From: DENG Qingfang dqfext@gmail.com
[ Upstream commit 5e5502e012b8129e11be616acb0f9c34bc8f8adb ]
When a client moves from a DSA user port to a software port in a bridge, it cannot reach any other clients that connected to the DSA user ports. That is because SA learning on the CPU port is disabled, so the switch ignores the client's frames from the CPU port and still thinks it is at the user port.
Fix it by enabling SA learning on the CPU port.
To prevent the switch from learning from flooding frames from the CPU port, set skb->offload_fwd_mark to 1 for unicast and broadcast frames, and let the switch flood them instead of trapping to the CPU port. Multicast frames still need to be trapped to the CPU port for snooping, so set the SA_DIS bit of the MTK tag to 1 when transmitting those frames to disable SA learning.
Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Signed-off-by: DENG Qingfang dqfext@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/dsa/mt7530.c | 9 ++------- drivers/net/dsa/mt7530.h | 1 + net/dsa/tag_mtk.c | 15 +++++++++++++++ 3 files changed, 18 insertions(+), 7 deletions(-)
--- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -639,11 +639,8 @@ mt7530_cpu_port_enable(struct mt7530_pri mt7530_write(priv, MT7530_PVC_P(port), PORT_SPEC_TAG);
- /* Disable auto learning on the cpu port */ - mt7530_set(priv, MT7530_PSC_P(port), SA_DIS); - - /* Unknown unicast frame fordwarding to the cpu port */ - mt7530_set(priv, MT7530_MFC, UNU_FFP(BIT(port))); + /* Unknown multicast frame forwarding to the cpu port */ + mt7530_rmw(priv, MT7530_MFC, UNM_FFP_MASK, UNM_FFP(BIT(port)));
/* Set CPU port number */ if (priv->id == ID_MT7621) @@ -1246,8 +1243,6 @@ mt7530_setup(struct dsa_switch *ds) /* Enable and reset MIB counters */ mt7530_mib_reset(ds);
- mt7530_clear(priv, MT7530_MFC, UNU_FFP_MASK); - for (i = 0; i < MT7530_NUM_PORTS; i++) { /* Disable forwarding by default on all ports */ mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK, --- a/drivers/net/dsa/mt7530.h +++ b/drivers/net/dsa/mt7530.h @@ -31,6 +31,7 @@ enum { #define MT7530_MFC 0x10 #define BC_FFP(x) (((x) & 0xff) << 24) #define UNM_FFP(x) (((x) & 0xff) << 16) +#define UNM_FFP_MASK UNM_FFP(~0) #define UNU_FFP(x) (((x) & 0xff) << 8) #define UNU_FFP_MASK UNU_FFP(~0) #define CPU_EN BIT(7) --- a/net/dsa/tag_mtk.c +++ b/net/dsa/tag_mtk.c @@ -15,6 +15,7 @@ #define MTK_HDR_XMIT_TAGGED_TPID_8100 1 #define MTK_HDR_RECV_SOURCE_PORT_MASK GENMASK(2, 0) #define MTK_HDR_XMIT_DP_BIT_MASK GENMASK(5, 0) +#define MTK_HDR_XMIT_SA_DIS BIT(6)
static struct sk_buff *mtk_tag_xmit(struct sk_buff *skb, struct net_device *dev) @@ -22,6 +23,9 @@ static struct sk_buff *mtk_tag_xmit(stru struct dsa_port *dp = dsa_slave_to_port(dev); u8 *mtk_tag; bool is_vlan_skb = true; + unsigned char *dest = eth_hdr(skb)->h_dest; + bool is_multicast_skb = is_multicast_ether_addr(dest) && + !is_broadcast_ether_addr(dest);
/* Build the special tag after the MAC Source Address. If VLAN header * is present, it's required that VLAN header and special tag is @@ -47,6 +51,10 @@ static struct sk_buff *mtk_tag_xmit(stru MTK_HDR_XMIT_UNTAGGED; mtk_tag[1] = (1 << dp->index) & MTK_HDR_XMIT_DP_BIT_MASK;
+ /* Disable SA learning for multicast frames */ + if (unlikely(is_multicast_skb)) + mtk_tag[1] |= MTK_HDR_XMIT_SA_DIS; + /* Tag control information is kept for 802.1Q */ if (!is_vlan_skb) { mtk_tag[2] = 0; @@ -61,6 +69,9 @@ static struct sk_buff *mtk_tag_rcv(struc { int port; __be16 *phdr, hdr; + unsigned char *dest = eth_hdr(skb)->h_dest; + bool is_multicast_skb = is_multicast_ether_addr(dest) && + !is_broadcast_ether_addr(dest);
if (unlikely(!pskb_may_pull(skb, MTK_HDR_LEN))) return NULL; @@ -86,6 +97,10 @@ static struct sk_buff *mtk_tag_rcv(struc if (!skb->dev) return NULL;
+ /* Only unicast or broadcast frames are offloaded */ + if (likely(!is_multicast_skb)) + skb->offload_fwd_mark = 1; + return skb; }