selftests/net/tfo_passive.sh @@ -95,7 +95,7 @@ wait res=$(cat $out_file) rm $out_file -if [ $res -eq 0 ]; then +if [ "$res" = "0" ]; then echo "got invalid NAPI ID from passive TFO socket" cleanup_ns exit 1 -- 2.43.0

2 months

3
2
0 0

[PATCH net-next] selftests: drv-net: Enable BTF

by Stanislav Fomichev

Commit fec2e55bdef ("selftests: drv-net: Pull data before parsing headers") added __ksym external symbol to xdp_native.bpf.c which now requires a kernel with BTF. Enable BTF for driver selftests. Before: # TAP version 13 # 1..10 # # Exception| Traceback (most recent call last): # # Exception| File "/home/sdf/src/linux/tools/testing/selftests/net/lib/py/ksft.py", line 244, in ksft_run # # Exception| case(*args) # # Exception| ~~~~^^^^^^^ # # Exception| File "/home/sdf/src/linux/tools/testing/selftests/drivers/net/./xdp.py", line 231, in test_xdp_native_pass_sb # # Exception| _test_pass(cfg, bpf_info, 256) # # Exception| ~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^ # # Exception| File "/home/sdf/src/linux/tools/testing/selftests/drivers/net/./xdp.py", line 209, in _test_pass # # Exception| prog_info = _load_xdp_prog(cfg, bpf_info) # # Exception| File "/home/sdf/src/linux/tools/testing/selftests/drivers/net/./xdp.py", line 114, in _load_xdp_prog # # Exception| cmd( # # Exception| ~~~^ # # Exception| f"ip link set dev {cfg.ifname} mtu {bpf_info.mtu} xdpdrv obj {abs_path} sec {bpf_info.xdp_sec}", # # Exception| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ # # Exception| shell=True # # Exception| ^^^^^^^^^^ # # Exception| ) # # Exception| ^ # # Exception| File "/home/sdf/src/linux/tools/testing/selftests/net/lib/py/utils.py", line 75, in __init__ # # Exception| self.process(terminate=False, fail=fail, timeout=timeout) # # Exception| ~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ # # Exception| File "/home/sdf/src/linux/tools/testing/selftests/net/lib/py/utils.py", line 95, in process # # Exception| raise CmdExitFailure("Command failed: %s\nSTDOUT: %s\nSTDERR: %s" % # # Exception| (self.proc.args, stdout, stderr), self) # # Exception| net.lib.py.utils.CmdExitFailure: Command failed: ip link set dev eni30773np1 mtu 1500 xdpdrv obj /home/sdf/src/linux/tools/testing/selftests/net/lib/xdp_native.bpf.o sec xdp # # Exception| STDOUT: b'' # # Exception| STDERR: b"libbpf: kernel BTF is missing at '/sys/kernel/btf/vmlinux', was CONFIG_DEBUG_INFO_BTF enabled?\nlibbpf: failed to find '.BTF' ELF section in /lib/modules/6.17.0-rc6-virtme/build/vmlinux\nlibbpf: failed to find valid kernel BTF\nlib bpf: Error loading vmlinux BTF: -3\nlibbpf: failed to load object '/home/sdf/src/linux/tools/testing/selftests/net/lib/xdp_native.bpf.o'\n" # not ok 1 xdp.test_xdp_native_pass_sb ... After: # TAP version 13 # 1..10 # ok 1 xdp.test_xdp_native_pass_sb # ok 2 xdp.test_xdp_native_pass_mb # ok 3 xdp.test_xdp_native_drop_sb # ok 4 xdp.test_xdp_native_drop_mb # ok 5 xdp.test_xdp_native_tx_sb # ok 6 xdp.test_xdp_native_tx_mb # # Ignoring SIGTERM (cnt: 2), already exiting... # # Ignoring SIGTERM (cnt: 3), already exiting... # # Exception| Traceback (most recent call last): # # Exception| File "/home/sdf/src/linux/tools/testing/selftests/net/lib/py/ksft.py", line 244, in ksft_run # # Exception| case(*args) # # Exception| ~~~~^^^^^^^ # # Exception| File "/home/sdf/src/linux/tools/testing/selftests/drivers/net/./xdp.py", line 506, in test_xdp_native_adjst_taa # # Exception| res = _test_xdp_native_tail_adjst( # # Exception| cfg, # # Exception| pkt_sz_lst, # # Exception| offset_lst, # # Exception| ) # # Exception| File "/home/sdf/src/linux/tools/testing/selftests/drivers/net/./xdp.py", line 467, in _test_xdp_native_tail_adt # # Exception| recvd_str = _exchg_udp(cfg, port, test_str) # # Exception| File "/home/sdf/src/linux/tools/testing/selftests/drivers/net/./xdp.py", line 72, in _exchg_udp # # Exception| with bkg(rx_udp_cmd, exit_wait=True) as nc: # # Exception| ~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^ # # Exception| File "/home/sdf/src/linux/tools/testing/selftests/net/lib/py/utils.py", line 137, in __exit__ # # Exception| return self.process(terminate=terminate, fail=self.check_fail) # # Exception| ~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ # # Exception| File "/home/sdf/src/linux/tools/testing/selftests/net/lib/py/utils.py", line 85, in process # # Exception| stdout, stderr = self.proc.communicate(timeout) # # Exception| ~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^ # # Exception| File "/usr/lib/python3.13/subprocess.py", line 1222, in communicate # # Exception| stdout, stderr = self._communicate(input, endtime, timeout) # # Exception| ~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^ # # Exception| File "/usr/lib/python3.13/subprocess.py", line 2128, in _communicate # # Exception| ready = selector.select(timeout) # # Exception| File "/usr/lib/python3.13/selectors.py", line 398, in select # # Exception| fd_event_list = self._selector.poll(timeout) # # Exception| File "/home/sdf/src/linux/tools/testing/selftests/net/lib/py/ksft.py", line 208, in _ksft_intr # # Exception| raise KsftTerminate() # # Exception| net.lib.py.ksft.KsftTerminate # # Stopping tests due to KsftTerminate. # not ok 7 xdp.test_xdp_native_adjst_tail_grow_data # # Totals: pass:6 fail:1 xfail:0 xpass:0 skip:0 error:0 Signed-off-by: Stanislav Fomichev <sdf(a)fomichev.me> --- tools/testing/selftests/drivers/net/config | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/testing/selftests/drivers/net/config b/tools/testing/selftests/drivers/net/config index f27172ddee0a..da5a5a94fa6a 100644 --- a/tools/testing/selftests/drivers/net/config +++ b/tools/testing/selftests/drivers/net/config @@ -5,3 +5,5 @@ CONFIG_NETCONSOLE=m CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_NETCONSOLE_EXTENDED_LOG=y CONFIG_XDP_SOCKETS=y +CONFIG_DEBUG_INFO_BTF=y +CONFIG_DEBUG_INFO_BTF_MODULES=n -- 2.51.0

2 months

2
1
0 0

[PATCH v3 00/36] sparc64: vdso: Switch to the generic vDSO library

by Thomas Weißschuh

The generic vDSO provides a lot common functionality shared between different architectures. SPARC is the last architecture not using it, preventing some necessary code cleanup. Make use of the generic infrastructure. Follow-up to and replacement for Arnd's SPARC vDSO removal patches: https://lore.kernel.org/lkml/20250707144726.4008707-1-arnd@kernel.org/ Tested on a Niagara T4 and QEMU. This has a semantic conflict with my series "vdso: Reject absolute relocations during build". The last patch of this series expects all users of the generic vDSO library to use the vdsocheck tool. This is not the case (yet) for SPARC64. I do have the patches for the integration, the specifics will depend on which series is applied first. Based on tip/timers/vdso. [0] https://lore.kernel.org/lkml/20250812-vdso-absolute-reloc-v4-0-61a8b615e5ec… Signed-off-by: Thomas Weißschuh <thomas.weissschuh(a)linutronix.de> --- Changes in v3: - Allocate vDSO data pages dynamically (and lots of preparations for that) - Drop clock_getres() - Fix 32bit clock_gettime() syscall fallback - Link to v2: https://lore.kernel.org/r/20250815-vdso-sparc64-generic-2-v2-0-b5ff80672347… Changes in v2: - Rebase on v6.17-rc1 - Drop RFC state - Fix typo in commit message - Drop duplicate 'select GENERIC_TIME_VSYSCALL' - Merge "sparc64: time: Remove architecture-specific clocksource data" into the main conversion patch. It violated the check in __clocksource_register_scale() - Link to v1: https://lore.kernel.org/r/20250724-vdso-sparc64-generic-2-v1-0-e376a3bd24d1… --- Arnd Bergmann (1): clocksource: remove ARCH_CLOCKSOURCE_DATA Thomas Weißschuh (35): selftests: vDSO: vdso_test_correctness: Handle different tv_usec types arm64: vDSO: getrandom: Explicitly include asm/alternative.h arm64: vDSO: gettimeofday: Explicitly include vdso/clocksource.h arm64: vDSO: compat_gettimeofday: Add explicit includes ARM: vdso: gettimeofday: Add explicit includes powerpc/vdso/gettimeofday: Explicitly include vdso/time32.h powerpc/vdso: Explicitly include asm/cputable.h and asm/feature-fixups.h LoongArch: vDSO: Explicitly include asm/vdso/vdso.h MIPS: vdso: Add include guard to asm/vdso/vdso.h MIPS: vdso: Explicitly include asm/vdso/vdso.h random: vDSO: Add explicit includes vdso/gettimeofday: Add explicit includes vdso/helpers: Explicitly include vdso/processor.h vdso/datapage: Remove inclusion of gettimeofday.h vdso/datapage: Trim down unnecessary includes random: vDSO: trim vDSO includes random: vDSO: remove ifdeffery random: vDSO: split out datapage update into helper functions random: vDSO: only access vDSO datapage after random_init() s390/time: Set up vDSO datapage later vdso/datastore: Reduce scope of some variables in vvar_fault() vdso/datastore: Drop inclusion of linux/mmap_lock.h vdso/datastore: Map pages through struct page vdso/datastore: Allocate data pages dynamically sparc64: vdso: Link with -z noexecstack sparc64: vdso: Remove obsolete "fake section table" reservation sparc64: vdso: Replace code patching with runtime conditional sparc64: vdso: Move hardware counter read into header sparc64: vdso: Move syscall fallbacks into header sparc64: vdso: Introduce vdso/processor.h sparc64: vdso: Switch to the generic vDSO library sparc64: vdso2c: Drop sym_vvar_start handling sparc64: vdso2c: Remove symbol handling sparc64: vdso: Implement clock_gettime64() clocksource: drop include of asm/clocksource.h from linux/clocksource.h arch/arm/include/asm/vdso/gettimeofday.h | 2 + arch/arm64/include/asm/vdso/compat_gettimeofday.h | 3 + arch/arm64/include/asm/vdso/gettimeofday.h | 2 + arch/arm64/kernel/vdso/vgetrandom.c | 2 + arch/loongarch/kernel/process.c | 1 + arch/loongarch/kernel/vdso.c | 1 + arch/mips/include/asm/vdso/vdso.h | 5 + arch/mips/kernel/vdso.c | 1 + arch/powerpc/include/asm/vdso/gettimeofday.h | 1 + arch/powerpc/include/asm/vdso/processor.h | 3 + arch/s390/kernel/time.c | 4 +- arch/sparc/Kconfig | 3 +- arch/sparc/include/asm/clocksource.h | 9 - arch/sparc/include/asm/processor.h | 3 + arch/sparc/include/asm/processor_32.h | 2 - arch/sparc/include/asm/processor_64.h | 25 -- arch/sparc/include/asm/vdso.h | 2 - arch/sparc/include/asm/vdso/clocksource.h | 10 + arch/sparc/include/asm/vdso/gettimeofday.h | 184 ++++++++++ arch/sparc/include/asm/vdso/processor.h | 41 +++ arch/sparc/include/asm/vdso/vsyscall.h | 10 + arch/sparc/include/asm/vvar.h | 75 ---- arch/sparc/kernel/Makefile | 1 - arch/sparc/kernel/time_64.c | 6 +- arch/sparc/kernel/vdso.c | 69 ---- arch/sparc/vdso/Makefile | 8 +- arch/sparc/vdso/vclock_gettime.c | 380 ++------------------- arch/sparc/vdso/vdso-layout.lds.S | 26 +- arch/sparc/vdso/vdso.lds.S | 2 - arch/sparc/vdso/vdso2c.c | 24 -- arch/sparc/vdso/vdso2c.h | 45 +-- arch/sparc/vdso/vdso32/vdso32.lds.S | 4 +- arch/sparc/vdso/vma.c | 274 +-------------- drivers/char/random.c | 75 ++-- include/linux/clocksource.h | 8 - include/linux/vdso_datastore.h | 6 + include/vdso/datapage.h | 23 +- include/vdso/helpers.h | 1 + init/main.c | 2 + kernel/time/Kconfig | 4 - lib/vdso/datastore.c | 73 ++-- lib/vdso/getrandom.c | 3 + lib/vdso/gettimeofday.c | 17 + .../testing/selftests/vDSO/vdso_test_correctness.c | 8 +- 44 files changed, 451 insertions(+), 997 deletions(-) --- base-commit: 5f84f6004e298bd41c9e4ed45c18447954b1dce6 change-id: 20250722-vdso-sparc64-generic-2-25f2e058e92c Best regards, -- Thomas Weißschuh <thomas.weissschuh(a)linutronix.de>

2 months

6
49
0 0

[PATCH v2] selftests/iommu: prevent use of uninitialized variable

by Alessandro Zanni

Fix to avoid the usage of the `res` variable uninitialized in the following macro expansions. It solves the following warning: In function ‘iommufd_viommu_vdevice_alloc’, inlined from ‘wrapper_iommufd_viommu_vdevice_alloc’ at iommufd.c:2889:1: ../kselftest_harness.h:760:12: warning: ‘ret’ may be used uninitialized [-Wmaybe-uninitialized] 760 | if (!(__exp _t __seen)) { \ | ^ ../kselftest_harness.h:513:9: note: in expansion of macro ‘__EXPECT’ 513 | __EXPECT(expected, #expected, seen, #seen, ==, 1) | ^~~~~~~~ iommufd_utils.h:1057:9: note: in expansion of macro ‘ASSERT_EQ’ 1057 | ASSERT_EQ(0, _test_cmd_trigger_vevents(self->fd, dev_id, nvevents)) | ^~~~~~~~~ iommufd.c:2924:17: note: in expansion of macro ‘test_cmd_trigger_vevents’ 2924 | test_cmd_trigger_vevents(dev_id, 3); | ^~~~~~~~~~~~~~~~~~~~~~~~ The issue can be reproduced, building the tests, with the command: make -C tools/testing/selftests TARGETS=iommu Signed-off-by: Alessandro Zanni <alessandro.zanni87(a)gmail.com> --- tools/testing/selftests/iommu/iommufd_utils.h | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/tools/testing/selftests/iommu/iommufd_utils.h b/tools/testing/selftests/iommu/iommufd_utils.h index 3c3e08b8c90e..772ca1db6e59 100644 --- a/tools/testing/selftests/iommu/iommufd_utils.h +++ b/tools/testing/selftests/iommu/iommufd_utils.h @@ -1042,15 +1042,13 @@ static int _test_cmd_trigger_vevents(int fd, __u32 dev_id, __u32 nvevents) .dev_id = dev_id, }, }; - int ret; while (nvevents--) { - ret = ioctl(fd, _IOMMU_TEST_CMD(IOMMU_TEST_OP_TRIGGER_VEVENT), - &trigger_vevent_cmd); - if (ret < 0) + if (!ioctl(fd, _IOMMU_TEST_CMD(IOMMU_TEST_OP_TRIGGER_VEVENT), + &trigger_vevent_cmd)) return -1; } - return ret; + return 0; } #define test_cmd_trigger_vevents(dev_id, nvevents) \ -- 2.43.0

2 months

2
1
0 0

[PATCH v3 0/3] selftests/bpf: Prepare to add -Wsign-compare for bpf selftests

by Mehdi Ben Hadj Khelifa

This series is preparing to add the -Wsign-compare C compilation flag to the Makefile for bpf selftests as requested by a TODO to help avoid implicit type conversions and have predictable behavior. Changelog: Changes from v2: -Split up the patch into a patch series as suggested by vivek -Include only changes to variable types with no casting by my mentor david -Removed the -Wsign-compare in Makefile to avoid compilation errors until adding casting for rest of comparisons. Link:https://lore.kernel.org/bpf/20250924195731.6374-1-mehdi.benhadjkhelifa… Changes from v1: - Fix CI failed builds where it failed due to do missing .c and .h files in my patch for working in mainline. Link:https://lore.kernel.org/bpf/20250924162408.815137-1-mehdi.benhadjkheli… Mehdi Ben Hadj Khelifa (3): selftests/bpf: Prepare to add -Wsign-compare for bpf tests selftests/bpf: Prepare to add -Wsign-compare for bpf tests selftests/bpf: Prepare to add -Wsign-compare for bpf tests tools/testing/selftests/bpf/progs/test_global_func11.c | 2 +- tools/testing/selftests/bpf/progs/test_global_func12.c | 2 +- tools/testing/selftests/bpf/progs/test_global_func13.c | 2 +- tools/testing/selftests/bpf/progs/test_global_func9.c | 2 +- tools/testing/selftests/bpf/progs/test_map_init.c | 2 +- tools/testing/selftests/bpf/progs/test_parse_tcp_hdr_opt.c | 2 +- .../selftests/bpf/progs/test_parse_tcp_hdr_opt_dynptr.c | 2 +- tools/testing/selftests/bpf/progs/test_skb_ctx.c | 2 +- tools/testing/selftests/bpf/progs/test_snprintf.c | 2 +- tools/testing/selftests/bpf/progs/test_sockmap_strp.c | 2 +- tools/testing/selftests/bpf/progs/test_tc_tunnel.c | 2 +- tools/testing/selftests/bpf/progs/test_xdp.c | 2 +- tools/testing/selftests/bpf/progs/test_xdp_dynptr.c | 2 +- tools/testing/selftests/bpf/progs/test_xdp_loop.c | 2 +- tools/testing/selftests/bpf/progs/test_xdp_noinline.c | 4 ++-- tools/testing/selftests/bpf/progs/uprobe_multi.c | 4 ++-- .../selftests/bpf/progs/uprobe_multi_session_recursive.c | 5 +++-- .../selftests/bpf/progs/verifier_iterating_callbacks.c | 2 +- 18 files changed, 22 insertions(+), 21 deletions(-) -- 2.51.0

2 months, 1 week

4
8
0 0

[PATCH net-next v2 0/8] psp: add a kselftest suite and netdevsim implementation

by Daniel Zahka

Add a basic test suite for drivers that support PSP. Also, add a PSP implementation in the netdevsim driver. The netdevsim implementation does encapsulation and decapsulation of PSP packets, but no crypto. The tests cover the basic usage of the uapi, and demonstrate key exchange and connection setup. The tests and netdevsim support IPv4 and IPv6. Here is an example run on a system with a CX7 NIC. TAP version 13 1..28 ok 1 psp.data_basic_send_v0_ip4 ok 2 psp.data_basic_send_v0_ip6 ok 3 psp.data_basic_send_v1_ip4 ok 4 psp.data_basic_send_v1_ip6 ok 5 psp.data_basic_send_v2_ip4 # SKIP ('PSP version not supported', 'hdr0-aes-gmac-128') ok 6 psp.data_basic_send_v2_ip6 # SKIP ('PSP version not supported', 'hdr0-aes-gmac-128') ok 7 psp.data_basic_send_v3_ip4 # SKIP ('PSP version not supported', 'hdr0-aes-gmac-256') ok 8 psp.data_basic_send_v3_ip6 # SKIP ('PSP version not supported', 'hdr0-aes-gmac-256') ok 9 psp.data_mss_adjust_ip4 ok 10 psp.data_mss_adjust_ip6 ok 11 psp.dev_list_devices ok 12 psp.dev_get_device ok 13 psp.dev_get_device_bad ok 14 psp.dev_rotate ok 15 psp.dev_rotate_spi ok 16 psp.assoc_basic ok 17 psp.assoc_bad_dev ok 18 psp.assoc_sk_only_conn ok 19 psp.assoc_sk_only_mismatch ok 20 psp.assoc_sk_only_mismatch_tx ok 21 psp.assoc_sk_only_unconn ok 22 psp.assoc_version_mismatch ok 23 psp.assoc_twice ok 24 psp.data_send_bad_key ok 25 psp.data_send_disconnect ok 26 psp.data_stale_key ok 27 psp.removal_device_rx # XFAIL Test only works on netdevsim ok 28 psp.removal_device_bi # XFAIL Test only works on netdevsim # Totals: pass:22 fail:0 xfail:2 xpass:0 skip:4 error:0 # # Responder logs (0): # STDERR: # Set PSP enable on device 1 to 0x3 # Set PSP enable on device 1 to 0x0 CHANGES: v2: - fix pylint warnings - insert CONFIG_INET_PSP in alphebetical order - use branch to skip all tests - fix compilation error when CONFIG_INET_PSP is not set v1: https://lore.kernel.org/netdev/20250924194959.2845473-1-daniel.zahka@gmail.… Jakub Kicinski (8): netdevsim: a basic test PSP implementation selftests: drv-net: base device access API test selftests: drv-net: add PSP responder selftests: drv-net: psp: add basic data transfer and key rotation tests selftests: drv-net: psp: add association tests selftests: drv-net: psp: add connection breaking tests selftests: drv-net: psp: add test for auto-adjusting TCP MSS selftests: drv-net: psp: add tests for destroying devices drivers/net/netdevsim/Makefile | 4 + drivers/net/netdevsim/netdev.c | 55 +- drivers/net/netdevsim/netdevsim.h | 33 + drivers/net/netdevsim/psp.c | 234 +++++++ net/core/skbuff.c | 1 + .../testing/selftests/drivers/net/.gitignore | 1 + tools/testing/selftests/drivers/net/Makefile | 10 + tools/testing/selftests/drivers/net/config | 1 + .../drivers/net/hw/lib/py/__init__.py | 4 +- .../selftests/drivers/net/lib/py/__init__.py | 4 +- .../selftests/drivers/net/lib/py/env.py | 5 + tools/testing/selftests/drivers/net/psp.py | 593 ++++++++++++++++++ .../selftests/drivers/net/psp_responder.c | 483 ++++++++++++++ .../testing/selftests/net/lib/py/__init__.py | 2 +- tools/testing/selftests/net/lib/py/ksft.py | 10 + tools/testing/selftests/net/lib/py/ynl.py | 5 + 16 files changed, 1432 insertions(+), 13 deletions(-) create mode 100644 drivers/net/netdevsim/psp.c create mode 100755 tools/testing/selftests/drivers/net/psp.py create mode 100644 tools/testing/selftests/drivers/net/psp_responder.c -- 2.47.3

2 months, 1 week

1
8
0 0

[PATCH v2] selftests/kexec: Ignore selftest binary

by Sohil Mehta

From: Dylan Yudaken <dyudaken(a)gmail.com> Add a .gitignore for the test case build object. Signed-off-by: Dylan Yudaken <dyudaken(a)gmail.com> Signed-off-by: Sohil Mehta <sohil.mehta(a)intel.com> Reviewed-by: Simon Horman <horms(a)kernel.org> --- The binary creates some noise. The patch to fix that seems to have fallen through the cracks. Sending another revision with an expanded Cc list. v2: - Pick up the review tag v1: https://lore.kernel.org/all/20250623232549.3263273-1-dyudaken@gmail.com/ --- tools/testing/selftests/kexec/.gitignore | 2 ++ 1 file changed, 2 insertions(+) create mode 100644 tools/testing/selftests/kexec/.gitignore diff --git a/tools/testing/selftests/kexec/.gitignore b/tools/testing/selftests/kexec/.gitignore new file mode 100644 index 000000000000..5f3d9e089ae8 --- /dev/null +++ b/tools/testing/selftests/kexec/.gitignore @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0-only +test_kexec_jump -- 2.43.0

2 months, 1 week

2
1
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror September 2025