Add a test to v_ptrace test suite to verify that ptrace accepts the valid input combinations of vector csr registers. Use kselftest fixture variants to create multiple inputs for the test.
The test simulates a debug scenario with three breakpoints: 0. init: let the tracee set up its initial vector configuration 1. 1st bp: modify the tracee's vector csr registers from the debugger - resume the tracee to execute a block without vector instructions 2. 2nd bp: read back the tracees's vector csr registers from the debugger - compare with values set by the debugger - resume the tracee to execute a block with vector instructions 3. 3rd bp: read back the tracess's vector csr registers again - compare with values set by the debugger
The last check helps to confirm that ptrace validation check for vector csr registers input values works properly and maintains an accurate view of the tracee's vector context in debugger.
Signed-off-by: Sergey Matyukevich geomatsi@gmail.com --- .../riscv/vector/validate_v_ptrace.c | 262 ++++++++++++++++++ 1 file changed, 262 insertions(+)
diff --git a/tools/testing/selftests/riscv/vector/validate_v_ptrace.c b/tools/testing/selftests/riscv/vector/validate_v_ptrace.c index 623b13e7582e..c72533a331de 100644 --- a/tools/testing/selftests/riscv/vector/validate_v_ptrace.c +++ b/tools/testing/selftests/riscv/vector/validate_v_ptrace.c @@ -654,4 +654,266 @@ TEST_F(v_csr_invalid, ptrace_v_invalid_values) } }
+FIXTURE(v_csr_valid) +{ +}; + +FIXTURE_SETUP(v_csr_valid) +{ +} + +FIXTURE_TEARDOWN(v_csr_valid) +{ +} + +/* modifications of the initial vsetvli settings */ +FIXTURE_VARIANT(v_csr_valid) +{ + unsigned long vstart; + unsigned long vl; + unsigned long vtype; + unsigned long vcsr; + unsigned long vlenb_mul; + unsigned long vlenb_min; + unsigned long vlenb_max; + unsigned long spec; +}; + +/* valid for VLEN >= 128: LMUL= 1/4, SEW = 32 */ +FIXTURE_VARIANT_ADD(v_csr_valid, frac_lmul1) +{ + .vstart = 0x0, + .vl = 0x0, + .vtype = 0x16, + .vcsr = 0x0, + .vlenb_mul = 0x1, + .vlenb_min = 0x10, + .vlenb_max = 0x0, + .spec = VECTOR_1_0, +}; + +/* valid for VLEN >= 16: LMUL= 2, SEW = 32 */ +FIXTURE_VARIANT_ADD(v_csr_valid, int_lmul1) +{ + .vstart = 0x0, + .vl = 0x0, + .vtype = 0x11, + .vcsr = 0x0, + .vlenb_mul = 0x1, + .vlenb_min = 0x2, + .vlenb_max = 0x0, + .spec = VECTOR_1_0, +}; + +/* valid for XTheadVector VLEN >= 16: LMUL= 2, SEW = 32 */ +FIXTURE_VARIANT_ADD(v_csr_valid, int_lmul2) +{ + .vstart = 0x0, + .vl = 0x0, + .vtype = 0x9, + .vcsr = 0x0, + .vlenb_mul = 0x1, + .vlenb_min = 0x2, + .vlenb_max = 0x0, + .spec = XTHEAD_VECTOR_0_7, +}; + +/* valid for VLEN >= 32: LMUL= 2, SEW = 32, VL = 2 */ +FIXTURE_VARIANT_ADD(v_csr_valid, int_lmul3) +{ + .vstart = 0x0, + .vl = 0x2, + .vtype = 0x11, + .vcsr = 0x0, + .vlenb_mul = 0x1, + .vlenb_min = 0x4, + .vlenb_max = 0x0, + .spec = VECTOR_1_0, +}; + +TEST_F(v_csr_valid, ptrace_v_valid_values) +{ + unsigned long vlenb; + pid_t pid; + + if (!is_vector_supported() && !is_xtheadvector_supported()) + SKIP(return, "Vectors not supported"); + + if (is_vector_supported() && !vector_test(variant->spec)) + SKIP(return, "Test not supported for Vector"); + + if (is_xtheadvector_supported() && !xthead_test(variant->spec)) + SKIP(return, "Test not supported for XTheadVector"); + + vlenb = get_vr_len(); + + if (variant->vlenb_min) { + if (vlenb < variant->vlenb_min) + SKIP(return, "This test does not support VLEN < %lu\n", + variant->vlenb_min * 8); + } + if (variant->vlenb_max) { + if (vlenb > variant->vlenb_max) + SKIP(return, "This test does not support VLEN > %lu\n", + variant->vlenb_max * 8); + } + + chld_lock = 1; + pid = fork(); + ASSERT_LE(0, pid) + TH_LOG("fork: %m"); + + if (pid == 0) { + unsigned long vl; + + while (chld_lock == 1) + asm volatile("" : : "g"(chld_lock) : "memory"); + + if (is_xtheadvector_supported()) { + asm volatile ( + // 0 | zimm[10:0] | rs1 | 1 1 1 | rd |1010111| vsetvli + // vsetvli t4, x0, e16, m2, d1 + ".4byte 0b00000000010100000111111011010111\n" + "mv %[new_vl], t4\n" + : [new_vl] "=r" (vl) : : "t4"); + } else { + asm volatile ( + ".option push\n" + ".option arch, +zve32x\n" + "vsetvli %[new_vl], x0, e16, m2, tu, mu\n" + ".option pop\n" + : [new_vl] "=r"(vl) : : ); + } + + asm volatile ( + ".option push\n" + ".option norvc\n" + ".option arch, +zve32x\n" + "ebreak\n" /* breakpoint 1: apply new V state using ptrace */ + "nop\n" + "ebreak\n" /* breakpoint 2: V state clean - context will not be saved */ + "vmv.v.i v0, -1\n" + "ebreak\n" /* breakpoint 3: V state dirty - context will be saved */ + ".option pop\n"); + } else { + struct __riscv_v_regset_state *regset_data; + struct user_regs_struct regs; + size_t regset_size; + struct iovec iov; + int status; + + /* attach */ + + ASSERT_EQ(0, ptrace(PTRACE_ATTACH, pid, NULL, NULL)); + ASSERT_EQ(pid, waitpid(pid, &status, 0)); + ASSERT_TRUE(WIFSTOPPED(status)); + + /* unlock */ + + ASSERT_EQ(0, ptrace(PTRACE_POKEDATA, pid, &chld_lock, 0)); + + /* resume and wait for the 1st ebreak */ + + ASSERT_EQ(0, ptrace(PTRACE_CONT, pid, NULL, NULL)); + ASSERT_EQ(pid, waitpid(pid, &status, 0)); + ASSERT_TRUE(WIFSTOPPED(status)); + + /* read tracee vector csr regs using ptrace GETREGSET */ + + regset_size = sizeof(*regset_data) + vlenb * 32; + regset_data = calloc(1, regset_size); + + iov.iov_base = regset_data; + iov.iov_len = regset_size; + + ASSERT_EQ(0, ptrace(PTRACE_GETREGSET, pid, NT_RISCV_VECTOR, &iov)); + + /* verify initial vsetvli settings */ + + if (is_xtheadvector_supported()) { + EXPECT_EQ(5UL, regset_data->vtype); + } else { + EXPECT_EQ(9UL, regset_data->vtype); + } + + EXPECT_EQ(regset_data->vlenb, regset_data->vl); + EXPECT_EQ(vlenb, regset_data->vlenb); + EXPECT_EQ(0UL, regset_data->vstart); + EXPECT_EQ(0UL, regset_data->vcsr); + + /* apply valid settings from fixture variants */ + + regset_data->vlenb *= variant->vlenb_mul; + regset_data->vstart = variant->vstart; + regset_data->vtype = variant->vtype; + regset_data->vcsr = variant->vcsr; + regset_data->vl = variant->vl; + + iov.iov_base = regset_data; + iov.iov_len = regset_size; + + ASSERT_EQ(0, ptrace(PTRACE_SETREGSET, pid, NT_RISCV_VECTOR, &iov)); + + /* skip 1st ebreak, then resume and wait for the 2nd ebreak */ + + iov.iov_base = ®s; + iov.iov_len = sizeof(regs); + + ASSERT_EQ(0, ptrace(PTRACE_GETREGSET, pid, NT_PRSTATUS, &iov)); + regs.pc += 4; + ASSERT_EQ(0, ptrace(PTRACE_SETREGSET, pid, NT_PRSTATUS, &iov)); + + ASSERT_EQ(0, ptrace(PTRACE_CONT, pid, NULL, NULL)); + ASSERT_EQ(pid, waitpid(pid, &status, 0)); + ASSERT_TRUE(WIFSTOPPED(status)); + + /* read tracee vector csr regs using ptrace GETREGSET */ + + iov.iov_base = regset_data; + iov.iov_len = regset_size; + + ASSERT_EQ(0, ptrace(PTRACE_GETREGSET, pid, NT_RISCV_VECTOR, &iov)); + + /* verify vector csr regs from tracee context */ + + EXPECT_EQ(regset_data->vstart, variant->vstart); + EXPECT_EQ(regset_data->vtype, variant->vtype); + EXPECT_EQ(regset_data->vcsr, variant->vcsr); + EXPECT_EQ(regset_data->vl, variant->vl); + EXPECT_EQ(regset_data->vlenb, vlenb); + + /* skip 2nd ebreak, then resume and wait for the 3rd ebreak */ + + iov.iov_base = ®s; + iov.iov_len = sizeof(regs); + + ASSERT_EQ(0, ptrace(PTRACE_GETREGSET, pid, NT_PRSTATUS, &iov)); + regs.pc += 4; + ASSERT_EQ(0, ptrace(PTRACE_SETREGSET, pid, NT_PRSTATUS, &iov)); + + ASSERT_EQ(0, ptrace(PTRACE_CONT, pid, NULL, NULL)); + ASSERT_EQ(pid, waitpid(pid, &status, 0)); + ASSERT_TRUE(WIFSTOPPED(status)); + + /* read tracee vector csr regs using ptrace GETREGSET */ + + iov.iov_base = regset_data; + iov.iov_len = regset_size; + + ASSERT_EQ(0, ptrace(PTRACE_GETREGSET, pid, NT_RISCV_VECTOR, &iov)); + + /* verify vector csr regs from tracee context */ + + EXPECT_EQ(regset_data->vstart, variant->vstart); + EXPECT_EQ(regset_data->vtype, variant->vtype); + EXPECT_EQ(regset_data->vcsr, variant->vcsr); + EXPECT_EQ(regset_data->vl, variant->vl); + EXPECT_EQ(regset_data->vlenb, vlenb); + + /* cleanup */ + + ASSERT_EQ(0, kill(pid, SIGKILL)); + } +} + TEST_HARNESS_MAIN