On 3/10/20 10:27 AM, Sowjanya Komatineni wrote:
On 3/10/20 10:09 AM, Ulf Hansson wrote:
External email: Use caution opening links or attachments
[...]
I would like to get the regression fixed asap, but I also would like to avoid reverting patches, unless really necessary. May I propose the following two options.
- Find out why polling with ->card_busy() or CMD13, for a CMD6 with
an R1 response doesn't work - and then fix that behaviour.
- Set the mmc->max_busy_timeout to zero for sdhci-tegra, which
makes the core to always use R1B for CMD6 (and erase). This also means that when the cmd->busy_timeout becomes longer than 11s, sdhci-tegra must disable the HW busy timeout and just wait "forever".
If you decide for 2, you can add the software timeout support on top, but make that can be considered as a next step of an improvement, rather than needed as fix. Note that, I believe there are some support for software timeout already in the sdhci core, maybe you need to tweak it a bit for your case, I don't know.
Kind regards Uffe
Hi Uffe
Will go with 2nd option and will send patches out when ready.
Okay, good.
BTW, Tegra host also supports SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK for data timeout based on host clock when using finite mode (HW busy detection based on DATA TIMEOUT count value when cmd operation timeout is < 11s for tegra host).
So, looks like we cant set host max_busy_timeout to 0 for Tegra host to force R1B during SWITCH and SLEEP_AWAKE.
So, was thinking to introduce host capability MMC_CAP2_LONG_WAIT_HW_BUSY which can be used for hosts supporting long or infinite HW busy wait detection and will update mmc and mmc_ops drivers to not allow convert R1B to R1B for hosts with this capability during SLEEP_AWAKE and SWITCH.
That seems reasonable, it becomes probably both easier and clearer by adding a new host cap.
In any case, let me help out and cook a patch for this for the core part (I leave the sdhci change to you). It may be a bit tricky, especially since I have currently queued a bunch of new changes for v5.7, that enables more users of mmc_poll_for_busy() in the core. Maybe I need to temporarily drop them, so we can fix these problems first. I will check.
Probably, I would also name the cap MMC_CAP_HW_NEED_RSP_BUSY, as that seems to be describing the common problem we have for sdhci omap/tegra.
Finally, it seems like MMC_CAP_WAIT_WHILE_BUSY should be set for sdhci- tegra, so while at it, perhaps you can cook a patch for that as well.
Kind regards Uffe
OK, I sent v1 yesterday. Please ignore them then.
Oh, I haven't seen them. In any case, I am ignoring them.
Will send out patches only for HW busy wait modes program based on cmd timeout and WAIT_WHILE_BUSY enabled.
Great, thanks!
Please help test the series I just posted as well, if you have the time ofcourse.
Kind regards Uffe
Sure,
Thanks
Sowjanya
mmc_sleep() also needs update to force R1B when host sets capability MMC_CAP_NEED_RSP_BUSY