- Linux-kselftest-mirror - lists.linaro.org

[PATCH net-next, v2] selftest: Add selftest for multicast address notifications

by Yuyang Huang

This commit adds a new kernel selftest to verify RTNLGRP_IPV4_MCADDR and RTNLGRP_IPV6_MCADDR notifications. The test works by adding and removing a dummy interface and then confirming that the system correctly receives join and removal notifications for the 224.0.0.1 and ff02::1 multicast addresses. The test relies on the iproute2 version to be 6.13+. Tested by the following command: $ vng -v --user root --cpus 16 -- \ make -C tools/testing/selftests TARGETS=net TEST_PROGS=rtnetlink.sh \ TEST_GEN_PROGS="" run_tests Cc: Maciej Żenczykowski <maze(a)google.com> Cc: Lorenzo Colitti <lorenzo(a)google.com> Signed-off-by: Yuyang Huang <yuyanghuang(a)google.com> --- Changelog since v1: - Skip the test if the iproute2 is too old. tools/testing/selftests/net/rtnetlink.sh | 39 ++++++++++++++++++++++++ 1 file changed, 39 insertions(+) diff --git a/tools/testing/selftests/net/rtnetlink.sh b/tools/testing/selftests/net/rtnetlink.sh index 2e8243a65b50..74d4afb55d7c 100755 --- a/tools/testing/selftests/net/rtnetlink.sh +++ b/tools/testing/selftests/net/rtnetlink.sh @@ -21,6 +21,7 @@ ALL_TESTS=" kci_test_vrf kci_test_encap kci_test_macsec + kci_test_mcast_addr_notification kci_test_ipsec kci_test_ipsec_offload kci_test_fdb_get @@ -1334,6 +1335,44 @@ kci_test_mngtmpaddr() return $ret } +kci_test_mcast_addr_notification() +{ + local tmpfile + local monitor_pid + local match_result + + tmpfile=$(mktemp) + + ip monitor maddr > $tmpfile & + monitor_pid=$! + sleep 1 + if [ ! -e "/proc/$monitor_pid" ]; then + end_test "SKIP: mcast addr notification: iproute2 too old" + rm $tmpfile + return $ksft_skip + fi + + run_cmd ip link add name test-dummy1 type dummy + run_cmd ip link set test-dummy1 up + run_cmd ip link del dev test-dummy1 + sleep 1 + + match_result=$(grep -cE "test-dummy1.*(224.0.0.1|ff02::1)" $tmpfile) + + kill $monitor_pid + rm $tmpfile + # There should be 4 line matches as follows. + # 13: test-dummy1 inet6 mcast ff02::1 scope global + # 13: test-dummy1 inet mcast 224.0.0.1 scope global + # Deleted 13: test-dummy1 inet mcast 224.0.0.1 scope global + # Deleted 13: test-dummy1 inet6 mcast ff02::1 scope global + if [ $match_result -ne 4 ];then + end_test "FAIL: mcast addr notification" + return 1 + fi + end_test "PASS: mcast addr notification" +} + kci_test_rtnl() { local current_test -- 2.49.0.1204.g71687c7c1d-goog

5 months

2
1
0 0

[RFC PATCH v2 00/10] Add TDX intra-host migration support

by Ryan Afranji

Hello, This is RFC v2 for the TDX intra-host migration patch series. It addresses comments in RFC v1 [1] and is rebased onto the latest kvm/next (v6.16-rc1). This patchset was built on top of the latest TDX selftests [2] and gmem linking [3] RFC patch series. Here is the series stitched together for your convenience: https://github.com/googleprodkernel/linux-cc/tree/tdx-copyless-rfc-v2 Changes from RFC v1: + Added patch to prevent deadlock warnings by re-ordering locking order. + Added patch to allow vCPUs to be created for uninitialized VMs. + Minor optimizations to TDX intra-host migration core logic. + Moved lapic state transfer into TDX intra-host migration core logic. + Added logic to handle posted interrupts that are injected during migration. + Added selftests. + Addressed comments from RFC v1. + Various small changes to make patchset compatible with latest version of kvm/next. [1] https://lore.kernel.org/lkml/20230407201921.2703758-2-sagis@google.com [2] https://lore.kernel.org/lkml/20250414214801.2693294-2-sagis@google.com [3] https://lore.kernel.org/all/cover.1747368092.git.afranji@google.com Ackerley Tng (2): KVM: selftests: Add TDX support for ucalls KVM: selftests: Add irqfd/interrupts test for TDX with migration Ryan Afranji (3): KVM: x86: Adjust locking order in move_enc_context_from KVM: TDX: Allow vCPUs to be created for migration KVM: selftests: Refactor userspace_mem_region creation out of vm_mem_add Sagi Shahar (5): KVM: Split tdp_mmu_pages to mirror and direct counters KVM: TDX: Add base implementation for tdx_vm_move_enc_context_from KVM: TDX: Implement moving mirror pages between 2 TDs KVM: TDX: Add core logic for TDX intra-host migration KVM: selftests: TDX: Add tests for TDX in-place migration arch/x86/include/asm/kvm_host.h | 7 +- arch/x86/kvm/mmu.h | 2 + arch/x86/kvm/mmu/mmu.c | 66 ++++ arch/x86/kvm/mmu/tdp_mmu.c | 72 +++- arch/x86/kvm/mmu/tdp_mmu.h | 6 + arch/x86/kvm/svm/sev.c | 13 +- arch/x86/kvm/vmx/main.c | 12 +- arch/x86/kvm/vmx/tdx.c | 236 +++++++++++- arch/x86/kvm/vmx/x86_ops.h | 1 + arch/x86/kvm/x86.c | 14 +- tools/testing/selftests/kvm/Makefile.kvm | 2 + .../testing/selftests/kvm/include/kvm_util.h | 25 ++ .../selftests/kvm/include/x86/tdx/tdx_util.h | 3 + .../selftests/kvm/include/x86/tdx/test_util.h | 5 + .../testing/selftests/kvm/include/x86/ucall.h | 4 +- tools/testing/selftests/kvm/lib/kvm_util.c | 222 ++++++++---- .../testing/selftests/kvm/lib/ucall_common.c | 2 +- .../selftests/kvm/lib/x86/tdx/tdx_util.c | 63 +++- .../selftests/kvm/lib/x86/tdx/test_util.c | 17 + tools/testing/selftests/kvm/lib/x86/ucall.c | 108 ++++-- .../kvm/x86/tdx_irqfd_migrate_test.c | 264 ++++++++++++++ .../selftests/kvm/x86/tdx_migrate_tests.c | 337 ++++++++++++++++++ 22 files changed, 1349 insertions(+), 132 deletions(-) create mode 100644 tools/testing/selftests/kvm/x86/tdx_irqfd_migrate_test.c create mode 100644 tools/testing/selftests/kvm/x86/tdx_migrate_tests.c -- 2.50.0.rc1.591.g9c95f17f64-goog

5 months

1
10
0 0

[PATCH bpf-next v2 1/2] bpftool: Use appropriate permissions for map access

by Slava Imameev

Modify several functions in tools/bpf/bpftool/common.c to allow specification of requested access for file descriptors, such as read-only access. Update bpftool to request only read access for maps when write access is not required. This fixes errors when reading from maps that are protected from modification via security_bpf_map. Signed-off-by: Slava Imameev <slava.imameev(a)crowdstrike.com> --- Changes in v2: - fix for a test compilation error: "conflicting types for 'bpf_fentry_test1'" --- --- tools/bpf/bpftool/btf.c | 3 +- tools/bpf/bpftool/common.c | 57 ++++++++++++++++++++++--------- tools/bpf/bpftool/iter.c | 2 +- tools/bpf/bpftool/link.c | 2 +- tools/bpf/bpftool/main.h | 13 ++++--- tools/bpf/bpftool/map.c | 56 +++++++++++++++++------------- tools/bpf/bpftool/map_perf_ring.c | 3 +- tools/bpf/bpftool/prog.c | 4 +-- 8 files changed, 90 insertions(+), 50 deletions(-) diff --git a/tools/bpf/bpftool/btf.c b/tools/bpf/bpftool/btf.c index 6b14cbfa58aa..1ba27cb03348 100644 --- a/tools/bpf/bpftool/btf.c +++ b/tools/bpf/bpftool/btf.c @@ -905,7 +905,8 @@ static int do_dump(int argc, char **argv) return -1; } - fd = map_parse_fd_and_info(&argc, &argv, &info, &len); + fd = map_parse_fd_and_info(&argc, &argv, &info, &len, + BPF_F_RDONLY); if (fd < 0) return -1; diff --git a/tools/bpf/bpftool/common.c b/tools/bpf/bpftool/common.c index ecfa790adc13..ff1c99281beb 100644 --- a/tools/bpf/bpftool/common.c +++ b/tools/bpf/bpftool/common.c @@ -193,7 +193,8 @@ int mount_tracefs(const char *target) return err; } -int open_obj_pinned(const char *path, bool quiet) +int open_obj_pinned(const char *path, bool quiet, + const struct bpf_obj_get_opts *opts) { char *pname; int fd = -1; @@ -205,7 +206,7 @@ int open_obj_pinned(const char *path, bool quiet) goto out_ret; } - fd = bpf_obj_get(pname); + fd = bpf_obj_get_opts(pname, opts); if (fd < 0) { if (!quiet) p_err("bpf obj get (%s): %s", pname, @@ -221,12 +222,13 @@ int open_obj_pinned(const char *path, bool quiet) return fd; } -int open_obj_pinned_any(const char *path, enum bpf_obj_type exp_type) +int open_obj_pinned_any(const char *path, enum bpf_obj_type exp_type, + const struct bpf_obj_get_opts *opts) { enum bpf_obj_type type; int fd; - fd = open_obj_pinned(path, false); + fd = open_obj_pinned(path, false, opts); if (fd < 0) return -1; @@ -555,7 +557,7 @@ static int do_build_table_cb(const char *fpath, const struct stat *sb, if (typeflag != FTW_F) goto out_ret; - fd = open_obj_pinned(fpath, true); + fd = open_obj_pinned(fpath, true, NULL); if (fd < 0) goto out_ret; @@ -928,7 +930,7 @@ int prog_parse_fds(int *argc, char ***argv, int **fds) path = **argv; NEXT_ARGP(); - (*fds)[0] = open_obj_pinned_any(path, BPF_OBJ_PROG); + (*fds)[0] = open_obj_pinned_any(path, BPF_OBJ_PROG, NULL); if ((*fds)[0] < 0) return -1; return 1; @@ -965,7 +967,8 @@ int prog_parse_fd(int *argc, char ***argv) return fd; } -static int map_fd_by_name(char *name, int **fds) +static int map_fd_by_name(char *name, int **fds, + const struct bpf_get_fd_by_id_opts *opts) { unsigned int id = 0; int fd, nb_fds = 0; @@ -973,6 +976,7 @@ static int map_fd_by_name(char *name, int **fds) int err; while (true) { + LIBBPF_OPTS(bpf_get_fd_by_id_opts, opts_ro); struct bpf_map_info info = {}; __u32 len = sizeof(info); @@ -985,7 +989,9 @@ static int map_fd_by_name(char *name, int **fds) return nb_fds; } - fd = bpf_map_get_fd_by_id(id); + /* Request a read-only fd to query the map info */ + opts_ro.open_flags = BPF_F_RDONLY; + fd = bpf_map_get_fd_by_id_opts(id, &opts_ro); if (fd < 0) { p_err("can't get map by id (%u): %s", id, strerror(errno)); @@ -1004,6 +1010,15 @@ static int map_fd_by_name(char *name, int **fds) continue; } + /* Get an fd with the requested options. */ + close(fd); + fd = bpf_map_get_fd_by_id_opts(id, opts); + if (fd < 0) { + p_err("can't get map by id (%u): %s", id, + strerror(errno)); + goto err_close_fds; + } + if (nb_fds > 0) { tmp = realloc(*fds, (nb_fds + 1) * sizeof(int)); if (!tmp) { @@ -1023,8 +1038,16 @@ static int map_fd_by_name(char *name, int **fds) return -1; } -int map_parse_fds(int *argc, char ***argv, int **fds) +int map_parse_fds(int *argc, char ***argv, int **fds, __u32 open_flags) { + LIBBPF_OPTS(bpf_get_fd_by_id_opts, opts); + + if (open_flags & ~BPF_F_RDONLY) { + p_err("invalid open_flags: %x", open_flags); + return -1; + } + opts.open_flags = open_flags; + if (is_prefix(**argv, "id")) { unsigned int id; char *endptr; @@ -1038,7 +1061,7 @@ int map_parse_fds(int *argc, char ***argv, int **fds) } NEXT_ARGP(); - (*fds)[0] = bpf_map_get_fd_by_id(id); + (*fds)[0] = bpf_map_get_fd_by_id_opts(id, &opts); if ((*fds)[0] < 0) { p_err("get map by id (%u): %s", id, strerror(errno)); return -1; @@ -1056,16 +1079,18 @@ int map_parse_fds(int *argc, char ***argv, int **fds) } NEXT_ARGP(); - return map_fd_by_name(name, fds); + return map_fd_by_name(name, fds, &opts); } else if (is_prefix(**argv, "pinned")) { char *path; + LIBBPF_OPTS(bpf_obj_get_opts, get_opts); + get_opts.file_flags = open_flags; NEXT_ARGP(); path = **argv; NEXT_ARGP(); - (*fds)[0] = open_obj_pinned_any(path, BPF_OBJ_MAP); + (*fds)[0] = open_obj_pinned_any(path, BPF_OBJ_MAP, &get_opts); if ((*fds)[0] < 0) return -1; return 1; @@ -1075,7 +1100,7 @@ int map_parse_fds(int *argc, char ***argv, int **fds) return -1; } -int map_parse_fd(int *argc, char ***argv) +int map_parse_fd(int *argc, char ***argv, __u32 open_flags) { int *fds = NULL; int nb_fds, fd; @@ -1085,7 +1110,7 @@ int map_parse_fd(int *argc, char ***argv) p_err("mem alloc failed"); return -1; } - nb_fds = map_parse_fds(argc, argv, &fds); + nb_fds = map_parse_fds(argc, argv, &fds, open_flags); if (nb_fds != 1) { if (nb_fds > 1) { p_err("several maps match this handle"); @@ -1103,12 +1128,12 @@ int map_parse_fd(int *argc, char ***argv) } int map_parse_fd_and_info(int *argc, char ***argv, struct bpf_map_info *info, - __u32 *info_len) + __u32 *info_len, __u32 open_flags) { int err; int fd; - fd = map_parse_fd(argc, argv); + fd = map_parse_fd(argc, argv, open_flags); if (fd < 0) return -1; diff --git a/tools/bpf/bpftool/iter.c b/tools/bpf/bpftool/iter.c index 5c39c2ed36a2..ad318a8667a4 100644 --- a/tools/bpf/bpftool/iter.c +++ b/tools/bpf/bpftool/iter.c @@ -37,7 +37,7 @@ static int do_pin(int argc, char **argv) return -1; } - map_fd = map_parse_fd(&argc, &argv); + map_fd = map_parse_fd(&argc, &argv, 0); if (map_fd < 0) return -1; diff --git a/tools/bpf/bpftool/link.c b/tools/bpf/bpftool/link.c index 3535afc80a49..8523be11dcd9 100644 --- a/tools/bpf/bpftool/link.c +++ b/tools/bpf/bpftool/link.c @@ -117,7 +117,7 @@ static int link_parse_fd(int *argc, char ***argv) path = **argv; NEXT_ARGP(); - return open_obj_pinned_any(path, BPF_OBJ_LINK); + return open_obj_pinned_any(path, BPF_OBJ_LINK, NULL); } p_err("expected 'id' or 'pinned', got: '%s'?", **argv); diff --git a/tools/bpf/bpftool/main.h b/tools/bpf/bpftool/main.h index 9eb764fe4cc8..6db704fda5c0 100644 --- a/tools/bpf/bpftool/main.h +++ b/tools/bpf/bpftool/main.h @@ -15,6 +15,7 @@ #include <bpf/hashmap.h> #include <bpf/libbpf.h> +#include <bpf/bpf.h> #include "json_writer.h" @@ -140,8 +141,10 @@ void get_prog_full_name(const struct bpf_prog_info *prog_info, int prog_fd, int get_fd_type(int fd); const char *get_fd_type_name(enum bpf_obj_type type); char *get_fdinfo(int fd, const char *key); -int open_obj_pinned(const char *path, bool quiet); -int open_obj_pinned_any(const char *path, enum bpf_obj_type exp_type); +int open_obj_pinned(const char *path, bool quiet, + const struct bpf_obj_get_opts *opts); +int open_obj_pinned_any(const char *path, enum bpf_obj_type exp_type, + const struct bpf_obj_get_opts *opts); int mount_bpffs_for_file(const char *file_name); int create_and_mount_bpffs_dir(const char *dir_name); int do_pin_any(int argc, char **argv, int (*get_fd_by_id)(int *, char ***)); @@ -167,10 +170,10 @@ int do_iter(int argc, char **argv) __weak; int parse_u32_arg(int *argc, char ***argv, __u32 *val, const char *what); int prog_parse_fd(int *argc, char ***argv); int prog_parse_fds(int *argc, char ***argv, int **fds); -int map_parse_fd(int *argc, char ***argv); -int map_parse_fds(int *argc, char ***argv, int **fds); +int map_parse_fd(int *argc, char ***argv, __u32 open_flags); +int map_parse_fds(int *argc, char ***argv, int **fds, __u32 open_flags); int map_parse_fd_and_info(int *argc, char ***argv, struct bpf_map_info *info, - __u32 *info_len); + __u32 *info_len, __u32 open_flags); struct bpf_prog_linfo; #if defined(HAVE_LLVM_SUPPORT) || defined(HAVE_LIBBFD_SUPPORT) diff --git a/tools/bpf/bpftool/map.c b/tools/bpf/bpftool/map.c index 81cc668b4b05..c7dc2eae8ba8 100644 --- a/tools/bpf/bpftool/map.c +++ b/tools/bpf/bpftool/map.c @@ -337,9 +337,9 @@ static void fill_per_cpu_value(struct bpf_map_info *info, void *value) memcpy(value + i * step, value, info->value_size); } -static int parse_elem(char **argv, struct bpf_map_info *info, - void *key, void *value, __u32 key_size, __u32 value_size, - __u32 *flags, __u32 **value_fd) +static int parse_elem(char **argv, struct bpf_map_info *info, void *key, + void *value, __u32 key_size, __u32 value_size, + __u32 *flags, __u32 **value_fd, __u32 open_flags) { if (!*argv) { if (!key && !value) @@ -362,7 +362,7 @@ static int parse_elem(char **argv, struct bpf_map_info *info, return -1; return parse_elem(argv, info, NULL, value, key_size, value_size, - flags, value_fd); + flags, value_fd, open_flags); } else if (is_prefix(*argv, "value")) { int fd; @@ -388,7 +388,7 @@ static int parse_elem(char **argv, struct bpf_map_info *info, return -1; } - fd = map_parse_fd(&argc, &argv); + fd = map_parse_fd(&argc, &argv, open_flags); if (fd < 0) return -1; @@ -424,7 +424,7 @@ static int parse_elem(char **argv, struct bpf_map_info *info, } return parse_elem(argv, info, key, NULL, key_size, value_size, - flags, NULL); + flags, NULL, open_flags); } else if (is_prefix(*argv, "any") || is_prefix(*argv, "noexist") || is_prefix(*argv, "exist")) { if (!flags) { @@ -440,7 +440,7 @@ static int parse_elem(char **argv, struct bpf_map_info *info, *flags = BPF_EXIST; return parse_elem(argv + 1, info, key, value, key_size, - value_size, NULL, value_fd); + value_size, NULL, value_fd, open_flags); } p_err("expected key or value, got: %s", *argv); @@ -639,7 +639,7 @@ static int do_show_subset(int argc, char **argv) p_err("mem alloc failed"); return -1; } - nb_fds = map_parse_fds(&argc, &argv, &fds); + nb_fds = map_parse_fds(&argc, &argv, &fds, BPF_F_RDONLY); if (nb_fds < 1) goto exit_free; @@ -672,12 +672,15 @@ static int do_show_subset(int argc, char **argv) static int do_show(int argc, char **argv) { + LIBBPF_OPTS(bpf_get_fd_by_id_opts, opts); struct bpf_map_info info = {}; __u32 len = sizeof(info); __u32 id = 0; int err; int fd; + opts.open_flags = BPF_F_RDONLY; + if (show_pinned) { map_table = hashmap__new(hash_fn_for_key_as_id, equal_fn_for_key_as_id, NULL); @@ -707,7 +710,7 @@ static int do_show(int argc, char **argv) break; } - fd = bpf_map_get_fd_by_id(id); + fd = bpf_map_get_fd_by_id_opts(id, &opts); if (fd < 0) { if (errno == ENOENT) continue; @@ -909,7 +912,7 @@ static int do_dump(int argc, char **argv) p_err("mem alloc failed"); return -1; } - nb_fds = map_parse_fds(&argc, &argv, &fds); + nb_fds = map_parse_fds(&argc, &argv, &fds, BPF_F_RDONLY); if (nb_fds < 1) goto exit_free; @@ -997,7 +1000,7 @@ static int do_update(int argc, char **argv) if (argc < 2) usage(); - fd = map_parse_fd_and_info(&argc, &argv, &info, &len); + fd = map_parse_fd_and_info(&argc, &argv, &info, &len, 0); if (fd < 0) return -1; @@ -1006,7 +1009,7 @@ static int do_update(int argc, char **argv) goto exit_free; err = parse_elem(argv, &info, key, value, info.key_size, - info.value_size, &flags, &value_fd); + info.value_size, &flags, &value_fd, 0); if (err) goto exit_free; @@ -1076,7 +1079,7 @@ static int do_lookup(int argc, char **argv) if (argc < 2) usage(); - fd = map_parse_fd_and_info(&argc, &argv, &info, &len); + fd = map_parse_fd_and_info(&argc, &argv, &info, &len, BPF_F_RDONLY); if (fd < 0) return -1; @@ -1084,7 +1087,8 @@ static int do_lookup(int argc, char **argv) if (err) goto exit_free; - err = parse_elem(argv, &info, key, NULL, info.key_size, 0, NULL, NULL); + err = parse_elem(argv, &info, key, NULL, info.key_size, 0, NULL, NULL, + BPF_F_RDONLY); if (err) goto exit_free; @@ -1127,7 +1131,7 @@ static int do_getnext(int argc, char **argv) if (argc < 2) usage(); - fd = map_parse_fd_and_info(&argc, &argv, &info, &len); + fd = map_parse_fd_and_info(&argc, &argv, &info, &len, BPF_F_RDONLY); if (fd < 0) return -1; @@ -1140,8 +1144,8 @@ static int do_getnext(int argc, char **argv) } if (argc) { - err = parse_elem(argv, &info, key, NULL, info.key_size, 0, - NULL, NULL); + err = parse_elem(argv, &info, key, NULL, info.key_size, 0, NULL, + NULL, BPF_F_RDONLY); if (err) goto exit_free; } else { @@ -1198,7 +1202,7 @@ static int do_delete(int argc, char **argv) if (argc < 2) usage(); - fd = map_parse_fd_and_info(&argc, &argv, &info, &len); + fd = map_parse_fd_and_info(&argc, &argv, &info, &len, BPF_F_RDONLY); if (fd < 0) return -1; @@ -1209,7 +1213,8 @@ static int do_delete(int argc, char **argv) goto exit_free; } - err = parse_elem(argv, &info, key, NULL, info.key_size, 0, NULL, NULL); + err = parse_elem(argv, &info, key, NULL, info.key_size, 0, NULL, NULL, + 0); if (err) goto exit_free; @@ -1226,11 +1231,16 @@ static int do_delete(int argc, char **argv) return err; } +static int map_parse_read_only_fd(int *argc, char ***argv) +{ + return map_parse_fd(argc, argv, BPF_F_RDONLY); +} + static int do_pin(int argc, char **argv) { int err; - err = do_pin_any(argc, argv, map_parse_fd); + err = do_pin_any(argc, argv, map_parse_read_only_fd); if (!err && json_output) jsonw_null(json_wtr); return err; @@ -1319,7 +1329,7 @@ static int do_create(int argc, char **argv) if (!REQ_ARGS(2)) usage(); inner_map_fd = map_parse_fd_and_info(&argc, &argv, - &info, &len); + &info, &len, 0); if (inner_map_fd < 0) return -1; attr.inner_map_fd = inner_map_fd; @@ -1368,7 +1378,7 @@ static int do_pop_dequeue(int argc, char **argv) if (argc < 2) usage(); - fd = map_parse_fd_and_info(&argc, &argv, &info, &len); + fd = map_parse_fd_and_info(&argc, &argv, &info, &len, 0); if (fd < 0) return -1; @@ -1407,7 +1417,7 @@ static int do_freeze(int argc, char **argv) if (!REQ_ARGS(2)) return -1; - fd = map_parse_fd(&argc, &argv); + fd = map_parse_fd(&argc, &argv, 0); if (fd < 0) return -1; diff --git a/tools/bpf/bpftool/map_perf_ring.c b/tools/bpf/bpftool/map_perf_ring.c index 552b4ca40c27..bcb767e2d673 100644 --- a/tools/bpf/bpftool/map_perf_ring.c +++ b/tools/bpf/bpftool/map_perf_ring.c @@ -128,7 +128,8 @@ int do_event_pipe(int argc, char **argv) int err, map_fd; map_info_len = sizeof(map_info); - map_fd = map_parse_fd_and_info(&argc, &argv, &map_info, &map_info_len); + map_fd = map_parse_fd_and_info(&argc, &argv, &map_info, &map_info_len, + 0); if (map_fd < 0) return -1; diff --git a/tools/bpf/bpftool/prog.c b/tools/bpf/bpftool/prog.c index 96eea8a67225..deeaa5c1ed7d 100644 --- a/tools/bpf/bpftool/prog.c +++ b/tools/bpf/bpftool/prog.c @@ -1062,7 +1062,7 @@ static int parse_attach_detach_args(int argc, char **argv, int *progfd, if (!REQ_ARGS(2)) return -EINVAL; - *mapfd = map_parse_fd(&argc, &argv); + *mapfd = map_parse_fd(&argc, &argv, 0); if (*mapfd < 0) return *mapfd; @@ -1608,7 +1608,7 @@ static int load_with_options(int argc, char **argv, bool first_prog_only) } NEXT_ARG(); - fd = map_parse_fd(&argc, &argv); + fd = map_parse_fd(&argc, &argv, 0); if (fd < 0) goto err_free_reuse_maps; -- 2.34.1

5 months

2
5
0 0

Re: [PATCH bpf-next v2 1/2] bpftool: Use appropriate permissions for map access

by Slava Imameev

> > Modify several functions in tools/bpf/bpftool/common.c to allow > > specification of requested access for file descriptors, such as > > read-only access. > > > > Update bpftool to request only read access for maps when write > > access is not required. This fixes errors when reading from maps > > that are protected from modification via security_bpf_map. > > > > Signed-off-by: Slava Imameev <slava.imameev(a)crowdstrike.com> > > > Thanks for this! > > I think the topic of map access in bpftool has been discussed in the > path, but I can't remember what we said or find it again - maybe I don't > remember correctly. Looks good to me overall. > > One question: How thoroughly have you tested that write permissions are > necessary for the different cases? I'm asking because I'm wondering > whether we could restrict to read-only in a couple more cases, see > below. (At the end of the day it doesn't matter too much, it's fine > being conservative and conserving write permissions for now, we can > always refine later; it's already an improvement to do read-only for the > dump/list cases). The goal of this patch was to fix bpftool errors we experienced on our systems. The efforts were focused only on changes to the affected subset of map commands. > > + /* Get an fd with the requested options. */ > > + close(fd); > > + fd = bpf_map_get_fd_by_id_opts(id, opts); > > + if (fd < 0) { > > + p_err("can't get map by id (%u): %s", id, > > + strerror(errno)); > > + goto err_close_fds; > > + } > > > We could maybe skip this step if the requested options are read-only, no > need to close and re-open a fd in that case? I agree. The change will be submitted with version 3. > > -int map_parse_fds(int *argc, char ***argv, int **fds) > > +int map_parse_fds(int *argc, char ***argv, int **fds, __u32 open_flags) > > { > > + LIBBPF_OPTS(bpf_get_fd_by_id_opts, opts); > > + > > + if (open_flags & ~BPF_F_RDONLY) { > > + p_err("invalid open_flags: %x", open_flags); > > + return -1; > > + } > > > I don't think we need this check, the flag is never passed by users. If > you want to catch a bug, use an assert() instead? I agree. This check is replaced with an assert and will be submitted with v3. > > diff --git a/tools/bpf/bpftool/iter.c b/tools/bpf/bpftool/iter.c > > index 5c39c2ed36a2..ad318a8667a4 100644 > > --- a/tools/bpf/bpftool/iter.c > > +++ b/tools/bpf/bpftool/iter.c > > @@ -37,7 +37,7 @@ static int do_pin(int argc, char **argv) > > return -1; > > } > > > > - map_fd = map_parse_fd(&argc, &argv); > > + map_fd = map_parse_fd(&argc, &argv, 0); > > > Do you need write permissions here? (I don't remember.) Iterator requires only read access. I changed it to BPF_F_RDONLY for v3. An iterator test is added to v3. > > - fd = map_parse_fd_and_info(&argc, &argv, &info, &len); > > + fd = map_parse_fd_and_info(&argc, &argv, &info, &len, BPF_F_RDONLY); > > > This one is surprising, don't you need write permissions to delete an > element from the map? Please double-check if you haven't already, I > wouldn't want to break "bpftool map delete". > > I note you don't test items deletion in your tests, by the way. Right, the delete command requires write access. I changed it and added an item deletion test to v3. > > static int do_pin(int argc, char **argv) > > { > > int err; > > > > - err = do_pin_any(argc, argv, map_parse_fd); > > + err = do_pin_any(argc, argv, map_parse_read_only_fd); > > if (!err && json_output) > > jsonw_null(json_wtr); > > return err; > > @@ -1319,7 +1329,7 @@ static int do_create(int argc, char **argv) > > if (!REQ_ARGS(2)) > > usage(); > > inner_map_fd = map_parse_fd_and_info(&argc, &argv, > > - &info, &len); > > + &info, &len, 0); > > > Do you need write permissions for the inner map's fd? This is something > that could be worth checking in the tests, as well. The inner map fd can be created with read only access. I changed it and added a test for map-of-maps creation to v3. > > @@ -128,7 +128,8 @@ int do_event_pipe(int argc, char **argv) > > int err, map_fd; > > > > map_info_len = sizeof(map_info); > > - map_fd = map_parse_fd_and_info(&argc, &argv, &map_info, &map_info_len); > > + map_fd = map_parse_fd_and_info(&argc, &argv, &map_info, &map_info_len, > > + 0); > > > This one might be worth checking, too. An event pipe map fd requires write access as the map is updated by bpf_map_update_elem inside __perf_buffer__new .

5 months

1
0
0 0

[PATCH net-next v10] selftests/vsock: add initial vmtest.sh for vsock

by Bobby Eshleman

This commit introduces a new vmtest.sh runner for vsock. It uses virtme-ng/qemu to run tests in a VM. The tests validate G2H, H2G, and loopback. The testing tools from tools/testing/vsock/ are reused. Currently, only vsock_test is used. VMCI and hyperv support is included in the config file to be built with the -b option, though not used in the tests. Only tested on x86. To run: $ make -C tools/testing/selftests TARGETS=vsock $ tools/testing/selftests/vsock/vmtest.sh or $ make -C tools/testing/selftests TARGETS=vsock run_tests Example runs (after make -C tools/testing/selftests TARGETS=vsock): $ ./tools/testing/selftests/vsock/vmtest.sh 1..3 ok 0 vm_server_host_client ok 1 vm_client_host_server ok 2 vm_loopback SUMMARY: PASS=3 SKIP=0 FAIL=0 Log: /tmp/vsock_vmtest_m7DI.log $ ./tools/testing/selftests/vsock/vmtest.sh vm_loopback 1..1 ok 0 vm_loopback SUMMARY: PASS=1 SKIP=0 FAIL=0 Log: /tmp/vsock_vmtest_a1IO.log $ mkdir -p ~/scratch $ make -C tools/testing/selftests install TARGETS=vsock INSTALL_PATH=~/scratch [... omitted ...] $ cd ~/scratch $ ./run_kselftest.sh TAP version 13 1..1 # timeout set to 300 # selftests: vsock: vmtest.sh # 1..3 # ok 0 vm_server_host_client # ok 1 vm_client_host_server # ok 2 vm_loopback # SUMMARY: PASS=3 SKIP=0 FAIL=0 # Log: /tmp/vsock_vmtest_svEl.log ok 1 selftests: vsock: vmtest.sh Future work can include vsock_diag_test. Because vsock requires a VM to test anything other than loopback, this patch adds vmtest.sh as a kselftest itself. This is different than other systems that have a "vmtest.sh", where it is used as a utility script to spin up a VM to run the selftests as a guest (but isn't hooked into kselftest). Signed-off-by: Bobby Eshleman <bobbyeshleman(a)gmail.com> --- Changes in v10: - remove dupes in tools/testing/selftests/vsock/config - Link to v9: https://lore.kernel.org/r/20250527-vsock-vmtest-v9-1-24eaeec6fa55@gmail.com Changes in v9: - make kselftest build target depend on tools/testing/vsock sources (Stefano) - add check_vng() for vng version checking (Stefano) - add virtme_ssh_channel=tcp to kernel cmdline (Stefano) - Link to v8: https://lore.kernel.org/r/20250522-vsock-vmtest-v8-1-367619bef134@gmail.com Changes in v8: - remove NIPA comment from commit msg - remove tap_* functions and TAP_PREFIX - add -b for building kernel - Link to v7: https://lore.kernel.org/r/20250515-vsock-vmtest-v7-1-ba6fa86d6c2c@gmail.com Changes in v7: - fix exit code bug when ran is kselftest: use cnt_total instead of KSFT_NUM_TESTS - updated commit message with updated output - updated commit message with commands for installing/running as kselftest - Link to v6: https://lore.kernel.org/r/20250515-vsock-vmtest-v6-1-9af1cc023900@gmail.com Changes in v6: - add make cmd in commit message in vmtest.sh example (Stefano) - check nonzero size of QEMU_PIDFILE using -s conditional (Stefano) - display log file path after tests so it is easier to find amongst other random names - cleanup qemu pidfile if qemu is unable to remove it - make oops/warning failures more obvious with 'FAIL' prefix in log (simply saying 'detected' wasn't clear enough to identify failing condition) - Link to v5: https://lore.kernel.org/r/20250513-vsock-vmtest-v5-1-4e75c4a45ceb@gmail.com Changes in v5: - make log file a tmpfile (Paolo) - make sure both default and user defined QEMU gets handled by the dependency check (Paolo) - increased VM boot up timeout from 1m to 3m for slow hosts (Paolo) - rename vm_setup -> vm_start (Paolo) - derive wait_for_listener from selftests/net/net_helper.sh to removes ss usage - Remove unused 'unset IFS' line (Paolo) - leave space after variable declarations (Paolo) - make QEMU_PIDFILE a tmp file (Paolo) - make everything readonly that is only read (Paolo) - source ktap_helpers.sh for KSFT_PASS and friends (Paolo) - don't check for timeout util (Paolo) - add missing usage string for -q qemu arg - add tap prefix to SUMMARY line since it isn't part of TAP protocol - exit with the correct status code based on failure/pass counts - Link to v4: https://lore.kernel.org/r/20250507-vsock-vmtest-v4-1-6e2a97262cd6@gmail.com Changes in v4: - do not use special tab delimiter for help string parsing (Stefano + Paolo) - fix paths for when installing kselftest and running out-of-tree (Paolo) - change vng to using running kernel instead of compiled kernel (Paolo) - use multi-line string for QEMU_OPTS (Stefano) - change timeout to 300s (Paolo) - skip if tools are not found and use kselftests status codes (Paolo) - remove build from vmtest.sh (Paolo) - change 2222 -> SSH_HOST_PORT (Stefano) - add tap-format output - add vmtest.log to gitignore - check for vsock_test binary and remind user to build it if missing - create a proper build in makefile - style fixes - add ssh, timeout, and pkill to dependency check, just in case - fix numerical comparison in conditionals - check qemu pidfile exists before proceeding (avoid wasting time waiting for ssh) - fix tracking of pass/fail bug - fix stderr redirection bug - Link to v3: https://lore.kernel.org/r/20250428-vsock-vmtest-v3-1-181af6163f3e@gmail.com Changes in v3: - use common conditional syntax for checking variables - use return value instead of global rc - fix typo TEST_HOST_LISTENER_PORT -> TEST_HOST_PORT_LISTENER - use SIGTERM instead of SIGKILL on cleanup - use peer-cid=1 for loopback - change sleep delay times into globals - fix test_vm_loopback logging - add test selection in arguments - make QEMU an argument - check that vng binary is on path - use QEMU variable - change <tab><backslash> to <space><backslash> - fix hardcoded file paths - add comment in commit msg about script that vmtest.sh was based off of - Add tools/testing/selftest/vsock/Makefile for kselftest - Link to v2: https://lore.kernel.org/r/20250417-vsock-vmtest-v2-1-3901a27331e8@gmail.com Changes in v2: - add kernel oops and warnings checker - change testname variable to use FUNCNAME - fix spacing in test_vm_server_host_client - add -s skip build option to vmtest.sh - add test_vm_loopback - pass port to vm_wait_for_listener - fix indentation in vmtest.sh - add vmci and hyperv to config - changed whitespace from tabs to spaces in help string - Link to v1: https://lore.kernel.org/r/20250410-vsock-vmtest-v1-1-f35a81dab98c@gmail.com --- MAINTAINERS | 1 + tools/testing/selftests/vsock/.gitignore | 2 + tools/testing/selftests/vsock/Makefile | 17 ++ tools/testing/selftests/vsock/config | 111 +++++++ tools/testing/selftests/vsock/settings | 1 + tools/testing/selftests/vsock/vmtest.sh | 487 +++++++++++++++++++++++++++++++ 6 files changed, 619 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 657a67f9031ef7798c19ac63e6383d4cb18a9e1f..3fbdd7bbfce7196a3cc7db70203317c6bd0e51fd 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -25751,6 +25751,7 @@ F: include/uapi/linux/vm_sockets.h F: include/uapi/linux/vm_sockets_diag.h F: include/uapi/linux/vsockmon.h F: net/vmw_vsock/ +F: tools/testing/selftests/vsock/ F: tools/testing/vsock/ VMALLOC diff --git a/tools/testing/selftests/vsock/.gitignore b/tools/testing/selftests/vsock/.gitignore new file mode 100644 index 0000000000000000000000000000000000000000..9c5bf379480f829a14713d5f5dc7d525bc272e84 --- /dev/null +++ b/tools/testing/selftests/vsock/.gitignore @@ -0,0 +1,2 @@ +vmtest.log +vsock_test diff --git a/tools/testing/selftests/vsock/Makefile b/tools/testing/selftests/vsock/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..c407c0afd9388ee692d59a95f304182f067596e9 --- /dev/null +++ b/tools/testing/selftests/vsock/Makefile @@ -0,0 +1,17 @@ +# SPDX-License-Identifier: GPL-2.0 + +CURDIR := $(abspath .) +TOOLSDIR := $(abspath ../../..) +VSOCK_TEST_DIR := $(TOOLSDIR)/testing/vsock +VSOCK_TEST_SRCS := $(wildcard $(VSOCK_TEST_DIR)/*.c $(VSOCK_TEST_DIR)/*.h) + +$(OUTPUT)/vsock_test: $(VSOCK_TEST_DIR)/vsock_test + install -m 755 $< $@ + +$(VSOCK_TEST_DIR)/vsock_test: $(VSOCK_TEST_SRCS) + $(MAKE) -C $(VSOCK_TEST_DIR) vsock_test +TEST_PROGS += vmtest.sh +TEST_GEN_FILES := vsock_test + +include ../lib.mk + diff --git a/tools/testing/selftests/vsock/config b/tools/testing/selftests/vsock/config new file mode 100644 index 0000000000000000000000000000000000000000..5f0a4f17dfc96c0f4b8decafb01724648495191a --- /dev/null +++ b/tools/testing/selftests/vsock/config @@ -0,0 +1,111 @@ +CONFIG_BLK_DEV_INITRD=y +CONFIG_BPF=y +CONFIG_BPF_SYSCALL=y +CONFIG_BPF_JIT=y +CONFIG_HAVE_EBPF_JIT=y +CONFIG_BPF_EVENTS=y +CONFIG_FTRACE_SYSCALLS=y +CONFIG_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_DYNAMIC_FTRACE=y +CONFIG_HAVE_KPROBES=y +CONFIG_KPROBES=y +CONFIG_KPROBE_EVENTS=y +CONFIG_ARCH_SUPPORTS_UPROBES=y +CONFIG_UPROBES=y +CONFIG_UPROBE_EVENTS=y +CONFIG_DEBUG_FS=y +CONFIG_FW_CFG_SYSFS=y +CONFIG_FW_CFG_SYSFS_CMDLINE=y +CONFIG_DRM=y +CONFIG_DRM_VIRTIO_GPU=y +CONFIG_DRM_VIRTIO_GPU_KMS=y +CONFIG_DRM_BOCHS=y +CONFIG_VIRTIO_IOMMU=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_SEQUENCER=y +CONFIG_SND_PCI=y +CONFIG_SND_INTEL8X0=y +CONFIG_SND_HDA_CODEC_REALTEK=y +CONFIG_SECURITYFS=y +CONFIG_CGROUP_BPF=y +CONFIG_SQUASHFS=y +CONFIG_SQUASHFS_XZ=y +CONFIG_SQUASHFS_ZSTD=y +CONFIG_FUSE_FS=y +CONFIG_VIRTIO_FS=y +CONFIG_SERIO=y +CONFIG_PCI=y +CONFIG_INPUT=y +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_X86_VERBOSE_BOOTUP=y +CONFIG_VGA_CONSOLE=y +CONFIG_FB=y +CONFIG_FB_VESA=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_DRV_CMOS=y +CONFIG_HYPERVISOR_GUEST=y +CONFIG_PARAVIRT=y +CONFIG_KVM_GUEST=y +CONFIG_KVM=y +CONFIG_KVM_INTEL=y +CONFIG_KVM_AMD=y +CONFIG_VSOCKETS=y +CONFIG_VSOCKETS_DIAG=y +CONFIG_VSOCKETS_LOOPBACK=y +CONFIG_VMWARE_VMCI_VSOCKETS=y +CONFIG_VIRTIO_VSOCKETS=y +CONFIG_VIRTIO_VSOCKETS_COMMON=y +CONFIG_HYPERV_VSOCKETS=y +CONFIG_VMWARE_VMCI=y +CONFIG_VHOST_VSOCK=y +CONFIG_HYPERV=y +CONFIG_UEVENT_HELPER=n +CONFIG_VIRTIO=y +CONFIG_VIRTIO_PCI=y +CONFIG_VIRTIO_MMIO=y +CONFIG_VIRTIO_BALLOON=y +CONFIG_NET=y +CONFIG_NET_CORE=y +CONFIG_NETDEVICES=y +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_INET=y +CONFIG_NET_9P=y +CONFIG_NET_9P_VIRTIO=y +CONFIG_9P_FS=y +CONFIG_VIRTIO_NET=y +CONFIG_CMDLINE_OVERRIDE=n +CONFIG_BINFMT_SCRIPT=y +CONFIG_SHMEM=y +CONFIG_TMPFS=y +CONFIG_UNIX=y +CONFIG_MODULE_SIG_FORCE=n +CONFIG_DEVTMPFS=y +CONFIG_TTY=y +CONFIG_VT=y +CONFIG_UNIX98_PTYS=y +CONFIG_EARLY_PRINTK=y +CONFIG_INOTIFY_USER=y +CONFIG_BLOCK=y +CONFIG_SCSI_LOWLEVEL=y +CONFIG_SCSI=y +CONFIG_SCSI_VIRTIO=y +CONFIG_BLK_DEV_SD=y +CONFIG_VIRTIO_CONSOLE=y +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_CORE=y +CONFIG_I6300ESB_WDT=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y +CONFIG_OVERLAY_FS=y +CONFIG_DAX=y +CONFIG_DAX_DRIVER=y +CONFIG_FS_DAX=y +CONFIG_MEMORY_HOTPLUG=y +CONFIG_MEMORY_HOTREMOVE=y +CONFIG_ZONE_DEVICE=y diff --git a/tools/testing/selftests/vsock/settings b/tools/testing/selftests/vsock/settings new file mode 100644 index 0000000000000000000000000000000000000000..694d70710ff08ac9fc91e9ecb5dbdadcf051f019 --- /dev/null +++ b/tools/testing/selftests/vsock/settings @@ -0,0 +1 @@ +timeout=300 diff --git a/tools/testing/selftests/vsock/vmtest.sh b/tools/testing/selftests/vsock/vmtest.sh new file mode 100755 index 0000000000000000000000000000000000000000..edacebfc163251eee9cd495eb5e704dc7adc958e --- /dev/null +++ b/tools/testing/selftests/vsock/vmtest.sh @@ -0,0 +1,487 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Copyright (c) 2025 Meta Platforms, Inc. and affiliates +# +# Dependencies: +# * virtme-ng +# * busybox-static (used by virtme-ng) +# * qemu (used by virtme-ng) + +readonly SCRIPT_DIR="$(cd -P -- "$(dirname -- "${BASH_SOURCE[0]}")" && pwd -P)" +readonly KERNEL_CHECKOUT=$(realpath "${SCRIPT_DIR}"/../../../../) + +source "${SCRIPT_DIR}"/../kselftest/ktap_helpers.sh + +readonly VSOCK_TEST="${SCRIPT_DIR}"/vsock_test +readonly TEST_GUEST_PORT=51000 +readonly TEST_HOST_PORT=50000 +readonly TEST_HOST_PORT_LISTENER=50001 +readonly SSH_GUEST_PORT=22 +readonly SSH_HOST_PORT=2222 +readonly VSOCK_CID=1234 +readonly WAIT_PERIOD=3 +readonly WAIT_PERIOD_MAX=60 +readonly WAIT_TOTAL=$(( WAIT_PERIOD * WAIT_PERIOD_MAX )) +readonly QEMU_PIDFILE=$(mktemp /tmp/qemu_vsock_vmtest_XXXX.pid) + +# virtme-ng offers a netdev for ssh when using "--ssh", but we also need a +# control port forwarded for vsock_test. Because virtme-ng doesn't support +# adding an additional port to forward to the device created from "--ssh" and +# virtme-init mistakenly sets identical IPs to the ssh device and additional +# devices, we instead opt out of using --ssh, add the device manually, and also +# add the kernel cmdline options that virtme-init uses to setup the interface. +readonly QEMU_TEST_PORT_FWD="hostfwd=tcp::${TEST_HOST_PORT}-:${TEST_GUEST_PORT}" +readonly QEMU_SSH_PORT_FWD="hostfwd=tcp::${SSH_HOST_PORT}-:${SSH_GUEST_PORT}" +readonly QEMU_OPTS="\ + -netdev user,id=n0,${QEMU_TEST_PORT_FWD},${QEMU_SSH_PORT_FWD} \ + -device virtio-net-pci,netdev=n0 \ + -device vhost-vsock-pci,guest-cid=${VSOCK_CID} \ + --pidfile ${QEMU_PIDFILE} \ +" +readonly KERNEL_CMDLINE="\ + virtme.dhcp net.ifnames=0 biosdevname=0 \ + virtme.ssh virtme_ssh_channel=tcp virtme_ssh_user=$USER \ +" +readonly LOG=$(mktemp /tmp/vsock_vmtest_XXXX.log) +readonly TEST_NAMES=(vm_server_host_client vm_client_host_server vm_loopback) +readonly TEST_DESCS=( + "Run vsock_test in server mode on the VM and in client mode on the host." + "Run vsock_test in client mode on the VM and in server mode on the host." + "Run vsock_test using the loopback transport in the VM." +) + +VERBOSE=0 + +usage() { + local name + local desc + local i + + echo + echo "$0 [OPTIONS] [TEST]..." + echo "If no TEST argument is given, all tests will be run." + echo + echo "Options" + echo " -b: build the kernel from the current source tree and use it for guest VMs" + echo " -q: set the path to or name of qemu binary" + echo " -v: verbose output" + echo + echo "Available tests" + + for ((i = 0; i < ${#TEST_NAMES[@]}; i++)); do + name=${TEST_NAMES[${i}]} + desc=${TEST_DESCS[${i}]} + printf "\t%-35s%-35s\n" "${name}" "${desc}" + done + echo + + exit 1 +} + +die() { + echo "$*" >&2 + exit "${KSFT_FAIL}" +} + +vm_ssh() { + ssh -q -o UserKnownHostsFile=/dev/null -p ${SSH_HOST_PORT} localhost "$@" + return $? +} + +cleanup() { + if [[ -s "${QEMU_PIDFILE}" ]]; then + pkill -SIGTERM -F "${QEMU_PIDFILE}" > /dev/null 2>&1 + fi + + # If failure occurred during or before qemu start up, then we need + # to clean this up ourselves. + if [[ -e "${QEMU_PIDFILE}" ]]; then + rm "${QEMU_PIDFILE}" + fi +} + +check_args() { + local found + + for arg in "$@"; do + found=0 + for name in "${TEST_NAMES[@]}"; do + if [[ "${name}" = "${arg}" ]]; then + found=1 + break + fi + done + + if [[ "${found}" -eq 0 ]]; then + echo "${arg} is not an available test" >&2 + usage + fi + done + + for arg in "$@"; do + if ! command -v > /dev/null "test_${arg}"; then + echo "Test ${arg} not found" >&2 + usage + fi + done +} + +check_deps() { + for dep in vng ${QEMU} busybox pkill ssh; do + if [[ ! -x $(command -v "${dep}") ]]; then + echo -e "skip: dependency ${dep} not found!\n" + exit "${KSFT_SKIP}" + fi + done + + if [[ ! -x $(command -v "${VSOCK_TEST}") ]]; then + printf "skip: %s not found!" "${VSOCK_TEST}" + printf " Please build the kselftest vsock target.\n" + exit "${KSFT_SKIP}" + fi +} + +check_vng() { + local tested_versions + local version + local ok + + tested_versions=("1.33" "1.36") + version="$(vng --version)" + + ok=0 + for tv in "${tested_versions[@]}"; do + if [[ "${version}" == *"${tv}"* ]]; then + ok=1 + break + fi + done + + if [[ ! "${ok}" -eq 1 ]]; then + printf "warning: vng version '%s' has not been tested and may " "${version}" >&2 + printf "not function properly.\n\tThe following versions have been tested: " >&2 + echo "${tested_versions[@]}" >&2 + fi +} + +handle_build() { + if [[ ! "${BUILD}" -eq 1 ]]; then + return + fi + + if [[ ! -d "${KERNEL_CHECKOUT}" ]]; then + echo "-b requires vmtest.sh called from the kernel source tree" >&2 + exit 1 + fi + + pushd "${KERNEL_CHECKOUT}" &>/dev/null + + if ! vng --kconfig --config "${SCRIPT_DIR}"/config; then + die "failed to generate .config for kernel source tree (${KERNEL_CHECKOUT})" + fi + + if ! make -j$(nproc); then + die "failed to build kernel from source tree (${KERNEL_CHECKOUT})" + fi + + popd &>/dev/null +} + +vm_start() { + local logfile=/dev/null + local verbose_opt="" + local kernel_opt="" + local qemu + + qemu=$(command -v "${QEMU}") + + if [[ "${VERBOSE}" -eq 1 ]]; then + verbose_opt="--verbose" + logfile=/dev/stdout + fi + + if [[ "${BUILD}" -eq 1 ]]; then + kernel_opt="${KERNEL_CHECKOUT}" + fi + + vng \ + --run \ + ${kernel_opt} \ + ${verbose_opt} \ + --qemu-opts="${QEMU_OPTS}" \ + --qemu="${qemu}" \ + --user root \ + --append "${KERNEL_CMDLINE}" \ + --rw &> ${logfile} & + + if ! timeout ${WAIT_TOTAL} \ + bash -c 'while [[ ! -s '"${QEMU_PIDFILE}"' ]]; do sleep 1; done; exit 0'; then + die "failed to boot VM" + fi +} + +vm_wait_for_ssh() { + local i + + i=0 + while true; do + if [[ ${i} -gt ${WAIT_PERIOD_MAX} ]]; then + die "Timed out waiting for guest ssh" + fi + if vm_ssh -- true; then + break + fi + i=$(( i + 1 )) + sleep ${WAIT_PERIOD} + done +} + +# derived from selftests/net/net_helper.sh +wait_for_listener() +{ + local port=$1 + local interval=$2 + local max_intervals=$3 + local protocol=tcp + local pattern + local i + + pattern=":$(printf "%04X" "${port}") " + + # for tcp protocol additionally check the socket state + [ "${protocol}" = "tcp" ] && pattern="${pattern}0A" + for i in $(seq "${max_intervals}"); do + if awk '{print $2" "$4}' /proc/net/"${protocol}"* | \ + grep -q "${pattern}"; then + break + fi + sleep "${interval}" + done +} + +vm_wait_for_listener() { + local port=$1 + + vm_ssh <<EOF +$(declare -f wait_for_listener) +wait_for_listener ${port} ${WAIT_PERIOD} ${WAIT_PERIOD_MAX} +EOF +} + +host_wait_for_listener() { + wait_for_listener "${TEST_HOST_PORT_LISTENER}" "${WAIT_PERIOD}" "${WAIT_PERIOD_MAX}" +} + +__log_stdin() { + cat | awk '{ printf "%s:\t%s\n","'"${prefix}"'", $0 }' +} + +__log_args() { + echo "$*" | awk '{ printf "%s:\t%s\n","'"${prefix}"'", $0 }' +} + +log() { + local prefix="$1" + + shift + local redirect= + if [[ ${VERBOSE} -eq 0 ]]; then + redirect=/dev/null + else + redirect=/dev/stdout + fi + + if [[ "$#" -eq 0 ]]; then + __log_stdin | tee -a "${LOG}" > ${redirect} + else + __log_args "$@" | tee -a "${LOG}" > ${redirect} + fi +} + +log_setup() { + log "setup" "$@" +} + +log_host() { + local testname=$1 + + shift + log "test:${testname}:host" "$@" +} + +log_guest() { + local testname=$1 + + shift + log "test:${testname}:guest" "$@" +} + +test_vm_server_host_client() { + local testname="${FUNCNAME[0]#test_}" + + vm_ssh -- "${VSOCK_TEST}" \ + --mode=server \ + --control-port="${TEST_GUEST_PORT}" \ + --peer-cid=2 \ + 2>&1 | log_guest "${testname}" & + + vm_wait_for_listener "${TEST_GUEST_PORT}" + + ${VSOCK_TEST} \ + --mode=client \ + --control-host=127.0.0.1 \ + --peer-cid="${VSOCK_CID}" \ + --control-port="${TEST_HOST_PORT}" 2>&1 | log_host "${testname}" + + return $? +} + +test_vm_client_host_server() { + local testname="${FUNCNAME[0]#test_}" + + ${VSOCK_TEST} \ + --mode "server" \ + --control-port "${TEST_HOST_PORT_LISTENER}" \ + --peer-cid "${VSOCK_CID}" 2>&1 | log_host "${testname}" & + + host_wait_for_listener + + vm_ssh -- "${VSOCK_TEST}" \ + --mode=client \ + --control-host=10.0.2.2 \ + --peer-cid=2 \ + --control-port="${TEST_HOST_PORT_LISTENER}" 2>&1 | log_guest "${testname}" + + return $? +} + +test_vm_loopback() { + local testname="${FUNCNAME[0]#test_}" + local port=60000 # non-forwarded local port + + vm_ssh -- "${VSOCK_TEST}" \ + --mode=server \ + --control-port="${port}" \ + --peer-cid=1 2>&1 | log_guest "${testname}" & + + vm_wait_for_listener "${port}" + + vm_ssh -- "${VSOCK_TEST}" \ + --mode=client \ + --control-host="127.0.0.1" \ + --control-port="${port}" \ + --peer-cid=1 2>&1 | log_guest "${testname}" + + return $? +} + +run_test() { + local host_oops_cnt_before + local host_warn_cnt_before + local vm_oops_cnt_before + local vm_warn_cnt_before + local host_oops_cnt_after + local host_warn_cnt_after + local vm_oops_cnt_after + local vm_warn_cnt_after + local name + local rc + + host_oops_cnt_before=$(dmesg | grep -c -i 'Oops') + host_warn_cnt_before=$(dmesg --level=warn | wc -l) + vm_oops_cnt_before=$(vm_ssh -- dmesg | grep -c -i 'Oops') + vm_warn_cnt_before=$(vm_ssh -- dmesg --level=warn | wc -l) + + name=$(echo "${1}" | awk '{ print $1 }') + eval test_"${name}" + rc=$? + + host_oops_cnt_after=$(dmesg | grep -i 'Oops' | wc -l) + if [[ ${host_oops_cnt_after} -gt ${host_oops_cnt_before} ]]; then + echo "FAIL: kernel oops detected on host" | log_host "${name}" + rc=$KSFT_FAIL + fi + + host_warn_cnt_after=$(dmesg --level=warn | wc -l) + if [[ ${host_warn_cnt_after} -gt ${host_warn_cnt_before} ]]; then + echo "FAIL: kernel warning detected on host" | log_host "${name}" + rc=$KSFT_FAIL + fi + + vm_oops_cnt_after=$(vm_ssh -- dmesg | grep -i 'Oops' | wc -l) + if [[ ${vm_oops_cnt_after} -gt ${vm_oops_cnt_before} ]]; then + echo "FAIL: kernel oops detected on vm" | log_host "${name}" + rc=$KSFT_FAIL + fi + + vm_warn_cnt_after=$(vm_ssh -- dmesg --level=warn | wc -l) + if [[ ${vm_warn_cnt_after} -gt ${vm_warn_cnt_before} ]]; then + echo "FAIL: kernel warning detected on vm" | log_host "${name}" + rc=$KSFT_FAIL + fi + + return "${rc}" +} + +QEMU="qemu-system-$(uname -m)" + +while getopts :hvsq:b o +do + case $o in + v) VERBOSE=1;; + b) BUILD=1;; + q) QEMU=$OPTARG;; + h|*) usage;; + esac +done +shift $((OPTIND-1)) + +trap cleanup EXIT + +if [[ ${#} -eq 0 ]]; then + ARGS=("${TEST_NAMES[@]}") +else + ARGS=("$@") +fi + +check_args "${ARGS[@]}" +check_deps +check_vng +handle_build + +echo "1..${#ARGS[@]}" + +log_setup "Booting up VM" +vm_start +vm_wait_for_ssh +log_setup "VM booted up" + +cnt_pass=0 +cnt_fail=0 +cnt_skip=0 +cnt_total=0 +for arg in "${ARGS[@]}"; do + run_test "${arg}" + rc=$? + if [[ ${rc} -eq $KSFT_PASS ]]; then + cnt_pass=$(( cnt_pass + 1 )) + echo "ok ${cnt_total} ${arg}" + elif [[ ${rc} -eq $KSFT_SKIP ]]; then + cnt_skip=$(( cnt_skip + 1 )) + echo "ok ${cnt_total} ${arg} # SKIP" + elif [[ ${rc} -eq $KSFT_FAIL ]]; then + cnt_fail=$(( cnt_fail + 1 )) + echo "not ok ${cnt_total} ${arg} # exit=$rc" + fi + cnt_total=$(( cnt_total + 1 )) +done + +echo "SUMMARY: PASS=${cnt_pass} SKIP=${cnt_skip} FAIL=${cnt_fail}" +echo "Log: ${LOG}" + +if [ $((cnt_pass + cnt_skip)) -eq ${cnt_total} ]; then + exit "$KSFT_PASS" +else + exit "$KSFT_FAIL" +fi --- base-commit: 8066e388be48f1ad62b0449dc1d31a25489fa12a change-id: 20250325-vsock-vmtest-b3a21d2102c2 Best regards, -- Bobby Eshleman <bobbyeshleman(a)gmail.com>

5 months

3
2
0 0

selftests/filesystem: clang warning null passed to a callee that requires a non-null argument [-Wnonnull]

by Naresh Kamboju

Regressions found on arm, arm64 and x86_64 building warnings with clang-20 and clang-nightly started from Linux next-20250603 Regressions found on arm, arm64 and x86_64 - selftests/filesystem Regression Analysis: - New regression? Yes - Reproducible? Yes First seen on the next-20250603 Good: next-20250530 Bad: next-20250603 Test regression: arm arm64 x86_64 clang warning null passed to a callee that requires a non-null argument [-Wnonnull] Reported-by: Linux Kernel Functional Testing <lkft(a)linaro.org> ## Build warnings make[4]: Entering directory '/builds/linux/tools/testing/selftests/filesystems' CC devpts_pts CC file_stressor CC anon_inode_test anon_inode_test.c:45:37: warning: null passed to a callee that requires a non-null argument [-Wnonnull] 45 | ASSERT_LT(execveat(fd_context, "", NULL, NULL, AT_EMPTY_PATH), 0); | ^~~~ ## Source * Kernel version: 6.15.0-next-20250605 * Git tree: https://kernel.googlesource.com/pub/scm/linux/kernel/git/next/linux-next.git * Git sha: a0bea9e39035edc56a994630e6048c8a191a99d8 * Toolchain: Debian clang version 21.0.0 (++20250529012636+c474f8f2404d-1~exp1~20250529132821.1479) ## Build * Test log: https://qa-reports.linaro.org/api/testruns/28651387/log_file/ * Build link: https://storage.tuxsuite.com/public/linaro/lkft/builds/2xzM4wMl8SvuLKE3mw3c… * Kernel config: https://storage.tuxsuite.com/public/linaro/lkft/builds/2xzM4wMl8SvuLKE3mw3c… -- Linaro LKFT https://lkft.linaro.org

5 months

3
3
0 0

[PATCH v3] KVM: SEV: Disable SEV-SNP support on initialization failure

by Ashish Kalra

From: Ashish Kalra <ashish.kalra(a)amd.com> During platform init, SNP initialization may fail for several reasons, such as firmware command failures and incompatible versions. However, the KVM capability may continue to advertise support for it. The platform may have SNP enabled but if SNP_INIT fails then SNP is not supported by KVM. During KVM module initialization query the SNP platform status to obtain the SNP initialization state and use it as an additional condition to determine support for SEV-SNP. Co-developed-by: Sean Christopherson <seanjc(a)google.com> Signed-off-by: Sean Christopherson <seanjc(a)google.com> Co-developed-by: Pratik R. Sampat <prsampat(a)amd.com> Signed-off-by: Pratik R. Sampat <prsampat(a)amd.com> Reviewed-by: Tom Lendacky <thomas.lendacky(a)amd.com> Signed-off-by: Ashish Kalra <ashish.kalra(a)amd.com> --- arch/x86/kvm/svm/sev.c | 44 +++++++++++++++++++++++++++++++++--------- 1 file changed, 35 insertions(+), 9 deletions(-) diff --git a/arch/x86/kvm/svm/sev.c b/arch/x86/kvm/svm/sev.c index dea9480b9ff6..8c3b12e3de8c 100644 --- a/arch/x86/kvm/svm/sev.c +++ b/arch/x86/kvm/svm/sev.c @@ -2935,6 +2935,33 @@ void __init sev_set_cpu_caps(void) } } +static bool is_sev_snp_initialized(void) +{ + struct sev_user_data_snp_status *status; + struct sev_data_snp_addr buf; + bool initialized = false; + int ret, error = 0; + + status = snp_alloc_firmware_page(GFP_KERNEL | __GFP_ZERO); + if (!status) + return false; + + buf.address = __psp_pa(status); + ret = sev_do_cmd(SEV_CMD_SNP_PLATFORM_STATUS, &buf, &error); + if (ret) { + pr_err("SEV: SNP_PLATFORM_STATUS failed ret=%d, fw_error=%d (%#x)\n", + ret, error, error); + goto out; + } + + initialized = !!status->state; + +out: + snp_free_firmware_page(status); + + return initialized; +} + void __init sev_hardware_setup(void) { unsigned int eax, ebx, ecx, edx, sev_asid_count, sev_es_asid_count; @@ -3039,6 +3066,14 @@ void __init sev_hardware_setup(void) sev_snp_supported = sev_snp_enabled && cc_platform_has(CC_ATTR_HOST_SEV_SNP); out: + if (sev_enabled) { + init_args.probe = true; + if (sev_platform_init(&init_args)) + sev_supported = sev_es_supported = sev_snp_supported = false; + else if (sev_snp_supported) + sev_snp_supported = is_sev_snp_initialized(); + } + if (boot_cpu_has(X86_FEATURE_SEV)) pr_info("SEV %s (ASIDs %u - %u)\n", sev_supported ? min_sev_asid <= max_sev_asid ? "enabled" : @@ -3065,15 +3100,6 @@ void __init sev_hardware_setup(void) sev_supported_vmsa_features = 0; if (sev_es_debug_swap_enabled) sev_supported_vmsa_features |= SVM_SEV_FEAT_DEBUG_SWAP; - - if (!sev_enabled) - return; - - /* - * Do both SNP and SEV initialization at KVM module load. - */ - init_args.probe = true; - sev_platform_init(&init_args); } void sev_hardware_unsetup(void) -- 2.34.1

5 months

5
4
0 0

[PATCH v2] selftests: cachestat: Refactor test to remove duplication

by Suresh K C

From: Suresh K C <suresh.k.chandrappa(a)gmail.com> Refactored the mmap and shmem test logic into a common function to reduce code duplication and improve maintainability Changes in v2: Refactored mmap and shmem tests into a common function Renamed test function to run_cachestat_test() Removed test for /proc/cpuinfo as a general /proc test case already exists Signed-off-by: Suresh K C <suresh.k.chandrappa(a)gmail.com> --- .../selftests/cachestat/test_cachestat.c | 97 ++++++------------- 1 file changed, 30 insertions(+), 67 deletions(-) diff --git a/tools/testing/selftests/cachestat/test_cachestat.c b/tools/testing/selftests/cachestat/test_cachestat.c index 81e7f6dd2279..7c2f64175943 100644 --- a/tools/testing/selftests/cachestat/test_cachestat.c +++ b/tools/testing/selftests/cachestat/test_cachestat.c @@ -22,7 +22,7 @@ static const char * const dev_files[] = { "/dev/zero", "/dev/null", "/dev/urandom", - "/proc/version","/proc/cpuinfo","/proc" + "/proc/version","/proc" }; void print_cachestat(struct cachestat *cs) @@ -33,6 +33,11 @@ void print_cachestat(struct cachestat *cs) cs->nr_evicted, cs->nr_recently_evicted); } +enum file_type { + FILE_MMAP, + FILE_SHMEM +}; + bool write_exactly(int fd, size_t filesize) { int random_fd = open("/dev/urandom", O_RDONLY); @@ -202,66 +207,8 @@ static int test_cachestat(const char *filename, bool write_random, bool create, return ret; } -bool test_cachestat_mmap(void){ - - size_t PS = sysconf(_SC_PAGESIZE); - size_t filesize = PS * 512 * 2;; - int syscall_ret; - size_t compute_len = PS * 512; - struct cachestat_range cs_range = { PS, compute_len }; - char *filename = "tmpshmcstat"; - unsigned long num_pages = compute_len / PS; - struct cachestat cs; - bool ret = true; - int fd = open(filename, O_RDWR | O_CREAT | O_TRUNC, 0666); - if (fd < 0) { - ksft_print_msg("Unable to create mmap file.\n"); - ret = false; - goto out; - } - if (ftruncate(fd, filesize)) { - ksft_print_msg("Unable to truncate mmap file.\n"); - ret = false; - goto close_fd; - } - if (!write_exactly(fd, filesize)) { - ksft_print_msg("Unable to write to mmap file.\n"); - ret = false; - goto close_fd; - } - char *map = mmap(NULL, filesize, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); - if (map == MAP_FAILED) { - ksft_print_msg("mmap failed.\n"); - ret = false; - goto close_fd; - } - - for (int i = 0; i < filesize; i++) { - map[i] = 'A'; - } - map[filesize - 1] = 'X'; - - syscall_ret = syscall(__NR_cachestat, fd, &cs_range, &cs, 0); - - if (syscall_ret) { - ksft_print_msg("Cachestat returned non-zero.\n"); - ret = false; - } else { - print_cachestat(&cs); - if (cs.nr_cache + cs.nr_evicted != num_pages) { - ksft_print_msg("Total number of cached and evicted pages is off.\n"); - ret = false; - } - } - -close_fd: - close(fd); - unlink(filename); -out: - return ret; -} -bool test_cachestat_shmem(void) +bool run_cachestat_test(enum file_type type) { size_t PS = sysconf(_SC_PAGESIZE); size_t filesize = PS * 512 * 2; /* 2 2MB huge pages */ @@ -271,27 +218,43 @@ bool test_cachestat_shmem(void) char *filename = "tmpshmcstat"; struct cachestat cs; bool ret = true; + int fd; unsigned long num_pages = compute_len / PS; - int fd = shm_open(filename, O_CREAT | O_RDWR, 0600); + if (type == FILE_SHMEM) + fd = shm_open(filename, O_CREAT | O_RDWR, 0600); + else + fd = open(filename, O_RDWR | O_CREAT | O_TRUNC, 0666); if (fd < 0) { - ksft_print_msg("Unable to create shmem file.\n"); + ksft_print_msg("Unable to create file.\n"); ret = false; goto out; } if (ftruncate(fd, filesize)) { - ksft_print_msg("Unable to truncate shmem file.\n"); + ksft_print_msg("Unable to truncate file.\n"); ret = false; goto close_fd; } if (!write_exactly(fd, filesize)) { - ksft_print_msg("Unable to write to shmem file.\n"); + ksft_print_msg("Unable to write to file.\n"); ret = false; goto close_fd; } + if (type == FILE_MMAP){ + char *map = mmap(NULL, filesize, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); + if (map == MAP_FAILED) { + ksft_print_msg("mmap failed.\n"); + ret = false; + goto close_fd; + } + for (int i = 0; i < filesize; i++) { + map[i] = 'A'; + } + map[filesize - 1] = 'X'; + } syscall_ret = syscall(__NR_cachestat, fd, &cs_range, &cs, 0); if (syscall_ret) { @@ -333,7 +296,7 @@ int main(void) ret = 1; } - for (int i = 0; i < 6; i++) { + for (int i = 0; i < 5; i++) { const char *dev_filename = dev_files[i]; if (test_cachestat(dev_filename, false, false, false, @@ -367,14 +330,14 @@ int main(void) break; } - if (test_cachestat_shmem()) + if (run_cachestat_test(FILE_SHMEM)) ksft_test_result_pass("cachestat works with a shmem file\n"); else { ksft_test_result_fail("cachestat fails with a shmem file\n"); ret = 1; } - if (test_cachestat_mmap()) + if (run_cachestat_test(FILE_MMAP)) ksft_test_result_pass("cachestat works with a mmap file\n"); else { ksft_test_result_fail("cachestat fails with a mmap file\n"); -- 2.43.0

5 months

1
0
0 0

[PATCH v8 RESEND iproute2-next 0/1] DUALPI2 iproute2 patch

by chia-yu.chang＠nokia-bell-labs.com

From: Chia-Yu Chang <chia-yu.chang(a)nokia-bell-labs.com> Hello, Please find DUALPI2 iproute2 patch v8. v8 (09-May-25) - Update pkt_sched.h with the one in nex-next - Correct a typo in the comment within pkt_sched.h (ALOK TIWARI <alok.a.tiwari(a)oracle.com>) - Update manual content in man/man8/tc-dualpi2.8 (ALOK TIWARI <alok.a.tiwari(a)oracle.com>) - Update tc/q_dualpi2.c to fix missing blank lines and add missing case (ALOK TIWARI <alok.a.tiwari(a)oracle.com>) v7 (05-May-25) - Align pkt_sched.h with the v14 version of net-next due to spec modification in tc.yaml - Reorganize dualpi2_print_opt() to match the order in tc.yaml - Remove credit-queue in PRINT_JSON v6 (26-Apr-25) - Update JSON file output due to spec modification in tc.yaml of net-next v5 (25-Mar-25) - Use matches() to replace current strcmp() (Stephen Hemminger <stephen(a)networkplumber.org>) - Use general parse_percent() for handling scaled percentage values (Stephen Hemminger <stephen(a)networkplumber.org>) - Add print function for JSON of dualpi2 stats (Stephen Hemminger <stephen(a)networkplumber.org>) v4 (16-Mar-25) - Add min_qlen_step to the dualpi2 attribute as the minimum queue length in number of packets in the L-queue to start step marking. v3 (21-Feb-25) - Add memlimit to the dualpi2 attribute, and add memory_used, max_memory_used, and memory_limit in dualpi2 stats (Dave Taht <dave.taht(a)gmail.com>) - Update the manual to align with the latest implementation and clarify the queue naming and default unit - Use common "get_scaled_alpha_beta" and clean print_opt for Dualpi2 v2 (23-Oct-24) - Rename get_float in dualpi2 to get_float_min_max in utils.c - Move get_float from iplink_can.c in utils.c (Stephen Hemminger <stephen(a)networkplumber.org>) - Add print function for JSON of dualpi2 (Stephen Hemminger <stephen(a)networkplumber.org>) For more details of DualPI2, please refer IETF RFC9332 (https://datatracker.ietf.org/doc/html/rfc9332). Best Regards, Chia-Yu Chia-Yu Chang (1): tc: add dualpi2 scheduler module bash-completion/tc | 11 +- include/uapi/linux/pkt_sched.h | 68 +++++ include/utils.h | 2 + ip/iplink_can.c | 14 - lib/utils.c | 30 ++ man/man8/tc-dualpi2.8 | 249 +++++++++++++++ tc/Makefile | 1 + tc/q_dualpi2.c | 534 +++++++++++++++++++++++++++++++++ 8 files changed, 894 insertions(+), 15 deletions(-) create mode 100644 man/man8/tc-dualpi2.8 create mode 100644 tc/q_dualpi2.c -- 2.34.1

5 months

2
2
0 0

[PATCH net v2 0/2] Fix ntuple rules targeting default RSS

by Gal Pressman

This series addresses a regression in ethtool flow steering where rules targeting the default RSS context (context 0) were incorrectly rejected. The default RSS context always exists but is not stored in the rss_ctx xarray like additional contexts. The current validation logic was checking for the existence of context 0 in this array, causing valid flow steering rules to be rejected. This prevented configurations such as: - High priority rules directing specific traffic to the default context - Low priority catch-all rules directing remaining traffic to additional contexts Patch 1 fixes the validation logic to skip the existence check for context 0. Patch 2 adds a selftest that verifies this behavior. Changelog - v1->v2: https://lore.kernel.org/all/20250225071348.509432-1-gal@nvidia.com/ * Reworded commit message. * Added a selftest. Gal Pressman (2): net: ethtool: Don't check if RSS context exists in case of context 0 selftests: drv-net: rss_ctx: Add test for ntuple rules targeting default RSS context net/ethtool/ioctl.c | 3 +- .../selftests/drivers/net/hw/rss_ctx.py | 59 ++++++++++++++++++- 2 files changed, 60 insertions(+), 2 deletions(-) -- 2.40.1

5 months

3
9
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror