This patchset adds a test for "tc action mirred mirror" where the mirrored-to device is a gretap, and underlay path contains a team device.
In patch #1 require_command() is added, which should henceforth be used to declare dependence on a certain tool.
In patch #2, two new functions, team_create() and team_destroy(), are added to lib.sh.
The newly-added test uses arping, which isn't necessarily available. Therefore patch #3 introduces $ARPING, and a preexisting test is fixed to require_command $ARPING.
In patches #4 and #5, two new tests are added. In both cases, a team device is on egress path of a mirrored packet in a mirror-to-gretap scenario. In the first one, the team device is in loadbalance mode, in the second one it's in lacp mode. (The difference in modes necessitates a different testing strategy, hence two test cases instead of just parameterizing one.)
Petr Machata (5): selftests: forwarding: lib: Add require_command() selftests: forwarding: lib: Support team devices selftests: forwarding: Introduce $ARPING selftests: forwarding: Test mirror-to-gretap w/ UL team selftests: forwarding: Test mirror-to-gretap w/ UL team LACP
tools/testing/selftests/net/forwarding/lib.sh | 43 +++- .../net/forwarding/mirror_gre_bridge_1q_lag.sh | 283 ++++++++++++++++++++ .../net/forwarding/mirror_gre_lag_lacp.sh | 285 +++++++++++++++++++++ .../net/forwarding/mirror_gre_vlan_bridge_1q.sh | 6 +- 4 files changed, 607 insertions(+), 10 deletions(-) create mode 100755 tools/testing/selftests/net/forwarding/mirror_gre_bridge_1q_lag.sh create mode 100755 tools/testing/selftests/net/forwarding/mirror_gre_lag_lacp.sh
The logic for testing whether a certain command is available is used several times in the current code base. The tests in follow-up patches add more requirements like that.
Therefore extract the logic into a named function, require_command(), that can be used directly from lib.sh as well as from any test that wishes to declare dependence on some command.
Signed-off-by: Petr Machata petrm@mellanox.com --- tools/testing/selftests/net/forwarding/lib.sh | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-)
diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh index 158d59ffee40..81e36157bf16 100644 --- a/tools/testing/selftests/net/forwarding/lib.sh +++ b/tools/testing/selftests/net/forwarding/lib.sh @@ -62,15 +62,18 @@ if [[ "$CHECK_TC" = "yes" ]]; then check_tc_version fi
-if [[ ! -x "$(command -v jq)" ]]; then - echo "SKIP: jq not installed" - exit 1 -fi +require_command() +{ + local cmd=$1; shift
-if [[ ! -x "$(command -v $MZ)" ]]; then - echo "SKIP: $MZ not installed" - exit 1 -fi + if [[ ! -x "$(command -v "$cmd")" ]]; then + echo "SKIP: $cmd not installed" + exit 1 + fi +} + +require_command jq +require_command $MZ
if [[ ! -v NUM_NETIFS ]]; then echo "SKIP: importer does not define "NUM_NETIFS""
Add team_create() and team_destroy() to manage team netdevices.
Signed-off-by: Petr Machata petrm@mellanox.com --- tools/testing/selftests/net/forwarding/lib.sh | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)
diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh index 81e36157bf16..3a4eba4f0d08 100644 --- a/tools/testing/selftests/net/forwarding/lib.sh +++ b/tools/testing/selftests/net/forwarding/lib.sh @@ -8,6 +8,7 @@ PING=${PING:=ping} PING6=${PING6:=ping6} MZ=${MZ:=mausezahn} +TEAMD=${TEAMD:=teamd} WAIT_TIME=${WAIT_TIME:=5} PAUSE_ON_FAIL=${PAUSE_ON_FAIL:=no} PAUSE_ON_CLEANUP=${PAUSE_ON_CLEANUP:=no} @@ -425,6 +426,28 @@ vlan_destroy() ip link del dev $name }
+team_create() +{ + local if_name=$1; shift + local mode=$1; shift + + require_command $TEAMD + $TEAMD -t $if_name -d -c '{"runner": {"name": "'$mode'"}}' + for slave in "$@"; do + ip link set dev $slave down + ip link set dev $slave master $if_name + ip link set dev $slave up + done + ip link set dev $if_name up +} + +team_destroy() +{ + local if_name=$1; shift + + $TEAMD -t $if_name -k +} + master_name_get() { local if_name=$1
Instead of relying on "arping" being installed everywhere under that name, introduce a variable $ARPING like the other tools do.
Convert an existing test, mirror_gre_vlan_bridge_1q.sh to require_command $ARPING and then invoke arping through the variable.
Signed-off-by: Petr Machata petrm@mellanox.com --- tools/testing/selftests/net/forwarding/lib.sh | 1 + tools/testing/selftests/net/forwarding/mirror_gre_vlan_bridge_1q.sh | 6 ++++-- 2 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh index 3a4eba4f0d08..843a6715924f 100644 --- a/tools/testing/selftests/net/forwarding/lib.sh +++ b/tools/testing/selftests/net/forwarding/lib.sh @@ -8,6 +8,7 @@ PING=${PING:=ping} PING6=${PING6:=ping6} MZ=${MZ:=mausezahn} +ARPING=${ARPING:=arping} TEAMD=${TEAMD:=teamd} WAIT_TIME=${WAIT_TIME:=5} PAUSE_ON_FAIL=${PAUSE_ON_FAIL:=no} diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_vlan_bridge_1q.sh b/tools/testing/selftests/net/forwarding/mirror_gre_vlan_bridge_1q.sh index d3e75bb6a2d8..204b25f13934 100755 --- a/tools/testing/selftests/net/forwarding/mirror_gre_vlan_bridge_1q.sh +++ b/tools/testing/selftests/net/forwarding/mirror_gre_vlan_bridge_1q.sh @@ -28,6 +28,8 @@ source mirror_lib.sh source mirror_gre_lib.sh source mirror_gre_topo_lib.sh
+require_command $ARPING + setup_prepare() { h1=${NETIFS[p1]} @@ -149,7 +151,7 @@ test_span_gre_forbidden_egress()
bridge vlan add dev $swp3 vid 555 # Re-prime FDB - arping -I br1.555 192.0.2.130 -fqc 1 + $ARPING -I br1.555 192.0.2.130 -fqc 1 sleep 1 quick_test_span_gre_dir $tundev ingress
@@ -223,7 +225,7 @@ test_span_gre_fdb_roaming()
bridge fdb del dev $swp2 $h3mac vlan 555 master # Re-prime FDB - arping -I br1.555 192.0.2.130 -fqc 1 + $ARPING -I br1.555 192.0.2.130 -fqc 1 sleep 1 quick_test_span_gre_dir $tundev ingress
Test for "tc action mirred egress mirror" that mirrors to gretap when the underlay route points at a VLAN-aware bridge (802.1q), and the traffic egresses the bridge through a team device. Test upping and downing individual team device slaves and verify the traffic flows as expected.
Signed-off-by: Petr Machata petrm@mellanox.com --- .../net/forwarding/mirror_gre_bridge_1q_lag.sh | 283 +++++++++++++++++++++ 1 file changed, 283 insertions(+) create mode 100755 tools/testing/selftests/net/forwarding/mirror_gre_bridge_1q_lag.sh
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1q_lag.sh b/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1q_lag.sh new file mode 100755 index 000000000000..61844caf671e --- /dev/null +++ b/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1q_lag.sh @@ -0,0 +1,283 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Test for "tc action mirred egress mirror" when the underlay route points at a +# bridge device with vlan filtering (802.1q), and the egress device is a team +# device. +# +# +----------------------+ +----------------------+ +# | H1 | | H2 | +# | + $h1.333 | | $h1.555 + | +# | | 192.0.2.1/28 | | 192.0.2.18/28 | | +# +-----|----------------+ +----------------|-----+ +# | $h1 | +# +--------------------------------+------------------------------+ +# | +# +--------------------------------------|------------------------------------+ +# | SW o---> mirror | +# | | | +# | +--------------------------------+------------------------------+ | +# | | $swp1 | | +# | + $swp1.333 $swp1.555 + | +# | 192.0.2.2/28 192.0.2.17/28 | +# | | +# | +-----------------------------------------------------------------------+ | +# | | BR1 (802.1q) | | +# | | + lag (team) 192.0.2.129/28 | | +# | | / \ 2001:db8:2::1/64 | | +# | +---/------------------------------------------------------------------+ | +# | / \ ^ | +# | | \ + gt4 (gretap) | | +# | | \ loc=192.0.2.129 | | +# | | \ rem=192.0.2.130 -+ | +# | | \ ttl=100 | +# | | \ tos=inherit | +# | | \ | +# | | _________________________________ | +# | | \ | +# | + $swp3 + $swp4 | +# +---|------------------------------------------------|----------------------+ +# | | +# +---|----------------------+ +---|----------------------+ +# | + $h3 H3 | | + $h4 H4 | +# | 192.0.2.130/28 | | 192.0.2.130/28 | +# | 2001:db8:2::2/64 | | 2001:db8:2::2/64 | +# +--------------------------+ +--------------------------+ + +ALL_TESTS=" + test_mirror_gretap_first + test_mirror_gretap_second +" + +NUM_NETIFS=6 +source lib.sh +source mirror_lib.sh +source mirror_gre_lib.sh + +require_command $ARPING + +vlan_host_create() +{ + local if_name=$1; shift + local vid=$1; shift + local vrf_name=$1; shift + local ips=("${@}") + + vrf_create $vrf_name + ip link set dev $vrf_name up + vlan_create $if_name $vid $vrf_name "${ips[@]}" +} + +vlan_host_destroy() +{ + local if_name=$1; shift + local vid=$1; shift + local vrf_name=$1; shift + + vlan_destroy $if_name $vid + ip link set dev $vrf_name down + vrf_destroy $vrf_name +} + +h1_create() +{ + vlan_host_create $h1 333 vrf-h1 192.0.2.1/28 + ip -4 route add 192.0.2.16/28 vrf vrf-h1 nexthop via 192.0.2.2 +} + +h1_destroy() +{ + ip -4 route del 192.0.2.16/28 vrf vrf-h1 + vlan_host_destroy $h1 333 vrf-h1 +} + +h2_create() +{ + vlan_host_create $h1 555 vrf-h2 192.0.2.18/28 + ip -4 route add 192.0.2.0/28 vrf vrf-h2 nexthop via 192.0.2.17 +} + +h2_destroy() +{ + ip -4 route del 192.0.2.0/28 vrf vrf-h2 + vlan_host_destroy $h1 555 vrf-h2 +} + +h3_create() +{ + simple_if_init $h3 192.0.2.130/28 + tc qdisc add dev $h3 clsact +} + +h3_destroy() +{ + tc qdisc del dev $h3 clsact + simple_if_fini $h3 192.0.2.130/28 +} + +h4_create() +{ + simple_if_init $h4 192.0.2.130/28 + tc qdisc add dev $h4 clsact +} + +h4_destroy() +{ + tc qdisc del dev $h4 clsact + simple_if_fini $h4 192.0.2.130/28 +} + +switch_create() +{ + ip link set dev $swp1 up + tc qdisc add dev $swp1 clsact + vlan_create $swp1 333 "" 192.0.2.2/28 + vlan_create $swp1 555 "" 192.0.2.17/28 + + tunnel_create gt4 gretap 192.0.2.129 192.0.2.130 \ + ttl 100 tos inherit + + ip link set dev $swp3 up + ip link set dev $swp4 up + + ip link add name br1 type bridge vlan_filtering 1 + ip link set dev br1 up + __addr_add_del br1 add 192.0.2.129/32 + ip -4 route add 192.0.2.130/32 dev br1 + + team_create lag loadbalance $swp3 $swp4 + ip link set dev lag master br1 +} + +switch_destroy() +{ + ip link set dev lag nomaster + team_destroy lag + + ip -4 route del 192.0.2.130/32 dev br1 + __addr_add_del br1 del 192.0.2.129/32 + ip link set dev br1 down + ip link del dev br1 + + ip link set dev $swp4 down + ip link set dev $swp3 down + + tunnel_destroy gt4 + + vlan_destroy $swp1 555 + vlan_destroy $swp1 333 + tc qdisc del dev $swp1 clsact + ip link set dev $swp1 down +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp3=${NETIFS[p3]} + h3=${NETIFS[p4]} + + swp4=${NETIFS[p5]} + h4=${NETIFS[p6]} + + vrf_prepare + + ip link set dev $h1 up + h1_create + h2_create + h3_create + h4_create + switch_create + + trap_install $h3 ingress + trap_install $h4 ingress +} + +cleanup() +{ + pre_cleanup + + trap_uninstall $h4 ingress + trap_uninstall $h3 ingress + + switch_destroy + h4_destroy + h3_destroy + h2_destroy + h1_destroy + ip link set dev $h1 down + + vrf_cleanup +} + +test_lag_slave() +{ + local host_dev=$1; shift + local up_dev=$1; shift + local down_dev=$1; shift + local what=$1; shift + + RET=0 + + mirror_install $swp1 ingress gt4 \ + "proto 802.1q flower vlan_id 333 $tcflags" + + # Test connectivity through $up_dev when $down_dev is set down. + ip link set dev $down_dev down + setup_wait_dev $up_dev + setup_wait_dev $host_dev + $ARPING -I br1 192.0.2.130 -qfc 1 + sleep 2 + mirror_test vrf-h1 192.0.2.1 192.0.2.18 $host_dev 1 10 + + # Test lack of connectivity when both slaves are down. + ip link set dev $up_dev down + sleep 2 + mirror_test vrf-h1 192.0.2.1 192.0.2.18 $h3 1 0 + mirror_test vrf-h1 192.0.2.1 192.0.2.18 $h4 1 0 + + ip link set dev $up_dev up + ip link set dev $down_dev up + mirror_uninstall $swp1 ingress + + log_test "$what ($tcflags)" +} + +test_mirror_gretap_first() +{ + test_lag_slave $h3 $swp3 $swp4 "mirror to gretap: LAG first slave" +} + +test_mirror_gretap_second() +{ + test_lag_slave $h4 $swp4 $swp3 "mirror to gretap: LAG second slave" +} + +test_all() +{ + slow_path_trap_install $swp1 ingress + slow_path_trap_install $swp1 egress + + tests_run + + slow_path_trap_uninstall $swp1 egress + slow_path_trap_uninstall $swp1 ingress +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tcflags="skip_hw" +test_all + +if ! tc_offload_check; then + echo "WARN: Could not test offloaded functionality" +else + tcflags="skip_sw" + test_all +fi + +exit $EXIT_STATUS
This tests mirror-to-gretap when an underlay packet path includes a team device which is not in loadbalance mode, but in LACP mode. The test manipulates LAG membership to achieve changes in txability, thus making sure that a driver that offloads mirror-to-gretap doesn't just consider upness of a device.
Signed-off-by: Petr Machata petrm@mellanox.com --- .../net/forwarding/mirror_gre_lag_lacp.sh | 285 +++++++++++++++++++++ 1 file changed, 285 insertions(+) create mode 100755 tools/testing/selftests/net/forwarding/mirror_gre_lag_lacp.sh
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_lag_lacp.sh b/tools/testing/selftests/net/forwarding/mirror_gre_lag_lacp.sh new file mode 100755 index 000000000000..9edf4cb104a8 --- /dev/null +++ b/tools/testing/selftests/net/forwarding/mirror_gre_lag_lacp.sh @@ -0,0 +1,285 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Test for "tc action mirred egress mirror" when the underlay route points at a +# team device. +# +# +----------------------+ +----------------------+ +# | H1 | | H2 | +# | + $h1.333 | | $h1.555 + | +# | | 192.0.2.1/28 | | 192.0.2.18/28 | | +# +----|-----------------+ +----------------|-----+ +# | $h1 | +# +---------------------------------+------------------------------+ +# | +# +--------------------------------------|------------------------------------+ +# | SW o---> mirror | +# | | | +# | +----------------------------------+------------------------------+ | +# | | $swp1 | | +# | + $swp1.333 $swp1.555 + | +# | 192.0.2.2/28 192.0.2.17/28 | +# | | +# | | +# | + gt4 (gretap) ,-> + lag1 (team) | +# | loc=192.0.2.129 | | 192.0.2.129/28 | +# | rem=192.0.2.130 --' | | +# | ttl=100 | | +# | tos=inherit | | +# | _____________________|______________________ | +# | / \ | +# | / \ | +# | + $swp3 + $swp4 | +# +---|------------------------------------------------|----------------------+ +# | | +# +---|------------------------------------------------|----------------------+ +# | + $h3 + $h4 H3 | +# | \ / | +# | ____________________________________________/ | +# | | | +# | + lag2 (team) | +# | 192.0.2.130/28 | +# | | +# +---------------------------------------------------------------------------+ + +ALL_TESTS=" + test_mirror_gretap_first + test_mirror_gretap_second +" + +NUM_NETIFS=6 +source lib.sh +source mirror_lib.sh +source mirror_gre_lib.sh + +require_command $ARPING + +vlan_host_create() +{ + local if_name=$1; shift + local vid=$1; shift + local vrf_name=$1; shift + local ips=("${@}") + + vrf_create $vrf_name + ip link set dev $vrf_name up + vlan_create $if_name $vid $vrf_name "${ips[@]}" +} + +vlan_host_destroy() +{ + local if_name=$1; shift + local vid=$1; shift + local vrf_name=$1; shift + + vlan_destroy $if_name $vid + ip link set dev $vrf_name down + vrf_destroy $vrf_name +} + +h1_create() +{ + vlan_host_create $h1 333 vrf-h1 192.0.2.1/28 + ip -4 route add 192.0.2.16/28 vrf vrf-h1 nexthop via 192.0.2.2 +} + +h1_destroy() +{ + ip -4 route del 192.0.2.16/28 vrf vrf-h1 + vlan_host_destroy $h1 333 vrf-h1 +} + +h2_create() +{ + vlan_host_create $h1 555 vrf-h2 192.0.2.18/28 + ip -4 route add 192.0.2.0/28 vrf vrf-h2 nexthop via 192.0.2.17 +} + +h2_destroy() +{ + ip -4 route del 192.0.2.0/28 vrf vrf-h2 + vlan_host_destroy $h1 555 vrf-h2 +} + +h3_create_team() +{ + team_create lag2 lacp $h3 $h4 + __simple_if_init lag2 vrf-h3 192.0.2.130/32 + ip -4 route add vrf vrf-h3 192.0.2.129/32 dev lag2 +} + +h3_destroy_team() +{ + ip -4 route del vrf vrf-h3 192.0.2.129/32 dev lag2 + __simple_if_fini lag2 192.0.2.130/32 + team_destroy lag2 + + ip link set dev $h3 down + ip link set dev $h4 down +} + +h3_create() +{ + vrf_create vrf-h3 + ip link set dev vrf-h3 up + tc qdisc add dev $h3 clsact + tc qdisc add dev $h4 clsact + h3_create_team +} + +h3_destroy() +{ + h3_destroy_team + tc qdisc del dev $h4 clsact + tc qdisc del dev $h3 clsact + ip link set dev vrf-h3 down + vrf_destroy vrf-h3 +} + +switch_create() +{ + ip link set dev $swp1 up + tc qdisc add dev $swp1 clsact + vlan_create $swp1 333 "" 192.0.2.2/28 + vlan_create $swp1 555 "" 192.0.2.17/28 + + tunnel_create gt4 gretap 192.0.2.129 192.0.2.130 \ + ttl 100 tos inherit + + ip link set dev $swp3 up + ip link set dev $swp4 up + team_create lag1 lacp $swp3 $swp4 + __addr_add_del lag1 add 192.0.2.129/32 + ip -4 route add 192.0.2.130/32 dev lag1 +} + +switch_destroy() +{ + ip -4 route del 192.0.2.130/32 dev lag1 + __addr_add_del lag1 del 192.0.2.129/32 + team_destroy lag1 + + ip link set dev $swp4 down + ip link set dev $swp3 down + + tunnel_destroy gt4 + + vlan_destroy $swp1 555 + vlan_destroy $swp1 333 + tc qdisc del dev $swp1 clsact + ip link set dev $swp1 down +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp3=${NETIFS[p3]} + h3=${NETIFS[p4]} + + swp4=${NETIFS[p5]} + h4=${NETIFS[p6]} + + vrf_prepare + + ip link set dev $h1 up + h1_create + h2_create + h3_create + switch_create + + trap_install $h3 ingress + trap_install $h4 ingress +} + +cleanup() +{ + pre_cleanup + + trap_uninstall $h4 ingress + trap_uninstall $h3 ingress + + switch_destroy + h3_destroy + h2_destroy + h1_destroy + ip link set dev $h1 down + + vrf_cleanup +} + +test_lag_slave() +{ + local up_dev=$1; shift + local down_dev=$1; shift + local what=$1; shift + + RET=0 + + mirror_install $swp1 ingress gt4 \ + "proto 802.1q flower vlan_id 333 $tcflags" + + # Move $down_dev away from the team. That will prompt change in + # txability of the connected device, without changing its upness. The + # driver should notice the txability change and move the traffic to the + # other slave. + ip link set dev $down_dev nomaster + sleep 2 + mirror_test vrf-h1 192.0.2.1 192.0.2.18 $up_dev 1 10 + + # Test lack of connectivity when neither slave is txable. + ip link set dev $up_dev nomaster + sleep 2 + mirror_test vrf-h1 192.0.2.1 192.0.2.18 $h3 1 0 + mirror_test vrf-h1 192.0.2.1 192.0.2.18 $h4 1 0 + mirror_uninstall $swp1 ingress + + # Recreate H3's team device, because mlxsw, which this test is + # predominantly mean to test, requires a bottom-up construction and + # doesn't allow enslavement to a device that already has an upper. + h3_destroy_team + h3_create_team + # Wait for ${h,swp}{3,4}. + setup_wait + + log_test "$what ($tcflags)" +} + +test_mirror_gretap_first() +{ + test_lag_slave $h3 $h4 "mirror to gretap: LAG first slave" +} + +test_mirror_gretap_second() +{ + test_lag_slave $h4 $h3 "mirror to gretap: LAG second slave" +} + +test_all() +{ + slow_path_trap_install $swp1 ingress + slow_path_trap_install $swp1 egress + + tests_run + + slow_path_trap_uninstall $swp1 egress + slow_path_trap_uninstall $swp1 ingress +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tcflags="skip_hw" +test_all + +if ! tc_offload_check; then + echo "WARN: Could not test offloaded functionality" +else + tcflags="skip_sw" + test_all +fi + +exit $EXIT_STATUS
From: Petr Machata petrm@mellanox.com Date: Mon, 30 Jul 2018 16:37:17 +0200
This patchset adds a test for "tc action mirred mirror" where the mirrored-to device is a gretap, and underlay path contains a team device.
In patch #1 require_command() is added, which should henceforth be used to declare dependence on a certain tool.
In patch #2, two new functions, team_create() and team_destroy(), are added to lib.sh.
The newly-added test uses arping, which isn't necessarily available. Therefore patch #3 introduces $ARPING, and a preexisting test is fixed to require_command $ARPING.
In patches #4 and #5, two new tests are added. In both cases, a team device is on egress path of a mirrored packet in a mirror-to-gretap scenario. In the first one, the team device is in loadbalance mode, in the second one it's in lacp mode. (The difference in modes necessitates a different testing strategy, hence two test cases instead of just parameterizing one.)
I always like seeing new test cases. :)
Series applied, thanks. -- To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
linux-kselftest-mirror@lists.linaro.org
-
David Miller -
Petr Machata