December 2024 - Linux-stable-mirror

[PATCH AUTOSEL 5.15 1/5] usb: chipidea: udc: create bounce buffer for problem sglist entries if possible

by Sasha Levin

From: Xu Yang <xu.yang_2(a)nxp.com> [ Upstream commit edfcc455c85ccc5855f0c329ca5a2d85cc9fc6c6 ] The chipidea controller doesn't fully support sglist, such as it can not transfer data spanned more dTDs to form a bus packet, so it can only work on very limited cases. The limitations as below: 1. the end address of the first sg buffer must be 4KB aligned. 2. the start and end address of the middle sg buffer must be 4KB aligned. 3. the start address of the first sg buffer must be 4KB aligned. However, not all the use cases violate these limitations. To make the controller compatible with most of the cases, this will try to bounce the problem sglist entries which can be found by sglist_get_invalid_entry(). Then a bounced line buffer (the size will roundup to page size) will be allocated to replace the remaining problem sg entries. The data will be copied between problem sg entries and bounce buffer according to the transfer direction. The bounce buffer will be freed when the request completed. Acked-by: Peter Chen <peter.chen(a)kernel.com> Signed-off-by: Xu Yang <xu.yang_2(a)nxp.com> Link: https://lore.kernel.org/r/20240923081203.2851768-3-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/usb/chipidea/udc.c | 148 +++++++++++++++++++++++++++++++++++++ drivers/usb/chipidea/udc.h | 2 + 2 files changed, 150 insertions(+) diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index 8b6745b7588c7..d3be658768a9a 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -10,6 +10,7 @@ #include <linux/delay.h> #include <linux/device.h> #include <linux/dmapool.h> +#include <linux/dma-direct.h> #include <linux/err.h> #include <linux/irqreturn.h> #include <linux/kernel.h> @@ -538,6 +539,126 @@ static int prepare_td_for_sg(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq) return ret; } +/* + * Verify if the scatterlist is valid by iterating each sg entry. + * Return invalid sg entry index which is less than num_sgs. + */ +static int sglist_get_invalid_entry(struct device *dma_dev, u8 dir, + struct usb_request *req) +{ + int i; + struct scatterlist *s = req->sg; + + if (req->num_sgs == 1) + return 1; + + dir = dir ? DMA_TO_DEVICE : DMA_FROM_DEVICE; + + for (i = 0; i < req->num_sgs; i++, s = sg_next(s)) { + /* Only small sg (generally last sg) may be bounced. If + * that happens. we can't ensure the addr is page-aligned + * after dma map. + */ + if (dma_kmalloc_needs_bounce(dma_dev, s->length, dir)) + break; + + /* Make sure each sg start address (except first sg) is + * page-aligned and end address (except last sg) is also + * page-aligned. + */ + if (i == 0) { + if (!IS_ALIGNED(s->offset + s->length, + CI_HDRC_PAGE_SIZE)) + break; + } else { + if (s->offset) + break; + if (!sg_is_last(s) && !IS_ALIGNED(s->length, + CI_HDRC_PAGE_SIZE)) + break; + } + } + + return i; +} + +static int sglist_do_bounce(struct ci_hw_req *hwreq, int index, + bool copy, unsigned int *bounced) +{ + void *buf; + int i, ret, nents, num_sgs; + unsigned int rest, rounded; + struct scatterlist *sg, *src, *dst; + + nents = index + 1; + ret = sg_alloc_table(&hwreq->sgt, nents, GFP_KERNEL); + if (ret) + return ret; + + sg = src = hwreq->req.sg; + num_sgs = hwreq->req.num_sgs; + rest = hwreq->req.length; + dst = hwreq->sgt.sgl; + + for (i = 0; i < index; i++) { + memcpy(dst, src, sizeof(*src)); + rest -= src->length; + src = sg_next(src); + dst = sg_next(dst); + } + + /* create one bounce buffer */ + rounded = round_up(rest, CI_HDRC_PAGE_SIZE); + buf = kmalloc(rounded, GFP_KERNEL); + if (!buf) { + sg_free_table(&hwreq->sgt); + return -ENOMEM; + } + + sg_set_buf(dst, buf, rounded); + + hwreq->req.sg = hwreq->sgt.sgl; + hwreq->req.num_sgs = nents; + hwreq->sgt.sgl = sg; + hwreq->sgt.nents = num_sgs; + + if (copy) + sg_copy_to_buffer(src, num_sgs - index, buf, rest); + + *bounced = rest; + + return 0; +} + +static void sglist_do_debounce(struct ci_hw_req *hwreq, bool copy) +{ + void *buf; + int i, nents, num_sgs; + struct scatterlist *sg, *src, *dst; + + sg = hwreq->req.sg; + num_sgs = hwreq->req.num_sgs; + src = sg_last(sg, num_sgs); + buf = sg_virt(src); + + if (copy) { + dst = hwreq->sgt.sgl; + for (i = 0; i < num_sgs - 1; i++) + dst = sg_next(dst); + + nents = hwreq->sgt.nents - num_sgs + 1; + sg_copy_from_buffer(dst, nents, buf, sg_dma_len(src)); + } + + hwreq->req.sg = hwreq->sgt.sgl; + hwreq->req.num_sgs = hwreq->sgt.nents; + hwreq->sgt.sgl = sg; + hwreq->sgt.nents = num_sgs; + + kfree(buf); + sg_free_table(&hwreq->sgt); +} + /** * _hardware_enqueue: configures a request at hardware level * @hwep: endpoint @@ -550,6 +671,8 @@ static int _hardware_enqueue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq) struct ci_hdrc *ci = hwep->ci; int ret = 0; struct td_node *firstnode, *lastnode; + unsigned int bounced_size; + struct scatterlist *sg; /* don't queue twice */ if (hwreq->req.status == -EALREADY) @@ -557,11 +680,29 @@ static int _hardware_enqueue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq) hwreq->req.status = -EALREADY; + if (hwreq->req.num_sgs && hwreq->req.length && + ci->has_short_pkt_limit) { + ret = sglist_get_invalid_entry(ci->dev->parent, hwep->dir, + &hwreq->req); + if (ret < hwreq->req.num_sgs) { + ret = sglist_do_bounce(hwreq, ret, hwep->dir == TX, + &bounced_size); + if (ret) + return ret; + } + } + ret = usb_gadget_map_request_by_dev(ci->dev->parent, &hwreq->req, hwep->dir); if (ret) return ret; + if (hwreq->sgt.sgl) { + /* We've mapped a bigger buffer, now recover the actual size */ + sg = sg_last(hwreq->req.sg, hwreq->req.num_sgs); + sg_dma_len(sg) = min(sg_dma_len(sg), bounced_size); + } + if (hwreq->req.num_mapped_sgs) ret = prepare_td_for_sg(hwep, hwreq); else @@ -724,6 +865,10 @@ static int _hardware_dequeue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq) usb_gadget_unmap_request_by_dev(hwep->ci->dev->parent, &hwreq->req, hwep->dir); + /* sglist bounced */ + if (hwreq->sgt.sgl) + sglist_do_debounce(hwreq, hwep->dir == RX); + hwreq->req.actual += actual; if (hwreq->req.status) @@ -1565,6 +1710,9 @@ static int ep_dequeue(struct usb_ep *ep, struct usb_request *req) usb_gadget_unmap_request(&hwep->ci->gadget, req, hwep->dir); + if (hwreq->sgt.sgl) + sglist_do_debounce(hwreq, false); + req->status = -ECONNRESET; if (hwreq->req.complete != NULL) { diff --git a/drivers/usb/chipidea/udc.h b/drivers/usb/chipidea/udc.h index 5193df1e18c75..c8a47389a46bb 100644 --- a/drivers/usb/chipidea/udc.h +++ b/drivers/usb/chipidea/udc.h @@ -69,11 +69,13 @@ struct td_node { * @req: request structure for gadget drivers * @queue: link to QH list * @tds: link to TD list + * @sgt: hold original sglist when bounce sglist */ struct ci_hw_req { struct usb_request req; struct list_head queue; struct list_head tds; + struct sg_table sgt; }; #ifdef CONFIG_USB_CHIPIDEA_UDC -- 2.43.0

6 months, 2 weeks

2
5
0 0

[PATCH AUTOSEL 5.10 1/5] usb: chipidea: udc: create bounce buffer for problem sglist entries if possible

by Sasha Levin

From: Xu Yang <xu.yang_2(a)nxp.com> [ Upstream commit edfcc455c85ccc5855f0c329ca5a2d85cc9fc6c6 ] The chipidea controller doesn't fully support sglist, such as it can not transfer data spanned more dTDs to form a bus packet, so it can only work on very limited cases. The limitations as below: 1. the end address of the first sg buffer must be 4KB aligned. 2. the start and end address of the middle sg buffer must be 4KB aligned. 3. the start address of the first sg buffer must be 4KB aligned. However, not all the use cases violate these limitations. To make the controller compatible with most of the cases, this will try to bounce the problem sglist entries which can be found by sglist_get_invalid_entry(). Then a bounced line buffer (the size will roundup to page size) will be allocated to replace the remaining problem sg entries. The data will be copied between problem sg entries and bounce buffer according to the transfer direction. The bounce buffer will be freed when the request completed. Acked-by: Peter Chen <peter.chen(a)kernel.com> Signed-off-by: Xu Yang <xu.yang_2(a)nxp.com> Link: https://lore.kernel.org/r/20240923081203.2851768-3-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/usb/chipidea/udc.c | 148 +++++++++++++++++++++++++++++++++++++ drivers/usb/chipidea/udc.h | 2 + 2 files changed, 150 insertions(+) diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index 5cdf03534c0c7..f4661f654af88 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -10,6 +10,7 @@ #include <linux/delay.h> #include <linux/device.h> #include <linux/dmapool.h> +#include <linux/dma-direct.h> #include <linux/err.h> #include <linux/irqreturn.h> #include <linux/kernel.h> @@ -537,6 +538,126 @@ static int prepare_td_for_sg(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq) return ret; } +/* + * Verify if the scatterlist is valid by iterating each sg entry. + * Return invalid sg entry index which is less than num_sgs. + */ +static int sglist_get_invalid_entry(struct device *dma_dev, u8 dir, + struct usb_request *req) +{ + int i; + struct scatterlist *s = req->sg; + + if (req->num_sgs == 1) + return 1; + + dir = dir ? DMA_TO_DEVICE : DMA_FROM_DEVICE; + + for (i = 0; i < req->num_sgs; i++, s = sg_next(s)) { + /* Only small sg (generally last sg) may be bounced. If + * that happens. we can't ensure the addr is page-aligned + * after dma map. + */ + if (dma_kmalloc_needs_bounce(dma_dev, s->length, dir)) + break; + + /* Make sure each sg start address (except first sg) is + * page-aligned and end address (except last sg) is also + * page-aligned. + */ + if (i == 0) { + if (!IS_ALIGNED(s->offset + s->length, + CI_HDRC_PAGE_SIZE)) + break; + } else { + if (s->offset) + break; + if (!sg_is_last(s) && !IS_ALIGNED(s->length, + CI_HDRC_PAGE_SIZE)) + break; + } + } + + return i; +} + +static int sglist_do_bounce(struct ci_hw_req *hwreq, int index, + bool copy, unsigned int *bounced) +{ + void *buf; + int i, ret, nents, num_sgs; + unsigned int rest, rounded; + struct scatterlist *sg, *src, *dst; + + nents = index + 1; + ret = sg_alloc_table(&hwreq->sgt, nents, GFP_KERNEL); + if (ret) + return ret; + + sg = src = hwreq->req.sg; + num_sgs = hwreq->req.num_sgs; + rest = hwreq->req.length; + dst = hwreq->sgt.sgl; + + for (i = 0; i < index; i++) { + memcpy(dst, src, sizeof(*src)); + rest -= src->length; + src = sg_next(src); + dst = sg_next(dst); + } + + /* create one bounce buffer */ + rounded = round_up(rest, CI_HDRC_PAGE_SIZE); + buf = kmalloc(rounded, GFP_KERNEL); + if (!buf) { + sg_free_table(&hwreq->sgt); + return -ENOMEM; + } + + sg_set_buf(dst, buf, rounded); + + hwreq->req.sg = hwreq->sgt.sgl; + hwreq->req.num_sgs = nents; + hwreq->sgt.sgl = sg; + hwreq->sgt.nents = num_sgs; + + if (copy) + sg_copy_to_buffer(src, num_sgs - index, buf, rest); + + *bounced = rest; + + return 0; +} + +static void sglist_do_debounce(struct ci_hw_req *hwreq, bool copy) +{ + void *buf; + int i, nents, num_sgs; + struct scatterlist *sg, *src, *dst; + + sg = hwreq->req.sg; + num_sgs = hwreq->req.num_sgs; + src = sg_last(sg, num_sgs); + buf = sg_virt(src); + + if (copy) { + dst = hwreq->sgt.sgl; + for (i = 0; i < num_sgs - 1; i++) + dst = sg_next(dst); + + nents = hwreq->sgt.nents - num_sgs + 1; + sg_copy_from_buffer(dst, nents, buf, sg_dma_len(src)); + } + + hwreq->req.sg = hwreq->sgt.sgl; + hwreq->req.num_sgs = hwreq->sgt.nents; + hwreq->sgt.sgl = sg; + hwreq->sgt.nents = num_sgs; + + kfree(buf); + sg_free_table(&hwreq->sgt); +} + /** * _hardware_enqueue: configures a request at hardware level * @hwep: endpoint @@ -549,6 +670,8 @@ static int _hardware_enqueue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq) struct ci_hdrc *ci = hwep->ci; int ret = 0; struct td_node *firstnode, *lastnode; + unsigned int bounced_size; + struct scatterlist *sg; /* don't queue twice */ if (hwreq->req.status == -EALREADY) @@ -556,11 +679,29 @@ static int _hardware_enqueue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq) hwreq->req.status = -EALREADY; + if (hwreq->req.num_sgs && hwreq->req.length && + ci->has_short_pkt_limit) { + ret = sglist_get_invalid_entry(ci->dev->parent, hwep->dir, + &hwreq->req); + if (ret < hwreq->req.num_sgs) { + ret = sglist_do_bounce(hwreq, ret, hwep->dir == TX, + &bounced_size); + if (ret) + return ret; + } + } + ret = usb_gadget_map_request_by_dev(ci->dev->parent, &hwreq->req, hwep->dir); if (ret) return ret; + if (hwreq->sgt.sgl) { + /* We've mapped a bigger buffer, now recover the actual size */ + sg = sg_last(hwreq->req.sg, hwreq->req.num_sgs); + sg_dma_len(sg) = min(sg_dma_len(sg), bounced_size); + } + if (hwreq->req.num_mapped_sgs) ret = prepare_td_for_sg(hwep, hwreq); else @@ -718,6 +859,10 @@ static int _hardware_dequeue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq) usb_gadget_unmap_request_by_dev(hwep->ci->dev->parent, &hwreq->req, hwep->dir); + /* sglist bounced */ + if (hwreq->sgt.sgl) + sglist_do_debounce(hwreq, hwep->dir == RX); + hwreq->req.actual += actual; if (hwreq->req.status) @@ -1559,6 +1704,9 @@ static int ep_dequeue(struct usb_ep *ep, struct usb_request *req) usb_gadget_unmap_request(&hwep->ci->gadget, req, hwep->dir); + if (hwreq->sgt.sgl) + sglist_do_debounce(hwreq, false); + req->status = -ECONNRESET; if (hwreq->req.complete != NULL) { diff --git a/drivers/usb/chipidea/udc.h b/drivers/usb/chipidea/udc.h index 5193df1e18c75..c8a47389a46bb 100644 --- a/drivers/usb/chipidea/udc.h +++ b/drivers/usb/chipidea/udc.h @@ -69,11 +69,13 @@ struct td_node { * @req: request structure for gadget drivers * @queue: link to QH list * @tds: link to TD list + * @sgt: hold original sglist when bounce sglist */ struct ci_hw_req { struct usb_request req; struct list_head queue; struct list_head tds; + struct sg_table sgt; }; #ifdef CONFIG_USB_CHIPIDEA_UDC -- 2.43.0

6 months, 2 weeks

2
5
0 0

[PATCH AUTOSEL 5.4 1/3] usb: chipidea: udc: handle USB Error Interrupt if IOC not set

by Sasha Levin

From: Xu Yang <xu.yang_2(a)nxp.com> [ Upstream commit 548f48b66c0c5d4b9795a55f304b7298cde2a025 ] As per USBSTS register description about UEI: When completion of a USB transaction results in an error condition, this bit is set by the Host/Device Controller. This bit is set along with the USBINT bit, if the TD on which the error interrupt occurred also had its interrupt on complete (IOC) bit set. UI is set only when IOC set. Add checking UEI to fix miss call isr_tr_complete_handler() when IOC have not set and transfer error happen. Acked-by: Peter Chen <peter.chen(a)kernel.com> Signed-off-by: Xu Yang <xu.yang_2(a)nxp.com> Link: https://lore.kernel.org/r/20240926022906.473319-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/usb/chipidea/udc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index 72d62abb6f285..a6ce6b89b271a 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -1902,7 +1902,7 @@ static irqreturn_t udc_irq(struct ci_hdrc *ci) } } - if (USBi_UI & intr) + if ((USBi_UI | USBi_UEI) & intr) isr_tr_complete_handler(ci); if ((USBi_SLI & intr) && !(ci->suspended)) { -- 2.43.0

6 months, 2 weeks

2
3
0 0

[PATCH AUTOSEL 4.19 1/3] usb: chipidea: udc: handle USB Error Interrupt if IOC not set

by Sasha Levin

From: Xu Yang <xu.yang_2(a)nxp.com> [ Upstream commit 548f48b66c0c5d4b9795a55f304b7298cde2a025 ] As per USBSTS register description about UEI: When completion of a USB transaction results in an error condition, this bit is set by the Host/Device Controller. This bit is set along with the USBINT bit, if the TD on which the error interrupt occurred also had its interrupt on complete (IOC) bit set. UI is set only when IOC set. Add checking UEI to fix miss call isr_tr_complete_handler() when IOC have not set and transfer error happen. Acked-by: Peter Chen <peter.chen(a)kernel.com> Signed-off-by: Xu Yang <xu.yang_2(a)nxp.com> Link: https://lore.kernel.org/r/20240926022906.473319-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/usb/chipidea/udc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index 6a626f41cded1..27be93d12b59c 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -1902,7 +1902,7 @@ static irqreturn_t udc_irq(struct ci_hdrc *ci) } } - if (USBi_UI & intr) + if ((USBi_UI | USBi_UEI) & intr) isr_tr_complete_handler(ci); if ((USBi_SLI & intr) && !(ci->suspended)) { -- 2.43.0

6 months, 2 weeks

2
3
0 0

[PATCH] padata: Fix refcnt handling in padata_free_shell() again

by Zach Wade

testcases/kernel/crypto/pcrypt_aead01.c of LTP project has UAF. Steps to reproduce: 1. /sys/module/cryptomgr/parameters/notests is N 2. run LTP ./testcases/bin/pcrypt_aead01 There is a race condition when padata_free_shell is released, which causes it to be accessed after being released. We should use the rcu mechanism to protect it. cpu0 | cpu1 ================================================================ padata_do_parallel | padata_free_shell rcu_read_lock_bh | refcount_dec_and_test # run to here <- 1 | # run to here <- 2 refcount_inc(&pd->refcnt); | padata_free_pd <- 3 padata_work_alloc | ... rcu_read_unlock_bh | | There is a possibility of UAF after refcount_inc(&pd->refcnt). kasan report: [158753.658839] ================================================================== [158753.658851] BUG: KASAN: slab-use-after-free in padata_find_next+0x2d6/0x3f0 [158753.658868] Read of size 4 at addr ffff88812f8b8524 by task kworker/u158:0/988818 [158753.658878] [158753.658885] CPU: 23 UID: 0 PID: 988818 Comm: kworker/u158:0 Kdump: loaded Tainted: G W E 6.12.0-dirty #33 [158753.658902] Tainted: [W]=WARN, [E]=UNSIGNED_MODULE [158753.658907] Hardware name: VMware, Inc. VMware20,1/440BX Desktop Reference Platform, BIOS VMW201.00V.20192059.B64.2207280713 07/28/2022 [158753.658914] Workqueue: pdecrypt_parallel padata_parallel_worker [158753.658927] Call Trace: [158753.658932] <TASK> [158753.658938] dump_stack_lvl+0x5d/0x80 [158753.658960] print_report+0x174/0x505 [158753.658992] kasan_report+0xe0/0x160 [158753.659013] padata_find_next+0x2d6/0x3f0 [158753.659035] padata_reorder+0x1cc/0x400 [158753.659043] padata_parallel_worker+0x70/0x160 [158753.659051] process_one_work+0x646/0xeb0 [158753.659061] worker_thread+0x619/0x10e0 [158753.659092] kthread+0x28d/0x350 [158753.659102] ret_from_fork+0x31/0x70 [158753.659111] ret_from_fork_asm+0x1a/0x30 [158753.659117] </TASK> [158753.659119] [158753.659120] Allocated by task 1027931: [158753.659123] kasan_save_stack+0x30/0x50 [158753.659126] kasan_save_track+0x14/0x30 [158753.659128] __kasan_kmalloc+0xaa/0xb0 [158753.659130] padata_alloc_pd+0x69/0x9f0 [158753.659132] padata_alloc_shell+0x82/0x210 [158753.659134] pcrypt_create+0x13b/0x7a0 [pcrypt] [158753.659139] cryptomgr_probe+0x8d/0x230 [158753.659144] kthread+0x28d/0x350 [158753.659147] ret_from_fork+0x31/0x70 [158753.659150] ret_from_fork_asm+0x1a/0x30 [158753.659152] [158753.659153] Freed by task 1024357: [158753.659155] kasan_save_stack+0x30/0x50 [158753.659158] kasan_save_track+0x14/0x30 [158753.659160] kasan_save_free_info+0x3b/0x70 [158753.659164] __kasan_slab_free+0x4f/0x70 [158753.659167] kfree+0x119/0x440 [158753.659172] padata_free_shell+0x262/0x320 [158753.659174] pcrypt_free+0x43/0x90 [pcrypt] [158753.659177] crypto_destroy_instance_workfn+0x79/0xc0 [158753.659182] process_one_work+0x646/0xeb0 [158753.659184] worker_thread+0x619/0x10e0 [158753.659186] kthread+0x28d/0x350 [158753.659188] ret_from_fork+0x31/0x70 [158753.659191] ret_from_fork_asm+0x1a/0x30 [158753.659194] [158753.659195] The buggy address belongs to the object at ffff88812f8b8500 which belongs to the cache kmalloc-192 of size 192 [158753.659198] The buggy address is located 36 bytes inside of freed 192-byte region [ffff88812f8b8500, ffff88812f8b85c0) [158753.659202] [158753.659203] The buggy address belongs to the physical page: [158753.659205] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x12f8b8 [158753.659209] head: order:1 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [158753.659212] anon flags: 0x10000000000040(head|node=0|zone=2) [158753.659216] page_type: f5(slab) [158753.659220] raw: 0010000000000040 ffff88810004c3c0 0000000000000000 dead000000000001 [158753.659223] raw: 0000000000000000 0000000080200020 00000001f5000000 0000000000000000 [158753.659225] head: 0010000000000040 ffff88810004c3c0 0000000000000000 dead000000000001 [158753.659228] head: 0000000000000000 0000000080200020 00000001f5000000 0000000000000000 [158753.659230] head: 0010000000000001 ffffea0004be2e01 ffffffffffffffff 0000000000000000 [158753.659232] head: ffff888100000002 0000000000000000 00000000ffffffff 0000000000000000 [158753.659234] page dumped because: kasan: bad access detected [158753.659235] [158753.659236] Memory state around the buggy address: [158753.659238] ffff88812f8b8400: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [158753.659240] ffff88812f8b8480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [158753.659242] >ffff88812f8b8500: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [158753.659243] ^ [158753.659245] ffff88812f8b8580: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [158753.659247] ffff88812f8b8600: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [158753.659248] ================================================================== Fixes: 07928d9bfc81 ("padata: Remove broken queue flushing") Co-developed-by: Ding Hui <dinghui(a)sangfor.com.cn> Signed-off-by: Ding Hui <dinghui(a)sangfor.com.cn> Signed-off-by: Zach Wade <zachwade.k(a)gmail.com> --- include/linux/padata.h | 1 + kernel/padata.c | 11 +++++++++-- 2 files changed, 10 insertions(+), 2 deletions(-) diff --git a/include/linux/padata.h b/include/linux/padata.h index 0146daf34430..ee6155689e47 100644 --- a/include/linux/padata.h +++ b/include/linux/padata.h @@ -103,6 +103,7 @@ struct parallel_data { int cpu; struct padata_cpumask cpumask; struct work_struct reorder_work; + struct rcu_head rcu; spinlock_t ____cacheline_aligned lock; }; diff --git a/kernel/padata.c b/kernel/padata.c index d51bbc76b227..3afdccc7e20e 100644 --- a/kernel/padata.c +++ b/kernel/padata.c @@ -1109,6 +1109,14 @@ struct padata_shell *padata_alloc_shell(struct padata_instance *pinst) } EXPORT_SYMBOL(padata_alloc_shell); +static void __padata_put_pd(struct rcu_head *head) +{ + struct parallel_data *pd = container_of(head, struct parallel_data, rcu); + + if (refcount_dec_and_test(&pd->refcnt)) + padata_free_pd(pd); +} + /** * padata_free_shell - free a padata shell * @@ -1124,9 +1132,8 @@ void padata_free_shell(struct padata_shell *ps) mutex_lock(&ps->pinst->lock); list_del(&ps->list); pd = rcu_dereference_protected(ps->pd, 1); - if (refcount_dec_and_test(&pd->refcnt)) - padata_free_pd(pd); mutex_unlock(&ps->pinst->lock); + call_rcu(&pd->rcu, __padata_put_pd); kfree(ps); } -- 2.46.0

6 months, 2 weeks

3
2
0 0

[PATCH v3] ARM: dts: ti/omap: gta04: fix pm issues caused by spi module

by Andreas Kemnade

Despite CM_IDLEST1_CORE and CM_FCLKEN1_CORE behaving normal, disabling SPI leads to messages like when suspending: Powerdomain (core_pwrdm) didn't enter target state 0 and according to /sys/kernel/debug/pm_debug/count off state is not entered. That was not connected to SPI during the discussion of disabling SPI. See: https://lore.kernel.org/linux-omap/20230122100852.32ae082c@aktux/ The reason is that SPI is per default in slave mode. Linux driver will turn it to master per default. It slave mode, the powerdomain seems to be kept active if active chip select input is sensed. Fix that by explicitly disabling the SPI3 pins which used to be muxed by the bootloader since they are available on an optionally fitted header which would require dtb overlays anyways. Fixes: a622310f7f01 ("ARM: dts: gta04: fix excess dma channel usage") CC: stable(a)vger.kernel.org Signed-off-by: Andreas Kemnade <andreas(a)kemnade.info> --- Changes in V3: - use gpio mode instead of mode7 which is not safe mode in this special case Changes in V2: - instead of reenabling mcspi, do a fix more near the root of the problem arch/arm/boot/dts/ti/omap/omap3-gta04.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm/boot/dts/ti/omap/omap3-gta04.dtsi b/arch/arm/boot/dts/ti/omap/omap3-gta04.dtsi index 2ee3ddd640209..536070e80b2c6 100644 --- a/arch/arm/boot/dts/ti/omap/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/ti/omap/omap3-gta04.dtsi @@ -446,6 +446,7 @@ &omap3_pmx_core2 { pinctrl-names = "default"; pinctrl-0 = < &hsusb2_2_pins + &mcspi3hog_pins >; hsusb2_2_pins: hsusb2-2-pins { @@ -459,6 +460,15 @@ OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_d >; }; + mcspi3hog_pins: mcspi3hog-pins { + pinctrl-single,pins = < + OMAP3630_CORE2_IOPAD(0x25dc, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* etk_d0 */ + OMAP3630_CORE2_IOPAD(0x25de, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* etk_d1 */ + OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* etk_d2 */ + OMAP3630_CORE2_IOPAD(0x25e2, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* etk_d3 */ + >; + }; + spi_gpio_pins: spi-gpio-pinmux-pins { pinctrl-single,pins = < OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE4) /* clk */ -- 2.39.2

6 months, 2 weeks

3
2
0 0

[PATCH v2] ARM: dts: dra7: Add bus_dma_limit for l4 cfg bus

by Romain Naour

From: Romain Naour <romain.naour(a)skf.com> A bus_dma_limit was added for l3 bus by commit cfb5d65f2595 ("ARM: dts: dra7: Add bus_dma_limit for L3 bus") to fix an issue observed only with SATA on DRA7-EVM with 4GB RAM and CONFIG_ARM_LPAE enabled. Since kernel 5.13, the SATA issue can be reproduced again following the SATA node move from L3 bus to L4_cfg in commit 8af15365a368 ("ARM: dts: Configure interconnect target module for dra7 sata"). Fix it by adding an empty dma-ranges property to l4_cfg and segment@100000 nodes (parent device tree node of SATA controller) to inherit the 2GB dma ranges limit from l3 bus node. Note: A similar fix was applied for PCIe controller by commit 90d4d3f4ea45 ("ARM: dts: dra7: Fix bus_dma_limit for PCIe"). Fixes: 8af15365a368 ("ARM: dts: Configure interconnect target module for dra7 sata"). Link: https://lore.kernel.org/linux-omap/c583e1bb-f56b-4489-8012-ce742e85f233@smi… Cc: <stable(a)vger.kernel.org> # 5.13 Signed-off-by: Romain Naour <romain.naour(a)skf.com> --- v2: add stable tag --- arch/arm/boot/dts/ti/omap/dra7-l4.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi b/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi index 6e67d99832ac..ba7fdaae9c6e 100644 --- a/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi +++ b/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi @@ -12,6 +12,7 @@ &l4_cfg { /* 0x4a000000 */ ranges = <0x00000000 0x4a000000 0x100000>, /* segment 0 */ <0x00100000 0x4a100000 0x100000>, /* segment 1 */ <0x00200000 0x4a200000 0x100000>; /* segment 2 */ + dma-ranges; segment@0 { /* 0x4a000000 */ compatible = "simple-pm-bus"; @@ -557,6 +558,7 @@ segment@100000 { /* 0x4a100000 */ <0x0007e000 0x0017e000 0x001000>, /* ap 124 */ <0x00059000 0x00159000 0x001000>, /* ap 125 */ <0x0005a000 0x0015a000 0x001000>; /* ap 126 */ + dma-ranges; target-module@2000 { /* 0x4a102000, ap 27 3c.0 */ compatible = "ti,sysc"; -- 2.45.0

6 months, 2 weeks

2
1
0 0

[PATCH] cpufreq: fix using cpufreq-dt as module

by Andreas Kemnade

E.g. omap2plus_defconfig compiles cpufreq-dt as module. As there is no module alias nor a module_init(), cpufreq-dt-platdev will not be used and therefore on several omap platforms there is no cpufreq. Enforce builtin compile of cpufreq-dt-platdev to make it effective. Fixes: 3b062a086984 ("cpufreq: dt-platdev: Support building as module") Cc: stable(a)vger.kernel.org Signed-off-by: Andreas Kemnade <andreas(a)kemnade.info> --- drivers/cpufreq/Kconfig | 2 +- drivers/cpufreq/cpufreq-dt-platdev.c | 2 -- 2 files changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig index 2561b215432a8..4547adf5d2a7d 100644 --- a/drivers/cpufreq/Kconfig +++ b/drivers/cpufreq/Kconfig @@ -218,7 +218,7 @@ config CPUFREQ_DT If in doubt, say N. config CPUFREQ_DT_PLATDEV - tristate "Generic DT based cpufreq platdev driver" + bool "Generic DT based cpufreq platdev driver" depends on OF help This adds a generic DT based cpufreq platdev driver for frequency diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c index 18942bfe9c95f..78ad3221fe077 100644 --- a/drivers/cpufreq/cpufreq-dt-platdev.c +++ b/drivers/cpufreq/cpufreq-dt-platdev.c @@ -234,5 +234,3 @@ static int __init cpufreq_dt_platdev_init(void) sizeof(struct cpufreq_dt_platform_data))); } core_initcall(cpufreq_dt_platdev_init); -MODULE_DESCRIPTION("Generic DT based cpufreq platdev driver"); -MODULE_LICENSE("GPL"); -- 2.39.2

6 months, 2 weeks

3
4
0 0

[PATCH] nvme-pci: Remove O2 Queue Depth quirk

by Gwendal Grignou

PCI_DEVICE(0x1217, 0x8760) (O2 Micro, Inc. FORESEE E2M2 NVMe SSD) is a NMVe to eMMC bridge, that can be used with different eMMC memory devices. The NVMe device name contains the eMMC device name, for instance: `BAYHUB SanDisk-DA4128-91904055-128GB` The bridge is known to work with many eMMC devices, we need to limit the queue depth once we know which eMMC device is behind the bridge. Fixes: commit 83bdfcbdbe5d ("nvme-pci: qdepth 1 quirk") Cc: stable(a)vger.kernel.org Signed-off-by: Gwendal Grignou <gwendal(a)chromium.org> --- drivers/nvme/host/pci.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index 4b9fda0b1d9a3..1c908e129fddf 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -3448,8 +3448,6 @@ static const struct pci_device_id nvme_id_table[] = { NVME_QUIRK_BOGUS_NID, }, { PCI_VDEVICE(REDHAT, 0x0010), /* Qemu emulated controller */ .driver_data = NVME_QUIRK_BOGUS_NID, }, - { PCI_DEVICE(0x1217, 0x8760), /* O2 Micro 64GB Steam Deck */ - .driver_data = NVME_QUIRK_QDEPTH_ONE }, { PCI_DEVICE(0x126f, 0x2262), /* Silicon Motion generic */ .driver_data = NVME_QUIRK_NO_DEEPEST_PS | NVME_QUIRK_BOGUS_NID, }, -- 2.47.0.163.g1226f6d8fa-goog

6 months, 2 weeks

5
7
0 0

[PATCH v1] selftests/memfd: Run sysctl tests when PID namespace support is enabled

by Isaac J. Manjarres

The sysctl tests for vm.memfd_noexec rely on the kernel to support PID namespaces (i.e. the kernel is built with CONFIG_PID_NS=y). If the kernel the test runs on does not support PID namespaces, the first sysctl test will fail when attempting to spawn a new thread in a new PID namespace, abort the test, preventing the remaining tests from being run. This is not desirable, as not all kernels need PID namespaces, but can still use the other features provided by memfd. Therefore, only run the sysctl tests if the kernel supports PID namespaces. Otherwise, skip those tests and emit an informative message to let the user know why the sysctl tests are not being run. Fixes: 11f75a01448f ("selftests/memfd: add tests for MFD_NOEXEC_SEAL MFD_EXEC") Cc: stable(a)vger.kernel.org # v6.6+ Cc: Jeff Xu <jeffxu(a)google.com> Cc: Suren Baghdasaryan <surenb(a)google.com> Cc: Kalesh Singh <kaleshsingh(a)google.com> Signed-off-by: Isaac J. Manjarres <isaacmanjarres(a)google.com> --- tools/testing/selftests/memfd/memfd_test.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/memfd/memfd_test.c b/tools/testing/selftests/memfd/memfd_test.c index 95af2d78fd31..0a0b55516028 100644 --- a/tools/testing/selftests/memfd/memfd_test.c +++ b/tools/testing/selftests/memfd/memfd_test.c @@ -9,6 +9,7 @@ #include <fcntl.h> #include <linux/memfd.h> #include <sched.h> +#include <stdbool.h> #include <stdio.h> #include <stdlib.h> #include <signal.h> @@ -1557,6 +1558,11 @@ static void test_share_fork(char *banner, char *b_suffix) close(fd); } +static bool pid_ns_supported(void) +{ + return access("/proc/self/ns/pid", F_OK) == 0; +} + int main(int argc, char **argv) { pid_t pid; @@ -1591,8 +1597,12 @@ int main(int argc, char **argv) test_seal_grow(); test_seal_resize(); - test_sysctl_simple(); - test_sysctl_nested(); + if (pid_ns_supported()) { + test_sysctl_simple(); + test_sysctl_nested(); + } else { + printf("PID namespaces are not supported; skipping sysctl tests\n"); + } test_share_dup("SHARE-DUP", ""); test_share_mmap("SHARE-MMAP", ""); -- 2.47.0.338.g60cca15819-goog

6 months, 2 weeks

2
1
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror December 2024