- Linux-kselftest-mirror - lists.linaro.org

[PATCH AUTOSEL 5.4 041/187] selftests/ftrace: Fix ftrace test cases to check unsupported

by Sasha Levin

From: Masami Hiramatsu <mhiramat(a)kernel.org> [ Upstream commit 25deae098e748d8d36bc35129a66734b8f6925c9 ] Since dynamic function tracer can be disabled, set_ftrace_filter can be disappeared. Test cases which depends on it, must check whether the set_ftrace_filter exists or not before testing and if not, return as unsupported. Also, if the function tracer itself is disabled, we can not set "function" to current_tracer. Test cases must check it before testing, and return as unsupported. Signed-off-by: Masami Hiramatsu <mhiramat(a)kernel.org> Reviewed-by: Steven Rostedt (VMware) <rostedt(a)goodmis.org> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- .../selftests/ftrace/test.d/ftrace/func-filter-stacktrace.tc | 2 ++ tools/testing/selftests/ftrace/test.d/ftrace/func_cpumask.tc | 5 +++++ 2 files changed, 7 insertions(+) diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-stacktrace.tc b/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-stacktrace.tc index 36fb59f886ea..1a52f2883fe0 100644 --- a/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-stacktrace.tc +++ b/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-stacktrace.tc @@ -3,6 +3,8 @@ # description: ftrace - stacktrace filter command # flags: instance +[ ! -f set_ftrace_filter ] && exit_unsupported + echo _do_fork:stacktrace >> set_ftrace_filter grep -q "_do_fork:stacktrace:unlimited" set_ftrace_filter diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/func_cpumask.tc b/tools/testing/selftests/ftrace/test.d/ftrace/func_cpumask.tc index 86a1f07ef2ca..71fa3f49e35e 100644 --- a/tools/testing/selftests/ftrace/test.d/ftrace/func_cpumask.tc +++ b/tools/testing/selftests/ftrace/test.d/ftrace/func_cpumask.tc @@ -15,6 +15,11 @@ if [ $NP -eq 1 ] ;then exit_unresolved fi +if ! grep -q "function" available_tracers ; then + echo "Function trace is not enabled" + exit_unsupported +fi + ORIG_CPUMASK=`cat tracing_cpumask` do_reset() { -- 2.20.1

5 years, 5 months

1
0
0 0

[PATCH AUTOSEL 5.4 040/187] selftests/ftrace: Fix to check the existence of set_ftrace_filter

by Sasha Levin

From: Masami Hiramatsu <mhiramat(a)kernel.org> [ Upstream commit fd1baf6ca2ea3550ea47f2bb0bdcf34ec764a779 ] If we run ftracetest on the kernel with CONFIG_DYNAMIC_FTRACE=n, there is no set_ftrace_filter and all test cases are failed, because reset_ftrace_filter() returns an error. Let's check whether set_ftrace_filter exists in reset_ftrace_filter() and clean up only set_ftrace_notrace in initialize_ftrace(). Signed-off-by: Masami Hiramatsu <mhiramat(a)kernel.org> Reviewed-by: Steven Rostedt (VMware) <rostedt(a)goodmis.org> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/ftrace/test.d/functions | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/ftrace/test.d/functions b/tools/testing/selftests/ftrace/test.d/functions index 86986c4bba54..5d4550591ff9 100644 --- a/tools/testing/selftests/ftrace/test.d/functions +++ b/tools/testing/selftests/ftrace/test.d/functions @@ -46,6 +46,9 @@ reset_events_filter() { # reset all current setting filters } reset_ftrace_filter() { # reset all triggers in set_ftrace_filter + if [ ! -f set_ftrace_filter ]; then + return 0 + fi echo > set_ftrace_filter grep -v '^#' set_ftrace_filter | while read t; do tr=`echo $t | cut -d: -f2` @@ -93,7 +96,7 @@ initialize_ftrace() { # Reset ftrace to initial-state disable_events [ -f set_event_pid ] && echo > set_event_pid [ -f set_ftrace_pid ] && echo > set_ftrace_pid - [ -f set_ftrace_filter ] && echo | tee set_ftrace_* + [ -f set_ftrace_notrace ] && echo > set_ftrace_notrace [ -f set_graph_function ] && echo | tee set_graph_* [ -f stack_trace_filter ] && echo > stack_trace_filter [ -f kprobe_events ] && echo > kprobe_events -- 2.20.1

5 years, 5 months

1
0
0 0

[PATCH AUTOSEL 5.4 024/187] selftests: netfilter: use randomized netns names

by Sasha Levin

From: Florian Westphal <fw(a)strlen.de> [ Upstream commit 5a2e6af81807d4616f9839ad0ae7d1313b45c64d ] Using ns0, ns1, etc. isn't a good idea, they might exist already. Use a random suffix. Also, older nft versions don't support "-" as alias for stdin, so use /dev/stdin instead. Signed-off-by: Florian Westphal <fw(a)strlen.de> Acked-by: Phil Sutter <phil(a)nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo(a)netfilter.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/netfilter/nft_nat.sh | 332 ++++++++++--------- 1 file changed, 176 insertions(+), 156 deletions(-) diff --git a/tools/testing/selftests/netfilter/nft_nat.sh b/tools/testing/selftests/netfilter/nft_nat.sh index 1be55e705780..d7e07f4c3d7f 100755 --- a/tools/testing/selftests/netfilter/nft_nat.sh +++ b/tools/testing/selftests/netfilter/nft_nat.sh @@ -8,9 +8,14 @@ ksft_skip=4 ret=0 test_inet_nat=true +sfx=$(mktemp -u "XXXXXXXX") +ns0="ns0-$sfx" +ns1="ns1-$sfx" +ns2="ns2-$sfx" + cleanup() { - for i in 0 1 2; do ip netns del ns$i;done + for i in 0 1 2; do ip netns del ns$i-"$sfx";done } nft --version > /dev/null 2>&1 @@ -25,40 +30,49 @@ if [ $? -ne 0 ];then exit $ksft_skip fi -ip netns add ns0 +ip netns add "$ns0" if [ $? -ne 0 ];then - echo "SKIP: Could not create net namespace" + echo "SKIP: Could not create net namespace $ns0" exit $ksft_skip fi trap cleanup EXIT -ip netns add ns1 -ip netns add ns2 +ip netns add "$ns1" +if [ $? -ne 0 ];then + echo "SKIP: Could not create net namespace $ns1" + exit $ksft_skip +fi + +ip netns add "$ns2" +if [ $? -ne 0 ];then + echo "SKIP: Could not create net namespace $ns2" + exit $ksft_skip +fi -ip link add veth0 netns ns0 type veth peer name eth0 netns ns1 > /dev/null 2>&1 +ip link add veth0 netns "$ns0" type veth peer name eth0 netns "$ns1" > /dev/null 2>&1 if [ $? -ne 0 ];then echo "SKIP: No virtual ethernet pair device support in kernel" exit $ksft_skip fi -ip link add veth1 netns ns0 type veth peer name eth0 netns ns2 +ip link add veth1 netns "$ns0" type veth peer name eth0 netns "$ns2" -ip -net ns0 link set lo up -ip -net ns0 link set veth0 up -ip -net ns0 addr add 10.0.1.1/24 dev veth0 -ip -net ns0 addr add dead:1::1/64 dev veth0 +ip -net "$ns0" link set lo up +ip -net "$ns0" link set veth0 up +ip -net "$ns0" addr add 10.0.1.1/24 dev veth0 +ip -net "$ns0" addr add dead:1::1/64 dev veth0 -ip -net ns0 link set veth1 up -ip -net ns0 addr add 10.0.2.1/24 dev veth1 -ip -net ns0 addr add dead:2::1/64 dev veth1 +ip -net "$ns0" link set veth1 up +ip -net "$ns0" addr add 10.0.2.1/24 dev veth1 +ip -net "$ns0" addr add dead:2::1/64 dev veth1 for i in 1 2; do - ip -net ns$i link set lo up - ip -net ns$i link set eth0 up - ip -net ns$i addr add 10.0.$i.99/24 dev eth0 - ip -net ns$i route add default via 10.0.$i.1 - ip -net ns$i addr add dead:$i::99/64 dev eth0 - ip -net ns$i route add default via dead:$i::1 + ip -net ns$i-$sfx link set lo up + ip -net ns$i-$sfx link set eth0 up + ip -net ns$i-$sfx addr add 10.0.$i.99/24 dev eth0 + ip -net ns$i-$sfx route add default via 10.0.$i.1 + ip -net ns$i-$sfx addr add dead:$i::99/64 dev eth0 + ip -net ns$i-$sfx route add default via dead:$i::1 done bad_counter() @@ -66,8 +80,9 @@ bad_counter() local ns=$1 local counter=$2 local expect=$3 + local tag=$4 - echo "ERROR: $counter counter in $ns has unexpected value (expected $expect)" 1>&2 + echo "ERROR: $counter counter in $ns has unexpected value (expected $expect) at $tag" 1>&2 ip netns exec $ns nft list counter inet filter $counter 1>&2 } @@ -78,24 +93,24 @@ check_counters() cnt=$(ip netns exec $ns nft list counter inet filter ns0in | grep -q "packets 1 bytes 84") if [ $? -ne 0 ]; then - bad_counter $ns ns0in "packets 1 bytes 84" + bad_counter $ns ns0in "packets 1 bytes 84" "check_counters 1" lret=1 fi cnt=$(ip netns exec $ns nft list counter inet filter ns0out | grep -q "packets 1 bytes 84") if [ $? -ne 0 ]; then - bad_counter $ns ns0out "packets 1 bytes 84" + bad_counter $ns ns0out "packets 1 bytes 84" "check_counters 2" lret=1 fi expect="packets 1 bytes 104" cnt=$(ip netns exec $ns nft list counter inet filter ns0in6 | grep -q "$expect") if [ $? -ne 0 ]; then - bad_counter $ns ns0in6 "$expect" + bad_counter $ns ns0in6 "$expect" "check_counters 3" lret=1 fi cnt=$(ip netns exec $ns nft list counter inet filter ns0out6 | grep -q "$expect") if [ $? -ne 0 ]; then - bad_counter $ns ns0out6 "$expect" + bad_counter $ns ns0out6 "$expect" "check_counters 4" lret=1 fi @@ -107,41 +122,41 @@ check_ns0_counters() local ns=$1 local lret=0 - cnt=$(ip netns exec ns0 nft list counter inet filter ns0in | grep -q "packets 0 bytes 0") + cnt=$(ip netns exec "$ns0" nft list counter inet filter ns0in | grep -q "packets 0 bytes 0") if [ $? -ne 0 ]; then - bad_counter ns0 ns0in "packets 0 bytes 0" + bad_counter "$ns0" ns0in "packets 0 bytes 0" "check_ns0_counters 1" lret=1 fi - cnt=$(ip netns exec ns0 nft list counter inet filter ns0in6 | grep -q "packets 0 bytes 0") + cnt=$(ip netns exec "$ns0" nft list counter inet filter ns0in6 | grep -q "packets 0 bytes 0") if [ $? -ne 0 ]; then - bad_counter ns0 ns0in6 "packets 0 bytes 0" + bad_counter "$ns0" ns0in6 "packets 0 bytes 0" lret=1 fi - cnt=$(ip netns exec ns0 nft list counter inet filter ns0out | grep -q "packets 0 bytes 0") + cnt=$(ip netns exec "$ns0" nft list counter inet filter ns0out | grep -q "packets 0 bytes 0") if [ $? -ne 0 ]; then - bad_counter ns0 ns0out "packets 0 bytes 0" + bad_counter "$ns0" ns0out "packets 0 bytes 0" "check_ns0_counters 2" lret=1 fi - cnt=$(ip netns exec ns0 nft list counter inet filter ns0out6 | grep -q "packets 0 bytes 0") + cnt=$(ip netns exec "$ns0" nft list counter inet filter ns0out6 | grep -q "packets 0 bytes 0") if [ $? -ne 0 ]; then - bad_counter ns0 ns0out6 "packets 0 bytes 0" + bad_counter "$ns0" ns0out6 "packets 0 bytes 0" "check_ns0_counters3 " lret=1 fi for dir in "in" "out" ; do expect="packets 1 bytes 84" - cnt=$(ip netns exec ns0 nft list counter inet filter ${ns}${dir} | grep -q "$expect") + cnt=$(ip netns exec "$ns0" nft list counter inet filter ${ns}${dir} | grep -q "$expect") if [ $? -ne 0 ]; then - bad_counter ns0 $ns$dir "$expect" + bad_counter "$ns0" $ns$dir "$expect" "check_ns0_counters 4" lret=1 fi expect="packets 1 bytes 104" - cnt=$(ip netns exec ns0 nft list counter inet filter ${ns}${dir}6 | grep -q "$expect") + cnt=$(ip netns exec "$ns0" nft list counter inet filter ${ns}${dir}6 | grep -q "$expect") if [ $? -ne 0 ]; then - bad_counter ns0 $ns$dir6 "$expect" + bad_counter "$ns0" $ns$dir6 "$expect" "check_ns0_counters 5" lret=1 fi done @@ -152,7 +167,7 @@ check_ns0_counters() reset_counters() { for i in 0 1 2;do - ip netns exec ns$i nft reset counters inet > /dev/null + ip netns exec ns$i-$sfx nft reset counters inet > /dev/null done } @@ -166,7 +181,7 @@ test_local_dnat6() IPF="ip6" fi -ip netns exec ns0 nft -f - <<EOF +ip netns exec "$ns0" nft -f /dev/stdin <<EOF table $family nat { chain output { type nat hook output priority 0; policy accept; @@ -180,7 +195,7 @@ EOF fi # ping netns1, expect rewrite to netns2 - ip netns exec ns0 ping -q -c 1 dead:1::99 > /dev/null + ip netns exec "$ns0" ping -q -c 1 dead:1::99 > /dev/null if [ $? -ne 0 ]; then lret=1 echo "ERROR: ping6 failed" @@ -189,18 +204,18 @@ EOF expect="packets 0 bytes 0" for dir in "in6" "out6" ; do - cnt=$(ip netns exec ns0 nft list counter inet filter ns1${dir} | grep -q "$expect") + cnt=$(ip netns exec "$ns0" nft list counter inet filter ns1${dir} | grep -q "$expect") if [ $? -ne 0 ]; then - bad_counter ns0 ns1$dir "$expect" + bad_counter "$ns0" ns1$dir "$expect" "test_local_dnat6 1" lret=1 fi done expect="packets 1 bytes 104" for dir in "in6" "out6" ; do - cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect") + cnt=$(ip netns exec "$ns0" nft list counter inet filter ns2${dir} | grep -q "$expect") if [ $? -ne 0 ]; then - bad_counter ns0 ns2$dir "$expect" + bad_counter "$ns0" ns2$dir "$expect" "test_local_dnat6 2" lret=1 fi done @@ -208,9 +223,9 @@ EOF # expect 0 count in ns1 expect="packets 0 bytes 0" for dir in "in6" "out6" ; do - cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect") + cnt=$(ip netns exec "$ns1" nft list counter inet filter ns0${dir} | grep -q "$expect") if [ $? -ne 0 ]; then - bad_counter ns1 ns0$dir "$expect" + bad_counter "$ns1" ns0$dir "$expect" "test_local_dnat6 3" lret=1 fi done @@ -218,15 +233,15 @@ EOF # expect 1 packet in ns2 expect="packets 1 bytes 104" for dir in "in6" "out6" ; do - cnt=$(ip netns exec ns2 nft list counter inet filter ns0${dir} | grep -q "$expect") + cnt=$(ip netns exec "$ns2" nft list counter inet filter ns0${dir} | grep -q "$expect") if [ $? -ne 0 ]; then - bad_counter ns2 ns0$dir "$expect" + bad_counter "$ns2" ns0$dir "$expect" "test_local_dnat6 4" lret=1 fi done - test $lret -eq 0 && echo "PASS: ipv6 ping to ns1 was $family NATted to ns2" - ip netns exec ns0 nft flush chain ip6 nat output + test $lret -eq 0 && echo "PASS: ipv6 ping to $ns1 was $family NATted to $ns2" + ip netns exec "$ns0" nft flush chain ip6 nat output return $lret } @@ -241,7 +256,7 @@ test_local_dnat() IPF="ip" fi -ip netns exec ns0 nft -f - <<EOF 2>/dev/null +ip netns exec "$ns0" nft -f /dev/stdin <<EOF 2>/dev/null table $family nat { chain output { type nat hook output priority 0; policy accept; @@ -260,7 +275,7 @@ EOF fi # ping netns1, expect rewrite to netns2 - ip netns exec ns0 ping -q -c 1 10.0.1.99 > /dev/null + ip netns exec "$ns0" ping -q -c 1 10.0.1.99 > /dev/null if [ $? -ne 0 ]; then lret=1 echo "ERROR: ping failed" @@ -269,18 +284,18 @@ EOF expect="packets 0 bytes 0" for dir in "in" "out" ; do - cnt=$(ip netns exec ns0 nft list counter inet filter ns1${dir} | grep -q "$expect") + cnt=$(ip netns exec "$ns0" nft list counter inet filter ns1${dir} | grep -q "$expect") if [ $? -ne 0 ]; then - bad_counter ns0 ns1$dir "$expect" + bad_counter "$ns0" ns1$dir "$expect" "test_local_dnat 1" lret=1 fi done expect="packets 1 bytes 84" for dir in "in" "out" ; do - cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect") + cnt=$(ip netns exec "$ns0" nft list counter inet filter ns2${dir} | grep -q "$expect") if [ $? -ne 0 ]; then - bad_counter ns0 ns2$dir "$expect" + bad_counter "$ns0" ns2$dir "$expect" "test_local_dnat 2" lret=1 fi done @@ -288,9 +303,9 @@ EOF # expect 0 count in ns1 expect="packets 0 bytes 0" for dir in "in" "out" ; do - cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect") + cnt=$(ip netns exec "$ns1" nft list counter inet filter ns0${dir} | grep -q "$expect") if [ $? -ne 0 ]; then - bad_counter ns1 ns0$dir "$expect" + bad_counter "$ns1" ns0$dir "$expect" "test_local_dnat 3" lret=1 fi done @@ -298,19 +313,19 @@ EOF # expect 1 packet in ns2 expect="packets 1 bytes 84" for dir in "in" "out" ; do - cnt=$(ip netns exec ns2 nft list counter inet filter ns0${dir} | grep -q "$expect") + cnt=$(ip netns exec "$ns2" nft list counter inet filter ns0${dir} | grep -q "$expect") if [ $? -ne 0 ]; then - bad_counter ns2 ns0$dir "$expect" + bad_counter "$ns2" ns0$dir "$expect" "test_local_dnat 4" lret=1 fi done - test $lret -eq 0 && echo "PASS: ping to ns1 was $family NATted to ns2" + test $lret -eq 0 && echo "PASS: ping to $ns1 was $family NATted to $ns2" - ip netns exec ns0 nft flush chain $family nat output + ip netns exec "$ns0" nft flush chain $family nat output reset_counters - ip netns exec ns0 ping -q -c 1 10.0.1.99 > /dev/null + ip netns exec "$ns0" ping -q -c 1 10.0.1.99 > /dev/null if [ $? -ne 0 ]; then lret=1 echo "ERROR: ping failed" @@ -319,17 +334,17 @@ EOF expect="packets 1 bytes 84" for dir in "in" "out" ; do - cnt=$(ip netns exec ns0 nft list counter inet filter ns1${dir} | grep -q "$expect") + cnt=$(ip netns exec "$ns0" nft list counter inet filter ns1${dir} | grep -q "$expect") if [ $? -ne 0 ]; then - bad_counter ns1 ns1$dir "$expect" + bad_counter "$ns1" ns1$dir "$expect" "test_local_dnat 5" lret=1 fi done expect="packets 0 bytes 0" for dir in "in" "out" ; do - cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect") + cnt=$(ip netns exec "$ns0" nft list counter inet filter ns2${dir} | grep -q "$expect") if [ $? -ne 0 ]; then - bad_counter ns0 ns2$dir "$expect" + bad_counter "$ns0" ns2$dir "$expect" "test_local_dnat 6" lret=1 fi done @@ -337,9 +352,9 @@ EOF # expect 1 count in ns1 expect="packets 1 bytes 84" for dir in "in" "out" ; do - cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect") + cnt=$(ip netns exec "$ns1" nft list counter inet filter ns0${dir} | grep -q "$expect") if [ $? -ne 0 ]; then - bad_counter ns0 ns0$dir "$expect" + bad_counter "$ns0" ns0$dir "$expect" "test_local_dnat 7" lret=1 fi done @@ -347,14 +362,14 @@ EOF # expect 0 packet in ns2 expect="packets 0 bytes 0" for dir in "in" "out" ; do - cnt=$(ip netns exec ns2 nft list counter inet filter ns0${dir} | grep -q "$expect") + cnt=$(ip netns exec "$ns2" nft list counter inet filter ns0${dir} | grep -q "$expect") if [ $? -ne 0 ]; then - bad_counter ns2 ns2$dir "$expect" + bad_counter "$ns2" ns0$dir "$expect" "test_local_dnat 8" lret=1 fi done - test $lret -eq 0 && echo "PASS: ping to ns1 OK after $family nat output chain flush" + test $lret -eq 0 && echo "PASS: ping to $ns1 OK after $family nat output chain flush" return $lret } @@ -366,26 +381,26 @@ test_masquerade6() local natflags=$2 local lret=0 - ip netns exec ns0 sysctl net.ipv6.conf.all.forwarding=1 > /dev/null + ip netns exec "$ns0" sysctl net.ipv6.conf.all.forwarding=1 > /dev/null - ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1 + ip netns exec "$ns2" ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1 if [ $? -ne 0 ] ; then - echo "ERROR: cannot ping ns1 from ns2 via ipv6" + echo "ERROR: cannot ping $ns1 from $ns2 via ipv6" return 1 lret=1 fi expect="packets 1 bytes 104" for dir in "in6" "out6" ; do - cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect") if [ $? -ne 0 ]; then - bad_counter ns1 ns2$dir "$expect" + bad_counter "$ns1" ns2$dir "$expect" "test_masquerade6 1" lret=1 fi - cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect") + cnt=$(ip netns exec "$ns2" nft list counter inet filter ns1${dir} | grep -q "$expect") if [ $? -ne 0 ]; then - bad_counter ns2 ns1$dir "$expect" + bad_counter "$ns2" ns1$dir "$expect" "test_masquerade6 2" lret=1 fi done @@ -393,7 +408,7 @@ test_masquerade6() reset_counters # add masquerading rule -ip netns exec ns0 nft -f - <<EOF +ip netns exec "$ns0" nft -f /dev/stdin <<EOF table $family nat { chain postrouting { type nat hook postrouting priority 0; policy accept; @@ -406,24 +421,24 @@ EOF return $ksft_skip fi - ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1 + ip netns exec "$ns2" ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1 if [ $? -ne 0 ] ; then - echo "ERROR: cannot ping ns1 from ns2 with active $family masquerade $natflags" + echo "ERROR: cannot ping $ns1 from $ns2 with active $family masquerade $natflags" lret=1 fi # ns1 should have seen packets from ns0, due to masquerade expect="packets 1 bytes 104" for dir in "in6" "out6" ; do - cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect") + cnt=$(ip netns exec "$ns1" nft list counter inet filter ns0${dir} | grep -q "$expect") if [ $? -ne 0 ]; then - bad_counter ns1 ns0$dir "$expect" + bad_counter "$ns1" ns0$dir "$expect" "test_masquerade6 3" lret=1 fi - cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect") + cnt=$(ip netns exec "$ns2" nft list counter inet filter ns1${dir} | grep -q "$expect") if [ $? -ne 0 ]; then - bad_counter ns2 ns1$dir "$expect" + bad_counter "$ns2" ns1$dir "$expect" "test_masquerade6 4" lret=1 fi done @@ -431,32 +446,32 @@ EOF # ns1 should not have seen packets from ns2, due to masquerade expect="packets 0 bytes 0" for dir in "in6" "out6" ; do - cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect") if [ $? -ne 0 ]; then - bad_counter ns1 ns0$dir "$expect" + bad_counter "$ns1" ns0$dir "$expect" "test_masquerade6 5" lret=1 fi - cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + cnt=$(ip netns exec "$ns0" nft list counter inet filter ns1${dir} | grep -q "$expect") if [ $? -ne 0 ]; then - bad_counter ns2 ns1$dir "$expect" + bad_counter "$ns0" ns1$dir "$expect" "test_masquerade6 6" lret=1 fi done - ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1 + ip netns exec "$ns2" ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1 if [ $? -ne 0 ] ; then - echo "ERROR: cannot ping ns1 from ns2 with active ipv6 masquerade $natflags (attempt 2)" + echo "ERROR: cannot ping $ns1 from $ns2 with active ipv6 masquerade $natflags (attempt 2)" lret=1 fi - ip netns exec ns0 nft flush chain $family nat postrouting + ip netns exec "$ns0" nft flush chain $family nat postrouting if [ $? -ne 0 ]; then echo "ERROR: Could not flush $family nat postrouting" 1>&2 lret=1 fi - test $lret -eq 0 && echo "PASS: $family IPv6 masquerade $natflags for ns2" + test $lret -eq 0 && echo "PASS: $family IPv6 masquerade $natflags for $ns2" return $lret } @@ -467,26 +482,26 @@ test_masquerade() local natflags=$2 local lret=0 - ip netns exec ns0 sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null - ip netns exec ns0 sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null + ip netns exec "$ns0" sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null + ip netns exec "$ns0" sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null - ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1 + ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1 if [ $? -ne 0 ] ; then - echo "ERROR: cannot ping ns1 from ns2 $natflags" + echo "ERROR: cannot ping $ns1 from "$ns2" $natflags" lret=1 fi expect="packets 1 bytes 84" for dir in "in" "out" ; do - cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect") if [ $? -ne 0 ]; then - bad_counter ns1 ns2$dir "$expect" + bad_counter "$ns1" ns2$dir "$expect" "test_masquerade 1" lret=1 fi - cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect") + cnt=$(ip netns exec "$ns2" nft list counter inet filter ns1${dir} | grep -q "$expect") if [ $? -ne 0 ]; then - bad_counter ns2 ns1$dir "$expect" + bad_counter "$ns2" ns1$dir "$expect" "test_masquerade 2" lret=1 fi done @@ -494,7 +509,7 @@ test_masquerade() reset_counters # add masquerading rule -ip netns exec ns0 nft -f - <<EOF +ip netns exec "$ns0" nft -f /dev/stdin <<EOF table $family nat { chain postrouting { type nat hook postrouting priority 0; policy accept; @@ -507,24 +522,24 @@ EOF return $ksft_skip fi - ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1 + ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1 if [ $? -ne 0 ] ; then - echo "ERROR: cannot ping ns1 from ns2 with active $family masquerade $natflags" + echo "ERROR: cannot ping $ns1 from $ns2 with active $family masquerade $natflags" lret=1 fi # ns1 should have seen packets from ns0, due to masquerade expect="packets 1 bytes 84" for dir in "in" "out" ; do - cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect") + cnt=$(ip netns exec "$ns1" nft list counter inet filter ns0${dir} | grep -q "$expect") if [ $? -ne 0 ]; then - bad_counter ns1 ns0$dir "$expect" + bad_counter "$ns1" ns0$dir "$expect" "test_masquerade 3" lret=1 fi - cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect") + cnt=$(ip netns exec "$ns2" nft list counter inet filter ns1${dir} | grep -q "$expect") if [ $? -ne 0 ]; then - bad_counter ns2 ns1$dir "$expect" + bad_counter "$ns2" ns1$dir "$expect" "test_masquerade 4" lret=1 fi done @@ -532,32 +547,32 @@ EOF # ns1 should not have seen packets from ns2, due to masquerade expect="packets 0 bytes 0" for dir in "in" "out" ; do - cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect") if [ $? -ne 0 ]; then - bad_counter ns1 ns0$dir "$expect" + bad_counter "$ns1" ns0$dir "$expect" "test_masquerade 5" lret=1 fi - cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + cnt=$(ip netns exec "$ns0" nft list counter inet filter ns1${dir} | grep -q "$expect") if [ $? -ne 0 ]; then - bad_counter ns2 ns1$dir "$expect" + bad_counter "$ns0" ns1$dir "$expect" "test_masquerade 6" lret=1 fi done - ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1 + ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1 if [ $? -ne 0 ] ; then - echo "ERROR: cannot ping ns1 from ns2 with active ip masquerade $natflags (attempt 2)" + echo "ERROR: cannot ping $ns1 from $ns2 with active ip masquerade $natflags (attempt 2)" lret=1 fi - ip netns exec ns0 nft flush chain $family nat postrouting + ip netns exec "$ns0" nft flush chain $family nat postrouting if [ $? -ne 0 ]; then echo "ERROR: Could not flush $family nat postrouting" 1>&2 lret=1 fi - test $lret -eq 0 && echo "PASS: $family IP masquerade $natflags for ns2" + test $lret -eq 0 && echo "PASS: $family IP masquerade $natflags for $ns2" return $lret } @@ -567,25 +582,25 @@ test_redirect6() local family=$1 local lret=0 - ip netns exec ns0 sysctl net.ipv6.conf.all.forwarding=1 > /dev/null + ip netns exec "$ns0" sysctl net.ipv6.conf.all.forwarding=1 > /dev/null - ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1 + ip netns exec "$ns2" ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1 if [ $? -ne 0 ] ; then - echo "ERROR: cannnot ping ns1 from ns2 via ipv6" + echo "ERROR: cannnot ping $ns1 from $ns2 via ipv6" lret=1 fi expect="packets 1 bytes 104" for dir in "in6" "out6" ; do - cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect") if [ $? -ne 0 ]; then - bad_counter ns1 ns2$dir "$expect" + bad_counter "$ns1" ns2$dir "$expect" "test_redirect6 1" lret=1 fi - cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect") + cnt=$(ip netns exec "$ns2" nft list counter inet filter ns1${dir} | grep -q "$expect") if [ $? -ne 0 ]; then - bad_counter ns2 ns1$dir "$expect" + bad_counter "$ns2" ns1$dir "$expect" "test_redirect6 2" lret=1 fi done @@ -593,7 +608,7 @@ test_redirect6() reset_counters # add redirect rule -ip netns exec ns0 nft -f - <<EOF +ip netns exec "$ns0" nft -f /dev/stdin <<EOF table $family nat { chain prerouting { type nat hook prerouting priority 0; policy accept; @@ -606,18 +621,18 @@ EOF return $ksft_skip fi - ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1 + ip netns exec "$ns2" ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1 if [ $? -ne 0 ] ; then - echo "ERROR: cannot ping ns1 from ns2 via ipv6 with active $family redirect" + echo "ERROR: cannot ping $ns1 from $ns2 via ipv6 with active $family redirect" lret=1 fi # ns1 should have seen no packets from ns2, due to redirection expect="packets 0 bytes 0" for dir in "in6" "out6" ; do - cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect") if [ $? -ne 0 ]; then - bad_counter ns1 ns0$dir "$expect" + bad_counter "$ns1" ns0$dir "$expect" "test_redirect6 3" lret=1 fi done @@ -625,20 +640,20 @@ EOF # ns0 should have seen packets from ns2, due to masquerade expect="packets 1 bytes 104" for dir in "in6" "out6" ; do - cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect") + cnt=$(ip netns exec "$ns0" nft list counter inet filter ns2${dir} | grep -q "$expect") if [ $? -ne 0 ]; then - bad_counter ns1 ns0$dir "$expect" + bad_counter "$ns1" ns0$dir "$expect" "test_redirect6 4" lret=1 fi done - ip netns exec ns0 nft delete table $family nat + ip netns exec "$ns0" nft delete table $family nat if [ $? -ne 0 ]; then echo "ERROR: Could not delete $family nat table" 1>&2 lret=1 fi - test $lret -eq 0 && echo "PASS: $family IPv6 redirection for ns2" + test $lret -eq 0 && echo "PASS: $family IPv6 redirection for $ns2" return $lret } @@ -648,26 +663,26 @@ test_redirect() local family=$1 local lret=0 - ip netns exec ns0 sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null - ip netns exec ns0 sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null + ip netns exec "$ns0" sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null + ip netns exec "$ns0" sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null - ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1 + ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1 if [ $? -ne 0 ] ; then - echo "ERROR: cannot ping ns1 from ns2" + echo "ERROR: cannot ping $ns1 from $ns2" lret=1 fi expect="packets 1 bytes 84" for dir in "in" "out" ; do - cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect") if [ $? -ne 0 ]; then - bad_counter ns1 ns2$dir "$expect" + bad_counter "$ns1" $ns2$dir "$expect" "test_redirect 1" lret=1 fi - cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect") + cnt=$(ip netns exec "$ns2" nft list counter inet filter ns1${dir} | grep -q "$expect") if [ $? -ne 0 ]; then - bad_counter ns2 ns1$dir "$expect" + bad_counter "$ns2" ns1$dir "$expect" "test_redirect 2" lret=1 fi done @@ -675,7 +690,7 @@ test_redirect() reset_counters # add redirect rule -ip netns exec ns0 nft -f - <<EOF +ip netns exec "$ns0" nft -f /dev/stdin <<EOF table $family nat { chain prerouting { type nat hook prerouting priority 0; policy accept; @@ -688,9 +703,9 @@ EOF return $ksft_skip fi - ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1 + ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1 if [ $? -ne 0 ] ; then - echo "ERROR: cannot ping ns1 from ns2 with active $family ip redirect" + echo "ERROR: cannot ping $ns1 from $ns2 with active $family ip redirect" lret=1 fi @@ -698,9 +713,9 @@ EOF expect="packets 0 bytes 0" for dir in "in" "out" ; do - cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect") if [ $? -ne 0 ]; then - bad_counter ns1 ns0$dir "$expect" + bad_counter "$ns1" ns0$dir "$expect" "test_redirect 3" lret=1 fi done @@ -708,28 +723,28 @@ EOF # ns0 should have seen packets from ns2, due to masquerade expect="packets 1 bytes 84" for dir in "in" "out" ; do - cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect") + cnt=$(ip netns exec "$ns0" nft list counter inet filter ns2${dir} | grep -q "$expect") if [ $? -ne 0 ]; then - bad_counter ns1 ns0$dir "$expect" + bad_counter "$ns0" ns0$dir "$expect" "test_redirect 4" lret=1 fi done - ip netns exec ns0 nft delete table $family nat + ip netns exec "$ns0" nft delete table $family nat if [ $? -ne 0 ]; then echo "ERROR: Could not delete $family nat table" 1>&2 lret=1 fi - test $lret -eq 0 && echo "PASS: $family IP redirection for ns2" + test $lret -eq 0 && echo "PASS: $family IP redirection for $ns2" return $lret } -# ip netns exec ns0 ping -c 1 -q 10.0.$i.99 +# ip netns exec "$ns0" ping -c 1 -q 10.0.$i.99 for i in 0 1 2; do -ip netns exec ns$i nft -f - <<EOF +ip netns exec ns$i-$sfx nft -f /dev/stdin <<EOF table inet filter { counter ns0in {} counter ns1in {} @@ -796,18 +811,18 @@ done sleep 3 # test basic connectivity for i in 1 2; do - ip netns exec ns0 ping -c 1 -q 10.0.$i.99 > /dev/null + ip netns exec "$ns0" ping -c 1 -q 10.0.$i.99 > /dev/null if [ $? -ne 0 ];then echo "ERROR: Could not reach other namespace(s)" 1>&2 ret=1 fi - ip netns exec ns0 ping -c 1 -q dead:$i::99 > /dev/null + ip netns exec "$ns0" ping -c 1 -q dead:$i::99 > /dev/null if [ $? -ne 0 ];then echo "ERROR: Could not reach other namespace(s) via ipv6" 1>&2 ret=1 fi - check_counters ns$i + check_counters ns$i-$sfx if [ $? -ne 0 ]; then ret=1 fi @@ -820,7 +835,7 @@ for i in 1 2; do done if [ $ret -eq 0 ];then - echo "PASS: netns routing/connectivity: ns0 can reach ns1 and ns2" + echo "PASS: netns routing/connectivity: $ns0 can reach $ns1 and $ns2" fi reset_counters @@ -846,4 +861,9 @@ reset_counters $test_inet_nat && test_redirect inet $test_inet_nat && test_redirect6 inet +if [ $ret -ne 0 ];then + echo -n "FAIL: " + nft --version +fi + exit $ret -- 2.20.1

5 years, 5 months

1
0
0 0

[PATCH bpf] libbpf: Fix build on read-only filesystems

by Namhyung Kim

I got the following error when I tried to build perf on a read-only filesystem with O=dir option. $ cd /some/where/ro/linux/tools/perf $ make O=$HOME/build/perf ... CC /home/namhyung/build/perf/lib.o /bin/sh: bpf_helper_defs.h: Read-only file system make[3]: *** [Makefile:184: bpf_helper_defs.h] Error 1 make[2]: *** [Makefile.perf:778: /home/namhyung/build/perf/libbpf.a] Error 2 make[2]: *** Waiting for unfinished jobs.... LD /home/namhyung/build/perf/libperf-in.o AR /home/namhyung/build/perf/libperf.a PERF_VERSION = 5.4.0 make[1]: *** [Makefile.perf:225: sub-make] Error 2 make: *** [Makefile:70: all] Error 2 It was becaused bpf_helper_defs.h was generated in current directory. Move it to OUTPUT directory. Signed-off-by: Namhyung Kim <namhyung(a)kernel.org> --- tools/lib/bpf/Makefile | 15 ++++++++------- tools/testing/selftests/bpf/Makefile | 6 +++--- 2 files changed, 11 insertions(+), 10 deletions(-) diff --git a/tools/lib/bpf/Makefile b/tools/lib/bpf/Makefile index defae23a0169..97830e46d1a0 100644 --- a/tools/lib/bpf/Makefile +++ b/tools/lib/bpf/Makefile @@ -138,6 +138,7 @@ STATIC_OBJDIR := $(OUTPUT)staticobjs/ BPF_IN_SHARED := $(SHARED_OBJDIR)libbpf-in.o BPF_IN_STATIC := $(STATIC_OBJDIR)libbpf-in.o VERSION_SCRIPT := libbpf.map +BPF_HELPER_DEFS := $(OUTPUT)bpf_helper_defs.h LIB_TARGET := $(addprefix $(OUTPUT),$(LIB_TARGET)) LIB_FILE := $(addprefix $(OUTPUT),$(LIB_FILE)) @@ -159,7 +160,7 @@ all: fixdep all_cmd: $(CMD_TARGETS) check -$(BPF_IN_SHARED): force elfdep bpfdep bpf_helper_defs.h +$(BPF_IN_SHARED): force elfdep bpfdep $(BPF_HELPER_DEFS) @(test -f ../../include/uapi/linux/bpf.h -a -f ../../../include/uapi/linux/bpf.h && ( \ (diff -B ../../include/uapi/linux/bpf.h ../../../include/uapi/linux/bpf.h >/dev/null) || \ echo "Warning: Kernel ABI header at 'tools/include/uapi/linux/bpf.h' differs from latest version at 'include/uapi/linux/bpf.h'" >&2 )) || true @@ -177,12 +178,12 @@ $(BPF_IN_SHARED): force elfdep bpfdep bpf_helper_defs.h echo "Warning: Kernel ABI header at 'tools/include/uapi/linux/if_xdp.h' differs from latest version at 'include/uapi/linux/if_xdp.h'" >&2 )) || true $(Q)$(MAKE) $(build)=libbpf OUTPUT=$(SHARED_OBJDIR) CFLAGS="$(CFLAGS) $(SHLIB_FLAGS)" -$(BPF_IN_STATIC): force elfdep bpfdep bpf_helper_defs.h +$(BPF_IN_STATIC): force elfdep bpfdep $(BPF_HELPER_DEFS) $(Q)$(MAKE) $(build)=libbpf OUTPUT=$(STATIC_OBJDIR) -bpf_helper_defs.h: $(srctree)/tools/include/uapi/linux/bpf.h +$(BPF_HELPER_DEFS): $(srctree)/tools/include/uapi/linux/bpf.h $(Q)$(srctree)/scripts/bpf_helpers_doc.py --header \ - --file $(srctree)/tools/include/uapi/linux/bpf.h > bpf_helper_defs.h + --file $(srctree)/tools/include/uapi/linux/bpf.h > $(BPF_HELPER_DEFS) $(OUTPUT)libbpf.so: $(OUTPUT)libbpf.so.$(LIBBPF_VERSION) @@ -243,7 +244,7 @@ install_lib: all_cmd $(call do_install_mkdir,$(libdir_SQ)); \ cp -fpR $(LIB_FILE) $(DESTDIR)$(libdir_SQ) -install_headers: bpf_helper_defs.h +install_headers: $(BPF_HELPER_DEFS) $(call QUIET_INSTALL, headers) \ $(call do_install,bpf.h,$(prefix)/include/bpf,644); \ $(call do_install,libbpf.h,$(prefix)/include/bpf,644); \ @@ -251,7 +252,7 @@ install_headers: bpf_helper_defs.h $(call do_install,libbpf_util.h,$(prefix)/include/bpf,644); \ $(call do_install,xsk.h,$(prefix)/include/bpf,644); \ $(call do_install,bpf_helpers.h,$(prefix)/include/bpf,644); \ - $(call do_install,bpf_helper_defs.h,$(prefix)/include/bpf,644); \ + $(call do_install,$(BPF_HELPER_DEFS),$(prefix)/include/bpf,644); \ $(call do_install,bpf_tracing.h,$(prefix)/include/bpf,644); \ $(call do_install,bpf_endian.h,$(prefix)/include/bpf,644); \ $(call do_install,bpf_core_read.h,$(prefix)/include/bpf,644); @@ -271,7 +272,7 @@ install: install_lib install_pkgconfig clean: $(call QUIET_CLEAN, libbpf) $(RM) -rf $(CMD_TARGETS) \ *.o *~ *.a *.so *.so.$(LIBBPF_MAJOR_VERSION) .*.d .*.cmd \ - *.pc LIBBPF-CFLAGS bpf_helper_defs.h \ + *.pc LIBBPF-CFLAGS $(BPF_HELPER_DEFS) \ $(SHARED_OBJDIR) $(STATIC_OBJDIR) $(call QUIET_CLEAN, core-gen) $(RM) $(OUTPUT)FEATURE-DUMP.libbpf diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile index e0fe01d9ec33..e2fd6f8d579c 100644 --- a/tools/testing/selftests/bpf/Makefile +++ b/tools/testing/selftests/bpf/Makefile @@ -120,9 +120,9 @@ $(OUTPUT)/test_cgroup_attach: cgroup_helpers.c $(BPFOBJ): force $(MAKE) -C $(BPFDIR) OUTPUT=$(OUTPUT)/ -BPF_HELPERS := $(BPFDIR)/bpf_helper_defs.h $(wildcard $(BPFDIR)/bpf_*.h) -$(BPFDIR)/bpf_helper_defs.h: - $(MAKE) -C $(BPFDIR) OUTPUT=$(OUTPUT)/ bpf_helper_defs.h +BPF_HELPERS := $(OUTPUT)/bpf_helper_defs.h $(wildcard $(BPFDIR)/bpf_*.h) +$(OUTPUT)/bpf_helper_defs.h: + $(MAKE) -C $(BPFDIR) OUTPUT=$(OUTPUT)/ $(OUTPUT)/bpf_helper_defs.h # Get Clang's default includes on this system, as opposed to those seen by # '-target bpf'. This fixes "missing" files on some architectures/distros, -- 2.24.1.735.g03f4e72817-goog

5 years, 6 months

3
6
0 0

[PATCH v2 3/3] selftests/cgroup: add tests for cloning into cgroups

by Christian Brauner

Expand the cgroup test-suite to include tests for CLONE_INTO_CGROUP. This adds the following tests: - CLONE_INTO_CGROUP manages to clone a process directly into a correctly delegated cgroup - CLONE_INTO_CGROUP fails to clone a process into a cgroup that has been removed after we've opened an fd to it - CLONE_INTO_CGROUP fails to clone a process into an invalid domain cgroup - CLONE_INTO_CGROUP adheres to the no internal process constraint - CLONE_INTO_CGROUP works with the freezer feature Cc: Roman Gushchin <guro(a)fb.com> Cc: Tejun Heo <tj(a)kernel.org> Cc: Shuah Khan <shuah(a)kernel.org> Cc: cgroups(a)vger.kernel.org Cc: linux-kselftest(a)vger.kernel.org Signed-off-by: Christian Brauner <christian.brauner(a)ubuntu.com> --- /* v1 */ Link: https://lore.kernel.org/r/20191218173516.7875-4-christian.brauner@ubuntu.com /* v2 */ unchanged --- tools/testing/selftests/cgroup/Makefile | 6 +- tools/testing/selftests/cgroup/cgroup_util.c | 126 ++++++++++++++++++ tools/testing/selftests/cgroup/cgroup_util.h | 4 + tools/testing/selftests/cgroup/test_core.c | 64 +++++++++ .../selftests/clone3/clone3_selftests.h | 19 ++- 5 files changed, 214 insertions(+), 5 deletions(-) diff --git a/tools/testing/selftests/cgroup/Makefile b/tools/testing/selftests/cgroup/Makefile index 66aafe1f5746..967f268fde74 100644 --- a/tools/testing/selftests/cgroup/Makefile +++ b/tools/testing/selftests/cgroup/Makefile @@ -11,6 +11,6 @@ TEST_GEN_PROGS += test_freezer include ../lib.mk -$(OUTPUT)/test_memcontrol: cgroup_util.c -$(OUTPUT)/test_core: cgroup_util.c -$(OUTPUT)/test_freezer: cgroup_util.c +$(OUTPUT)/test_memcontrol: cgroup_util.c ../clone3/clone3_selftests.h +$(OUTPUT)/test_core: cgroup_util.c ../clone3/clone3_selftests.h +$(OUTPUT)/test_freezer: cgroup_util.c ../clone3/clone3_selftests.h diff --git a/tools/testing/selftests/cgroup/cgroup_util.c b/tools/testing/selftests/cgroup/cgroup_util.c index 8f7131dcf1ff..8a637ca7d73a 100644 --- a/tools/testing/selftests/cgroup/cgroup_util.c +++ b/tools/testing/selftests/cgroup/cgroup_util.c @@ -15,6 +15,7 @@ #include <unistd.h> #include "cgroup_util.h" +#include "../clone3/clone3_selftests.h" static ssize_t read_text(const char *path, char *buf, size_t max_len) { @@ -331,12 +332,112 @@ int cg_run(const char *cgroup, } } +pid_t clone_into_cgroup(int cgroup_fd) +{ +#ifdef CLONE_ARGS_SIZE_VER2 + pid_t pid; + + struct clone_args args = { + .flags = CLONE_INTO_CGROUP, + .exit_signal = SIGCHLD, + .cgroup = cgroup_fd, + }; + + pid = sys_clone3(&args, sizeof(struct clone_args)); + /* + * Verify that this is a genuine test failure: + * ENOSYS -> clone3() not available + * E2BIG -> CLONE_INTO_CGROUP not available + */ + if (pid < 0 && (errno == ENOSYS || errno == E2BIG)) + goto pretend_enosys; + + return pid; + +pretend_enosys: +#endif + errno = ENOSYS; + return -ENOSYS; +} + +int clone_reap(pid_t pid, int options) +{ + int ret; + siginfo_t info = { + .si_signo = 0, + }; + +again: + ret = waitid(P_PID, pid, &info, options | __WALL | __WNOTHREAD); + if (ret < 0) { + if (errno == EINTR) + goto again; + return -1; + } + + if (options & WEXITED) { + if (WIFEXITED(info.si_status)) + return WEXITSTATUS(info.si_status); + } + + if (options & WSTOPPED) { + if (WIFSTOPPED(info.si_status)) + return WSTOPSIG(info.si_status); + } + + if (options & WCONTINUED) { + if (WIFCONTINUED(info.si_status)) + return 0; + } + + return -1; +} + +int dirfd_open_opath(const char *dir) +{ + return open(dir, O_DIRECTORY | O_CLOEXEC | O_NOFOLLOW | O_PATH); +} + +#define close_prot_errno(fd) \ + if (fd >= 0) { \ + int _e_ = errno; \ + close(fd); \ + errno = _e_; \ + } + +static int clone_into_cgroup_run_nowait(const char *cgroup, + int (*fn)(const char *cgroup, void *arg), + void *arg) +{ + int cgroup_fd; + pid_t pid; + + cgroup_fd = dirfd_open_opath(cgroup); + if (cgroup_fd < 0) + return -1; + + pid = clone_into_cgroup(cgroup_fd); + close_prot_errno(cgroup_fd); + if (pid == 0) + exit(fn(cgroup, arg)); + + return pid; +} + int cg_run_nowait(const char *cgroup, int (*fn)(const char *cgroup, void *arg), void *arg) { int pid; + pid = clone_into_cgroup_run_nowait(cgroup, fn, arg); + if (pid > 0) + return pid; + + /* Genuine test failure. */ + if (pid < 0 && errno != ENOSYS) + return -1; + pid = fork(); if (pid == 0) { char buf[64]; @@ -450,3 +551,28 @@ int proc_read_strstr(int pid, bool thread, const char *item, const char *needle) return strstr(buf, needle) ? 0 : -1; } + +int clone_into_cgroup_run_wait(const char *cgroup) +{ + int cgroup_fd; + pid_t pid; + + cgroup_fd = dirfd_open_opath(cgroup); + if (cgroup_fd < 0) + return -1; + + pid = clone_into_cgroup(cgroup_fd); + close_prot_errno(cgroup_fd); + if (pid < 0) + return -1; + + if (pid == 0) + exit(EXIT_SUCCESS); + + /* + * We don't care whether this fails. We only care whether the initial + * clone succeeded. + */ + (void)clone_reap(pid, WEXITED); + return 0; +} diff --git a/tools/testing/selftests/cgroup/cgroup_util.h b/tools/testing/selftests/cgroup/cgroup_util.h index 49c54fbdb229..5a1305dd1f0b 100644 --- a/tools/testing/selftests/cgroup/cgroup_util.h +++ b/tools/testing/selftests/cgroup/cgroup_util.h @@ -50,3 +50,7 @@ extern int cg_wait_for_proc_count(const char *cgroup, int count); extern int cg_killall(const char *cgroup); extern ssize_t proc_read_text(int pid, bool thread, const char *item, char *buf, size_t size); extern int proc_read_strstr(int pid, bool thread, const char *item, const char *needle); +extern pid_t clone_into_cgroup(int cgroup_fd); +extern int clone_reap(pid_t pid, int options); +extern int clone_into_cgroup_run_wait(const char *cgroup); +extern int dirfd_open_opath(const char *dir); diff --git a/tools/testing/selftests/cgroup/test_core.c b/tools/testing/selftests/cgroup/test_core.c index c5ca669feb2b..96e016ccafe0 100644 --- a/tools/testing/selftests/cgroup/test_core.c +++ b/tools/testing/selftests/cgroup/test_core.c @@ -25,8 +25,11 @@ static int test_cgcore_populated(const char *root) { int ret = KSFT_FAIL; + int err; char *cg_test_a = NULL, *cg_test_b = NULL; char *cg_test_c = NULL, *cg_test_d = NULL; + int cgroup_fd = -EBADF; + pid_t pid; cg_test_a = cg_name(root, "cg_test_a"); cg_test_b = cg_name(root, "cg_test_a/cg_test_b"); @@ -78,6 +81,52 @@ static int test_cgcore_populated(const char *root) if (cg_read_strcmp(cg_test_d, "cgroup.events", "populated 0\n")) goto cleanup; + /* Test that we can directly clone into a new cgroup. */ + cgroup_fd = dirfd_open_opath(cg_test_d); + if (cgroup_fd < 0) + goto cleanup; + + pid = clone_into_cgroup(cgroup_fd); + if (pid < 0) { + if (errno == ENOSYS) + goto cleanup_pass; + goto cleanup; + } + + if (pid == 0) { + if (raise(SIGSTOP)) + exit(EXIT_FAILURE); + exit(EXIT_SUCCESS); + } + + err = cg_read_strcmp(cg_test_d, "cgroup.events", "populated 1\n"); + + (void)clone_reap(pid, WSTOPPED); + (void)kill(pid, SIGCONT); + (void)clone_reap(pid, WEXITED); + + if (err) + goto cleanup; + + if (cg_read_strcmp(cg_test_d, "cgroup.events", "populated 0\n")) + goto cleanup; + + /* Remove cgroup. */ + if (cg_test_d) { + cg_destroy(cg_test_d); + free(cg_test_d); + cg_test_d = NULL; + } + + pid = clone_into_cgroup(cgroup_fd); + if (pid < 0) + goto cleanup_pass; + if (pid == 0) + exit(EXIT_SUCCESS); + (void)clone_reap(pid, WEXITED); + goto cleanup; + +cleanup_pass: ret = KSFT_PASS; cleanup: @@ -93,6 +142,8 @@ static int test_cgcore_populated(const char *root) free(cg_test_c); free(cg_test_b); free(cg_test_a); + if (cgroup_fd >= 0) + close(cgroup_fd); return ret; } @@ -136,6 +187,16 @@ static int test_cgcore_invalid_domain(const char *root) if (errno != EOPNOTSUPP) goto cleanup; + if (!clone_into_cgroup_run_wait(child)) + goto cleanup; + + if (errno == ENOSYS) + goto cleanup_pass; + + if (errno != EOPNOTSUPP) + goto cleanup; + +cleanup_pass: ret = KSFT_PASS; cleanup: @@ -345,6 +406,9 @@ static int test_cgcore_internal_process_constraint(const char *root) if (!cg_enter_current(parent)) goto cleanup; + if (!clone_into_cgroup_run_wait(parent)) + goto cleanup; + ret = KSFT_PASS; cleanup: diff --git a/tools/testing/selftests/clone3/clone3_selftests.h b/tools/testing/selftests/clone3/clone3_selftests.h index a3f2c8ad8bcc..91c1a78ddb39 100644 --- a/tools/testing/selftests/clone3/clone3_selftests.h +++ b/tools/testing/selftests/clone3/clone3_selftests.h @@ -5,12 +5,24 @@ #define _GNU_SOURCE #include <sched.h> +#include <linux/sched.h> +#include <linux/types.h> #include <stdint.h> #include <syscall.h> -#include <linux/types.h> +#include <sys/wait.h> + +#include "../kselftest.h" #define ptr_to_u64(ptr) ((__u64)((uintptr_t)(ptr))) +#ifndef CLONE_INTO_CGROUP +#define CLONE_INTO_CGROUP 0x200000000ULL /* Clone into a specific cgroup given the right permissions. */ +#endif + +#ifndef CLONE_ARGS_SIZE_VER0 +#define CLONE_ARGS_SIZE_VER0 64 +#endif + #ifndef __NR_clone3 #define __NR_clone3 -1 struct clone_args { @@ -22,10 +34,13 @@ struct clone_args { __aligned_u64 stack; __aligned_u64 stack_size; __aligned_u64 tls; +#define CLONE_ARGS_SIZE_VER1 80 __aligned_u64 set_tid; __aligned_u64 set_tid_size; +#define CLONE_ARGS_SIZE_VER2 88 + __aligned_u64 cgroup; }; -#endif +#endif /* __NR_clone3 */ static pid_t sys_clone3(struct clone_args *args, size_t size) { -- 2.24.0

5 years, 6 months

1
0
0 0

[PATCH v4 00/19] x86/cpu: Clean up handling of VMX features

by Sean Christopherson

Clean up a handful of interrelated warts in the kernel's handling of VMX: - Enable VMX in IA32_FEATURE_CONTROL during boot instead of on-demand during KVM load to avoid future contention over IA32_FEATURE_CONTROL. - Rework VMX feature reporting so that it is accurate and up-to-date, now and in the future. - Consolidate code across CPUs that support VMX. This series stems from two separate but related issues. The first issue, pointed out by Boris in the SGX enabling series[1], is that the kernel currently doesn't ensure the IA32_FEATURE_CONTROL MSR is configured during boot. The second issue is that the kernel's reporting of VMX features is stale, potentially inaccurate, and difficult to maintain. v4: - Rebase to tip/master, 8a1b070333f4 ("Merge branch 'WIP.x86/mm'") - Rename everything feature control related to IA32_FEAT_CTL. [Boris] - Minor coding style tweaks [Boris and Jarkko]. - Print VMX feature flags in "vmx flags" to avoid polluting "flags", but keep printing the current synthetic VMX in "flags" so as not to break the ABI. [Boris] - Don't bother printing an error message in the extremely unlikely event VMX is supported but IA32_FEAT_CTL doesn't exist. [Boris] - Beef up a few changelogs and comments. [Boris] - Add a comment in the LMCE code for the new WARN. [Jarkko] - Check CONFIG_KVM_INTEL instead of CONFIG_KVM when deciding whether or not to enable VMX. - Add a patch to introduce X86_FEATURE_MSR_IA32_FEAT_CTL. - Dropped Jim's Reviewed-by from a few KVM patches due to the above addition. v3: - Rebase to tip/master, ceceaf1f12ba ("Merge branch 'WIP.x86/cleanups'"). - Rename the feature control MSR bit defines [Boris]. - Rewrite the error message displayed when reading feature control MSR faults on a VMX capable CPU to explicitly state that it's likely a hardware or hypervisor issue [Boris]. - Collect a Reviewed-by for the LMCE change [Boris]. - Enable VMX in feature control (if it's unlocked) if and only if KVM is enabled [Paolo]. - Remove a big pile of redudant MSR defines from the KVM selftests that was discovered when renaming the feature control defines. - Fix a changelog typoe [Boris]. v2: - Rebase to latest tip/x86/cpu (1edae1ae6258, "x86/Kconfig: Enforce...) - Collect Jim's reviews. - Fix a typo in setting of EPT capabilities [TonyWWang-oc]. - Remove defines for reserved VMX feature flags [Paolo]. - Print the VMX features under "flags" and maintain all existing names to be backward compatible with the ABI [Paolo]. - Create aggregate APIC features to report FLEXPRIORITY and APICV, so that the full feature *and* their associated individual features are printed, e.g. to aid in recognizing why an APIC feature isn't being used. - Fix a few copy paste errors in changelogs. v1 cover letter: == IA32_FEATURE_CONTROL == Lack of IA32_FEATURE_CONTROL configuration during boot isn't a functional issue in the current kernel as the majority of platforms set and lock IA32_FEATURE_CONTROL in firmware. And when the MSR is left unlocked, KVM is the only subsystem that writes IA32_FEATURE_CONTROL. That will change if/when SGX support is enabled, as SGX will also want to fully enable itself when IA32_FEATURE_CONTROL is unlocked. == VMX Feature Reporting == VMX features are not enumerated via CPUID, but instead are enumerated through VMX MSRs. As a result, new VMX features are not automatically reported via /proc/cpuinfo. An attempt was made long ago to report interesting and/or meaningful VMX features by synthesizing select features into a Linux-defined cpufeatures word. Synthetic feature flags worked for the initial purpose, but the existence of the synthetic flags was forgotten almost immediately, e.g. only one new flag (EPT A/D) has been added in the the decade since the synthetic VMX features were introduced, while VMX and KVM have gained support for many new features. Placing the synthetic flags in x86_capability also allows them to be queried via cpu_has() and company, which is misleading as the flags exist purely for reporting via /proc/cpuinfo. KVM, the only in-kernel user of VMX, ignores the flags. Last but not least, VMX features are reported in /proc/cpuinfo even when VMX is unusable due to lack of enabling in IA32_FEATURE_CONTROL. == Caveats == All of the testing of non-standard flows was done in a VM, as I don't have a system that leaves IA32_FEATURE_CONTROL unlocked, or locks it with VMX disabled. The Centaur and Zhaoxin changes are somewhat speculative, as I haven't confirmed they actually support IA32_FEATURE_CONTROL, or that they want to gain "official" KVM support. I assume they unofficially support KVM given that both CPUs went through the effort of enumerating VMX features. That in turn would require them to support IA32_FEATURE_CONTROL since KVM will fault and refuse to load if the MSR doesn't exist. [1] https://lkml.kernel.org/r/20190925085156.GA3891@zn.tnic Sean Christopherson (19): x86/msr-index: Clean up bit defines for IA32_FEATURE_CONTROL MSR selftests: kvm: Replace manual MSR defs with common msr-index.h tools arch x86: Sync msr-index.h from kernel sources x86/intel: Initialize IA32_FEAT_CTL MSR at boot x86/mce: WARN once if IA32_FEAT_CTL MSR is left unlocked x86/centaur: Use common IA32_FEAT_CTL MSR initialization x86/zhaoxin: Use common IA32_FEAT_CTL MSR initialization x86/cpu: Clear VMX feature flag if VMX is not fully enabled x86/vmx: Introduce VMX_FEATURES_* x86/cpu: Detect VMX features on Intel, Centaur and Zhaoxin CPUs x86/cpu: Print VMX flags in /proc/cpuinfo using VMX_FEATURES_* x86/cpu: Set synthetic VMX cpufeatures during init_ia32_feat_ctl() x86/cpufeatures: Add flag to track whether MSR IA32_FEAT_CTL is configured KVM: VMX: Drop initialization of IA32_FEAT_CTL MSR KVM: VMX: Use VMX feature flag to query BIOS enabling KVM: VMX: Check for full VMX support when verifying CPU compatibility KVM: VMX: Use VMX_FEATURE_* flags to define VMCS control bits perf/x86: Provide stubs of KVM helpers for non-Intel CPUs KVM: VMX: Allow KVM_INTEL when building for Centaur and/or Zhaoxin CPUs MAINTAINERS | 2 +- arch/x86/Kconfig.cpu | 8 + arch/x86/boot/mkcpustr.c | 1 + arch/x86/include/asm/cpufeatures.h | 1 + arch/x86/include/asm/msr-index.h | 14 +- arch/x86/include/asm/perf_event.h | 22 +- arch/x86/include/asm/processor.h | 4 + arch/x86/include/asm/vmx.h | 105 +-- arch/x86/include/asm/vmxfeatures.h | 86 +++ arch/x86/kernel/cpu/Makefile | 6 +- arch/x86/kernel/cpu/centaur.c | 35 +- arch/x86/kernel/cpu/common.c | 3 + arch/x86/kernel/cpu/cpu.h | 4 + arch/x86/kernel/cpu/feat_ctl.c | 140 ++++ arch/x86/kernel/cpu/intel.c | 49 +- arch/x86/kernel/cpu/mce/intel.c | 15 +- arch/x86/kernel/cpu/mkcapflags.sh | 15 +- arch/x86/kernel/cpu/proc.c | 15 + arch/x86/kernel/cpu/zhaoxin.c | 35 +- arch/x86/kvm/Kconfig | 10 +- arch/x86/kvm/vmx/nested.c | 4 +- arch/x86/kvm/vmx/vmx.c | 67 +- arch/x86/kvm/vmx/vmx.h | 2 +- arch/x86/kvm/x86.c | 2 +- tools/arch/x86/include/asm/msr-index.h | 30 +- tools/power/x86/turbostat/turbostat.c | 4 +- tools/testing/selftests/kvm/Makefile | 4 +- .../selftests/kvm/include/x86_64/processor.h | 726 +----------------- tools/testing/selftests/kvm/lib/x86_64/vmx.c | 8 +- 29 files changed, 431 insertions(+), 986 deletions(-) create mode 100644 arch/x86/include/asm/vmxfeatures.h create mode 100644 arch/x86/kernel/cpu/feat_ctl.c -- 2.24.0

5 years, 6 months

6
45
0 0

[PATCH v2 0/2] openat2: minor uapi cleanups

by Aleksa Sarai

Patch changelog: v2: * Add include <linux/types.h> to openat2.h. [Florian Weimer] * Move OPEN_HOW_SIZE_* constants out of UAPI. [Florian Weimer] * Switch from __aligned_u64 to __u64 since it isn't necessary. [David Laight] v1: <https://lore.kernel.org/lkml/20191219105533.12508-1-cyphar@cyphar.com/> While openat2(2) is still not yet in Linus's tree, we can take this opportunity to iron out some small warts that weren't noticed earlier: * A fix was suggested by Florian Weimer, to separate the openat2 definitions so glibc can use the header directly. I've put the maintainership under VFS but let me know if you'd prefer it belong ot the fcntl folks. * Having heterogenous field sizes in an extensible struct results in "padding hole" problems when adding new fields (in addition the correct error to use for non-zero padding isn't entirely clear ). The simplest solution is to just copy clone(3)'s model -- always use u64s. It will waste a little more space in the struct, but it removes a possible future headache. Aleksa Sarai (2): openat2: drop open_how->__padding field uapi: split openat2(2) definitions from fcntl.h MAINTAINERS | 1 + fs/open.c | 2 - include/linux/fcntl.h | 4 ++ include/uapi/linux/fcntl.h | 37 +----------------- include/uapi/linux/openat2.h | 39 +++++++++++++++++++ tools/testing/selftests/openat2/helpers.h | 7 ++-- .../testing/selftests/openat2/openat2_test.c | 24 ++++-------- 7 files changed, 56 insertions(+), 58 deletions(-) create mode 100644 include/uapi/linux/openat2.h base-commit: 912dfe068c43fa13c587b8d30e73d335c5ba7d44 -- 2.24.0

5 years, 6 months

2
3
0 0

[PATCH 0/2] openat2: minor uapi cleanups

by Aleksa Sarai

While openat2(2) is still not yet in Linus's tree, we can take this opportunity to iron out some small warts that weren't noticed earlier: * A fix was suggested by Florian Weimer, to separate the openat2 definitions so glibc can use the header directly. I've put the maintainership under VFS but let me know if you'd prefer it belong ot the fcntl folks. * Having heterogenous field sizes in an extensible struct results in "padding hole" problems when adding new fields (in addition the correct error to use for non-zero padding isn't entirely clear ). The simplest solution is to just copy clone(3)'s model -- always use u64s. It will waste a little more space in the struct, but it removes a possible future headache. Aleksa Sarai (2): uapi: split openat2(2) definitions from fcntl.h openat2: drop open_how->__padding field MAINTAINERS | 1 + fs/open.c | 2 - include/uapi/linux/fcntl.h | 37 +---------------- include/uapi/linux/openat2.h | 40 +++++++++++++++++++ tools/testing/selftests/openat2/helpers.h | 3 +- .../testing/selftests/openat2/openat2_test.c | 24 ++++------- 6 files changed, 51 insertions(+), 56 deletions(-) create mode 100644 include/uapi/linux/openat2.h base-commit: 912dfe068c43fa13c587b8d30e73d335c5ba7d44 -- 2.24.0

5 years, 6 months

4
13
0 0

[PATCH v6 0/6] Fix nits in the kunit

by SeongJae Park

This patchset contains trivial fixes for the kunit documentations and the wrapper python scripts. Baseline -------- This patchset is based on 'kselftest/fixes' branch of linux-kselftest[1]. A complete tree is available at my repo: https://github.com/sjp38/linux/tree/kunit_fix/20191205_v6 Version History --------------- Changes from v5 (https://lore.kernel.org/linux-kselftest/20191205093440.21824-1-sjpark@amazo…): - Rebased on kselftest/fixes - Add 'Reviewed-by' and 'Tested-by' from Brendan Higgins Changes from v4 (https://lore.kernel.org/linux-doc/1575490683-13015-1-git-send-email-sj38.pa…): - Rebased on Heidi Fahim's patch[2] - Fix failing kunit_tool_test test - Add 'build_dir' option test in 'kunit_tool_test.py' Changes from v3 (https://lore.kernel.org/linux-kselftest/20191204192141.GA247851@google.com): - Fix the 4th patch, "kunit: Place 'test.log' under the 'build_dir'" to set default value of 'build_dir' as '' instead of NULL so that kunit can run even though '--build_dir' option is not given. Changes from v2 (https://lore.kernel.org/linux-kselftest/1575361141-6806-1-git-send-email-sj…): - Make 'build_dir' if not exists (missed from v3 by mistake) Changes from v1 (https://lore.kernel.org/linux-doc/1575242724-4937-1-git-send-email-sj38.par…): - Remove "docs/kunit/start: Skip wrapper run command" (A similar approach is ongoing) - Make 'build_dir' if not exists SeongJae Park (6): docs/kunit/start: Use in-tree 'kunit_defconfig' kunit: Remove duplicated defconfig creation kunit: Create default config in '--build_dir' kunit: Place 'test.log' under the 'build_dir' kunit: Rename 'kunitconfig' to '.kunitconfig' kunit/kunit_tool_test: Test '--build_dir' option run Documentation/dev-tools/kunit/start.rst | 13 +++++-------- tools/testing/kunit/kunit.py | 18 +++++++++++------- tools/testing/kunit/kunit_kernel.py | 10 +++++----- tools/testing/kunit/kunit_tool_test.py | 10 +++++++++- 4 files changed, 30 insertions(+), 21 deletions(-) -- 2.17.1

5 years, 6 months

3
11
0 0

[PATCH v7 0/6] Fix nits in the kunit

by sj38.park＠gmail.com

From: SeongJae Park <sjpark(a)amazon.de> This patchset contains trivial fixes for the kunit documentations and the wrapper python scripts. Baseline -------- This patchset is based on 'kselftest/fixes' branch of linux-kselftest[1]. A complete tree is available at my repo: https://github.com/sjp38/linux/tree/kunit_fix/20191205_v6 Version History --------------- Changes from v6 (https://lore.kernel.org/linux-doc/20191212022711.10062-1-sjpark@amazon.de/): - Rebased on latest kselftest/fixes - Add 'From: SeongJae Park <sjpark(a)amazon.de>' Changes from v5 (https://lore.kernel.org/linux-kselftest/20191205093440.21824-1-sjpark@amazo…): - Rebased on kselftest/fixes - Add 'Reviewed-by' and 'Tested-by' from Brendan Higgins Changes from v4 (https://lore.kernel.org/linux-doc/1575490683-13015-1-git-send-email-sj38.pa…): - Rebased on Heidi Fahim's patch[2] - Fix failing kunit_tool_test test - Add 'build_dir' option test in 'kunit_tool_test.py' Changes from v3 (https://lore.kernel.org/linux-kselftest/20191204192141.GA247851@google.com): - Fix the 4th patch, "kunit: Place 'test.log' under the 'build_dir'" to set default value of 'build_dir' as '' instead of NULL so that kunit can run even though '--build_dir' option is not given. Changes from v2 (https://lore.kernel.org/linux-kselftest/1575361141-6806-1-git-send-email-sj…): - Make 'build_dir' if not exists (missed from v3 by mistake) Changes from v1 (https://lore.kernel.org/linux-doc/1575242724-4937-1-git-send-email-sj38.par…): - Remove "docs/kunit/start: Skip wrapper run command" (A similar approach is ongoing) - Make 'build_dir' if not exists SeongJae Park (6): docs/kunit/start: Use in-tree 'kunit_defconfig' kunit: Remove duplicated defconfig creation kunit: Create default config in '--build_dir' kunit: Place 'test.log' under the 'build_dir' kunit: Rename 'kunitconfig' to '.kunitconfig' kunit/kunit_tool_test: Test '--build_dir' option run Documentation/dev-tools/kunit/start.rst | 13 +++++-------- tools/testing/kunit/kunit.py | 18 +++++++++++------- tools/testing/kunit/kunit_kernel.py | 10 +++++----- tools/testing/kunit/kunit_tool_test.py | 10 +++++++++- 4 files changed, 30 insertions(+), 21 deletions(-) -- 2.17.1

5 years, 6 months

1
6
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror