6.12-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kamil Horák - 2N kamilh@axis.com
[ Upstream commit 3117a11fff5af9e74f4946f07cb3ca083cbbdf4b ]
Reset the bit 12 in PHY's LRE Control register upon initialization. According to the datasheet, this bit must be written to zero after every device reset.
Signed-off-by: Kamil Horák - 2N kamilh@axis.com Reviewed-by: Florian Fainelli florian.fainelli@broadcom.com Link: https://patch.msgid.link/20250708090140.61355-5-kamilh@axis.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/phy/broadcom.c | 25 +++++++++++++++++++++---- 1 file changed, 21 insertions(+), 4 deletions(-)
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c index d2a9cf3fde5a..9260c822e467 100644 --- a/drivers/net/phy/broadcom.c +++ b/drivers/net/phy/broadcom.c @@ -655,7 +655,7 @@ static int bcm5481x_read_abilities(struct phy_device *phydev) { struct device_node *np = phydev->mdio.dev.of_node; struct bcm54xx_phy_priv *priv = phydev->priv; - int i, val, err; + int i, val, err, aneg;
for (i = 0; i < ARRAY_SIZE(bcm54811_linkmodes); i++) linkmode_clear_bit(bcm54811_linkmodes[i], phydev->supported); @@ -676,9 +676,19 @@ static int bcm5481x_read_abilities(struct phy_device *phydev) if (val < 0) return val;
+ /* BCM54811 is not capable of LDS but the corresponding bit + * in LRESR is set to 1 and marked "Ignore" in the datasheet. + * So we must read the bcm54811 as unable to auto-negotiate + * in BroadR-Reach mode. + */ + if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54811) + aneg = 0; + else + aneg = val & LRESR_LDSABILITY; + linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported, - val & LRESR_LDSABILITY); + aneg); linkmode_mod_bit(ETHTOOL_LINK_MODE_100baseT1_Full_BIT, phydev->supported, val & LRESR_100_1PAIR); @@ -735,8 +745,15 @@ static int bcm54811_config_aneg(struct phy_device *phydev)
/* Aneg firstly. */ if (priv->brr_mode) { - /* BCM54811 is only capable of autonegotiation in IEEE mode */ - phydev->autoneg = 0; + /* BCM54811 is only capable of autonegotiation in IEEE mode. + * In BroadR-Reach mode, disable the Long Distance Signaling, + * the BRR mode autoneg as supported in other Broadcom PHYs. + * This bit is marked as "Reserved" and "Default 1, must be + * written to 0 after every device reset" in the datasheet. + */ + ret = phy_modify(phydev, MII_BCM54XX_LRECR, LRECR_LDSEN, 0); + if (ret < 0) + return ret; ret = bcm_config_lre_aneg(phydev, false); } else { ret = genphy_config_aneg(phydev);