[PATCH HID for-next v2 1/9] selftests: hid: add vmtest.sh

Similar-ish in many points from the script in selftests/bpf, with a few differences: - relies on boot2container instead of a plain qemu image (meaning that we can take any container in a registry as a base) - runs in the hid selftest dir, and such uses the test program from there - the working directory to store the config is in tools/selftests/hid/results

Signed-off-by: Benjamin Tissoires benjamin.tissoires@redhat.com

---

no changes in v2 --- tools/testing/selftests/hid/.gitignore | 1 + tools/testing/selftests/hid/config.common | 241 ++++++++++++++++++ tools/testing/selftests/hid/config.x86_64 | 4 + tools/testing/selftests/hid/vmtest.sh | 284 ++++++++++++++++++++++ 4 files changed, 530 insertions(+) create mode 100644 tools/testing/selftests/hid/config.common create mode 100644 tools/testing/selftests/hid/config.x86_64 create mode 100755 tools/testing/selftests/hid/vmtest.sh

diff --git a/tools/testing/selftests/hid/.gitignore b/tools/testing/selftests/hid/.gitignore index a462ca6ab2c0..995af0670f69 100644 --- a/tools/testing/selftests/hid/.gitignore +++ b/tools/testing/selftests/hid/.gitignore @@ -2,3 +2,4 @@ bpftool *.skel.h /tools hid_bpf +results diff --git a/tools/testing/selftests/hid/config.common b/tools/testing/selftests/hid/config.common new file mode 100644 index 000000000000..0617275d93cc --- /dev/null +++ b/tools/testing/selftests/hid/config.common @@ -0,0 +1,241 @@ +CONFIG_9P_FS_POSIX_ACL=y +CONFIG_9P_FS_SECURITY=y +CONFIG_9P_FS=y +CONFIG_AUDIT=y +CONFIG_BINFMT_MISC=y +CONFIG_BLK_CGROUP_IOLATENCY=y +CONFIG_BLK_CGROUP=y +CONFIG_BLK_DEV_BSGLIB=y +CONFIG_BLK_DEV_IO_TRACE=y +CONFIG_BLK_DEV_RAM_SIZE=16384 +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_THROTTLING=y +CONFIG_BONDING=y +CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y +CONFIG_BOOTTIME_TRACING=y +CONFIG_BSD_DISKLABEL=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_CFS_BANDWIDTH=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_CGROUP_DEBUG=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CGROUP_FREEZER=y +CONFIG_CGROUP_HUGETLB=y +CONFIG_CGROUP_NET_CLASSID=y +CONFIG_CGROUP_NET_PRIO=y +CONFIG_CGROUP_PERF=y +CONFIG_CGROUP_PIDS=y +CONFIG_CGROUP_RDMA=y +CONFIG_CGROUP_SCHED=y +CONFIG_CGROUPS=y +CONFIG_CGROUP_WRITEBACK=y +CONFIG_CMA_AREAS=7 +CONFIG_CMA=y +CONFIG_COMPAT_32BIT_TIME=y +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_STAT=y +CONFIG_CPU_IDLE_GOV_LADDER=y +CONFIG_CPUSETS=y +CONFIG_CRC_T10DIF=y +CONFIG_CRYPTO_BLAKE2B=y +CONFIG_CRYPTO_DEV_VIRTIO=y +CONFIG_CRYPTO_SEQIV=y +CONFIG_CRYPTO_XXHASH=y +CONFIG_DCB=y +CONFIG_DEBUG_ATOMIC_SLEEP=y +CONFIG_DEBUG_CREDENTIALS=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_DEFAULT_FQ_CODEL=y +CONFIG_DEFAULT_RENO=y +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_DEVTMPFS=y +CONFIG_DMA_CMA=y +CONFIG_DNS_RESOLVER=y +CONFIG_EFI_STUB=y +CONFIG_EFI=y +CONFIG_EXPERT=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_EXT4_FS_SECURITY=y +CONFIG_EXT4_FS=y +CONFIG_FAIL_FUNCTION=y +CONFIG_FAULT_INJECTION_DEBUG_FS=y +CONFIG_FAULT_INJECTION=y +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y +CONFIG_FB_VESA=y +CONFIG_FB=y +CONFIG_FONT_8x16=y +CONFIG_FONT_MINI_4x6=y +CONFIG_FONTS=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FUSE_FS=y +CONFIG_FW_LOADER_USER_HELPER=y +CONFIG_GART_IOMMU=y +CONFIG_GENERIC_PHY=y +CONFIG_HARDLOCKUP_DETECTOR=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_HPET=y +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +CONFIG_HWPOISON_INJECT=y +CONFIG_HZ_1000=y +CONFIG_INET=y +CONFIG_INTEL_POWERCLAMP=y +CONFIG_IP6_NF_FILTER=y +CONFIG_IP6_NF_IPTABLES=y +CONFIG_IP6_NF_NAT=y +CONFIG_IP6_NF_TARGET_MASQUERADE=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_MROUTE=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_NF_FILTER=y +CONFIG_IP_NF_IPTABLES=y +CONFIG_IP_NF_NAT=y +CONFIG_IP_NF_TARGET_MASQUERADE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IPV6_MIP6=y +CONFIG_IPV6_ROUTE_INFO=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_SEG6_LWTUNNEL=y +CONFIG_IPV6_SUBTREES=y +CONFIG_IRQ_POLL=y +CONFIG_JUMP_LABEL=y +CONFIG_KARMA_PARTITION=y +CONFIG_KEXEC=y +CONFIG_KPROBES=y +CONFIG_KSM=y +CONFIG_LEGACY_VSYSCALL_NONE=y +CONFIG_LOG_BUF_SHIFT=21 +CONFIG_LOG_CPU_MAX_BUF_SHIFT=0 +CONFIG_LOGO=y +CONFIG_LSM="selinux,bpf,integrity" +CONFIG_MAC_PARTITION=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_MCORE2=y +CONFIG_MEMCG=y +CONFIG_MEMORY_FAILURE=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_MODULES=y +CONFIG_NAMESPACES=y +CONFIG_NET_9P_VIRTIO=y +CONFIG_NET_9P=y +CONFIG_NET_ACT_BPF=y +CONFIG_NET_CLS_CGROUP=y +CONFIG_NETDEVICES=y +CONFIG_NET_EMATCH=y +CONFIG_NETFILTER_NETLINK_LOG=y +CONFIG_NETFILTER_NETLINK_QUEUE=y +CONFIG_NETFILTER_XTABLES=y +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=y +CONFIG_NETFILTER_XT_MATCH_BPF=y +CONFIG_NETFILTER_XT_MATCH_COMMENT=y +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y +CONFIG_NETFILTER_XT_MATCH_MARK=y +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y +CONFIG_NETFILTER_XT_MATCH_STATISTIC=y +CONFIG_NETFILTER_XT_NAT=y +CONFIG_NETFILTER_XT_TARGET_MASQUERADE=y +CONFIG_NET_IPGRE_BROADCAST=y +CONFIG_NET_L3_MASTER_DEV=y +CONFIG_NETLABEL=y +CONFIG_NET_SCH_DEFAULT=y +CONFIG_NET_SCHED=y +CONFIG_NET_SCH_FQ_CODEL=y +CONFIG_NET_TC_SKB_EXT=y +CONFIG_NET_VRF=y +CONFIG_NET=y +CONFIG_NF_CONNTRACK=y +CONFIG_NF_NAT_MASQUERADE=y +CONFIG_NF_NAT=y +CONFIG_NLS_ASCII=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_DEFAULT="utf8" +CONFIG_NO_HZ=y +CONFIG_NR_CPUS=128 +CONFIG_NUMA_BALANCING=y +CONFIG_NUMA=y +CONFIG_NVMEM=y +CONFIG_OSF_PARTITION=y +CONFIG_OVERLAY_FS_INDEX=y +CONFIG_OVERLAY_FS_METACOPY=y +CONFIG_OVERLAY_FS_XINO_AUTO=y +CONFIG_OVERLAY_FS=y +CONFIG_PACKET=y +CONFIG_PANIC_ON_OOPS=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_PCIEPORTBUS=y +CONFIG_PCI_IOV=y +CONFIG_PCI_MSI=y +CONFIG_PCI=y +CONFIG_PHYSICAL_ALIGN=0x1000000 +CONFIG_POSIX_MQUEUE=y +CONFIG_POWER_SUPPLY=y +CONFIG_PREEMPT=y +CONFIG_PRINTK_TIME=y +CONFIG_PROC_KCORE=y +CONFIG_PROFILING=y +CONFIG_PROVE_LOCKING=y +CONFIG_PTP_1588_CLOCK=y +CONFIG_RC_DEVICES=y +CONFIG_RC_LOOPBACK=y +CONFIG_RCU_CPU_STALL_TIMEOUT=60 +CONFIG_SCHED_STACK_END_CHECK=y +CONFIG_SCHEDSTATS=y +CONFIG_SECURITY_NETWORK=y +CONFIG_SECURITY_SELINUX=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RSA=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_NONSTANDARD=y +CONFIG_SERIO_LIBPS2=y +CONFIG_SGI_PARTITION=y +CONFIG_SMP=y +CONFIG_SOCK_CGROUP_DATA=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_SUN_PARTITION=y +CONFIG_SYNC_FILE=y +CONFIG_SYSVIPC=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +CONFIG_TASKSTATS=y +CONFIG_TASK_XACCT=y +CONFIG_TCP_CONG_ADVANCED=y +CONFIG_TCP_MD5SIG=y +CONFIG_TLS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_TMPFS=y +CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y +CONFIG_TRANSPARENT_HUGEPAGE=y +CONFIG_TUN=y +CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_UNIX=y +CONFIG_USER_NS=y +CONFIG_VALIDATE_FS_PARSER=y +CONFIG_VETH=y +CONFIG_VIRT_DRIVERS=y +CONFIG_VIRTIO_BALLOON=y +CONFIG_VIRTIO_BLK=y +CONFIG_VIRTIO_CONSOLE=y +CONFIG_VIRTIO_FS=y +CONFIG_VIRTIO_NET=y +CONFIG_VIRTIO_PCI=y +CONFIG_VLAN_8021Q=y +CONFIG_XFRM_SUB_POLICY=y +CONFIG_XFRM_USER=y +CONFIG_ZEROPLUS_FF=y diff --git a/tools/testing/selftests/hid/config.x86_64 b/tools/testing/selftests/hid/config.x86_64 new file mode 100644 index 000000000000..a8721f403c21 --- /dev/null +++ b/tools/testing/selftests/hid/config.x86_64 @@ -0,0 +1,4 @@ +CONFIG_X86_ACPI_CPUFREQ=y +CONFIG_X86_CPUID=y +CONFIG_X86_MSR=y +CONFIG_X86_POWERNOW_K8=y diff --git a/tools/testing/selftests/hid/vmtest.sh b/tools/testing/selftests/hid/vmtest.sh new file mode 100755 index 000000000000..90f34150f257 --- /dev/null +++ b/tools/testing/selftests/hid/vmtest.sh @@ -0,0 +1,284 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +set -u +set -e + +# This script currently only works for x86_64 +ARCH="$(uname -m)" +case "${ARCH}" in +x86_64) + QEMU_BINARY=qemu-system-x86_64 + BZIMAGE="arch/x86/boot/bzImage" + ;; +*) + echo "Unsupported architecture" + exit 1 + ;; +esac +DEFAULT_COMMAND="./hid_bpf" +SCRIPT_DIR="$(dirname $(realpath $0))" +OUTPUT_DIR="$SCRIPT_DIR/results" +KCONFIG_REL_PATHS=("${SCRIPT_DIR}/config" "${SCRIPT_DIR}/config.common" "${SCRIPT_DIR}/config.${ARCH}") +B2C_URL="https://gitlab.freedesktop.org/mupuf/boot2container/-/raw/master/vm2c.py" +NUM_COMPILE_JOBS="$(nproc)" +LOG_FILE_BASE="$(date +"hid_selftests.%Y-%m-%d_%H-%M-%S")" +LOG_FILE="${LOG_FILE_BASE}.log" +EXIT_STATUS_FILE="${LOG_FILE_BASE}.exit_status" +CONTAINER_IMAGE="registry.fedoraproject.org/fedora:36" + +usage() +{ + cat <<EOF +Usage: $0 [-i] [-s] [-d <output_dir>] -- [<command>] + +<command> is the command you would normally run when you are in +tools/testing/selftests/bpf. e.g: + + $0 -- ./hid_bpf + +If no command is specified and a debug shell (-s) is not requested, +"${DEFAULT_COMMAND}" will be run by default. + +If you build your kernel using KBUILD_OUTPUT= or O= options, these +can be passed as environment variables to the script: + + O=<kernel_build_path> $0 -- ./hid_bpf + +or + + KBUILD_OUTPUT=<kernel_build_path> $0 -- ./hid_bpf + +Options: + + -u) Update the boot2container script to a newer version. + -d) Update the output directory (default: ${OUTPUT_DIR}) + -j) Number of jobs for compilation, similar to -j in make + (default: ${NUM_COMPILE_JOBS}) + -s) Instead of powering off the VM, start an interactive + shell. If <command> is specified, the shell runs after + the command finishes executing +EOF +} + +download() +{ + local file="$1" + + echo "Downloading $file..." >&2 + curl -Lsf "$file" -o "${@:2}" +} + +recompile_kernel() +{ + local kernel_checkout="$1" + local make_command="$2" + + cd "${kernel_checkout}" + + ${make_command} olddefconfig + ${make_command} +} + +update_selftests() +{ + local kernel_checkout="$1" + local selftests_dir="${kernel_checkout}/tools/testing/selftests/hid" + + cd "${selftests_dir}" + ${make_command} +} + +run_vm() +{ + local b2c="$1" + local kernel_bzimage="$2" + local command="$3" + local post_command="" + + if ! which "${QEMU_BINARY}" &> /dev/null; then + cat <<EOF +Could not find ${QEMU_BINARY} +Please install qemu or set the QEMU_BINARY environment variable. +EOF + exit 1 + fi + + # alpine (used in post-container requires the PATH to have /bin + export PATH=$PATH:/bin + + if [[ "${debug_shell}" != "yes" ]] + then + touch ${OUTPUT_DIR}/${LOG_FILE} + command="mount bpffs -t bpf /sys/fs/bpf/; set -o pipefail ; ${command} 2>&1 | tee ${OUTPUT_DIR}/${LOG_FILE}" + post_command="cat ${OUTPUT_DIR}/${LOG_FILE}" + else + command="mount bpffs -t bpf /sys/fs/bpf/; ${command}" + fi + + set +e + $b2c --command "${command}" \ + --kernel ${kernel_bzimage} \ + --workdir ${OUTPUT_DIR} \ + --image ${CONTAINER_IMAGE} + + echo $? > ${OUTPUT_DIR}/${EXIT_STATUS_FILE} + + set -e + + ${post_command} +} + +is_rel_path() +{ + local path="$1" + + [[ ${path:0:1} != "/" ]] +} + +do_update_kconfig() +{ + local kernel_checkout="$1" + local kconfig_file="$2" + + rm -f "$kconfig_file" 2> /dev/null + + for config in "${KCONFIG_REL_PATHS[@]}"; do + local kconfig_src="${config}" + cat "$kconfig_src" >> "$kconfig_file" + done +} + +update_kconfig() +{ + local kernel_checkout="$1" + local kconfig_file="$2" + + if [[ -f "${kconfig_file}" ]]; then + local local_modified="$(stat -c %Y "${kconfig_file}")" + + for config in "${KCONFIG_REL_PATHS[@]}"; do + local kconfig_src="${config}" + local src_modified="$(stat -c %Y "${kconfig_src}")" + # Only update the config if it has been updated after the + # previously cached config was created. This avoids + # unnecessarily compiling the kernel and selftests. + if [[ "${src_modified}" -gt "${local_modified}" ]]; then + do_update_kconfig "$kernel_checkout" "$kconfig_file" + # Once we have found one outdated configuration + # there is no need to check other ones. + break + fi + done + else + do_update_kconfig "$kernel_checkout" "$kconfig_file" + fi +} + +main() +{ + local script_dir="$(cd -P -- "$(dirname -- "${BASH_SOURCE[0]}")" && pwd -P)" + local kernel_checkout=$(realpath "${script_dir}"/../../../../) + # By default the script searches for the kernel in the checkout directory but + # it also obeys environment variables O= and KBUILD_OUTPUT= + local kernel_bzimage="${kernel_checkout}/${BZIMAGE}" + local command="${DEFAULT_COMMAND}" + local update_b2c="no" + local debug_shell="no" + + while getopts ':hsud:j:' opt; do + case ${opt} in + u) + update_b2c="yes" + ;; + d) + OUTPUT_DIR="$OPTARG" + ;; + j) + NUM_COMPILE_JOBS="$OPTARG" + ;; + s) + command="/bin/sh" + debug_shell="yes" + ;; + h) + usage + exit 0 + ;; + ? ) + echo "Invalid Option: -$OPTARG" + usage + exit 1 + ;; + : ) + echo "Invalid Option: -$OPTARG requires an argument" + usage + exit 1 + ;; + esac + done + shift $((OPTIND -1)) + + # trap 'catch "$?"' EXIT + + if [[ "${debug_shell}" == "no" ]]; then + if [[ $# -eq 0 ]]; then + echo "No command specified, will run ${DEFAULT_COMMAND} in the vm" + else + command="$@" + + if [[ "${command}" == "/bin/bash" || "${command}" == "bash" ]] + then + debug_shell="yes" + fi + fi + fi + + local kconfig_file="${OUTPUT_DIR}/latest.config" + local make_command="make -j ${NUM_COMPILE_JOBS} KCONFIG_CONFIG=${kconfig_file}" + + # Figure out where the kernel is being built. + # O takes precedence over KBUILD_OUTPUT. + if [[ "${O:=""}" != "" ]]; then + if is_rel_path "${O}"; then + O="$(realpath "${PWD}/${O}")" + fi + kernel_bzimage="${O}/${BZIMAGE}" + make_command="${make_command} O=${O}" + elif [[ "${KBUILD_OUTPUT:=""}" != "" ]]; then + if is_rel_path "${KBUILD_OUTPUT}"; then + KBUILD_OUTPUT="$(realpath "${PWD}/${KBUILD_OUTPUT}")" + fi + kernel_bzimage="${KBUILD_OUTPUT}/${BZIMAGE}" + make_command="${make_command} KBUILD_OUTPUT=${KBUILD_OUTPUT}" + fi + + local b2c="${OUTPUT_DIR}/vm2c.py" + + echo "Output directory: ${OUTPUT_DIR}" + + mkdir -p "${OUTPUT_DIR}" + update_kconfig "${kernel_checkout}" "${kconfig_file}" + + recompile_kernel "${kernel_checkout}" "${make_command}" + + if [[ "${update_b2c}" == "no" && ! -f "${b2c}" ]]; then + echo "vm2c script not found in ${b2c}" + update_b2c="yes" + fi + + if [[ "${update_b2c}" == "yes" ]]; then + download $B2C_URL $b2c + chmod +x $b2c + fi + + update_selftests "${kernel_checkout}" "${make_command}" + run_vm $b2c "${kernel_bzimage}" "${command}" + if [[ "${debug_shell}" != "yes" ]]; then + echo "Logs saved in ${OUTPUT_DIR}/${LOG_FILE}" + fi + + exit $(cat ${OUTPUT_DIR}/${EXIT_STATUS_FILE}) +} + +main "$@"