6.8-stable review patch. If anyone has any objections, please let me know.
------------------
From: Serge Semin fancer.lancer@gmail.com
[ Upstream commit 0ebd96f5da4410c0cb8fc75e44f1009530b2f90b ]
There are three DW MAC IP-cores which can have the multiple Tx/Rx queues enabled: DW GMAC v3.7+ with AV feature, DW QoS Eth v4.x/v5.x, DW XGMAC/XLGMAC Based on the respective HW databooks, only the DW QoS Eth IP-core doesn't support the half-duplex link mode in case if more than one queues enabled:
"In multiple queue/channel configurations, for half-duplex operation, enable only the Q0/CH0 on Tx and Rx. For single queue/channel in full-duplex operation, any queue/channel can be enabled."
The rest of the IP-cores don't have such constraint. Thus in order to have the constraint applied for the DW QoS Eth MACs only, let's move the it' implementation to the respective MAC-capabilities getter and make sure the getter is called in the queues re-init procedure.
Fixes: b6cfffa7ad92 ("stmmac: fix DMA channel hang in half-duplex mode") Signed-off-by: Serge Semin fancer.lancer@gmail.com Reviewed-by: Romain Gantois romain.gantois@bootlin.com Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../net/ethernet/stmicro/stmmac/dwmac4_core.c | 7 +++++++ .../net/ethernet/stmicro/stmmac/stmmac_main.c | 19 +++---------------- 2 files changed, 10 insertions(+), 16 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c index cef25efbdff99..ec6a13e644b36 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c @@ -71,6 +71,13 @@ static void dwmac4_core_init(struct mac_device_info *hw, static void dwmac4_phylink_get_caps(struct stmmac_priv *priv) { priv->phylink_config.mac_capabilities |= MAC_2500FD; + + if (priv->plat->tx_queues_to_use > 1) + priv->phylink_config.mac_capabilities &= + ~(MAC_10HD | MAC_100HD | MAC_1000HD); + else + priv->phylink_config.mac_capabilities |= + (MAC_10HD | MAC_100HD | MAC_1000HD); }
static void dwmac4_rx_queue_enable(struct mac_device_info *hw, diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 7c6aef033a456..cbb00ca23a7c3 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -1198,17 +1198,6 @@ static int stmmac_init_phy(struct net_device *dev) return ret; }
-static void stmmac_set_half_duplex(struct stmmac_priv *priv) -{ - /* Half-Duplex can only work with single tx queue */ - if (priv->plat->tx_queues_to_use > 1) - priv->phylink_config.mac_capabilities &= - ~(MAC_10HD | MAC_100HD | MAC_1000HD); - else - priv->phylink_config.mac_capabilities |= - (MAC_10HD | MAC_100HD | MAC_1000HD); -} - static int stmmac_phy_setup(struct stmmac_priv *priv) { struct stmmac_mdio_bus_data *mdio_bus_data; @@ -1237,10 +1226,7 @@ static int stmmac_phy_setup(struct stmmac_priv *priv) priv->phylink_config.supported_interfaces);
priv->phylink_config.mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | - MAC_10FD | MAC_100FD | - MAC_1000FD; - - stmmac_set_half_duplex(priv); + MAC_10 | MAC_100 | MAC_1000;
/* Get the MAC specific capabilities */ stmmac_mac_phylink_get_caps(priv); @@ -7299,7 +7285,8 @@ int stmmac_reinit_queues(struct net_device *dev, u32 rx_cnt, u32 tx_cnt) priv->rss.table[i] = ethtool_rxfh_indir_default(i, rx_cnt);
- stmmac_set_half_duplex(priv); + stmmac_mac_phylink_get_caps(priv); + stmmac_napi_add(dev);
if (netif_running(dev))