October 2025 - Linux-stable-mirror

[PATCH] PCI/sysfs: enforce single creation of sysfs entry for pdev

by Christian Marangi

In some specific scenario it's possible that the pci_create_resource_files() gets called multiple times and the created entry actually gets wrongly deleted with extreme case of having a NULL pointer dereference when the PCI is removed. This mainly happen due to bad timing where the PCI bus is adding PCI devices and at the same time the sysfs code is adding the entry causing double execution of the pci_create_resource_files function and kernel WARNING. To be more precise there is a race between the late_initcall of pci-sysfs with pci_sysfs_init and PCI bus.c pci_bus_add_device that also call pci_create_sysfs_dev_files. With correct amount of ""luck"" (or better say bad luck) pci_create_sysfs_dev_files in bus.c might be called with pci_sysfs_init is executing the loop. This has been reported multiple times and on multiple system, like imx6 system, ipq806x systems... To address this, imlement multiple improvement to the implementation: 1. Add a bool to pci_dev to flag when sysfs entry are created (sysfs_init) 2. Implement a simple completion to wait pci_sysfs_init execution. 3. Permit additional call of pci_create_sysfs_dev_files only after pci_sysfs_init has finished. With such logic in place, we address al kind of timing problem with minimal change to any driver. A notice worth to mention is that the remove function are not affected by this as the pci_remove_resource_files have enough check in place to always work and it's always called by pci_stop_dev. Cc: stable(a)vger.kernel.org Reported-by: Krzysztof Hałasa <khalasa(a)piap.pl> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=215515 Signed-off-by: Christian Marangi <ansuelsmth(a)gmail.com> --- drivers/pci/pci-sysfs.c | 34 +++++++++++++++++++++++++++++----- include/linux/pci.h | 1 + 2 files changed, 30 insertions(+), 5 deletions(-) diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index 71a36f57ef57..cab3aa27f947 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -14,6 +14,7 @@ */ #include <linux/bitfield.h> +#include <linux/completion.h> #include <linux/kernel.h> #include <linux/sched.h> #include <linux/pci.h> @@ -37,6 +38,7 @@ #endif static int sysfs_initialized; /* = 0 */ +static DECLARE_COMPLETION(sysfs_init_completion); /* show configuration fields */ #define pci_config_attr(field, format_string) \ @@ -1652,12 +1654,32 @@ static const struct attribute_group pci_dev_resource_resize_group = { .is_visible = resource_resize_is_visible, }; +static int __pci_create_sysfs_dev_files(struct pci_dev *pdev) +{ + int ret; + + ret = pci_create_resource_files(pdev); + if (ret) + return ret; + + /* on success set sysfs correctly created */ + pdev->sysfs_init = true; + return 0; +} + int __must_check pci_create_sysfs_dev_files(struct pci_dev *pdev) { if (!sysfs_initialized) return -EACCES; - return pci_create_resource_files(pdev); + /* sysfs entry already created */ + if (pdev->sysfs_init) + return 0; + + /* wait for pci_sysfs_init */ + wait_for_completion(&sysfs_init_completion); + + return __pci_create_sysfs_dev_files(pdev); } /** @@ -1678,21 +1700,23 @@ static int __init pci_sysfs_init(void) { struct pci_dev *pdev = NULL; struct pci_bus *pbus = NULL; - int retval; + int retval = 0; sysfs_initialized = 1; for_each_pci_dev(pdev) { - retval = pci_create_sysfs_dev_files(pdev); + retval = __pci_create_sysfs_dev_files(pdev); if (retval) { pci_dev_put(pdev); - return retval; + goto exit; } } while ((pbus = pci_find_next_bus(pbus))) pci_create_legacy_files(pbus); - return 0; +exit: + complete_all(&sysfs_init_completion); + return retval; } late_initcall(pci_sysfs_init); diff --git a/include/linux/pci.h b/include/linux/pci.h index f3f6d6dee3ae..f417a0528f01 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -480,6 +480,7 @@ struct pci_dev { unsigned int non_mappable_bars:1; /* BARs can't be mapped to user-space */ pci_dev_flags_t dev_flags; atomic_t enable_cnt; /* pci_enable_device has been called */ + bool sysfs_init; /* sysfs entry has been created */ spinlock_t pcie_cap_lock; /* Protects RMW ops in capability accessors */ u32 saved_config_space[16]; /* Config space saved at suspend time */ -- 2.51.0

3 weeks, 5 days

2
1
0 0

[PATCH v3 bpf 1/3] ftrace: Fix BPF fexit with livepatch

by Song Liu

When livepatch is attached to the same function as bpf trampoline with a fexit program, bpf trampoline code calls register_ftrace_direct() twice. The first time will fail with -EAGAIN, and the second time it will succeed. This requires register_ftrace_direct() to unregister the address on the first attempt. Otherwise, the bpf trampoline cannot attach. Here is an easy way to reproduce this issue: insmod samples/livepatch/livepatch-sample.ko bpftrace -e 'fexit:cmdline_proc_show {}' ERROR: Unable to attach probe: fexit:vmlinux:cmdline_proc_show... Fix this by cleaning up the hash when register_ftrace_function_nolock hits errors. Also, move the code that resets ops->func and ops->trampoline to the error path of register_ftrace_direct(). Fixes: d05cb470663a ("ftrace: Fix modification of direct_function hash while in use") Cc: stable(a)vger.kernel.org # v6.6+ Reported-by: Andrey Grodzovsky <andrey.grodzovsky(a)crowdstrike.com> Closes: https://lore.kernel.org/live-patching/c5058315a39d4615b333e485893345be@crow… Cc: Steven Rostedt (Google) <rostedt(a)goodmis.org> Cc: Masami Hiramatsu (Google) <mhiramat(a)kernel.org> Acked-and-tested-by: Andrey Grodzovsky <andrey.grodzovsky(a)crowdstrike.com> Signed-off-by: Song Liu <song(a)kernel.org> --- kernel/bpf/trampoline.c | 5 ----- kernel/trace/ftrace.c | 6 ++++++ 2 files changed, 6 insertions(+), 5 deletions(-) diff --git a/kernel/bpf/trampoline.c b/kernel/bpf/trampoline.c index 5949095e51c3..f2cb0b097093 100644 --- a/kernel/bpf/trampoline.c +++ b/kernel/bpf/trampoline.c @@ -479,11 +479,6 @@ static int bpf_trampoline_update(struct bpf_trampoline *tr, bool lock_direct_mut * BPF_TRAMP_F_SHARE_IPMODIFY is set, we can generate the * trampoline again, and retry register. */ - /* reset fops->func and fops->trampoline for re-register */ - tr->fops->func = NULL; - tr->fops->trampoline = 0; - - /* free im memory and reallocate later */ bpf_tramp_image_free(im); goto again; } diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 42bd2ba68a82..725c224fb4e6 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -6048,6 +6048,12 @@ int register_ftrace_direct(struct ftrace_ops *ops, unsigned long addr) ops->direct_call = addr; err = register_ftrace_function_nolock(ops); + if (err) { + /* cleanup for possible another register call */ + ops->func = NULL; + ops->trampoline = 0; + remove_direct_functions_hash(hash, addr); + } out_unlock: mutex_unlock(&direct_mutex); -- 2.47.3

3 weeks, 5 days

4
4
0 0

FAILED: patch "[PATCH] mptcp: pm: in-kernel: C-flag: handle late ADD_ADDR" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x e84cb860ac3ce67ec6ecc364433fd5b412c448bc # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025102642-improper-revered-93ac@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From e84cb860ac3ce67ec6ecc364433fd5b412c448bc Mon Sep 17 00:00:00 2001 From: "Matthieu Baerts (NGI0)" <matttbe(a)kernel.org> Date: Mon, 20 Oct 2025 22:53:26 +0200 Subject: [PATCH] mptcp: pm: in-kernel: C-flag: handle late ADD_ADDR The special C-flag case expects the ADD_ADDR to be received when switching to 'fully-established'. But for various reasons, the ADD_ADDR could be sent after the "4th ACK", and the special case doesn't work. On NIPA, the new test validating this special case for the C-flag failed a few times, e.g. 102 default limits, server deny join id 0 syn rx [FAIL] got 0 JOIN[s] syn rx expected 2 Server ns stats (...) MPTcpExtAddAddrTx 1 MPTcpExtEchoAdd 1 Client ns stats (...) MPTcpExtAddAddr 1 MPTcpExtEchoAddTx 1 synack rx [FAIL] got 0 JOIN[s] synack rx expected 2 ack rx [FAIL] got 0 JOIN[s] ack rx expected 2 join Rx [FAIL] see above syn tx [FAIL] got 0 JOIN[s] syn tx expected 2 join Tx [FAIL] see above I had a suspicion about what the issue could be: the ADD_ADDR might have been received after the switch to the 'fully-established' state. The issue was not easy to reproduce. The packet capture shown that the ADD_ADDR can indeed be sent with a delay, and the client would not try to establish subflows to it as expected. A simple fix is not to mark the endpoints as 'used' in the C-flag case, when looking at creating subflows to the remote initial IP address and port. In this case, there is no need to try. Note: newly added fullmesh endpoints will still continue to be used as expected, thanks to the conditions behind mptcp_pm_add_addr_c_flag_case. Fixes: 4b1ff850e0c1 ("mptcp: pm: in-kernel: usable client side with C-flag") Cc: stable(a)vger.kernel.org Reviewed-by: Geliang Tang <geliang(a)kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> Link: https://patch.msgid.link/20251020-net-mptcp-c-flag-late-add-addr-v1-1-82070… Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> diff --git a/net/mptcp/pm_kernel.c b/net/mptcp/pm_kernel.c index e0f44dc232aa..2ae95476dba3 100644 --- a/net/mptcp/pm_kernel.c +++ b/net/mptcp/pm_kernel.c @@ -370,6 +370,10 @@ static void mptcp_pm_create_subflow_or_signal_addr(struct mptcp_sock *msk) } subflow: + /* No need to try establishing subflows to remote id0 if not allowed */ + if (mptcp_pm_add_addr_c_flag_case(msk)) + goto exit; + /* check if should create a new subflow */ while (msk->pm.local_addr_used < endp_subflow_max && msk->pm.extra_subflows < limit_extra_subflows) { @@ -401,6 +405,8 @@ static void mptcp_pm_create_subflow_or_signal_addr(struct mptcp_sock *msk) __mptcp_subflow_connect(sk, &local, &addrs[i]); spin_lock_bh(&msk->pm.lock); } + +exit: mptcp_pm_nl_check_work_pending(msk); }

3 weeks, 5 days

2
1
0 0

FAILED: patch "[PATCH] xhci: dbc: fix bogus 1024 byte prefix if ttyDBC read races" failed to apply to 6.6-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.6-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y git checkout FETCH_HEAD git cherry-pick -x f3d12ec847b945d5d65846c85f062d07d5e73164 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025102712-unearned-duplicate-8c3b@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From f3d12ec847b945d5d65846c85f062d07d5e73164 Mon Sep 17 00:00:00 2001 From: Mathias Nyman <mathias.nyman(a)linux.intel.com> Date: Tue, 14 Oct 2025 01:55:41 +0300 Subject: [PATCH] xhci: dbc: fix bogus 1024 byte prefix if ttyDBC read races with stall event MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit DbC may add 1024 bogus bytes to the beginneing of the receiving endpoint if DbC hw triggers a STALL event before any Transfer Blocks (TRBs) for incoming data are queued, but driver handles the event after it queued the TRBs. This is possible as xHCI DbC hardware may trigger spurious STALL transfer events even if endpoint is empty. The STALL event contains a pointer to the stalled TRB, and "remaining" untransferred data length. As there are no TRBs queued yet the STALL event will just point to first TRB position of the empty ring, with '0' bytes remaining untransferred. DbC driver is polling for events, and may not handle the STALL event before /dev/ttyDBC0 is opened and incoming data TRBs are queued. The DbC event handler will now assume the first queued TRB (length 1024) has stalled with '0' bytes remaining untransferred, and copies the data This race situation can be practically mitigated by making sure the event handler handles all pending transfer events when DbC reaches configured state, and only then create dev/ttyDbC0, and start queueing transfers. The event handler can this way detect the STALL events on empty rings and discard them before any transfers are queued. This does in practice solve the issue, but still leaves a small possible gap for the race to trigger. We still need a way to distinguish spurious STALLs on empty rings with '0' bytes remaing, from actual STALL events with all bytes transmitted. Cc: stable <stable(a)kernel.org> Fixes: dfba2174dc42 ("usb: xhci: Add DbC support in xHCI driver") Tested-by: Łukasz Bartosik <ukaszb(a)chromium.org> Signed-off-by: Mathias Nyman <mathias.nyman(a)linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/usb/host/xhci-dbgcap.c b/drivers/usb/host/xhci-dbgcap.c index 63edf2d8f245..023a8ec6f305 100644 --- a/drivers/usb/host/xhci-dbgcap.c +++ b/drivers/usb/host/xhci-dbgcap.c @@ -892,7 +892,8 @@ static enum evtreturn xhci_dbc_do_handle_events(struct xhci_dbc *dbc) dev_info(dbc->dev, "DbC configured\n"); portsc = readl(&dbc->regs->portsc); writel(portsc, &dbc->regs->portsc); - return EVT_GSER; + ret = EVT_GSER; + break; } return EVT_DONE; @@ -954,7 +955,8 @@ static enum evtreturn xhci_dbc_do_handle_events(struct xhci_dbc *dbc) break; case TRB_TYPE(TRB_TRANSFER): dbc_handle_xfer_event(dbc, evt); - ret = EVT_XFER_DONE; + if (ret != EVT_GSER) + ret = EVT_XFER_DONE; break; default: break;

3 weeks, 5 days

2
5
0 0

FAILED: patch "[PATCH] dt-bindings: usb: dwc3-imx8mp: dma-range is required only for" failed to apply to 5.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x 268eb6fb908bc82ce479e4dba9a2cad11f536c9c # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025102701-congrats-attire-807b@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 268eb6fb908bc82ce479e4dba9a2cad11f536c9c Mon Sep 17 00:00:00 2001 From: Xu Yang <xu.yang_2(a)nxp.com> Date: Fri, 19 Sep 2025 14:25:34 +0800 Subject: [PATCH] dt-bindings: usb: dwc3-imx8mp: dma-range is required only for imx8mp Only i.MX8MP need dma-range property to let USB controller work properly. Remove dma-range from required list and add limitation for imx8mp. Fixes: d2a704e29711 ("dt-bindings: usb: dwc3-imx8mp: add imx8mp dwc3 glue bindings") Cc: stable <stable(a)kernel.org> Reviewed-by: Jun Li <jun.li(a)nxp.com> Signed-off-by: Xu Yang <xu.yang_2(a)nxp.com> Reviewed-by: Frank Li <Frank.Li(a)nxp.com> Acked-by: Conor Dooley <conor.dooley(a)microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml b/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml index baf130669c38..73e7a60a0060 100644 --- a/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml @@ -89,13 +89,21 @@ required: - reg - "#address-cells" - "#size-cells" - - dma-ranges - ranges - clocks - clock-names - interrupts - power-domains +allOf: + - if: + properties: + compatible: + const: fsl,imx8mp-dwc3 + then: + required: + - dma-ranges + additionalProperties: false examples:

3 weeks, 5 days

2
1
0 0

FAILED: patch "[PATCH] mptcp: pm: in-kernel: C-flag: handle late ADD_ADDR" failed to apply to 6.6-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.6-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y git checkout FETCH_HEAD git cherry-pick -x e84cb860ac3ce67ec6ecc364433fd5b412c448bc # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025102638-brewery-wanting-8089@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From e84cb860ac3ce67ec6ecc364433fd5b412c448bc Mon Sep 17 00:00:00 2001 From: "Matthieu Baerts (NGI0)" <matttbe(a)kernel.org> Date: Mon, 20 Oct 2025 22:53:26 +0200 Subject: [PATCH] mptcp: pm: in-kernel: C-flag: handle late ADD_ADDR The special C-flag case expects the ADD_ADDR to be received when switching to 'fully-established'. But for various reasons, the ADD_ADDR could be sent after the "4th ACK", and the special case doesn't work. On NIPA, the new test validating this special case for the C-flag failed a few times, e.g. 102 default limits, server deny join id 0 syn rx [FAIL] got 0 JOIN[s] syn rx expected 2 Server ns stats (...) MPTcpExtAddAddrTx 1 MPTcpExtEchoAdd 1 Client ns stats (...) MPTcpExtAddAddr 1 MPTcpExtEchoAddTx 1 synack rx [FAIL] got 0 JOIN[s] synack rx expected 2 ack rx [FAIL] got 0 JOIN[s] ack rx expected 2 join Rx [FAIL] see above syn tx [FAIL] got 0 JOIN[s] syn tx expected 2 join Tx [FAIL] see above I had a suspicion about what the issue could be: the ADD_ADDR might have been received after the switch to the 'fully-established' state. The issue was not easy to reproduce. The packet capture shown that the ADD_ADDR can indeed be sent with a delay, and the client would not try to establish subflows to it as expected. A simple fix is not to mark the endpoints as 'used' in the C-flag case, when looking at creating subflows to the remote initial IP address and port. In this case, there is no need to try. Note: newly added fullmesh endpoints will still continue to be used as expected, thanks to the conditions behind mptcp_pm_add_addr_c_flag_case. Fixes: 4b1ff850e0c1 ("mptcp: pm: in-kernel: usable client side with C-flag") Cc: stable(a)vger.kernel.org Reviewed-by: Geliang Tang <geliang(a)kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> Link: https://patch.msgid.link/20251020-net-mptcp-c-flag-late-add-addr-v1-1-82070… Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> diff --git a/net/mptcp/pm_kernel.c b/net/mptcp/pm_kernel.c index e0f44dc232aa..2ae95476dba3 100644 --- a/net/mptcp/pm_kernel.c +++ b/net/mptcp/pm_kernel.c @@ -370,6 +370,10 @@ static void mptcp_pm_create_subflow_or_signal_addr(struct mptcp_sock *msk) } subflow: + /* No need to try establishing subflows to remote id0 if not allowed */ + if (mptcp_pm_add_addr_c_flag_case(msk)) + goto exit; + /* check if should create a new subflow */ while (msk->pm.local_addr_used < endp_subflow_max && msk->pm.extra_subflows < limit_extra_subflows) { @@ -401,6 +405,8 @@ static void mptcp_pm_create_subflow_or_signal_addr(struct mptcp_sock *msk) __mptcp_subflow_connect(sk, &local, &addrs[i]); spin_lock_bh(&msk->pm.lock); } + +exit: mptcp_pm_nl_check_work_pending(msk); }

3 weeks, 5 days

2
1
0 0

FAILED: patch "[PATCH] xfs: always warn about deprecated mount options" failed to apply to 6.12-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.12-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y git checkout FETCH_HEAD git cherry-pick -x 630785bfbe12c3ee3ebccd8b530a98d632b7e39d # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025102645-oblivion-whoopee-576c@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 630785bfbe12c3ee3ebccd8b530a98d632b7e39d Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" <djwong(a)kernel.org> Date: Tue, 21 Oct 2025 11:30:12 -0700 Subject: [PATCH] xfs: always warn about deprecated mount options The deprecation of the 'attr2' mount option in 6.18 wasn't entirely successful because nobody noticed that the kernel never printed a warning about attr2 being set in fstab if the only xfs filesystem is the root fs; the initramfs mounts the root fs with no mount options; and the init scripts only conveyed the fstab options by remounting the root fs. Fix this by making it complain all the time. Cc: stable(a)vger.kernel.org # v5.13 Fixes: 92cf7d36384b99 ("xfs: Skip repetitive warnings about mount options") Signed-off-by: Darrick J. Wong <djwong(a)kernel.org> Reviewed-by: Christoph Hellwig <hch(a)lst.de> Reviewed-by: Carlos Maiolino <cmaiolino(a)redhat.com> Signed-off-by: Carlos Maiolino <cem(a)kernel.org> diff --git a/fs/xfs/xfs_super.c b/fs/xfs/xfs_super.c index 9d51186b24dd..c53f2edf92e7 100644 --- a/fs/xfs/xfs_super.c +++ b/fs/xfs/xfs_super.c @@ -1379,16 +1379,25 @@ suffix_kstrtoull( static inline void xfs_fs_warn_deprecated( struct fs_context *fc, - struct fs_parameter *param, - uint64_t flag, - bool value) + struct fs_parameter *param) { - /* Don't print the warning if reconfiguring and current mount point - * already had the flag set + /* + * Always warn about someone passing in a deprecated mount option. + * Previously we wouldn't print the warning if we were reconfiguring + * and current mount point already had the flag set, but that was not + * the right thing to do. + * + * Many distributions mount the root filesystem with no options in the + * initramfs and rely on mount -a to remount the root fs with the + * options in fstab. However, the old behavior meant that there would + * never be a warning about deprecated mount options for the root fs in + * /etc/fstab. On a single-fs system, that means no warning at all. + * + * Compounding this problem are distribution scripts that copy + * /proc/mounts to fstab, which means that we can't remove mount + * options unless we're 100% sure they have only ever been advertised + * in /proc/mounts in response to explicitly provided mount options. */ - if ((fc->purpose & FS_CONTEXT_FOR_RECONFIGURE) && - !!(XFS_M(fc->root->d_sb)->m_features & flag) == value) - return; xfs_warn(fc->s_fs_info, "%s mount option is deprecated.", param->key); }

3 weeks, 5 days

3
2
0 0

, conoce mejor a tu candidato antes de contratar

by Valeria Pérez

Evaluaciones Psicométricas para RR.HH. body { margin: 0; padding: 0; font-family: Arial, Helvetica, sans-serif; font-size: 14px; color: #333; background-color: #ffffff; } table { border-spacing: 0; width: 100%; max-width: 600px; margin: auto; } td { padding: 12px 20px; } a { color: #1a73e8; text-decoration: none; } .footer { font-size: 12px; color: #888888; text-align: center; } Mejora tus procesos de selección con evaluaciones psicométricas fáciles y confiables. Hola, , Sabemos que encontrar al candidato ideal va más allá del currículum. Por eso quiero contarte brevemente sobre PsicoSmart, una plataforma que ayuda a equipos de RR.HH. a evaluar talento con pruebas psicométricas rápidas, confiables y fáciles de aplicar. Con PsicoSmart puedes: Aplicar evaluaciones psicométricas 100% en línea. Elegir entre más de 31 pruebas psicométricas Generar reportes automáticos, visuales y fáciles de interpretar. Comparar resultados entre candidatos en segundos. Ahorrar horas valiosas del proceso de selección. Si estás buscando mejorar tus contrataciones, te lo recomiendo muchísimo. Si quieres conocer más puedes responder este correo o simplemente contactarme, mis datos están abajo. Saludos, ----------------------------- Atte.: Valeria Pérez Ciudad de México: (55) 5018 0565 WhatsApp: +52 33 1607 2089 Si no deseas recibir más correos, haz clic aquí para darte de baja. Para remover su dirección de esta lista haga <a href="https://s1.arrobamail.com/unsuscribe.php?id=yiwtsrewisppyseup">click aquí</a>

3 weeks, 5 days

1
0
0 0

, el clima laboral también se gestiona

by Daniel Rodríguez

Mejora el clima organizacional body { margin: 0; padding: 0; font-family: Arial, Helvetica, sans-serif; font-size: 14px; color: #333; background-color: #ffffff; } table { border-spacing: 0; width: 100%; max-width: 600px; margin: auto; } td { padding: 12px 20px; } a { color: #1a73e8; text-decoration: none; } .footer { font-size: 12px; color: #888888; text-align: center; } Diagnostica el clima y cultura de tu organización con Vorecol Work Environment. Hola, , El desempeño de un equipo no solo depende del talento individual, también del entorno en el que trabaja. Muchas veces, los problemas de rotación o bajo compromiso tienen raíces invisibles... hasta que se miden. Por eso quiero presentarte Vorecol Work Environment, una herramienta diseñada para ayudarte a comprender mejor cómo se vive la cultura y el clima dentro de tu organización. Con Vorecol puedes: Aplicar evaluaciones periódicas de clima y cultura organizacional, personalizadas a tu contexto. Obtener resultados organizados por áreas, con alertas sobre temas críticos como liderazgo, carga laboral o reconocimiento. Acceder a paneles dinámicos que te permiten visualizar tendencias, puntos de mejora y fortalezas de forma clara. Ideal para organizaciones que quieren escuchar más, reaccionar mejor y construir un entorno donde las personas quieran quedarse. Si estás buscando mejorar tu ambiente laboral, vale la pena considerarlo. Si quieres conocer más puedes responder este correo o simplemente contactarme, mis datos están abajo. Saludos, -------------- Atte.: Daniel Rodríguez Ciudad de México: (55) 5018 0565 WhatsApp: +52 33 1607 2089 Si no deseas recibir más correos, haz clic aquí para darte de baja. Para remover su dirección de esta lista haga <a href="https://s1.arrobamail.com/unsuscribe.php?id=yiwtsrewisppuseup">click aquí</a>

3 weeks, 5 days

1
0
0 0

[PATCH] media: c8sectpfe: fix probe device leaks

by Johan Hovold

Make sure to drop the references taken to the I2C adapters during probe on probe failure (e.g. probe deferral) and on driver unbind. Fixes: c5f5d0f99794 ("[media] c8sectpfe: STiH407/10 Linux DVB demux support") Cc: stable(a)vger.kernel.org # 4.3 Cc: Peter Griffin <peter.griffin(a)linaro.org> Signed-off-by: Johan Hovold <johan(a)kernel.org> --- .../media/platform/st/sti/c8sectpfe/c8sectpfe-core.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/media/platform/st/sti/c8sectpfe/c8sectpfe-core.c b/drivers/media/platform/st/sti/c8sectpfe/c8sectpfe-core.c index 89bd15a4d26a..3f94d9b4ef1e 100644 --- a/drivers/media/platform/st/sti/c8sectpfe/c8sectpfe-core.c +++ b/drivers/media/platform/st/sti/c8sectpfe/c8sectpfe-core.c @@ -655,6 +655,13 @@ static irqreturn_t c8sectpfe_error_irq_handler(int irq, void *priv) return IRQ_HANDLED; } +static void c8sectpfe_put_device(void *_dev) +{ + struct device *dev = _dev; + + put_device(dev); +} + static int c8sectpfe_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -799,6 +806,11 @@ static int c8sectpfe_probe(struct platform_device *pdev) return -ENODEV; } + ret = devm_add_action_or_reset(dev, c8sectpfe_put_device, + &tsin->i2c_adapter->dev); + if (ret) + return ret; + /* Acquire reset GPIO and activate it */ tsin->rst_gpio = devm_fwnode_gpiod_get(dev, of_fwnode_handle(child), -- 2.49.1

3 weeks, 5 days

3
4
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror October 2025