August 2025 - Linux-stable-mirror

[PATCH v2] clocksource: clps711x: Fix resource leaks in error paths

by Zhen Ni

The current implementation of clps711x_timer_init() has multiple error paths that directly return without releasing the base I/O memory mapped via of_iomap(). Fix of_iomap leaks in err paths. Fixes: 04410efbb6bc ("clocksource/drivers/clps711x: Convert init function to return error") Fixes: 2a6a8e2d9004 ("clocksource/drivers/clps711x: Remove board support") Cc: stable(a)vger.kernel.org Signed-off-by: Zhen Ni <zhen.ni(a)easystack.cn> --- changes in v2: - Add tags of 'Fixes' and 'Cc' - Reduce detailed enumeration of err paths - Omit a pointer check before iounmap() - Change goto target from out to unmap_io --- drivers/clocksource/clps711x-timer.c | 23 ++++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-) diff --git a/drivers/clocksource/clps711x-timer.c b/drivers/clocksource/clps711x-timer.c index e95fdc49c226..bbceb0289d45 100644 --- a/drivers/clocksource/clps711x-timer.c +++ b/drivers/clocksource/clps711x-timer.c @@ -78,24 +78,33 @@ static int __init clps711x_timer_init(struct device_node *np) unsigned int irq = irq_of_parse_and_map(np, 0); struct clk *clock = of_clk_get(np, 0); void __iomem *base = of_iomap(np, 0); + int ret = 0; if (!base) return -ENOMEM; - if (!irq) - return -EINVAL; - if (IS_ERR(clock)) - return PTR_ERR(clock); + if (!irq) { + ret = -EINVAL; + goto unmap_io; + } + if (IS_ERR(clock)) { + ret = PTR_ERR(clock); + goto unmap_io; + } switch (of_alias_get_id(np, "timer")) { case CLPS711X_CLKSRC_CLOCKSOURCE: clps711x_clksrc_init(clock, base); break; case CLPS711X_CLKSRC_CLOCKEVENT: - return _clps711x_clkevt_init(clock, base, irq); + ret = _clps711x_clkevt_init(clock, base, irq); + break; default: - return -EINVAL; + ret = -EINVAL; + break; } - return 0; +unmap_io: + iounmap(base); + return ret; } TIMER_OF_DECLARE(clps711x, "cirrus,ep7209-timer", clps711x_timer_init); -- 2.20.1

1 week, 2 days

2
1
0 0

[PATCH] mfd: intel_soc_pmic_chtdc_ti: Set use_single_read regmap_config flag

by Hans de Goede

Testing has shown that reading multiple registers at once (for 10 bit adc values) does not work. Set the use_single_read regmap_config flag to make regmap split these for is. This should fix temperature opregion accesses done by drivers/acpi/pmic/intel_pmic_chtdc_ti.c and is also necessary for the upcoming drivers for the ADC and battery MFD cells. Fixes: 6bac0606fdba ("mfd: Add support for Cherry Trail Dollar Cove TI PMIC") Cc: stable(a)vger.kernel.org Signed-off-by: Hans de Goede <hansg(a)kernel.org> --- drivers/mfd/intel_soc_pmic_chtdc_ti.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/mfd/intel_soc_pmic_chtdc_ti.c b/drivers/mfd/intel_soc_pmic_chtdc_ti.c index 4c1a68c9f575..a23bda8ddae8 100644 --- a/drivers/mfd/intel_soc_pmic_chtdc_ti.c +++ b/drivers/mfd/intel_soc_pmic_chtdc_ti.c @@ -82,6 +82,8 @@ static const struct regmap_config chtdc_ti_regmap_config = { .reg_bits = 8, .val_bits = 8, .max_register = 0xff, + /* Reading multiple registers at once is not supported */ + .use_single_read = true, }; static const struct regmap_irq chtdc_ti_irqs[] = { -- 2.49.0

1 week, 2 days

2
4
0 0

[PATCH v2 1/3] sched_ext: Mark scx_bpf_cpu_rq as NULL returnable

by Christian Loehle

scx_bpf_cpu_rq() obviously returns NULL on invalid cpu. Mark it as such. While kf_cpu_valid() will trigger scx_ops_error() that leads to the BPF scheduler exiting, this isn't guaranteed to be immediate, allowing for a dereference of a NULL scx_bpf_cpu_rq() return value. Cc: stable(a)vger.kernel.org Fixes: 6203ef73fa5c ("sched/ext: Add BPF function to fetch rq") Signed-off-by: Christian Loehle <christian.loehle(a)arm.com> Acked-by: Andrea Righi <arighi(a)nvidia.com> --- kernel/sched/ext.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/sched/ext.c b/kernel/sched/ext.c index 7dedc9a16281..3ea3f0f18030 100644 --- a/kernel/sched/ext.c +++ b/kernel/sched/ext.c @@ -7589,7 +7589,7 @@ BTF_ID_FLAGS(func, scx_bpf_get_online_cpumask, KF_ACQUIRE) BTF_ID_FLAGS(func, scx_bpf_put_cpumask, KF_RELEASE) BTF_ID_FLAGS(func, scx_bpf_task_running, KF_RCU) BTF_ID_FLAGS(func, scx_bpf_task_cpu, KF_RCU) -BTF_ID_FLAGS(func, scx_bpf_cpu_rq) +BTF_ID_FLAGS(func, scx_bpf_cpu_rq, KF_RET_NULL) #ifdef CONFIG_CGROUP_SCHED BTF_ID_FLAGS(func, scx_bpf_task_cgroup, KF_RCU | KF_ACQUIRE) #endif -- 2.34.1

1 week, 2 days

1
0
0 0

[PATCH AUTOSEL 6.15 01/80] usb: xhci: print xhci->xhc_state when queue_command failed

by Sasha Levin

From: Su Hui <suhui(a)nfschina.com> [ Upstream commit 7919407eca2ef562fa6c98c41cfdf6f6cdd69d92 ] When encounters some errors like these: xhci_hcd 0000:4a:00.2: xHCI dying or halted, can't queue_command xhci_hcd 0000:4a:00.2: FIXME: allocate a command ring segment usb usb5-port6: couldn't allocate usb_device It's hard to know whether xhc_state is dying or halted. So it's better to print xhc_state's value which can help locate the resaon of the bug. Signed-off-by: Su Hui <suhui(a)nfschina.com> Link: https://lore.kernel.org/r/20250725060117.1773770-1-suhui@nfschina.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- LLM Generated explanations, may be completely bogus: **Backport Status: YES** This commit is suitable for backporting to stable kernel trees for the following reasons: 1. **Enhanced Debugging for Real-World Issues**: The commit improves debugging of USB xHCI host controller failures by printing the actual `xhc_state` value when `queue_command` fails. The commit message shows real error messages users encounter ("xHCI dying or halted, can't queue_command"), demonstrating this is a real-world debugging problem. 2. **Minimal and Safe Change**: The change is extremely small and safe - it only modifies a debug print statement from: ```c xhci_dbg(xhci, "xHCI dying or halted, can't queue_command\n"); ``` to: ```c xhci_dbg(xhci, "xHCI dying or halted, can't queue_command. state: 0x%x\n", xhci->xhc_state); ``` 3. **No Functional Changes**: This is a pure diagnostic improvement. It doesn't change any logic, control flow, or data structures. It only adds the state value (0x%x format) to an existing debug message. 4. **Important for Troubleshooting**: The xHCI driver is critical for USB functionality, and when it fails with "dying or halted" states, knowing the exact state helps diagnose whether: - `XHCI_STATE_DYING` (0x1) - controller is dying - `XHCI_STATE_HALTED` (0x2) - controller is halted - Both states (0x3) - controller has both flags set This distinction is valuable for debugging hardware issues, driver bugs, or system problems. 5. **Zero Risk of Regression**: Adding a parameter to a debug print statement has no risk of introducing regressions. The worst case is the debug message prints the state value. 6. **Follows Stable Rules**: This meets stable kernel criteria as it: - Fixes a real debugging limitation - Is obviously correct - Has been tested (signed-off and accepted by Greg KH) - Is small (single line change) - Doesn't add new features, just improves existing diagnostics The commit helps system administrators and developers diagnose USB issues more effectively by providing the actual state value rather than just saying "dying or halted", making it a valuable debugging enhancement for stable kernels. drivers/usb/host/xhci-ring.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index b720e04ce7d8..8be033f1877d 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -4337,7 +4337,8 @@ static int queue_command(struct xhci_hcd *xhci, struct xhci_command *cmd, if ((xhci->xhc_state & XHCI_STATE_DYING) || (xhci->xhc_state & XHCI_STATE_HALTED)) { - xhci_dbg(xhci, "xHCI dying or halted, can't queue_command\n"); + xhci_dbg(xhci, "xHCI dying or halted, can't queue_command. state: 0x%x\n", + xhci->xhc_state); return -ESHUTDOWN; } -- 2.39.5

1 week, 2 days

3
81
0 0

[PATCH AUTOSEL 6.1 01/51] usb: xhci: print xhci->xhc_state when queue_command failed

by Sasha Levin

From: Su Hui <suhui(a)nfschina.com> [ Upstream commit 7919407eca2ef562fa6c98c41cfdf6f6cdd69d92 ] When encounters some errors like these: xhci_hcd 0000:4a:00.2: xHCI dying or halted, can't queue_command xhci_hcd 0000:4a:00.2: FIXME: allocate a command ring segment usb usb5-port6: couldn't allocate usb_device It's hard to know whether xhc_state is dying or halted. So it's better to print xhc_state's value which can help locate the resaon of the bug. Signed-off-by: Su Hui <suhui(a)nfschina.com> Link: https://lore.kernel.org/r/20250725060117.1773770-1-suhui@nfschina.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- LLM Generated explanations, may be completely bogus: **Backport Status: YES** This commit is suitable for backporting to stable kernel trees for the following reasons: 1. **Enhanced Debugging for Real-World Issues**: The commit improves debugging of USB xHCI host controller failures by printing the actual `xhc_state` value when `queue_command` fails. The commit message shows real error messages users encounter ("xHCI dying or halted, can't queue_command"), demonstrating this is a real-world debugging problem. 2. **Minimal and Safe Change**: The change is extremely small and safe - it only modifies a debug print statement from: ```c xhci_dbg(xhci, "xHCI dying or halted, can't queue_command\n"); ``` to: ```c xhci_dbg(xhci, "xHCI dying or halted, can't queue_command. state: 0x%x\n", xhci->xhc_state); ``` 3. **No Functional Changes**: This is a pure diagnostic improvement. It doesn't change any logic, control flow, or data structures. It only adds the state value (0x%x format) to an existing debug message. 4. **Important for Troubleshooting**: The xHCI driver is critical for USB functionality, and when it fails with "dying or halted" states, knowing the exact state helps diagnose whether: - `XHCI_STATE_DYING` (0x1) - controller is dying - `XHCI_STATE_HALTED` (0x2) - controller is halted - Both states (0x3) - controller has both flags set This distinction is valuable for debugging hardware issues, driver bugs, or system problems. 5. **Zero Risk of Regression**: Adding a parameter to a debug print statement has no risk of introducing regressions. The worst case is the debug message prints the state value. 6. **Follows Stable Rules**: This meets stable kernel criteria as it: - Fixes a real debugging limitation - Is obviously correct - Has been tested (signed-off and accepted by Greg KH) - Is small (single line change) - Doesn't add new features, just improves existing diagnostics The commit helps system administrators and developers diagnose USB issues more effectively by providing the actual state value rather than just saying "dying or halted", making it a valuable debugging enhancement for stable kernels. drivers/usb/host/xhci-ring.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 0862fdd3e568..c4880b22f359 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -4421,7 +4421,8 @@ static int queue_command(struct xhci_hcd *xhci, struct xhci_command *cmd, if ((xhci->xhc_state & XHCI_STATE_DYING) || (xhci->xhc_state & XHCI_STATE_HALTED)) { - xhci_dbg(xhci, "xHCI dying or halted, can't queue_command\n"); + xhci_dbg(xhci, "xHCI dying or halted, can't queue_command. state: 0x%x\n", + xhci->xhc_state); return -ESHUTDOWN; } -- 2.39.5

1 week, 2 days

3
52
0 0

Re: Jason recommend get in touch

by Seven

Hi, Glad to know you and your company from Jordan. I‘m Seven CTO of STHL We are a one-stop service provider for PCBA. We can help you with production from PCB to finished product assembly. Why Partner With Us? ✅ One-Stop Expertise: From PCB fabrication, PCBA (SMT & Through-Hole), custom cable harnesses, , to final product assembly – we eliminate multi-vendor coordination risks. ✅ Cost Efficiency: 40%+ clients reduce logistics/QC costs through our integrated service model (ISO 9001:2015 certified). ✅ Speed-to-Market: Average 15% faster lead times achieved via in-house vertical integration. Recent Success Case: Helped a German IoT startup scale from prototype to 50K-unit/month production within 6 months through our: PCB Design-for-Manufacturing (DFM) optimization Automated PCBA with 99.98% first-pass yield Mechanical housing CNC machining & IP67-rated assembly Seven Marcus CTO Shenzhen STHL Technology Co,Ltd +8618569002840 Seven(a)pcba-china.com 在2025-06-04，Seven <seven(a)ems-sthi.com> 写道:-----原始邮件----- 发件人： Seven <seven(a)ems-sthi.com> 发件时间: 2025年06月04日周三收件人： [Linux-stable-mirror <linux-stable-mirror(a)lists.linaro.org>] 主题： Re:Jordan recommend me get in touch Hi, Glad to know you and your company from Jordan. I‘m Seven CTO of STHL We are a one-stop service provider for PCBA. We can help you with production from PCB to finished product assembly. Why Partner With Us? ✅ One-Stop Expertise: From PCB fabrication, PCBA (SMT & Through-Hole), custom cable harnesses, , to final product assembly – we eliminate multi-vendor coordination risks. ✅ Cost Efficiency: 40%+ clients reduce logistics/QC costs through our integrated service model (ISO 9001:2015 certified). ✅ Speed-to-Market: Average 15% faster lead times achieved via in-house vertical integration. Recent Success Case: Helped a German IoT startup scale from prototype to 50K-unit/month production within 6 months through our: PCB Design-for-Manufacturing (DFM) optimization Automated PCBA with 99.98% first-pass yield Mechanical housing CNC machining & IP67-rated assembly Seven Marcus CTO Shenzhen STHL Technology Co,Ltd +8618569002840 Seven(a)pcba-china.com

1 week, 2 days

1
0
0 0

[PATCH 2/2] powerpc/powernv/pci: Fix underflow and leak issue

by Nam Cao

pnv_irq_domain_alloc() allocates interrupts at parent's interrupt domain. If it fails in the progress, all allocated interrupts are freed. The number of successfully allocated interrupts so far is stored "i". However, "i - 1" interrupts are freed. This is broken: - One interrupt is not be freed - If "i" is zero, "i - 1" wraps around Correct the number of freed interrupts to "i". Fixes: 0fcfe2247e75 ("powerpc/powernv/pci: Add MSI domains") Signed-off-by: Nam Cao <namcao(a)linutronix.de> Cc: stable(a)vger.kernel.org --- arch/powerpc/platforms/powernv/pci-ioda.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c index d8ccf2c9b98a..0166bf39ce1e 100644 --- a/arch/powerpc/platforms/powernv/pci-ioda.c +++ b/arch/powerpc/platforms/powernv/pci-ioda.c @@ -1854,7 +1854,7 @@ static int pnv_irq_domain_alloc(struct irq_domain *domain, unsigned int virq, return 0; out: - irq_domain_free_irqs_parent(domain, virq, i - 1); + irq_domain_free_irqs_parent(domain, virq, i); msi_bitmap_free_hwirqs(&phb->msi_bmp, hwirq, nr_irqs); return ret; } -- 2.39.5

1 week, 2 days

2
1
0 0

[PATCH 1/2] powerpc/pseries/msi: Fix potential underflow and leak issue

by Nam Cao

pseries_irq_domain_alloc() allocates interrupts at parent's interrupt domain. If it fails in the progress, all allocated interrupts are freed. The number of successfully allocated interrupts so far is stored "i". However, "i - 1" interrupts are freed. This is broken: - One interrupt is not be freed - If "i" is zero, "i - 1" wraps around Correct the number of freed interrupts to 'i'. Fixes: a5f3d2c17b07 ("powerpc/pseries/pci: Add MSI domains") Signed-off-by: Nam Cao <namcao(a)linutronix.de> Cc: stable(a)vger.kernel.org --- arch/powerpc/platforms/pseries/msi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/platforms/pseries/msi.c b/arch/powerpc/platforms/pseries/msi.c index ee1c8c6898a3..9dc294de631f 100644 --- a/arch/powerpc/platforms/pseries/msi.c +++ b/arch/powerpc/platforms/pseries/msi.c @@ -593,7 +593,7 @@ static int pseries_irq_domain_alloc(struct irq_domain *domain, unsigned int virq out: /* TODO: handle RTAS cleanup in ->msi_finish() ? */ - irq_domain_free_irqs_parent(domain, virq, i - 1); + irq_domain_free_irqs_parent(domain, virq, i); return ret; } -- 2.39.5

1 week, 2 days

2
1
0 0

[PATCH v4] Mark xe driver as BROKEN if kernel page size is not 4kB

by Simon Richter

This driver, for the time being, assumes that the kernel page size is 4kB, so it fails on loong64 and aarch64 with 16kB pages, and ppc64el with 64kB pages. Signed-off-by: Simon Richter <Simon.Richter(a)hogyros.de> Cc: stable(a)vger.kernel.org --- drivers/gpu/drm/xe/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/xe/Kconfig b/drivers/gpu/drm/xe/Kconfig index 2bb2bc052120..714d5702dfd7 100644 --- a/drivers/gpu/drm/xe/Kconfig +++ b/drivers/gpu/drm/xe/Kconfig @@ -5,6 +5,7 @@ config DRM_XE depends on KUNIT || !KUNIT depends on INTEL_VSEC || !INTEL_VSEC depends on X86_PLATFORM_DEVICES || !(X86 && ACPI) + depends on PAGE_SIZE_4KB || COMPILE_TEST || BROKEN select INTERVAL_TREE # we need shmfs for the swappable backing store, and in particular # the shmem_readpage() which depends upon tmpfs -- 2.47.2

1 week, 2 days

2
1
0 0

[PATCH] fs: correctly check for errors from replace_fd() in receive_fd_replace()

by Thomas Weißschuh

replace_fd() returns either a negative error number or the number of the new file descriptor. The current code misinterprets any positive file descriptor number as an error. Only check for negative error numbers, so that __receive_sock() is called correctly for valid file descriptors. Fixes: 173817151b15 ("fs: Expand __receive_fd() to accept existing fd") Fixes: 42eb0d54c08a ("fs: split receive_fd_replace from __receive_fd") Cc: stable(a)vger.kernel.org Signed-off-by: Thomas Weißschuh <thomas.weissschuh(a)linutronix.de> --- Untested, it stuck out while reading the code. --- fs/file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/file.c b/fs/file.c index 6d2275c3be9c6967d16c75d1b6521f9b58980926..56c3a045121d8f43a54cf05e6ce1962f896339ac 100644 --- a/fs/file.c +++ b/fs/file.c @@ -1387,7 +1387,7 @@ int receive_fd_replace(int new_fd, struct file *file, unsigned int o_flags) if (error) return error; error = replace_fd(new_fd, file, o_flags); - if (error) + if (error < 0) return error; __receive_sock(file); return new_fd; --- base-commit: 89748acdf226fd1a8775ff6fa2703f8412b286c8 change-id: 20250801-fix-receive_fd_replace-7fdd5ce6532d Best regards, -- Thomas Weißschuh <thomas.weissschuh(a)linutronix.de>

1 week, 2 days

4
3
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror August 2025