From: Marek Vasut marex@denx.de
[ Upstream commit 56912da7a68c8356df6a6740476237441b0b792a ]
The original implementation of RPM handling in probe() was mostly correct, except it failed to call pm_runtime_get_*() to activate the hardware. The subsequent fix, 734882a8bf98 ("spi: cadence: Correct initialisation of runtime PM"), breaks the implementation further, to the point where the system using this hard IP on ZynqMP hangs on boot, because it accesses hardware which is gated off.
Undo 734882a8bf98 ("spi: cadence: Correct initialisation of runtime PM") and instead add missing pm_runtime_get_noresume() and move the RPM disabling all the way to the end of probe(). That makes ZynqMP not hang on boot yet again.
Fixes: 734882a8bf98 ("spi: cadence: Correct initialisation of runtime PM") Signed-off-by: Marek Vasut marex@denx.de Cc: Charles Keepax ckeepax@opensource.cirrus.com Cc: Mark Brown broonie@kernel.org Link: https://lore.kernel.org/r/20210716182133.218640-1-marex@denx.de Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-cadence.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-)
diff --git a/drivers/spi/spi-cadence.c b/drivers/spi/spi-cadence.c index a3afd1b9ac56..ceb16e70d235 100644 --- a/drivers/spi/spi-cadence.c +++ b/drivers/spi/spi-cadence.c @@ -517,6 +517,12 @@ static int cdns_spi_probe(struct platform_device *pdev) goto clk_dis_apb; }
+ pm_runtime_use_autosuspend(&pdev->dev); + pm_runtime_set_autosuspend_delay(&pdev->dev, SPI_AUTOSUSPEND_TIMEOUT); + pm_runtime_get_noresume(&pdev->dev); + pm_runtime_set_active(&pdev->dev); + pm_runtime_enable(&pdev->dev); + ret = of_property_read_u32(pdev->dev.of_node, "num-cs", &num_cs); if (ret < 0) master->num_chipselect = CDNS_SPI_DEFAULT_NUM_CS; @@ -531,11 +537,6 @@ static int cdns_spi_probe(struct platform_device *pdev) /* SPI controller initializations */ cdns_spi_init_hw(xspi);
- pm_runtime_set_active(&pdev->dev); - pm_runtime_enable(&pdev->dev); - pm_runtime_use_autosuspend(&pdev->dev); - pm_runtime_set_autosuspend_delay(&pdev->dev, SPI_AUTOSUSPEND_TIMEOUT); - irq = platform_get_irq(pdev, 0); if (irq <= 0) { ret = -ENXIO; @@ -566,6 +567,9 @@ static int cdns_spi_probe(struct platform_device *pdev)
master->bits_per_word_mask = SPI_BPW_MASK(8);
+ pm_runtime_mark_last_busy(&pdev->dev); + pm_runtime_put_autosuspend(&pdev->dev); + ret = spi_register_master(master); if (ret) { dev_err(&pdev->dev, "spi_register_master failed\n");