Hi,
This patch was recently backported to stable kernels (v6.12.58) and it broke wlan on PinePhone, that uses 8723cs SDIO chip. The same problem appears of course on latest 6.18-rc6. Reverting this change resolves the problem.
``` $ sudo dmesg | grep -i rtw88 [ 24.940551] rtw88_8723cs mmc1:0001:1: WOW Firmware version 11.0.0, H2C version 0 [ 24.953085] rtw88_8723cs mmc1:0001:1: Firmware version 11.0.0, H2C version 0 [ 24.955892] rtw88_8723cs mmc1:0001:1: sdio read32 failed (0xf0): -110 [ 24.973135] rtw88_8723cs mmc1:0001:1: sdio write8 failed (0x1c): -110 [ 24.980673] rtw88_8723cs mmc1:0001:1: sdio read32 failed (0xf0): -110 ... [ 25.446691] rtw88_8723cs mmc1:0001:1: sdio read8 failed (0x100): -110 [ 25.453569] rtw88_8723cs mmc1:0001:1: mac power on failed [ 25.459077] rtw88_8723cs mmc1:0001:1: failed to power on mac [ 25.464841] rtw88_8723cs mmc1:0001:1: failed to setup chip efuse info [ 25.464856] rtw88_8723cs mmc1:0001:1: failed to setup chip information [ 25.478341] rtw88_8723cs mmc1:0001:1: probe with driver rtw88_8723cs failed with error -114 ```
On 25-07-24 08:48, Ping-Ke Shih wrote:
The register REG_SYS_CFG1 is used to determine chip basic information as arguments of following flows, such as download firmware and load PHY parameters, so driver read the value early (before power-on).
However, the direct IO is disallowed before power-on, or it causes wrong values, which driver recognizes a chip as a wrong type RF_1T1R, but actually RF_2T2R, causing driver warns:
rtw88_8822cs mmc1:0001:1: unsupported rf path (1)
Fix it by using indirect IO before power-on.
Reported-by: Piotr Oniszczuk piotr.oniszczuk@gmail.com Closes: https://lore.kernel.org/linux-wireless/699C22B4-A3E3-4206-97D0-22AB3348EBF6@... Suggested-by: Bitterblue Smith rtl8821cerfe2@gmail.com Signed-off-by: Ping-Ke Shih pkshih@realtek.com
drivers/net/wireless/realtek/rtw88/sdio.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/net/wireless/realtek/rtw88/sdio.c b/drivers/net/wireless/realtek/rtw88/sdio.c index cc2d4fef3587..99d7c629eac6 100644 --- a/drivers/net/wireless/realtek/rtw88/sdio.c +++ b/drivers/net/wireless/realtek/rtw88/sdio.c @@ -144,6 +144,10 @@ static u32 rtw_sdio_to_io_address(struct rtw_dev *rtwdev, u32 addr, static bool rtw_sdio_use_direct_io(struct rtw_dev *rtwdev, u32 addr) {
- if (!test_bit(RTW_FLAG_POWERON, rtwdev->flags) &&
!rtw_sdio_is_bus_addr(addr))return false;- return !rtw_sdio_is_sdio30_supported(rtwdev) || rtw_sdio_is_bus_addr(addr);
}
2.25.1