Subject: [PATCH 21/21] net: broadcom: Select BROADCOM_PHY for BCMGENET

From: Florian Fainelli <[email-masked]>
Date: Wed, 13 May 2020 08:51:51 -0700

[ Upstream commit 99addbe31f5524494f4d7077bcb3f6fa64c5d160 ]

The GENET controller on the Raspberry Pi 4 (2711) is typically
interfaced with an external Broadcom PHY via a RGMII electrical
interface. To make sure that delays are properly configured at the PHY
side, ensure that we the dedicated Broadcom PHY driver
(CONFIG_BROADCOM_PHY) is enabled for this to happen.

Fixes: 402482a6a78e ("net: bcmgenet: Clear ID_MODE_DIS in EXT_RGMII_OOB_CTRL when not needed")
Reported-by: Marek Szyprowski <[email-masked]>
Signed-off-by: Florian Fainelli <[email-masked]>
Signed-off-by: David S. Miller <[email-masked]>
---
 drivers/net/ethernet/broadcom/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/broadcom/Kconfig b/drivers/net/ethernet/broadcom/Kconfig
index 53055ce5dfd6..2a69c0d06f3c 100644
--- a/drivers/net/ethernet/broadcom/Kconfig
+++ b/drivers/net/ethernet/broadcom/Kconfig
@@ -69,6 +69,7 @@ config BCMGENET
 	select BCM7XXX_PHY
 	select MDIO_BCM_UNIMAC
 	select DIMLIB
+	select BROADCOM_PHY if ARCH_BCM2835
 	help
 	  This driver supports the built-in Ethernet MACs found in the
 	  Broadcom BCM7xxx Set Top Box family chipset.
-- 
2.26.2