From: Nicolas Pitre nicolas.pitre@linaro.org

commit b99afae1390140f5b0039e6b37a7380de31ae874 upstream.

The naked attribute is known to confuse some old gcc versions when function arguments aren't explicitly listed as inline assembly operands despite the gcc documentation. That resulted in commit 9a40ac86152c ("ARM: 6164/1: Add kto and kfrom to input operands list.").

Yet that commit has problems of its own by having assembly operand constraints completely wrong. If the generated code has been OK since then, it is due to luck rather than correctness. So this patch also provides proper assembly operand constraints, and removes two instances of redundant register usages in the implementation while at it.

Inspection of the generated code with this patch doesn't show any obvious quality degradation either, so not relying on __naked at all will make the code less fragile, and avoid some issues with clang.

The only remaining __naked instances (excluding the kprobes test cases) are exynos_pm_power_up_setup(), tc2_pm_power_up_setup() and

cci_enable_port_for_self(. But in the first two cases, only the function address is used by the compiler with no chance of inlining it by mistake, and the third case is called from assembly code only. And the fact that no stack is available when the corresponding code is executed does warrant the __naked usage in those cases.

Signed-off-by: Nicolas Pitre nico@linaro.org Reviewed-by: Stefan Agner stefan@agner.ch Tested-by: Stefan Agner stefan@agner.ch Signed-off-by: Russell King rmk+kernel@armlinux.org.uk Signed-off-by: Anders Roxell anders.roxell@linaro.org --- arch/arm/mm/copypage-fa.c | 35 ++++++------ arch/arm/mm/copypage-feroceon.c | 98 ++++++++++++++++----------------- arch/arm/mm/copypage-v4mc.c | 19 +++---- arch/arm/mm/copypage-v4wb.c | 41 +++++++------- arch/arm/mm/copypage-v4wt.c | 37 ++++++------- arch/arm/mm/copypage-xsc3.c | 71 +++++++++++------------- arch/arm/mm/copypage-xscale.c | 71 ++++++++++++------------ 7 files changed, 178 insertions(+), 194 deletions(-)

diff --git a/arch/arm/mm/copypage-fa.c b/arch/arm/mm/copypage-fa.c index d130a5ece5d5..bf24690ec83a 100644 --- a/arch/arm/mm/copypage-fa.c +++ b/arch/arm/mm/copypage-fa.c @@ -17,26 +17,25 @@ /* * Faraday optimised copy_user_page */ -static void __naked -fa_copy_user_page(void *kto, const void *kfrom) +static void fa_copy_user_page(void *kto, const void *kfrom) { - asm("\ - stmfd sp!, {r4, lr} @ 2\n\ - mov r2, %0 @ 1\n\ -1: ldmia r1!, {r3, r4, ip, lr} @ 4\n\ - stmia r0, {r3, r4, ip, lr} @ 4\n\ - mcr p15, 0, r0, c7, c14, 1 @ 1 clean and invalidate D line\n\ - add r0, r0, #16 @ 1\n\ - ldmia r1!, {r3, r4, ip, lr} @ 4\n\ - stmia r0, {r3, r4, ip, lr} @ 4\n\ - mcr p15, 0, r0, c7, c14, 1 @ 1 clean and invalidate D line\n\ - add r0, r0, #16 @ 1\n\ - subs r2, r2, #1 @ 1\n\ + int tmp; + + asm volatile ("\ +1: ldmia %1!, {r3, r4, ip, lr} @ 4\n\ + stmia %0, {r3, r4, ip, lr} @ 4\n\ + mcr p15, 0, %0, c7, c14, 1 @ 1 clean and invalidate D line\n\ + add %0, %0, #16 @ 1\n\ + ldmia %1!, {r3, r4, ip, lr} @ 4\n\ + stmia %0, {r3, r4, ip, lr} @ 4\n\ + mcr p15, 0, %0, c7, c14, 1 @ 1 clean and invalidate D line\n\ + add %0, %0, #16 @ 1\n\ + subs %2, %2, #1 @ 1\n\ bne 1b @ 1\n\ - mcr p15, 0, r2, c7, c10, 4 @ 1 drain WB\n\ - ldmfd sp!, {r4, pc} @ 3" - : - : "I" (PAGE_SIZE / 32)); + mcr p15, 0, %2, c7, c10, 4 @ 1 drain WB" + : "+&r" (kto), "+&r" (kfrom), "=&r" (tmp) + : "2" (PAGE_SIZE / 32) + : "r3", "r4", "ip", "lr"); }

void fa_copy_user_highpage(struct page *to, struct page *from, diff --git a/arch/arm/mm/copypage-feroceon.c b/arch/arm/mm/copypage-feroceon.c index 49ee0c1a7209..cc819732d9b8 100644 --- a/arch/arm/mm/copypage-feroceon.c +++ b/arch/arm/mm/copypage-feroceon.c @@ -13,58 +13,56 @@ #include <linux/init.h> #include <linux/highmem.h>

-static void __naked -feroceon_copy_user_page(void *kto, const void *kfrom) +static void feroceon_copy_user_page(void *kto, const void *kfrom) { - asm("\ - stmfd sp!, {r4-r9, lr} \n\ - mov ip, %2 \n\ -1: mov lr, r1 \n\ - ldmia r1!, {r2 - r9} \n\ - pld [lr, #32] \n\ - pld [lr, #64] \n\ - pld [lr, #96] \n\ - pld [lr, #128] \n\ - pld [lr, #160] \n\ - pld [lr, #192] \n\ - pld [lr, #224] \n\ - stmia r0, {r2 - r9} \n\ - ldmia r1!, {r2 - r9} \n\ - mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line\n\ - add r0, r0, #32 \n\ - stmia r0, {r2 - r9} \n\ - ldmia r1!, {r2 - r9} \n\ - mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line\n\ - add r0, r0, #32 \n\ - stmia r0, {r2 - r9} \n\ - ldmia r1!, {r2 - r9} \n\ - mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line\n\ - add r0, r0, #32 \n\ - stmia r0, {r2 - r9} \n\ - ldmia r1!, {r2 - r9} \n\ - mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line\n\ - add r0, r0, #32 \n\ - stmia r0, {r2 - r9} \n\ - ldmia r1!, {r2 - r9} \n\ - mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line\n\ - add r0, r0, #32 \n\ - stmia r0, {r2 - r9} \n\ - ldmia r1!, {r2 - r9} \n\ - mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line\n\ - add r0, r0, #32 \n\ - stmia r0, {r2 - r9} \n\ - ldmia r1!, {r2 - r9} \n\ - mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line\n\ - add r0, r0, #32 \n\ - stmia r0, {r2 - r9} \n\ - subs ip, ip, #(32 * 8) \n\ - mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line\n\ - add r0, r0, #32 \n\ + int tmp; + + asm volatile ("\ +1: ldmia %1!, {r2 - r7, ip, lr} \n\ + pld [%1, #0] \n\ + pld [%1, #32] \n\ + pld [%1, #64] \n\ + pld [%1, #96] \n\ + pld [%1, #128] \n\ + pld [%1, #160] \n\ + pld [%1, #192] \n\ + stmia %0, {r2 - r7, ip, lr} \n\ + ldmia %1!, {r2 - r7, ip, lr} \n\ + mcr p15, 0, %0, c7, c14, 1 @ clean and invalidate D line\n\ + add %0, %0, #32 \n\ + stmia %0, {r2 - r7, ip, lr} \n\ + ldmia %1!, {r2 - r7, ip, lr} \n\ + mcr p15, 0, %0, c7, c14, 1 @ clean and invalidate D line\n\ + add %0, %0, #32 \n\ + stmia %0, {r2 - r7, ip, lr} \n\ + ldmia %1!, {r2 - r7, ip, lr} \n\ + mcr p15, 0, %0, c7, c14, 1 @ clean and invalidate D line\n\ + add %0, %0, #32 \n\ + stmia %0, {r2 - r7, ip, lr} \n\ + ldmia %1!, {r2 - r7, ip, lr} \n\ + mcr p15, 0, %0, c7, c14, 1 @ clean and invalidate D line\n\ + add %0, %0, #32 \n\ + stmia %0, {r2 - r7, ip, lr} \n\ + ldmia %1!, {r2 - r7, ip, lr} \n\ + mcr p15, 0, %0, c7, c14, 1 @ clean and invalidate D line\n\ + add %0, %0, #32 \n\ + stmia %0, {r2 - r7, ip, lr} \n\ + ldmia %1!, {r2 - r7, ip, lr} \n\ + mcr p15, 0, %0, c7, c14, 1 @ clean and invalidate D line\n\ + add %0, %0, #32 \n\ + stmia %0, {r2 - r7, ip, lr} \n\ + ldmia %1!, {r2 - r7, ip, lr} \n\ + mcr p15, 0, %0, c7, c14, 1 @ clean and invalidate D line\n\ + add %0, %0, #32 \n\ + stmia %0, {r2 - r7, ip, lr} \n\ + subs %2, %2, #(32 * 8) \n\ + mcr p15, 0, %0, c7, c14, 1 @ clean and invalidate D line\n\ + add %0, %0, #32 \n\ bne 1b \n\ - mcr p15, 0, ip, c7, c10, 4 @ drain WB\n\ - ldmfd sp!, {r4-r9, pc}" - : - : "r" (kto), "r" (kfrom), "I" (PAGE_SIZE)); + mcr p15, 0, %2, c7, c10, 4 @ drain WB" + : "+&r" (kto), "+&r" (kfrom), "=&r" (tmp) + : "2" (PAGE_SIZE) + : "r2", "r3", "r4", "r5", "r6", "r7", "ip", "lr"); }

void feroceon_copy_user_highpage(struct page *to, struct page *from, diff --git a/arch/arm/mm/copypage-v4mc.c b/arch/arm/mm/copypage-v4mc.c index 0224416cba3c..b03202cddddb 100644 --- a/arch/arm/mm/copypage-v4mc.c +++ b/arch/arm/mm/copypage-v4mc.c @@ -40,12 +40,11 @@ static DEFINE_RAW_SPINLOCK(minicache_lock); * instruction. If your processor does not supply this, you have to write your * own copy_user_highpage that does the right thing. */ -static void __naked -mc_copy_user_page(void *from, void *to) +static void mc_copy_user_page(void *from, void *to) { - asm volatile( - "stmfd sp!, {r4, lr} @ 2\n\ - mov r4, %2 @ 1\n\ + int tmp; + + asm volatile ("\ ldmia %0!, {r2, r3, ip, lr} @ 4\n\ 1: mcr p15, 0, %1, c7, c6, 1 @ 1 invalidate D line\n\ stmia %1!, {r2, r3, ip, lr} @ 4\n\ @@ -55,13 +54,13 @@ mc_copy_user_page(void *from, void *to) mcr p15, 0, %1, c7, c6, 1 @ 1 invalidate D line\n\ stmia %1!, {r2, r3, ip, lr} @ 4\n\ ldmia %0!, {r2, r3, ip, lr} @ 4\n\ - subs r4, r4, #1 @ 1\n\ + subs %2, %2, #1 @ 1\n\ stmia %1!, {r2, r3, ip, lr} @ 4\n\ ldmneia %0!, {r2, r3, ip, lr} @ 4\n\ - bne 1b @ 1\n\ - ldmfd sp!, {r4, pc} @ 3" - : - : "r" (from), "r" (to), "I" (PAGE_SIZE / 64)); + bne 1b @ " + : "+&r" (from), "+&r" (to), "=&r" (tmp) + : "2" (PAGE_SIZE / 64) + : "r2", "r3", "ip", "lr"); }

void v4_mc_copy_user_highpage(struct page *to, struct page *from, diff --git a/arch/arm/mm/copypage-v4wb.c b/arch/arm/mm/copypage-v4wb.c index 067d0fdd630c..cd3e165afeed 100644 --- a/arch/arm/mm/copypage-v4wb.c +++ b/arch/arm/mm/copypage-v4wb.c @@ -22,29 +22,28 @@ * instruction. If your processor does not supply this, you have to write your * own copy_user_highpage that does the right thing. */ -static void __naked -v4wb_copy_user_page(void *kto, const void *kfrom) +static void v4wb_copy_user_page(void *kto, const void *kfrom) { - asm("\ - stmfd sp!, {r4, lr} @ 2\n\ - mov r2, %2 @ 1\n\ - ldmia r1!, {r3, r4, ip, lr} @ 4\n\ -1: mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line\n\ - stmia r0!, {r3, r4, ip, lr} @ 4\n\ - ldmia r1!, {r3, r4, ip, lr} @ 4+1\n\ - stmia r0!, {r3, r4, ip, lr} @ 4\n\ - ldmia r1!, {r3, r4, ip, lr} @ 4\n\ - mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line\n\ - stmia r0!, {r3, r4, ip, lr} @ 4\n\ - ldmia r1!, {r3, r4, ip, lr} @ 4\n\ - subs r2, r2, #1 @ 1\n\ - stmia r0!, {r3, r4, ip, lr} @ 4\n\ - ldmneia r1!, {r3, r4, ip, lr} @ 4\n\ + int tmp; + + asm volatile ("\ + ldmia %1!, {r3, r4, ip, lr} @ 4\n\ +1: mcr p15, 0, %0, c7, c6, 1 @ 1 invalidate D line\n\ + stmia %0!, {r3, r4, ip, lr} @ 4\n\ + ldmia %1!, {r3, r4, ip, lr} @ 4+1\n\ + stmia %0!, {r3, r4, ip, lr} @ 4\n\ + ldmia %1!, {r3, r4, ip, lr} @ 4\n\ + mcr p15, 0, %0, c7, c6, 1 @ 1 invalidate D line\n\ + stmia %0!, {r3, r4, ip, lr} @ 4\n\ + ldmia %1!, {r3, r4, ip, lr} @ 4\n\ + subs %2, %2, #1 @ 1\n\ + stmia %0!, {r3, r4, ip, lr} @ 4\n\ + ldmneia %1!, {r3, r4, ip, lr} @ 4\n\ bne 1b @ 1\n\ - mcr p15, 0, r1, c7, c10, 4 @ 1 drain WB\n\ - ldmfd sp!, {r4, pc} @ 3" - : - : "r" (kto), "r" (kfrom), "I" (PAGE_SIZE / 64)); + mcr p15, 0, %1, c7, c10, 4 @ 1 drain WB" + : "+&r" (kto), "+&r" (kfrom), "=&r" (tmp) + : "2" (PAGE_SIZE / 64) + : "r3", "r4", "ip", "lr"); }

void v4wb_copy_user_highpage(struct page *to, struct page *from, diff --git a/arch/arm/mm/copypage-v4wt.c b/arch/arm/mm/copypage-v4wt.c index b85c5da2e510..8614572e1296 100644 --- a/arch/arm/mm/copypage-v4wt.c +++ b/arch/arm/mm/copypage-v4wt.c @@ -20,27 +20,26 @@ * dirty data in the cache. However, we do have to ensure that * subsequent reads are up to date. */ -static void __naked -v4wt_copy_user_page(void *kto, const void *kfrom) +static void v4wt_copy_user_page(void *kto, const void *kfrom) { - asm("\ - stmfd sp!, {r4, lr} @ 2\n\ - mov r2, %2 @ 1\n\ - ldmia r1!, {r3, r4, ip, lr} @ 4\n\ -1: stmia r0!, {r3, r4, ip, lr} @ 4\n\ - ldmia r1!, {r3, r4, ip, lr} @ 4+1\n\ - stmia r0!, {r3, r4, ip, lr} @ 4\n\ - ldmia r1!, {r3, r4, ip, lr} @ 4\n\ - stmia r0!, {r3, r4, ip, lr} @ 4\n\ - ldmia r1!, {r3, r4, ip, lr} @ 4\n\ - subs r2, r2, #1 @ 1\n\ - stmia r0!, {r3, r4, ip, lr} @ 4\n\ - ldmneia r1!, {r3, r4, ip, lr} @ 4\n\ + int tmp; + + asm volatile ("\ + ldmia %1!, {r3, r4, ip, lr} @ 4\n\ +1: stmia %0!, {r3, r4, ip, lr} @ 4\n\ + ldmia %1!, {r3, r4, ip, lr} @ 4+1\n\ + stmia %0!, {r3, r4, ip, lr} @ 4\n\ + ldmia %1!, {r3, r4, ip, lr} @ 4\n\ + stmia %0!, {r3, r4, ip, lr} @ 4\n\ + ldmia %1!, {r3, r4, ip, lr} @ 4\n\ + subs %2, %2, #1 @ 1\n\ + stmia %0!, {r3, r4, ip, lr} @ 4\n\ + ldmneia %1!, {r3, r4, ip, lr} @ 4\n\ bne 1b @ 1\n\ - mcr p15, 0, r2, c7, c7, 0 @ flush ID cache\n\ - ldmfd sp!, {r4, pc} @ 3" - : - : "r" (kto), "r" (kfrom), "I" (PAGE_SIZE / 64)); + mcr p15, 0, %2, c7, c7, 0 @ flush ID cache" + : "+&r" (kto), "+&r" (kfrom), "=&r" (tmp) + : "2" (PAGE_SIZE / 64) + : "r3", "r4", "ip", "lr"); }

void v4wt_copy_user_highpage(struct page *to, struct page *from, diff --git a/arch/arm/mm/copypage-xsc3.c b/arch/arm/mm/copypage-xsc3.c index 03a2042aced5..55cbc3a89d85 100644 --- a/arch/arm/mm/copypage-xsc3.c +++ b/arch/arm/mm/copypage-xsc3.c @@ -21,53 +21,46 @@

/* * XSC3 optimised copy_user_highpage - * r0 = destination - * r1 = source * * The source page may have some clean entries in the cache already, but we * can safely ignore them - break_cow() will flush them out of the cache * if we eventually end up using our copied page. * */ -static void __naked -xsc3_mc_copy_user_page(void *kto, const void *kfrom) +static void xsc3_mc_copy_user_page(void *kto, const void *kfrom) { - asm("\ - stmfd sp!, {r4, r5, lr} \n\ - mov lr, %2 \n\ - \n\ - pld [r1, #0] \n\ - pld [r1, #32] \n\ -1: pld [r1, #64] \n\ - pld [r1, #96] \n\ + int tmp; + + asm volatile ("\ + pld [%1, #0] \n\ + pld [%1, #32] \n\ +1: pld [%1, #64] \n\ + pld [%1, #96] \n\ \n\ -2: ldrd r2, [r1], #8 \n\ - mov ip, r0 \n\ - ldrd r4, [r1], #8 \n\ - mcr p15, 0, ip, c7, c6, 1 @ invalidate\n\ - strd r2, [r0], #8 \n\ - ldrd r2, [r1], #8 \n\ - strd r4, [r0], #8 \n\ - ldrd r4, [r1], #8 \n\ - strd r2, [r0], #8 \n\ - strd r4, [r0], #8 \n\ - ldrd r2, [r1], #8 \n\ - mov ip, r0 \n\ - ldrd r4, [r1], #8 \n\ - mcr p15, 0, ip, c7, c6, 1 @ invalidate\n\ - strd r2, [r0], #8 \n\ - ldrd r2, [r1], #8 \n\ - subs lr, lr, #1 \n\ - strd r4, [r0], #8 \n\ - ldrd r4, [r1], #8 \n\ - strd r2, [r0], #8 \n\ - strd r4, [r0], #8 \n\ +2: ldrd r2, [%1], #8 \n\ + ldrd r4, [%1], #8 \n\ + mcr p15, 0, %0, c7, c6, 1 @ invalidate\n\ + strd r2, [%0], #8 \n\ + ldrd r2, [%1], #8 \n\ + strd r4, [%0], #8 \n\ + ldrd r4, [%1], #8 \n\ + strd r2, [%0], #8 \n\ + strd r4, [%0], #8 \n\ + ldrd r2, [%1], #8 \n\ + ldrd r4, [%1], #8 \n\ + mcr p15, 0, %0, c7, c6, 1 @ invalidate\n\ + strd r2, [%0], #8 \n\ + ldrd r2, [%1], #8 \n\ + subs %2, %2, #1 \n\ + strd r4, [%0], #8 \n\ + ldrd r4, [%1], #8 \n\ + strd r2, [%0], #8 \n\ + strd r4, [%0], #8 \n\ bgt 1b \n\ - beq 2b \n\ - \n\ - ldmfd sp!, {r4, r5, pc}" - : - : "r" (kto), "r" (kfrom), "I" (PAGE_SIZE / 64 - 1)); + beq 2b " + : "+&r" (kto), "+&r" (kfrom), "=&r" (tmp) + : "2" (PAGE_SIZE / 64 - 1) + : "r2", "r3", "r4", "r5"); }

void xsc3_mc_copy_user_highpage(struct page *to, struct page *from, @@ -85,8 +78,6 @@ void xsc3_mc_copy_user_highpage(struct page *to, struct page *from,

/* * XScale optimised clear_user_page - * r0 = destination - * r1 = virtual user address of ultimate destination page */ void xsc3_mc_clear_user_highpage(struct page *page, unsigned long vaddr) { diff --git a/arch/arm/mm/copypage-xscale.c b/arch/arm/mm/copypage-xscale.c index 97972379f4d6..b0ae8c7acb48 100644 --- a/arch/arm/mm/copypage-xscale.c +++ b/arch/arm/mm/copypage-xscale.c @@ -36,52 +36,51 @@ static DEFINE_RAW_SPINLOCK(minicache_lock); * Dcache aliasing issue. The writes will be forwarded to the write buffer, * and merged as appropriate. */ -static void __naked -mc_copy_user_page(void *from, void *to) +static void mc_copy_user_page(void *from, void *to) { + int tmp; + /* * Strangely enough, best performance is achieved * when prefetching destination as well. (NP) */ - asm volatile( - "stmfd sp!, {r4, r5, lr} \n\ - mov lr, %2 \n\ - pld [r0, #0] \n\ - pld [r0, #32] \n\ - pld [r1, #0] \n\ - pld [r1, #32] \n\ -1: pld [r0, #64] \n\ - pld [r0, #96] \n\ - pld [r1, #64] \n\ - pld [r1, #96] \n\ -2: ldrd r2, [r0], #8 \n\ - ldrd r4, [r0], #8 \n\ - mov ip, r1 \n\ - strd r2, [r1], #8 \n\ - ldrd r2, [r0], #8 \n\ - strd r4, [r1], #8 \n\ - ldrd r4, [r0], #8 \n\ - strd r2, [r1], #8 \n\ - strd r4, [r1], #8 \n\ + asm volatile ("\ + pld [%0, #0] \n\ + pld [%0, #32] \n\ + pld [%1, #0] \n\ + pld [%1, #32] \n\ +1: pld [%0, #64] \n\ + pld [%0, #96] \n\ + pld [%1, #64] \n\ + pld [%1, #96] \n\ +2: ldrd r2, [%0], #8 \n\ + ldrd r4, [%0], #8 \n\ + mov ip, %1 \n\ + strd r2, [%1], #8 \n\ + ldrd r2, [%0], #8 \n\ + strd r4, [%1], #8 \n\ + ldrd r4, [%0], #8 \n\ + strd r2, [%1], #8 \n\ + strd r4, [%1], #8 \n\ mcr p15, 0, ip, c7, c10, 1 @ clean D line\n\ - ldrd r2, [r0], #8 \n\ + ldrd r2, [%0], #8 \n\ mcr p15, 0, ip, c7, c6, 1 @ invalidate D line\n\ - ldrd r4, [r0], #8 \n\ - mov ip, r1 \n\ - strd r2, [r1], #8 \n\ - ldrd r2, [r0], #8 \n\ - strd r4, [r1], #8 \n\ - ldrd r4, [r0], #8 \n\ - strd r2, [r1], #8 \n\ - strd r4, [r1], #8 \n\ + ldrd r4, [%0], #8 \n\ + mov ip, %1 \n\ + strd r2, [%1], #8 \n\ + ldrd r2, [%0], #8 \n\ + strd r4, [%1], #8 \n\ + ldrd r4, [%0], #8 \n\ + strd r2, [%1], #8 \n\ + strd r4, [%1], #8 \n\ mcr p15, 0, ip, c7, c10, 1 @ clean D line\n\ - subs lr, lr, #1 \n\ + subs %2, %2, #1 \n\ mcr p15, 0, ip, c7, c6, 1 @ invalidate D line\n\ bgt 1b \n\ - beq 2b \n\ - ldmfd sp!, {r4, r5, pc} " - : - : "r" (from), "r" (to), "I" (PAGE_SIZE / 64 - 1)); + beq 2b " + : "+&r" (from), "+&r" (to), "=&r" (tmp) + : "2" (PAGE_SIZE / 64 - 1) + : "r2", "r3", "r4", "r5", "ip"); }

void xscale_mc_copy_user_highpage(struct page *to, struct page *from,

From: Stefan Agner stefan@agner.ch

commit d3c61619568c88d48eccd5e74b4f84faa1440652 upstream.

Commit cafa0010cd51 ("Raise the minimum required gcc version to 4.6") raised the minimum GCC version to 4.6. Old mcount is only required for GCC versions older than 4.4.0. Hence old mcount support can be dropped too.

Signed-off-by: Stefan Agner stefan@agner.ch Signed-off-by: Russell King rmk+kernel@armlinux.org.uk Signed-off-by: Anders Roxell anders.roxell@linaro.org --- arch/arm/Kconfig.debug | 5 --- arch/arm/include/asm/ftrace.h | 3 -- arch/arm/kernel/armksyms.c | 3 -- arch/arm/kernel/entry-ftrace.S | 75 ++-------------------------------- arch/arm/kernel/ftrace.c | 51 ----------------------- 5 files changed, 4 insertions(+), 133 deletions(-)

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 01c760929c9e..9d363399cb35 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -82,11 +82,6 @@ config ARM_UNWIND config FRAME_POINTER bool

-config OLD_MCOUNT - bool - depends on FUNCTION_TRACER && FRAME_POINTER - default y - config DEBUG_USER bool "Verbose user fault messages" help diff --git a/arch/arm/include/asm/ftrace.h b/arch/arm/include/asm/ftrace.h index faeb6b1c0089..15bd9af13497 100644 --- a/arch/arm/include/asm/ftrace.h +++ b/arch/arm/include/asm/ftrace.h @@ -16,9 +16,6 @@ extern void __gnu_mcount_nc(void);

#ifdef CONFIG_DYNAMIC_FTRACE struct dyn_arch_ftrace { -#ifdef CONFIG_OLD_MCOUNT - bool old_mcount; -#endif #ifdef CONFIG_ARM_MODULE_PLTS struct module *mod; #endif diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c index 783fbb4de5f9..8fa2dc21d332 100644 --- a/arch/arm/kernel/armksyms.c +++ b/arch/arm/kernel/armksyms.c @@ -167,9 +167,6 @@ EXPORT_SYMBOL(_find_next_bit_be); #endif

#ifdef CONFIG_FUNCTION_TRACER -#ifdef CONFIG_OLD_MCOUNT -EXPORT_SYMBOL(mcount); -#endif EXPORT_SYMBOL(__gnu_mcount_nc); #endif

diff --git a/arch/arm/kernel/entry-ftrace.S b/arch/arm/kernel/entry-ftrace.S index efcd9f25a14b..0be69e551a64 100644 --- a/arch/arm/kernel/entry-ftrace.S +++ b/arch/arm/kernel/entry-ftrace.S @@ -15,23 +15,8 @@ * start of every function. In mcount, apart from the function's address (in * lr), we need to get hold of the function's caller's address. * - * Older GCCs (pre-4.4) inserted a call to a routine called mcount like this: - * - * bl mcount - * - * These versions have the limitation that in order for the mcount routine to - * be able to determine the function's caller's address, an APCS-style frame - * pointer (which is set up with something like the code below) is required. - * - * mov ip, sp - * push {fp, ip, lr, pc} - * sub fp, ip, #4 - * - * With EABI, these frame pointers are not available unless -mapcs-frame is - * specified, and if building as Thumb-2, not even then. - * - * Newer GCCs (4.4+) solve this problem by introducing a new version of mcount, - * with call sites like: + * Newer GCCs (4.4+) solve this problem by using a version of mcount with call + * sites like: * * push {lr} * bl __gnu_mcount_nc @@ -46,17 +31,10 @@ * allows it to be clobbered in subroutines and doesn't use it to hold * parameters.) * - * When using dynamic ftrace, we patch out the mcount call by a "mov r0, r0" - * for the mcount case, and a "pop {lr}" for the __gnu_mcount_nc case (see - * arch/arm/kernel/ftrace.c). + * When using dynamic ftrace, we patch out the mcount call by a "pop {lr}" + * instead of the __gnu_mcount_nc call (see arch/arm/kernel/ftrace.c). */

-#ifndef CONFIG_OLD_MCOUNT -#if (__GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 4)) -#error Ftrace requires CONFIG_FRAME_POINTER=y with GCC older than 4.4.0. -#endif -#endif - .macro mcount_adjust_addr rd, rn bic \rd, \rn, #1 @ clear the Thumb bit if present sub \rd, \rd, #MCOUNT_INSN_SIZE @@ -209,51 +187,6 @@ ftrace_graph_call\suffix: mcount_exit .endm

-#ifdef CONFIG_OLD_MCOUNT -/* - * mcount - */ - -.macro mcount_enter - stmdb sp!, {r0-r3, lr} -.endm - -.macro mcount_get_lr reg - ldr \reg, [fp, #-4] -.endm - -.macro mcount_exit - ldr lr, [fp, #-4] - ldmia sp!, {r0-r3, pc} -.endm - -ENTRY(mcount) -#ifdef CONFIG_DYNAMIC_FTRACE - stmdb sp!, {lr} - ldr lr, [fp, #-4] - ldmia sp!, {pc} -#else - __mcount _old -#endif -ENDPROC(mcount) - -#ifdef CONFIG_DYNAMIC_FTRACE -ENTRY(ftrace_caller_old) - __ftrace_caller _old -ENDPROC(ftrace_caller_old) -#endif - -#ifdef CONFIG_FUNCTION_GRAPH_TRACER -ENTRY(ftrace_graph_caller_old) - __ftrace_graph_caller -ENDPROC(ftrace_graph_caller_old) -#endif - -.purgem mcount_enter -.purgem mcount_get_lr -.purgem mcount_exit -#endif - /* * __gnu_mcount_nc */ diff --git a/arch/arm/kernel/ftrace.c b/arch/arm/kernel/ftrace.c index 51839250e49a..12b6da56f88d 100644 --- a/arch/arm/kernel/ftrace.c +++ b/arch/arm/kernel/ftrace.c @@ -47,30 +47,6 @@ void arch_ftrace_update_code(int command) stop_machine(__ftrace_modify_code, &command, NULL); }

-#ifdef CONFIG_OLD_MCOUNT -#define OLD_MCOUNT_ADDR ((unsigned long) mcount) -#define OLD_FTRACE_ADDR ((unsigned long) ftrace_caller_old) - -#define OLD_NOP 0xe1a00000 /* mov r0, r0 */ - -static unsigned long ftrace_nop_replace(struct dyn_ftrace *rec) -{ - return rec->arch.old_mcount ? OLD_NOP : NOP; -} - -static unsigned long adjust_address(struct dyn_ftrace *rec, unsigned long addr) -{ - if (!rec->arch.old_mcount) - return addr; - - if (addr == MCOUNT_ADDR) - addr = OLD_MCOUNT_ADDR; - else if (addr == FTRACE_ADDR) - addr = OLD_FTRACE_ADDR; - - return addr; -} -#else static unsigned long ftrace_nop_replace(struct dyn_ftrace *rec) { return NOP; @@ -80,7 +56,6 @@ static unsigned long adjust_address(struct dyn_ftrace *rec, unsigned long addr) { return addr; } -#endif

int ftrace_arch_code_modify_prepare(void) { @@ -151,15 +126,6 @@ int ftrace_update_ftrace_func(ftrace_func_t func) } #endif

-#ifdef CONFIG_OLD_MCOUNT - if (!ret) { - pc = (unsigned long)&ftrace_call_old; - new = ftrace_call_replace(pc, (unsigned long)func, true); - - ret = ftrace_modify_code(pc, 0, new, false); - } -#endif - return ret; }

@@ -233,16 +199,6 @@ int ftrace_make_nop(struct module *mod, new = ftrace_nop_replace(rec); ret = ftrace_modify_code(ip, old, new, true);

-#ifdef CONFIG_OLD_MCOUNT - if (ret == -EINVAL && addr == MCOUNT_ADDR) { - rec->arch.old_mcount = true; - - old = ftrace_call_replace(ip, adjust_address(rec, addr), true); - new = ftrace_nop_replace(rec); - ret = ftrace_modify_code(ip, old, new, true); - } -#endif - return ret; }

@@ -305,13 +261,6 @@ static int ftrace_modify_graph_caller(bool enable) #endif

-#ifdef CONFIG_OLD_MCOUNT - if (!ret) - ret = __ftrace_modify_caller(&ftrace_graph_call_old, - ftrace_graph_caller_old, - enable); -#endif - return ret; }

From: Nathan Chancellor nathan@kernel.org

commit a02dcde595f7cbd240ccd64de96034ad91cffc40 upstream.

A new warning in clang points out a few places in this driver where a bitwise OR is being used with boolean types:

drivers/input/touchscreen.c:81:17: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical] data_present = touchscreen_get_prop_u32(dev, "touchscreen-min-x", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

This use of a bitwise OR is intentional, as bitwise operations do not short circuit, which allows all the calls to touchscreen_get_prop_u32() to happen so that the last parameter is initialized while coalescing the results of the calls to make a decision after they are all evaluated.

To make this clearer to the compiler, use the '|=' operator to assign the result of each touchscreen_get_prop_u32() call to data_present, which keeps the meaning of the code the same but makes it obvious that every one of these calls is expected to happen.

Signed-off-by: Nathan Chancellor nathan@kernel.org Reported-by: Nick Desaulniers ndesaulniers@google.com Reviewed-by: Nick Desaulniers ndesaulniers@google.com Link: https://lore.kernel.org/r/20211014205757.3474635-1-nathan@kernel.org Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Anders Roxell anders.roxell@linaro.org --- drivers/input/touchscreen/of_touchscreen.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/input/touchscreen/of_touchscreen.c b/drivers/input/touchscreen/of_touchscreen.c index 9642f103b726..b9baad7d34a7 100644 --- a/drivers/input/touchscreen/of_touchscreen.c +++ b/drivers/input/touchscreen/of_touchscreen.c @@ -80,8 +80,8 @@ void touchscreen_parse_properties(struct input_dev *input, bool multitouch, data_present = touchscreen_get_prop_u32(dev, "touchscreen-size-x", input_abs_get_max(input, axis) + 1, - &maximum) | - touchscreen_get_prop_u32(dev, "touchscreen-fuzz-x", + &maximum); + data_present |= touchscreen_get_prop_u32(dev, "touchscreen-fuzz-x", input_abs_get_fuzz(input, axis), &fuzz); if (data_present) @@ -91,8 +91,8 @@ void touchscreen_parse_properties(struct input_dev *input, bool multitouch, data_present = touchscreen_get_prop_u32(dev, "touchscreen-size-y", input_abs_get_max(input, axis) + 1, - &maximum) | - touchscreen_get_prop_u32(dev, "touchscreen-fuzz-y", + &maximum); + data_present |= touchscreen_get_prop_u32(dev, "touchscreen-fuzz-y", input_abs_get_fuzz(input, axis), &fuzz); if (data_present) @@ -102,11 +102,11 @@ void touchscreen_parse_properties(struct input_dev *input, bool multitouch, data_present = touchscreen_get_prop_u32(dev, "touchscreen-max-pressure", input_abs_get_max(input, axis), - &maximum) | - touchscreen_get_prop_u32(dev, - "touchscreen-fuzz-pressure", - input_abs_get_fuzz(input, axis), - &fuzz); + &maximum); + data_present |= touchscreen_get_prop_u32(dev, + "touchscreen-fuzz-pressure", + input_abs_get_fuzz(input, axis), + &fuzz); if (data_present) touchscreen_set_params(input, axis, maximum, fuzz);