June 2024 - Linux-stable-mirror

FAILED: patch "[PATCH] mm/cma: drop incorrect alignment check in" failed to apply to 5.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x b174f139bdc8aaaf72f5b67ad1bd512c4868a87e # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024061301-runt-mannish-7604@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: b174f139bdc8 ("mm/cma: drop incorrect alignment check in cma_init_reserved_mem") e16faf26780f ("cma: factor out minimum alignment requirement") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From b174f139bdc8aaaf72f5b67ad1bd512c4868a87e Mon Sep 17 00:00:00 2001 From: Frank van der Linden <fvdl(a)google.com> Date: Thu, 4 Apr 2024 16:25:14 +0000 Subject: [PATCH] mm/cma: drop incorrect alignment check in cma_init_reserved_mem cma_init_reserved_mem uses IS_ALIGNED to check if the size represented by one bit in the cma allocation bitmask is aligned with CMA_MIN_ALIGNMENT_BYTES (pageblock size). However, this is too strict, as this will fail if order_per_bit > pageblock_order, which is a valid configuration. We could check IS_ALIGNED both ways, but since both numbers are powers of two, no check is needed at all. Link: https://lkml.kernel.org/r/20240404162515.527802-1-fvdl@google.com Fixes: de9e14eebf33 ("drivers: dma-contiguous: add initialization from device tree") Signed-off-by: Frank van der Linden <fvdl(a)google.com> Acked-by: David Hildenbrand <david(a)redhat.com> Cc: Marek Szyprowski <m.szyprowski(a)samsung.com> Cc: Muchun Song <muchun.song(a)linux.dev> Cc: Roman Gushchin <roman.gushchin(a)linux.dev> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> diff --git a/mm/cma.c b/mm/cma.c index 01f5a8f71ddf..3e9724716bad 100644 --- a/mm/cma.c +++ b/mm/cma.c @@ -182,10 +182,6 @@ int __init cma_init_reserved_mem(phys_addr_t base, phys_addr_t size, if (!size || !memblock_is_region_reserved(base, size)) return -EINVAL; - /* alignment should be aligned with order_per_bit */ - if (!IS_ALIGNED(CMA_MIN_ALIGNMENT_PAGES, 1 << order_per_bit)) - return -EINVAL; - /* ensure minimal alignment required by mm core */ if (!IS_ALIGNED(base | size, CMA_MIN_ALIGNMENT_BYTES)) return -EINVAL;

8 months, 2 weeks

1
0
0 0

[PATCH 6.1 1/1] net: fix __dst_negative_advice() race

by Lee Jones

From: Eric Dumazet <edumazet(a)google.com> __dst_negative_advice() does not enforce proper RCU rules when sk->dst_cache must be cleared, leading to possible UAF. RCU rules are that we must first clear sk->sk_dst_cache, then call dst_release(old_dst). Note that sk_dst_reset(sk) is implementing this protocol correctly, while __dst_negative_advice() uses the wrong order. Given that ip6_negative_advice() has special logic against RTF_CACHE, this means each of the three ->negative_advice() existing methods must perform the sk_dst_reset() themselves. Note the check against NULL dst is centralized in __dst_negative_advice(), there is no need to duplicate it in various callbacks. Many thanks to Clement Lecigne for tracking this issue. This old bug became visible after the blamed commit, using UDP sockets. Fixes: a87cb3e48ee8 ("net: Facility to report route quality of connected sockets") Reported-by: Clement Lecigne <clecigne(a)google.com> Diagnosed-by: Clement Lecigne <clecigne(a)google.com> Signed-off-by: Eric Dumazet <edumazet(a)google.com> Cc: Tom Herbert <tom(a)herbertland.com> Reviewed-by: David Ahern <dsahern(a)kernel.org> Link: https://lore.kernel.org/r/20240528114353.1794151-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> (cherry picked from commit 92f1655aa2b2294d0b49925f3b875a634bd3b59e) [Lee: Stable backport] Signed-off-by: Lee Jones <lee(a)kernel.org> --- include/net/dst_ops.h | 2 +- include/net/sock.h | 13 +++---------- net/ipv4/route.c | 22 ++++++++-------------- net/ipv6/route.c | 29 +++++++++++++++-------------- net/xfrm/xfrm_policy.c | 11 +++-------- 5 files changed, 30 insertions(+), 47 deletions(-) diff --git a/include/net/dst_ops.h b/include/net/dst_ops.h index 632086b2f644..3ae2fda29507 100644 --- a/include/net/dst_ops.h +++ b/include/net/dst_ops.h @@ -24,7 +24,7 @@ struct dst_ops { void (*destroy)(struct dst_entry *); void (*ifdown)(struct dst_entry *, struct net_device *dev, int how); - struct dst_entry * (*negative_advice)(struct dst_entry *); + void (*negative_advice)(struct sock *sk, struct dst_entry *); void (*link_failure)(struct sk_buff *); void (*update_pmtu)(struct dst_entry *dst, struct sock *sk, struct sk_buff *skb, u32 mtu, diff --git a/include/net/sock.h b/include/net/sock.h index 77298c74822a..9dab48207874 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -2212,17 +2212,10 @@ sk_dst_get(struct sock *sk) static inline void __dst_negative_advice(struct sock *sk) { - struct dst_entry *ndst, *dst = __sk_dst_get(sk); + struct dst_entry *dst = __sk_dst_get(sk); - if (dst && dst->ops->negative_advice) { - ndst = dst->ops->negative_advice(dst); - - if (ndst != dst) { - rcu_assign_pointer(sk->sk_dst_cache, ndst); - sk_tx_queue_clear(sk); - WRITE_ONCE(sk->sk_dst_pending_confirm, 0); - } - } + if (dst && dst->ops->negative_advice) + dst->ops->negative_advice(sk, dst); } static inline void dst_negative_advice(struct sock *sk) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 6c0f1e347b85..fcbacd39febe 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -132,7 +132,8 @@ struct dst_entry *ipv4_dst_check(struct dst_entry *dst, u32 cookie); static unsigned int ipv4_default_advmss(const struct dst_entry *dst); INDIRECT_CALLABLE_SCOPE unsigned int ipv4_mtu(const struct dst_entry *dst); -static struct dst_entry *ipv4_negative_advice(struct dst_entry *dst); +static void ipv4_negative_advice(struct sock *sk, + struct dst_entry *dst); static void ipv4_link_failure(struct sk_buff *skb); static void ip_rt_update_pmtu(struct dst_entry *dst, struct sock *sk, struct sk_buff *skb, u32 mtu, @@ -837,22 +838,15 @@ static void ip_do_redirect(struct dst_entry *dst, struct sock *sk, struct sk_buf __ip_do_redirect(rt, skb, &fl4, true); } -static struct dst_entry *ipv4_negative_advice(struct dst_entry *dst) +static void ipv4_negative_advice(struct sock *sk, + struct dst_entry *dst) { struct rtable *rt = (struct rtable *)dst; - struct dst_entry *ret = dst; - if (rt) { - if (dst->obsolete > 0) { - ip_rt_put(rt); - ret = NULL; - } else if ((rt->rt_flags & RTCF_REDIRECTED) || - rt->dst.expires) { - ip_rt_put(rt); - ret = NULL; - } - } - return ret; + if ((dst->obsolete > 0) || + (rt->rt_flags & RTCF_REDIRECTED) || + rt->dst.expires) + sk_dst_reset(sk); } /* diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 887599d351b8..2611f7897413 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -87,7 +87,8 @@ struct dst_entry *ip6_dst_check(struct dst_entry *dst, u32 cookie); static unsigned int ip6_default_advmss(const struct dst_entry *dst); INDIRECT_CALLABLE_SCOPE unsigned int ip6_mtu(const struct dst_entry *dst); -static struct dst_entry *ip6_negative_advice(struct dst_entry *); +static void ip6_negative_advice(struct sock *sk, + struct dst_entry *dst); static void ip6_dst_destroy(struct dst_entry *); static void ip6_dst_ifdown(struct dst_entry *, struct net_device *dev, int how); @@ -2762,24 +2763,24 @@ INDIRECT_CALLABLE_SCOPE struct dst_entry *ip6_dst_check(struct dst_entry *dst, } EXPORT_INDIRECT_CALLABLE(ip6_dst_check); -static struct dst_entry *ip6_negative_advice(struct dst_entry *dst) +static void ip6_negative_advice(struct sock *sk, + struct dst_entry *dst) { struct rt6_info *rt = (struct rt6_info *) dst; - if (rt) { - if (rt->rt6i_flags & RTF_CACHE) { - rcu_read_lock(); - if (rt6_check_expired(rt)) { - rt6_remove_exception_rt(rt); - dst = NULL; - } - rcu_read_unlock(); - } else { - dst_release(dst); - dst = NULL; + if (rt->rt6i_flags & RTF_CACHE) { + rcu_read_lock(); + if (rt6_check_expired(rt)) { + /* counteract the dst_release() in sk_dst_reset() */ + dst_hold(dst); + sk_dst_reset(sk); + + rt6_remove_exception_rt(rt); } + rcu_read_unlock(); + return; } - return dst; + sk_dst_reset(sk); } static void ip6_link_failure(struct sk_buff *skb) diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index e47c670c7e2c..5fddde2d5bc4 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -3772,15 +3772,10 @@ static void xfrm_link_failure(struct sk_buff *skb) /* Impossible. Such dst must be popped before reaches point of failure. */ } -static struct dst_entry *xfrm_negative_advice(struct dst_entry *dst) +static void xfrm_negative_advice(struct sock *sk, struct dst_entry *dst) { - if (dst) { - if (dst->obsolete) { - dst_release(dst); - dst = NULL; - } - } - return dst; + if (dst->obsolete) + sk_dst_reset(sk); } static void xfrm_init_pmtu(struct xfrm_dst **bundle, int nr) -- 2.45.2.505.gda0bf45e8d-goog

8 months, 2 weeks

1
5
0 0

FAILED: patch "[PATCH] rtla/timerlat: Fix histogram report when a cpu count is 0" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x 01b05fc0e5f3aec443a9a8ffa0022cbca2fd3608 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024061354-playtime-clumsy-d741@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: 01b05fc0e5f3 ("rtla/timerlat: Fix histogram report when a cpu count is 0") ed774f7481fa ("rtla/timerlat_hist: Add timerlat user-space support") 2091336b9a8b ("rtla/timerlat_hist: Add auto-analysis support") 272ced2556e6 ("rtla: Add --house-keeping option") a957cbc02531 ("rtla: Add -C cgroup support") 9fa48a2477de ("rtla/timerlat: Add auto-analysis only option") 1f428356c38d ("rtla: Add hwnoise tool") ce6cc6f70cad ("Documentation/rtla: Add timerlat-top auto-analysis options") 5def33df84d2 ("rtla/timerlat: Add auto-analysis support to timerlat top") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 01b05fc0e5f3aec443a9a8ffa0022cbca2fd3608 Mon Sep 17 00:00:00 2001 From: John Kacur <jkacur(a)redhat.com> Date: Fri, 10 May 2024 15:03:18 -0400 Subject: [PATCH] rtla/timerlat: Fix histogram report when a cpu count is 0 On short runs it is possible to get no samples on a cpu, like this: # rtla timerlat hist -u -T50 Index IRQ-001 Thr-001 Usr-001 IRQ-002 Thr-002 Usr-002 2 1 0 0 0 0 0 33 0 1 0 0 0 0 36 0 0 1 0 0 0 49 0 0 0 1 0 0 52 0 0 0 0 1 0 over: 0 0 0 0 0 0 count: 1 1 1 1 1 0 min: 2 33 36 49 52 18446744073709551615 avg: 2 33 36 49 52 - max: 2 33 36 49 52 0 rtla timerlat hit stop tracing IRQ handler delay: (exit from idle) 48.21 us (91.09 %) IRQ latency: 49.11 us Timerlat IRQ duration: 2.17 us (4.09 %) Blocking thread: 1.01 us (1.90 %) swapper/2:0 1.01 us ------------------------------------------------------------------------ Thread latency: 52.93 us (100%) Max timerlat IRQ latency from idle: 49.11 us in cpu 2 Note, the value 18446744073709551615 is the same as ~0. Fix this by reporting no results for the min, avg and max if the count is 0. Link: https://lkml.kernel.org/r/20240510190318.44295-1-jkacur@redhat.com Cc: stable(a)vger.kernel.org Fixes: 1eeb6328e8b3 ("rtla/timerlat: Add timerlat hist mode") Suggested-by: Daniel Bristot de Oliveria <bristot(a)kernel.org> Signed-off-by: John Kacur <jkacur(a)redhat.com> Signed-off-by: Daniel Bristot de Oliveira <bristot(a)kernel.org> diff --git a/tools/tracing/rtla/src/timerlat_hist.c b/tools/tracing/rtla/src/timerlat_hist.c index d4bab86ca1b9..fbe2c6549bf9 100644 --- a/tools/tracing/rtla/src/timerlat_hist.c +++ b/tools/tracing/rtla/src/timerlat_hist.c @@ -327,17 +327,29 @@ timerlat_print_summary(struct timerlat_hist_params *params, if (!data->hist[cpu].irq_count && !data->hist[cpu].thread_count) continue; - if (!params->no_irq) - trace_seq_printf(trace->seq, "%9llu ", - data->hist[cpu].min_irq); + if (!params->no_irq) { + if (data->hist[cpu].irq_count) + trace_seq_printf(trace->seq, "%9llu ", + data->hist[cpu].min_irq); + else + trace_seq_printf(trace->seq, " - "); + } - if (!params->no_thread) - trace_seq_printf(trace->seq, "%9llu ", - data->hist[cpu].min_thread); + if (!params->no_thread) { + if (data->hist[cpu].thread_count) + trace_seq_printf(trace->seq, "%9llu ", + data->hist[cpu].min_thread); + else + trace_seq_printf(trace->seq, " - "); + } - if (params->user_hist) - trace_seq_printf(trace->seq, "%9llu ", - data->hist[cpu].min_user); + if (params->user_hist) { + if (data->hist[cpu].user_count) + trace_seq_printf(trace->seq, "%9llu ", + data->hist[cpu].min_user); + else + trace_seq_printf(trace->seq, " - "); + } } trace_seq_printf(trace->seq, "\n"); @@ -387,17 +399,29 @@ timerlat_print_summary(struct timerlat_hist_params *params, if (!data->hist[cpu].irq_count && !data->hist[cpu].thread_count) continue; - if (!params->no_irq) - trace_seq_printf(trace->seq, "%9llu ", - data->hist[cpu].max_irq); + if (!params->no_irq) { + if (data->hist[cpu].irq_count) + trace_seq_printf(trace->seq, "%9llu ", + data->hist[cpu].max_irq); + else + trace_seq_printf(trace->seq, " - "); + } - if (!params->no_thread) - trace_seq_printf(trace->seq, "%9llu ", - data->hist[cpu].max_thread); + if (!params->no_thread) { + if (data->hist[cpu].thread_count) + trace_seq_printf(trace->seq, "%9llu ", + data->hist[cpu].max_thread); + else + trace_seq_printf(trace->seq, " - "); + } - if (params->user_hist) - trace_seq_printf(trace->seq, "%9llu ", - data->hist[cpu].max_user); + if (params->user_hist) { + if (data->hist[cpu].user_count) + trace_seq_printf(trace->seq, "%9llu ", + data->hist[cpu].max_user); + else + trace_seq_printf(trace->seq, " - "); + } } trace_seq_printf(trace->seq, "\n"); trace_seq_do_printf(trace->seq);

8 months, 2 weeks

1
0
0 0

FAILED: patch "[PATCH] i2c: acpi: Unbind mux adapters before delete" failed to apply to 4.19-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.19-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-4.19.y git checkout FETCH_HEAD git cherry-pick -x 3f858bbf04dbac934ac279aaee05d49eb9910051 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024061326-catalyst-ridden-9b12@gregkh' --subject-prefix 'PATCH 4.19.y' HEAD^.. Possible dependencies: 3f858bbf04db ("i2c: acpi: Unbind mux adapters before delete") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 3f858bbf04dbac934ac279aaee05d49eb9910051 Mon Sep 17 00:00:00 2001 From: Hamish Martin <hamish.martin(a)alliedtelesis.co.nz> Date: Wed, 13 Mar 2024 11:16:32 +1300 Subject: [PATCH] i2c: acpi: Unbind mux adapters before delete There is an issue with ACPI overlay table removal specifically related to I2C multiplexers. Consider an ACPI SSDT Overlay that defines a PCA9548 I2C mux on an existing I2C bus. When this table is loaded we see the creation of a device for the overall PCA9548 chip and 8 further devices - one i2c_adapter each for the mux channels. These are all bound to their ACPI equivalents via an eventual invocation of acpi_bind_one(). When we unload the SSDT overlay we run into the problem. The ACPI devices are deleted as normal via acpi_device_del_work_fn() and the acpi_device_del_list. However, the following warning and stack trace is output as the deletion does not go smoothly: ------------[ cut here ]------------ kernfs: can not remove 'physical_node', no directory WARNING: CPU: 1 PID: 11 at fs/kernfs/dir.c:1674 kernfs_remove_by_name_ns+0xb9/0xc0 Modules linked in: CPU: 1 PID: 11 Comm: kworker/u128:0 Not tainted 6.8.0-rc6+ #1 Hardware name: congatec AG conga-B7E3/conga-B7E3, BIOS 5.13 05/16/2023 Workqueue: kacpi_hotplug acpi_device_del_work_fn RIP: 0010:kernfs_remove_by_name_ns+0xb9/0xc0 Code: e4 00 48 89 ef e8 07 71 db ff 5b b8 fe ff ff ff 5d 41 5c 41 5d e9 a7 55 e4 00 0f 0b eb a6 48 c7 c7 f0 38 0d 9d e8 97 0a d5 ff <0f> 0b eb dc 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 RSP: 0018:ffff9f864008fb28 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff8ef90a8d4940 RCX: 0000000000000000 RDX: ffff8f000e267d10 RSI: ffff8f000e25c780 RDI: ffff8f000e25c780 RBP: ffff8ef9186f9870 R08: 0000000000013ffb R09: 00000000ffffbfff R10: 00000000ffffbfff R11: ffff8f000e0a0000 R12: ffff9f864008fb50 R13: ffff8ef90c93dd60 R14: ffff8ef9010d0958 R15: ffff8ef9186f98c8 FS: 0000000000000000(0000) GS:ffff8f000e240000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f48f5253a08 CR3: 00000003cb82e000 CR4: 00000000003506f0 Call Trace: <TASK> ? kernfs_remove_by_name_ns+0xb9/0xc0 ? __warn+0x7c/0x130 ? kernfs_remove_by_name_ns+0xb9/0xc0 ? report_bug+0x171/0x1a0 ? handle_bug+0x3c/0x70 ? exc_invalid_op+0x17/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? kernfs_remove_by_name_ns+0xb9/0xc0 ? kernfs_remove_by_name_ns+0xb9/0xc0 acpi_unbind_one+0x108/0x180 device_del+0x18b/0x490 ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f device_unregister+0xd/0x30 i2c_del_adapter.part.0+0x1bf/0x250 i2c_mux_del_adapters+0xa1/0xe0 i2c_device_remove+0x1e/0x80 device_release_driver_internal+0x19a/0x200 bus_remove_device+0xbf/0x100 device_del+0x157/0x490 ? __pfx_device_match_fwnode+0x10/0x10 ? srso_return_thunk+0x5/0x5f device_unregister+0xd/0x30 i2c_acpi_notify+0x10f/0x140 notifier_call_chain+0x58/0xd0 blocking_notifier_call_chain+0x3a/0x60 acpi_device_del_work_fn+0x85/0x1d0 process_one_work+0x134/0x2f0 worker_thread+0x2f0/0x410 ? __pfx_worker_thread+0x10/0x10 kthread+0xe3/0x110 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2f/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> ---[ end trace 0000000000000000 ]--- ... repeated 7 more times, 1 for each channel of the mux ... The issue is that the binding of the ACPI devices to their peer I2C adapters is not correctly cleaned up. Digging deeper into the issue we see that the deletion order is such that the ACPI devices matching the mux channel i2c adapters are deleted first during the SSDT overlay removal. For each of the channels we see a call to i2c_acpi_notify() with ACPI_RECONFIG_DEVICE_REMOVE but, because these devices are not actually i2c_clients, nothing is done for them. Later on, after each of the mux channels has been dealt with, we come to delete the i2c_client representing the PCA9548 device. This is the call stack we see above, whereby the kernel cleans up the i2c_client including destruction of the mux and its channel adapters. At this point we do attempt to unbind from the ACPI peers but those peers no longer exist and so we hit the kernfs errors. The fix is to augment i2c_acpi_notify() to handle i2c_adapters. But, given that the life cycle of the adapters is linked to the i2c_client, instead of deleting the i2c_adapters during the i2c_acpi_notify(), we just trigger unbinding of the ACPI device from the adapter device, and allow the clean up of the adapter to continue in the way it always has. Signed-off-by: Hamish Martin <hamish.martin(a)alliedtelesis.co.nz> Reviewed-by: Mika Westerberg <mika.westerberg(a)linux.intel.com> Reviewed-by: Andi Shyti <andi.shyti(a)kernel.org> Fixes: 525e6fabeae2 ("i2c / ACPI: add support for ACPI reconfigure notifications") Cc: <stable(a)vger.kernel.org> # v4.8+ Signed-off-by: Wolfram Sang <wsa+renesas(a)sang-engineering.com> diff --git a/drivers/i2c/i2c-core-acpi.c b/drivers/i2c/i2c-core-acpi.c index d6037a328669..14ae0cfc325e 100644 --- a/drivers/i2c/i2c-core-acpi.c +++ b/drivers/i2c/i2c-core-acpi.c @@ -445,6 +445,11 @@ static struct i2c_client *i2c_acpi_find_client_by_adev(struct acpi_device *adev) return i2c_find_device_by_fwnode(acpi_fwnode_handle(adev)); } +static struct i2c_adapter *i2c_acpi_find_adapter_by_adev(struct acpi_device *adev) +{ + return i2c_find_adapter_by_fwnode(acpi_fwnode_handle(adev)); +} + static int i2c_acpi_notify(struct notifier_block *nb, unsigned long value, void *arg) { @@ -471,11 +476,17 @@ static int i2c_acpi_notify(struct notifier_block *nb, unsigned long value, break; client = i2c_acpi_find_client_by_adev(adev); - if (!client) - break; + if (client) { + i2c_unregister_device(client); + put_device(&client->dev); + } + + adapter = i2c_acpi_find_adapter_by_adev(adev); + if (adapter) { + acpi_unbind_one(&adapter->dev); + put_device(&adapter->dev); + } - i2c_unregister_device(client); - put_device(&client->dev); break; }

8 months, 2 weeks

1
0
0 0

FAILED: patch "[PATCH] i2c: acpi: Unbind mux adapters before delete" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y git checkout FETCH_HEAD git cherry-pick -x 3f858bbf04dbac934ac279aaee05d49eb9910051 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024061323-augmented-much-5265@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^.. Possible dependencies: 3f858bbf04db ("i2c: acpi: Unbind mux adapters before delete") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 3f858bbf04dbac934ac279aaee05d49eb9910051 Mon Sep 17 00:00:00 2001 From: Hamish Martin <hamish.martin(a)alliedtelesis.co.nz> Date: Wed, 13 Mar 2024 11:16:32 +1300 Subject: [PATCH] i2c: acpi: Unbind mux adapters before delete There is an issue with ACPI overlay table removal specifically related to I2C multiplexers. Consider an ACPI SSDT Overlay that defines a PCA9548 I2C mux on an existing I2C bus. When this table is loaded we see the creation of a device for the overall PCA9548 chip and 8 further devices - one i2c_adapter each for the mux channels. These are all bound to their ACPI equivalents via an eventual invocation of acpi_bind_one(). When we unload the SSDT overlay we run into the problem. The ACPI devices are deleted as normal via acpi_device_del_work_fn() and the acpi_device_del_list. However, the following warning and stack trace is output as the deletion does not go smoothly: ------------[ cut here ]------------ kernfs: can not remove 'physical_node', no directory WARNING: CPU: 1 PID: 11 at fs/kernfs/dir.c:1674 kernfs_remove_by_name_ns+0xb9/0xc0 Modules linked in: CPU: 1 PID: 11 Comm: kworker/u128:0 Not tainted 6.8.0-rc6+ #1 Hardware name: congatec AG conga-B7E3/conga-B7E3, BIOS 5.13 05/16/2023 Workqueue: kacpi_hotplug acpi_device_del_work_fn RIP: 0010:kernfs_remove_by_name_ns+0xb9/0xc0 Code: e4 00 48 89 ef e8 07 71 db ff 5b b8 fe ff ff ff 5d 41 5c 41 5d e9 a7 55 e4 00 0f 0b eb a6 48 c7 c7 f0 38 0d 9d e8 97 0a d5 ff <0f> 0b eb dc 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 RSP: 0018:ffff9f864008fb28 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff8ef90a8d4940 RCX: 0000000000000000 RDX: ffff8f000e267d10 RSI: ffff8f000e25c780 RDI: ffff8f000e25c780 RBP: ffff8ef9186f9870 R08: 0000000000013ffb R09: 00000000ffffbfff R10: 00000000ffffbfff R11: ffff8f000e0a0000 R12: ffff9f864008fb50 R13: ffff8ef90c93dd60 R14: ffff8ef9010d0958 R15: ffff8ef9186f98c8 FS: 0000000000000000(0000) GS:ffff8f000e240000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f48f5253a08 CR3: 00000003cb82e000 CR4: 00000000003506f0 Call Trace: <TASK> ? kernfs_remove_by_name_ns+0xb9/0xc0 ? __warn+0x7c/0x130 ? kernfs_remove_by_name_ns+0xb9/0xc0 ? report_bug+0x171/0x1a0 ? handle_bug+0x3c/0x70 ? exc_invalid_op+0x17/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? kernfs_remove_by_name_ns+0xb9/0xc0 ? kernfs_remove_by_name_ns+0xb9/0xc0 acpi_unbind_one+0x108/0x180 device_del+0x18b/0x490 ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f device_unregister+0xd/0x30 i2c_del_adapter.part.0+0x1bf/0x250 i2c_mux_del_adapters+0xa1/0xe0 i2c_device_remove+0x1e/0x80 device_release_driver_internal+0x19a/0x200 bus_remove_device+0xbf/0x100 device_del+0x157/0x490 ? __pfx_device_match_fwnode+0x10/0x10 ? srso_return_thunk+0x5/0x5f device_unregister+0xd/0x30 i2c_acpi_notify+0x10f/0x140 notifier_call_chain+0x58/0xd0 blocking_notifier_call_chain+0x3a/0x60 acpi_device_del_work_fn+0x85/0x1d0 process_one_work+0x134/0x2f0 worker_thread+0x2f0/0x410 ? __pfx_worker_thread+0x10/0x10 kthread+0xe3/0x110 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2f/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> ---[ end trace 0000000000000000 ]--- ... repeated 7 more times, 1 for each channel of the mux ... The issue is that the binding of the ACPI devices to their peer I2C adapters is not correctly cleaned up. Digging deeper into the issue we see that the deletion order is such that the ACPI devices matching the mux channel i2c adapters are deleted first during the SSDT overlay removal. For each of the channels we see a call to i2c_acpi_notify() with ACPI_RECONFIG_DEVICE_REMOVE but, because these devices are not actually i2c_clients, nothing is done for them. Later on, after each of the mux channels has been dealt with, we come to delete the i2c_client representing the PCA9548 device. This is the call stack we see above, whereby the kernel cleans up the i2c_client including destruction of the mux and its channel adapters. At this point we do attempt to unbind from the ACPI peers but those peers no longer exist and so we hit the kernfs errors. The fix is to augment i2c_acpi_notify() to handle i2c_adapters. But, given that the life cycle of the adapters is linked to the i2c_client, instead of deleting the i2c_adapters during the i2c_acpi_notify(), we just trigger unbinding of the ACPI device from the adapter device, and allow the clean up of the adapter to continue in the way it always has. Signed-off-by: Hamish Martin <hamish.martin(a)alliedtelesis.co.nz> Reviewed-by: Mika Westerberg <mika.westerberg(a)linux.intel.com> Reviewed-by: Andi Shyti <andi.shyti(a)kernel.org> Fixes: 525e6fabeae2 ("i2c / ACPI: add support for ACPI reconfigure notifications") Cc: <stable(a)vger.kernel.org> # v4.8+ Signed-off-by: Wolfram Sang <wsa+renesas(a)sang-engineering.com> diff --git a/drivers/i2c/i2c-core-acpi.c b/drivers/i2c/i2c-core-acpi.c index d6037a328669..14ae0cfc325e 100644 --- a/drivers/i2c/i2c-core-acpi.c +++ b/drivers/i2c/i2c-core-acpi.c @@ -445,6 +445,11 @@ static struct i2c_client *i2c_acpi_find_client_by_adev(struct acpi_device *adev) return i2c_find_device_by_fwnode(acpi_fwnode_handle(adev)); } +static struct i2c_adapter *i2c_acpi_find_adapter_by_adev(struct acpi_device *adev) +{ + return i2c_find_adapter_by_fwnode(acpi_fwnode_handle(adev)); +} + static int i2c_acpi_notify(struct notifier_block *nb, unsigned long value, void *arg) { @@ -471,11 +476,17 @@ static int i2c_acpi_notify(struct notifier_block *nb, unsigned long value, break; client = i2c_acpi_find_client_by_adev(adev); - if (!client) - break; + if (client) { + i2c_unregister_device(client); + put_device(&client->dev); + } + + adapter = i2c_acpi_find_adapter_by_adev(adev); + if (adapter) { + acpi_unbind_one(&adapter->dev); + put_device(&adapter->dev); + } - i2c_unregister_device(client); - put_device(&client->dev); break; }

8 months, 2 weeks

1
0
0 0

FAILED: patch "[PATCH] i2c: acpi: Unbind mux adapters before delete" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x 3f858bbf04dbac934ac279aaee05d49eb9910051 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024061321-unfeeling-stinging-0b73@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: 3f858bbf04db ("i2c: acpi: Unbind mux adapters before delete") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 3f858bbf04dbac934ac279aaee05d49eb9910051 Mon Sep 17 00:00:00 2001 From: Hamish Martin <hamish.martin(a)alliedtelesis.co.nz> Date: Wed, 13 Mar 2024 11:16:32 +1300 Subject: [PATCH] i2c: acpi: Unbind mux adapters before delete There is an issue with ACPI overlay table removal specifically related to I2C multiplexers. Consider an ACPI SSDT Overlay that defines a PCA9548 I2C mux on an existing I2C bus. When this table is loaded we see the creation of a device for the overall PCA9548 chip and 8 further devices - one i2c_adapter each for the mux channels. These are all bound to their ACPI equivalents via an eventual invocation of acpi_bind_one(). When we unload the SSDT overlay we run into the problem. The ACPI devices are deleted as normal via acpi_device_del_work_fn() and the acpi_device_del_list. However, the following warning and stack trace is output as the deletion does not go smoothly: ------------[ cut here ]------------ kernfs: can not remove 'physical_node', no directory WARNING: CPU: 1 PID: 11 at fs/kernfs/dir.c:1674 kernfs_remove_by_name_ns+0xb9/0xc0 Modules linked in: CPU: 1 PID: 11 Comm: kworker/u128:0 Not tainted 6.8.0-rc6+ #1 Hardware name: congatec AG conga-B7E3/conga-B7E3, BIOS 5.13 05/16/2023 Workqueue: kacpi_hotplug acpi_device_del_work_fn RIP: 0010:kernfs_remove_by_name_ns+0xb9/0xc0 Code: e4 00 48 89 ef e8 07 71 db ff 5b b8 fe ff ff ff 5d 41 5c 41 5d e9 a7 55 e4 00 0f 0b eb a6 48 c7 c7 f0 38 0d 9d e8 97 0a d5 ff <0f> 0b eb dc 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 RSP: 0018:ffff9f864008fb28 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff8ef90a8d4940 RCX: 0000000000000000 RDX: ffff8f000e267d10 RSI: ffff8f000e25c780 RDI: ffff8f000e25c780 RBP: ffff8ef9186f9870 R08: 0000000000013ffb R09: 00000000ffffbfff R10: 00000000ffffbfff R11: ffff8f000e0a0000 R12: ffff9f864008fb50 R13: ffff8ef90c93dd60 R14: ffff8ef9010d0958 R15: ffff8ef9186f98c8 FS: 0000000000000000(0000) GS:ffff8f000e240000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f48f5253a08 CR3: 00000003cb82e000 CR4: 00000000003506f0 Call Trace: <TASK> ? kernfs_remove_by_name_ns+0xb9/0xc0 ? __warn+0x7c/0x130 ? kernfs_remove_by_name_ns+0xb9/0xc0 ? report_bug+0x171/0x1a0 ? handle_bug+0x3c/0x70 ? exc_invalid_op+0x17/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? kernfs_remove_by_name_ns+0xb9/0xc0 ? kernfs_remove_by_name_ns+0xb9/0xc0 acpi_unbind_one+0x108/0x180 device_del+0x18b/0x490 ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f device_unregister+0xd/0x30 i2c_del_adapter.part.0+0x1bf/0x250 i2c_mux_del_adapters+0xa1/0xe0 i2c_device_remove+0x1e/0x80 device_release_driver_internal+0x19a/0x200 bus_remove_device+0xbf/0x100 device_del+0x157/0x490 ? __pfx_device_match_fwnode+0x10/0x10 ? srso_return_thunk+0x5/0x5f device_unregister+0xd/0x30 i2c_acpi_notify+0x10f/0x140 notifier_call_chain+0x58/0xd0 blocking_notifier_call_chain+0x3a/0x60 acpi_device_del_work_fn+0x85/0x1d0 process_one_work+0x134/0x2f0 worker_thread+0x2f0/0x410 ? __pfx_worker_thread+0x10/0x10 kthread+0xe3/0x110 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2f/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> ---[ end trace 0000000000000000 ]--- ... repeated 7 more times, 1 for each channel of the mux ... The issue is that the binding of the ACPI devices to their peer I2C adapters is not correctly cleaned up. Digging deeper into the issue we see that the deletion order is such that the ACPI devices matching the mux channel i2c adapters are deleted first during the SSDT overlay removal. For each of the channels we see a call to i2c_acpi_notify() with ACPI_RECONFIG_DEVICE_REMOVE but, because these devices are not actually i2c_clients, nothing is done for them. Later on, after each of the mux channels has been dealt with, we come to delete the i2c_client representing the PCA9548 device. This is the call stack we see above, whereby the kernel cleans up the i2c_client including destruction of the mux and its channel adapters. At this point we do attempt to unbind from the ACPI peers but those peers no longer exist and so we hit the kernfs errors. The fix is to augment i2c_acpi_notify() to handle i2c_adapters. But, given that the life cycle of the adapters is linked to the i2c_client, instead of deleting the i2c_adapters during the i2c_acpi_notify(), we just trigger unbinding of the ACPI device from the adapter device, and allow the clean up of the adapter to continue in the way it always has. Signed-off-by: Hamish Martin <hamish.martin(a)alliedtelesis.co.nz> Reviewed-by: Mika Westerberg <mika.westerberg(a)linux.intel.com> Reviewed-by: Andi Shyti <andi.shyti(a)kernel.org> Fixes: 525e6fabeae2 ("i2c / ACPI: add support for ACPI reconfigure notifications") Cc: <stable(a)vger.kernel.org> # v4.8+ Signed-off-by: Wolfram Sang <wsa+renesas(a)sang-engineering.com> diff --git a/drivers/i2c/i2c-core-acpi.c b/drivers/i2c/i2c-core-acpi.c index d6037a328669..14ae0cfc325e 100644 --- a/drivers/i2c/i2c-core-acpi.c +++ b/drivers/i2c/i2c-core-acpi.c @@ -445,6 +445,11 @@ static struct i2c_client *i2c_acpi_find_client_by_adev(struct acpi_device *adev) return i2c_find_device_by_fwnode(acpi_fwnode_handle(adev)); } +static struct i2c_adapter *i2c_acpi_find_adapter_by_adev(struct acpi_device *adev) +{ + return i2c_find_adapter_by_fwnode(acpi_fwnode_handle(adev)); +} + static int i2c_acpi_notify(struct notifier_block *nb, unsigned long value, void *arg) { @@ -471,11 +476,17 @@ static int i2c_acpi_notify(struct notifier_block *nb, unsigned long value, break; client = i2c_acpi_find_client_by_adev(adev); - if (!client) - break; + if (client) { + i2c_unregister_device(client); + put_device(&client->dev); + } + + adapter = i2c_acpi_find_adapter_by_adev(adev); + if (adapter) { + acpi_unbind_one(&adapter->dev); + put_device(&adapter->dev); + } - i2c_unregister_device(client); - put_device(&client->dev); break; }

8 months, 2 weeks

1
0
0 0

FAILED: patch "[PATCH] i2c: acpi: Unbind mux adapters before delete" failed to apply to 5.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x 3f858bbf04dbac934ac279aaee05d49eb9910051 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024061319-epic-chunk-b98b@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: 3f858bbf04db ("i2c: acpi: Unbind mux adapters before delete") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 3f858bbf04dbac934ac279aaee05d49eb9910051 Mon Sep 17 00:00:00 2001 From: Hamish Martin <hamish.martin(a)alliedtelesis.co.nz> Date: Wed, 13 Mar 2024 11:16:32 +1300 Subject: [PATCH] i2c: acpi: Unbind mux adapters before delete There is an issue with ACPI overlay table removal specifically related to I2C multiplexers. Consider an ACPI SSDT Overlay that defines a PCA9548 I2C mux on an existing I2C bus. When this table is loaded we see the creation of a device for the overall PCA9548 chip and 8 further devices - one i2c_adapter each for the mux channels. These are all bound to their ACPI equivalents via an eventual invocation of acpi_bind_one(). When we unload the SSDT overlay we run into the problem. The ACPI devices are deleted as normal via acpi_device_del_work_fn() and the acpi_device_del_list. However, the following warning and stack trace is output as the deletion does not go smoothly: ------------[ cut here ]------------ kernfs: can not remove 'physical_node', no directory WARNING: CPU: 1 PID: 11 at fs/kernfs/dir.c:1674 kernfs_remove_by_name_ns+0xb9/0xc0 Modules linked in: CPU: 1 PID: 11 Comm: kworker/u128:0 Not tainted 6.8.0-rc6+ #1 Hardware name: congatec AG conga-B7E3/conga-B7E3, BIOS 5.13 05/16/2023 Workqueue: kacpi_hotplug acpi_device_del_work_fn RIP: 0010:kernfs_remove_by_name_ns+0xb9/0xc0 Code: e4 00 48 89 ef e8 07 71 db ff 5b b8 fe ff ff ff 5d 41 5c 41 5d e9 a7 55 e4 00 0f 0b eb a6 48 c7 c7 f0 38 0d 9d e8 97 0a d5 ff <0f> 0b eb dc 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 RSP: 0018:ffff9f864008fb28 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff8ef90a8d4940 RCX: 0000000000000000 RDX: ffff8f000e267d10 RSI: ffff8f000e25c780 RDI: ffff8f000e25c780 RBP: ffff8ef9186f9870 R08: 0000000000013ffb R09: 00000000ffffbfff R10: 00000000ffffbfff R11: ffff8f000e0a0000 R12: ffff9f864008fb50 R13: ffff8ef90c93dd60 R14: ffff8ef9010d0958 R15: ffff8ef9186f98c8 FS: 0000000000000000(0000) GS:ffff8f000e240000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f48f5253a08 CR3: 00000003cb82e000 CR4: 00000000003506f0 Call Trace: <TASK> ? kernfs_remove_by_name_ns+0xb9/0xc0 ? __warn+0x7c/0x130 ? kernfs_remove_by_name_ns+0xb9/0xc0 ? report_bug+0x171/0x1a0 ? handle_bug+0x3c/0x70 ? exc_invalid_op+0x17/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? kernfs_remove_by_name_ns+0xb9/0xc0 ? kernfs_remove_by_name_ns+0xb9/0xc0 acpi_unbind_one+0x108/0x180 device_del+0x18b/0x490 ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f device_unregister+0xd/0x30 i2c_del_adapter.part.0+0x1bf/0x250 i2c_mux_del_adapters+0xa1/0xe0 i2c_device_remove+0x1e/0x80 device_release_driver_internal+0x19a/0x200 bus_remove_device+0xbf/0x100 device_del+0x157/0x490 ? __pfx_device_match_fwnode+0x10/0x10 ? srso_return_thunk+0x5/0x5f device_unregister+0xd/0x30 i2c_acpi_notify+0x10f/0x140 notifier_call_chain+0x58/0xd0 blocking_notifier_call_chain+0x3a/0x60 acpi_device_del_work_fn+0x85/0x1d0 process_one_work+0x134/0x2f0 worker_thread+0x2f0/0x410 ? __pfx_worker_thread+0x10/0x10 kthread+0xe3/0x110 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2f/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> ---[ end trace 0000000000000000 ]--- ... repeated 7 more times, 1 for each channel of the mux ... The issue is that the binding of the ACPI devices to their peer I2C adapters is not correctly cleaned up. Digging deeper into the issue we see that the deletion order is such that the ACPI devices matching the mux channel i2c adapters are deleted first during the SSDT overlay removal. For each of the channels we see a call to i2c_acpi_notify() with ACPI_RECONFIG_DEVICE_REMOVE but, because these devices are not actually i2c_clients, nothing is done for them. Later on, after each of the mux channels has been dealt with, we come to delete the i2c_client representing the PCA9548 device. This is the call stack we see above, whereby the kernel cleans up the i2c_client including destruction of the mux and its channel adapters. At this point we do attempt to unbind from the ACPI peers but those peers no longer exist and so we hit the kernfs errors. The fix is to augment i2c_acpi_notify() to handle i2c_adapters. But, given that the life cycle of the adapters is linked to the i2c_client, instead of deleting the i2c_adapters during the i2c_acpi_notify(), we just trigger unbinding of the ACPI device from the adapter device, and allow the clean up of the adapter to continue in the way it always has. Signed-off-by: Hamish Martin <hamish.martin(a)alliedtelesis.co.nz> Reviewed-by: Mika Westerberg <mika.westerberg(a)linux.intel.com> Reviewed-by: Andi Shyti <andi.shyti(a)kernel.org> Fixes: 525e6fabeae2 ("i2c / ACPI: add support for ACPI reconfigure notifications") Cc: <stable(a)vger.kernel.org> # v4.8+ Signed-off-by: Wolfram Sang <wsa+renesas(a)sang-engineering.com> diff --git a/drivers/i2c/i2c-core-acpi.c b/drivers/i2c/i2c-core-acpi.c index d6037a328669..14ae0cfc325e 100644 --- a/drivers/i2c/i2c-core-acpi.c +++ b/drivers/i2c/i2c-core-acpi.c @@ -445,6 +445,11 @@ static struct i2c_client *i2c_acpi_find_client_by_adev(struct acpi_device *adev) return i2c_find_device_by_fwnode(acpi_fwnode_handle(adev)); } +static struct i2c_adapter *i2c_acpi_find_adapter_by_adev(struct acpi_device *adev) +{ + return i2c_find_adapter_by_fwnode(acpi_fwnode_handle(adev)); +} + static int i2c_acpi_notify(struct notifier_block *nb, unsigned long value, void *arg) { @@ -471,11 +476,17 @@ static int i2c_acpi_notify(struct notifier_block *nb, unsigned long value, break; client = i2c_acpi_find_client_by_adev(adev); - if (!client) - break; + if (client) { + i2c_unregister_device(client); + put_device(&client->dev); + } + + adapter = i2c_acpi_find_adapter_by_adev(adev); + if (adapter) { + acpi_unbind_one(&adapter->dev); + put_device(&adapter->dev); + } - i2c_unregister_device(client); - put_device(&client->dev); break; }

8 months, 2 weeks

1
0
0 0

FAILED: patch "[PATCH] i2c: acpi: Unbind mux adapters before delete" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x 3f858bbf04dbac934ac279aaee05d49eb9910051 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024061317-avid-favoring-8698@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: 3f858bbf04db ("i2c: acpi: Unbind mux adapters before delete") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 3f858bbf04dbac934ac279aaee05d49eb9910051 Mon Sep 17 00:00:00 2001 From: Hamish Martin <hamish.martin(a)alliedtelesis.co.nz> Date: Wed, 13 Mar 2024 11:16:32 +1300 Subject: [PATCH] i2c: acpi: Unbind mux adapters before delete There is an issue with ACPI overlay table removal specifically related to I2C multiplexers. Consider an ACPI SSDT Overlay that defines a PCA9548 I2C mux on an existing I2C bus. When this table is loaded we see the creation of a device for the overall PCA9548 chip and 8 further devices - one i2c_adapter each for the mux channels. These are all bound to their ACPI equivalents via an eventual invocation of acpi_bind_one(). When we unload the SSDT overlay we run into the problem. The ACPI devices are deleted as normal via acpi_device_del_work_fn() and the acpi_device_del_list. However, the following warning and stack trace is output as the deletion does not go smoothly: ------------[ cut here ]------------ kernfs: can not remove 'physical_node', no directory WARNING: CPU: 1 PID: 11 at fs/kernfs/dir.c:1674 kernfs_remove_by_name_ns+0xb9/0xc0 Modules linked in: CPU: 1 PID: 11 Comm: kworker/u128:0 Not tainted 6.8.0-rc6+ #1 Hardware name: congatec AG conga-B7E3/conga-B7E3, BIOS 5.13 05/16/2023 Workqueue: kacpi_hotplug acpi_device_del_work_fn RIP: 0010:kernfs_remove_by_name_ns+0xb9/0xc0 Code: e4 00 48 89 ef e8 07 71 db ff 5b b8 fe ff ff ff 5d 41 5c 41 5d e9 a7 55 e4 00 0f 0b eb a6 48 c7 c7 f0 38 0d 9d e8 97 0a d5 ff <0f> 0b eb dc 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 RSP: 0018:ffff9f864008fb28 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff8ef90a8d4940 RCX: 0000000000000000 RDX: ffff8f000e267d10 RSI: ffff8f000e25c780 RDI: ffff8f000e25c780 RBP: ffff8ef9186f9870 R08: 0000000000013ffb R09: 00000000ffffbfff R10: 00000000ffffbfff R11: ffff8f000e0a0000 R12: ffff9f864008fb50 R13: ffff8ef90c93dd60 R14: ffff8ef9010d0958 R15: ffff8ef9186f98c8 FS: 0000000000000000(0000) GS:ffff8f000e240000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f48f5253a08 CR3: 00000003cb82e000 CR4: 00000000003506f0 Call Trace: <TASK> ? kernfs_remove_by_name_ns+0xb9/0xc0 ? __warn+0x7c/0x130 ? kernfs_remove_by_name_ns+0xb9/0xc0 ? report_bug+0x171/0x1a0 ? handle_bug+0x3c/0x70 ? exc_invalid_op+0x17/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? kernfs_remove_by_name_ns+0xb9/0xc0 ? kernfs_remove_by_name_ns+0xb9/0xc0 acpi_unbind_one+0x108/0x180 device_del+0x18b/0x490 ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f device_unregister+0xd/0x30 i2c_del_adapter.part.0+0x1bf/0x250 i2c_mux_del_adapters+0xa1/0xe0 i2c_device_remove+0x1e/0x80 device_release_driver_internal+0x19a/0x200 bus_remove_device+0xbf/0x100 device_del+0x157/0x490 ? __pfx_device_match_fwnode+0x10/0x10 ? srso_return_thunk+0x5/0x5f device_unregister+0xd/0x30 i2c_acpi_notify+0x10f/0x140 notifier_call_chain+0x58/0xd0 blocking_notifier_call_chain+0x3a/0x60 acpi_device_del_work_fn+0x85/0x1d0 process_one_work+0x134/0x2f0 worker_thread+0x2f0/0x410 ? __pfx_worker_thread+0x10/0x10 kthread+0xe3/0x110 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2f/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> ---[ end trace 0000000000000000 ]--- ... repeated 7 more times, 1 for each channel of the mux ... The issue is that the binding of the ACPI devices to their peer I2C adapters is not correctly cleaned up. Digging deeper into the issue we see that the deletion order is such that the ACPI devices matching the mux channel i2c adapters are deleted first during the SSDT overlay removal. For each of the channels we see a call to i2c_acpi_notify() with ACPI_RECONFIG_DEVICE_REMOVE but, because these devices are not actually i2c_clients, nothing is done for them. Later on, after each of the mux channels has been dealt with, we come to delete the i2c_client representing the PCA9548 device. This is the call stack we see above, whereby the kernel cleans up the i2c_client including destruction of the mux and its channel adapters. At this point we do attempt to unbind from the ACPI peers but those peers no longer exist and so we hit the kernfs errors. The fix is to augment i2c_acpi_notify() to handle i2c_adapters. But, given that the life cycle of the adapters is linked to the i2c_client, instead of deleting the i2c_adapters during the i2c_acpi_notify(), we just trigger unbinding of the ACPI device from the adapter device, and allow the clean up of the adapter to continue in the way it always has. Signed-off-by: Hamish Martin <hamish.martin(a)alliedtelesis.co.nz> Reviewed-by: Mika Westerberg <mika.westerberg(a)linux.intel.com> Reviewed-by: Andi Shyti <andi.shyti(a)kernel.org> Fixes: 525e6fabeae2 ("i2c / ACPI: add support for ACPI reconfigure notifications") Cc: <stable(a)vger.kernel.org> # v4.8+ Signed-off-by: Wolfram Sang <wsa+renesas(a)sang-engineering.com> diff --git a/drivers/i2c/i2c-core-acpi.c b/drivers/i2c/i2c-core-acpi.c index d6037a328669..14ae0cfc325e 100644 --- a/drivers/i2c/i2c-core-acpi.c +++ b/drivers/i2c/i2c-core-acpi.c @@ -445,6 +445,11 @@ static struct i2c_client *i2c_acpi_find_client_by_adev(struct acpi_device *adev) return i2c_find_device_by_fwnode(acpi_fwnode_handle(adev)); } +static struct i2c_adapter *i2c_acpi_find_adapter_by_adev(struct acpi_device *adev) +{ + return i2c_find_adapter_by_fwnode(acpi_fwnode_handle(adev)); +} + static int i2c_acpi_notify(struct notifier_block *nb, unsigned long value, void *arg) { @@ -471,11 +476,17 @@ static int i2c_acpi_notify(struct notifier_block *nb, unsigned long value, break; client = i2c_acpi_find_client_by_adev(adev); - if (!client) - break; + if (client) { + i2c_unregister_device(client); + put_device(&client->dev); + } + + adapter = i2c_acpi_find_adapter_by_adev(adev); + if (adapter) { + acpi_unbind_one(&adapter->dev); + put_device(&adapter->dev); + } - i2c_unregister_device(client); - put_device(&client->dev); break; }

8 months, 2 weeks

1
0
0 0

[PATCH] firmware: qcom_scm: Mark get_wq_ctx() as atomic call

by Unnathi Chalicheemala via B4 Relay

From: Murali Nalajala <quic_mnalajal(a)quicinc.com> Currently get_wq_ctx() is wrongly configured as a standard call. Here get_wq_ctx() must be an atomic call and can't be a standard SMC call because get_wq_ctx() should not sleep again. This situation lead to a deadlock. Hence mark get_wq_ctx() as atomic call. Fixes: 6bf325992236 ("firmware: qcom: scm: Add wait-queue handling logic") Cc: stable(a)vger.kernel.org Signed-off-by: Murali Nalajala <quic_mnalajal(a)quicinc.com> Signed-off-by: Unnathi Chalicheemala <quic_uchalich(a)quicinc.com> --- drivers/firmware/qcom/qcom_scm-smc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/firmware/qcom/qcom_scm-smc.c b/drivers/firmware/qcom/qcom_scm-smc.c index 16cf88acfa8e..0a2a2c794d0e 100644 --- a/drivers/firmware/qcom/qcom_scm-smc.c +++ b/drivers/firmware/qcom/qcom_scm-smc.c @@ -71,7 +71,7 @@ int scm_get_wq_ctx(u32 *wq_ctx, u32 *flags, u32 *more_pending) struct arm_smccc_res get_wq_res; struct arm_smccc_args get_wq_ctx = {0}; - get_wq_ctx.args[0] = ARM_SMCCC_CALL_VAL(ARM_SMCCC_STD_CALL, + get_wq_ctx.args[0] = ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, ARM_SMCCC_SMC_64, ARM_SMCCC_OWNER_SIP, SCM_SMC_FNID(QCOM_SCM_SVC_WAITQ, QCOM_SCM_WAITQ_GET_WQ_CTX)); --- base-commit: 83a7eefedc9b56fe7bfeff13b6c7356688ffa670 change-id: 20240611-get_wq_ctx_atomic-f5e9fdcb20c7 Best regards, -- Unnathi Chalicheemala <quic_uchalich(a)quicinc.com>

8 months, 2 weeks

2
1
0 0

FAILED: patch "[PATCH] HID: i2c-hid: elan: fix reset suspend current leakage" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x 0eafc58f2194dbd01d4be40f99a697681171995b # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024061323-deuce-expose-15f0@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: 0eafc58f2194 ("HID: i2c-hid: elan: fix reset suspend current leakage") f2f43bf15d7a ("HID: i2c-hid: elan: Add ili9882t timing") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 0eafc58f2194dbd01d4be40f99a697681171995b Mon Sep 17 00:00:00 2001 From: Johan Hovold <johan+linaro(a)kernel.org> Date: Tue, 7 May 2024 16:48:18 +0200 Subject: [PATCH] HID: i2c-hid: elan: fix reset suspend current leakage The Elan eKTH5015M touch controller found on the Lenovo ThinkPad X13s shares the VCC33 supply with other peripherals that may remain powered during suspend (e.g. when enabled as wakeup sources). The reset line is also wired so that it can be left deasserted when the supply is off. This is important as it avoids holding the controller in reset for extended periods of time when it remains powered, which can lead to increased power consumption, and also avoids leaking current through the X13s reset circuitry during suspend (and after driver unbind). Use the new 'no-reset-on-power-off' devicetree property to determine when reset needs to be asserted on power down. Notably this also avoids wasting power on machine variants without a touchscreen for which the driver would otherwise exit probe with reset asserted. Fixes: bd3cba00dcc6 ("HID: i2c-hid: elan: Add support for Elan eKTH6915 i2c-hid touchscreens") Cc: <stable(a)vger.kernel.org> # 6.0 Cc: Douglas Anderson <dianders(a)chromium.org> Tested-by: Steev Klimaszewski <steev(a)kali.org> Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> Reviewed-by: Douglas Anderson <dianders(a)chromium.org> Link: https://lore.kernel.org/r/20240507144821.12275-5-johan+linaro@kernel.org Signed-off-by: Benjamin Tissoires <bentiss(a)kernel.org> diff --git a/drivers/hid/i2c-hid/i2c-hid-of-elan.c b/drivers/hid/i2c-hid/i2c-hid-of-elan.c index 5b91fb106cfc..091e37933225 100644 --- a/drivers/hid/i2c-hid/i2c-hid-of-elan.c +++ b/drivers/hid/i2c-hid/i2c-hid-of-elan.c @@ -31,6 +31,7 @@ struct i2c_hid_of_elan { struct regulator *vcc33; struct regulator *vccio; struct gpio_desc *reset_gpio; + bool no_reset_on_power_off; const struct elan_i2c_hid_chip_data *chip_data; }; @@ -40,17 +41,17 @@ static int elan_i2c_hid_power_up(struct i2chid_ops *ops) container_of(ops, struct i2c_hid_of_elan, ops); int ret; + gpiod_set_value_cansleep(ihid_elan->reset_gpio, 1); + if (ihid_elan->vcc33) { ret = regulator_enable(ihid_elan->vcc33); if (ret) - return ret; + goto err_deassert_reset; } ret = regulator_enable(ihid_elan->vccio); - if (ret) { - regulator_disable(ihid_elan->vcc33); - return ret; - } + if (ret) + goto err_disable_vcc33; if (ihid_elan->chip_data->post_power_delay_ms) msleep(ihid_elan->chip_data->post_power_delay_ms); @@ -60,6 +61,15 @@ static int elan_i2c_hid_power_up(struct i2chid_ops *ops) msleep(ihid_elan->chip_data->post_gpio_reset_on_delay_ms); return 0; + +err_disable_vcc33: + if (ihid_elan->vcc33) + regulator_disable(ihid_elan->vcc33); +err_deassert_reset: + if (ihid_elan->no_reset_on_power_off) + gpiod_set_value_cansleep(ihid_elan->reset_gpio, 0); + + return ret; } static void elan_i2c_hid_power_down(struct i2chid_ops *ops) @@ -67,7 +77,14 @@ static void elan_i2c_hid_power_down(struct i2chid_ops *ops) struct i2c_hid_of_elan *ihid_elan = container_of(ops, struct i2c_hid_of_elan, ops); - gpiod_set_value_cansleep(ihid_elan->reset_gpio, 1); + /* + * Do not assert reset when the hardware allows for it to remain + * deasserted regardless of the state of the (shared) power supply to + * avoid wasting power when the supply is left on. + */ + if (!ihid_elan->no_reset_on_power_off) + gpiod_set_value_cansleep(ihid_elan->reset_gpio, 1); + if (ihid_elan->chip_data->post_gpio_reset_off_delay_ms) msleep(ihid_elan->chip_data->post_gpio_reset_off_delay_ms); @@ -79,6 +96,7 @@ static void elan_i2c_hid_power_down(struct i2chid_ops *ops) static int i2c_hid_of_elan_probe(struct i2c_client *client) { struct i2c_hid_of_elan *ihid_elan; + int ret; ihid_elan = devm_kzalloc(&client->dev, sizeof(*ihid_elan), GFP_KERNEL); if (!ihid_elan) @@ -93,21 +111,38 @@ static int i2c_hid_of_elan_probe(struct i2c_client *client) if (IS_ERR(ihid_elan->reset_gpio)) return PTR_ERR(ihid_elan->reset_gpio); + ihid_elan->no_reset_on_power_off = of_property_read_bool(client->dev.of_node, + "no-reset-on-power-off"); + ihid_elan->vccio = devm_regulator_get(&client->dev, "vccio"); - if (IS_ERR(ihid_elan->vccio)) - return PTR_ERR(ihid_elan->vccio); + if (IS_ERR(ihid_elan->vccio)) { + ret = PTR_ERR(ihid_elan->vccio); + goto err_deassert_reset; + } ihid_elan->chip_data = device_get_match_data(&client->dev); if (ihid_elan->chip_data->main_supply_name) { ihid_elan->vcc33 = devm_regulator_get(&client->dev, ihid_elan->chip_data->main_supply_name); - if (IS_ERR(ihid_elan->vcc33)) - return PTR_ERR(ihid_elan->vcc33); + if (IS_ERR(ihid_elan->vcc33)) { + ret = PTR_ERR(ihid_elan->vcc33); + goto err_deassert_reset; + } } - return i2c_hid_core_probe(client, &ihid_elan->ops, - ihid_elan->chip_data->hid_descriptor_address, 0); + ret = i2c_hid_core_probe(client, &ihid_elan->ops, + ihid_elan->chip_data->hid_descriptor_address, 0); + if (ret) + goto err_deassert_reset; + + return 0; + +err_deassert_reset: + if (ihid_elan->no_reset_on_power_off) + gpiod_set_value_cansleep(ihid_elan->reset_gpio, 0); + + return ret; } static const struct elan_i2c_hid_chip_data elan_ekth6915_chip_data = {

8 months, 2 weeks

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror June 2024