March 2024 - Linux-stable-mirror

[PATCH v2] usb: typec: tpcm: Fix PORT_RESET behavior for self powered devices

by Badhri Jagan Sridharan

While commit 69f89168b310 ("usb: typec: tpcm: Fix issues with power being removed during reset") fixes the boot issues for bus powered devices such as LibreTech Renegade Elite/Firefly, it trades off the CC pins NOT being Hi-Zed during errory recovery (i.e PORT_RESET) for devices which are NOT bus powered(a.k.a self powered). This change Hi-Zs the CC pins only for self powered devices, thus preventing brown out for bus powered devices Adhering to spec is gaining more importance due to the Common charger initiative enforced by the European Union. Quoting from the spec: 4.5.2.2.2.1 ErrorRecovery State Requirements The port shall not drive VBUS or VCONN, and shall present a high-impedance to ground (above zOPEN) on its CC1 and CC2 pins. Hi-Zing the CC pins is the inteded behavior for PORT_RESET. CC pins are set to default state after tErrorRecovery in PORT_RESET_WAIT_OFF. 4.5.2.2.2.2 Exiting From ErrorRecovery State A Sink shall transition to Unattached.SNK after tErrorRecovery. A Source shall transition to Unattached.SRC after tErrorRecovery. Fixes: 69f89168b310 ("usb: typec: tpcm: Fix issues with power being removed during reset") Cc: stable(a)vger.kernel.org Cc: Mark Brown <broonie(a)kernel.org> Signed-off-by: Badhri Jagan Sridharan <badhri(a)google.com> --- Changes since V1: * Fix CC for linux stable --- drivers/usb/typec/tcpm/tcpm.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index c9a78f55ca48..bbe1381232eb 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -5593,8 +5593,11 @@ static void run_state_machine(struct tcpm_port *port) break; case PORT_RESET: tcpm_reset_port(port); - tcpm_set_cc(port, tcpm_default_state(port) == SNK_UNATTACHED ? - TYPEC_CC_RD : tcpm_rp_cc(port)); + if (port->self_powered) + tcpm_set_cc(port, TYPEC_CC_OPEN); + else + tcpm_set_cc(port, tcpm_default_state(port) == SNK_UNATTACHED ? + TYPEC_CC_RD : tcpm_rp_cc(port)); tcpm_set_state(port, PORT_RESET_WAIT_OFF, PD_T_ERROR_RECOVERY); break; base-commit: a560a5672826fc1e057068bda93b3d4c98d037a2 -- 2.44.0.rc1.240.g4c46232300-goog

12 months

3
2
0 0

6.5.0 broke XHCI URB submissions for count >512

by Chris Yokum

We have found a regression bug, where more than 512 URBs cannot be reliably submitted to XHCI. URBs beyond that return 0x00 instead of valid data in the buffer. Our software works reliably on kernel versions through 6.4.x and fails on versions 6.5, 6.6, 6.7, and 6.8.0-rc6. This was discovered when Ubuntu recently updated their latest kernel package to version 6.5. The issue is limited to the XHCI driver and appears to be isolated to this specific commit: [ https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/d… | https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/d… ] Attached is a test program that demonstrates the problem. We used a few different USB-to-Serial adapters with no driver installed as a convenient way to reproduce. We check the TRB debug information before and after to verify the actual number of allocated TRBs. With some adapters on unaffected kernels, the TRB map gets expanded correctly. This directly corresponds to correct functional behavior. On affected kernels, the TRB ring does not expand, and our functional tests also will fail. We don't know exactly why this happens. Some adapters do work correctly, so there seems to also be some subtle problem that was being masked by the liberal expansion of the TRB ring in older kernels. We also saw on one system that the TRB expansion did work correctly with one particular adapter. However, on all systems at least two adapters did exhibit the problem and fail. Would it be possible to resolve this regression for the 6.8 release and backport the fix to versions 6.5, 6.6, and 6.7? #regzbot ^introduced: f5af638f0609af889f15c700c60b93c06cc76675

12 months

4
8
0 0

[char-misc-next] mei: me: disable RPL-S on SPS and IGN firmwares

by Tomas Winkler

From: Alexander Usyskin <alexander.usyskin(a)intel.com> Extend the quirk to disable MEI interface on Intel PCH Ignition (IGN) and SPS firmwares for RPL-S devices. These firmwares do not support the MEI protocol. Fixes: 3ed8c7d39cfe ("mei: me: add raptor lake point S DID") Cc: <stable(a)vger.kernel.org> Signed-off-by: Alexander Usyskin <alexander.usyskin(a)intel.com> Signed-off-by: Tomas Winkler <tomas.winkler(a)intel.com> --- drivers/misc/mei/pci-me.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c index 1f0d983d3f06e5385b30592b..9b8021eb7ab5f8eefdb89ab1 100644 --- a/drivers/misc/mei/pci-me.c +++ b/drivers/misc/mei/pci-me.c @@ -116,7 +116,7 @@ static const struct pci_device_id mei_me_pci_tbl[] = { {MEI_PCI_DEVICE(MEI_DEV_ID_ADP_P, MEI_ME_PCH15_CFG)}, {MEI_PCI_DEVICE(MEI_DEV_ID_ADP_N, MEI_ME_PCH15_CFG)}, - {MEI_PCI_DEVICE(MEI_DEV_ID_RPL_S, MEI_ME_PCH15_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_RPL_S, MEI_ME_PCH15_SPS_CFG)}, {MEI_PCI_DEVICE(MEI_DEV_ID_MTL_M, MEI_ME_PCH15_CFG)}, -- 2.44.0

1 year

1
0
0 0

[PATCH] Bluetooth: Add device 0bda:4853 to blacklist/quirk table

by WangYuli

This new device is part of a Realtek RTW8852BE chip. Without this change the device utilizes an obsolete version of the firmware that is encoded in it rather than the updated Realtek firmware and config files from the firmware directory. The latter files implement many new features. The device table is as follows: T: Bus=03 Lev=01 Prnt=01 Port=09 Cnt=03 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=4853 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Link: https://lore.kernel.org/all/20230810144507.9599-1-Larry.Finger@lwfinger.net/ Cc: stable(a)vger.kernel.org Signed-off-by: Larry Finger <Larry.Finger(a)lwfinger.net> Signed-off-by: WangYuli <wangyuli(a)uniontech.com> --- drivers/bluetooth/btusb.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 06e915b57283..d9c621d15fee 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -542,6 +542,8 @@ static const struct usb_device_id quirks_table[] = { /* Realtek 8852BE Bluetooth devices */ { USB_DEVICE(0x0cb8, 0xc559), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0bda, 0x4853), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0bda, 0x887b), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0bda, 0xb85b), .driver_info = BTUSB_REALTEK | -- 2.43.0

1 year

1
0
0 0

[PATCH v5.10 0/2] v5.10 backports for CVE-2023-52447

by Robert Kolchmeyer

Hi all, This patch series includes backports for the changes that fix CVE-2023-52447. The changes were applied cleanly from my 5.15 backport, viewable at https://lore.kernel.org/stable/cover.1710187165.git.rkolchmeyer@google.com/…. The notes in that patch set largely apply here. The only note I have for 5.10 is that the test cases with sleepable BPF programs in commit 1624918be84a ("selftests/bpf: Add test cases for inner map") do not seem to be compatible with the 5.10 kernel. But the situation with the other test cases matches the observations I shared in the 5.15 patch set. Thanks, -Robert Hou Tao (1): bpf: Defer the free of inner map when necessary Paul E. McKenney (1): rcu-tasks: Provide rcu_trace_implies_rcu_gp() include/linux/bpf.h | 7 ++++++- include/linux/rcupdate.h | 12 ++++++++++++ kernel/bpf/map_in_map.c | 11 ++++++++--- kernel/bpf/syscall.c | 26 ++++++++++++++++++++++++-- kernel/rcu/tasks.h | 2 ++ 5 files changed, 52 insertions(+), 6 deletions(-) -- 2.44.0.278.ge034bb2e1d-goog

1 year

1
2
0 0

[PATCH -v3] mm: swap: fix race between free_swap_and_cache() and swapoff()

by Huang Ying

From: Ryan Roberts <ryan.roberts(a)arm.com> There was previously a theoretical window where swapoff() could run and teardown a swap_info_struct while a call to free_swap_and_cache() was running in another thread. This could cause, amongst other bad possibilities, swap_page_trans_huge_swapped() (called by free_swap_and_cache()) to access the freed memory for swap_map. This is a theoretical problem and I haven't been able to provoke it from a test case. But there has been agreement based on code review that this is possible (see link below). Fix it by using get_swap_device()/put_swap_device(), which will stall swapoff(). There was an extra check in _swap_info_get() to confirm that the swap entry was not free. This isn't present in get_swap_device() because it doesn't make sense in general due to the race between getting the reference and swapoff. So I've added an equivalent check directly in free_swap_and_cache(). Details of how to provoke one possible issue: --8<----- CPU0 CPU1 ---- ---- shmem_undo_range shmem_free_swap xa_cmpxchg_irq free_swap_and_cache __swap_entry_free /* swap_count() become 0 */ swapoff try_to_unuse shmem_unuse /* cannot find swap entry */ find_next_to_unuse filemap_get_folio folio_free_swap /* remove swap cache */ /* free si->swap_map[] */ swap_page_trans_huge_swapped <-- access freed si->swap_map !!! --8<----- Link: https://lkml.kernel.org/r/20240306140356.3974886-1-ryan.roberts@arm.com Closes: https://lore.kernel.org/linux-mm/8734t27awd.fsf@yhuang6-desk2.ccr.corp.inte… Signed-off-by: Ryan Roberts <ryan.roberts(a)arm.com> Signed-off-by: "Huang, Ying" <ying.huang(a)intel.com> [patch description] Cc: David Hildenbrand <david(a)redhat.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- Hi, Andrew, If it's not too late. Please replace v2 of this patch in mm-stable with this version. Changes since v2: - Remove comments for get_swap_device() because it's not correct. - Revised patch description about the race condition description. Changes since v1: - Added comments for get_swap_device() as suggested by David - Moved check that swap entry is not free from get_swap_device() to free_swap_and_cache() since there are some paths that legitimately call with a free offset. Best Regards, Huang, Ying mm/swapfile.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/mm/swapfile.c b/mm/swapfile.c index 2b3a2d85e350..9e0691276f5e 100644 --- a/mm/swapfile.c +++ b/mm/swapfile.c @@ -1609,13 +1609,19 @@ int free_swap_and_cache(swp_entry_t entry) if (non_swap_entry(entry)) return 1; - p = _swap_info_get(entry); + p = get_swap_device(entry); if (p) { + if (WARN_ON(data_race(!p->swap_map[swp_offset(entry)]))) { + put_swap_device(p); + return 0; + } + count = __swap_entry_free(p, entry); if (count == SWAP_HAS_CACHE && !swap_page_trans_huge_swapped(p, entry)) __try_to_reclaim_swap(p, swp_offset(entry), TTRS_UNMAPPED | TTRS_FULL); + put_swap_device(p); } return p != NULL; } -- 2.39.2

1 year

3
2
0 0

[PATCH AUTOSEL 5.15 1/9] RDMA/mlx5: Fix fortify source warning while accessing Eth segment

by Sasha Levin

From: Leon Romanovsky <leonro(a)nvidia.com> [ Upstream commit 4d5e86a56615cc387d21c629f9af8fb0e958d350 ] ------------[ cut here ]------------ memcpy: detected field-spanning write (size 56) of single field "eseg->inline_hdr.start" at /var/lib/dkms/mlnx-ofed-kernel/5.8/build/drivers/infiniband/hw/mlx5/wr.c:131 (size 2) WARNING: CPU: 0 PID: 293779 at /var/lib/dkms/mlnx-ofed-kernel/5.8/build/drivers/infiniband/hw/mlx5/wr.c:131 mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] Modules linked in: 8021q garp mrp stp llc rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) ib_uverbs(OE) ib_core(OE) mlx5_core(OE) pci_hyperv_intf mlxdevm(OE) mlx_compat(OE) tls mlxfw(OE) psample nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables libcrc32c nfnetlink mst_pciconf(OE) knem(OE) vfio_pci vfio_pci_core vfio_iommu_type1 vfio iommufd irqbypass cuse nfsv3 nfs fscache netfs xfrm_user xfrm_algo ipmi_devintf ipmi_msghandler binfmt_misc crct10dif_pclmul crc32_pclmul polyval_clmulni polyval_generic ghash_clmulni_intel sha512_ssse3 snd_pcsp aesni_intel crypto_simd cryptd snd_pcm snd_timer joydev snd soundcore input_leds serio_raw evbug nfsd auth_rpcgss nfs_acl lockd grace sch_fq_codel sunrpc drm efi_pstore ip_tables x_tables autofs4 psmouse virtio_net net_failover failover floppy [last unloaded: mlx_compat(OE)] CPU: 0 PID: 293779 Comm: ssh Tainted: G OE 6.2.0-32-generic #32~22.04.1-Ubuntu Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] Code: 0c 01 00 a8 01 75 25 48 8b 75 a0 b9 02 00 00 00 48 c7 c2 10 5b fd c0 48 c7 c7 80 5b fd c0 c6 05 57 0c 03 00 01 e8 95 4d 93 da <0f> 0b 44 8b 4d b0 4c 8b 45 c8 48 8b 4d c0 e9 49 fb ff ff 41 0f b7 RSP: 0018:ffffb5b48478b570 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffb5b48478b628 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffb5b48478b5e8 R13: ffff963a3c609b5e R14: ffff9639c3fbd800 R15: ffffb5b480475a80 FS: 00007fc03b444c80(0000) GS:ffff963a3dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000556f46bdf000 CR3: 0000000006ac6003 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? show_regs+0x72/0x90 ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] ? __warn+0x8d/0x160 ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] ? report_bug+0x1bb/0x1d0 ? handle_bug+0x46/0x90 ? exc_invalid_op+0x19/0x80 ? asm_exc_invalid_op+0x1b/0x20 ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] mlx5_ib_post_send_nodrain+0xb/0x20 [mlx5_ib] ipoib_send+0x2ec/0x770 [ib_ipoib] ipoib_start_xmit+0x5a0/0x770 [ib_ipoib] dev_hard_start_xmit+0x8e/0x1e0 ? validate_xmit_skb_list+0x4d/0x80 sch_direct_xmit+0x116/0x3a0 __dev_xmit_skb+0x1fd/0x580 __dev_queue_xmit+0x284/0x6b0 ? _raw_spin_unlock_irq+0xe/0x50 ? __flush_work.isra.0+0x20d/0x370 ? push_pseudo_header+0x17/0x40 [ib_ipoib] neigh_connected_output+0xcd/0x110 ip_finish_output2+0x179/0x480 ? __smp_call_single_queue+0x61/0xa0 __ip_finish_output+0xc3/0x190 ip_finish_output+0x2e/0xf0 ip_output+0x78/0x110 ? __pfx_ip_finish_output+0x10/0x10 ip_local_out+0x64/0x70 __ip_queue_xmit+0x18a/0x460 ip_queue_xmit+0x15/0x30 __tcp_transmit_skb+0x914/0x9c0 tcp_write_xmit+0x334/0x8d0 tcp_push_one+0x3c/0x60 tcp_sendmsg_locked+0x2e1/0xac0 tcp_sendmsg+0x2d/0x50 inet_sendmsg+0x43/0x90 sock_sendmsg+0x68/0x80 sock_write_iter+0x93/0x100 vfs_write+0x326/0x3c0 ksys_write+0xbd/0xf0 ? do_syscall_64+0x69/0x90 __x64_sys_write+0x19/0x30 do_syscall_64+0x59/0x90 ? do_user_addr_fault+0x1d0/0x640 ? exit_to_user_mode_prepare+0x3b/0xd0 ? irqentry_exit_to_user_mode+0x9/0x20 ? irqentry_exit+0x43/0x50 ? exc_page_fault+0x92/0x1b0 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7fc03ad14a37 Code: 10 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 RSP: 002b:00007ffdf8697fe8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000008024 RCX: 00007fc03ad14a37 RDX: 0000000000008024 RSI: 0000556f46bd8270 RDI: 0000000000000003 RBP: 0000556f46bb1800 R08: 0000000000007fe3 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000002 R13: 0000556f46bc66b0 R14: 000000000000000a R15: 0000556f46bb2f50 </TASK> ---[ end trace 0000000000000000 ]--- Link: https://lore.kernel.org/r/8228ad34bd1a25047586270f7b1fb4ddcd046282.17064339… Signed-off-by: Leon Romanovsky <leonro(a)nvidia.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/infiniband/hw/mlx5/wr.c | 2 +- include/linux/mlx5/qp.h | 5 ++++- 2 files changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/hw/mlx5/wr.c b/drivers/infiniband/hw/mlx5/wr.c index 8841620af82f1..b81d282fb0d52 100644 --- a/drivers/infiniband/hw/mlx5/wr.c +++ b/drivers/infiniband/hw/mlx5/wr.c @@ -128,7 +128,7 @@ static void set_eth_seg(const struct ib_send_wr *wr, struct mlx5_ib_qp *qp, */ copysz = min_t(u64, *cur_edge - (void *)eseg->inline_hdr.start, left); - memcpy(eseg->inline_hdr.start, pdata, copysz); + memcpy(eseg->inline_hdr.data, pdata, copysz); stride = ALIGN(sizeof(struct mlx5_wqe_eth_seg) - sizeof(eseg->inline_hdr.start) + copysz, 16); *size += stride / 16; diff --git a/include/linux/mlx5/qp.h b/include/linux/mlx5/qp.h index 61e48d459b23c..693d758f2f1c9 100644 --- a/include/linux/mlx5/qp.h +++ b/include/linux/mlx5/qp.h @@ -261,7 +261,10 @@ struct mlx5_wqe_eth_seg { union { struct { __be16 sz; - u8 start[2]; + union { + u8 start[2]; + DECLARE_FLEX_ARRAY(u8, data); + }; } inline_hdr; struct { __be16 type; -- 2.43.0

1 year

2
9
0 0

[PATCH v4 0/9] x86/sev: KEXEC/KDUMP support for SEV-ES guests

by Vasant Karasulli

From: Vasant Karasulli <vkarasulli(a)suse.de> Hi, here are changes to enable kexec/kdump in SEV-ES guests. The biggest problem for supporting kexec/kdump under SEV-ES is to find a way to hand the non-boot CPUs (APs) from one kernel to another. Without SEV-ES the first kernel parks the CPUs in a HLT loop until they get reset by the kexec'ed kernel via an INIT-SIPI-SIPI sequence. For virtual machines the CPU reset is emulated by the hypervisor, which sets the vCPU registers back to reset state. This does not work under SEV-ES, because the hypervisor has no access to the vCPU registers and can't make modifications to them. So an SEV-ES guest needs to reset the vCPU itself and park it using the AP-reset-hold protocol. Upon wakeup the guest needs to jump to real-mode and to the reset-vector configured in the AP-Jump-Table. The code to do this is the main part of this patch-set. It works by placing code on the AP Jump-Table page itself to park the vCPU and for jumping to the reset vector upon wakeup. The code on the AP Jump Table runs in 16-bit protected mode with segment base set to the beginning of the page. The AP Jump-Table is usually not within the first 1MB of memory, so the code can't run in real-mode. The AP Jump-Table is the best place to put the parking code, because the memory is owned, but read-only by the firmware and writeable by the OS. Only the first 4 bytes are used for the reset-vector, leaving the rest of the page for code/data/stack to park a vCPU. The code can't be in kernel memory because by the time the vCPU wakes up the memory will be owned by the new kernel, which might have overwritten it already. The other patches add initial GHCB Version 2 protocol support, because kexec/kdump need the MSR-based (without a GHCB) AP-reset-hold VMGEXIT, which is a GHCB protocol version 2 feature. The kexec'ed kernel is also entered via the decompressor and needs MMIO support there, so this patch-set also adds MMIO #VC support to the decompressor and support for handling CLFLUSH instructions. Finally there is also code to disable kexec/kdump support at runtime when the environment does not support it (e.g. no GHCB protocol version 2 support or AP Jump Table over 4GB). The diffstat looks big, but most of it is moving code for MMIO #VC support around to make it available to the decompressor. The previous version of this patch-set can be found here: https://lore.kernel.org/lkml/20220127101044.13803-1-joro@8bytes.org/ Please review. Thanks, Vasant Changes v3->v4: - Rebased to v6.8 kernel - Applied review comments by Sean Christopherson - Combined sev_es_setup_ap_jump_table() and sev_setup_ap_jump_table() into a single function which makes caching jump table address unnecessary - annotated struct sev_ap_jump_table_header with __packed attribute - added code to set up real mode data segment at boot time instead of hardcoding the value. Changes v2->v3: - Rebased to v5.17-rc1 - Applied most review comments by Boris - Use the name 'AP jump table' consistently - Make kexec-disabling for unsupported guests x86-specific - Cleanup and consolidate patches to detect GHCB v2 protocol support Joerg Roedel (9): x86/kexec/64: Disable kexec when SEV-ES is active x86/sev: Save and print negotiated GHCB protocol version x86/sev: Set GHCB data structure version x86/sev: Setup code to park APs in the AP Jump Table x86/sev: Park APs on AP Jump Table with GHCB protocol version 2 x86/sev: Use AP Jump Table blob to stop CPU x86/sev: Add MMIO handling support to boot/compressed/ code x86/sev: Handle CLFLUSH MMIO events x86/kexec/64: Support kexec under SEV-ES with AP Jump Table Blob arch/x86/boot/compressed/sev.c | 45 +- arch/x86/include/asm/insn-eval.h | 1 + arch/x86/include/asm/realmode.h | 5 + arch/x86/include/asm/sev-ap-jumptable.h | 30 + arch/x86/include/asm/sev.h | 7 + arch/x86/kernel/machine_kexec_64.c | 12 + arch/x86/kernel/process.c | 8 + arch/x86/kernel/sev-shared.c | 234 +++++- arch/x86/kernel/sev.c | 372 +++++----- arch/x86/lib/insn-eval-shared.c | 912 ++++++++++++++++++++++++ arch/x86/lib/insn-eval.c | 911 +---------------------- arch/x86/realmode/Makefile | 9 +- arch/x86/realmode/rm/Makefile | 11 +- arch/x86/realmode/rm/header.S | 3 + arch/x86/realmode/rm/sev.S | 85 +++ arch/x86/realmode/rmpiggy.S | 6 + arch/x86/realmode/sev/Makefile | 33 + arch/x86/realmode/sev/ap_jump_table.S | 131 ++++ arch/x86/realmode/sev/ap_jump_table.lds | 24 + 19 files changed, 1695 insertions(+), 1144 deletions(-) create mode 100644 arch/x86/include/asm/sev-ap-jumptable.h create mode 100644 arch/x86/lib/insn-eval-shared.c create mode 100644 arch/x86/realmode/rm/sev.S create mode 100644 arch/x86/realmode/sev/Makefile create mode 100644 arch/x86/realmode/sev/ap_jump_table.S create mode 100644 arch/x86/realmode/sev/ap_jump_table.lds base-commit: e8f897f4afef0031fe618a8e94127a0934896aba -- 2.34.1

1 year

3
10
0 0

[PATCH 5.15.y 0/7] Delay VERW 5.15.y backport

by Pawan Gupta

This is the backport of recently upstreamed series that moves VERW execution to a later point in exit-to-user path. This is needed because in some cases it may be possible for data accessed after VERW executions may end into MDS affected CPU buffers. Moving VERW closer to ring transition reduces the attack surface. - The series includes a dependency commit f87bc8dc7a7c ("x86/asm: Add _ASM_RIP() macro for x86-64 (%rip) suffix"). - Patch 2 includes a change that adds runtime patching for jmp (instead of verw in original series) due to lack of rip-relative relocation support in kernels <v6.5. - Fixed warning: arch/x86/entry/entry.o: warning: objtool: mds_verw_sel+0x0: unreachable instruction. - Resolved merge conflicts in: swapgs_restore_regs_and_return_to_usermode in entry_64.S. __vmx_vcpu_run in vmenter.S. vmx_update_fb_clear_dis in vmx.c. - Boot tested with KASLR and KPTI enabled. - Verified VERW being executed with mitigation ON, and not being executed with mitigation turned OFF. To: stable(a)vger.kernel.org Signed-off-by: Pawan Gupta <pawan.kumar.gupta(a)linux.intel.com> --- H. Peter Anvin (Intel) (1): x86/asm: Add _ASM_RIP() macro for x86-64 (%rip) suffix Pawan Gupta (5): x86/bugs: Add asm helpers for executing VERW x86/entry_64: Add VERW just before userspace transition x86/entry_32: Add VERW just before userspace transition x86/bugs: Use ALTERNATIVE() instead of mds_user_clear static key KVM/VMX: Move VERW closer to VMentry for MDS mitigation Sean Christopherson (1): KVM/VMX: Use BT+JNC, i.e. EFLAGS.CF to select VMRESUME vs. VMLAUNCH Documentation/x86/mds.rst | 38 +++++++++++++++++++++++++----------- arch/x86/entry/entry.S | 23 ++++++++++++++++++++++ arch/x86/entry/entry_32.S | 3 +++ arch/x86/entry/entry_64.S | 11 +++++++++++ arch/x86/entry/entry_64_compat.S | 1 + arch/x86/include/asm/asm.h | 5 +++++ arch/x86/include/asm/cpufeatures.h | 2 +- arch/x86/include/asm/entry-common.h | 1 - arch/x86/include/asm/nospec-branch.h | 27 +++++++++++++------------ arch/x86/kernel/cpu/bugs.c | 15 ++++++-------- arch/x86/kernel/nmi.c | 3 --- arch/x86/kvm/vmx/run_flags.h | 7 +++++-- arch/x86/kvm/vmx/vmenter.S | 9 ++++++--- arch/x86/kvm/vmx/vmx.c | 12 ++++++++---- 14 files changed, 111 insertions(+), 46 deletions(-) --- base-commit: 80efc6265290d34b75921bf7294e0d9c5a8749dc change-id: 20240304-delay-verw-backport-5-15-y-e16f07fbb71e Best regards, -- Thanks, Pawan

1 year

1
9
0 0

[PATCH AUTOSEL 4.19 1/5] ASoC: Intel: bytcr_rt5640: Add an extra entry for the Chuwi Vi8 tablet

by Sasha Levin

From: Alban Boyé <alban.boye(a)protonmail.com> [ Upstream commit f8b0127aca8c60826e7354e504a12d4a46b1c3bb ] The bios version can differ depending if it is a dual-boot variant of the tablet. Therefore another DMI match is required. Signed-off-by: Alban Boyé <alban.boye(a)protonmail.com> Reviewed-by: Cezary Rojewski <cezary.rojewski(a)intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Link: https://msgid.link/r/20240228192807.15130-1-alban.boye@protonmail.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/intel/boards/bytcr_rt5640.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index d27dd170bedaf..19f425eb4a40f 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -523,6 +523,18 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { BYT_RT5640_SSP0_AIF1 | BYT_RT5640_MCLK_EN), }, + { /* Chuwi Vi8 dual-boot (CWI506) */ + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Insyde"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "i86"), + /* The above are too generic, also match BIOS info */ + DMI_MATCH(DMI_BIOS_VERSION, "CHUWI2.D86JHBNR02"), + }, + .driver_data = (void *)(BYTCR_INPUT_DEFAULTS | + BYT_RT5640_MONO_SPEAKER | + BYT_RT5640_SSP0_AIF1 | + BYT_RT5640_MCLK_EN), + }, { /* Chuwi Vi10 (CWI505) */ .matches = { -- 2.43.0

1 year

1
4
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror March 2024