- Linux-stable-mirror - lists.linaro.org

[PATCH 4.17.y] Revert "iommu/intel-iommu: Enable CONFIG_DMA_DIRECT_OPS=y and clean up intel_{alloc, free}_coherent()"

by Jason A. Donenfeld

From: Christoph Hellwig <hch(a)lst.de> commit 7ec916f82c48dcfc115eee2e3e0e6d400e310fc5 upstream. This commit may cause a less than required dma mask to be used for some allocations, which apparently leads to module load failures for iwlwifi sometimes. This reverts commit d657c5c73ca987214a6f9436e435b34fc60f332a. Signed-off-by: Christoph Hellwig <hch(a)lst.de> Reported-by: Fabio Coatti <fabio.coatti(a)gmail.com> Tested-by: Fabio Coatti <fabio.coatti(a)gmail.com> --- Backporting this and submitting this to stable@, because without it, ordinary WiFi is broken on a fairly vanilla Thinkpad P50, on all 4.17 kernels. drivers/iommu/Kconfig | 1 - drivers/iommu/intel-iommu.c | 62 +++++++++++++++++++++++++++---------- 2 files changed, 46 insertions(+), 17 deletions(-) diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig index b38798cc5288..f3a21343e636 100644 --- a/drivers/iommu/Kconfig +++ b/drivers/iommu/Kconfig @@ -142,7 +142,6 @@ config DMAR_TABLE config INTEL_IOMMU bool "Support for Intel IOMMU using DMA Remapping Devices" depends on PCI_MSI && ACPI && (X86 || IA64_GENERIC) - select DMA_DIRECT_OPS select IOMMU_API select IOMMU_IOVA select DMAR_TABLE diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c index 749d8f235346..6392a4964fc5 100644 --- a/drivers/iommu/intel-iommu.c +++ b/drivers/iommu/intel-iommu.c @@ -31,7 +31,6 @@ #include <linux/pci.h> #include <linux/dmar.h> #include <linux/dma-mapping.h> -#include <linux/dma-direct.h> #include <linux/mempool.h> #include <linux/memory.h> #include <linux/cpu.h> @@ -3709,30 +3708,61 @@ static void *intel_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flags, unsigned long attrs) { - void *vaddr; + struct page *page = NULL; + int order; - vaddr = dma_direct_alloc(dev, size, dma_handle, flags, attrs); - if (iommu_no_mapping(dev) || !vaddr) - return vaddr; + size = PAGE_ALIGN(size); + order = get_order(size); - *dma_handle = __intel_map_single(dev, virt_to_phys(vaddr), - PAGE_ALIGN(size), DMA_BIDIRECTIONAL, - dev->coherent_dma_mask); - if (!*dma_handle) - goto out_free_pages; - return vaddr; + if (!iommu_no_mapping(dev)) + flags &= ~(GFP_DMA | GFP_DMA32); + else if (dev->coherent_dma_mask < dma_get_required_mask(dev)) { + if (dev->coherent_dma_mask < DMA_BIT_MASK(32)) + flags |= GFP_DMA; + else + flags |= GFP_DMA32; + } + + if (gfpflags_allow_blocking(flags)) { + unsigned int count = size >> PAGE_SHIFT; + + page = dma_alloc_from_contiguous(dev, count, order, flags); + if (page && iommu_no_mapping(dev) && + page_to_phys(page) + size > dev->coherent_dma_mask) { + dma_release_from_contiguous(dev, page, count); + page = NULL; + } + } + + if (!page) + page = alloc_pages(flags, order); + if (!page) + return NULL; + memset(page_address(page), 0, size); + + *dma_handle = __intel_map_single(dev, page_to_phys(page), size, + DMA_BIDIRECTIONAL, + dev->coherent_dma_mask); + if (*dma_handle) + return page_address(page); + if (!dma_release_from_contiguous(dev, page, size >> PAGE_SHIFT)) + __free_pages(page, order); -out_free_pages: - dma_direct_free(dev, size, vaddr, *dma_handle, attrs); return NULL; } static void intel_free_coherent(struct device *dev, size_t size, void *vaddr, dma_addr_t dma_handle, unsigned long attrs) { - if (!iommu_no_mapping(dev)) - intel_unmap(dev, dma_handle, PAGE_ALIGN(size)); - dma_direct_free(dev, size, vaddr, dma_handle, attrs); + int order; + struct page *page = virt_to_page(vaddr); + + size = PAGE_ALIGN(size); + order = get_order(size); + + intel_unmap(dev, dma_handle, size); + if (!dma_release_from_contiguous(dev, page, size >> PAGE_SHIFT)) + __free_pages(page, order); } static void intel_unmap_sg(struct device *dev, struct scatterlist *sglist, -- 2.18.0

6 years, 11 months

2
1
0 0

[PATCH v3] bcache: set max writeback rate when I/O request is idle

by Coly Li

Commit b1092c9af9ed ("bcache: allow quick writeback when backing idle") allows the writeback rate to be faster if there is no I/O request on a bcache device. It works well if there is only one bcache device attached to the cache set. If there are many bcache devices attached to a cache set, it may introduce performance regression because multiple faster writeback threads of the idle bcache devices will compete the btree level locks with the bcache device who have I/O requests coming. This patch fixes the above issue by only permitting fast writebac when all bcache devices attached on the cache set are idle. And if one of the bcache devices has new I/O request coming, minimized all writeback throughput immediately and let PI controller __update_writeback_rate() to decide the upcoming writeback rate for each bcache device. Also when all bcache devices are idle, limited wrieback rate to a small number is wast of thoughput, especially when backing devices are slower non-rotation devices (e.g. SATA SSD). This patch sets a max writeback rate for each backing device if the whole cache set is idle. A faster writeback rate in idle time means new I/Os may have more available space for dirty data, and people may observe a better write performance then. Please note bcache may change its cache mode in run time, and this patch still works if the cache mode is switched from writeback mode and there is still dirty data on cache. Fixes: Commit b1092c9af9ed ("bcache: allow quick writeback when backing idle") Cc: stable(a)vger.kernel.org #4.16+ Signed-off-by: Coly Li <colyli(a)suse.de> Tested-by: Kai Krakow <kai(a)kaishome.de> Cc: Michael Lyle <mlyle(a)lyle.org> Cc: Stefan Priebe <s.priebe(a)profihost.ag> --- Channgelog: v3, Do not acquire bch_register_lock in set_at_max_writeback_rate(). v2, Fix a deadlock reported by Stefan Priebe. v1, Initial version. drivers/md/bcache/bcache.h | 10 ++-- drivers/md/bcache/request.c | 54 ++++++++++++++++++++- drivers/md/bcache/super.c | 4 ++ drivers/md/bcache/sysfs.c | 14 ++++-- drivers/md/bcache/util.c | 2 +- drivers/md/bcache/util.h | 2 +- drivers/md/bcache/writeback.c | 91 +++++++++++++++++++++++------------ 7 files changed, 133 insertions(+), 44 deletions(-) diff --git a/drivers/md/bcache/bcache.h b/drivers/md/bcache/bcache.h index 872ef4d67711..13f908be42ba 100644 --- a/drivers/md/bcache/bcache.h +++ b/drivers/md/bcache/bcache.h @@ -328,13 +328,6 @@ struct cached_dev { */ atomic_t has_dirty; - /* - * Set to zero by things that touch the backing volume-- except - * writeback. Incremented by writeback. Used to determine when to - * accelerate idle writeback. - */ - atomic_t backing_idle; - struct bch_ratelimit writeback_rate; struct delayed_work writeback_rate_update; @@ -515,6 +508,8 @@ struct cache_set { struct cache_accounting accounting; unsigned long flags; + atomic_t idle_counter; + atomic_t at_max_writeback_rate; struct cache_sb sb; @@ -524,6 +519,7 @@ struct cache_set { struct bcache_device **devices; unsigned devices_max_used; + atomic_t attached_dev_nr; struct list_head cached_devs; uint64_t cached_dev_sectors; atomic_long_t flash_dev_dirty_sectors; diff --git a/drivers/md/bcache/request.c b/drivers/md/bcache/request.c index 8eece9ef9f46..26f97acde403 100644 --- a/drivers/md/bcache/request.c +++ b/drivers/md/bcache/request.c @@ -1105,6 +1105,44 @@ static void detached_dev_do_request(struct bcache_device *d, struct bio *bio) generic_make_request(bio); } +static void quit_max_writeback_rate(struct cache_set *c, + struct cached_dev *this_dc) +{ + int i; + struct bcache_device *d; + struct cached_dev *dc; + + /* + * mutex bch_register_lock may compete with other parallel requesters, + * or attach/detach operations on other backing device. Waiting to + * the mutex lock may increase I/O request latency for seconds or more. + * To avoid such situation, if mutext_trylock() failed, only writeback + * rate of current cached device is set to 1, and __update_write_back() + * will decide writeback rate of other cached devices (remember now + * c->idle_counter is 0 already). + */ + if (mutex_trylock(&bch_register_lock)) { + for (i = 0; i < c->devices_max_used; i++) { + if (!c->devices[i]) + continue; + + if (UUID_FLASH_ONLY(&c->uuids[i])) + continue; + + d = c->devices[i]; + dc = container_of(d, struct cached_dev, disk); + /* + * set writeback rate to default minimum value, + * then let update_writeback_rate() to decide the + * upcoming rate. + */ + atomic_long_set(&dc->writeback_rate.rate, 1); + } + mutex_unlock(&bch_register_lock); + } else + atomic_long_set(&this_dc->writeback_rate.rate, 1); +} + /* Cached devices - read & write stuff */ static blk_qc_t cached_dev_make_request(struct request_queue *q, @@ -1122,7 +1160,21 @@ static blk_qc_t cached_dev_make_request(struct request_queue *q, return BLK_QC_T_NONE; } - atomic_set(&dc->backing_idle, 0); + if (likely(d->c)) { + if (atomic_read(&d->c->idle_counter)) + atomic_set(&d->c->idle_counter, 0); + /* + * If at_max_writeback_rate of cache set is true and new I/O + * comes, quit max writeback rate of all cached devices + * attached to this cache set, and set at_max_writeback_rate + * to false. + */ + if (unlikely(atomic_read(&d->c->at_max_writeback_rate) == 1)) { + atomic_set(&d->c->at_max_writeback_rate, 0); + quit_max_writeback_rate(d->c, dc); + } + } + generic_start_io_acct(q, rw, bio_sectors(bio), &d->disk->part0); bio_set_dev(bio, dc->bdev); diff --git a/drivers/md/bcache/super.c b/drivers/md/bcache/super.c index e0a92104ca23..8db6696e2bff 100644 --- a/drivers/md/bcache/super.c +++ b/drivers/md/bcache/super.c @@ -696,6 +696,8 @@ static void bcache_device_detach(struct bcache_device *d) { lockdep_assert_held(&bch_register_lock); + atomic_dec(&d->c->attached_dev_nr); + if (test_bit(BCACHE_DEV_DETACHING, &d->flags)) { struct uuid_entry *u = d->c->uuids + d->id; @@ -1144,6 +1146,7 @@ int bch_cached_dev_attach(struct cached_dev *dc, struct cache_set *c, bch_cached_dev_run(dc); bcache_device_link(&dc->disk, c, "bdev"); + atomic_inc(&c->attached_dev_nr); /* Allow the writeback thread to proceed */ up_write(&dc->writeback_lock); @@ -1695,6 +1698,7 @@ struct cache_set *bch_cache_set_alloc(struct cache_sb *sb) c->block_bits = ilog2(sb->block_size); c->nr_uuids = bucket_bytes(c) / sizeof(struct uuid_entry); c->devices_max_used = 0; + atomic_set(&c->attached_dev_nr, 0); c->btree_pages = bucket_pages(c); if (c->btree_pages > BTREE_MAX_PAGES) c->btree_pages = max_t(int, c->btree_pages / 4, diff --git a/drivers/md/bcache/sysfs.c b/drivers/md/bcache/sysfs.c index 225b15aa0340..a56067e80b10 100644 --- a/drivers/md/bcache/sysfs.c +++ b/drivers/md/bcache/sysfs.c @@ -170,7 +170,8 @@ SHOW(__bch_cached_dev) var_printf(writeback_running, "%i"); var_print(writeback_delay); var_print(writeback_percent); - sysfs_hprint(writeback_rate, dc->writeback_rate.rate << 9); + sysfs_hprint(writeback_rate, + atomic_long_read(&dc->writeback_rate.rate) << 9); sysfs_hprint(io_errors, atomic_read(&dc->io_errors)); sysfs_printf(io_error_limit, "%i", dc->error_limit); sysfs_printf(io_disable, "%i", dc->io_disable); @@ -188,7 +189,8 @@ SHOW(__bch_cached_dev) char change[20]; s64 next_io; - bch_hprint(rate, dc->writeback_rate.rate << 9); + bch_hprint(rate, + atomic_long_read(&dc->writeback_rate.rate) << 9); bch_hprint(dirty, bcache_dev_sectors_dirty(&dc->disk) << 9); bch_hprint(target, dc->writeback_rate_target << 9); bch_hprint(proportional,dc->writeback_rate_proportional << 9); @@ -255,8 +257,12 @@ STORE(__cached_dev) sysfs_strtoul_clamp(writeback_percent, dc->writeback_percent, 0, 40); - sysfs_strtoul_clamp(writeback_rate, - dc->writeback_rate.rate, 1, INT_MAX); + if (attr == &sysfs_writeback_rate) { + int v; + + sysfs_strtoul_clamp(writeback_rate, v, 1, INT_MAX); + atomic_long_set(&dc->writeback_rate.rate, v); + } sysfs_strtoul_clamp(writeback_rate_update_seconds, dc->writeback_rate_update_seconds, diff --git a/drivers/md/bcache/util.c b/drivers/md/bcache/util.c index f912c372978c..c6a99dfa1ad9 100644 --- a/drivers/md/bcache/util.c +++ b/drivers/md/bcache/util.c @@ -200,7 +200,7 @@ uint64_t bch_next_delay(struct bch_ratelimit *d, uint64_t done) { uint64_t now = local_clock(); - d->next += div_u64(done * NSEC_PER_SEC, d->rate); + d->next += div_u64(done * NSEC_PER_SEC, atomic_long_read(&d->rate)); /* Bound the time. Don't let us fall further than 2 seconds behind * (this prevents unnecessary backlog that would make it impossible diff --git a/drivers/md/bcache/util.h b/drivers/md/bcache/util.h index a1579e28049f..5ff055f0a653 100644 --- a/drivers/md/bcache/util.h +++ b/drivers/md/bcache/util.h @@ -443,7 +443,7 @@ struct bch_ratelimit { * Rate at which we want to do work, in units per second * The units here correspond to the units passed to bch_next_delay() */ - uint32_t rate; + atomic_long_t rate; }; static inline void bch_ratelimit_reset(struct bch_ratelimit *d) diff --git a/drivers/md/bcache/writeback.c b/drivers/md/bcache/writeback.c index 912e969fedba..907fa6c0d192 100644 --- a/drivers/md/bcache/writeback.c +++ b/drivers/md/bcache/writeback.c @@ -104,11 +104,56 @@ static void __update_writeback_rate(struct cached_dev *dc) dc->writeback_rate_proportional = proportional_scaled; dc->writeback_rate_integral_scaled = integral_scaled; - dc->writeback_rate_change = new_rate - dc->writeback_rate.rate; - dc->writeback_rate.rate = new_rate; + dc->writeback_rate_change = new_rate - + atomic_long_read(&dc->writeback_rate.rate); + atomic_long_set(&dc->writeback_rate.rate, new_rate); dc->writeback_rate_target = target; } +static bool set_at_max_writeback_rate(struct cache_set *c, + struct cached_dev *dc) +{ + /* + * Idle_counter is increased everytime when update_writeback_rate() is + * called. If all backing devices attached to the same cache set have + * identical dc->writeback_rate_update_seconds values, it is about 6 + * rounds of update_writeback_rate() on each backing device before + * c->at_max_writeback_rate is set to 1, and then max wrteback rate set + * to each dc->writeback_rate.rate. + * In order to avoid extra locking cost for counting exact dirty cached + * devices number, c->attached_dev_nr is used to calculate the idle + * throushold. It might be bigger if not all cached device are in write- + * back mode, but it still works well with limited extra rounds of + * update_writeback_rate(). + */ + if (atomic_inc_return(&c->idle_counter) < + atomic_read(&c->attached_dev_nr) * 6) + return false; + + if (atomic_read(&c->at_max_writeback_rate) != 1) + atomic_set(&c->at_max_writeback_rate, 1); + + atomic_long_set(&dc->writeback_rate.rate, INT_MAX); + + /* keep writeback_rate_target as existing value */ + dc->writeback_rate_proportional = 0; + dc->writeback_rate_integral_scaled = 0; + dc->writeback_rate_change = 0; + + /* + * Check c->idle_counter and c->at_max_writeback_rate agagain in case + * new I/O arrives during before set_at_max_writeback_rate() returns. + * Then the writeback rate is set to 1, and its new value should be + * decided via __update_writeback_rate(). + */ + if ((atomic_read(&c->idle_counter) < + atomic_read(&c->attached_dev_nr) * 6) || + !atomic_read(&c->at_max_writeback_rate)) + return false; + + return true; +} + static void update_writeback_rate(struct work_struct *work) { struct cached_dev *dc = container_of(to_delayed_work(work), @@ -136,13 +181,20 @@ static void update_writeback_rate(struct work_struct *work) return; } - down_read(&dc->writeback_lock); - - if (atomic_read(&dc->has_dirty) && - dc->writeback_percent) - __update_writeback_rate(dc); + if (atomic_read(&dc->has_dirty) && dc->writeback_percent) { + /* + * If the whole cache set is idle, set_at_max_writeback_rate() + * will set writeback rate to a max number. Then it is + * unncessary to update writeback rate for an idle cache set + * in maximum writeback rate number(s). + */ + if (!set_at_max_writeback_rate(c, dc)) { + down_read(&dc->writeback_lock); + __update_writeback_rate(dc); + up_read(&dc->writeback_lock); + } + } - up_read(&dc->writeback_lock); /* * CACHE_SET_IO_DISABLE might be set via sysfs interface, @@ -422,27 +474,6 @@ static void read_dirty(struct cached_dev *dc) delay = writeback_delay(dc, size); - /* If the control system would wait for at least half a - * second, and there's been no reqs hitting the backing disk - * for awhile: use an alternate mode where we have at most - * one contiguous set of writebacks in flight at a time. If - * someone wants to do IO it will be quick, as it will only - * have to contend with one operation in flight, and we'll - * be round-tripping data to the backing disk as quickly as - * it can accept it. - */ - if (delay >= HZ / 2) { - /* 3 means at least 1.5 seconds, up to 7.5 if we - * have slowed way down. - */ - if (atomic_inc_return(&dc->backing_idle) >= 3) { - /* Wait for current I/Os to finish */ - closure_sync(&cl); - /* And immediately launch a new set. */ - delay = 0; - } - } - while (!kthread_should_stop() && !test_bit(CACHE_SET_IO_DISABLE, &dc->disk.c->flags) && delay) { @@ -741,7 +772,7 @@ void bch_cached_dev_writeback_init(struct cached_dev *dc) dc->writeback_running = true; dc->writeback_percent = 10; dc->writeback_delay = 30; - dc->writeback_rate.rate = 1024; + atomic_long_set(&dc->writeback_rate.rate, 1024); dc->writeback_rate_minimum = 8; dc->writeback_rate_update_seconds = WRITEBACK_RATE_UPDATE_SECS_DEFAULT; -- 2.17.1

6 years, 11 months

2
2
0 0

[PATCH 1/3] KVM: x86: ensures all MSRs can always be KVM_GET/SET_MSR'd

by Paolo Bonzini

Some of the MSRs returned by GET_MSR_INDEX_LIST currently cannot be sent back to KVM_GET_MSR and/or KVM_SET_MSR; either they can never be sent back, or you they are only accepted under special conditions. This makes the API a pain to use. To avoid this pain, this patch makes it so that the result of the get-list ioctl can always be used for host-initiated get and set. Since we don't have a separate way to check for read-only MSRs, this means some Hyper-V MSRs are ignored when written. Arguably they should not even be in the result of GET_MSR_INDEX_LIST, but I am leaving there in case userspace is using the outcome of GET_MSR_INDEX_LIST to derive the support for the corresponding Hyper-V feature. Cc: stable(a)vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini(a)redhat.com> --- arch/x86/kvm/hyperv.c | 27 ++++++++++++++++++++------- arch/x86/kvm/hyperv.h | 2 +- arch/x86/kvm/x86.c | 15 +++++++++------ 3 files changed, 30 insertions(+), 14 deletions(-) diff --git a/arch/x86/kvm/hyperv.c b/arch/x86/kvm/hyperv.c index af8caf965baa..01d209ab5481 100644 --- a/arch/x86/kvm/hyperv.c +++ b/arch/x86/kvm/hyperv.c @@ -235,7 +235,7 @@ static int synic_set_msr(struct kvm_vcpu_hv_synic *synic, struct kvm_vcpu *vcpu = synic_to_vcpu(synic); int ret; - if (!synic->active) + if (!synic->active && !host) return 1; trace_kvm_hv_synic_set_msr(vcpu->vcpu_id, msr, data, host); @@ -295,11 +295,12 @@ static int synic_set_msr(struct kvm_vcpu_hv_synic *synic, return ret; } -static int synic_get_msr(struct kvm_vcpu_hv_synic *synic, u32 msr, u64 *pdata) +static int synic_get_msr(struct kvm_vcpu_hv_synic *synic, u32 msr, u64 *pdata, + bool host) { int ret; - if (!synic->active) + if (!synic->active && !host) return 1; ret = 0; @@ -1014,6 +1015,11 @@ static int kvm_hv_set_msr_pw(struct kvm_vcpu *vcpu, u32 msr, u64 data, case HV_X64_MSR_TSC_EMULATION_STATUS: hv->hv_tsc_emulation_status = data; break; + case HV_X64_MSR_TIME_REF_COUNT: + /* read-only, but still ignore it if host-initiated */ + if (!host) + return 1; + break; default: vcpu_unimpl(vcpu, "Hyper-V uhandled wrmsr: 0x%x data 0x%llx\n", msr, data); @@ -1101,6 +1107,12 @@ static int kvm_hv_set_msr(struct kvm_vcpu *vcpu, u32 msr, u64 data, bool host) return stimer_set_count(vcpu_to_stimer(vcpu, timer_index), data, host); } + case HV_X64_MSR_TSC_FREQUENCY: + case HV_X64_MSR_APIC_FREQUENCY: + /* read-only, but still ignore it if host-initiated */ + if (!host) + return 1; + break; default: vcpu_unimpl(vcpu, "Hyper-V uhandled wrmsr: 0x%x data 0x%llx\n", msr, data); @@ -1156,7 +1168,8 @@ static int kvm_hv_get_msr_pw(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata) return 0; } -static int kvm_hv_get_msr(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata) +static int kvm_hv_get_msr(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata, + bool host) { u64 data = 0; struct kvm_vcpu_hv *hv = &vcpu->arch.hyperv; @@ -1183,7 +1196,7 @@ static int kvm_hv_get_msr(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata) case HV_X64_MSR_SIMP: case HV_X64_MSR_EOM: case HV_X64_MSR_SINT0 ... HV_X64_MSR_SINT15: - return synic_get_msr(vcpu_to_synic(vcpu), msr, pdata); + return synic_get_msr(vcpu_to_synic(vcpu), msr, pdata, host); case HV_X64_MSR_STIMER0_CONFIG: case HV_X64_MSR_STIMER1_CONFIG: case HV_X64_MSR_STIMER2_CONFIG: @@ -1229,7 +1242,7 @@ int kvm_hv_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data, bool host) return kvm_hv_set_msr(vcpu, msr, data, host); } -int kvm_hv_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata) +int kvm_hv_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata, bool host) { if (kvm_hv_msr_partition_wide(msr)) { int r; @@ -1239,7 +1252,7 @@ int kvm_hv_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata) mutex_unlock(&vcpu->kvm->arch.hyperv.hv_lock); return r; } else - return kvm_hv_get_msr(vcpu, msr, pdata); + return kvm_hv_get_msr(vcpu, msr, pdata, host); } static __always_inline int get_sparse_bank_no(u64 valid_bank_mask, int bank_no) diff --git a/arch/x86/kvm/hyperv.h b/arch/x86/kvm/hyperv.h index 837465d69c6d..d6aa969e20f1 100644 --- a/arch/x86/kvm/hyperv.h +++ b/arch/x86/kvm/hyperv.h @@ -48,7 +48,7 @@ static inline struct kvm_vcpu *synic_to_vcpu(struct kvm_vcpu_hv_synic *synic) } int kvm_hv_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data, bool host); -int kvm_hv_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata); +int kvm_hv_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata, bool host); bool kvm_hv_hypercall_enabled(struct kvm *kvm); int kvm_hv_hypercall(struct kvm_vcpu *vcpu); diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 153564db7980..f2876053e28b 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -2166,10 +2166,11 @@ static int set_msr_mce(struct kvm_vcpu *vcpu, struct msr_data *msr_info) vcpu->arch.mcg_status = data; break; case MSR_IA32_MCG_CTL: - if (!(mcg_cap & MCG_CTL_P)) + if (!(mcg_cap & MCG_CTL_P) && + (data || !msr_info->host_initiated)) return 1; if (data != 0 && data != ~(u64)0) - return -1; + return 1; vcpu->arch.mcg_ctl = data; break; default: @@ -2557,7 +2558,7 @@ int kvm_get_msr(struct kvm_vcpu *vcpu, struct msr_data *msr) } EXPORT_SYMBOL_GPL(kvm_get_msr); -static int get_msr_mce(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata) +static int get_msr_mce(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata, bool host) { u64 data; u64 mcg_cap = vcpu->arch.mcg_cap; @@ -2572,7 +2573,7 @@ static int get_msr_mce(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata) data = vcpu->arch.mcg_cap; break; case MSR_IA32_MCG_CTL: - if (!(mcg_cap & MCG_CTL_P)) + if (!(mcg_cap & MCG_CTL_P) && !host) return 1; data = vcpu->arch.mcg_ctl; break; @@ -2705,7 +2706,8 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info) case MSR_IA32_MCG_CTL: case MSR_IA32_MCG_STATUS: case MSR_IA32_MC0_CTL ... MSR_IA32_MCx_CTL(KVM_MAX_MCE_BANKS) - 1: - return get_msr_mce(vcpu, msr_info->index, &msr_info->data); + return get_msr_mce(vcpu, msr_info->index, &msr_info->data, + msr_info->host_initiated); case MSR_K7_CLK_CTL: /* * Provide expected ramp-up count for K7. All other @@ -2726,7 +2728,8 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info) case HV_X64_MSR_TSC_EMULATION_CONTROL: case HV_X64_MSR_TSC_EMULATION_STATUS: return kvm_hv_get_msr_common(vcpu, - msr_info->index, &msr_info->data); + msr_info->index, &msr_info->data, + msr_info->host_initiated); break; case MSR_IA32_BBL_CR_CTL3: /* This legacy MSR exists but isn't fully documented in current -- 2.17.1

6 years, 11 months

1
0
0 0

Re: [PATCH 4.14 12/53] cifs: Fix slab-out-of-bounds in send_set_info() on SMB2 ACE setting

by Philip Müller

Hi Greg, hi Stefano, seems adding "cifs: Fix slab-out-of-bounds in send_set_info() on SMB2 ACE setting" (commit 748144f) [1] created a regression within linux v4.14 kernel series. Writing to a mounted cifs either freezes on writing or crashes the PC. A more detailed explanation you may find in our forums [2]. Reverting the patch, seems to "fix" it. Thoughts? Best, Philip ---------------------- Manjaro Project Lead --- [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/fs/… [2] https://forum.manjaro.org/t/53250 --- FSTAB entries: //192.168.0.100/TRANSFER /mnt/TRANSFER cifs noperm,x-systemd.automount,iocharset=utf8,file_mode=0775,dir_mode=0775,user=xxx,pass=yyy,_netdev,noacl 0 0 //192.168.0.100/MEDIA /mnt/MEDIA cifs noperm,x-systemd.automount,iocharset=utf8,file_mode=0775,dir_mode=0775,user=xxx,pass=yyy,_netdev,noacl 0 0 Message log: [ 19.785788] No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3), from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3 (or SMB2.1) specify vers=1.0 on mount. [ 20.652361] CIFS VFS: ioctl error in smb2_get_dfs_refer rc=-2 [ 20.814693] No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3), from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3 (or SMB2.1) specify vers=1.0 on mount. [ 20.992157] CIFS VFS: ioctl error in smb2_get_dfs_refer rc=-2 [ 212.648892] cache_from_obj: Wrong slab cache. cifs_request but object is from xfrm_dst_cache [ 212.648951] ------------[ cut here ]------------ [ 212.648978] WARNING: CPU: 1 PID: 1379 at mm/slab.h:377 kmem_cache_free+0x14d/0x200 [ 212.648985] Modules linked in: md4 nls_utf8 cifs ccm dns_resolver fscache cmac rfcomm fuse snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_soc_skl snd_soc_skl_ipc snd_soc_sst_ipc snd_soc_sst_dsp snd_hda_ext_core snd_soc_sst_match snd_soc_core bnep snd_compress snd_pcm_dmaengine ac97_bus vmnet(O) intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp arc4 kvm_intel i915 iTCO_wdt iTCO_vendor_support kvm iwlmvm ext4 mac80211 crc32c_generic mbcache jbd2 fscrypto irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc wmi_bmof i2c_algo_bit snd_hda_intel drm_kms_helper iwlwifi uvcvideo snd_hda_codec aesni_intel snd_hda_core videobuf2_vmalloc aes_x86_64 videobuf2_memops crypto_simd glue_helper btusb cryptd btrtl videobuf2_v4l2 btbcm intel_cstate videobuf2_core snd_hwdep intel_rapl_perf [ 212.649203] btintel drm e1000e cfg80211 bluetooth snd_pcm videodev psmouse media snd_timer pcspkr ptp pps_core thinkpad_acpi i2c_i801 evdev joydev mousedev input_leds mac_hid rtsx_pci_ms ecdh_generic crc16 memstick intel_gtt nvram agpgart snd shpchp soundcore mei_me syscopyarea rfkill sysfillrect sysimgblt mei fb_sys_fops intel_pch_thermal thermal led_class wmi battery ac video acpi_pad button sch_fq_codel vmmon(O) vmw_vmci uinput crypto_user ip_tables x_tables btrfs xor zstd_decompress zstd_compress xxhash hid_logitech_hidpp raid6_pq hid_logitech_dj usbhid hid sd_mod rtsx_pci_sdmmc mmc_core serio_raw atkbd libps2 ahci libahci xhci_pci libata xhci_hcd rtsx_pci usbcore scsi_mod usb_common i8042 serio crc32c_intel [ 212.649453] CPU: 1 PID: 1379 Comm: pool Tainted: G O 4.14.57-1-MANJARO #1 [ 212.649457] Hardware name: LENOVO 20J4000LGE/20J4000LGE, BIOS R0GET60W (1.60 ) 12/15/2017 [ 212.649465] task: ffff88a7197f8f00 task.stack: ffffb1dac2184000 [ 212.649481] RIP: 0010:kmem_cache_free+0x14d/0x200 [ 212.649488] RSP: 0018:ffffb1dac2187c90 EFLAGS: 00010246 [ 212.649497] RAX: 0000000000000050 RBX: ffff88a75ba90000 RCX: 0000000000000000 [ 212.649503] RDX: 0000000000000000 RSI: ffff88a77f4965d8 RDI: ffff88a77f4965d8 [ 212.649509] RBP: ffff88a73962f380 R08: ffffffff8d474920 R09: 000000000000035c [ 212.649515] R10: 0000000000000004 R11: ffffffff8e56a36d R12: ffff88a75812c000 [ 212.649521] R13: ffff88a77489b600 R14: ffffb1dac2187d78 R15: 0000000000000000 [ 212.649531] FS: 00007f253ccc3700(0000) GS:ffff88a77f480000(0000) knlGS:0000000000000000 [ 212.649538] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 212.649545] CR2: 00007f386b887810 CR3: 0000000211452003 CR4: 00000000003606e0 [ 212.649549] Call Trace: [ 212.649657] cifs_buf_release.part.6+0x11/0x20 [cifs] [ 212.649763] send_set_info+0x1ac/0x210 [cifs] [ 212.649878] SMB2_rmdir+0x5d/0x80 [cifs] [ 212.649977] smb2_open_op_close+0x1bd/0x220 [cifs] [ 212.649992] ? __kmalloc+0x19e/0x220 [ 212.650080] ? build_path_from_dentry_optional_prefix+0x1c1/0x400 [cifs] [ 212.650176] smb2_rmdir+0x25/0x30 [cifs] [ 212.650271] cifs_rmdir+0xb8/0x290 [cifs] [ 212.650287] vfs_rmdir+0xd1/0x140 [ 212.650300] do_rmdir+0x17d/0x1e0 [ 212.650318] do_syscall_64+0x67/0x100 [ 212.650332] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [ 212.650342] RIP: 0033:0x7f2558e5f647 [ 212.650348] RSP: 002b:00007f253ccc2b38 EFLAGS: 00000246 ORIG_RAX: 0000000000000054 [ 212.650359] RAX: ffffffffffffffda RBX: 00007f253801f500 RCX: 00007f2558e5f647 [ 212.650364] RDX: 00007f253ccc2b90 RSI: 0000563e90e93d40 RDI: 00007f253801f500 [ 212.650369] RBP: 0000563e90ab08c0 R08: 0000563e908c3468 R09: 0000563e908c3470 [ 212.650375] R10: 0000563e908df8c8 R11: 0000000000000246 R12: 00007f253ccc2b90 [ 212.650380] R13: 00007f253ccc2c20 R14: 00007f253ccc2b90 R15: 0000563e8ead215b [ 212.650389] Code: fe ff ff 48 3b a8 d8 00 00 00 0f 84 83 00 00 00 48 8b 48 60 48 8b 55 60 48 c7 c6 20 44 c3 8d 48 c7 c7 00 48 e1 8d e8 8e 44 ed ff <0f> 0b e9 ca fe ff ff 65 8b 05 6d 51 e0 72 89 c0 48 0f a3 05 8b [ 212.650572] —[ end trace 05a8377b2d80ea1c ]— [ 212.680246] cache_from_obj: Wrong slab cache. cifs_request but object is from xfrm_dst_cache [ 212.725303] cache_from_obj: Wrong slab cache. cifs_request but object is from xfrm_dst_cache [ 212.740595] general protection fault: 0000 [#1] PREEMPT SMP PTI [ 212.740602] Modules linked in: md4 nls_utf8 cifs ccm dns_resolver fscache cmac rfcomm fuse snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_soc_skl snd_soc_skl_ipc snd_soc_sst_ipc snd_soc_sst_dsp snd_hda_ext_core snd_soc_sst_match snd_soc_core bnep snd_compress snd_pcm_dmaengine ac97_bus vmnet(O) intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp arc4 kvm_intel i915 iTCO_wdt iTCO_vendor_support kvm iwlmvm ext4 mac80211 crc32c_generic mbcache jbd2 fscrypto irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc wmi_bmof i2c_algo_bit snd_hda_intel drm_kms_helper iwlwifi uvcvideo snd_hda_codec aesni_intel snd_hda_core videobuf2_vmalloc aes_x86_64 videobuf2_memops crypto_simd glue_helper btusb cryptd btrtl videobuf2_v4l2 btbcm intel_cstate videobuf2_core snd_hwdep intel_rapl_perf [ 212.740687] btintel drm e1000e cfg80211 bluetooth snd_pcm videodev psmouse media snd_timer pcspkr ptp pps_core thinkpad_acpi i2c_i801 evdev joydev mousedev input_leds mac_hid rtsx_pci_ms ecdh_generic crc16 memstick intel_gtt nvram agpgart snd shpchp soundcore mei_me syscopyarea rfkill sysfillrect sysimgblt mei fb_sys_fops intel_pch_thermal thermal led_class wmi battery ac video acpi_pad button sch_fq_codel vmmon(O) vmw_vmci uinput crypto_user ip_tables x_tables btrfs xor zstd_decompress zstd_compress xxhash hid_logitech_hidpp raid6_pq hid_logitech_dj usbhid hid sd_mod rtsx_pci_sdmmc mmc_core serio_raw atkbd libps2 ahci libahci xhci_pci libata xhci_hcd rtsx_pci usbcore scsi_mod usb_common i8042 serio crc32c_intel [ 212.740793] CPU: 1 PID: 1162 Comm: cifsd Tainted: G W O 4.14.57-1-MANJARO #1 [ 212.740797] Hardware name: LENOVO 20J4000LGE/20J4000LGE, BIOS R0GET60W (1.60 ) 12/15/2017 [ 212.740802] task: ffff88a772a99e00 task.stack: ffffb1dac1ec8000 [ 212.740810] RIP: 0010:prefetch_freepointer+0x11/0x20 [ 212.740815] RSP: 0018:ffffb1dac1ecbde0 EFLAGS: 00010202 [ 212.740820] RAX: 0000000000000000 RBX: 0c24ecb2149c4fdf RCX: 0000000000012681 [ 212.740824] RDX: 0000000000012601 RSI: 0c24ecb2149c4fdf RDI: ffff88a775401c80 [ 212.740828] RBP: 0000000001011200 R08: ffff88a775e78f00 R09: 0000000000000000 [ 212.740832] R10: 0000000000000000 R11: 000000002f32988b R12: ffff88a75ba90000 [ 212.740836] R13: ffff88a775401c80 R14: ffff88a775401c80 R15: ffffffff8d19a8b5 [ 212.740841] FS: 0000000000000000(0000) GS:ffff88a77f480000(0000) knlGS:0000000000000000 [ 212.740845] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 212.740849] CR2: 00007f386b887810 CR3: 000000013200a006 CR4: 00000000003606e0 [ 212.740852] Call Trace: [ 212.740861] kmem_cache_alloc+0x94/0x1a0 [ 212.740870] ? wait_woken+0x80/0x80 [ 212.740878] mempool_alloc+0x65/0x190 [ 212.740886] ? try_to_wake_up+0x54/0x4b0 [ 212.740925] cifs_small_buf_get+0x16/0x20 [cifs] [ 212.740957] cifs_demultiplex_thread+0x619/0xb10 [cifs] [ 212.740989] ? cifs_handle_standard+0x190/0x190 [cifs] [ 212.740996] kthread+0x119/0x130 [ 212.741003] ? kthread_create_on_node+0x60/0x60 [ 212.741011] ret_from_fork+0x35/0x40 [ 212.741016] Code: 89 d3 e8 63 f9 47 00 85 c0 0f 85 b1 70 00 00 48 83 c4 08 5b 5d 41 5c 41 5d c3 0f 1f 44 00 00 48 85 f6 74 14 48 63 47 20 48 01 c6 <48> 33 36 48 33 b7 40 01 00 00 0f 18 0e c3 90 0f 1f 44 00 00 55 [ 212.741096] RIP: prefetch_freepointer+0x11/0x20 RSP: ffffb1dac1ecbde0 [ 212.741101] —[ end trace 05a8377b2d80ea1d ]—

6 years, 11 months

3
2
0 0

patch "iio: ad9523: Fix displayed phase" added to staging-next

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled iio: ad9523: Fix displayed phase to my staging git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git in the staging-next branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will also be merged in the next major kernel release during the merge window. If you have any questions about this process, please let me know. >From 5a4e33c1c53ae7d4425f7d94e60e4458a37b349e Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen <lars(a)metafoo.de> Date: Mon, 25 Jun 2018 11:03:07 +0300 Subject: iio: ad9523: Fix displayed phase Fix the displayed phase for the ad9523 driver. Currently the most significant decimal place is dropped and all other digits are shifted one to the left. This is due to a multiplication by 10, which is not necessary, so remove it. Signed-off-by: Lars-Peter Clausen <lars(a)metafoo.de> Signed-off-by: Alexandru Ardelean <alexandru.ardelean(a)analog.com> Fixes: cd1678f9632 ("iio: frequency: New driver for AD9523 SPI Low Jitter Clock Generator") Cc: <Stable(a)vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> --- drivers/iio/frequency/ad9523.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/frequency/ad9523.c b/drivers/iio/frequency/ad9523.c index 48ea46a1bc38..37504739c277 100644 --- a/drivers/iio/frequency/ad9523.c +++ b/drivers/iio/frequency/ad9523.c @@ -653,7 +653,7 @@ static int ad9523_read_raw(struct iio_dev *indio_dev, code = (AD9523_CLK_DIST_DIV_PHASE_REV(ret) * 3141592) / AD9523_CLK_DIST_DIV_REV(ret); *val = code / 1000000; - *val2 = (code % 1000000) * 10; + *val2 = code % 1000000; return IIO_VAL_INT_PLUS_MICRO; default: return -EINVAL; -- 2.18.0

6 years, 11 months

1
0
0 0

patch "iio: sca3000: Fix missing return in switch" added to staging-next

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled iio: sca3000: Fix missing return in switch to my staging git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git in the staging-next branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will also be merged in the next major kernel release during the merge window. If you have any questions about this process, please let me know. >From c5b974bee9d2ceae4c441ae5a01e498c2674e100 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" <gustavo(a)embeddedor.com> Date: Sat, 7 Jul 2018 12:44:01 -0500 Subject: iio: sca3000: Fix missing return in switch The IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY case is missing a return and will fall through to the default case and errorenously return -EINVAL. Fix this by adding in missing *return ret*. Fixes: 626f971b5b07 ("staging:iio:accel:sca3000 Add write support to the low pass filter control") Reported-by: Jonathan Cameron <jic23(a)kernel.org> Signed-off-by: Gustavo A. R. Silva <gustavo(a)embeddedor.com> Cc: <Stable(a)vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> --- drivers/iio/accel/sca3000.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/iio/accel/sca3000.c b/drivers/iio/accel/sca3000.c index 4dceb75e3586..4964561595f5 100644 --- a/drivers/iio/accel/sca3000.c +++ b/drivers/iio/accel/sca3000.c @@ -797,6 +797,7 @@ static int sca3000_write_raw(struct iio_dev *indio_dev, mutex_lock(&st->lock); ret = sca3000_write_3db_freq(st, val); mutex_unlock(&st->lock); + return ret; default: return -EINVAL; } -- 2.18.0

6 years, 11 months

1
0
0 0

v4.9.115 build: 0 failures 0 warnings (v4.9.115)

by Build bot for Mark Brown

Tree/Branch: v4.9.115 Git describe: v4.9.115 Commit: dbcdf42bab Linux 4.9.115 Build Time: 0 min 9 sec Passed: 8 / 8 (100.00 %) Failed: 0 / 8 ( 0.00 %) Errors: 0 Warnings: 0 Section Mismatches: 0 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): ------------------------------------------------------------------------------- =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: arm-multi_v5_defconfig arm-multi_v7_defconfig x86_64-defconfig arm-allmodconfig arm-allnoconfig x86_64-allnoconfig arm-multi_v4t_defconfig x86_64-allmodconfig close failed in file object destructor: sys.excepthook is missing lost sys.stderr

6 years, 11 months

1
0
0 0

v4.4.144 build: 0 failures 17 warnings (v4.4.144)

by Build bot for Mark Brown

Tree/Branch: v4.4.144 Git describe: v4.4.144 Commit: 762b585c49 Linux 4.4.144 Build Time: 0 min 5 sec Passed: 7 / 7 (100.00 %) Failed: 0 / 7 ( 0.00 %) Errors: 0 Warnings: 17 Section Mismatches: 0 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): 17 warnings 0 mismatches : x86_64-allmodconfig ------------------------------------------------------------------------------- Warnings Summary: 17 1 ../drivers/net/ethernet/rocker/rocker.c:2172:1: warning: the frame size of 2752 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 ../drivers/media/dvb-frontends/stv090x.c:4759:1: warning: the frame size of 2056 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 ../drivers/media/dvb-frontends/stv090x.c:4565:1: warning: the frame size of 2096 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 ../drivers/media/dvb-frontends/stv090x.c:4250:1: warning: the frame size of 4832 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 ../drivers/media/dvb-frontends/stv090x.c:3436:1: warning: the frame size of 5280 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 ../drivers/media/dvb-frontends/stv090x.c:3095:1: warning: the frame size of 5864 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 ../drivers/media/dvb-frontends/stv090x.c:2513:1: warning: the frame size of 2304 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 ../drivers/media/dvb-frontends/stv090x.c:2141:1: warning: the frame size of 2104 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 ../drivers/media/dvb-frontends/stv090x.c:2073:1: warning: the frame size of 2552 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 ../drivers/media/dvb-frontends/stv090x.c:1956:1: warning: the frame size of 3264 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 ../drivers/media/dvb-frontends/stv090x.c:1858:1: warning: the frame size of 3008 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 ../drivers/media/dvb-frontends/stv090x.c:1599:1: warning: the frame size of 5296 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 ../drivers/media/dvb-frontends/stv090x.c:1211:1: warning: the frame size of 2080 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 ../drivers/media/dvb-frontends/stv090x.c:1168:1: warning: the frame size of 2080 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 ../drivers/media/dvb-frontends/stv0367.c:3147:1: warning: the frame size of 4144 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 ../drivers/media/dvb-frontends/cxd2841er.c:2401:1: warning: the frame size of 2984 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 ../drivers/media/dvb-frontends/cxd2841er.c:2282:1: warning: the frame size of 4328 bytes is larger than 2048 bytes [-Wframe-larger-than=] =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- x86_64-allmodconfig : PASS, 0 errors, 17 warnings, 0 section mismatches Warnings: ../drivers/media/dvb-frontends/stv090x.c:1858:1: warning: the frame size of 3008 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/media/dvb-frontends/stv090x.c:2141:1: warning: the frame size of 2104 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/media/dvb-frontends/stv090x.c:2513:1: warning: the frame size of 2304 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/media/dvb-frontends/stv090x.c:4565:1: warning: the frame size of 2096 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/media/dvb-frontends/stv090x.c:1956:1: warning: the frame size of 3264 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/media/dvb-frontends/stv090x.c:1599:1: warning: the frame size of 5296 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/media/dvb-frontends/stv090x.c:1211:1: warning: the frame size of 2080 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/media/dvb-frontends/stv090x.c:4250:1: warning: the frame size of 4832 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/media/dvb-frontends/stv090x.c:4759:1: warning: the frame size of 2056 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/media/dvb-frontends/stv090x.c:1168:1: warning: the frame size of 2080 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/media/dvb-frontends/stv090x.c:2073:1: warning: the frame size of 2552 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/media/dvb-frontends/stv090x.c:3095:1: warning: the frame size of 5864 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/media/dvb-frontends/stv090x.c:3436:1: warning: the frame size of 5280 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/media/dvb-frontends/stv0367.c:3147:1: warning: the frame size of 4144 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/media/dvb-frontends/cxd2841er.c:2401:1: warning: the frame size of 2984 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/media/dvb-frontends/cxd2841er.c:2282:1: warning: the frame size of 4328 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/net/ethernet/rocker/rocker.c:2172:1: warning: the frame size of 2752 bytes is larger than 2048 bytes [-Wframe-larger-than=] ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: arm-multi_v5_defconfig arm-multi_v7_defconfig x86_64-defconfig arm-allmodconfig arm-allnoconfig x86_64-allnoconfig

6 years, 11 months

1
0
0 0

[PATCH 1/3] clk: s2mps11: Fix matching when built as module and DT node contains compatible

by Krzysztof Kozlowski

When driver is built as module and DT node contains clocks compatible (e.g. "samsung,s2mps11-clk"), the module will not be autoloaded because module aliases won't match. The modalias from uevent: of:NclocksT<NULL>Csamsung,s2mps11-clk The modalias from driver: platform:s2mps11-clk The devices are instantiated by parent's MFD. However both Device Tree bindings and parent define the compatible for clocks devices. In case of module matching this DT compatible will be used. The issue will not happen if this is built-in (no need for module matching) or when clocks DT node does not contain compatible (not correct from bindings perspective but working for driver). Note when backporting to stable kernels: adjust the list of device ID entries. Cc: <stable(a)vger.kernel.org> Fixes: 53c31b3437a6 ("mfd: sec-core: Add of_compatible strings for clock MFD cells") Signed-off-by: Krzysztof Kozlowski <krzk(a)kernel.org> --- drivers/clk/clk-s2mps11.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/drivers/clk/clk-s2mps11.c b/drivers/clk/clk-s2mps11.c index d44e0eea31ec..11a1e83ff805 100644 --- a/drivers/clk/clk-s2mps11.c +++ b/drivers/clk/clk-s2mps11.c @@ -245,6 +245,36 @@ static const struct platform_device_id s2mps11_clk_id[] = { }; MODULE_DEVICE_TABLE(platform, s2mps11_clk_id); +#ifdef CONFIG_OF +/* + * Device is instantiated through parent MFD device and device matching is done + * through platform_device_id. + * + * However if device's DT node contains proper clock compatible and it is built + * as a module, then the module matching will be done trough DT aliases. This + * requires of_device_id table. In the same time this will not change the + * actual device matching so do not add .of_match_table. + */ +static const struct of_device_id s2mps11_dt_match[] = { + { + .compatible = "samsung,s2mps11-clk", + .data = (void *)S2MPS11X, + }, { + .compatible = "samsung,s2mps13-clk", + .data = (void *)S2MPS13X, + }, { + .compatible = "samsung,s2mps14-clk", + .data = (void *)S2MPS14X, + }, { + .compatible = "samsung,s5m8767-clk", + .data = (void *)S5M8767X, + }, { + /* Sentinel */ + }, +}; +MODULE_DEVICE_TABLE(of, s2mps11_dt_match); +#endif + static struct platform_driver s2mps11_clk_driver = { .driver = { .name = "s2mps11-clk", -- 2.14.1

6 years, 11 months

2
1
0 0

v4.17.10 build: 0 failures 1 warnings (v4.17.10)

by Build bot for Mark Brown

Tree/Branch: v4.17.10 Git describe: v4.17.10 Commit: 50f9e029a6 Linux 4.17.10 Build Time: 0 min 13 sec Passed: 8 / 8 (100.00 %) Failed: 0 / 8 ( 0.00 %) Errors: 0 Warnings: 1 Section Mismatches: 0 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): 1 warnings 0 mismatches : arm-allmodconfig 1 warnings 0 mismatches : arm-multi_v7_defconfig 1 warnings 0 mismatches : arm-multi_v5_defconfig ------------------------------------------------------------------------------- Warnings Summary: 1 3 ../include/net/ip6_route.h:71:12: warning: 'rt' may be used uninitialized in this function [-Wmaybe-uninitialized] =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- arm-allmodconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: ../include/net/ip6_route.h:71:12: warning: 'rt' may be used uninitialized in this function [-Wmaybe-uninitialized] ------------------------------------------------------------------------------- arm-multi_v7_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: ../include/net/ip6_route.h:71:12: warning: 'rt' may be used uninitialized in this function [-Wmaybe-uninitialized] ------------------------------------------------------------------------------- arm-multi_v5_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: ../include/net/ip6_route.h:71:12: warning: 'rt' may be used uninitialized in this function [-Wmaybe-uninitialized] ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: x86_64-allnoconfig arm-multi_v4t_defconfig x86_64-allmodconfig arm-allnoconfig x86_64-defconfig

6 years, 11 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror