From: Clark Wang xiaoning.wang@nxp.com
[ Upstream commit 4df2f5e1372e9eec8f9e1b4a3025b9be23487d36 ]
When some drivers use spi to send data, spi_transfer->speed_hz is not assigned. If spidev->max_speed_hz is not assigned as well, it will cause an error in configuring the clock. Add a check for these two values before configuring the clock. An error will be returned when they are not assigned.
Signed-off-by: Clark Wang xiaoning.wang@nxp.com Link: https://lore.kernel.org/r/20210408103347.244313-2-xiaoning.wang@nxp.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-imx.c | 37 +++++++++++++++++++++---------------- 1 file changed, 21 insertions(+), 16 deletions(-)
diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index 09c9a1edb2c6..e237481dbbbb 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -64,8 +64,7 @@ struct spi_imx_data; struct spi_imx_devtype_data { void (*intctrl)(struct spi_imx_data *, int); int (*prepare_message)(struct spi_imx_data *, struct spi_message *); - int (*prepare_transfer)(struct spi_imx_data *, struct spi_device *, - struct spi_transfer *); + int (*prepare_transfer)(struct spi_imx_data *, struct spi_device *); void (*trigger)(struct spi_imx_data *); int (*rx_available)(struct spi_imx_data *); void (*reset)(struct spi_imx_data *); @@ -564,11 +563,10 @@ static int mx51_ecspi_prepare_message(struct spi_imx_data *spi_imx, }
static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx, - struct spi_device *spi, - struct spi_transfer *t) + struct spi_device *spi) { u32 ctrl = readl(spi_imx->base + MX51_ECSPI_CTRL); - u32 clk = t->speed_hz, delay; + u32 clk, delay;
/* Clear BL field and set the right value */ ctrl &= ~MX51_ECSPI_CTRL_BL_MASK; @@ -582,7 +580,7 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx, /* set clock speed */ ctrl &= ~(0xf << MX51_ECSPI_CTRL_POSTDIV_OFFSET | 0xf << MX51_ECSPI_CTRL_PREDIV_OFFSET); - ctrl |= mx51_ecspi_clkdiv(spi_imx, t->speed_hz, &clk); + ctrl |= mx51_ecspi_clkdiv(spi_imx, spi_imx->spi_bus_clk, &clk); spi_imx->spi_bus_clk = clk;
if (spi_imx->usedma) @@ -694,13 +692,12 @@ static int mx31_prepare_message(struct spi_imx_data *spi_imx, }
static int mx31_prepare_transfer(struct spi_imx_data *spi_imx, - struct spi_device *spi, - struct spi_transfer *t) + struct spi_device *spi) { unsigned int reg = MX31_CSPICTRL_ENABLE | MX31_CSPICTRL_MASTER; unsigned int clk;
- reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, t->speed_hz, &clk) << + reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, spi_imx->spi_bus_clk, &clk) << MX31_CSPICTRL_DR_SHIFT; spi_imx->spi_bus_clk = clk;
@@ -799,14 +796,13 @@ static int mx21_prepare_message(struct spi_imx_data *spi_imx, }
static int mx21_prepare_transfer(struct spi_imx_data *spi_imx, - struct spi_device *spi, - struct spi_transfer *t) + struct spi_device *spi) { unsigned int reg = MX21_CSPICTRL_ENABLE | MX21_CSPICTRL_MASTER; unsigned int max = is_imx27_cspi(spi_imx) ? 16 : 18; unsigned int clk;
- reg |= spi_imx_clkdiv_1(spi_imx->spi_clk, t->speed_hz, max, &clk) + reg |= spi_imx_clkdiv_1(spi_imx->spi_clk, spi_imx->spi_bus_clk, max, &clk) << MX21_CSPICTRL_DR_SHIFT; spi_imx->spi_bus_clk = clk;
@@ -875,13 +871,12 @@ static int mx1_prepare_message(struct spi_imx_data *spi_imx, }
static int mx1_prepare_transfer(struct spi_imx_data *spi_imx, - struct spi_device *spi, - struct spi_transfer *t) + struct spi_device *spi) { unsigned int reg = MX1_CSPICTRL_ENABLE | MX1_CSPICTRL_MASTER; unsigned int clk;
- reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, t->speed_hz, &clk) << + reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, spi_imx->spi_bus_clk, &clk) << MX1_CSPICTRL_DR_SHIFT; spi_imx->spi_bus_clk = clk;
@@ -1199,6 +1194,16 @@ static int spi_imx_setupxfer(struct spi_device *spi, if (!t) return 0;
+ if (!t->speed_hz) { + if (!spi->max_speed_hz) { + dev_err(&spi->dev, "no speed_hz provided!\n"); + return -EINVAL; + } + dev_dbg(&spi->dev, "using spi->max_speed_hz!\n"); + spi_imx->spi_bus_clk = spi->max_speed_hz; + } else + spi_imx->spi_bus_clk = t->speed_hz; + spi_imx->bits_per_word = t->bits_per_word;
/* @@ -1240,7 +1245,7 @@ static int spi_imx_setupxfer(struct spi_device *spi, spi_imx->slave_burst = t->len; }
- spi_imx->devtype_data->prepare_transfer(spi_imx, spi, t); + spi_imx->devtype_data->prepare_transfer(spi_imx, spi);
return 0; }