February 2025 - Linux-stable-mirror

[PATCH v4 1/5] KVM: arm64: Set HCR_EL2.TID1 unconditionally

by Oliver Upton

commit 90807748ca3a ("KVM: arm64: Hide SME system registers from guests") added trap handling for SMIDR_EL1, treating it as UNDEFINED as KVM does not support SME. This is right for the most part, however KVM needs to set HCR_EL2.TID1 to _actually_ trap the register. Unfortunately, this comes with some collateral damage as TID1 forces REVIDR_EL1 and AIDR_EL1 to trap as well. KVM has long treated these registers as "invariant" which is an awful term for the following: - Userspace sees the boot CPU values on all vCPUs - The guest sees the hardware values of the CPU on which a vCPU is scheduled Keep the plates spinning by adding trap handling for the affected registers and repaint all of the "invariant" crud into terms of identifying an implementation. Yes, at this point we only need to set TID1 on SME hardware, but REVIDR_EL1 and AIDR_EL1 are about to become mutable anyway. Cc: Mark Brown <broonie(a)kernel.org> Cc: stable(a)vger.kernel.org Fixes: 90807748ca3a ("KVM: arm64: Hide SME system registers from guests") Signed-off-by: Oliver Upton <oliver.upton(a)linux.dev> --- arch/arm64/include/asm/kvm_arm.h | 4 +- arch/arm64/kvm/sys_regs.c | 175 ++++++++++++++++--------------- 2 files changed, 94 insertions(+), 85 deletions(-) diff --git a/arch/arm64/include/asm/kvm_arm.h b/arch/arm64/include/asm/kvm_arm.h index 8d94a6c0ed5c..b01c01e55de5 100644 --- a/arch/arm64/include/asm/kvm_arm.h +++ b/arch/arm64/include/asm/kvm_arm.h @@ -92,12 +92,12 @@ * SWIO: Turn set/way invalidates into set/way clean+invalidate * PTW: Take a stage2 fault if a stage1 walk steps in device memory * TID3: Trap EL1 reads of group 3 ID registers - * TID2: Trap CTR_EL0, CCSIDR2_EL1, CLIDR_EL1, and CSSELR_EL1 + * TID1: Trap REVIDR_EL1, AIDR_EL1, and SMIDR_EL1 */ #define HCR_GUEST_FLAGS (HCR_TSC | HCR_TSW | HCR_TWE | HCR_TWI | HCR_VM | \ HCR_BSU_IS | HCR_FB | HCR_TACR | \ HCR_AMO | HCR_SWIO | HCR_TIDCP | HCR_RW | HCR_TLOR | \ - HCR_FMO | HCR_IMO | HCR_PTW | HCR_TID3) + HCR_FMO | HCR_IMO | HCR_PTW | HCR_TID3 | HCR_TID1) #define HCR_HOST_NVHE_FLAGS (HCR_RW | HCR_API | HCR_APK | HCR_ATA) #define HCR_HOST_NVHE_PROTECTED_FLAGS (HCR_HOST_NVHE_FLAGS | HCR_TSC) #define HCR_HOST_VHE_FLAGS (HCR_RW | HCR_TGE | HCR_E2H) diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c index f6cd1ea7fb55..f25a157622e3 100644 --- a/arch/arm64/kvm/sys_regs.c +++ b/arch/arm64/kvm/sys_regs.c @@ -2483,6 +2483,93 @@ static bool access_mdcr(struct kvm_vcpu *vcpu, return true; } +/* + * For historical (ahem ABI) reasons, KVM treats MIDR_EL1, REVIDR_EL1, and + * AIDR_EL1 as "invariant" registers, meaning userspace cannot change them. + * The values made visible to userspace were the register values of the boot + * CPU. + * + * At the same time, reads from these registers at EL1 previously were not + * trapped, allowing the guest to read the actual hardware value. On big-little + * machines, this means the VM can see different values depending on where a + * given vCPU got scheduled. + * + * These registers are now trapped as collateral damage from SME, and what + * follows attempts to give a user / guest view consistent with the existing + * ABI. + */ +static bool access_imp_id_reg(struct kvm_vcpu *vcpu, + struct sys_reg_params *p, + const struct sys_reg_desc *r) +{ + if (p->is_write) + return write_to_read_only(vcpu, p, r); + + switch (reg_to_encoding(r)) { + case SYS_REVIDR_EL1: + p->regval = read_sysreg(revidr_el1); + break; + case SYS_AIDR_EL1: + p->regval = read_sysreg(aidr_el1); + break; + default: + WARN_ON_ONCE(1); + } + + return true; +} + +static u64 __ro_after_init boot_cpu_midr_val; +static u64 __ro_after_init boot_cpu_revidr_val; +static u64 __ro_after_init boot_cpu_aidr_val; + +static void init_imp_id_regs(void) +{ + boot_cpu_midr_val = read_sysreg(midr_el1); + boot_cpu_revidr_val = read_sysreg(revidr_el1); + boot_cpu_aidr_val = read_sysreg(aidr_el1); +} + +static int get_imp_id_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r, + u64 *val) +{ + switch (reg_to_encoding(r)) { + case SYS_MIDR_EL1: + *val = boot_cpu_midr_val; + break; + case SYS_REVIDR_EL1: + *val = boot_cpu_revidr_val; + break; + case SYS_AIDR_EL1: + *val = boot_cpu_aidr_val; + break; + default: + WARN_ON_ONCE(1); + return -EINVAL; + } + + return 0; +} + +static int set_imp_id_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r, + u64 val) +{ + u64 expected; + int ret; + + ret = get_imp_id_reg(vcpu, r, &expected); + if (ret) + return ret; + + return (expected == val) ? 0 : -EINVAL; +} + +#define IMPLEMENTATION_ID(reg) { \ + SYS_DESC(SYS_##reg), \ + .access = access_imp_id_reg, \ + .get_user = get_imp_id_reg, \ + .set_user = set_imp_id_reg, \ +} /* * Architected system registers. @@ -2532,7 +2619,9 @@ static const struct sys_reg_desc sys_reg_descs[] = { { SYS_DESC(SYS_DBGVCR32_EL2), undef_access, reset_val, DBGVCR32_EL2, 0 }, + IMPLEMENTATION_ID(MIDR_EL1), { SYS_DESC(SYS_MPIDR_EL1), NULL, reset_mpidr, MPIDR_EL1 }, + IMPLEMENTATION_ID(REVIDR_EL1), /* * ID regs: all ID_SANITISED() entries here must have corresponding @@ -2804,6 +2893,7 @@ static const struct sys_reg_desc sys_reg_descs[] = { .set_user = set_clidr, .val = ~CLIDR_EL1_RES0 }, { SYS_DESC(SYS_CCSIDR2_EL1), undef_access }, { SYS_DESC(SYS_SMIDR_EL1), undef_access }, + IMPLEMENTATION_ID(AIDR_EL1), { SYS_DESC(SYS_CSSELR_EL1), access_csselr, reset_unknown, CSSELR_EL1 }, ID_FILTERED(CTR_EL0, ctr_el0, CTR_EL0_DIC_MASK | @@ -4568,65 +4658,6 @@ id_to_sys_reg_desc(struct kvm_vcpu *vcpu, u64 id, return r; } -/* - * These are the invariant sys_reg registers: we let the guest see the - * host versions of these, so they're part of the guest state. - * - * A future CPU may provide a mechanism to present different values to - * the guest, or a future kvm may trap them. - */ - -#define FUNCTION_INVARIANT(reg) \ - static u64 reset_##reg(struct kvm_vcpu *v, \ - const struct sys_reg_desc *r) \ - { \ - ((struct sys_reg_desc *)r)->val = read_sysreg(reg); \ - return ((struct sys_reg_desc *)r)->val; \ - } - -FUNCTION_INVARIANT(midr_el1) -FUNCTION_INVARIANT(revidr_el1) -FUNCTION_INVARIANT(aidr_el1) - -/* ->val is filled in by kvm_sys_reg_table_init() */ -static struct sys_reg_desc invariant_sys_regs[] __ro_after_init = { - { SYS_DESC(SYS_MIDR_EL1), NULL, reset_midr_el1 }, - { SYS_DESC(SYS_REVIDR_EL1), NULL, reset_revidr_el1 }, - { SYS_DESC(SYS_AIDR_EL1), NULL, reset_aidr_el1 }, -}; - -static int get_invariant_sys_reg(u64 id, u64 __user *uaddr) -{ - const struct sys_reg_desc *r; - - r = get_reg_by_id(id, invariant_sys_regs, - ARRAY_SIZE(invariant_sys_regs)); - if (!r) - return -ENOENT; - - return put_user(r->val, uaddr); -} - -static int set_invariant_sys_reg(u64 id, u64 __user *uaddr) -{ - const struct sys_reg_desc *r; - u64 val; - - r = get_reg_by_id(id, invariant_sys_regs, - ARRAY_SIZE(invariant_sys_regs)); - if (!r) - return -ENOENT; - - if (get_user(val, uaddr)) - return -EFAULT; - - /* This is what we mean by invariant: you can't change it. */ - if (r->val != val) - return -EINVAL; - - return 0; -} - static int demux_c15_get(struct kvm_vcpu *vcpu, u64 id, void __user *uaddr) { u32 val; @@ -4708,15 +4739,10 @@ int kvm_sys_reg_get_user(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg, int kvm_arm_sys_reg_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) { void __user *uaddr = (void __user *)(unsigned long)reg->addr; - int err; if ((reg->id & KVM_REG_ARM_COPROC_MASK) == KVM_REG_ARM_DEMUX) return demux_c15_get(vcpu, reg->id, uaddr); - err = get_invariant_sys_reg(reg->id, uaddr); - if (err != -ENOENT) - return err; - return kvm_sys_reg_get_user(vcpu, reg, sys_reg_descs, ARRAY_SIZE(sys_reg_descs)); } @@ -4752,15 +4778,10 @@ int kvm_sys_reg_set_user(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg, int kvm_arm_sys_reg_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) { void __user *uaddr = (void __user *)(unsigned long)reg->addr; - int err; if ((reg->id & KVM_REG_ARM_COPROC_MASK) == KVM_REG_ARM_DEMUX) return demux_c15_set(vcpu, reg->id, uaddr); - err = set_invariant_sys_reg(reg->id, uaddr); - if (err != -ENOENT) - return err; - return kvm_sys_reg_set_user(vcpu, reg, sys_reg_descs, ARRAY_SIZE(sys_reg_descs)); } @@ -4849,23 +4870,14 @@ static int walk_sys_regs(struct kvm_vcpu *vcpu, u64 __user *uind) unsigned long kvm_arm_num_sys_reg_descs(struct kvm_vcpu *vcpu) { - return ARRAY_SIZE(invariant_sys_regs) - + num_demux_regs() + return num_demux_regs() + walk_sys_regs(vcpu, (u64 __user *)NULL); } int kvm_arm_copy_sys_reg_indices(struct kvm_vcpu *vcpu, u64 __user *uindices) { - unsigned int i; int err; - /* Then give them all the invariant registers' indices. */ - for (i = 0; i < ARRAY_SIZE(invariant_sys_regs); i++) { - if (put_user(sys_reg_to_index(&invariant_sys_regs[i]), uindices)) - return -EFAULT; - uindices++; - } - err = walk_sys_regs(vcpu, uindices); if (err < 0) return err; @@ -5091,15 +5103,12 @@ int __init kvm_sys_reg_table_init(void) valid &= check_sysreg_table(cp14_64_regs, ARRAY_SIZE(cp14_64_regs), true); valid &= check_sysreg_table(cp15_regs, ARRAY_SIZE(cp15_regs), true); valid &= check_sysreg_table(cp15_64_regs, ARRAY_SIZE(cp15_64_regs), true); - valid &= check_sysreg_table(invariant_sys_regs, ARRAY_SIZE(invariant_sys_regs), false); valid &= check_sysreg_table(sys_insn_descs, ARRAY_SIZE(sys_insn_descs), false); if (!valid) return -EINVAL; - /* We abuse the reset function to overwrite the table itself. */ - for (i = 0; i < ARRAY_SIZE(invariant_sys_regs); i++) - invariant_sys_regs[i].reset(NULL, &invariant_sys_regs[i]); + init_imp_id_regs(); ret = populate_nv_trap_config(); -- 2.39.5

6 months, 1 week

2
1
0 0

[PATCH v4 3/6] misc: pci_endpoint_test: Fix displaying irq_type after request_irq error

by Kunihiko Hayashi

There are two variables that indicate the interrupt type to be used in the next test execution, global "irq_type" and test->irq_type. The former is referenced from pci_endpoint_test_get_irq() to preserve the current type for ioctl(PCITEST_GET_IRQTYPE). In pci_endpoint_test_request_irq(), since this global variable is referenced when an error occurs, the unintended error message is displayed. For example, the following message shows "MSI 3" even if the current irq type becomes "MSI-X". # pcitest -i 2 pci-endpoint-test 0000:01:00.0: Failed to request IRQ 30 for MSI 3 SET IRQ TYPE TO MSI-X: NOT OKAY Fix this issue by using test->irq_type instead of global "irq_type". Cc: stable(a)vger.kernel.org Fixes: b2ba9225e031 ("misc: pci_endpoint_test: Avoid using module parameter to determine irqtype") Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam(a)linaro.org> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko(a)socionext.com> --- drivers/misc/pci_endpoint_test.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c index 9e56d200d2f0..acf3d8dab131 100644 --- a/drivers/misc/pci_endpoint_test.c +++ b/drivers/misc/pci_endpoint_test.c @@ -242,7 +242,7 @@ static int pci_endpoint_test_request_irq(struct pci_endpoint_test *test) return 0; fail: - switch (irq_type) { + switch (test->irq_type) { case IRQ_TYPE_INTX: dev_err(dev, "Failed to request IRQ %d for Legacy\n", pci_irq_vector(pdev, i)); -- 2.25.1

6 months, 1 week

1
0
0 0

[PATCH v4 2/6] misc: pci_endpoint_test: Avoid issue of interrupts remaining after request_irq error

by Kunihiko Hayashi

After devm_request_irq() fails with error in pci_endpoint_test_request_irq(), pci_endpoint_test_free_irq_vectors() is called assuming that all IRQs have been released. However some requested IRQs remain unreleased, so there are still /proc/irq/* entries remaining and this results in WARN() with the following message: remove_proc_entry: removing non-empty directory 'irq/30', leaking at least 'pci-endpoint-test.0' WARNING: CPU: 0 PID: 202 at fs/proc/generic.c:719 remove_proc_entry +0x190/0x19c To solve this issue, set the number of remaining IRQs to test->num_irqs and release IRQs in advance by calling pci_endpoint_test_release_irq(). Cc: stable(a)vger.kernel.org Fixes: e03327122e2c ("pci_endpoint_test: Add 2 ioctl commands") Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam(a)linaro.org> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko(a)socionext.com> --- drivers/misc/pci_endpoint_test.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c index a3d2caa7a6bb..9e56d200d2f0 100644 --- a/drivers/misc/pci_endpoint_test.c +++ b/drivers/misc/pci_endpoint_test.c @@ -259,6 +259,9 @@ static int pci_endpoint_test_request_irq(struct pci_endpoint_test *test) break; } + test->num_irqs = i; + pci_endpoint_test_release_irq(test); + return ret; } -- 2.25.1

6 months, 1 week

1
0
0 0

[PATCH v2 3/3] usb: renesas_usbhs: Flush the notify_hotplug_work

by Claudiu

From: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> When performing continuous unbind/bind operations on the USB drivers available on the Renesas RZ/G2L SoC, a kernel crash with the message "Unable to handle kernel NULL pointer dereference at virtual address" may occur. This issue points to the usbhsc_notify_hotplug() function. Flush the delayed work to avoid its execution when driver resources are unavailable. Fixes: bc57381e6347 ("usb: renesas_usbhs: use delayed_work instead of work_struct") Cc: stable(a)vger.kernel.org Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> --- Changes in v2: - collected tags drivers/usb/renesas_usbhs/common.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c index 6c7857b66a21..4b35ef216125 100644 --- a/drivers/usb/renesas_usbhs/common.c +++ b/drivers/usb/renesas_usbhs/common.c @@ -781,6 +781,8 @@ static void usbhs_remove(struct platform_device *pdev) dev_dbg(&pdev->dev, "usb remove\n"); + flush_delayed_work(&priv->notify_hotplug_work); + /* power off */ if (!usbhs_get_dparam(priv, runtime_pwctrl)) usbhsc_power_ctrl(priv, 0); -- 2.43.0

6 months, 1 week

1
0
0 0

[PATCH v2 2/3] usb: renesas_usbhs: Use devm_usb_get_phy()

by Claudiu

From: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> The gpriv->transceiver is retrieved in probe() through usb_get_phy() but never released. Use devm_usb_get_phy() to handle this scenario. This issue was identified through code investigation. No issue was found without this change. Fixes: b5a2875605ca ("usb: renesas_usbhs: Allow an OTG PHY driver to provide VBUS") Cc: stable(a)vger.kernel.org Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> --- Changes in v2: - collected tags drivers/usb/renesas_usbhs/mod_gadget.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c index 105132ae87ac..e8e5723f5412 100644 --- a/drivers/usb/renesas_usbhs/mod_gadget.c +++ b/drivers/usb/renesas_usbhs/mod_gadget.c @@ -1094,7 +1094,7 @@ int usbhs_mod_gadget_probe(struct usbhs_priv *priv) goto usbhs_mod_gadget_probe_err_gpriv; } - gpriv->transceiver = usb_get_phy(USB_PHY_TYPE_UNDEFINED); + gpriv->transceiver = devm_usb_get_phy(dev, USB_PHY_TYPE_UNDEFINED); dev_info(dev, "%stransceiver found\n", !IS_ERR(gpriv->transceiver) ? "" : "no "); -- 2.43.0

6 months, 1 week

1
0
0 0

[PATCH v2 1/3] usb: renesas_usbhs: Call clk_put()

by Claudiu

From: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> Clocks acquired with of_clk_get() need to be freed with clk_put(). Call clk_put() on priv->clks[0] on error path. Fixes: 3df0e240caba ("usb: renesas_usbhs: Add multiple clocks management") Cc: stable(a)vger.kernel.org Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj(a)bp.renesas.com> --- Changes in v2: - collected tags drivers/usb/renesas_usbhs/common.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c index 935fc496fe94..6c7857b66a21 100644 --- a/drivers/usb/renesas_usbhs/common.c +++ b/drivers/usb/renesas_usbhs/common.c @@ -312,8 +312,10 @@ static int usbhsc_clk_get(struct device *dev, struct usbhs_priv *priv) priv->clks[1] = of_clk_get(dev_of_node(dev), 1); if (PTR_ERR(priv->clks[1]) == -ENOENT) priv->clks[1] = NULL; - else if (IS_ERR(priv->clks[1])) + else if (IS_ERR(priv->clks[1])) { + clk_put(priv->clks[0]); return PTR_ERR(priv->clks[1]); + } return 0; } -- 2.43.0

6 months, 1 week

1
0
0 0

[PATCH 1/1] usb: xhci: Enable the TRB overfetch quirk on VIA VL805

by Mathias Nyman

From: Michal Pecio <michal.pecio(a)gmail.com> Raspberry Pi is a major user of those chips and they discovered a bug - when the end of a transfer ring segment is reached, up to four TRBs can be prefetched from the next page even if the segment ends with link TRB and on page boundary (the chip claims to support standard 4KB pages). It also appears that if the prefetched TRBs belong to a different ring whose doorbell is later rung, they may be used without refreshing from system RAM and the endpoint will stay idle if their cycle bit is stale. Other users complain about IOMMU faults on x86 systems, unsurprisingly. Deal with it by using existing quirk which allocates a dummy page after each transfer ring segment. This was seen to resolve both problems. RPi came up with a more efficient solution, shortening each segment by four TRBs, but it complicated the driver and they ditched it for this quirk. Also rename the quirk and add VL805 device ID macro. Signed-off-by: Michal Pecio <michal.pecio(a)gmail.com> Link: https://github.com/raspberrypi/linux/issues/4685 Closes: https://bugzilla.kernel.org/show_bug.cgi?id=215906 CC: stable(a)vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman(a)linux.intel.com> --- drivers/usb/host/xhci-mem.c | 3 ++- drivers/usb/host/xhci-pci.c | 10 +++++++--- drivers/usb/host/xhci.h | 2 +- 3 files changed, 10 insertions(+), 5 deletions(-) diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 92703efda1f7..fdf0c1008225 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -2437,7 +2437,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) * and our use of dma addresses in the trb_address_map radix tree needs * TRB_SEGMENT_SIZE alignment, so we pick the greater alignment need. */ - if (xhci->quirks & XHCI_ZHAOXIN_TRB_FETCH) + if (xhci->quirks & XHCI_TRB_OVERFETCH) + /* Buggy HC prefetches beyond segment bounds - allocate dummy space at the end */ xhci->segment_pool = dma_pool_create("xHCI ring segments", dev, TRB_SEGMENT_SIZE * 2, TRB_SEGMENT_SIZE * 2, xhci->page_size * 2); else diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index ad0ff356f6fa..54460d11f7ee 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -38,6 +38,8 @@ #define PCI_DEVICE_ID_ETRON_EJ168 0x7023 #define PCI_DEVICE_ID_ETRON_EJ188 0x7052 +#define PCI_DEVICE_ID_VIA_VL805 0x3483 + #define PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI 0x8c31 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI 0x9c31 #define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_XHCI 0x9cb1 @@ -418,8 +420,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) pdev->device == 0x3432) xhci->quirks |= XHCI_BROKEN_STREAMS; - if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483) + if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == PCI_DEVICE_ID_VIA_VL805) { xhci->quirks |= XHCI_LPM_SUPPORT; + xhci->quirks |= XHCI_TRB_OVERFETCH; + } if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && pdev->device == PCI_DEVICE_ID_ASMEDIA_1042_XHCI) { @@ -467,11 +471,11 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) if (pdev->device == 0x9202) { xhci->quirks |= XHCI_RESET_ON_RESUME; - xhci->quirks |= XHCI_ZHAOXIN_TRB_FETCH; + xhci->quirks |= XHCI_TRB_OVERFETCH; } if (pdev->device == 0x9203) - xhci->quirks |= XHCI_ZHAOXIN_TRB_FETCH; + xhci->quirks |= XHCI_TRB_OVERFETCH; } if (pdev->vendor == PCI_VENDOR_ID_CDNS && diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 8c164340a2c3..779b01dee068 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1632,7 +1632,7 @@ struct xhci_hcd { #define XHCI_EP_CTX_BROKEN_DCS BIT_ULL(42) #define XHCI_SUSPEND_RESUME_CLKS BIT_ULL(43) #define XHCI_RESET_TO_DEFAULT BIT_ULL(44) -#define XHCI_ZHAOXIN_TRB_FETCH BIT_ULL(45) +#define XHCI_TRB_OVERFETCH BIT_ULL(45) #define XHCI_ZHAOXIN_HOST BIT_ULL(46) #define XHCI_WRITE_64_HI_LO BIT_ULL(47) #define XHCI_CDNS_SCTX_QUIRK BIT_ULL(48) -- 2.43.0

6 months, 1 week

1
0
0 0

Re: Please backport: netfilter: nft_counter: Use u64_stats_t for statistic.

by MOESSBAUER, Felix

On Fri, 2024-09-27 at 21:06 +0000, Clark Williams wrote: > On Fri, Sep 27, 2024 at 3:57 PM Sebastian Andrzej Siewior > <bigeasy(a)linutronix.de> wrote: > > > > Hi, > > > > please backport > > > > 4a1d3acd6ea86 ("netfilter: nft_counter: Use u64_stats_t for > > statistic.") > > > > https://git.kernel.org/torvalds/c/4a1d3acd6ea86 > > > > Sebastian > > > > Do you want backports to both v6.6-rt and v6.1-rt ? Hi, we need the fix in both v6.6-rt and v6.1-rt. In v5.15-rt we already have it, in v5.10.234-rt127 we will have it once released. Best regards, Felix > -- Siemens AG Linux Expert Center Friedrich-Ludwig-Bauer-Str. 3 85748 Garching, Germany

6 months, 1 week

1
0
0 0

[PATCH 5.10/5.15 0/2] smb: client: fix UAF in async decryption

by Anastasia Belova

Commit b0abcd65ec54 ("smb: client: fix UAF in async decryption") fixes CVE-2024-50047 but brings NULL-pointer dereferebce. So commit 4bdec0d1f658 ("smb: client: fix NULL ptr deref in crypto_aead_setkey()") should be backported too.

6 months, 1 week

1
2
0 0

[PATCH net-next v3 1/4] stmmac: loongson: Pass correct arg to PCI function

by Philipp Stanner

pcim_iomap_regions() should receive the driver's name as its third parameter, not the PCI device's name. Define the driver name with a macro and use it at the appropriate places, including pcim_iomap_regions(). Cc: stable(a)vger.kernel.org # v5.14+ Fixes: 30bba69d7db4 ("stmmac: pci: Add dwmac support for Loongson") Signed-off-by: Philipp Stanner <phasta(a)kernel.org> --- drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c index bfe6e2d631bd..73a6715a93e6 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c @@ -11,6 +11,8 @@ #include "dwmac_dma.h" #include "dwmac1000.h" +#define DRIVER_NAME "dwmac-loongson-pci" + /* Normal Loongson Tx Summary */ #define DMA_INTR_ENA_NIE_TX_LOONGSON 0x00040000 /* Normal Loongson Rx Summary */ @@ -555,7 +557,7 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id for (i = 0; i < PCI_STD_NUM_BARS; i++) { if (pci_resource_len(pdev, i) == 0) continue; - ret = pcim_iomap_regions(pdev, BIT(0), pci_name(pdev)); + ret = pcim_iomap_regions(pdev, BIT(0), DRIVER_NAME); if (ret) goto err_disable_device; break; @@ -673,7 +675,7 @@ static const struct pci_device_id loongson_dwmac_id_table[] = { MODULE_DEVICE_TABLE(pci, loongson_dwmac_id_table); static struct pci_driver loongson_dwmac_driver = { - .name = "dwmac-loongson-pci", + .name = DRIVER_NAME, .id_table = loongson_dwmac_id_table, .probe = loongson_dwmac_probe, .remove = loongson_dwmac_remove, -- 2.48.1

6 months, 1 week

3
2
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror February 2025