September 2025 - Linux-stable-mirror

[PATCH] drm/amd: Only restore cached manual clock settings in restore if OD enabled

by Mario Limonciello

If OD is not enabled then restoring cached clock settings doesn't make sense and actually leads to errors in resume. Check if enabled before restoring settings. Fixes: 796ff8a7e01bd ("drm/amd: Restore cached manual clock settings during resume") Cc: stable(a)vger.kernel.org Reported-by: Jérôme Lécuyer <jerome.4a4c(a)gmail.com> Closes: https://lore.kernel.org/amd-gfx/0ffe2692-7bfa-4821-856e-dd0f18e2c32b@amd.co… Suggested-by: Jérôme Lécuyer <jerome.4a4c(a)gmail.com> Signed-off-by: Mario Limonciello <mario.limonciello(a)amd.com> --- drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c b/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c index bf2b38dd7e25..fb8086859857 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c +++ b/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c @@ -2263,7 +2263,7 @@ static int smu_resume(struct amdgpu_ip_block *ip_block) return ret; } - if (smu_dpm_ctx->dpm_level == AMD_DPM_FORCED_LEVEL_MANUAL) { + if (smu_dpm_ctx->dpm_level == AMD_DPM_FORCED_LEVEL_MANUAL && smu->od_enabled) { ret = smu_od_edit_dpm_table(smu, PP_OD_COMMIT_DPM_TABLE, NULL, 0); if (ret) return ret; -- 2.49.0

5 days, 14 hours

2
1
0 0

[PATCH v1] ASoC: qcom: sc8280xp: Fix sound card driver name match data for QCS8275

by Mohammad Rafi Shaik

The QCS8275 board is based on Qualcomm's QCS8300 SoC family, and all supported firmware files are located in the qcs8300 directory. The sound topology and ALSA UCM configuration files have also been migrated from the qcs8275 directory to the actual SoC qcs8300 directory in linux-firmware. With the current setup, the sound topology fails to load, resulting in sound card registration failure. This patch updates the driver match data to use the correct driver name qcs8300 for the qcs8275-sndcard, ensuring that the sound card driver correctly loads the sound topology and ALSA UCM configuration files from the qcs8300 directory. Fixes: 34d340d48e595 ("ASoC: qcom: sc8280xp: Add support for QCS8275") Cc: stable(a)vger.kernel.org Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik(a)oss.qualcomm.com> --- sound/soc/qcom/sc8280xp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/qcom/sc8280xp.c b/sound/soc/qcom/sc8280xp.c index 73f9f82c4e25..db48168b7d3f 100644 --- a/sound/soc/qcom/sc8280xp.c +++ b/sound/soc/qcom/sc8280xp.c @@ -186,7 +186,7 @@ static int sc8280xp_platform_probe(struct platform_device *pdev) static const struct of_device_id snd_sc8280xp_dt_match[] = { {.compatible = "qcom,qcm6490-idp-sndcard", "qcm6490"}, {.compatible = "qcom,qcs6490-rb3gen2-sndcard", "qcs6490"}, - {.compatible = "qcom,qcs8275-sndcard", "qcs8275"}, + {.compatible = "qcom,qcs8275-sndcard", "qcs8300"}, {.compatible = "qcom,qcs9075-sndcard", "qcs9075"}, {.compatible = "qcom,qcs9100-sndcard", "qcs9100"}, {.compatible = "qcom,sc8280xp-sndcard", "sc8280xp"}, -- 2.34.1

5 days, 15 hours

4
3
0 0

[REGRESSION] 6.16 fae58d0155 prevents boot of google-tomato (mt8195)

by ninelore

Hi, starting with the bisected commit fae58d0155a979a8c414bbc12db09dd4b2f910d0 ("[v2] drm/mediatek: Fix device/node reference count leaks in mtk_drm_get_all_drm_priv") on 6.16.y my chromebook codenamed google-tomato with the SoC MT8195 seems to hang while initializing drm. Kernel messages over serial show CPU stalls some minutes later. I am attaching the full kernel logs below. This issue is present in 6.16.7, however not in v6.17-rc6 This is my first time reporting a bug here. Please let me know if you need additional information. Thanks and kind regards Ingo Reitz -------- Booting Linux on physical CPU 0x0000000000 [0x412fd050] Linux version 6.16.4 (nixbld@localhost) (aarch64-unknown-linux-gnu-gcc (GCC) 14.3.0, GNU ld (GNU Binutils) 2.44) #1-NixOS SMP Tue Jan 1 00:00:00 UTC 1980 Machine model: Acer Tomato (rev3 - 4) board Reserved memory: created DMA memory pool at 0x0000000050000000, size 41 MiB OF: reserved mem: initialized node memory@50000000, compatible id shared-dma-pool OF: reserved mem: 0x0000000050000000..0x00000000528fffff (41984 KiB) nomap non-reusable memory@50000000 Reserved memory: created DMA memory pool at 0x0000000060000000, size 13 MiB OF: reserved mem: initialized node memory@60000000, compatible id shared-dma-pool OF: reserved mem: 0x0000000060000000..0x0000000060d7ffff (13824 KiB) nomap non-reusable memory@60000000 Reserved memory: created DMA memory pool at 0x0000000060d80000, size 1 MiB OF: reserved mem: initialized node memory@60d80000, compatible id shared-dma-pool OF: reserved mem: 0x0000000060d80000..0x0000000060e7ffff (1024 KiB) nomap non-reusable memory@60d80000 Reserved memory: created DMA memory pool at 0x0000000060e80000, size 2 MiB OF: reserved mem: initialized node memory@60e80000, compatible id shared-dma-pool OF: reserved mem: 0x0000000060e80000..0x00000000610fffff (2560 KiB) nomap non-reusable memory@60e80000 Zone ranges: Normal [mem 0x0000000040000000-0x000000023fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000040000000-0x000000004fffffff] node 0: [mem 0x0000000050000000-0x00000000528fffff] node 0: [mem 0x0000000052900000-0x00000000545fffff] node 0: [mem 0x0000000054660000-0x000000005fffffff] node 0: [mem 0x0000000060000000-0x00000000610fffff] node 0: [mem 0x0000000061100000-0x00000000fffdafff] node 0: [mem 0x0000000100000000-0x000000023fffffff] Initmem setup node 0 [mem 0x0000000040000000-0x000000023fffffff] On node 0, zone Normal: 96 pages in unavailable ranges On node 0, zone Normal: 37 pages in unavailable ranges psci: probing for conduit method from DT. psci: PSCIv1.1 detected in firmware. psci: Using standard PSCI v0.2 function IDs psci: MIGRATE_INFO_TYPE not supported. psci: SMC Calling Convention v1.5 percpu: Embedded 17 pages/cpu s40608 r0 d29024 u69632 pcpu-alloc: s40608 r0 d29024 u69632 alloc=17*4096 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 Detected VIPT I-cache on CPU0 CPU features: detected: GIC system register CPU interface CPU features: detected: Virtualization Host Extensions CPU features: kernel page table isolation disabled by kernel configuration alternatives: applying boot alternatives Kernel command line: console=tty0 console=ttyS0,115200n8 loglevel=15 printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) software IO TLB: SWIOTLB bounce buffer size adjusted to 8MB software IO TLB: area num 8. software IO TLB: mapped [mem 0x0000000236a00000-0x0000000237200000] (8MB) Built 1 zonelists, mobility grouping on. Total pages: 2097019 mem auto-init: stack:all(zero), heap alloc:off, heap free:off SLUB: HWalign=64, Order=0-1, MinObjects=0, CPUs=8, Nodes=1 rcu: Hierarchical RCU implementation. rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 GICv3: GIC: Using split EOI/Deactivate mode GICv3: 864 SPIs implemented GICv3: 0 Extended SPIs implemented Root IRQ handler: 0xffff80008001007c GICv3: GICv3 features: 16 PPIs GICv3: GICD_CTRL.DS=0, SCR_EL3.FIQ=0 GICv3: CPU0: found redistributor 0 region 0:0x000000000c040000 GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@100[1] /cpus/cpu@200[2] /cpus/cpu@300[3] } GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@400[4] /cpus/cpu@500[5] /cpus/cpu@600[6] /cpus/cpu@700[7] } rcu: srcu_init: Setting srcu_struct sizes based on contention. arch_timer: cp15 timer(s) running at 13.00MHz (phys). clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2ff89eacb, max_idle_ns: 440795202429 ns sched_clock: 56 bits at 13MHz, resolution 76ns, wraps every 4398046511101ns Console: colour dummy device 80x25 printk: legacy console [tty0] enabled Calibrating delay loop (skipped), value calculated using timer frequency.. 26.00 BogoMIPS (lpj=52000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) rcu: Hierarchical SRCU implementation. rcu: Max phase no-delay instances is 1000. smp: Bringing up secondary CPUs ... Detected VIPT I-cache on CPU1 GICv3: CPU1: found redistributor 100 region 0:0x000000000c060000 CPU1: Booted secondary processor 0x0000000100 [0x412fd050] Detected VIPT I-cache on CPU2 GICv3: CPU2: found redistributor 200 region 0:0x000000000c080000 CPU2: Booted secondary processor 0x0000000200 [0x412fd050] Detected VIPT I-cache on CPU3 GICv3: CPU3: found redistributor 300 region 0:0x000000000c0a0000 CPU3: Booted secondary processor 0x0000000300 [0x412fd050] CPU features: detected: Spectre-v4 CPU features: detected: Spectre-BHB Detected PIPT I-cache on CPU4 GICv3: CPU4: found redistributor 400 region 0:0x000000000c0c0000 CPU4: Booted secondary processor 0x0000000400 [0x411fd410] Detected PIPT I-cache on CPU5 GICv3: CPU5: found redistributor 500 region 0:0x000000000c0e0000 CPU5: Booted secondary processor 0x0000000500 [0x411fd410] Detected PIPT I-cache on CPU6 GICv3: CPU6: found redistributor 600 region 0:0x000000000c100000 CPU6: Booted secondary processor 0x0000000600 [0x411fd410] Detected PIPT I-cache on CPU7 GICv3: CPU7: found redistributor 700 region 0:0x000000000c120000 CPU7: Booted secondary processor 0x0000000700 [0x411fd410] smp: Brought up 1 node, 8 CPUs SMP: Total of 8 processors activated. CPU: All CPU(s) started at EL2 CPU features: detected: 32-bit EL0 Support CPU features: detected: Data cache clean to the PoU not required for I/D coherence CPU features: detected: Common not Private translations CPU features: detected: CRC32 instructions CPU features: detected: Data cache clean to Point of Persistence CPU features: detected: RCpc load-acquire (LDAPR) CPU features: detected: LSE atomic instructions CPU features: detected: PMUv3 CPU features: detected: RAS Extension Support CPU features: detected: Speculative Store Bypassing Safe (SSBS) spectre-bhb mitigation disabled by compile time option spectre-bhb mitigation disabled by compile time option alternatives: applying system-wide alternatives CPU features: detected: Hardware dirty bit management on CPU0-7 Memory: 8159184K/8388076K available (4928K kernel code, 924K rwdata, 1800K rodata, 896K init, 479K bss, 224752K reserved, 0K cma-reserved) devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 2048 (131072 bytes on 1 NUMA nodes, total 128 KiB, linear). pinctrl core: initialized pinctrl subsystem DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations thermal_sys: Registered thermal governor 'step_wise' thermal_sys: Registered thermal governor 'power_allocator' hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. ASID allocator initialised with 65536 entries Serial: AMBA PL011 UART driver /soc/interrupt-controller@c000000: Fixed dependency cycle(s) with /soc/interrupt-controller@c000000 /soc/syscon@1c01a000: Fixed dependency cycle(s) with /soc/ovl@1c000000 /soc/ovl@1c000000: Fixed dependency cycle(s) with /soc/rdma@1c002000 /soc/ovl@1c000000: Fixed dependency cycle(s) with /soc/syscon@1c01a000 /soc/rdma@1c002000: Fixed dependency cycle(s) with /soc/color@1c003000 /soc/rdma@1c002000: Fixed dependency cycle(s) with /soc/ovl@1c000000 /soc/rdma@1c002000: Fixed dependency cycle(s) with /soc/syscon@1c01a000 /soc/color@1c003000: Fixed dependency cycle(s) with /soc/ccorr@1c004000 /soc/color@1c003000: Fixed dependency cycle(s) with /soc/rdma@1c002000 /soc/color@1c003000: Fixed dependency cycle(s) with /soc/syscon@1c01a000 /soc/ccorr@1c004000: Fixed dependency cycle(s) with /soc/aal@1c005000 /soc/ccorr@1c004000: Fixed dependency cycle(s) with /soc/color@1c003000 /soc/ccorr@1c004000: Fixed dependency cycle(s) with /soc/syscon@1c01a000 /soc/aal@1c005000: Fixed dependency cycle(s) with /soc/gamma@1c006000 /soc/aal@1c005000: Fixed dependency cycle(s) with /soc/ccorr@1c004000 /soc/aal@1c005000: Fixed dependency cycle(s) with /soc/syscon@1c01a000 /soc/gamma@1c006000: Fixed dependency cycle(s) with /soc/dither@1c007000 /soc/gamma@1c006000: Fixed dependency cycle(s) with /soc/aal@1c005000 /soc/gamma@1c006000: Fixed dependency cycle(s) with /soc/syscon@1c01a000 /soc/dither@1c007000: Fixed dependency cycle(s) with /soc/dsc@1c009000 /soc/dither@1c007000: Fixed dependency cycle(s) with /soc/gamma@1c006000 /soc/dither@1c007000: Fixed dependency cycle(s) with /soc/syscon@1c01a000 /soc/dsc@1c009000: Fixed dependency cycle(s) with /soc/merge@1c014000 /soc/dsc@1c009000: Fixed dependency cycle(s) with /soc/dither@1c007000 /soc/dsc@1c009000: Fixed dependency cycle(s) with /soc/syscon@1c01a000 /soc/merge@1c014000: Fixed dependency cycle(s) with /soc/dp-intf@1c015000 /soc/merge@1c014000: Fixed dependency cycle(s) with /soc/dsc@1c009000 /soc/merge@1c014000: Fixed dependency cycle(s) with /soc/syscon@1c01a000 /soc/dp-intf@1c015000: Fixed dependency cycle(s) with /soc/edp-tx@1c500000 /soc/dp-intf@1c015000: Fixed dependency cycle(s) with /soc/merge@1c014000 /soc/dp-intf@1c015000: Fixed dependency cycle(s) with /soc/syscon@1c01a000 /soc/syscon@1c100000: Fixed dependency cycle(s) with /soc/hdr-engine@1c114000 /soc/vpp-merge@1c110000: Fixed dependency cycle(s) with /soc/dp-intf@1c113000 /soc/vpp-merge@1c110000: Fixed dependency cycle(s) with /soc/hdr-engine@1c114000 /soc/vpp-merge@1c110000: Fixed dependency cycle(s) with /soc/syscon@1c100000 /soc/dp-intf@1c113000: Fixed dependency cycle(s) with /soc/dp-tx@1c600000 /soc/dp-intf@1c113000: Fixed dependency cycle(s) with /soc/vpp-merge@1c110000 /soc/dp-intf@1c113000: Fixed dependency cycle(s) with /soc/syscon@1c100000 /soc/hdr-engine@1c114000: Fixed dependency cycle(s) with /soc/vpp-merge@1c110000 /soc/hdr-engine@1c114000: Fixed dependency cycle(s) with /soc/syscon@1c100000 /soc/edp-tx@1c500000: Fixed dependency cycle(s) with /soc/edp-tx@1c500000/aux-bus/panel /soc/edp-tx@1c500000: Fixed dependency cycle(s) with /soc/dp-intf@1c015000 /soc/edp-tx@1c500000/aux-bus/panel: Fixed dependency cycle(s) with /soc/edp-tx@1c500000 /soc/dp-tx@1c600000: Fixed dependency cycle(s) with /soc/dp-intf@1c113000 /soc/pinctrl@10005000: Fixed dependency cycle(s) with /soc/pinctrl@10005000/pio-default-pins /soc/pcie@112f8000: Fixed dependency cycle(s) with /soc/pcie@112f8000/interrupt-controller /soc/syscon@1c01a000: Fixed dependency cycle(s) with /soc/ovl@1c000000 /soc/syscon@1c01a000: Fixed dependency cycle(s) with /soc/ovl@1c000000 /soc/ovl@1c000000: Fixed dependency cycle(s) with /soc/rdma@1c002000 /soc/ovl@1c000000: Fixed dependency cycle(s) with /soc/syscon@1c01a000 /soc/ovl@1c000000: Fixed dependency cycle(s) with /soc/rdma@1c002000 /soc/rdma@1c002000: Fixed dependency cycle(s) with /soc/color@1c003000 /soc/rdma@1c002000: Fixed dependency cycle(s) with /soc/ovl@1c000000 /soc/rdma@1c002000: Fixed dependency cycle(s) with /soc/syscon@1c01a000 /soc/rdma@1c002000: Fixed dependency cycle(s) with /soc/color@1c003000 /soc/color@1c003000: Fixed dependency cycle(s) with /soc/ccorr@1c004000 /soc/color@1c003000: Fixed dependency cycle(s) with /soc/rdma@1c002000 /soc/color@1c003000: Fixed dependency cycle(s) with /soc/syscon@1c01a000 /soc/color@1c003000: Fixed dependency cycle(s) with /soc/ccorr@1c004000 /soc/ccorr@1c004000: Fixed dependency cycle(s) with /soc/aal@1c005000 /soc/ccorr@1c004000: Fixed dependency cycle(s) with /soc/color@1c003000 /soc/ccorr@1c004000: Fixed dependency cycle(s) with /soc/syscon@1c01a000 /soc/ccorr@1c004000: Fixed dependency cycle(s) with /soc/aal@1c005000 /soc/aal@1c005000: Fixed dependency cycle(s) with /soc/gamma@1c006000 /soc/aal@1c005000: Fixed dependency cycle(s) with /soc/ccorr@1c004000 /soc/aal@1c005000: Fixed dependency cycle(s) with /soc/syscon@1c01a000 /soc/aal@1c005000: Fixed dependency cycle(s) with /soc/gamma@1c006000 /soc/gamma@1c006000: Fixed dependency cycle(s) with /soc/dither@1c007000 /soc/gamma@1c006000: Fixed dependency cycle(s) with /soc/aal@1c005000 /soc/gamma@1c006000: Fixed dependency cycle(s) with /soc/syscon@1c01a000 /soc/gamma@1c006000: Fixed dependency cycle(s) with /soc/dither@1c007000 /soc/dither@1c007000: Fixed dependency cycle(s) with /soc/dsc@1c009000 /soc/dither@1c007000: Fixed dependency cycle(s) with /soc/gamma@1c006000 /soc/dither@1c007000: Fixed dependency cycle(s) with /soc/syscon@1c01a000 /soc/dither@1c007000: Fixed dependency cycle(s) with /soc/dsc@1c009000 /soc/dsc@1c009000: Fixed dependency cycle(s) with /soc/merge@1c014000 /soc/dsc@1c009000: Fixed dependency cycle(s) with /soc/dither@1c007000 /soc/dsc@1c009000: Fixed dependency cycle(s) with /soc/syscon@1c01a000 /soc/dsc@1c009000: Fixed dependency cycle(s) with /soc/merge@1c014000 /soc/merge@1c014000: Fixed dependency cycle(s) with /soc/dp-intf@1c015000 /soc/merge@1c014000: Fixed dependency cycle(s) with /soc/dsc@1c009000 /soc/merge@1c014000: Fixed dependency cycle(s) with /soc/syscon@1c01a000 /soc/merge@1c014000: Fixed dependency cycle(s) with /soc/dp-intf@1c015000 /soc/dp-intf@1c015000: Fixed dependency cycle(s) with /soc/edp-tx@1c500000 /soc/dp-intf@1c015000: Fixed dependency cycle(s) with /soc/merge@1c014000 /soc/dp-intf@1c015000: Fixed dependency cycle(s) with /soc/syscon@1c01a000 /soc/syscon@1c100000: Fixed dependency cycle(s) with /soc/hdr-engine@1c114000 /soc/vpp-merge@1c110000: Fixed dependency cycle(s) with /soc/dp-intf@1c113000 /soc/vpp-merge@1c110000: Fixed dependency cycle(s) with /soc/hdr-engine@1c114000 /soc/vpp-merge@1c110000: Fixed dependency cycle(s) with /soc/syscon@1c100000 /soc/vpp-merge@1c110000: Fixed dependency cycle(s) with /soc/dp-intf@1c113000 /soc/dp-intf@1c113000: Fixed dependency cycle(s) with /soc/dp-tx@1c600000 /soc/dp-intf@1c113000: Fixed dependency cycle(s) with /soc/vpp-merge@1c110000 /soc/dp-intf@1c113000: Fixed dependency cycle(s) with /soc/syscon@1c100000 /soc/vpp-merge@1c110000: Fixed dependency cycle(s) with /soc/hdr-engine@1c114000 /soc/syscon@1c100000: Fixed dependency cycle(s) with /soc/hdr-engine@1c114000 /soc/hdr-engine@1c114000: Fixed dependency cycle(s) with /soc/vpp-merge@1c110000 /soc/hdr-engine@1c114000: Fixed dependency cycle(s) with /soc/syscon@1c100000 /soc/dp-intf@1c015000: Fixed dependency cycle(s) with /soc/edp-tx@1c500000 /soc/edp-tx@1c500000: Fixed dependency cycle(s) with /soc/edp-tx@1c500000/aux-bus/panel /soc/edp-tx@1c500000: Fixed dependency cycle(s) with /soc/dp-intf@1c015000 /soc/edp-tx@1c500000/aux-bus/panel: Fixed dependency cycle(s) with /soc/edp-tx@1c500000 /soc/dp-intf@1c113000: Fixed dependency cycle(s) with /soc/dp-tx@1c600000 /soc/dp-tx@1c600000: Fixed dependency cycle(s) with /soc/dp-intf@1c113000 HugeTLB: allocation took 0ms with hugepage_allocation_threads=2 HugeTLB: allocation took 0ms with hugepage_allocation_threads=2 HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page iommu: Default domain type: Translated iommu: DMA domain TLB invalidation policy: strict mode SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb vgaarb: loaded clocksource: Switched to clocksource arch_sys_counter PCI: CLS 0 bytes, default 64 Unpacking initramfs... workingset: timestamp_bits=62 max_order=21 bucket_order=0 squashfs: version 4.0 (2009/01/31) Phillip Lougher Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) io scheduler mq-deadline registered io scheduler kyber registered io scheduler bfq registered Freeing initrd memory: 2996K cannot find "mediatek,mt8195-fhctl" mtk-socinfo mtk-socinfo.0.auto: MediaTek Kompanio 1380 (MT8195) SoC detected. Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled printk: legacy console [ttyS0] disabled 11001100.serial: ttyS0 at MMIO 0x11001100 (irq = 253, base_baud = 1625000) is a ST16650V2 printk: legacy console [ttyS0] enabled Serial: AMBA driver loop: module loaded mt6359-keys: Failed to locate of_node [id: -1] mt6359-accdet: Failed to locate of_node [id: -1] mtk-spi-nor 1132c000.spi: spi frequency: 52000000 Hz usbcore: registered new interface driver usb-storage mt6397-rtc mt6359-rtc: registered as rtc0 mt6397-rtc mt6359-rtc: setting system clock to 2025-09-15T22:15:30 UTC (1757974530) mtk-lvts-thermal 1100b000.thermal-sensor: golden temp=60 vgpu11_sshub: Bringing 400000uV into 550000-550000uV thermal thermal_zone0: power_allocator: sustainable_power will be estimated thermal thermal_zone1: power_allocator: sustainable_power will be estimated thermal thermal_zone2: power_allocator: sustainable_power will be estimated thermal thermal_zone3: power_allocator: sustainable_power will be estimated thermal thermal_zone4: power_allocator: sustainable_power will be estimated thermal thermal_zone5: power_allocator: sustainable_power will be estimated thermal thermal_zone6: power_allocator: sustainable_power will be estimated thermal thermal_zone7: power_allocator: sustainable_power will be estimated thermal thermal_zone8: power_allocator: sustainable_power will be estimated mtk-lvts-thermal 11278000.thermal-sensor: golden temp=60 thermal thermal_zone9: power_allocator: sustainable_power will be estimated thermal thermal_zone10: power_allocator: sustainable_power will be estimated thermal thermal_zone11: power_allocator: sustainable_power will be estimated thermal thermal_zone12: power_allocator: sustainable_power will be estimated thermal thermal_zone13: power_allocator: sustainable_power will be estimated thermal thermal_zone14: power_allocator: sustainable_power will be estimated thermal thermal_zone15: power_allocator: sustainable_power will be estimated thermal thermal_zone16: power_allocator: sustainable_power will be estimated cpu cpu0: EM: created perf domain cpu cpu4: EM: created perf domain coreboot_table firmware:coreboot: probe with driver coreboot_table failed with error -22 hid: raw HID events driver (C) Jiri Kosina usbcore: registered new interface driver usbhid usbhid: USB HID core driver spi_master spi0: will run message pump with realtime priority hw perfevents: enabled with armv8_cortex_a55 PMU driver, 7 (0,8000003f) counters available hw perfevents: enabled with armv8_cortex_a78 PMU driver, 7 (0,8000003f) counters available mediatek-drm mediatek-drm.12.auto: Adding component match for /soc/ovl@1c000000 mediatek-drm mediatek-drm.12.auto: Adding component match for /soc/rdma@1c002000 mediatek-drm mediatek-drm.12.auto: Adding component match for /soc/color@1c003000 mediatek-drm mediatek-drm.12.auto: Adding component match for /soc/ccorr@1c004000 mediatek-drm mediatek-drm.12.auto: Adding component match for /soc/aal@1c005000 mediatek-drm mediatek-drm.12.auto: Adding component match for /soc/gamma@1c006000 mediatek-drm mediatek-drm.12.auto: Adding component match for /soc/merge@1c014000 mediatek-drm mediatek-drm.12.auto: Adding component match for /soc/dp-intf@1c015000 mediatek-disp-ovl-adaptor mediatek-disp-ovl-adaptor.15.auto: Failed to get id. type: 2, alias: -19 mediatek-disp-ovl-adaptor mediatek-disp-ovl-adaptor.15.auto: Skipping unknown component /soc/merge@1c014000 mediatek-disp-ovl-adaptor mediatek-disp-ovl-adaptor.15.auto: Failed to get id. type: 2, alias: 5 mediatek-disp-ovl-adaptor mediatek-disp-ovl-adaptor.15.auto: Skipping unknown component /soc/vpp-merge@1c110000 mediatek-drm mediatek-drm.14.auto: Adding component match for /soc/vpp-merge@1c110000 mediatek-drm mediatek-drm.14.auto: Adding component match for /soc/dp-intf@1c113000 mtk-msdc 11230000.mmc: Final PAD_DS_TUNE: 0x15011 mtk-power-controller 10006000.syscon:power-controller: /soc/syscon@10006000/power-controller/power-domain@15/power-domain@16/power-domain@18/power-domain@20: A default off power domain has been ON input: cros_ec as /devices/platform/soc/1100a000.spi/spi_master/spi0/spi0.0/1100a000.spi:ec@0:keyboard-controller/input/input0 mmc0: Host Software Queue enabled mmc0: new HS400 MMC card at address 0001 mmcblk0: mmc0:0001 DA4128 116 GiB mmcblk0: p1 p2 p3 mmcblk0boot0: mmc0:0001 DA4128 4.00 MiB mmcblk0boot1: mmc0:0001 DA4128 4.00 MiB mmcblk0rpmb: mmc0:0001 DA4128 16.0 MiB, chardev (249:0) input: cros_ec_buttons as /devices/platform/soc/1100a000.spi/spi_master/spi0/spi0.0/1100a000.spi:ec@0:keyboard-controller/input/input1 /soc/edp-tx@1c500000: Fixed dependency cycle(s) with /soc/edp-tx@1c500000/aux-bus/panel /soc/edp-tx@1c500000/aux-bus/panel: Fixed dependency cycle(s) with /soc/edp-tx@1c500000 cros-ec-spi spi0.0: Chrome EC device registered mtu3 11201000.usb: uwk - reg:0x400, version:103 mtu3 11201000.usb: dr_mode: 1, drd: auto mtu3 11201000.usb: u2p_dis_msk: 0, u3p_dis_msk: 0 mtu3 11201000.usb: usb3-drd: 1 xhci-mtk 11200000.usb: supply vusb33 not found, using dummy regulator xhci-mtk 11200000.usb: xHCI Host Controller xhci-mtk 11200000.usb: new USB bus registered, assigned bus number 1 xhci-mtk 11200000.usb: hcc params 0x01400f99 hci version 0x110 quirks 0x0000000000200010 xhci-mtk 11200000.usb: irq 287, io mem 0x11200000 xhci-mtk 11200000.usb: xHCI Host Controller xhci-mtk 11200000.usb: new USB bus registered, assigned bus number 2 xhci-mtk 11200000.usb: Host supports USB 3.2 Enhanced SuperSpeed usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.16 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: xHCI Host Controller usb usb1: Manufacturer: Linux 6.16.4 xhci-hcd usb usb1: SerialNumber: 11200000.usb hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.16 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: xHCI Host Controller usb usb2: Manufacturer: Linux 6.16.4 xhci-hcd usb usb2: SerialNumber: 11200000.usb hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected mtu3 11201000.usb: xHCI platform device register success... mtu3 112a1000.usb: uwk - reg:0x400, version:105 mtu3 112a1000.usb: dr_mode: 1, drd: auto mtu3 112a1000.usb: u2p_dis_msk: 0, u3p_dis_msk: 0 mtu3 112a1000.usb: usb3-drd: 0 xhci-mtk 112a0000.usb: supply vusb33 not found, using dummy regulator xhci-mtk 112a0000.usb: xHCI Host Controller xhci-mtk 112a0000.usb: new USB bus registered, assigned bus number 3 xhci-mtk 112a0000.usb: USB3 root hub has no ports xhci-mtk 112a0000.usb: hcc params 0x01400f99 hci version 0x110 quirks 0x0000000000200010 xhci-mtk 112a0000.usb: irq 288, io mem 0x112a0000 usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.16 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: xHCI Host Controller usb usb3: Manufacturer: Linux 6.16.4 xhci-hcd usb usb3: SerialNumber: 112a0000.usb hub 3-0:1.0: USB hub found hub 3-0:1.0: 1 port detected mtu3 112a1000.usb: xHCI platform device register success... mtu3 112b1000.usb: uwk - reg:0x400, version:106 mtu3 112b1000.usb: dr_mode: 1, drd: auto mtu3 112b1000.usb: u2p_dis_msk: 0, u3p_dis_msk: 0 mtu3 112b1000.usb: usb3-drd: 0 xhci-mtk 112b0000.usb: supply vusb33 not found, using dummy regulator xhci-mtk 112b0000.usb: xHCI Host Controller xhci-mtk 112b0000.usb: new USB bus registered, assigned bus number 4 xhci-mtk 112b0000.usb: USB3 root hub has no ports xhci-mtk 112b0000.usb: hcc params 0x01400f99 hci version 0x110 quirks 0x0000000020200010 xhci-mtk 112b0000.usb: irq 289, io mem 0x112b0000 usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.16 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: xHCI Host Controller usb usb4: Manufacturer: Linux 6.16.4 xhci-hcd usb usb4: SerialNumber: 112b0000.usb hub 4-0:1.0: USB hub found hub 4-0:1.0: 1 port detected mtu3 112b1000.usb: xHCI platform device register success... thermal thermal_zone17: power_allocator: sustainable_power will be estimated thermal thermal_zone18: power_allocator: sustainable_power will be estimated mtk-msdc 11240000.mmc: Got CD GPIO usb 1-1: new high-speed USB device number 2 using xhci-mtk usb 3-1: new high-speed USB device number 2 using xhci-mtk usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=65.02 usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1: Product: USB2.1 Hub usb 1-1: Manufacturer: GenesysLogic hub 1-1:1.0: USB hub found hub 1-1:1.0: 3 ports detected usb 4-1: new high-speed USB device number 2 using xhci-mtk usb 2-1: new SuperSpeed USB device number 2 using xhci-mtk usb 2-1: New USB device found, idVendor=05e3, idProduct=0620, bcdDevice=65.02 usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-1: Product: USB3.2 Hub usb 2-1: Manufacturer: GenesysLogic hub 2-1:1.0: USB hub found hub 2-1:1.0: 3 ports detected usb 3-1: New USB device found, idVendor=0408, idProduct=4034, bcdDevice= 0.02 usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 3-1: Product: ACER HD User Facing usb 3-1: Manufacturer: Quanta usb 3-1: SerialNumber: 01.00.00 usb 4-1: New USB device found, idVendor=04ca, idProduct=3802, bcdDevice= 1.00 usb 4-1: New USB device strings: Mfr=5, Product=6, SerialNumber=7 usb 4-1: Product: Wireless_Device usb 4-1: Manufacturer: MediaTek Inc. usb 4-1: SerialNumber: 000000000 panel-simple-dp-aux aux-1c500000.edp-tx: Detected BOE NE135FBM-N41 v8.1 (0x095f) xhci-mtk 11290000.usb: uwk - reg:0x400, version:104 xhci-mtk 11290000.usb: xHCI Host Controller xhci-mtk 11290000.usb: new USB bus registered, assigned bus number 5 xhci-mtk 11290000.usb: hcc params 0x01400f99 hci version 0x110 quirks 0x0000000000200010 xhci-mtk 11290000.usb: irq 291, io mem 0x11290000 xhci-mtk 11290000.usb: xHCI Host Controller xhci-mtk 11290000.usb: new USB bus registered, assigned bus number 6 xhci-mtk 11290000.usb: Host supports USB 3.2 Enhanced SuperSpeed usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.16 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: xHCI Host Controller usb usb5: Manufacturer: Linux 6.16.4 xhci-hcd usb usb5: SerialNumber: 11290000.usb hub 5-0:1.0: USB hub found hub 5-0:1.0: 1 port detected usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.16 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: xHCI Host Controller usb usb6: Manufacturer: Linux 6.16.4 xhci-hcd usb usb6: SerialNumber: 11290000.usb hub 6-0:1.0: USB hub found hub 6-0:1.0: 1 port detected i2c_hid_of 4-0010: supply vddl not found, using dummy regulator platform 14001000.dma-controller: Adding to iommu group 0 platform 14009000.display: Adding to iommu group 0 platform 1400c000.dma-controller: Adding to iommu group 0 platform 14f0a000.dma-controller: Adding to iommu group 0 platform 14f25000.dma-controller: Adding to iommu group 0 platform soc:jpgenc-master: Adding to iommu group 1 i2c_hid_of 4-0010: i2c_hid_get_input: IRQ triggered but there's no data platform 1c105000.dma-controller: Adding to iommu group 2 input: hid-over-i2c 04F3:4040 Touchscreen as /devices/platform/soc/11e04000.i2c/i2c-4/4-0010/0018:04F3:4040.0001/input/input2 platform 1c107000.dma-controller: Adding to iommu group 2 input: hid-over-i2c 04F3:4040 as /devices/platform/soc/11e04000.i2c/i2c-4/4-0010/0018:04F3:4040.0001/input/input3 platform 1c109000.dma-controller: Adding to iommu group 2 input: hid-over-i2c 04F3:4040 as /devices/platform/soc/11e04000.i2c/i2c-4/4-0010/0018:04F3:4040.0001/input/input4 platform 1c10b000.dma-controller: Adding to iommu group 2 input: hid-over-i2c 04F3:4040 Stylus as /devices/platform/soc/11e04000.i2c/i2c-4/4-0010/0018:04F3:4040.0001/input/input5 platform 1c114000.hdr-engine: Adding to iommu group 2 hid-generic 0018:04F3:4040.0001: input,hidraw0: I2C HID v1.00 Device [hid-over-i2c 04F3:4040] on 4-0010 mtk-iommu 14018000.iommu: bound 1c019000.larb (ops 0xffff800080611fb8) mtk-iommu 14018000.iommu: bound 1c103000.larb (ops 0xffff800080611fb8) mtk-iommu 14018000.iommu: bound 14013000.larb (ops 0xffff800080611fb8) mtk-iommu 14018000.iommu: bound 14f03000.larb (ops 0xffff800080611fb8) mtk-iommu 14018000.iommu: bound 14e05000.larb (ops 0xffff800080611fb8) mtk-iommu 14018000.iommu: bound 15340000.larb (ops 0xffff800080611fb8) mtk-iommu 14018000.iommu: bound 16002000.larb (ops 0xffff800080611fb8) mtk-iommu 14018000.iommu: bound 16012000.larb (ops 0xffff800080611fb8) mtk-iommu 14018000.iommu: bound 17201000.larb (ops 0xffff800080611fb8) mtk-iommu 14018000.iommu: bound 1b010000.larb (ops 0xffff800080611fb8) mtk-iommu 14018000.iommu: bound 1803e000.larb (ops 0xffff800080611fb8) mtk-iommu 14018000.iommu: bound 1800e000.larb (ops 0xffff800080611fb8) mtk-iommu 14018000.iommu: bound 16142000.larb (ops 0xffff800080611fb8) mtk-iommu 14018000.iommu: bound 16014000.larb (ops 0xffff800080611fb8) platform 14f08000.dma-controller: Adding to iommu group 0 platform 14f09000.dma-controller: Adding to iommu group 0 platform 14f1f000.display: Adding to iommu group 0 platform 14f23000.dma-controller: Adding to iommu group 0 platform 14f24000.dma-controller: Adding to iommu group 0 platform 18000000.video-codec: Adding to iommu group 1 platform 1a020000.video-codec: Adding to iommu group 1 platform soc:jpgdec-master: Adding to iommu group 1 platform 1c000000.ovl: Adding to iommu group 2 platform 1c002000.rdma: Adding to iommu group 2 platform 1c104000.dma-controller: Adding to iommu group 2 platform 1c106000.dma-controller: Adding to iommu group 2 platform 1c108000.dma-controller: Adding to iommu group 2 platform 1c10a000.dma-controller: Adding to iommu group 2 mtk-iommu 1c01f000.iommu: bound 1c018000.larb (ops 0xffff800080611fb8) mtk-iommu 1c01f000.iommu: bound 1c102000.larb (ops 0xffff800080611fb8) mtk-iommu 1c01f000.iommu: bound 14f02000.larb (ops 0xffff800080611fb8) mtk-iommu 1c01f000.iommu: bound 14e04000.larb (ops 0xffff800080611fb8) mtk-iommu 1c01f000.iommu: bound 15001000.larb (ops 0xffff800080611fb8) mtk-iommu 1c01f000.iommu: bound 15120000.larb (ops 0xffff800080611fb8) mtk-iommu 1c01f000.iommu: bound 15230000.larb (ops 0xffff800080611fb8) mtk-iommu 1c01f000.iommu: bound 16001000.larb (ops 0xffff800080611fb8) mtk-iommu 1c01f000.iommu: bound 16013000.larb (ops 0xffff800080611fb8) mtk-iommu 1c01f000.iommu: bound 1a010000.larb (ops 0xffff800080611fb8) mtk-iommu 1c01f000.iommu: bound 1802e000.larb (ops 0xffff800080611fb8) mtk-iommu 1c01f000.iommu: bound 1800d000.larb (ops 0xffff800080611fb8) mtk-iommu 1c01f000.iommu: bound 16141000.larb (ops 0xffff800080611fb8) mtk-iommu 1c01f000.iommu: bound 16015000.larb (ops 0xffff800080611fb8) rcu: INFO: rcu_sched detected stalls on CPUs/tasks: rcu: 5-...0: (37 ticks this GP) idle=39b4/1/0x4000000000000000 softirq=263/265 fqs=1751 rcu: (detected by 0, t=5252 jiffies, g=-919, q=73 ncpus=8) Sending NMI from CPU 0 to CPUs 5: rcu: INFO: rcu_sched detected stalls on CPUs/tasks: rcu: 5-...0: (37 ticks this GP) idle=39b4/1/0x4000000000000000 softirq=263/265 fqs=6170 rcu: (detected by 0, t=21007 jiffies, g=-919, q=73 ncpus=8) Sending NMI from CPU 0 to CPUs 5: rcu: INFO: rcu_sched detected stalls on CPUs/tasks: rcu: 5-...0: (37 ticks this GP) idle=39b4/1/0x4000000000000000 softirq=263/265 fqs=10589 rcu: (detected by 0, t=36762 jiffies, g=-919, q=73 ncpus=8) Sending NMI from CPU 0 to CPUs 5: rcu: INFO: rcu_sched detected stalls on CPUs/tasks: rcu: 5-...0: (37 ticks this GP) idle=39b4/1/0x4000000000000000 softirq=263/265 fqs=15008 rcu: (detected by 0, t=52517 jiffies, g=-919, q=73 ncpus=8) Sending NMI from CPU 0 to CPUs 5: rcu: INFO: rcu_sched detected stalls on CPUs/tasks: rcu: 5-...0: (37 ticks this GP) idle=39b4/1/0x4000000000000000 softirq=263/265 fqs=19427 rcu: (detected by 0, t=68272 jiffies, g=-919, q=73 ncpus=8) Sending NMI from CPU 0 to CPUs 5: rcu: INFO: rcu_sched detected stalls on CPUs/tasks: rcu: 5-...0: (37 ticks this GP) idle=39b4/1/0x4000000000000000 softirq=263/265 fqs=23846 rcu: (detected by 0, t=84027 jiffies, g=-919, q=73 ncpus=8) Sending NMI from CPU 0 to CPUs 5: rcu: INFO: rcu_sched detected stalls on CPUs/tasks: rcu: 5-...0: (37 ticks this GP) idle=39b4/1/0x4000000000000000 softirq=263/265 fqs=28265 rcu: (detected by 0, t=99782 jiffies, g=-919, q=73 ncpus=8) Sending NMI from CPU 0 to CPUs 5: rcu: INFO: rcu_sched detected stalls on CPUs/tasks: rcu: 5-...0: (37 ticks this GP) idle=39b4/1/0x4000000000000000 softirq=263/265 fqs=32684 rcu: (detected by 0, t=115537 jiffies, g=-919, q=73 ncpus=8) Sending NMI from CPU 0 to CPUs 5: rcu: INFO: rcu_sched detected stalls on CPUs/tasks: rcu: 5-...0: (37 ticks this GP) idle=39b4/1/0x4000000000000000 softirq=263/265 fqs=37103 rcu: (detected by 0, t=131292 jiffies, g=-919, q=73 ncpus=8) Sending NMI from CPU 0 to CPUs 5: rcu: INFO: rcu_sched detected stalls on CPUs/tasks: rcu: 5-...0: (37 ticks this GP) idle=39b4/1/0x4000000000000000 softirq=263/265 fqs=41522 rcu: (detected by 0, t=147047 jiffies, g=-919, q=73 ncpus=8) Sending NMI from CPU 0 to CPUs 5: rcu: INFO: rcu_sched detected stalls on CPUs/tasks: rcu: 5-...0: (37 ticks this GP) idle=39b4/1/0x4000000000000000 softirq=263/265 fqs=45941 rcu: (detected by 0, t=162802 jiffies, g=-919, q=73 ncpus=8) Sending NMI from CPU 0 to CPUs 5: rcu: INFO: rcu_sched detected stalls on CPUs/tasks: rcu: 5-...0: (37 ticks this GP) idle=39b4/1/0x4000000000000000 softirq=263/265 fqs=50360 rcu: (detected by 0, t=178557 jiffies, g=-919, q=73 ncpus=8) Sending NMI from CPU 0 to CPUs 5: rcu: INFO: rcu_sched detected stalls on CPUs/tasks: rcu: 5-...0: (37 ticks this GP) idle=39b4/1/0x4000000000000000 softirq=263/265 fqs=54779 rcu: (detected by 0, t=194312 jiffies, g=-919, q=73 ncpus=8) Sending NMI from CPU 0 to CPUs 5: random: crng init done rcu: INFO: rcu_sched detected stalls on CPUs/tasks: rcu: 5-...0: (37 ticks this GP) idle=39b4/1/0x4000000000000000 softirq=263/265 fqs=59198 rcu: (detected by 0, t=210067 jiffies, g=-919, q=73 ncpus=8) Sending NMI from CPU 0 to CPUs 5: rcu: INFO: rcu_sched detected stalls on CPUs/tasks: rcu: 5-...0: (37 ticks this GP) idle=39b4/1/0x4000000000000000 softirq=263/265 fqs=63617 rcu: (detected by 0, t=225822 jiffies, g=-919, q=73 ncpus=8) Sending NMI from CPU 0 to CPUs 5: rcu: INFO: rcu_sched detected stalls on CPUs/tasks: rcu: 5-...0: (37 ticks this GP) idle=39b4/1/0x4000000000000000 softirq=263/265 fqs=68036 rcu: (detected by 0, t=241577 jiffies, g=-919, q=73 ncpus=8) Sending NMI from CPU 0 to CPUs 5: rcu: INFO: rcu_sched detected stalls on CPUs/tasks: rcu: 5-...0: (37 ticks this GP) idle=39b4/1/0x4000000000000000 softirq=263/265 fqs=72455 rcu: (detected by 0, t=257332 jiffies, g=-919, q=73 ncpus=8) Sending NMI from CPU 0 to CPUs 5: rcu: INFO: rcu_sched detected stalls on CPUs/tasks: rcu: 5-...0: (37 ticks this GP) idle=39b4/1/0x4000000000000000 softirq=263/265 fqs=76874 rcu: (detected by 0, t=273087 jiffies, g=-919, q=73 ncpus=8) Sending NMI from CPU 0 to CPUs 5: rcu: INFO: rcu_sched detected stalls on CPUs/tasks: rcu: 5-...0: (37 ticks this GP) idle=39b4/1/0x4000000000000000 softirq=263/265 fqs=81293 rcu: (detected by 0, t=288842 jiffies, g=-919, q=73 ncpus=8) Sending NMI from CPU 0 to CPUs 5: rcu: INFO: rcu_sched detected stalls on CPUs/tasks: rcu: 5-...0: (37 ticks this GP) idle=39b4/1/0x4000000000000000 softirq=263/265 fqs=85712 rcu: (detected by 0, t=304597 jiffies, g=-919, q=73 ncpus=8) Sending NMI from CPU 0 to CPUs 5: rcu: INFO: rcu_sched detected stalls on CPUs/tasks: rcu: 5-...0: (37 ticks this GP) idle=39b4/1/0x4000000000000000 softirq=263/265 fqs=90131 rcu: (detected by 0, t=320352 jiffies, g=-919, q=73 ncpus=8) Sending NMI from CPU 0 to CPUs 5: rcu: INFO: rcu_sched detected stalls on CPUs/tasks: rcu: 5-...0: (37 ticks this GP) idle=39b4/1/0x4000000000000000 softirq=263/265 fqs=94550 rcu: (detected by 0, t=336107 jiffies, g=-919, q=73 ncpus=8) Sending NMI from CPU 0 to CPUs 5: rcu: INFO: rcu_sched detected stalls on CPUs/tasks: rcu: 5-...0: (37 ticks this GP) idle=39b4/1/0x4000000000000000 softirq=263/265 fqs=98969 rcu: (detected by 0, t=351862 jiffies, g=-919, q=73 ncpus=8) Sending NMI from CPU 0 to CPUs 5: rcu: INFO: rcu_sched detected stalls on CPUs/tasks: rcu: 5-...0: (37 ticks this GP) idle=39b4/1/0x4000000000000000 softirq=263/265 fqs=103388 rcu: (detected by 0, t=367617 jiffies, g=-919, q=73 ncpus=8) Sending NMI from CPU 0 to CPUs 5: rcu: INFO: rcu_sched detected stalls on CPUs/tasks: rcu: 5-...0: (37 ticks this GP) idle=39b4/1/0x4000000000000000 softirq=263/265 fqs=107807 rcu: (detected by 0, t=383372 jiffies, g=-919, q=73 ncpus=8) Sending NMI from CPU 0 to CPUs 5: rcu: INFO: rcu_sched detected stalls on CPUs/tasks: rcu: 5-...0: (37 ticks this GP) idle=39b4/1/0x4000000000000000 softirq=263/265 fqs=112226 rcu: (detected by 0, t=399127 jiffies, g=-919, q=73 ncpus=8) Sending NMI from CPU 0 to CPUs 5: rcu: INFO: rcu_sched detected stalls on CPUs/tasks: rcu: 5-...0: (37 ticks this GP) idle=39b4/1/0x4000000000000000 softirq=263/265 fqs=116645 rcu: (detected by 0, t=414882 jiffies, g=-919, q=73 ncpus=8) Sending NMI from CPU 0 to CPUs 5: rcu: INFO: rcu_sched detected stalls on CPUs/tasks: rcu: 5-...0: (37 ticks this GP) idle=39b4/1/0x4000000000000000 softirq=263/265 fqs=121064 rcu: (detected by 0, t=430637 jiffies, g=-919, q=73 ncpus=8) Sending NMI from CPU 0 to CPUs 5: rcu: INFO: rcu_sched detected stalls on CPUs/tasks: rcu: 5-...0: (37 ticks this GP) idle=39b4/1/0x4000000000000000 softirq=263/265 fqs=125483 rcu: (detected by 0, t=446392 jiffies, g=-919, q=73 ncpus=8) Sending NMI from CPU 0 to CPUs 5: rcu: INFO: rcu_sched detected stalls on CPUs/tasks: rcu: 5-...0: (37 ticks this GP) idle=39b4/1/0x4000000000000000 softirq=263/265 fqs=129902 rcu: (detected by 0, t=462147 jiffies, g=-919, q=73 ncpus=8) Sending NMI from CPU 0 to CPUs 5: rcu: INFO: rcu_sched detected stalls on CPUs/tasks: rcu: 5-...0: (37 ticks this GP) idle=39b4/1/0x4000000000000000 softirq=263/265 fqs=134321 rcu: (detected by 0, t=477902 jiffies, g=-919, q=73 ncpus=8) Sending NMI from CPU 0 to CPUs 5: rcu: INFO: rcu_sched detected stalls on CPUs/tasks: rcu: 5-...0: (37 ticks this GP) idle=39b4/1/0x4000000000000000 softirq=263/265 fqs=138740 rcu: (detected by 0, t=493657 jiffies, g=-919, q=73 ncpus=8) Sending NMI from CPU 0 to CPUs 5: rcu: INFO: rcu_sched detected stalls on CPUs/tasks: rcu: 5-...0: (37 ticks this GP) idle=39b4/1/0x4000000000000000 softirq=263/265 fqs=143159 rcu: (detected by 0, t=509412 jiffies, g=-919, q=73 ncpus=8) Sending NMI from CPU 0 to CPUs 5:

5 days, 16 hours

2
1
0 0

[PATCH 6.6.y] ksmbd: fix null pointer dereference in alloc_preauth_hash()

by Subramaniam, Sujana

From: Sujana Subramaniam <sujana.subramaniam(a)sap.com> [ Upstream commit c8b5b7c5da7d0c31c9b7190b4a7bba5281fc4780 ] The Client send malformed smb2 negotiate request. ksmbd return error response. Subsequently, the client can send smb2 session setup even thought conn->preauth_info is not allocated. This patch add KSMBD_SESS_NEED_SETUP status of connection to ignore session setup request if smb2 negotiate phase is not complete. Cc: stable(a)vger.kernel.org Tested-by: Steve French <stfrench(a)microsoft.com> Reported-by: zdi-disclosures(a)trendmicro.com # ZDI-CAN-26505 Signed-off-by: Namjae Jeon <linkinjeon(a)kernel.org> Signed-off-by: Steve French <stfrench(a)microsoft.com> Signed-off-by: Jan Alexander Preissler <akendo(a)akendo.eu> Signed-off-by: Sujana Subramaniam <sujana.subramaniam(a)sap.com> --- fs/smb/server/connection.h | 11 +++++++++++ fs/smb/server/mgmt/user_session.c | 4 ++-- fs/smb/server/smb2pdu.c | 14 +++++++++++--- 3 files changed, 24 insertions(+), 5 deletions(-) diff --git a/fs/smb/server/connection.h b/fs/smb/server/connection.h index 29ba91fc5407..45421269ddd8 100644 --- a/fs/smb/server/connection.h +++ b/fs/smb/server/connection.h @@ -27,6 +27,7 @@ enum { KSMBD_SESS_EXITING, KSMBD_SESS_NEED_RECONNECT, KSMBD_SESS_NEED_NEGOTIATE, + KSMBD_SESS_NEED_SETUP, KSMBD_SESS_RELEASING }; @@ -195,6 +196,11 @@ static inline bool ksmbd_conn_need_negotiate(struct ksmbd_conn *conn) return READ_ONCE(conn->status) == KSMBD_SESS_NEED_NEGOTIATE; } +static inline bool ksmbd_conn_need_setup(struct ksmbd_conn *conn) +{ + return READ_ONCE(conn->status) == KSMBD_SESS_NEED_SETUP; +} + static inline bool ksmbd_conn_need_reconnect(struct ksmbd_conn *conn) { return READ_ONCE(conn->status) == KSMBD_SESS_NEED_RECONNECT; @@ -225,6 +231,11 @@ static inline void ksmbd_conn_set_need_negotiate(struct ksmbd_conn *conn) WRITE_ONCE(conn->status, KSMBD_SESS_NEED_NEGOTIATE); } +static inline void ksmbd_conn_set_need_setup(struct ksmbd_conn *conn) +{ + WRITE_ONCE(conn->status, KSMBD_SESS_NEED_SETUP); +} + static inline void ksmbd_conn_set_need_reconnect(struct ksmbd_conn *conn) { WRITE_ONCE(conn->status, KSMBD_SESS_NEED_RECONNECT); diff --git a/fs/smb/server/mgmt/user_session.c b/fs/smb/server/mgmt/user_session.c index 82dcc86a32c5..408f47220c07 100644 --- a/fs/smb/server/mgmt/user_session.c +++ b/fs/smb/server/mgmt/user_session.c @@ -373,12 +373,12 @@ void destroy_previous_session(struct ksmbd_conn *conn, ksmbd_all_conn_set_status(id, KSMBD_SESS_NEED_RECONNECT); err = ksmbd_conn_wait_idle_sess_id(conn, id); if (err) { - ksmbd_all_conn_set_status(id, KSMBD_SESS_NEED_NEGOTIATE); + ksmbd_all_conn_set_status(id, KSMBD_SESS_NEED_SETUP); goto out; } ksmbd_destroy_file_table(&prev_sess->file_table); prev_sess->state = SMB2_SESSION_EXPIRED; - ksmbd_all_conn_set_status(id, KSMBD_SESS_NEED_NEGOTIATE); + ksmbd_all_conn_set_status(id, KSMBD_SESS_NEED_SETUP); out: up_write(&conn->session_lock); up_write(&sessions_table_lock); diff --git a/fs/smb/server/smb2pdu.c b/fs/smb/server/smb2pdu.c index 85e7bc3a2bd3..ae47450dc40f 100644 --- a/fs/smb/server/smb2pdu.c +++ b/fs/smb/server/smb2pdu.c @@ -1252,7 +1252,7 @@ int smb2_handle_negotiate(struct ksmbd_work *work) } conn->srv_sec_mode = le16_to_cpu(rsp->SecurityMode); - ksmbd_conn_set_need_negotiate(conn); + ksmbd_conn_set_need_setup(conn); err_out: if (rc) @@ -1273,6 +1273,9 @@ static int alloc_preauth_hash(struct ksmbd_session *sess, if (sess->Preauth_HashValue) return 0; + if (!conn->preauth_info) + return -ENOMEM; + sess->Preauth_HashValue = kmemdup(conn->preauth_info->Preauth_HashValue, PREAUTH_HASHVALUE_SIZE, GFP_KERNEL); if (!sess->Preauth_HashValue) @@ -1688,6 +1691,11 @@ int smb2_sess_setup(struct ksmbd_work *work) ksmbd_debug(SMB, "Received request for session setup\n"); + if (!ksmbd_conn_need_setup(conn) && !ksmbd_conn_good(conn)) { + work->send_no_response = 1; + return rc; + } + WORK_BUFFERS(work, req, rsp); rsp->StructureSize = cpu_to_le16(9); @@ -1919,7 +1927,7 @@ int smb2_sess_setup(struct ksmbd_work *work) if (try_delay) { ksmbd_conn_set_need_reconnect(conn); ssleep(5); - ksmbd_conn_set_need_negotiate(conn); + ksmbd_conn_set_need_setup(conn); } } smb2_set_err_rsp(work); @@ -2249,7 +2257,7 @@ int smb2_session_logoff(struct ksmbd_work *work) ksmbd_free_user(sess->user); sess->user = NULL; } - ksmbd_all_conn_set_status(sess_id, KSMBD_SESS_NEED_NEGOTIATE); + ksmbd_all_conn_set_status(sess_id, KSMBD_SESS_NEED_SETUP); rsp->StructureSize = cpu_to_le16(4); err = ksmbd_iov_pin_rsp(work, rsp, sizeof(struct smb2_logoff_rsp)); --

5 days, 17 hours

1
0
0 0

[PATCH 0/3] Fixes/improvements for SM6350 UFS

by Luca Weiss

Fix the order of the freq-table-hz property, then convert to OPP tables and add interconnect support for UFS for the SM6350 SoC. Signed-off-by: Luca Weiss <luca.weiss(a)fairphone.com> --- Luca Weiss (3): arm64: dts: qcom: sm6350: Fix wrong order of freq-table-hz for UFS arm64: dts: qcom: sm6350: Add OPP table support to UFSHC arm64: dts: qcom: sm6350: Add interconnect support to UFS arch/arm64/boot/dts/qcom/sm6350.dtsi | 49 ++++++++++++++++++++++++++++-------- 1 file changed, 39 insertions(+), 10 deletions(-) --- base-commit: eea255893718268e1ab852fb52f70c613d109b99 change-id: 20250314-sm6350-ufs-things-53c5de9fec5e Best regards, -- Luca Weiss <luca.weiss(a)fairphone.com>

5 days, 17 hours

3
5
0 0

New September Order. 40608 Tuesday, September 16, 2025 at 11:47:55 AM

by Info - Albinayah 370

Hi Stable, Please provide a quote for your products: Include: 1.Pricing (per unit) 2.Delivery cost & timeline 3.Quote expiry date Deadline: September Thanks! Kamal Prasad Albinayah Trading

5 days, 18 hours

1
0
0 0

[PATCH net 1/2] vhost-net: unbreak busy polling

by Jason Wang

Commit 67a873df0c41 ("vhost: basic in order support") pass the number of used elem to vhost_net_rx_peek_head_len() to make sure it can signal the used correctly before trying to do busy polling. But it forgets to clear the count, this would cause the count run out of sync with handle_rx() and break the busy polling. Fixing this by passing the pointer of the count and clearing it after the signaling the used. Cc: stable(a)vger.kernel.org Fixes: 67a873df0c41 ("vhost: basic in order support") Signed-off-by: Jason Wang <jasowang(a)redhat.com> --- drivers/vhost/net.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c index c6508fe0d5c8..16e39f3ab956 100644 --- a/drivers/vhost/net.c +++ b/drivers/vhost/net.c @@ -1014,7 +1014,7 @@ static int peek_head_len(struct vhost_net_virtqueue *rvq, struct sock *sk) } static int vhost_net_rx_peek_head_len(struct vhost_net *net, struct sock *sk, - bool *busyloop_intr, unsigned int count) + bool *busyloop_intr, unsigned int *count) { struct vhost_net_virtqueue *rnvq = &net->vqs[VHOST_NET_VQ_RX]; struct vhost_net_virtqueue *tnvq = &net->vqs[VHOST_NET_VQ_TX]; @@ -1024,7 +1024,8 @@ static int vhost_net_rx_peek_head_len(struct vhost_net *net, struct sock *sk, if (!len && rvq->busyloop_timeout) { /* Flush batched heads first */ - vhost_net_signal_used(rnvq, count); + vhost_net_signal_used(rnvq, *count); + *count = 0; /* Both tx vq and rx socket were polled here */ vhost_net_busy_poll(net, rvq, tvq, busyloop_intr, true); @@ -1180,7 +1181,7 @@ static void handle_rx(struct vhost_net *net) do { sock_len = vhost_net_rx_peek_head_len(net, sock->sk, - &busyloop_intr, count); + &busyloop_intr, &count); if (!sock_len) break; sock_len += sock_hlen; -- 2.34.1

5 days, 18 hours

3
15
0 0

[PATCH] gpiolib: Extend software-node support to support secondary software-nodes

by Hans de Goede

When a software-node gets added to a device which already has another fwnode as primary node it will become the secondary fwnode for that device. Currently if a software-node with GPIO properties ends up as the secondary fwnode then gpiod_find_by_fwnode() will fail to find the GPIOs. Add a check to gpiod_find_by_fwnode() to try a software-node lookup on the secondary fwnode if the GPIO was not found in the primary fwnode. Fixes: e7f9ff5dc90c ("gpiolib: add support for software nodes") Cc: stable(a)vger.kernel.org Cc: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> Signed-off-by: Hans de Goede <hansg(a)kernel.org> --- I found this issue while testing "platform/x86: x86-android-tablets: convert wm1502 devices to GPIO references": https://lore.kernel.org/platform-driver-x86/20250810-x86-andoroid-tablet-v2… which adds a software node with GPIO lookup info the a spi-10WM5102:00 device which has an ACPI fwnode as primary fwnode. --- drivers/gpio/gpiolib.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 0d2b470a252e..b619fea498c8 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -4601,6 +4601,12 @@ static struct gpio_desc *gpiod_find_by_fwnode(struct fwnode_handle *fwnode, desc = swnode_find_gpio(fwnode, con_id, idx, lookupflags); } + if (desc == ERR_PTR(-ENOENT) && fwnode && is_software_node(fwnode->secondary)) { + dev_dbg(consumer, "using secondary-swnode '%pfw' for '%s' GPIO lookup\n", + fwnode->secondary, name); + desc = swnode_find_gpio(fwnode->secondary, con_id, idx, lookupflags); + } + return desc; } -- 2.51.0

5 days, 18 hours

4
6
0 0

patch "iio: dac: ad5421: use int type to store negative error codes" added to char-misc-next

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled iio: dac: ad5421: use int type to store negative error codes to my char-misc git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git in the char-misc-next branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will also be merged in the next major kernel release during the merge window. If you have any questions about this process, please let me know. From 3379c900320954d768ed9903691fb2520926bbe3 Mon Sep 17 00:00:00 2001 From: Qianfeng Rong <rongqianfeng(a)vivo.com> Date: Mon, 1 Sep 2025 21:57:26 +0800 Subject: iio: dac: ad5421: use int type to store negative error codes Change the 'ret' variable in ad5421_update_ctrl() from unsigned int to int, as it needs to store either negative error codes or zero returned by ad5421_write_unlocked(). Fixes: 5691b23489db ("staging:iio:dac: Add AD5421 driver") Signed-off-by: Qianfeng Rong <rongqianfeng(a)vivo.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko(a)intel.com> Link: https://patch.msgid.link/20250901135726.17601-3-rongqianfeng@vivo.com Cc: <Stable(a)vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> --- drivers/iio/dac/ad5421.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/dac/ad5421.c b/drivers/iio/dac/ad5421.c index 1462ee640b16..d9d7031c4432 100644 --- a/drivers/iio/dac/ad5421.c +++ b/drivers/iio/dac/ad5421.c @@ -186,7 +186,7 @@ static int ad5421_update_ctrl(struct iio_dev *indio_dev, unsigned int set, unsigned int clr) { struct ad5421_state *st = iio_priv(indio_dev); - unsigned int ret; + int ret; mutex_lock(&st->lock); -- 2.51.0

5 days, 19 hours

1
0
0 0

patch "iio: dac: ad5360: use int type to store negative error codes" added to char-misc-next

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled iio: dac: ad5360: use int type to store negative error codes to my char-misc git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git in the char-misc-next branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will also be merged in the next major kernel release during the merge window. If you have any questions about this process, please let me know. From f9381ece76de999a2065d5b4fdd87fa17883978c Mon Sep 17 00:00:00 2001 From: Qianfeng Rong <rongqianfeng(a)vivo.com> Date: Mon, 1 Sep 2025 21:57:25 +0800 Subject: iio: dac: ad5360: use int type to store negative error codes Change the 'ret' variable in ad5360_update_ctrl() from unsigned int to int, as it needs to store either negative error codes or zero returned by ad5360_write_unlocked(). Fixes: a3e2940c24d3 ("staging:iio:dac: Add AD5360 driver") Signed-off-by: Qianfeng Rong <rongqianfeng(a)vivo.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko(a)intel.com> Link: https://patch.msgid.link/20250901135726.17601-2-rongqianfeng@vivo.com Cc: <Stable(a)vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> --- drivers/iio/dac/ad5360.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/dac/ad5360.c b/drivers/iio/dac/ad5360.c index a57b0a093112..8271849b1c83 100644 --- a/drivers/iio/dac/ad5360.c +++ b/drivers/iio/dac/ad5360.c @@ -262,7 +262,7 @@ static int ad5360_update_ctrl(struct iio_dev *indio_dev, unsigned int set, unsigned int clr) { struct ad5360_state *st = iio_priv(indio_dev); - unsigned int ret; + int ret; mutex_lock(&st->lock); -- 2.51.0

5 days, 19 hours

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror September 2025