November 2024 - Linux-stable-mirror

[PATCH] usb: aspeed-vhub: fix call balance of vhub->clk handling routines

by Vitalii Mordan

If the clock vhub->clk was not enabled in ast_vhub_probe, vhub->clk will contain a non-NULL value leading to the clock being incorrectly disabled later in ast_vhub_remove(). Use the devm_clk_get_enabled helper function to ensure proper call balance for vhub->clk. Found by Linux Verification Center (linuxtesting.org) with Klever. Fixes: 7ecca2a4080c ("usb/gadget: Add driver for Aspeed SoC virtual hub") Cc: stable(a)vger.kernel.org Signed-off-by: Vitalii Mordan <mordan(a)ispras.ru> --- drivers/usb/gadget/udc/aspeed-vhub/core.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) diff --git a/drivers/usb/gadget/udc/aspeed-vhub/core.c b/drivers/usb/gadget/udc/aspeed-vhub/core.c index f60a019bb173..7566594fc447 100644 --- a/drivers/usb/gadget/udc/aspeed-vhub/core.c +++ b/drivers/usb/gadget/udc/aspeed-vhub/core.c @@ -277,9 +277,6 @@ static void ast_vhub_remove(struct platform_device *pdev) VHUB_CTRL_PHY_RESET_DIS, vhub->regs + AST_VHUB_CTRL); - if (vhub->clk) - clk_disable_unprepare(vhub->clk); - spin_unlock_irqrestore(&vhub->lock, flags); if (vhub->ep0_bufs) @@ -337,14 +334,10 @@ static int ast_vhub_probe(struct platform_device *pdev) platform_set_drvdata(pdev, vhub); - vhub->clk = devm_clk_get(&pdev->dev, NULL); + vhub->clk = devm_clk_get_enabled(&pdev->dev, NULL); if (IS_ERR(vhub->clk)) { rc = PTR_ERR(vhub->clk); - goto err; - } - rc = clk_prepare_enable(vhub->clk); - if (rc) { - dev_err(&pdev->dev, "Error couldn't enable clock (%d)\n", rc); + dev_err(&pdev->dev, "Error couldn't get and enable clock (%d)\n", rc); goto err; } -- 2.25.1

7 months

1
0
0 0

[PATCH v2 2/2] btrfs: handle submit_one_sector() error inside extent_writepage_io()

by Qu Wenruo

[BUG] If submit_one_sector() failed inside extent_writepage_io() for sector size < page size cases (e.g. 4K sector size and 64K page size), then we can hit double ordered extent accounting error. This should be very rare, as submit_one_sector() only fails when we failed to grab the extent map, and such extent map should exist inside the memory and have been pinned. [CAUSE] For example we have the following folio layout: 0 4K 32K 48K 60K 64K |//| |//////| |///| Where |///| is the dirty range we need to writeback. The 3 different dirty ranges are submitted for regular COW. Now we hit the following sequence: - submit_one_sector() returned 0 for [0, 4K) - submit_one_sector() returned 0 for [32K, 48K) - submit_one_sector() returned error for [60K, 64K) - btrfs_mark_ordered_io_finished() called for the whole folio This will mark the following ranges as finished: * [0, 4K) * [32K, 48K) Both ranges have their IO already submitted, this cleanup will lead to double accounting. * [60K, 64K) That's the correct cleanup. The only good news is, this error is only theoretical, as the target extent map is always pinned, thus we should directly grab it from memory, other than reading it from the disk. [FIX] Instead of calling btrfs_mark_ordered_io_finished() for the whole folio range, which can touch ranges we should not touch, instead move the error handling inside extent_writepage_io(). So that we can cleanup exact sectors that are ought to be submitted but failed. This provide much more accurate cleanup, avoiding the double accounting. Cc: stable(a)vger.kernel.org # 5.15+ Signed-off-by: Qu Wenruo <wqu(a)suse.com> --- fs/btrfs/extent_io.c | 32 +++++++++++++++++++------------- 1 file changed, 19 insertions(+), 13 deletions(-) diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index d619c4e148be..b74298c2c24f 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -1418,6 +1418,7 @@ static noinline_for_stack int extent_writepage_io(struct btrfs_inode *inode, struct btrfs_fs_info *fs_info = inode->root->fs_info; unsigned long range_bitmap = 0; bool submitted_io = false; + bool error = false; const u64 folio_start = folio_pos(folio); u64 cur; int bit; @@ -1460,11 +1461,21 @@ static noinline_for_stack int extent_writepage_io(struct btrfs_inode *inode, break; } ret = submit_one_sector(inode, folio, cur, bio_ctrl, i_size); - if (ret < 0) - goto out; + if (unlikely(ret < 0)) { + submit_one_bio(bio_ctrl); + /* + * Failed to grab the extent map which should be very rare. + * Since there is no bio submitted to finish the ordered + * extent, we have to manually finish this sector. + */ + btrfs_mark_ordered_io_finished(inode, folio, cur, + fs_info->sectorsize, false); + error = true; + continue; + } submitted_io = true; } -out: + /* * If we didn't submitted any sector (>= i_size), folio dirty get * cleared but PAGECACHE_TAG_DIRTY is not cleared (only cleared @@ -1472,8 +1483,11 @@ static noinline_for_stack int extent_writepage_io(struct btrfs_inode *inode, * * Here we set writeback and clear for the range. If the full folio * is no longer dirty then we clear the PAGECACHE_TAG_DIRTY tag. + * + * If we hit any error, the corresponding sector will still be dirty + * thus no need to clear PAGECACHE_TAG_DIRTY. */ - if (!submitted_io) { + if (!submitted_io && !error) { btrfs_folio_set_writeback(fs_info, folio, start, len); btrfs_folio_clear_writeback(fs_info, folio, start, len); } @@ -1493,7 +1507,6 @@ static int extent_writepage(struct folio *folio, struct btrfs_bio_ctrl *bio_ctrl { struct inode *inode = folio->mapping->host; struct btrfs_fs_info *fs_info = inode_to_fs_info(inode); - const u64 page_start = folio_pos(folio); int ret; size_t pg_offset; loff_t i_size = i_size_read(inode); @@ -1536,10 +1549,6 @@ static int extent_writepage(struct folio *folio, struct btrfs_bio_ctrl *bio_ctrl bio_ctrl->wbc->nr_to_write--; - if (ret) - btrfs_mark_ordered_io_finished(BTRFS_I(inode), folio, - page_start, PAGE_SIZE, !ret); - done: if (ret < 0) mapping_set_error(folio->mapping, ret); @@ -2320,11 +2329,8 @@ void extent_write_locked_range(struct inode *inode, const struct folio *locked_f if (ret == 1) goto next_page; - if (ret) { - btrfs_mark_ordered_io_finished(BTRFS_I(inode), folio, - cur, cur_len, !ret); + if (ret) mapping_set_error(mapping, ret); - } btrfs_folio_end_lock(fs_info, folio, cur, cur_len); if (ret < 0) found_error = true; -- 2.47.0

7 months

1
0
0 0

[PATCH v2 1/2] btrfs: fix double accounting race in extent_writepage()

by Qu Wenruo

[BUG] There are several double accounting case, where the WARN_ON_ONCE() is triggered inside can_finish_ordered_extent(). And all such cases points back to the btrfs_mark_ordered_io_finished() call inside extent_writepage() when it hits some error. [CAUSE] With extra debug patches to show where the error is from, it turns out to be btrfs_run_delalloc_range() can fail with -ENOSPC. Such failure itself is already a symptom of some bad data/metadata space reservation, but here we need to focus on the error handling part. For example, we have the following dirty page layout (4K sector size and 4K page size): 0 16K 32K |/////|/////|/////|/////|/////|/////|/////|/////| Where the range [0, 32K) is dirty and we need to write all the 8 pages back. When handling the first page 0, we go the following sequence: - btrfs_run_delalloc_range() for range [0, 32k) We enter cow_file_range() for [0, 32K) - btrfs_reserve_extent() only returned a 16K data extent. This can be caused by fragmentation, and it's already an indication we're almost running of space. Now we have the following layout: 0 16K 32K |<----- Reserved ------>|/////|/////|/////|/////| The range [0, 16K) has ordered extent allocated. - btrfs_reserve_extent() returned -ENOSPC We really run out of space. But since we have reserved space for range [0, 16K) we need to clean them up. But that cleanup for ordered extent only happens inside btrfs_run_delalloc_range(). - btrfs_run_delalloc_range() cleanup the reserved ordered extent By calling btrfs_mark_ordered_io_finished() for range [0, 32K). It will locate the ordered extent [0, 16K) and mark it as IOERR. Also since the ordered extent is only 16K, we're finishing the whole ordered extent. Thus we call btrfs_queue_ordered_fn() to queue to finish the ordered extent. But still, the ordered extent [0, 16K) is still in the btrfs_inode::ordered_tree. - extent_writepage() cleanup the ordered extent inside the folio We call btrfs_mark_ordered_io_finished() for range [0, 4K). Since the finished ordered extent [0, 16K) is not yet removed (racy, depends on when btrfs_finish_one_ordered() is called), if btrfs_mark_ordered_io_finished() is called before btrfs_finish_one_ordered(), we will double account and trigger the warning inside can_finish_ordered_extent(). So the root cause is, we're relying on btrfs_mark_ordered_io_finished() to handle ranges which is already cleaned up. Unfortunately the bug dates back to the early days when btrfs_mark_ordered_io_finished() is introduced as a no-brain choice for error paths, but such no-brain solution just hides all the race and make us less cautious when handling errors. [FIX] Instead of relying on the btrfs_mark_ordered_io_finished() call to cleanup the whole folio range, record the last successfully ran delalloc range. And combined with bio_ctrl->submit_bitmap to properly clean up any newly created ordered extents. Since we have cleaned up the ordered extents in range, we should not rely on the btrfs_mark_ordered_io_finished() inside extent_writepage() anymore. By this, we ensure btrfs_mark_ordered_io_finished() is only called once when writepage_delalloc() failed. Cc: stable(a)vger.kernel.org # 5.15+ Fixes: e65f152e4348 ("btrfs: refactor how we finish ordered extent io for endio functions") Signed-off-by: Qu Wenruo <wqu(a)suse.com> --- fs/btrfs/extent_io.c | 37 ++++++++++++++++++++++++++++++++----- 1 file changed, 32 insertions(+), 5 deletions(-) diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 438974d4def4..d619c4e148be 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -1167,6 +1167,12 @@ static noinline_for_stack int writepage_delalloc(struct btrfs_inode *inode, * last delalloc end. */ u64 last_delalloc_end = 0; + /* + * Save the last successfully ran delalloc range end (exclusive). + * This is for error handling to avoid ranges with ordered extent created + * but no IO will be submitted due to error. + */ + u64 last_finished = page_start; u64 delalloc_start = page_start; u64 delalloc_end = page_end; u64 delalloc_to_write = 0; @@ -1235,11 +1241,19 @@ static noinline_for_stack int writepage_delalloc(struct btrfs_inode *inode, found_len = last_delalloc_end + 1 - found_start; if (ret >= 0) { + /* + * Some delalloc range may be created by previous folios. + * Thus we still need to clean those range up during error + * handling. + */ + last_finished = found_start; /* No errors hit so far, run the current delalloc range. */ ret = btrfs_run_delalloc_range(inode, folio, found_start, found_start + found_len - 1, wbc); + if (ret >= 0) + last_finished = found_start + found_len; } else { /* * We've hit an error during previous delalloc range, @@ -1274,8 +1288,21 @@ static noinline_for_stack int writepage_delalloc(struct btrfs_inode *inode, delalloc_start = found_start + found_len; } - if (ret < 0) + /* + * It's possible we have some ordered extents created before we hit + * an error, cleanup non-async successfully created delalloc ranges. + */ + if (unlikely(ret < 0)) { + unsigned int bitmap_size = min( + (last_finished - page_start) >> fs_info->sectorsize_bits, + fs_info->sectors_per_page); + + for_each_set_bit(bit, &bio_ctrl->submit_bitmap, bitmap_size) + btrfs_mark_ordered_io_finished(inode, folio, + page_start + (bit << fs_info->sectorsize_bits), + fs_info->sectorsize, false); return ret; + } out: if (last_delalloc_end) delalloc_end = last_delalloc_end; @@ -1509,13 +1536,13 @@ static int extent_writepage(struct folio *folio, struct btrfs_bio_ctrl *bio_ctrl bio_ctrl->wbc->nr_to_write--; -done: - if (ret) { + if (ret) btrfs_mark_ordered_io_finished(BTRFS_I(inode), folio, page_start, PAGE_SIZE, !ret); - mapping_set_error(folio->mapping, ret); - } +done: + if (ret < 0) + mapping_set_error(folio->mapping, ret); /* * Only unlock ranges that are submitted. As there can be some async * submitted ranges inside the folio. -- 2.47.0

7 months

1
0
0 0

[PATCH 0/2] clk: qcom: gcc-{sm8550/sm8650}: Fix UFS resume from suspend issue

by Manivannan Sadhasivam via B4 Relay

Hi, This series fixes the UFS resume from suspend issue by marking the UFS PHY GDSCs as ALWAYS_ON. Starting from SM8550, UFS PHY GDSCs doesn't support retention state. So we should keep them always on so that they don't loose the state during suspend. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam(a)linaro.org> --- Manivannan Sadhasivam (2): clk: qcom: gcc-sm8550: Keep UFS PHY GDSCs ALWAYS_ON clk: qcom: gcc-sm8650: Keep UFS PHY GDSCs ALWAYS_ON drivers/clk/qcom/gcc-sm8550.c | 4 ++-- drivers/clk/qcom/gcc-sm8650.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) --- base-commit: 9852d85ec9d492ebef56dc5f229416c925758edc change-id: 20241107-ufs-clk-fix-e49ee2097594 Best regards, -- Manivannan Sadhasivam <manivannan.sadhasivam(a)linaro.org>

7 months

4
6
0 0

[PATCH 0/5] thermal/drivers/mediatek/lvts: Fixes for suspend and IRQ storm, and cleanups

by Nícolas F. R. A. Prado

Patches 1 and 2 of this series fix the issue reported by Hsin-Te Yuan [1] where MT8192-based Chromebooks are not able to suspend/resume 10 times in a row. Either one of those patches on its own is enough to fix the issue, but I believe both are desirable, so I've included them both here. Patches 3-5 fix unrelated issues that I've noticed while debugging. Patch 3 fixes IRQ storms when the temperature sensors drop to 20 Celsius. Patches 4 and 5 are cleanups to prevent future issues. To test this series, I've run 'rtcwake -m mem -d 60' 10 times in a row on a MT8192-Asurada-Spherion-rev3 Chromebook and checked that the wakeup happened 60 seconds later (+-5 seconds). I've repeated that test on 10 separate runs. Not once did the chromebook wake up early with the series applied. I've also checked that during those runs, the LVTS interrupt didn't trigger even once, while before the series it would trigger a few times per run, generally during boot or resume. Finally, as a sanity check I've verified that the interrupts still work by lowering the thermal trip point to 45 Celsius and running 'stress -c 8'. Indeed they still do, and the temperature showed by the thermal_temperature ftrace event matched the expected value. [1] https://lore.kernel.org/all/20241108-lvts-v1-1-eee339c6ca20@chromium.org/ Signed-off-by: Nícolas F. R. A. Prado <nfraprado(a)collabora.com> --- Nícolas F. R. A. Prado (5): thermal/drivers/mediatek/lvts: Disable monitor mode during suspend thermal/drivers/mediatek/lvts: Disable Stage 3 thermal threshold thermal/drivers/mediatek/lvts: Disable low offset IRQ for minimum threshold thermal/drivers/mediatek/lvts: Start sensor interrupts disabled thermal/drivers/mediatek/lvts: Only update IRQ enable for valid sensors drivers/thermal/mediatek/lvts_thermal.c | 103 ++++++++++++++++++++++---------- 1 file changed, 72 insertions(+), 31 deletions(-) --- base-commit: b852e1e7a0389ed6168ef1d38eb0bad71a6b11e8 change-id: 20241121-mt8192-lvts-filtered-suspend-fix-a5032ca8eceb Best regards, -- Nícolas F. R. A. Prado <nfraprado(a)collabora.com>

7 months

3
11
0 0

[PATCH v3 0/3] clk: qcom: Add support for multiple power-domains for a clock controller.

by Bryan O'Donoghue

v3: - Fixes commit log "per which" - Bryan - Link to v2: https://lore.kernel.org/r/20241125-b4-linux-next-24-11-18-clock-multiple-po… v2: The main change in this version is Bjorn's pointing out that pm_runtime_* inside of the gdsc_enable/gdsc_disable path would be recursive and cause a lockdep splat. Dmitry alluded to this too. Bjorn pointed to stuff being done lower in the gdsc_register() routine that might be a starting point. I iterated around that idea and came up with patch #3. When a gdsc has no parent and the pd_list is non-NULL then attach that orphan GDSC to the clock controller power-domain list. Existing subdomain code in gdsc_register() will connect the parent GDSCs in the clock-controller to the clock-controller subdomain, the new code here does that same job for a list of power-domains the clock controller depends on. To Dmitry's point about MMCX and MCX dependencies for the registers inside of the clock controller, I have switched off all references in a test dtsi and confirmed that accessing the clock-controller regs themselves isn't required. On the second point I also verified my test branch with lockdep on which was a concern with the pm_domain version of this solution but I wanted to cover it anyway with the new approach for completeness sake. Here's the item-by-item list of changes: - Adds a patch to capture pm_genpd_add_subdomain() result code - Bryan - Changes changelog of second patch to remove singleton and generally to make the commit log easier to understand - Bjorn - Uses demv_pm_domain_attach_list - Vlad - Changes error check to if (ret < 0 && ret != -EEXIST) - Vlad - Retains passing &pd_data instead of NULL - because NULL doesn't do the same thing - Bryan/Vlad - Retains standalone function qcom_cc_pds_attach() because the pd_data enumeration looks neater in a standalone function - Bryan/Vlad - Drops pm_runtime in favour of gdsc_add_subdomain_list() for each power-domain in the pd_list. The pd_list will be whatever is pointed to by power-domains = <> in the dtsi - Bjorn - Link to v1: https://lore.kernel.org/r/20241118-b4-linux-next-24-11-18-clock-multiple-po… v1: On x1e80100 and it's SKUs the Camera Clock Controller - CAMCC has multiple power-domains which power it. Usually with a single power-domain the core platform code will automatically switch on the singleton power-domain for you. If you have multiple power-domains for a device, in this case the clock controller, you need to switch those power-domains on/off yourself. The clock controllers can also contain Global Distributed Switch Controllers - GDSCs which themselves can be referenced from dtsi nodes ultimately triggering a gdsc_en() in drivers/clk/qcom/gdsc.c. As an example: cci0: cci@ac4a000 { power-domains = <&camcc TITAN_TOP_GDSC>; }; This series adds the support to attach a power-domain list to the clock-controllers and the GDSCs those controllers provide so that in the case of the above example gdsc_toggle_logic() will trigger the power-domain list with pm_runtime_resume_and_get() and pm_runtime_put_sync() respectively. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue(a)linaro.org> --- Bryan O'Donoghue (3): clk: qcom: gdsc: Capture pm_genpd_add_subdomain result code clk: qcom: common: Add support for power-domain attachment driver: clk: qcom: Support attaching subdomain list to multiple parents drivers/clk/qcom/common.c | 21 +++++++++++++++++++++ drivers/clk/qcom/gdsc.c | 41 +++++++++++++++++++++++++++++++++++++++-- drivers/clk/qcom/gdsc.h | 1 + 3 files changed, 61 insertions(+), 2 deletions(-) --- base-commit: 744cf71b8bdfcdd77aaf58395e068b7457634b2c change-id: 20241118-b4-linux-next-24-11-18-clock-multiple-power-domains-a5f994dc452a Best regards, -- Bryan O'Donoghue <bryan.odonoghue(a)linaro.org>

7 months

2
2
0 0

[RFC PATCH v2 1/5] libfs: Return ENOSPC when the directory offset range is exhausted

by cel＠kernel.org

From: Chuck Lever <chuck.lever(a)oracle.com> Testing shows that the EBUSY error return from mtree_alloc_cyclic() leaks into user space. The ERRORS section of "man creat(2)" says: > EBUSY O_EXCL was specified in flags and pathname refers > to a block device that is in use by the system > (e.g., it is mounted). ENOSPC is closer to what applications expect in this situation. Note that the normal range of simple directory offset values is 2..2^63, so hitting this error is going to be rare to impossible. Fixes: 6faddda69f62 ("libfs: Add directory operations for stable offsets") Cc: <stable(a)vger.kernel.org> # v6.9+ Signed-off-by: Chuck Lever <chuck.lever(a)oracle.com> --- fs/libfs.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/libfs.c b/fs/libfs.c index 46966fd8bcf9..bf67954b525b 100644 --- a/fs/libfs.c +++ b/fs/libfs.c @@ -288,7 +288,9 @@ int simple_offset_add(struct offset_ctx *octx, struct dentry *dentry) ret = mtree_alloc_cyclic(&octx->mt, &offset, dentry, DIR_OFFSET_MIN, LONG_MAX, &octx->next_offset, GFP_KERNEL); - if (ret < 0) + if (unlikely(ret == -EBUSY)) + return -ENOSPC; + if (unlikely(ret < 0)) return ret; offset_set(dentry, offset); -- 2.47.0

7 months

2
1
0 0

[PATCH 1/2] drm/xe/migrate: fix pat index usage

by Matthew Auld

XE_CACHE_WB must be converted into the per-platform pat index for that particular caching mode, otherwise we are just encoding whatever happens to be the value of that enum. Fixes: e8babb280b5e ("drm/xe: Convert multiple bind ops into single job") Signed-off-by: Matthew Auld <matthew.auld(a)intel.com> Cc: Matthew Brost <matthew.brost(a)intel.com> Cc: Nirmoy Das <nirmoy.das(a)intel.com> Cc: <stable(a)vger.kernel.org> # v6.12+ --- drivers/gpu/drm/xe/xe_migrate.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/xe/xe_migrate.c b/drivers/gpu/drm/xe/xe_migrate.c index cfd31ae49cc1..48e205a40fd2 100644 --- a/drivers/gpu/drm/xe/xe_migrate.c +++ b/drivers/gpu/drm/xe/xe_migrate.c @@ -1350,6 +1350,7 @@ __xe_migrate_update_pgtables(struct xe_migrate *m, /* For sysmem PTE's, need to map them in our hole.. */ if (!IS_DGFX(xe)) { + u16 pat_index = xe->pat.idx[XE_CACHE_WB]; u32 ptes, ofs; ppgtt_ofs = NUM_KERNEL_PDE - 1; @@ -1409,7 +1410,7 @@ __xe_migrate_update_pgtables(struct xe_migrate *m, pt_bo->update_index = current_update; addr = vm->pt_ops->pte_encode_bo(pt_bo, 0, - XE_CACHE_WB, 0); + pat_index, 0); bb->cs[bb->len++] = lower_32_bits(addr); bb->cs[bb->len++] = upper_32_bits(addr); } -- 2.47.0

7 months

3
5
0 0

[tip: irq/urgent] irqchip/irq-mvebu-sei: Move misplaced select() callback to SEI CP domain

by tip-bot2 for Russell King (Oracle)

The following commit has been merged into the irq/urgent branch of tip: Commit-ID: 12aaf67584cf19dc84615b7aba272fe642c35b8b Gitweb: https://git.kernel.org/tip/12aaf67584cf19dc84615b7aba272fe642c35b8b Author: Russell King (Oracle) <rmk+kernel(a)armlinux.org.uk> AuthorDate: Thu, 21 Nov 2024 12:48:25 Committer: Thomas Gleixner <tglx(a)linutronix.de> CommitterDate: Tue, 26 Nov 2024 19:58:27 +01:00 irqchip/irq-mvebu-sei: Move misplaced select() callback to SEI CP domain Commit fbdf14e90ce4 ("irqchip/irq-mvebu-sei: Switch to MSI parent") introduced in v6.11-rc1 broke Mavell Armada platforms (and possibly others) by incorrectly switching irq-mvebu-sei to MSI parent. In the above commit, msi_parent_ops is set for the sei->cp_domain, but rather than adding a .select method to mvebu_sei_cp_domain_ops (which is associated with sei->cp_domain), it was added to mvebu_sei_domain_ops which is associated with sei->sei_domain, which doesn't have any msi_parent_ops. This makes the call to msi_lib_irq_domain_select() always fail. This bug manifests itself with the following kernel messages on Armada 8040 based systems: platform f21e0000.interrupt-controller:interrupt-controller@50: deferred probe pending: (reason unknown) platform f41e0000.interrupt-controller:interrupt-controller@50: deferred probe pending: (reason unknown) Move the select callback to mvebu_sei_cp_domain_ops to cure it. Fixes: fbdf14e90ce4 ("irqchip/irq-mvebu-sei: Switch to MSI parent") Signed-off-by: Russell King (Oracle) <rmk+kernel(a)armlinux.org.uk> Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de> Cc: stable(a)vger.kernel.org Link: https://lore.kernel.org/all/E1tE6bh-004CmX-QU@rmk-PC.armlinux.org.uk --- drivers/irqchip/irq-mvebu-sei.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/irqchip/irq-mvebu-sei.c b/drivers/irqchip/irq-mvebu-sei.c index f8c70f2..065166a 100644 --- a/drivers/irqchip/irq-mvebu-sei.c +++ b/drivers/irqchip/irq-mvebu-sei.c @@ -192,7 +192,6 @@ static void mvebu_sei_domain_free(struct irq_domain *domain, unsigned int virq, } static const struct irq_domain_ops mvebu_sei_domain_ops = { - .select = msi_lib_irq_domain_select, .alloc = mvebu_sei_domain_alloc, .free = mvebu_sei_domain_free, }; @@ -306,6 +305,7 @@ static void mvebu_sei_cp_domain_free(struct irq_domain *domain, } static const struct irq_domain_ops mvebu_sei_cp_domain_ops = { + .select = msi_lib_irq_domain_select, .alloc = mvebu_sei_cp_domain_alloc, .free = mvebu_sei_cp_domain_free, };

7 months

1
0
0 0

[tip: irq/urgent] irqchip/irq-mvebu-sei: Move misplaced select() callback to SEI CP domain

by tip-bot2 for Russell King (Oracle)

The following commit has been merged into the irq/urgent branch of tip: Commit-ID: 81b9e4c6910fd779b679d7674ec7d3730c7f0e2c Gitweb: https://git.kernel.org/tip/81b9e4c6910fd779b679d7674ec7d3730c7f0e2c Author: Russell King (Oracle) <rmk+kernel(a)armlinux.org.uk> AuthorDate: Thu, 21 Nov 2024 12:48:25 Committer: Thomas Gleixner <tglx(a)linutronix.de> CommitterDate: Tue, 26 Nov 2024 19:50:42 +01:00 irqchip/irq-mvebu-sei: Move misplaced select() callback to SEI CP domain Commit fbdf14e90ce4 ("irqchip/irq-mvebu-sei: Switch to MSI parent") introduced in v6.11-rc1 broke Mavell Armada platforms (and possibly others) by incorrectly switching irq-mvebu-sei to MSI parent. In the above commit, msi_parent_ops is set for the sei->cp_domain, but rather than adding a .select method to mvebu_sei_cp_domain_ops (which is associated with sei->cp_domain), it was added to mvebu_sei_domain_ops which is associated with sei->sei_domain, which doesn't have any msi_parent_ops. This makes the call to msi_lib_irq_domain_select() always fail. This bug manifests itself with the following kernel messages on Armada 8040 based systems: platform f21e0000.interrupt-controller:interrupt-controller@50: deferred probe pending: (reason unknown) platform f41e0000.interrupt-controller:interrupt-controller@50: deferred probe pending: (reason unknown) Move the select callback to mvebu_sei_cp_domain_ops to cure it. Fixes: fbdf14e90ce4 ("irqchip/irq-mvebu-sei: Switch to MSI parent") Signed-off-by: Russell King (Oracle) <rmk+kernel(a)armlinux.org.uk> Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de> Cc: stable(a)vger.kernel.org --- drivers/irqchip/irq-mvebu-sei.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/irqchip/irq-mvebu-sei.c b/drivers/irqchip/irq-mvebu-sei.c index f8c70f2..065166a 100644 --- a/drivers/irqchip/irq-mvebu-sei.c +++ b/drivers/irqchip/irq-mvebu-sei.c @@ -192,7 +192,6 @@ static void mvebu_sei_domain_free(struct irq_domain *domain, unsigned int virq, } static const struct irq_domain_ops mvebu_sei_domain_ops = { - .select = msi_lib_irq_domain_select, .alloc = mvebu_sei_domain_alloc, .free = mvebu_sei_domain_free, }; @@ -306,6 +305,7 @@ static void mvebu_sei_cp_domain_free(struct irq_domain *domain, } static const struct irq_domain_ops mvebu_sei_cp_domain_ops = { + .select = msi_lib_irq_domain_select, .alloc = mvebu_sei_cp_domain_alloc, .free = mvebu_sei_cp_domain_free, };

7 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror November 2024