November 2024 - Linux-stable-mirror

[PATCH 0/5] thermal/drivers/mediatek/lvts: Fixes for suspend and IRQ storm, and cleanups

by Nícolas F. R. A. Prado

Patches 1 and 2 of this series fix the issue reported by Hsin-Te Yuan [1] where MT8192-based Chromebooks are not able to suspend/resume 10 times in a row. Either one of those patches on its own is enough to fix the issue, but I believe both are desirable, so I've included them both here. Patches 3-5 fix unrelated issues that I've noticed while debugging. Patch 3 fixes IRQ storms when the temperature sensors drop to 20 Celsius. Patches 4 and 5 are cleanups to prevent future issues. To test this series, I've run 'rtcwake -m mem -d 60' 10 times in a row on a MT8192-Asurada-Spherion-rev3 Chromebook and checked that the wakeup happened 60 seconds later (+-5 seconds). I've repeated that test on 10 separate runs. Not once did the chromebook wake up early with the series applied. I've also checked that during those runs, the LVTS interrupt didn't trigger even once, while before the series it would trigger a few times per run, generally during boot or resume. Finally, as a sanity check I've verified that the interrupts still work by lowering the thermal trip point to 45 Celsius and running 'stress -c 8'. Indeed they still do, and the temperature showed by the thermal_temperature ftrace event matched the expected value. [1] https://lore.kernel.org/all/20241108-lvts-v1-1-eee339c6ca20@chromium.org/ Signed-off-by: Nícolas F. R. A. Prado <nfraprado(a)collabora.com> --- Nícolas F. R. A. Prado (5): thermal/drivers/mediatek/lvts: Disable monitor mode during suspend thermal/drivers/mediatek/lvts: Disable Stage 3 thermal threshold thermal/drivers/mediatek/lvts: Disable low offset IRQ for minimum threshold thermal/drivers/mediatek/lvts: Start sensor interrupts disabled thermal/drivers/mediatek/lvts: Only update IRQ enable for valid sensors drivers/thermal/mediatek/lvts_thermal.c | 103 ++++++++++++++++++++++---------- 1 file changed, 72 insertions(+), 31 deletions(-) --- base-commit: b852e1e7a0389ed6168ef1d38eb0bad71a6b11e8 change-id: 20241121-mt8192-lvts-filtered-suspend-fix-a5032ca8eceb Best regards, -- Nícolas F. R. A. Prado <nfraprado(a)collabora.com>

11 months, 1 week

3
11
0 0

[PATCH v3 0/3] clk: qcom: Add support for multiple power-domains for a clock controller.

by Bryan O'Donoghue

v3: - Fixes commit log "per which" - Bryan - Link to v2: https://lore.kernel.org/r/20241125-b4-linux-next-24-11-18-clock-multiple-po… v2: The main change in this version is Bjorn's pointing out that pm_runtime_* inside of the gdsc_enable/gdsc_disable path would be recursive and cause a lockdep splat. Dmitry alluded to this too. Bjorn pointed to stuff being done lower in the gdsc_register() routine that might be a starting point. I iterated around that idea and came up with patch #3. When a gdsc has no parent and the pd_list is non-NULL then attach that orphan GDSC to the clock controller power-domain list. Existing subdomain code in gdsc_register() will connect the parent GDSCs in the clock-controller to the clock-controller subdomain, the new code here does that same job for a list of power-domains the clock controller depends on. To Dmitry's point about MMCX and MCX dependencies for the registers inside of the clock controller, I have switched off all references in a test dtsi and confirmed that accessing the clock-controller regs themselves isn't required. On the second point I also verified my test branch with lockdep on which was a concern with the pm_domain version of this solution but I wanted to cover it anyway with the new approach for completeness sake. Here's the item-by-item list of changes: - Adds a patch to capture pm_genpd_add_subdomain() result code - Bryan - Changes changelog of second patch to remove singleton and generally to make the commit log easier to understand - Bjorn - Uses demv_pm_domain_attach_list - Vlad - Changes error check to if (ret < 0 && ret != -EEXIST) - Vlad - Retains passing &pd_data instead of NULL - because NULL doesn't do the same thing - Bryan/Vlad - Retains standalone function qcom_cc_pds_attach() because the pd_data enumeration looks neater in a standalone function - Bryan/Vlad - Drops pm_runtime in favour of gdsc_add_subdomain_list() for each power-domain in the pd_list. The pd_list will be whatever is pointed to by power-domains = <> in the dtsi - Bjorn - Link to v1: https://lore.kernel.org/r/20241118-b4-linux-next-24-11-18-clock-multiple-po… v1: On x1e80100 and it's SKUs the Camera Clock Controller - CAMCC has multiple power-domains which power it. Usually with a single power-domain the core platform code will automatically switch on the singleton power-domain for you. If you have multiple power-domains for a device, in this case the clock controller, you need to switch those power-domains on/off yourself. The clock controllers can also contain Global Distributed Switch Controllers - GDSCs which themselves can be referenced from dtsi nodes ultimately triggering a gdsc_en() in drivers/clk/qcom/gdsc.c. As an example: cci0: cci@ac4a000 { power-domains = <&camcc TITAN_TOP_GDSC>; }; This series adds the support to attach a power-domain list to the clock-controllers and the GDSCs those controllers provide so that in the case of the above example gdsc_toggle_logic() will trigger the power-domain list with pm_runtime_resume_and_get() and pm_runtime_put_sync() respectively. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue(a)linaro.org> --- Bryan O'Donoghue (3): clk: qcom: gdsc: Capture pm_genpd_add_subdomain result code clk: qcom: common: Add support for power-domain attachment driver: clk: qcom: Support attaching subdomain list to multiple parents drivers/clk/qcom/common.c | 21 +++++++++++++++++++++ drivers/clk/qcom/gdsc.c | 41 +++++++++++++++++++++++++++++++++++++++-- drivers/clk/qcom/gdsc.h | 1 + 3 files changed, 61 insertions(+), 2 deletions(-) --- base-commit: 744cf71b8bdfcdd77aaf58395e068b7457634b2c change-id: 20241118-b4-linux-next-24-11-18-clock-multiple-power-domains-a5f994dc452a Best regards, -- Bryan O'Donoghue <bryan.odonoghue(a)linaro.org>

11 months, 1 week

2
2
0 0

[RFC PATCH v2 1/5] libfs: Return ENOSPC when the directory offset range is exhausted

by cel＠kernel.org

From: Chuck Lever <chuck.lever(a)oracle.com> Testing shows that the EBUSY error return from mtree_alloc_cyclic() leaks into user space. The ERRORS section of "man creat(2)" says: > EBUSY O_EXCL was specified in flags and pathname refers > to a block device that is in use by the system > (e.g., it is mounted). ENOSPC is closer to what applications expect in this situation. Note that the normal range of simple directory offset values is 2..2^63, so hitting this error is going to be rare to impossible. Fixes: 6faddda69f62 ("libfs: Add directory operations for stable offsets") Cc: <stable(a)vger.kernel.org> # v6.9+ Signed-off-by: Chuck Lever <chuck.lever(a)oracle.com> --- fs/libfs.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/libfs.c b/fs/libfs.c index 46966fd8bcf9..bf67954b525b 100644 --- a/fs/libfs.c +++ b/fs/libfs.c @@ -288,7 +288,9 @@ int simple_offset_add(struct offset_ctx *octx, struct dentry *dentry) ret = mtree_alloc_cyclic(&octx->mt, &offset, dentry, DIR_OFFSET_MIN, LONG_MAX, &octx->next_offset, GFP_KERNEL); - if (ret < 0) + if (unlikely(ret == -EBUSY)) + return -ENOSPC; + if (unlikely(ret < 0)) return ret; offset_set(dentry, offset); -- 2.47.0

11 months, 1 week

2
1
0 0

[PATCH 1/2] drm/xe/migrate: fix pat index usage

by Matthew Auld

XE_CACHE_WB must be converted into the per-platform pat index for that particular caching mode, otherwise we are just encoding whatever happens to be the value of that enum. Fixes: e8babb280b5e ("drm/xe: Convert multiple bind ops into single job") Signed-off-by: Matthew Auld <matthew.auld(a)intel.com> Cc: Matthew Brost <matthew.brost(a)intel.com> Cc: Nirmoy Das <nirmoy.das(a)intel.com> Cc: <stable(a)vger.kernel.org> # v6.12+ --- drivers/gpu/drm/xe/xe_migrate.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/xe/xe_migrate.c b/drivers/gpu/drm/xe/xe_migrate.c index cfd31ae49cc1..48e205a40fd2 100644 --- a/drivers/gpu/drm/xe/xe_migrate.c +++ b/drivers/gpu/drm/xe/xe_migrate.c @@ -1350,6 +1350,7 @@ __xe_migrate_update_pgtables(struct xe_migrate *m, /* For sysmem PTE's, need to map them in our hole.. */ if (!IS_DGFX(xe)) { + u16 pat_index = xe->pat.idx[XE_CACHE_WB]; u32 ptes, ofs; ppgtt_ofs = NUM_KERNEL_PDE - 1; @@ -1409,7 +1410,7 @@ __xe_migrate_update_pgtables(struct xe_migrate *m, pt_bo->update_index = current_update; addr = vm->pt_ops->pte_encode_bo(pt_bo, 0, - XE_CACHE_WB, 0); + pat_index, 0); bb->cs[bb->len++] = lower_32_bits(addr); bb->cs[bb->len++] = upper_32_bits(addr); } -- 2.47.0

11 months, 1 week

3
5
0 0

[tip: irq/urgent] irqchip/irq-mvebu-sei: Move misplaced select() callback to SEI CP domain

by tip-bot2 for Russell King (Oracle)

The following commit has been merged into the irq/urgent branch of tip: Commit-ID: 12aaf67584cf19dc84615b7aba272fe642c35b8b Gitweb: https://git.kernel.org/tip/12aaf67584cf19dc84615b7aba272fe642c35b8b Author: Russell King (Oracle) <rmk+kernel(a)armlinux.org.uk> AuthorDate: Thu, 21 Nov 2024 12:48:25 Committer: Thomas Gleixner <tglx(a)linutronix.de> CommitterDate: Tue, 26 Nov 2024 19:58:27 +01:00 irqchip/irq-mvebu-sei: Move misplaced select() callback to SEI CP domain Commit fbdf14e90ce4 ("irqchip/irq-mvebu-sei: Switch to MSI parent") introduced in v6.11-rc1 broke Mavell Armada platforms (and possibly others) by incorrectly switching irq-mvebu-sei to MSI parent. In the above commit, msi_parent_ops is set for the sei->cp_domain, but rather than adding a .select method to mvebu_sei_cp_domain_ops (which is associated with sei->cp_domain), it was added to mvebu_sei_domain_ops which is associated with sei->sei_domain, which doesn't have any msi_parent_ops. This makes the call to msi_lib_irq_domain_select() always fail. This bug manifests itself with the following kernel messages on Armada 8040 based systems: platform f21e0000.interrupt-controller:interrupt-controller@50: deferred probe pending: (reason unknown) platform f41e0000.interrupt-controller:interrupt-controller@50: deferred probe pending: (reason unknown) Move the select callback to mvebu_sei_cp_domain_ops to cure it. Fixes: fbdf14e90ce4 ("irqchip/irq-mvebu-sei: Switch to MSI parent") Signed-off-by: Russell King (Oracle) <rmk+kernel(a)armlinux.org.uk> Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de> Cc: stable(a)vger.kernel.org Link: https://lore.kernel.org/all/E1tE6bh-004CmX-QU@rmk-PC.armlinux.org.uk --- drivers/irqchip/irq-mvebu-sei.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/irqchip/irq-mvebu-sei.c b/drivers/irqchip/irq-mvebu-sei.c index f8c70f2..065166a 100644 --- a/drivers/irqchip/irq-mvebu-sei.c +++ b/drivers/irqchip/irq-mvebu-sei.c @@ -192,7 +192,6 @@ static void mvebu_sei_domain_free(struct irq_domain *domain, unsigned int virq, } static const struct irq_domain_ops mvebu_sei_domain_ops = { - .select = msi_lib_irq_domain_select, .alloc = mvebu_sei_domain_alloc, .free = mvebu_sei_domain_free, }; @@ -306,6 +305,7 @@ static void mvebu_sei_cp_domain_free(struct irq_domain *domain, } static const struct irq_domain_ops mvebu_sei_cp_domain_ops = { + .select = msi_lib_irq_domain_select, .alloc = mvebu_sei_cp_domain_alloc, .free = mvebu_sei_cp_domain_free, };

11 months, 1 week

1
0
0 0

[tip: irq/urgent] irqchip/irq-mvebu-sei: Move misplaced select() callback to SEI CP domain

by tip-bot2 for Russell King (Oracle)

The following commit has been merged into the irq/urgent branch of tip: Commit-ID: 81b9e4c6910fd779b679d7674ec7d3730c7f0e2c Gitweb: https://git.kernel.org/tip/81b9e4c6910fd779b679d7674ec7d3730c7f0e2c Author: Russell King (Oracle) <rmk+kernel(a)armlinux.org.uk> AuthorDate: Thu, 21 Nov 2024 12:48:25 Committer: Thomas Gleixner <tglx(a)linutronix.de> CommitterDate: Tue, 26 Nov 2024 19:50:42 +01:00 irqchip/irq-mvebu-sei: Move misplaced select() callback to SEI CP domain Commit fbdf14e90ce4 ("irqchip/irq-mvebu-sei: Switch to MSI parent") introduced in v6.11-rc1 broke Mavell Armada platforms (and possibly others) by incorrectly switching irq-mvebu-sei to MSI parent. In the above commit, msi_parent_ops is set for the sei->cp_domain, but rather than adding a .select method to mvebu_sei_cp_domain_ops (which is associated with sei->cp_domain), it was added to mvebu_sei_domain_ops which is associated with sei->sei_domain, which doesn't have any msi_parent_ops. This makes the call to msi_lib_irq_domain_select() always fail. This bug manifests itself with the following kernel messages on Armada 8040 based systems: platform f21e0000.interrupt-controller:interrupt-controller@50: deferred probe pending: (reason unknown) platform f41e0000.interrupt-controller:interrupt-controller@50: deferred probe pending: (reason unknown) Move the select callback to mvebu_sei_cp_domain_ops to cure it. Fixes: fbdf14e90ce4 ("irqchip/irq-mvebu-sei: Switch to MSI parent") Signed-off-by: Russell King (Oracle) <rmk+kernel(a)armlinux.org.uk> Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de> Cc: stable(a)vger.kernel.org --- drivers/irqchip/irq-mvebu-sei.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/irqchip/irq-mvebu-sei.c b/drivers/irqchip/irq-mvebu-sei.c index f8c70f2..065166a 100644 --- a/drivers/irqchip/irq-mvebu-sei.c +++ b/drivers/irqchip/irq-mvebu-sei.c @@ -192,7 +192,6 @@ static void mvebu_sei_domain_free(struct irq_domain *domain, unsigned int virq, } static const struct irq_domain_ops mvebu_sei_domain_ops = { - .select = msi_lib_irq_domain_select, .alloc = mvebu_sei_domain_alloc, .free = mvebu_sei_domain_free, }; @@ -306,6 +305,7 @@ static void mvebu_sei_cp_domain_free(struct irq_domain *domain, } static const struct irq_domain_ops mvebu_sei_cp_domain_ops = { + .select = msi_lib_irq_domain_select, .alloc = mvebu_sei_cp_domain_alloc, .free = mvebu_sei_cp_domain_free, };

11 months, 1 week

1
0
0 0

[PATCH 6.6/6.1] drm/amd/display: Initialize denominators' default to 1

by Xiangyu Chen

From: Alex Hung <alex.hung(a)amd.com> [ Upstream commit b995c0a6de6c74656a0c39cd57a0626351b13e3c ] [WHAT & HOW] Variables used as denominators and maybe not assigned to other values, should not be 0. Change their default to 1 so they are never 0. This fixes 10 DIVIDE_BY_ZERO issues reported by Coverity. Reviewed-by: Harry Wentland <harry.wentland(a)amd.com> Signed-off-by: Jerry Zuo <jerry.zuo(a)amd.com> Signed-off-by: Alex Hung <alex.hung(a)amd.com> Tested-by: Daniel Wheeler <daniel.wheeler(a)amd.com> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> [Xiangyu: Bp to fix CVE: CVE-2024-49899 Discard the dml2_core/dml2_core_shared.c due to this file no exists] Signed-off-by: Xiangyu Chen <xiangyu.chen(a)windriver.com> --- .../gpu/drm/amd/display/dc/dml/dcn20/display_rq_dlg_calc_20.c | 2 +- drivers/gpu/drm/amd/display/dc/dml/dml1_display_rq_dlg_calc.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn20/display_rq_dlg_calc_20.c b/drivers/gpu/drm/amd/display/dc/dml/dcn20/display_rq_dlg_calc_20.c index 548cdef8a8ad..543ce9a08cfd 100644 --- a/drivers/gpu/drm/amd/display/dc/dml/dcn20/display_rq_dlg_calc_20.c +++ b/drivers/gpu/drm/amd/display/dc/dml/dcn20/display_rq_dlg_calc_20.c @@ -78,7 +78,7 @@ static void calculate_ttu_cursor(struct display_mode_lib *mode_lib, static unsigned int get_bytes_per_element(enum source_format_class source_format, bool is_chroma) { - unsigned int ret_val = 0; + unsigned int ret_val = 1; if (source_format == dm_444_16) { if (!is_chroma) diff --git a/drivers/gpu/drm/amd/display/dc/dml/dml1_display_rq_dlg_calc.c b/drivers/gpu/drm/amd/display/dc/dml/dml1_display_rq_dlg_calc.c index 3df559c591f8..70df992f859d 100644 --- a/drivers/gpu/drm/amd/display/dc/dml/dml1_display_rq_dlg_calc.c +++ b/drivers/gpu/drm/amd/display/dc/dml/dml1_display_rq_dlg_calc.c @@ -39,7 +39,7 @@ static unsigned int get_bytes_per_element(enum source_format_class source_format, bool is_chroma) { - unsigned int ret_val = 0; + unsigned int ret_val = 1; if (source_format == dm_444_16) { if (!is_chroma) -- 2.43.0

11 months, 1 week

2
1
0 0

[PATCH 6.1/6.6] drm/amd/display: Add NULL check for function pointer in dcn32_set_output_transfer_func

by Xiangyu Chen

From: Srinivasan Shanmugam <srinivasan.shanmugam(a)amd.com> [ Upstream commit 28574b08c70e56d34d6f6379326a860b96749051 ] This commit adds a null check for the set_output_gamma function pointer in the dcn32_set_output_transfer_func function. Previously, set_output_gamma was being checked for null, but then it was being dereferenced without any null check. This could lead to a null pointer dereference if set_output_gamma is null. To fix this, we now ensure that set_output_gamma is not null before dereferencing it. We do this by adding a null check for set_output_gamma before the call to set_output_gamma. Cc: Tom Chung <chiahsuan.chung(a)amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira(a)amd.com> Cc: Roman Li <roman.li(a)amd.com> Cc: Alex Hung <alex.hung(a)amd.com> Cc: Aurabindo Pillai <aurabindo.pillai(a)amd.com> Cc: Harry Wentland <harry.wentland(a)amd.com> Cc: Hamza Mahfooz <hamza.mahfooz(a)amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam(a)amd.com> Reviewed-by: Tom Chung <chiahsuan.chung(a)amd.com> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> Signed-off-by: Xiangyu Chen <xiangyu.chen(a)windriver.com> --- drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c index bd75d3cba098..d3ad13bf35c8 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c +++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c @@ -667,7 +667,9 @@ bool dcn32_set_output_transfer_func(struct dc *dc, } } - mpc->funcs->set_output_gamma(mpc, mpcc_id, params); + if (mpc->funcs->set_output_gamma) + mpc->funcs->set_output_gamma(mpc, mpcc_id, params); + return ret; } -- 2.43.0

11 months, 1 week

2
1
0 0

[PATCH 6.6] nvme: apple: fix device reference counting

by Bin Lan

From: Keith Busch <kbusch(a)kernel.org> [ Upstream commit b9ecbfa45516182cd062fecd286db7907ba84210 ] Drivers must call nvme_uninit_ctrl after a successful nvme_init_ctrl. Split the allocation side out to make the error handling boundary easier to navigate. The apple driver had been doing this wrong, leaking the controller device memory on a tagset failure. Reviewed-by: Christoph Hellwig <hch(a)lst.de> Reviewed-by: Chaitanya Kulkarni <kch(a)nvidia.com> Signed-off-by: Keith Busch <kbusch(a)kernel.org> [ Resolve minor conflicts ] Signed-off-by: Bin Lan <bin.lan.cn(a)windriver.com> --- drivers/nvme/host/apple.c | 27 ++++++++++++++++++++++----- 1 file changed, 22 insertions(+), 5 deletions(-) diff --git a/drivers/nvme/host/apple.c b/drivers/nvme/host/apple.c index 596bb11eeba5..396eb9437659 100644 --- a/drivers/nvme/host/apple.c +++ b/drivers/nvme/host/apple.c @@ -1387,7 +1387,7 @@ static void devm_apple_nvme_mempool_destroy(void *data) mempool_destroy(data); } -static int apple_nvme_probe(struct platform_device *pdev) +static struct apple_nvme *apple_nvme_alloc(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct apple_nvme *anv; @@ -1395,7 +1395,7 @@ static int apple_nvme_probe(struct platform_device *pdev) anv = devm_kzalloc(dev, sizeof(*anv), GFP_KERNEL); if (!anv) - return -ENOMEM; + return ERR_PTR(-ENOMEM); anv->dev = get_device(dev); anv->adminq.is_adminq = true; @@ -1515,10 +1515,26 @@ static int apple_nvme_probe(struct platform_device *pdev) goto put_dev; } + return anv; +put_dev: + put_device(anv->dev); + return ERR_PTR(ret); +} + +static int apple_nvme_probe(struct platform_device *pdev) +{ + struct apple_nvme *anv; + int ret; + + anv = apple_nvme_alloc(pdev); + if (IS_ERR(anv)) + return PTR_ERR(anv); + anv->ctrl.admin_q = blk_mq_init_queue(&anv->admin_tagset); if (IS_ERR(anv->ctrl.admin_q)) { ret = -ENOMEM; - goto put_dev; + anv->ctrl.admin_q = NULL; + goto out_uninit_ctrl; } nvme_reset_ctrl(&anv->ctrl); @@ -1526,8 +1542,9 @@ static int apple_nvme_probe(struct platform_device *pdev) return 0; -put_dev: - put_device(anv->dev); +out_uninit_ctrl: + nvme_uninit_ctrl(&anv->ctrl); + nvme_put_ctrl(&anv->ctrl); return ret; } -- 2.34.1

11 months, 1 week

2
1
0 0

[PATCH 6.1] drm/amd/display: Check null-initialized variables

by Xiangyu Chen

From: Alex Hung <alex.hung(a)amd.com> [ Upstream commit 367cd9ceba1933b63bc1d87d967baf6d9fd241d2 ] [WHAT & HOW] drr_timing and subvp_pipe are initialized to null and they are not always assigned new values. It is necessary to check for null before dereferencing. This fixes 2 FORWARD_NULL issues reported by Coverity. Reviewed-by: Nevenko Stupar <nevenko.stupar(a)amd.com> Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira(a)amd.com> Signed-off-by: Jerry Zuo <jerry.zuo(a)amd.com> Signed-off-by: Alex Hung <alex.hung(a)amd.com> Tested-by: Daniel Wheeler <daniel.wheeler(a)amd.com> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> [Xiangyu: BP to fix CVE: CVE-2024-49898, Minor conflict resolution] Signed-off-by: Xiangyu Chen <xiangyu.chen(a)windriver.com> --- drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c index 85e0d1c2a908..9d8917f72d18 100644 --- a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c +++ b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c @@ -900,8 +900,9 @@ static bool subvp_drr_schedulable(struct dc *dc, struct dc_state *context, struc * for VBLANK: (VACTIVE region of the SubVP pipe can fit the MALL prefetch, VBLANK frame time, * and the max of (VBLANK blanking time, MALL region)). */ - if (stretched_drr_us < (1 / (double)drr_timing->min_refresh_in_uhz) * 1000000 * 1000000 && - subvp_active_us - prefetch_us - stretched_drr_us - max_vblank_mallregion > 0) + if (drr_timing && + stretched_drr_us < (1 / (double)drr_timing->min_refresh_in_uhz) * 1000000 * 1000000 && + subvp_active_us - prefetch_us - stretched_drr_us - max_vblank_mallregion > 0) schedulable = true; return schedulable; @@ -966,7 +967,7 @@ static bool subvp_vblank_schedulable(struct dc *dc, struct dc_state *context) if (found && context->res_ctx.pipe_ctx[vblank_index].stream->ignore_msa_timing_param) { // SUBVP + DRR case schedulable = subvp_drr_schedulable(dc, context, &context->res_ctx.pipe_ctx[vblank_index]); - } else if (found) { + } else if (found && subvp_pipe) { main_timing = &subvp_pipe->stream->timing; phantom_timing = &subvp_pipe->stream->mall_stream_config.paired_stream->timing; vblank_timing = &context->res_ctx.pipe_ctx[vblank_index].stream->timing; -- 2.43.0

11 months, 1 week

2
3
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror November 2024