Following the build fixes for bpftool [1], here are a few fixes for cross-building the sefltests out of tree. This will enable wider automated testing on various Arm hardware.
[1] https://lore.kernel.org/bpf/20201110164310.2600671-1-jean-philippe@linaro.or...
Jean-Philippe Brucker (5): selftests/bpf: Enable cross-building selftests/bpf: Fix out-of-tree build selftests/bpf: Move generated test files to $(TEST_GEN_FILES) selftests/bpf: Fix installation of urandom_read selftests/bpf: Install btf_dump test cases
tools/testing/selftests/bpf/Makefile | 61 +++++++++++++++++++++------- 1 file changed, 46 insertions(+), 15 deletions(-)
Build bpftool and resolve_btfids using the host toolchain when cross-compiling, since they are executed during build to generate the selftests. Add a host build directory in order to build both host and target version of libbpf. Build host tools using $(HOSTCC) defined in Makefile.include.
Signed-off-by: Jean-Philippe Brucker jean-philippe@linaro.org --- tools/testing/selftests/bpf/Makefile | 43 ++++++++++++++++++++++------ 1 file changed, 34 insertions(+), 9 deletions(-)
diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile index c51df6b91bef..1d85565883ea 100644 --- a/tools/testing/selftests/bpf/Makefile +++ b/tools/testing/selftests/bpf/Makefile @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 include ../../../../scripts/Kbuild.include include ../../../scripts/Makefile.arch +include ../../../scripts/Makefile.include
CXX ?= $(CROSS_COMPILE)g++
@@ -113,7 +114,20 @@ SCRATCH_DIR := $(OUTPUT)/tools BUILD_DIR := $(SCRATCH_DIR)/build INCLUDE_DIR := $(SCRATCH_DIR)/include BPFOBJ := $(BUILD_DIR)/libbpf/libbpf.a -RESOLVE_BTFIDS := $(BUILD_DIR)/resolve_btfids/resolve_btfids +ifneq ($(CROSS_COMPILE),) +HOST_BUILD_DIR := $(BUILD_DIR)/host +HOST_SCRATCH_DIR := $(OUTPUT)/host-tools +else +HOST_BUILD_DIR := $(BUILD_DIR) +HOST_SCRATCH_DIR := $(SCRATCH_DIR) +endif +HOST_BPFOBJ := $(HOST_BUILD_DIR)/libbpf/libbpf.a +RESOLVE_BTFIDS := $(HOST_BUILD_DIR)/resolve_btfids/resolve_btfids + +# sort removes libbpf duplicates when not cross-building +MAKE_DIRS := $(sort $(BUILD_DIR)/libbpf $(HOST_BUILD_DIR)/libbpf \ + $(HOST_BUILD_DIR)/bpftool $(HOST_BUILD_DIR)/resolve_btfids \ + $(INCLUDE_DIR))
VMLINUX_BTF_PATHS ?= $(if $(O),$(O)/vmlinux) \ $(if $(KBUILD_OUTPUT),$(KBUILD_OUTPUT)/vmlinux) \ @@ -157,7 +171,7 @@ $(OUTPUT)/test_stub.o: test_stub.c $(BPFOBJ) $(call msg,CC,,$@) $(Q)$(CC) -c $(CFLAGS) -o $@ $<
-DEFAULT_BPFTOOL := $(SCRATCH_DIR)/sbin/bpftool +DEFAULT_BPFTOOL := $(HOST_SCRATCH_DIR)/sbin/bpftool
$(OUTPUT)/runqslower: $(BPFOBJ) | $(DEFAULT_BPFTOOL) $(Q)$(MAKE) $(submake_extras) -C $(TOOLSDIR)/bpf/runqslower \ @@ -182,10 +196,11 @@ $(OUTPUT)/test_sysctl: cgroup_helpers.c
BPFTOOL ?= $(DEFAULT_BPFTOOL) $(DEFAULT_BPFTOOL): $(wildcard $(BPFTOOLDIR)/*.[ch] $(BPFTOOLDIR)/Makefile) \ - $(BPFOBJ) | $(BUILD_DIR)/bpftool + $(HOST_BPFOBJ) | $(HOST_BUILD_DIR)/bpftool $(Q)$(MAKE) $(submake_extras) -C $(BPFTOOLDIR) \ - OUTPUT=$(BUILD_DIR)/bpftool/ \ - prefix= DESTDIR=$(SCRATCH_DIR)/ install + CC=$(HOSTCC) LD=$(HOSTLD) \ + OUTPUT=$(HOST_BUILD_DIR)/bpftool/ \ + prefix= DESTDIR=$(HOST_SCRATCH_DIR)/ install $(Q)mkdir -p $(BUILD_DIR)/bpftool/Documentation $(Q)RST2MAN_OPTS="--exit-status=1" $(MAKE) $(submake_extras) \ -C $(BPFTOOLDIR)/Documentation \ @@ -198,7 +213,16 @@ $(BPFOBJ): $(wildcard $(BPFDIR)/*.[ch] $(BPFDIR)/Makefile) \ $(Q)$(MAKE) $(submake_extras) -C $(BPFDIR) OUTPUT=$(BUILD_DIR)/libbpf/ \ DESTDIR=$(SCRATCH_DIR) prefix= all install_headers
-$(BUILD_DIR)/libbpf $(BUILD_DIR)/bpftool $(BUILD_DIR)/resolve_btfids $(INCLUDE_DIR): +ifneq ($(BPFOBJ),$(HOST_BPFOBJ)) +$(HOST_BPFOBJ): $(wildcard $(BPFDIR)/*.[ch] $(BPFDIR)/Makefile) \ + ../../../include/uapi/linux/bpf.h \ + | $(INCLUDE_DIR) $(HOST_BUILD_DIR)/libbpf + $(Q)$(MAKE) $(submake_extras) -C $(BPFDIR) \ + OUTPUT=$(HOST_BUILD_DIR)/libbpf/ CC=$(HOSTCC) LD=$(HOSTLD) \ + DESTDIR=$(HOST_SCRATCH_DIR)/ prefix= all install_headers +endif + +$(MAKE_DIRS): $(call msg,MKDIR,,$@) $(Q)mkdir -p $@
@@ -211,7 +235,7 @@ else $(Q)cp "$(VMLINUX_H)" $@ endif
-$(RESOLVE_BTFIDS): $(BPFOBJ) | $(BUILD_DIR)/resolve_btfids \ +$(RESOLVE_BTFIDS): $(HOST_BPFOBJ) | $(HOST_BUILD_DIR)/resolve_btfids \ $(TOOLSDIR)/bpf/resolve_btfids/main.c \ $(TOOLSDIR)/lib/rbtree.c \ $(TOOLSDIR)/lib/zalloc.c \ @@ -219,7 +243,8 @@ $(RESOLVE_BTFIDS): $(BPFOBJ) | $(BUILD_DIR)/resolve_btfids \ $(TOOLSDIR)/lib/ctype.c \ $(TOOLSDIR)/lib/str_error_r.c $(Q)$(MAKE) $(submake_extras) -C $(TOOLSDIR)/bpf/resolve_btfids \ - OUTPUT=$(BUILD_DIR)/resolve_btfids/ BPFOBJ=$(BPFOBJ) + CC=$(HOSTCC) LD=$(HOSTLD) AR=$(HOSTAR) \ + OUTPUT=$(HOST_BUILD_DIR)/resolve_btfids/ BPFOBJ=$(HOST_BPFOBJ)
# Get Clang's default includes on this system, as opposed to those seen by # '-target bpf'. This fixes "missing" files on some architectures/distros, @@ -450,7 +475,7 @@ $(OUTPUT)/bench: $(OUTPUT)/bench.o $(OUTPUT)/testing_helpers.o \ $(call msg,BINARY,,$@) $(Q)$(CC) $(LDFLAGS) -o $@ $(filter %.a %.o,$^) $(LDLIBS)
-EXTRA_CLEAN := $(TEST_CUSTOM_PROGS) $(SCRATCH_DIR) \ +EXTRA_CLEAN := $(TEST_CUSTOM_PROGS) $(SCRATCH_DIR) $(HOST_SCRATCH_DIR) \ prog_tests/tests.h map_tests/tests.h verifier/tests.h \ feature \ $(addprefix $(OUTPUT)/,*.o *.skel.h no_alu32 bpf_gcc bpf_testmod.ko)
On Tue, Jan 12, 2021 at 6:01 AM Jean-Philippe Brucker jean-philippe@linaro.org wrote:
Build bpftool and resolve_btfids using the host toolchain when cross-compiling, since they are executed during build to generate the selftests. Add a host build directory in order to build both host and target version of libbpf. Build host tools using $(HOSTCC) defined in Makefile.include.
Signed-off-by: Jean-Philippe Brucker jean-philippe@linaro.org
Makes sense.
Acked-by: Andrii Nakryiko andrii@kernel.org
tools/testing/selftests/bpf/Makefile | 43 ++++++++++++++++++++++------ 1 file changed, 34 insertions(+), 9 deletions(-)
diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile index c51df6b91bef..1d85565883ea 100644 --- a/tools/testing/selftests/bpf/Makefile +++ b/tools/testing/selftests/bpf/Makefile @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 include ../../../../scripts/Kbuild.include include ../../../scripts/Makefile.arch +include ../../../scripts/Makefile.include
CXX ?= $(CROSS_COMPILE)g++
@@ -113,7 +114,20 @@ SCRATCH_DIR := $(OUTPUT)/tools BUILD_DIR := $(SCRATCH_DIR)/build INCLUDE_DIR := $(SCRATCH_DIR)/include BPFOBJ := $(BUILD_DIR)/libbpf/libbpf.a -RESOLVE_BTFIDS := $(BUILD_DIR)/resolve_btfids/resolve_btfids +ifneq ($(CROSS_COMPILE),) +HOST_BUILD_DIR := $(BUILD_DIR)/host +HOST_SCRATCH_DIR := $(OUTPUT)/host-tools +else +HOST_BUILD_DIR := $(BUILD_DIR) +HOST_SCRATCH_DIR := $(SCRATCH_DIR) +endif +HOST_BPFOBJ := $(HOST_BUILD_DIR)/libbpf/libbpf.a +RESOLVE_BTFIDS := $(HOST_BUILD_DIR)/resolve_btfids/resolve_btfids
+# sort removes libbpf duplicates when not cross-building +MAKE_DIRS := $(sort $(BUILD_DIR)/libbpf $(HOST_BUILD_DIR)/libbpf \
$(HOST_BUILD_DIR)/bpftool $(HOST_BUILD_DIR)/resolve_btfids \$(INCLUDE_DIR))VMLINUX_BTF_PATHS ?= $(if $(O),$(O)/vmlinux) \ $(if $(KBUILD_OUTPUT),$(KBUILD_OUTPUT)/vmlinux) \ @@ -157,7 +171,7 @@ $(OUTPUT)/test_stub.o: test_stub.c $(BPFOBJ) $(call msg,CC,,$@) $(Q)$(CC) -c $(CFLAGS) -o $@ $<
-DEFAULT_BPFTOOL := $(SCRATCH_DIR)/sbin/bpftool +DEFAULT_BPFTOOL := $(HOST_SCRATCH_DIR)/sbin/bpftool
$(OUTPUT)/runqslower: $(BPFOBJ) | $(DEFAULT_BPFTOOL) $(Q)$(MAKE) $(submake_extras) -C $(TOOLSDIR)/bpf/runqslower \ @@ -182,10 +196,11 @@ $(OUTPUT)/test_sysctl: cgroup_helpers.c
BPFTOOL ?= $(DEFAULT_BPFTOOL) $(DEFAULT_BPFTOOL): $(wildcard $(BPFTOOLDIR)/*.[ch] $(BPFTOOLDIR)/Makefile) \
$(BPFOBJ) | $(BUILD_DIR)/bpftool
$(HOST_BPFOBJ) | $(HOST_BUILD_DIR)/bpftool $(Q)$(MAKE) $(submake_extras) -C $(BPFTOOLDIR) \
OUTPUT=$(BUILD_DIR)/bpftool/ \prefix= DESTDIR=$(SCRATCH_DIR)/ install
CC=$(HOSTCC) LD=$(HOSTLD) \OUTPUT=$(HOST_BUILD_DIR)/bpftool/ \prefix= DESTDIR=$(HOST_SCRATCH_DIR)/ install $(Q)mkdir -p $(BUILD_DIR)/bpftool/Documentation $(Q)RST2MAN_OPTS="--exit-status=1" $(MAKE) $(submake_extras) \ -C $(BPFTOOLDIR)/Documentation \@@ -198,7 +213,16 @@ $(BPFOBJ): $(wildcard $(BPFDIR)/*.[ch] $(BPFDIR)/Makefile) \ $(Q)$(MAKE) $(submake_extras) -C $(BPFDIR) OUTPUT=$(BUILD_DIR)/libbpf/ \ DESTDIR=$(SCRATCH_DIR) prefix= all install_headers
-$(BUILD_DIR)/libbpf $(BUILD_DIR)/bpftool $(BUILD_DIR)/resolve_btfids $(INCLUDE_DIR): +ifneq ($(BPFOBJ),$(HOST_BPFOBJ)) +$(HOST_BPFOBJ): $(wildcard $(BPFDIR)/*.[ch] $(BPFDIR)/Makefile) \
../../../include/uapi/linux/bpf.h \| $(INCLUDE_DIR) $(HOST_BUILD_DIR)/libbpf$(Q)$(MAKE) $(submake_extras) -C $(BPFDIR) \OUTPUT=$(HOST_BUILD_DIR)/libbpf/ CC=$(HOSTCC) LD=$(HOSTLD) \DESTDIR=$(HOST_SCRATCH_DIR)/ prefix= all install_headers+endif
+$(MAKE_DIRS): $(call msg,MKDIR,,$@) $(Q)mkdir -p $@
nit: I'd just put this rule right next to MAKE_DIRS definition
@@ -211,7 +235,7 @@ else $(Q)cp "$(VMLINUX_H)" $@ endif
-$(RESOLVE_BTFIDS): $(BPFOBJ) | $(BUILD_DIR)/resolve_btfids \ +$(RESOLVE_BTFIDS): $(HOST_BPFOBJ) | $(HOST_BUILD_DIR)/resolve_btfids \ $(TOOLSDIR)/bpf/resolve_btfids/main.c \ $(TOOLSDIR)/lib/rbtree.c \ $(TOOLSDIR)/lib/zalloc.c \ @@ -219,7 +243,8 @@ $(RESOLVE_BTFIDS): $(BPFOBJ) | $(BUILD_DIR)/resolve_btfids \ $(TOOLSDIR)/lib/ctype.c \ $(TOOLSDIR)/lib/str_error_r.c $(Q)$(MAKE) $(submake_extras) -C $(TOOLSDIR)/bpf/resolve_btfids \
OUTPUT=$(BUILD_DIR)/resolve_btfids/ BPFOBJ=$(BPFOBJ)
CC=$(HOSTCC) LD=$(HOSTLD) AR=$(HOSTAR) \OUTPUT=$(HOST_BUILD_DIR)/resolve_btfids/ BPFOBJ=$(HOST_BPFOBJ)# Get Clang's default includes on this system, as opposed to those seen by # '-target bpf'. This fixes "missing" files on some architectures/distros, @@ -450,7 +475,7 @@ $(OUTPUT)/bench: $(OUTPUT)/bench.o $(OUTPUT)/testing_helpers.o \ $(call msg,BINARY,,$@) $(Q)$(CC) $(LDFLAGS) -o $@ $(filter %.a %.o,$^) $(LDLIBS)
-EXTRA_CLEAN := $(TEST_CUSTOM_PROGS) $(SCRATCH_DIR) \ +EXTRA_CLEAN := $(TEST_CUSTOM_PROGS) $(SCRATCH_DIR) $(HOST_SCRATCH_DIR) \ prog_tests/tests.h map_tests/tests.h verifier/tests.h \ feature \ $(addprefix $(OUTPUT)/,*.o *.skel.h no_alu32 bpf_gcc bpf_testmod.ko) -- 2.30.0
When building out-of-tree, the .skel.h files are generated into the $(OUTPUT) directory, rather than $(CURDIR). Add $(OUTPUT) to the include paths.
Signed-off-by: Jean-Philippe Brucker jean-philippe@linaro.org --- tools/testing/selftests/bpf/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile index 1d85565883ea..3ff7e79cc497 100644 --- a/tools/testing/selftests/bpf/Makefile +++ b/tools/testing/selftests/bpf/Makefile @@ -25,7 +25,7 @@ BPF_GCC ?= $(shell command -v bpf-gcc;) SAN_CFLAGS ?= CFLAGS += -g -rdynamic -Wall -O2 $(GENFLAGS) $(SAN_CFLAGS) \ -I$(CURDIR) -I$(INCLUDE_DIR) -I$(GENDIR) -I$(LIBDIR) \ - -I$(TOOLSINCDIR) -I$(APIDIR) \ + -I$(TOOLSINCDIR) -I$(APIDIR) -I$(OUTPUT) \ -Dbpf_prog_load=bpf_prog_test_load \ -Dbpf_load_program=bpf_test_load_program LDLIBS += -lcap -lelf -lz -lrt -lpthread
On Tue, Jan 12, 2021 at 6:01 AM Jean-Philippe Brucker jean-philippe@linaro.org wrote:
When building out-of-tree, the .skel.h files are generated into the $(OUTPUT) directory, rather than $(CURDIR). Add $(OUTPUT) to the include paths.
Signed-off-by: Jean-Philippe Brucker jean-philippe@linaro.org
Acked-by: Andrii Nakryiko andrii@kernel.org
tools/testing/selftests/bpf/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile index 1d85565883ea..3ff7e79cc497 100644 --- a/tools/testing/selftests/bpf/Makefile +++ b/tools/testing/selftests/bpf/Makefile @@ -25,7 +25,7 @@ BPF_GCC ?= $(shell command -v bpf-gcc;) SAN_CFLAGS ?= CFLAGS += -g -rdynamic -Wall -O2 $(GENFLAGS) $(SAN_CFLAGS) \ -I$(CURDIR) -I$(INCLUDE_DIR) -I$(GENDIR) -I$(LIBDIR) \
-I$(TOOLSINCDIR) -I$(APIDIR) \
-I$(TOOLSINCDIR) -I$(APIDIR) -I$(OUTPUT) \ -Dbpf_prog_load=bpf_prog_test_load \ -Dbpf_load_program=bpf_test_load_programLDLIBS += -lcap -lelf -lz -lrt -lpthread
2.30.0
During an out-of-tree build, attempting to install the $(TEST_FILES) into the $(OUTPUT) directory fails, because the objects were already generated into $(OUTPUT):
rsync: [sender] link_stat "tools/testing/selftests/bpf/test_lwt_ip_encap.o" failed: No such file or directory (2) rsync: [sender] link_stat "tools/testing/selftests/bpf/test_tc_edt.o" failed: No such file or directory (2)
Use $(TEST_GEN_FILES) instead.
Signed-off-by: Jean-Philippe Brucker jean-philippe@linaro.org --- tools/testing/selftests/bpf/Makefile | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile index 3ff7e79cc497..046848c508d1 100644 --- a/tools/testing/selftests/bpf/Makefile +++ b/tools/testing/selftests/bpf/Makefile @@ -44,10 +44,9 @@ ifneq ($(BPF_GCC),) TEST_GEN_PROGS += test_progs-bpf_gcc endif
-TEST_GEN_FILES = -TEST_FILES = test_lwt_ip_encap.o \ - test_tc_edt.o \ - xsk_prereqs.sh +TEST_GEN_FILES = test_lwt_ip_encap.o \ + test_tc_edt.o +TEST_FILES = xsk_prereqs.sh
# Order correspond to 'make run_tests' order TEST_PROGS := test_kmod.sh \
For out-of-tree builds, $(TEST_CUSTOM_PROGS) require the $(OUTPUT) prefix, otherwise the kselftest lib doesn't know how to install them:
rsync: [sender] link_stat "tools/testing/selftests/bpf/urandom_read" failed: No such file or directory (2)
Signed-off-by: Jean-Philippe Brucker jean-philippe@linaro.org --- tools/testing/selftests/bpf/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile index 046848c508d1..bffb4ad59a3d 100644 --- a/tools/testing/selftests/bpf/Makefile +++ b/tools/testing/selftests/bpf/Makefile @@ -82,7 +82,7 @@ TEST_GEN_PROGS_EXTENDED = test_sock_addr test_skb_cgroup_id_user \ test_lirc_mode2_user xdping test_cpp runqslower bench bpf_testmod.ko \ xdpxceiver
-TEST_CUSTOM_PROGS = urandom_read +TEST_CUSTOM_PROGS = $(OUTPUT)/urandom_read
# Emit succinct information message describing current building step # $1 - generic step name (e.g., CC, LINK, etc);
On Tue, Jan 12, 2021 at 6:01 AM Jean-Philippe Brucker jean-philippe@linaro.org wrote:
For out-of-tree builds, $(TEST_CUSTOM_PROGS) require the $(OUTPUT) prefix, otherwise the kselftest lib doesn't know how to install them:
rsync: [sender] link_stat "tools/testing/selftests/bpf/urandom_read" failed: No such file or directory (2)
Signed-off-by: Jean-Philippe Brucker jean-philippe@linaro.org
Acked-by: Andrii Nakryiko andrii@kernel.org
tools/testing/selftests/bpf/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile index 046848c508d1..bffb4ad59a3d 100644 --- a/tools/testing/selftests/bpf/Makefile +++ b/tools/testing/selftests/bpf/Makefile @@ -82,7 +82,7 @@ TEST_GEN_PROGS_EXTENDED = test_sock_addr test_skb_cgroup_id_user \ test_lirc_mode2_user xdping test_cpp runqslower bench bpf_testmod.ko \ xdpxceiver
-TEST_CUSTOM_PROGS = urandom_read +TEST_CUSTOM_PROGS = $(OUTPUT)/urandom_read
# Emit succinct information message describing current building step
# $1 - generic step name (e.g., CC, LINK, etc);
2.30.0
The btf_dump test cannot access the original source files for comparison when running the selftests out of tree, causing several failures:
awk: btf_dump_test_case_syntax.c: No such file or directory ...
Add those files to $(TEST_FILES) to have "make install" pick them up.
Signed-off-by: Jean-Philippe Brucker jean-philippe@linaro.org --- tools/testing/selftests/bpf/Makefile | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile index bffb4ad59a3d..fb8cddc410c0 100644 --- a/tools/testing/selftests/bpf/Makefile +++ b/tools/testing/selftests/bpf/Makefile @@ -46,7 +46,14 @@ endif
TEST_GEN_FILES = test_lwt_ip_encap.o \ test_tc_edt.o -TEST_FILES = xsk_prereqs.sh +TEST_FILES = xsk_prereqs.sh \ + progs/btf_dump_test_case_syntax.c \ + progs/btf_dump_test_case_ordering.c \ + progs/btf_dump_test_case_padding.c \ + progs/btf_dump_test_case_packing.c \ + progs/btf_dump_test_case_bitfields.c \ + progs/btf_dump_test_case_multidim.c \ + progs/btf_dump_test_case_namespacing.c
# Order correspond to 'make run_tests' order TEST_PROGS := test_kmod.sh \
On Tue, Jan 12, 2021 at 6:01 AM Jean-Philippe Brucker jean-philippe@linaro.org wrote:
The btf_dump test cannot access the original source files for comparison when running the selftests out of tree, causing several failures:
awk: btf_dump_test_case_syntax.c: No such file or directory ...
Add those files to $(TEST_FILES) to have "make install" pick them up.
Signed-off-by: Jean-Philippe Brucker jean-philippe@linaro.org
tools/testing/selftests/bpf/Makefile | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile index bffb4ad59a3d..fb8cddc410c0 100644 --- a/tools/testing/selftests/bpf/Makefile +++ b/tools/testing/selftests/bpf/Makefile @@ -46,7 +46,14 @@ endif
TEST_GEN_FILES = test_lwt_ip_encap.o \ test_tc_edt.o -TEST_FILES = xsk_prereqs.sh +TEST_FILES = xsk_prereqs.sh \
progs/btf_dump_test_case_syntax.c \progs/btf_dump_test_case_ordering.c \progs/btf_dump_test_case_padding.c \progs/btf_dump_test_case_packing.c \progs/btf_dump_test_case_bitfields.c \progs/btf_dump_test_case_multidim.c \progs/btf_dump_test_case_namespacing.c
maybe wildcard(progs/btf_dump_test_case_*) instead? one less thing to remember to update, if we ever add another test case
# Order correspond to 'make run_tests' order TEST_PROGS := test_kmod.sh \ -- 2.30.0
On Tue, Jan 12, 2021 at 12:55:02PM -0800, Andrii Nakryiko wrote:
-TEST_FILES = xsk_prereqs.sh +TEST_FILES = xsk_prereqs.sh \
progs/btf_dump_test_case_syntax.c \progs/btf_dump_test_case_ordering.c \progs/btf_dump_test_case_padding.c \progs/btf_dump_test_case_packing.c \progs/btf_dump_test_case_bitfields.c \progs/btf_dump_test_case_multidim.c \progs/btf_dump_test_case_namespacing.cmaybe wildcard(progs/btf_dump_test_case_*) instead? one less thing to remember to update, if we ever add another test case
Sure, I'll send a v2
Thanks, Jean
linux-kselftest-mirror@lists.linaro.org
-
Andrii Nakryiko -
Jean-Philippe Brucker