August 2025 - Linux-stable-mirror

[PATCH v2 2/3] fuse: prevent overflow in copy_file_range return value

by Miklos Szeredi

The FUSE protocol uses struct fuse_write_out to convey the return value of copy_file_range, which is restricted to uint32_t. But the COPY_FILE_RANGE interface supports a 64-bit size copies. Currently the number of bytes copied is silently truncated to 32-bit, which may result in poor performance or even failure to copy in case of truncation to zero. Reported-by: Florian Weimer <fweimer(a)redhat.com> Closes: https://lore.kernel.org/all/lhuh5ynl8z5.fsf@oldenburg.str.redhat.com/ Fixes: 88bc7d5097a1 ("fuse: add support for copy_file_range()") Cc: <stable(a)vger.kernel.org> # v4.20 Signed-off-by: Miklos Szeredi <mszeredi(a)redhat.com> --- fs/fuse/file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/fuse/file.c b/fs/fuse/file.c index 45207a6bb85f..4adcf09d4b01 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -2960,7 +2960,7 @@ static ssize_t __fuse_copy_file_range(struct file *file_in, loff_t pos_in, .nodeid_out = ff_out->nodeid, .fh_out = ff_out->fh, .off_out = pos_out, - .len = len, + .len = min_t(size_t, len, UINT_MAX & PAGE_MASK), .flags = flags }; struct fuse_write_out outarg; -- 2.49.0

3 months, 2 weeks

1
0
0 0

[PATCH v2 1/3] fuse: check if copy_file_range() returns larger than requested size

by Miklos Szeredi

Just like write(), copy_file_range() should check if the return value is less or equal to the requested number of bytes. Reported-by: Chunsheng Luo <luochunsheng(a)ustc.edu> Closes: https://lore.kernel.org/all/20250807062425.694-1-luochunsheng@ustc.edu/ Fixes: 88bc7d5097a1 ("fuse: add support for copy_file_range()") Cc: <stable(a)vger.kernel.org> # v4.20 Signed-off-by: Miklos Szeredi <mszeredi(a)redhat.com> --- fs/fuse/file.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/fuse/file.c b/fs/fuse/file.c index 5525a4520b0f..45207a6bb85f 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -3026,6 +3026,9 @@ static ssize_t __fuse_copy_file_range(struct file *file_in, loff_t pos_in, fc->no_copy_file_range = 1; err = -EOPNOTSUPP; } + if (!err && outarg.size > len) + err = -EIO; + if (err) goto out; -- 2.49.0

3 months, 2 weeks

1
0
0 0

[PATCH 3/3] usb: storage: realtek_cr: Use correct byte order for bcs->Residue

by Thorsten Blum

Since 'bcs->Residue' has the data type '__le32', we must convert it to the correct byte order of the CPU using this driver when assigning it to the local variable 'residue'. Cc: stable(a)vger.kernel.org Fixes: 50a6cb932d5c ("USB: usb_storage: add ums-realtek driver") Suggested-by: Alan Stern <stern(a)rowland.harvard.edu> Signed-off-by: Thorsten Blum <thorsten.blum(a)linux.dev> --- drivers/usb/storage/realtek_cr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c index 8a4d7c0f2662..758258a569a6 100644 --- a/drivers/usb/storage/realtek_cr.c +++ b/drivers/usb/storage/realtek_cr.c @@ -253,7 +253,7 @@ static int rts51x_bulk_transport(struct us_data *us, u8 lun, return USB_STOR_TRANSPORT_ERROR; } - residue = bcs->Residue; + residue = le32_to_cpu(bcs->Residue); if (bcs->Tag != us->tag) return USB_STOR_TRANSPORT_ERROR; -- 2.50.1

3 months, 2 weeks

3
3
0 0

[PATCH] usb: storage: realtek_cr: Use correct byte order for bcs->Residue

by Thorsten Blum

Since 'bcs->Residue' has the data type '__le32', convert it to the correct byte order of the CPU using this driver when assigning it to the local variable 'residue'. Cc: stable(a)vger.kernel.org Fixes: 50a6cb932d5c ("USB: usb_storage: add ums-realtek driver") Suggested-by: Alan Stern <stern(a)rowland.harvard.edu> Acked-by: Alan Stern <stern(a)rowland.harvard.edu> Signed-off-by: Thorsten Blum <thorsten.blum(a)linux.dev> --- Resending this as a separate patch for backporting as requested by Greg. Link to previous patch: https://lore.kernel.org/lkml/20250813101249.158270-6-thorsten.blum@linux.de… --- drivers/usb/storage/realtek_cr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c index 8a4d7c0f2662..758258a569a6 100644 --- a/drivers/usb/storage/realtek_cr.c +++ b/drivers/usb/storage/realtek_cr.c @@ -253,7 +253,7 @@ static int rts51x_bulk_transport(struct us_data *us, u8 lun, return USB_STOR_TRANSPORT_ERROR; } - residue = bcs->Residue; + residue = le32_to_cpu(bcs->Residue); if (bcs->Tag != us->tag) return USB_STOR_TRANSPORT_ERROR; -- 2.50.1

3 months, 2 weeks

1
0
0 0

[PATCH 03/15] drm/xe/vm: Clear the scratch_pt pointer on error

by Thomas Hellström

Avoid triggering a dereference of an error pointer on cleanup in xe_vm_free_scratch() by clearing any scratch_pt error pointer. Signed-off-by: Thomas Hellström <thomas.hellstrom(a)linux.intel.com> Fixes: 06951c2ee72d ("drm/xe: Use NULL PTEs as scratch PTEs") Cc: Brian Welty <brian.welty(a)intel.com> Cc: Rodrigo Vivi <rodrigo.vivi(a)intel.com> Cc: Lucas De Marchi <lucas.demarchi(a)intel.com> Cc: <stable(a)vger.kernel.org> # v6.8+ --- drivers/gpu/drm/xe/xe_vm.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/xe/xe_vm.c b/drivers/gpu/drm/xe/xe_vm.c index d40d2d43c041..12e661960244 100644 --- a/drivers/gpu/drm/xe/xe_vm.c +++ b/drivers/gpu/drm/xe/xe_vm.c @@ -1635,8 +1635,12 @@ static int xe_vm_create_scratch(struct xe_device *xe, struct xe_tile *tile, for (i = MAX_HUGEPTE_LEVEL; i < vm->pt_root[id]->level; i++) { vm->scratch_pt[id][i] = xe_pt_create(vm, tile, i); - if (IS_ERR(vm->scratch_pt[id][i])) - return PTR_ERR(vm->scratch_pt[id][i]); + if (IS_ERR(vm->scratch_pt[id][i])) { + int err = PTR_ERR(vm->scratch_pt[id][i]); + + vm->scratch_pt[id][i] = NULL; + return err; + } xe_pt_populate_empty(tile, vm, vm->scratch_pt[id][i]); } -- 2.50.1

3 months, 2 weeks

2
1
0 0

FAILED: patch "[PATCH] ALSA: scarlett2: Add retry on -EPROTO from scarlett2_usb_tx()" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y git checkout FETCH_HEAD git cherry-pick -x 8a15ca0ca51399b652b1bbb23b590b220cf03d62 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025081244-chokehold-itunes-2e5a@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 8a15ca0ca51399b652b1bbb23b590b220cf03d62 Mon Sep 17 00:00:00 2001 From: "Geoffrey D. Bennett" <g(a)b4.vu> Date: Mon, 28 Jul 2025 19:00:35 +0930 Subject: [PATCH] ALSA: scarlett2: Add retry on -EPROTO from scarlett2_usb_tx() During communication with Focusrite Scarlett Gen 2/3/4 USB audio interfaces, -EPROTO is sometimes returned from scarlett2_usb_tx(), snd_usb_ctl_msg() which can cause initialisation and control operations to fail intermittently. This patch adds up to 5 retries in scarlett2_usb(), with a delay starting at 5ms and doubling each time. This follows the same approach as the fix for usb_set_interface() in endpoint.c (commit f406005e162b ("ALSA: usb-audio: Add retry on -EPROTO from usb_set_interface()")), which resolved similar -EPROTO issues during device initialisation, and is the same approach as in fcp.c:fcp_usb(). Fixes: 9e4d5c1be21f ("ALSA: usb-audio: Scarlett Gen 2 mixer interface") Closes: https://github.com/geoffreybennett/linux-fcp/issues/41 Cc: stable(a)vger.kernel.org Signed-off-by: Geoffrey D. Bennett <g(a)b4.vu> Link: https://patch.msgid.link/aIdDO6ld50WQwNim@m.b4.vu Signed-off-by: Takashi Iwai <tiwai(a)suse.de> diff --git a/sound/usb/mixer_scarlett2.c b/sound/usb/mixer_scarlett2.c index 49eeb1444dce..15bbdafc4894 100644 --- a/sound/usb/mixer_scarlett2.c +++ b/sound/usb/mixer_scarlett2.c @@ -2351,6 +2351,8 @@ static int scarlett2_usb( struct scarlett2_usb_packet *req, *resp = NULL; size_t req_buf_size = struct_size(req, data, req_size); size_t resp_buf_size = struct_size(resp, data, resp_size); + int retries = 0; + const int max_retries = 5; int err; req = kmalloc(req_buf_size, GFP_KERNEL); @@ -2374,10 +2376,15 @@ static int scarlett2_usb( if (req_size) memcpy(req->data, req_data, req_size); +retry: err = scarlett2_usb_tx(dev, private->bInterfaceNumber, req, req_buf_size); if (err != req_buf_size) { + if (err == -EPROTO && ++retries <= max_retries) { + msleep(5 * (1 << (retries - 1))); + goto retry; + } usb_audio_err( mixer->chip, "%s USB request result cmd %x was %d\n",

3 months, 2 weeks

2
1
0 0

FAILED: patch "[PATCH] ALSA: scarlett2: Add retry on -EPROTO from scarlett2_usb_tx()" failed to apply to 5.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x 8a15ca0ca51399b652b1bbb23b590b220cf03d62 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025081243-disaster-wrinkly-bdc6@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 8a15ca0ca51399b652b1bbb23b590b220cf03d62 Mon Sep 17 00:00:00 2001 From: "Geoffrey D. Bennett" <g(a)b4.vu> Date: Mon, 28 Jul 2025 19:00:35 +0930 Subject: [PATCH] ALSA: scarlett2: Add retry on -EPROTO from scarlett2_usb_tx() During communication with Focusrite Scarlett Gen 2/3/4 USB audio interfaces, -EPROTO is sometimes returned from scarlett2_usb_tx(), snd_usb_ctl_msg() which can cause initialisation and control operations to fail intermittently. This patch adds up to 5 retries in scarlett2_usb(), with a delay starting at 5ms and doubling each time. This follows the same approach as the fix for usb_set_interface() in endpoint.c (commit f406005e162b ("ALSA: usb-audio: Add retry on -EPROTO from usb_set_interface()")), which resolved similar -EPROTO issues during device initialisation, and is the same approach as in fcp.c:fcp_usb(). Fixes: 9e4d5c1be21f ("ALSA: usb-audio: Scarlett Gen 2 mixer interface") Closes: https://github.com/geoffreybennett/linux-fcp/issues/41 Cc: stable(a)vger.kernel.org Signed-off-by: Geoffrey D. Bennett <g(a)b4.vu> Link: https://patch.msgid.link/aIdDO6ld50WQwNim@m.b4.vu Signed-off-by: Takashi Iwai <tiwai(a)suse.de> diff --git a/sound/usb/mixer_scarlett2.c b/sound/usb/mixer_scarlett2.c index 49eeb1444dce..15bbdafc4894 100644 --- a/sound/usb/mixer_scarlett2.c +++ b/sound/usb/mixer_scarlett2.c @@ -2351,6 +2351,8 @@ static int scarlett2_usb( struct scarlett2_usb_packet *req, *resp = NULL; size_t req_buf_size = struct_size(req, data, req_size); size_t resp_buf_size = struct_size(resp, data, resp_size); + int retries = 0; + const int max_retries = 5; int err; req = kmalloc(req_buf_size, GFP_KERNEL); @@ -2374,10 +2376,15 @@ static int scarlett2_usb( if (req_size) memcpy(req->data, req_data, req_size); +retry: err = scarlett2_usb_tx(dev, private->bInterfaceNumber, req, req_buf_size); if (err != req_buf_size) { + if (err == -EPROTO && ++retries <= max_retries) { + msleep(5 * (1 << (retries - 1))); + goto retry; + } usb_audio_err( mixer->chip, "%s USB request result cmd %x was %d\n",

3 months, 2 weeks

2
1
0 0

FAILED: patch "[PATCH] net: usbnet: Avoid potential RCU stall on LINK_CHANGE event" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x 0d9cfc9b8cb17dbc29a98792d36ec39a1cf1395f # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025081258-value-bobbing-e1b7@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 0d9cfc9b8cb17dbc29a98792d36ec39a1cf1395f Mon Sep 17 00:00:00 2001 From: John Ernberg <john.ernberg(a)actia.se> Date: Wed, 23 Jul 2025 10:25:35 +0000 Subject: [PATCH] net: usbnet: Avoid potential RCU stall on LINK_CHANGE event The Gemalto Cinterion PLS83-W modem (cdc_ether) is emitting confusing link up and down events when the WWAN interface is activated on the modem-side. Interrupt URBs will in consecutive polls grab: * Link Connected * Link Disconnected * Link Connected Where the last Connected is then a stable link state. When the system is under load this may cause the unlink_urbs() work in __handle_link_change() to not complete before the next usbnet_link_change() call turns the carrier on again, allowing rx_submit() to queue new SKBs. In that event the URB queue is filled faster than it can drain, ending up in a RCU stall: rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 0-.... } 33108 jiffies s: 201 root: 0x1/. rcu: blocking rcu_node structures (internal RCU debug): Sending NMI from CPU 1 to CPUs 0: NMI backtrace for cpu 0 Call trace: arch_local_irq_enable+0x4/0x8 local_bh_enable+0x18/0x20 __netdev_alloc_skb+0x18c/0x1cc rx_submit+0x68/0x1f8 [usbnet] rx_alloc_submit+0x4c/0x74 [usbnet] usbnet_bh+0x1d8/0x218 [usbnet] usbnet_bh_tasklet+0x10/0x18 [usbnet] tasklet_action_common+0xa8/0x110 tasklet_action+0x2c/0x34 handle_softirqs+0x2cc/0x3a0 __do_softirq+0x10/0x18 ____do_softirq+0xc/0x14 call_on_irq_stack+0x24/0x34 do_softirq_own_stack+0x18/0x20 __irq_exit_rcu+0xa8/0xb8 irq_exit_rcu+0xc/0x30 el1_interrupt+0x34/0x48 el1h_64_irq_handler+0x14/0x1c el1h_64_irq+0x68/0x6c _raw_spin_unlock_irqrestore+0x38/0x48 xhci_urb_dequeue+0x1ac/0x45c [xhci_hcd] unlink1+0xd4/0xdc [usbcore] usb_hcd_unlink_urb+0x70/0xb0 [usbcore] usb_unlink_urb+0x24/0x44 [usbcore] unlink_urbs.constprop.0.isra.0+0x64/0xa8 [usbnet] __handle_link_change+0x34/0x70 [usbnet] usbnet_deferred_kevent+0x1c0/0x320 [usbnet] process_scheduled_works+0x2d0/0x48c worker_thread+0x150/0x1dc kthread+0xd8/0xe8 ret_from_fork+0x10/0x20 Get around the problem by delaying the carrier on to the scheduled work. This needs a new flag to keep track of the necessary action. The carrier ok check cannot be removed as it remains required for the LINK_RESET event flow. Fixes: 4b49f58fff00 ("usbnet: handle link change") Cc: stable(a)vger.kernel.org Signed-off-by: John Ernberg <john.ernberg(a)actia.se> Link: https://patch.msgid.link/20250723102526.1305339-1-john.ernberg@actia.se Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index c04e715a4c2a..bc1d8631ffe0 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -1122,6 +1122,9 @@ static void __handle_link_change(struct usbnet *dev) * tx queue is stopped by netcore after link becomes off */ } else { + if (test_and_clear_bit(EVENT_LINK_CARRIER_ON, &dev->flags)) + netif_carrier_on(dev->net); + /* submitting URBs for reading packets */ tasklet_schedule(&dev->bh); } @@ -2009,10 +2012,12 @@ EXPORT_SYMBOL(usbnet_manage_power); void usbnet_link_change(struct usbnet *dev, bool link, bool need_reset) { /* update link after link is reseted */ - if (link && !need_reset) - netif_carrier_on(dev->net); - else + if (link && !need_reset) { + set_bit(EVENT_LINK_CARRIER_ON, &dev->flags); + } else { + clear_bit(EVENT_LINK_CARRIER_ON, &dev->flags); netif_carrier_off(dev->net); + } if (need_reset && link) usbnet_defer_kevent(dev, EVENT_LINK_RESET); diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h index 0b9f1e598e3a..4bc6bb01a0eb 100644 --- a/include/linux/usb/usbnet.h +++ b/include/linux/usb/usbnet.h @@ -76,6 +76,7 @@ struct usbnet { # define EVENT_LINK_CHANGE 11 # define EVENT_SET_RX_MODE 12 # define EVENT_NO_IP_ALIGN 13 +# define EVENT_LINK_CARRIER_ON 14 /* This one is special, as it indicates that the device is going away * there are cyclic dependencies between tasklet, timer and bh * that must be broken

3 months, 2 weeks

2
1
0 0

FAILED: patch "[PATCH] smb: server: Fix extension string in" failed to apply to 5.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x 8e7d178d06e8937454b6d2f2811fa6a15656a214 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025081211-chirping-aversion-8b66@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 8e7d178d06e8937454b6d2f2811fa6a15656a214 Mon Sep 17 00:00:00 2001 From: Thorsten Blum <thorsten.blum(a)linux.dev> Date: Wed, 6 Aug 2025 03:03:49 +0200 Subject: [PATCH] smb: server: Fix extension string in ksmbd_extract_shortname() In ksmbd_extract_shortname(), strscpy() is incorrectly called with the length of the source string (excluding the NUL terminator) rather than the size of the destination buffer. This results in "__" being copied to 'extension' rather than "___" (two underscores instead of three). Use the destination buffer size instead to ensure that the string "___" (three underscores) is copied correctly. Cc: stable(a)vger.kernel.org Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3") Signed-off-by: Thorsten Blum <thorsten.blum(a)linux.dev> Acked-by: Namjae Jeon <linkinjeon(a)kernel.org> Signed-off-by: Steve French <stfrench(a)microsoft.com> diff --git a/fs/smb/server/smb_common.c b/fs/smb/server/smb_common.c index 425c756bcfb8..b23203a1c286 100644 --- a/fs/smb/server/smb_common.c +++ b/fs/smb/server/smb_common.c @@ -515,7 +515,7 @@ int ksmbd_extract_shortname(struct ksmbd_conn *conn, const char *longname, p = strrchr(longname, '.'); if (p == longname) { /*name starts with a dot*/ - strscpy(extension, "___", strlen("___")); + strscpy(extension, "___", sizeof(extension)); } else { if (p) { p++;

3 months, 2 weeks

2
1
0 0

Re: Patch "pwm: rockchip: Round period/duty down on apply, up on get" has been added to the 6.16-stable tree

by Uwe Kleine-König

Hello Sasha, On Fri, Aug 08, 2025 at 06:30:33PM -0400, Sasha Levin wrote: > This is a note to let you know that I've just added the patch titled > > pwm: rockchip: Round period/duty down on apply, up on get > > to the 6.16-stable tree which can be found at: > http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… > > The filename of the patch is: > pwm-rockchip-round-period-duty-down-on-apply-up-on-g.patch > and it can be found in the queue-6.16 subdirectory. > > If you, or anyone else, feels it should not be added to the stable tree, > please let <stable(a)vger.kernel.org> know about it. > > > > commit 51144efa3159cd95ab37e786c982822a060d7d1a > Author: Nicolas Frattaroli <nicolas.frattaroli(a)collabora.com> > Date: Mon Jun 16 17:14:17 2025 +0200 > > pwm: rockchip: Round period/duty down on apply, up on get > > [ Upstream commit 0b4d1abe5ca568c5b7f667345ec2b5ad0fb2e54b ] > > With CONFIG_PWM_DEBUG=y, the rockchip PWM driver produces warnings like > this: > > rockchip-pwm fd8b0010.pwm: .apply is supposed to round down > duty_cycle (requested: 23529/50000, applied: 23542/50000) > > This is because the driver chooses ROUND_CLOSEST for purported > idempotency reasons. However, it's possible to keep idempotency while > always rounding down in .apply(). > > Do this by making .get_state() always round up, and making .apply() > always round down. This is done with u64 maths, and setting both period > and duty to U32_MAX (the biggest the hardware can support) if they would > exceed their 32 bits confines. > > Fixes: 12f9ce4a5198 ("pwm: rockchip: Fix period and duty cycle approximation") > Fixes: 1ebb74cf3537 ("pwm: rockchip: Add support for hardware readout") > Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli(a)collabora.com> > Link: https://lore.kernel.org/r/20250616-rockchip-pwm-rounding-fix-v2-1-a9c65acad… > Signed-off-by: Uwe Kleine-König <ukleinek(a)kernel.org> > Signed-off-by: Sasha Levin <sashal(a)kernel.org> while the new code makes the driver match the PWM rules now, I'd be conservative and not backport that patch because while I consider it a (very minor) fix that's a change in behaviour and maybe people depend on that old behaviour. So let's not break our user's workflows and reserve that for a major release. Please drop this patch from your queue. Best regards Uwe

3 months, 2 weeks

3
5
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror August 2025