From: Hans de Goede hdegoede@redhat.com
commit d7c93a903f33ff35aa0e6b5a8032eb9755b00826 upstream.
Commit e0082698b689 ("usb: dwc3: ulpi: conditionally resume ULPI PHY") fixed an issue where ULPI transfers would timeout if any requests where send to the phy sometime after init, giving it enough time to auto-suspend.
Commit e5f4ca3fce90 ("usb: dwc3: ulpi: Fix USB2.0 HS/FS/LS PHY suspend regression") changed the behavior to instead of clearing the DWC3_GUSB2PHYCFG_SUSPHY bit, add an extra sleep when it is set.
But on Bay Trail devices, when phy_set_mode() gets called during init, this leads to errors like these: [ 28.451522] tusb1210 dwc3.ulpi: error -110 writing val 0x01 to reg 0x0a [ 28.464089] tusb1210 dwc3.ulpi: error -110 writing val 0x01 to reg 0x0a
Add "snps,dis_u2_susphy_quirk" to the settings for Bay Trail devices to fix this. This restores the old behavior for Bay Trail devices, since previously the DWC3_GUSB2PHYCFG_SUSPHY bit would get cleared on the first ulpi_read/_write() and then was never set again.
Fixes: e5f4ca3fce90 ("usb: dwc3: ulpi: Fix USB2.0 HS/FS/LS PHY suspend regression") Cc: stable@kernel.org Cc: Serge Semin Sergey.Semin@baikalelectronics.ru Signed-off-by: Hans de Goede hdegoede@redhat.com Link: https://lore.kernel.org/r/20220213130524.18748-2-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/dwc3/dwc3-pci.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-)
--- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -119,6 +119,13 @@ static const struct property_entry dwc3_ {} };
+static const struct property_entry dwc3_pci_intel_byt_properties[] = { + PROPERTY_ENTRY_STRING("dr_mode", "peripheral"), + PROPERTY_ENTRY_BOOL("snps,dis_u2_susphy_quirk"), + PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"), + {} +}; + static const struct property_entry dwc3_pci_mrfld_properties[] = { PROPERTY_ENTRY_STRING("dr_mode", "otg"), PROPERTY_ENTRY_STRING("linux,extcon-name", "mrfld_bcove_pwrsrc"), @@ -161,6 +168,10 @@ static const struct software_node dwc3_p .properties = dwc3_pci_intel_properties, };
+static const struct software_node dwc3_pci_intel_byt_swnode = { + .properties = dwc3_pci_intel_byt_properties, +}; + static const struct software_node dwc3_pci_intel_mrfld_swnode = { .properties = dwc3_pci_mrfld_properties, }; @@ -344,7 +355,7 @@ static const struct pci_device_id dwc3_p (kernel_ulong_t) &dwc3_pci_intel_swnode, },
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_BYT), - (kernel_ulong_t) &dwc3_pci_intel_swnode, }, + (kernel_ulong_t) &dwc3_pci_intel_byt_swnode, },
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_MRFLD), (kernel_ulong_t) &dwc3_pci_intel_mrfld_swnode, },