From: Jonas Karlman jonas@kwiboo.se
[ Upstream commit 31b62a98de42cf65d76e4dcfb571af067d27d83a ]
When reading pinconf-pins from debugfs it fails to get the configured pull type on RK3568, "unsupported pinctrl type" error messages is also reported.
Fix this by adding support for RK3568 in rockchip_get_pull, including a reverse of the pull-up value swap applied in rockchip_set_pull so that pull-up is correctly reported in pinconf-pins. Also update the workaround comment to reflect affected pins, GPIO0_D3-D6.
Fixes: c0dadc0e47a8 ("pinctrl: rockchip: add support for rk3568") Signed-off-by: Jonas Karlman jonas@kwiboo.se Reviewed-by: Heiko Stuebner heiko@sntech.de Reviewed-by: Jianqun Xu jay.xu@rock-chips.com Link: https://lore.kernel.org/r/20230110172955.1258840-1-jonas@kwiboo.se Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pinctrl/pinctrl-rockchip.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c index da974ff2d75d..c3b9313e5be1 100644 --- a/drivers/pinctrl/pinctrl-rockchip.c +++ b/drivers/pinctrl/pinctrl-rockchip.c @@ -2436,10 +2436,19 @@ static int rockchip_get_pull(struct rockchip_pin_bank *bank, int pin_num) case RK3308: case RK3368: case RK3399: + case RK3568: case RK3588: pull_type = bank->pull_type[pin_num / 8]; data >>= bit; data &= (1 << RK3188_PULL_BITS_PER_PIN) - 1; + /* + * In the TRM, pull-up being 1 for everything except the GPIO0_D3-D6, + * where that pull up value becomes 3. + */ + if (ctrl->type == RK3568 && bank->bank_num == 0 && pin_num >= 27 && pin_num <= 30) { + if (data == 3) + data = 1; + }
return rockchip_pull_list[pull_type][data]; default: @@ -2497,7 +2506,7 @@ static int rockchip_set_pull(struct rockchip_pin_bank *bank, } } /* - * In the TRM, pull-up being 1 for everything except the GPIO0_D0-D6, + * In the TRM, pull-up being 1 for everything except the GPIO0_D3-D6, * where that pull up value becomes 3. */ if (ctrl->type == RK3568 && bank->bank_num == 0 && pin_num >= 27 && pin_num <= 30) {