Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.0.11-rc1 (tuxmake@tuxmake) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP @1669834074 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: TI AM5728 BeagleBoard-X15 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x95800000, size 56 MiB [ 0.000000] OF: reserved mem: initialized node ipu2-memory@95800000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x99000000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node dsp1-memory@99000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x9d000000, size 32 MiB [ 0.000000] OF: reserved mem: initialized node ipu1-memory@9d000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x9f000000, size 8 MiB [ 0.000000] OF: reserved mem: initialized node dsp2-memory@9f000000, compatible id shared-dma-pool [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] OMAP4: Map 0xafe00000 to (ptrval) for dram barrier [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000afdfffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x00000000afe00000-0x00000000ffffefff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000afdfffff] [ 0.000000] node 0: [mem 0x00000000b0000000-0x00000000ffffefff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffefff] [ 0.000000] On node 0, zone HighMem: 512 pages in unavailable ranges [ 0.000000] DRA752 ES2.0 [ 0.000000] percpu: Embedded 16 pages/cpu s35156 r8192 d22188 u65536 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522051 [ 0.000000] Kernel command line: console=ttyS2,115200n8 root=PARTUUID=21674ce0-3b3d-d74e-a1fb-cb0f72855b64 rw rootfstype=ext4 rootwait [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1812560K/2095100K available (17408K kernel code, 2688K rwdata, 8948K rodata, 2048K init, 505K bss, 53164K reserved, 229376K cma-reserved, 1245180K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] ftrace: allocating 60953 entries in 179 pages [ 0.000000] ftrace: allocated 179 pages with 5 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000000] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000000] sched_clock: 32 bits at 33kHz, resolution 30517ns, wraps every 65535999984741ns [ 0.002593] TI gptimer clockevent: always-on 32786 Hz at /ocp/interconnect@4ae00000/segment@10000/target-module@8000 [ 0.007171] TI gptimer percpu-dmtimer: 20000000 Hz at /ocp/interconnect@48800000/segment@0/target-module@2c000 [ 0.007385] TI gptimer percpu-dmtimer: 20000000 Hz at /ocp/interconnect@48800000/segment@0/target-module@2e000 [ 0.010711] Console: colour dummy device 80x30 [ 0.010742] Calibrating delay loop... 1993.93 BogoMIPS (lpj=9969664) [ 0.063232] pid_max: default: 32768 minimum: 301 [ 0.063385] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.063415] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.063995] CPU: Testing write buffer coherency: ok [ 0.064025] CPU0: Spectre v2: using ICIALLU workaround [ 0.064056] CPU0: Spectre BHB: enabling loop workaround for all CPUs [ 0.064270] /cpus/cpu@0 missing clock-frequency property [ 0.064300] /cpus/cpu@1 missing clock-frequency property [ 0.064331] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.065093] cblist_init_generic: Setting adjustable number of callback queues. [ 0.065093] cblist_init_generic: Setting shift to 1 and lim to 1. [ 0.065185] Setting up static identity map for 0x80300000 - 0x803000ac [ 0.068511] rcu: Hierarchical SRCU implementation. [ 0.068511] rcu: Max phase no-delay instances is 1000. [ 0.077545] EFI services will not be available. [ 0.078155] smp: Bringing up secondary CPUs ... [ 0.138305] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.138336] CPU1: Spectre v2: using ICIALLU workaround [ 0.138458] smp: Brought up 1 node, 2 CPUs [ 0.138458] SMP: Total of 2 processors activated (3994.41 BogoMIPS). [ 0.138488] CPU: All CPU(s) started in HYP mode. [ 0.138488] CPU: Virtualization extensions available. [ 0.138946] devtmpfs: initialized [ 0.160430] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.160583] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.160614] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.164062] pinctrl core: initialized pinctrl subsystem [ 0.169921] DMI not present or invalid. [ 0.170410] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.172851] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.176788] thermal_sys: Registered thermal governor 'step_wise' [ 0.177856] cpuidle: using governor menu [ 0.219360] platform encoder: Fixing up cyclic dependency with connector [ 0.219940] No ATAGs? [ 0.220031] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.220031] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.227783] Serial: AMBA PL011 UART driver [ 0.240203] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.249786] cryptd: max_cpu_qlen set to 1000 [ 0.256072] iommu: Default domain type: Translated [ 0.256072] iommu: DMA domain TLB invalidation policy: strict mode [ 0.256622] SCSI subsystem initialized [ 0.257019] usbcore: registered new interface driver usbfs [ 0.257049] usbcore: registered new interface driver hub [ 0.257080] usbcore: registered new device driver usb [ 0.258148] mc: Linux media interface: v0.10 [ 0.258178] videodev: Linux video capture interface: v2.00 [ 0.258239] pps_core: LinuxPPS API ver. 1 registered [ 0.258270] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.258270] PTP clock support registered [ 0.258422] EDAC MC: Ver: 3.0.0 [ 1.034301] vgaarb: loaded [ 1.034576] clocksource: Switched to clocksource 32k_counter [ 1.091918] NET: Registered PF_INET protocol family [ 1.092132] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.093261] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 1.093292] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.093322] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.093383] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.093505] TCP: Hash tables configured (established 8192 bind 8192) [ 1.093627] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) [ 1.093658] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.093688] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.093841] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.094360] RPC: Registered named UNIX socket transport module. [ 1.094360] RPC: Registered udp transport module. [ 1.094360] RPC: Registered tcp transport module. [ 1.094390] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.094390] PCI: CLS 0 bytes, default 64 [ 1.094879] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. [ 1.095092] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 1.096038] Initialise system trusted keyrings [ 1.096252] workingset: timestamp_bits=14 max_order=19 bucket_order=5 [ 1.102630] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.103332] NFS: Registering the id_resolver key type [ 1.103363] Key type id_resolver registered [ 1.103393] Key type id_legacy registered [ 1.103454] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.103454] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.103485] ntfs: driver 2.1.32 [Flags: R/O]. [ 1.104888] jitterentropy: Initialization failed with host not compliant with requirements: 2 [ 1.104888] NET: Registered PF_ALG protocol family [ 1.104919] Key type asymmetric registered [ 1.104919] Asymmetric key parser 'x509' registered [ 1.105072] bounce: pool size: 64 pages [ 1.105163] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 1.105163] io scheduler mq-deadline registered [ 1.105163] io scheduler kyber registered [ 1.188262] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled [ 1.191528] SuperH (H)SCI(F) driver initialized [ 1.192230] msm_serial: driver initialized [ 1.192230] STMicroelectronics ASC driver initialized [ 1.193847] STM32 USART driver initialized [ 1.206268] brd: module loaded [ 1.210998] loop: module loaded [ 1.221221] CAN device driver interface [ 1.222045] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 1.222839] e1000e: Intel(R) PRO/1000 Network Driver [ 1.222839] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.222869] igb: Intel(R) Gigabit Ethernet Network Driver [ 1.222900] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.223358] QLogic FastLinQ 4xxxx Core Module qed [ 1.223358] qede init: QLogic FastLinQ 4xxxx Ethernet Driver qede [ 1.226135] pegasus: Pegasus/Pegasus II USB Ethernet driver [ 1.226165] usbcore: registered new interface driver pegasus [ 1.226196] usbcore: registered new interface driver asix [ 1.226226] usbcore: registered new interface driver ax88179_178a [ 1.226257] usbcore: registered new interface driver cdc_ether [ 1.226287] usbcore: registered new interface driver smsc75xx [ 1.226348] usbcore: registered new interface driver smsc95xx [ 1.226379] usbcore: registered new interface driver net1080 [ 1.226409] usbcore: registered new interface driver cdc_subset [ 1.226440] usbcore: registered new interface driver zaurus [ 1.226501] usbcore: registered new interface driver cdc_ncm [ 1.228302] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.228302] ehci-pci: EHCI PCI platform driver [ 1.228332] ehci-platform: EHCI generic platform driver [ 1.228485] ehci-omap: OMAP-EHCI Host Controller driver [ 1.228576] ehci-orion: EHCI orion driver [ 1.228698] SPEAr-ehci: EHCI SPEAr driver [ 1.228820] ehci-st: EHCI STMicroelectronics driver [ 1.228912] ehci-atmel: EHCI Atmel driver [ 1.229034] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.229034] ohci-pci: OHCI PCI platform driver [ 1.229064] ohci-platform: OHCI generic platform driver [ 1.229187] SPEAr-ohci: OHCI SPEAr driver [ 1.229309] ohci-st: OHCI STMicroelectronics driver [ 1.229400] ohci-atmel: OHCI Atmel driver [ 1.229797] usbcore: registered new interface driver usb-storage [ 1.233703] i2c_dev: i2c /dev entries driver [ 1.245147] cpu cpu0: Failed to set OPP config [ 1.246704] sdhci: Secure Digital Host Controller Interface driver [ 1.246734] sdhci: Copyright(c) Pierre Ossman [ 1.248138] Synopsys Designware Multimedia Card Interface Driver [ 1.249420] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.251770] ledtrig-cpu: registered to indicate activity on CPUs [ 1.255645] usbcore: registered new interface driver usbhid [ 1.255645] usbhid: USB HID core driver [ 1.258544] cs_system_cfg: CoreSight Configuration manager initialised [ 1.262573] NET: Registered PF_INET6 protocol family [ 1.263549] Segment Routing with IPv6 [ 1.263580] In-situ OAM (IOAM) with IPv6 [ 1.263641] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.264129] NET: Registered PF_PACKET protocol family [ 1.264129] can: controller area network core [ 1.264190] NET: Registered PF_CAN protocol family [ 1.264190] can: raw protocol [ 1.264221] can: broadcast manager protocol [ 1.264221] can: netlink gateway - max_hops=1 [ 1.264495] Key type dns_resolver registered [ 1.264556] ThumbEE CPU extension supported. [ 1.264617] Registering SWP/SWPB emulation handler [ 1.264984] omap_voltage_late_init: Voltage driver support not added [ 1.265014] Power Management for TI OMAP4+ devices. [ 1.265869] registered taskstats version 1 [ 1.265869] Loading compiled-in X.509 certificates [ 1.331085] pinctrl-single 4a003400.pinmux: 282 pins, size 1128 [ 1.391998] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported) [ 1.411712] ahci 4a140000.sata: supply ahci not found, using dummy regulator [ 1.411804] ahci 4a140000.sata: supply phy not found, using dummy regulator [ 1.411926] ahci 4a140000.sata: supply target not found, using dummy regulator [ 1.412292] ahci 4a140000.sata: forcing port_map 0x0 -> 0x1 [ 1.412322] ahci 4a140000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.412322] ahci 4a140000.sata: flags: 64bit ncq sntf pm led clo only pmp pio slum part ccc apst [ 1.413635] scsi host0: ahci [ 1.413879] ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a1410ff] port 0x100 irq 98 [ 1.428741] gpio gpiochip0: (gpio-0-31): not an immutable chip, please consider fixing it! [ 1.429138] OMAP GPIO hardware version 0.1 [ 1.434173] ti-sysc: probe of 4ae18000.target-module failed with error -16 [ 1.449310] printk: console [ttyS2] disabled [ 1.449401] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 101, base_baud = 3000000) is a 8250 [ 1.746398] ata1: SATA link down (SStatus 0 SControl 300) [ 2.787048] printk: console [ttyS2] enabled [ 2.806579] gpio gpiochip1: (gpio-32-63): not an immutable chip, please consider fixing it! [ 2.817199] gpio gpiochip2: (gpio-64-95): not an immutable chip, please consider fixing it! [ 2.827697] gpio gpiochip3: (gpio-96-127): not an immutable chip, please consider fixing it! [ 2.838256] gpio gpiochip4: (gpio-128-159): not an immutable chip, please consider fixing it! [ 2.848907] gpio gpiochip5: (gpio-160-191): not an immutable chip, please consider fixing it! [ 2.859527] gpio gpiochip6: (gpio-192-223): not an immutable chip, please consider fixing it! [ 2.870239] gpio gpiochip7: (gpio-224-255): not an immutable chip, please consider fixing it! [ 2.882171] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.897308] palmas 0-0058: Irq flag is 0x00000008 [ 2.928894] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 2.977050] at24 0-0050: supply vcc not found, using dummy regulator [ 2.983856] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.990753] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 3.010711] omap_rng 48090000.rng: Random Number Generator ver. 20 [ 3.010955] random: crng init done [ 3.025238] omap_gpio 4805d000.gpio: Could not set line 27 debounce to 200000 microseconds (-22) [ 3.034057] sdhci-omap 4809c000.mmc: Got CD GPIO [ 3.039031] sdhci-omap 4809c000.mmc: supply vqmmc not found, using dummy regulator [ 3.070953] sdhci-omap 4809c000.mmc: no pinctrl state for ddr_3_3v mode [ 3.104827] mmc0: SDHCI controller on 4809c000.mmc [4809c000.mmc] using ADMA [ 3.124603] davinci_mdio 48485000.mdio: davinci mdio revision 1.6, bus freq 1000000 [ 3.135528] davinci_mdio 48485000.mdio: phy[1]: device 48485000.mdio:01, driver Micrel KSZ9031 Gigabit PHY [ 3.145263] davinci_mdio 48485000.mdio: phy[2]: device 48485000.mdio:02, driver Micrel KSZ9031 Gigabit PHY [ 3.155578] cpsw-switch 48484000.switch: initialized cpsw ale version 1.4 [ 3.162414] cpsw-switch 48484000.switch: ALE Table size 1024 [ 3.168182] cpsw-switch 48484000.switch: cpts: overflow check period 500 (jiffies) [ 3.175842] cpsw-switch 48484000.switch: CPTS: ref_clk_freq:266000000 calc_mult:4036623398 calc_shift:30 error:-1 nsec/sec [ 3.187011] cpsw-switch 48484000.switch: Detected MACID = f8:30:02:cf:6e:e6 [ 3.194030] cpsw-switch 48484000.switch: Detected MACID = f8:30:02:cf:6e:e7 [ 3.202789] cpsw-switch 48484000.switch: initialized (regs 0x48484000, pool size 256) hw_ver:0019010F 1.15 (0) [ 3.237701] ti-sysc: probe of 4882c000.target-module failed with error -16 [ 3.247070] ti-sysc: probe of 4882e000.target-module failed with error -16 [ 3.290252] dra7-pcie 51000000.pcie: host bridge /ocp/target-module@51000000/pcie@51000000 ranges: [ 3.299346] dra7-pcie 51000000.pcie: IO 0x0020003000..0x0020012fff -> 0x0000000000 [ 3.307556] dra7-pcie 51000000.pcie: MEM 0x0020013000..0x002fffffff -> 0x0020013000 [ 3.315795] dra7-pcie 51000000.pcie: iATU unroll: disabled [ 3.321319] dra7-pcie 51000000.pcie: iATU regions: 16 ob, 4 ib, align 4K, limit 4G [ 4.329772] dra7-pcie 51000000.pcie: Phy link never came up [ 4.335540] dra7-pcie 51000000.pcie: PCI host bridge to bus 0000:00 [ 4.341857] pci_bus 0000:00: root bus resource [bus 00-ff] [ 4.347412] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 4.353607] pci_bus 0000:00: root bus resource [mem 0x20013000-0x2fffffff] [ 4.360565] pci 0000:00:00.0: [104c:8888] type 01 class 0x060400 [ 4.366638] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x000fffff] [ 4.372955] pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x0000ffff] [ 4.379364] pci 0000:00:00.0: supports D1 [ 4.383392] pci 0000:00:00.0: PME# supported from D0 D1 D3hot [ 4.396392] PCI: bus0: Fast back to back transfers disabled [ 4.402313] PCI: bus1: Fast back to back transfers enabled [ 4.407867] pci 0000:00:00.0: BAR 0: assigned [mem 0x20100000-0x201fffff] [ 4.414703] pci 0000:00:00.0: BAR 1: assigned [mem 0x20020000-0x2002ffff] [ 4.421539] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 4.427215] pcieport 0000:00:00.0: PME: Signaling with IRQ 135 [ 4.442047] edma 43300000.dma: memcpy is disabled [ 4.449768] edma 43300000.dma: TI EDMA DMA engine driver [ 4.484130] ti_abb 4ae07e30.regulator-abb-dspeve: can't request region for resource [mem 0x4ae06010-0x4ae06013] [ 4.494293] ti_abb: probe of 4ae07e30.regulator-abb-dspeve failed with error -16 [ 4.503906] ti_abb 4ae07de4.regulator-abb-gpu: can't request region for resource [mem 0x4ae06010-0x4ae06013] [ 4.513824] ti_abb: probe of 4ae07de4.regulator-abb-gpu failed with error -16 [ 4.547515] ti_opp_supply: probe of 4a003b20.opp-supply failed with error 1 [ 4.606109] rtc-ds1307 2-006f: registered as rtc0 [ 4.611145] rtc-ds1307 2-006f: hctosys: unable to read the hardware clock [ 4.622070] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: registered as rtc1 [ 4.635375] sdhci-omap 480b4000.mmc: supply pbias not found, using dummy regulator [ 4.644439] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 4.649993] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1 [ 4.658325] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010 [ 4.667816] xhci-hcd xhci-hcd.1.auto: irq 142, io mem 0x48890000 [ 4.673980] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 4.679504] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2 [ 4.683502] mmc1: SDHCI controller on 480b4000.mmc [480b4000.mmc] using ADMA [ 4.687225] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed [ 4.701568] hub 1-0:1.0: USB hub found [ 4.705383] hub 1-0:1.0: 1 port detected [ 4.709716] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.718475] hub 2-0:1.0: USB hub found [ 4.722381] hub 2-0:1.0: 1 port detected [ 4.732055] Waiting for root device PARTUUID=21674ce0-3b3d-d74e-a1fb-cb0f72855b64... [ 4.771789] mmc1: new DDR MMC card at address 0001 [ 4.777160] mmcblk1: mmc1:0001 M62704 3.53 GiB [ 4.786254] mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 [ 4.794189] mmcblk1boot0: mmc1:0001 M62704 2.00 MiB [ 4.800140] mmcblk1boot1: mmc1:0001 M62704 2.00 MiB [ 4.806060] mmcblk1rpmb: mmc1:0001 M62704 512 KiB, chardev (235:0) [ 5.034576] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 5.080200] EXT4-fs (mmcblk1p12): mounted filesystem with ordered data mode. Quota mode: disabled. [ 5.093444] VFS: Mounted root (ext4 filesystem) on device 179:12. [ 5.100830] devtmpfs: mounted [ 5.114898] Freeing unused kernel image (initmem) memory: 2048K [ 5.121093] Run /sbin/init as init process [ 5.241271] systemd[1]: System time before build time, advancing clock. [ 5.260406] systemd[1]: systemd 250.5+ running in system mode (-PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [ 5.277526] hub 1-1:1.0: USB hub found [ 5.292297] systemd[1]: Detected architecture arm. [ 5.295684] hub 1-1:1.0: 4 ports detected [ 5.374694] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd Welcome to Linux-Kernel-Functional-Testing nodistro.0! [ 5.415313] systemd[1]: Hostname set to . [ 5.424713] systemd[1]: Initializing machine ID from random generator. [ 5.453491] hub 2-1:1.0: USB hub found [ 5.457489] hub 2-1:1.0: 4 ports detected [ 5.744598] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5.754943] ata1.00: ATA-9: SanDisk SSD PLUS 120GB, UE5000RL, max UDMA/133 [ 5.761871] ata1.00: 234455040 sectors, multi 1: LBA48 NCQ (depth 32) [ 5.769134] ata1.00: Features: Dev-Sleep [ 5.778015] ata1.00: configured for UDMA/133 [ 5.782501] scsi 0:0:0:0: Direct-Access ATA SanDisk SSD PLUS 00RL PQ: 0 ANSI: 5 [ 5.791534] sd 0:0:0:0: [sda] 234455040 512-byte logical blocks: (120 GB/112 GiB) [ 5.804595] sd 0:0:0:0: [sda] Write Protect is off [ 5.809478] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.818695] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 5.826110] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.182128] systemd[1]: Queued start job for default target Multi-User System. [ 6.263397] systemd[1]: Created slice Slice /system/getty. [ OK ] Created slice Slice /system/getty. [ 6.306396] systemd[1]: Created slice Slice /system/modprobe. [ OK ] Created slice Slice /system/modprobe. [ 6.346130] systemd[1]: Created slice Slice /system/serial-getty. [ OK ] Created slice Slice /system/serial-getty. [ 6.385833] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 6.425415] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password …ts to Console Directory Watch. [ 6.464904] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password R…uests to Wall Directory Watch. [ 6.505645] systemd[1]: Reached target Path Units. [ OK ] Reached target Path Units. [ 6.544769] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 6.585113] systemd[1]: Reached target Slice Units. [ OK ] Reached target Slice Units. [ 6.624786] systemd[1]: Reached target Swaps. [ OK ] Reached target Swaps. [ 6.656433] systemd[1]: Listening on RPCbind Server Activation Socket. [ OK ] Listening on RPCbind Server Activation Socket. [ 6.694763] systemd[1]: Reached target RPC Port Mapper. [ OK ] Reached target RPC Port Mapper. [ 6.736267] systemd[1]: Listening on Syslog Socket. [ OK ] Listening on Syslog Socket. [ 6.774932] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 6.836822] systemd[1]: Journal Audit Socket was skipped because of a failed condition check (ConditionSecurity=audit). [ 6.848266] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 6.885162] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 6.926025] systemd[1]: Listening on Network Service Netlink Socket. [ OK ] Listening on Network Service Netlink Socket. [ 6.965209] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 7.005126] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 7.045745] systemd[1]: Listening on User Database Manager Socket. [ OK ] Listening on User Database Manager Socket. [ 7.085815] systemd[1]: Huge Pages File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/mm/hugepages). [ 7.145019] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 7.188415] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 7.228271] systemd[1]: Mounting Kernel Trace File System... Mounting Kernel Trace File System... [ 7.315032] systemd[1]: Mounting Temporary Directory /tmp... Mounting Temporary Directory /tmp... [ 7.348327] systemd[1]: Starting Create List of Static Device Nodes... Starting Create List of Static Device Nodes... [ 7.389221] systemd[1]: Starting Load Kernel Module configfs... Starting Load Kernel Module configfs... [ 7.439117] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm... [ 7.525238] systemd[1]: Starting Load Kernel Module fuse... Starting Load Kernel Module fuse... [ 7.557830] systemd[1]: Starting Start psplash boot splash screen... Starting Start psplash boot splash screen... [ 7.598632] systemd[1]: Starting RPC Bind... Starting RPC Bind... [ 7.634887] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/). [ 7.648071] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 7.661041] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 7.705169] systemd[1]: Starting Journal Service... Starting Journal Service... [ 7.739410] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 7.777160] systemd[1]: Starting Generate network units from Kernel command line... Starting Generate network …ts from Kernel command line... [ 7.856719] systemd[1]: Starting Remount Root and Kernel File Systems... Starting Remount Root and Kernel File Systems[ 7.879089] EXT4-fs (mmcblk1p12): re-mounted. Quota mode: disabled. ... [ 7.918670] systemd[1]: Starting Coldplug All udev Devices... Starting Coldplug All udev Devices... [ 7.970916] systemd[1]: Started RPC Bind. [ OK ] Started RPC Bind. [ 8.015502] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Kernel Debug File System. [ OK ] Mounted Kernel Trace File System. [ OK ] Mounted Temporary Directory /tmp. [ OK ] Finished Create List of Static Device Nodes. [ OK ] Finished Load Kernel Module configfs. [ OK ] Finished Load Kernel Module drm. [ OK ] Finished Load Kernel Module fuse. [FAILED] Failed to start Start psplash boot splash screen. See 'systemctl status psplash-start.service' for details. [DEPEND] Dependency failed for Star…progress communication helper. [ OK ] Finished Load Kernel Modules. [ OK ] Finished Generate network units from Kernel command line. [ OK ] Finished Remount Root and Kernel File Systems. Mounting Kernel Configuration File System... Starting Flush Journal to Persistent Storage... [ 8.640930] systemd-journald[235]: Received client request to flush runtime journal. Starting Apply Kernel Variables... Starting Create System Users... [ OK ] Mounted Kernel Configuration File System. [ OK ] Finished Flush Journal to Persistent Storage. [ OK ] Finished Apply Kernel Variables. [ OK ] Finished Create System Users. Starting Create Static Device Nodes in /dev... [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Reached target Preparation for Local File Systems. Mounting /var/volatile... Starting Rule-based Manage…for Device Events and Files... [ OK ] Mounted /var/volatile. Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems. Starting Rebuild Dynamic Linker Cache... Starting Create Volatile Files and Directories... [ OK ] Started Rule-based Manager for Device Events and Files. [ OK ] Finished Coldplug All udev Devices. [ OK ] Finished Load/Save Random Seed. [ OK ] Finished Create Volatile Files and Directories. Starting Rebuild Journal Catalog... Starting Network Time Synchronization... Starting Wait for udev To …plete Device Initialization... Starting Record System Boot/Shutdown in UTMP... [ OK ] Finished Rebuild Dynamic Linker Cache. [ OK ] Finished Rebuild Journal Catalog. [ OK ] Started Network Time Synchronization. [ OK ] Finished Record System Boot/Shutdown in UTMP. [ OK ] Reached target System Time Set. Starting Update is Completed... [ OK ] Finished Update is Completed. [ 11.174957] usbcore: registered new device driver onboard-usb-hub [ 11.477539] etnaviv etnaviv: bound 59000000.gpu (ops gpu_ops [etnaviv]) [ 11.484313] etnaviv-gpu 59000000.gpu: model: GC320, revision: 5301 [ 11.505157] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 0 [ 11.617126] hub 1-1:1.0: USB hub found [ 11.622070] hub 1-1:1.0: 4 ports detected [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch. [ 11.777160] hub 1-1:1.0: USB hub found [ 11.780975] hub 1-1:1.0: 4 ports detected [ 12.033996] hub 2-1:1.0: USB hub found [ 12.037841] hub 2-1:1.0: 4 ports detected [ 12.113342] hub 2-1:1.0: USB hub found [ 12.117187] hub 2-1:1.0: 4 ports detected [ OK ] Finished Wait for udev To Complete Device Initialization. [ OK ] Started Hardware RNG Entropy Gatherer Daemon. [ OK ] Reached target System Initialization. [ OK ] Started Daily rotation of log files. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timer Units. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. Starting sshd.socket... [ OK ] Listening on sshd.socket. [ OK ] Reached target Socket Units. [ OK ] Reached target Basic System. [ OK ] Started Kernel Logging Service. [ OK ] Started System Logging Service. [ OK ] Started Periodic Command Scheduler. Starting D-Bus System Message Bus... [ OK ] Started Getty on tty1. Starting IPv6 Packet Filtering Framework... Starting IPv4 Packet Filtering Framework... Starting Telephony service... [ OK ] Started Serial Getty on ttyS2. [ OK ] Reached target Login Prompts. [ 13.546081] Bluetooth: Core ver 2.22 [ 13.555175] NET: Registered PF_BLUETOOTH protocol family [ 13.560516] Bluetooth: HCI device and connection manager initialized [ 13.566925] Bluetooth: HCI socket layer initialized [ 13.571838] Bluetooth: L2CAP socket layer initialized [ 13.576965] Bluetooth: SCO socket layer initialized Starting Resets System Activity Logs... Starting User Login Management... Starting OpenSSH Key Generation... [ OK ] Started D-Bus System Message Bus. [ OK ] Finished IPv6 Packet Filtering Framework. [ OK ] Finished IPv4 Packet Filtering Framework. [ OK ] Finished Resets System Activity Logs. [ OK ] Reached target Preparation for Network. Starting Network Configuration... [ OK ] Started Telephony service. [ OK ] Started User Login Management. [ 14.176635] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 14.256225] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ OK ] Started Network Configuration. [ 14.356201] cpsw-switch 48484000.switch: starting ndev. mode: dual_mac Starting Network Name Resolution... [ 14.504577] Micrel KSZ9031 Gigabit PHY 48485000.mdio:02: attached PHY driver (mii_bus:phy_addr=48485000.mdio:02, irq=POLL) [ 14.559631] cpsw-switch 48484000.switch: starting ndev. mode: dual_mac [ 14.675628] Micrel KSZ9031 Gigabit PHY 48485000.mdio:01: attached PHY driver (mii_bus:phy_addr=48485000.mdio:01, irq=POLL) [ OK ] Started Network Name Resolution. [ OK ] Reached target Network. [ OK ] Reached target Host and Network Name Lookups. Starting Avahi mDNS/DNS-SD Stack... [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Reached target Multi-User System. Starting Record Runlevel Change in UTMP... [ OK ] Finished Record Runlevel Change in UTMP. [ 16.656158] cpsw-switch 48484000.switch eth1: Link is Up - 100Mbps/Full - flow control off [ 16.664489] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 18.896118] cpsw-switch 48484000.switch eth0: Link is Up - 1Gbps/Full - flow control off [ 18.904296] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Linux-Kernel-Functional-Testing nodistro.0 am57xx-evm ttyS2 am57xx-evm login: root root 7[r[999;999H[6n[ 21.618377] platform 488c0000.omap_dwc3_2: deferred probe pending [ 21.624511] platform sound0: deferred probe pending root@am57xx-evm:~# root@am57xx-evm:~# # # root@am57xx-evm:~# export SHELL=/bin/sh export SHELL=/bin/sh root@am57xx-evm:~# . /lava-5900484/environment . /lava-5900484/environment root@am57xx-evm:~# /lava-5900484/bin/lava-test-runner /lava-5900484/0 /lava-5900484/bin/lava-test-runner /lava-5900484/0 + export TESTRUN_ID=0_prep-tmp-disk + TESTRUN_ID=0_prep-tmp-disk + cd /lava-5900484/0/tests/0_prep-tmp-disk ++ cat uuid + UUID=5900484_2.1.4.1 + set +x ++ lava-target-storage SATA + export STORAGE_DEV=/dev/disk/by-id/ata-SanDisk_SSD_PLUS_120GB_190703A00329 + STORAGE_DEV=/dev/disk/by-id/ata-SanDisk_SSD_PLUS_120GB_190703A00329 + test -n /dev/disk/by-id/ata-SanDisk_SSD_PLUS_120GB_190703A00329 + echo y + mkfs.ext4 /dev/disk/by-id/ata-SanDisk_SSD_PLUS_120GB_190703A00329 mke2fs 1.46.5 (30-Dec-2021) Discarding device blocks: 0/29306880 1048576/29306880 7864320/29306880[ 30.527496] 8<--- cut here --- [ 30.530578] Unable to handle kernel paging request at virtual address f880350c [ 30.537841] [f880350c] *pgd=00000000 [ 30.541442] Internal error: Oops: 5 [#1] SMP ARM [ 30.546081] Modules linked in: cfg80211 bluetooth etnaviv snd_soc_simple_card snd_soc_simple_card_utils gpu_sched onboard_usb_hub snd_soc_davinci_mcasp snd_soc_ti_udma snd_soc_ti_edma snd_soc_ti_sdma snd_soc_core ac97_bus snd_pcm_dmaengine snd_pcm snd_timer snd soundcore display_connector [ 30.571807] CPU: 0 PID: 287 Comm: rngd Not tainted 6.0.11-rc1 #1 [ 30.577850] Hardware name: Generic DRA74X (Flattened Device Tree) [ 30.583984] PC is at l3_interrupt_handler+0x70/0x384 [ 30.588958] LR is at 0x3 [ 30.591522] pc : [] lr : [<00000003>] psr: 200d0193 [ 30.597808] sp : f0001eb8 ip : 0000000c fp : 00000000 [ 30.603057] r10: 00000060 r9 : c226a320 r8 : 00000060 [ 30.608306] r7 : f8000000 r6 : c39d4940 r5 : c210c8c0 r4 : c39e4200 [ 30.614868] r3 : 00000000 r2 : f880350c r1 : c210c64c r0 : c39d4948 [ 30.621429] Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none [ 30.628692] Control: 10c5387d Table: 84f3406a DAC: 00000051 [ 30.634460] Register r0 information: slab kmalloc-128 start c39d4900 pointer offset 72 size 128 [ 30.643218] Register r1 information: non-slab/vmalloc memory [ 30.648895] Register r2 information: non-paged memory [ 30.653991] Register r3 information: NULL pointer [ 30.658721] Register r4 information: slab kmalloc-64 start c39e4200 pointer offset 0 size 64 [ 30.667205] Register r5 information: non-slab/vmalloc memory [ 30.672912] Register r6 information: slab kmalloc-128 start c39d4900 pointer offset 64 size 128 [ 30.681640] Register r7 information: 0-page vmalloc region starting at 0xf8000000 allocated at iotable_init+0x0/0xf4 [ 30.692230] Register r8 information: non-paged memory [ 30.697326] Register r9 information: non-slab/vmalloc memory [ 30.703002] Register r10 information: non-paged memory [ 30.708160] Register r11 information: NULL pointer [ 30.712982] Register r12 information: non-paged memory [ 30.718139] Process rngd (pid: 287, stack limit = 0x49af5199) [ 30.723937] Stack: (0xf0001eb8 to 0xf0002000) [ 30.728302] 1ea0: 00000008 f0001f10 [ 30.736511] 1ec0: c2f43480 00000003 00000406 c087457c c3b82024 00000001 00000000 00000001 [ 30.744750] 1ee0: c2f43480 00000000 00000000 8b7f63d6 c3b80200 c3b82024 00000001 c2f43480 [ 30.752960] 1f00: c2d3b800 00000100 c2003080 c0796ab0 00000000 8b7f63d6 00000000 c49e0e00 [ 30.761169] 1f20: 00000000 00000000 c3b82000 c0bf797c c49e0ea8 00000000 c2f43480 c49e0e00 [ 30.769378] 1f40: c226a320 8b7f63d6 c49e0ea8 c39e4200 c2013a68 00000000 c39d3700 c226a340 [ 30.777618] 1f60: c226a320 00000060 c2f43480 c03b85e8 c2003094 00000000 c2009f50 c2269993 [ 30.785827] 1f80: c226a320 c39d3700 c2013a68 c39d376c c1f97510 fa21200c f0001fd0 9e97da7a [ 30.794036] 1fa0: f12adfa8 c03b87d8 c39d3700 c2013a68 fa212000 c03bd2e0 c200aa08 c210a274 [ 30.802276] 1fc0: fa212000 c03b7d8c c200aa08 c0301804 c1f97504 f12adfb0 00000000 c2f43480 [ 30.810485] 1fe0: c1f91044 6ad6d48f 9e97da7a c130b0d8 b6f22d36 800d0030 ffffffff c08597bc [ 30.818695] l3_interrupt_handler from __handle_irq_event_percpu+0xa0/0x1fc [ 30.825714] __handle_irq_event_percpu from handle_irq_event+0x4c/0x94 [ 30.832275] handle_irq_event from handle_fasteoi_irq+0xa0/0x194 [ 30.838317] handle_fasteoi_irq from generic_handle_domain_irq+0x30/0x40 [ 30.845031] generic_handle_domain_irq from gic_handle_irq+0x90/0xb0 [ 30.851440] gic_handle_irq from generic_handle_arch_irq+0x34/0x44 [ 30.857666] generic_handle_arch_irq from call_with_stack+0x18/0x20 [ 30.863952] call_with_stack from __irq_usr+0x7c/0xa0 [ 30.869049] Exception stack(0xf12adfb0 to 0xf12adff8) [ 30.874114] dfa0: 9e97da7a 6ad6d48f 9e97da7a 6ad6d48f [ 30.882324] dfc0: 00000002 00000000 00000000 b6b9e8e8 9e97da78 6ad6d48f 9e97da7a 6ad6d48f [ 30.890563] dfe0: 00000000 b6b9e8e8 b6f23701 b6f22d36 800d0030 ffffffff [ 30.897186] Code: e4907004 e5952000 e08c2002 e0872002 (e5924000) [ 30.903320] ---[ end trace 0000000000000000 ]--- [ 30.907958] Kernel panic - not syncing: Fatal exception in interrupt [ 30.914367] CPU1: stopping [ 30.917083] CPU: 1 PID: 291 Comm: rngd Tainted: G D 6.0.11-rc1 #1 [ 30.924591] Hardware name: Generic DRA74X (Flattened Device Tree) [ 30.930725] unwind_backtrace from show_stack+0x18/0x1c [ 30.935974] show_stack from dump_stack_lvl+0x58/0x70 [ 30.941070] dump_stack_lvl from do_handle_IPI+0x2e0/0x318 [ 30.946594] do_handle_IPI from ipi_handler+0x20/0x28 [ 30.951660] ipi_handler from handle_percpu_devid_irq+0x94/0x1e8 [ 30.957702] handle_percpu_devid_irq from generic_handle_domain_irq+0x30/0x40 [ 30.964874] generic_handle_domain_irq from gic_handle_irq+0x90/0xb0 [ 30.971282] gic_handle_irq from generic_handle_arch_irq+0x34/0x44 [ 30.977478] generic_handle_arch_irq from call_with_stack+0x18/0x20 [ 30.983795] call_with_stack from __irq_svc+0x9c/0xb8 [ 30.988861] Exception stack(0xf12a5ef8 to 0xf12a5f40) [ 30.993927] 5ee0: 0011baa7 00000000 [ 31.002166] 5f00: 626ad21a 0000270a 00000000 c22c9480 f12a5f80 00001706 c03002f0 c2f47380 [ 31.010375] 5f20: 00000193 becec000 f12a5f24 f12a5f48 c03e98b8 c03e98bc 600f0013 ffffffff [ 31.018585] __irq_svc from ktime_get_real_ts64+0x58/0x174 [ 31.024108] ktime_get_real_ts64 from posix_get_realtime_timespec+0x14/0x1c [ 31.031127] posix_get_realtime_timespec from sys_clock_gettime+0x64/0xc8 [ 31.037933] sys_clock_gettime from __sys_trace_return+0x0/0x10 [ 31.043884] Exception stack(0xf12a5fa8 to 0xf12a5ff0) [ 31.048980] 5fa0: 00000000 b61fea18 00000000 b61fea18 00000000 00000000 [ 31.057189] 5fc0: 00000000 b61fea18 b61feacc 00000193 000172a0 00000000 b59ff000 becec000 [ 31.065399] 5fe0: becec020 b61fe9c0 beced55c beced6b8 [ 31.070465] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---