
Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.XF.1.0-00301
S - IMAGE_VARIANT_STRING=M8996LAB
S - OEM_IMAGE_VERSION_STRING=crm-ubuntu68
S - Boot Interface: UFS
S - Secure Boot: Off
S - Boot Config @ 0x00076044 = 0x000001c9
S - JTAG ID @ 0x000760f4 = 0x4003e0e1
S - OEM ID @ 0x000760f8 = 0x00000000
S - Serial Number @ 0x00074138 = 0xbe8b8597
S - OEM Config Row 0 @ 0x00074188 = 0x0000000000000000
S - OEM Config Row 1 @ 0x00074190 = 0x0000000000000000
S - Feature Config Row 0 @ 0x000741a0 = 0x0050000010000100
S - Feature Config Row 1 @ 0x000741a8 = 0x00fff00001ffffff
S - Core 0 Frequency, 1228 MHz
B -         0 - PBL, Start
B -     10412 - bootable_media_detect_entry, Start
B -     50172 - bootable_media_detect_success, Start
B -     50174 - elf_loader_entry, Start
B -     51747 - auth_hash_seg_entry, Start
B -     51850 - auth_hash_seg_exit, Start
B -     85138 - elf_segs_hash_verify_entry, Start
B -     87636 - PBL, End
B -     89670 - SBL1, Start
B -    185653 - usb: hs_phy_nondrive_start
B -    186019 - usb: PLL lock success - 0x3
B -    189008 - usb: hs_phy_nondrive_finish
B -    193126 - boot_flash_init, Start
D -        30 - boot_flash_init, Delta
B -    200232 - sbl1_ddr_set_default_params, Start
D -        30 - sbl1_ddr_set_default_params, Delta
B -    208223 - boot_config_data_table_init, Start
D -    230915 - boot_config_data_table_init, Delta - (60 Bytes)
B -    443683 - CDT Version:3,Platform ID:24,Major ID:1,Minor ID:0,Subtype:0
B -    448380 - Image Load, Start
D -     22509 - PMIC Image Loaded, Delta - (37272 Bytes)
B -    470859 - pm_device_init, Start
B -    476623 - PON REASON:PM0:0x60 PM1:0x20
B -    513040 - PM_SET_VAL:Skip
D -     40046 - pm_device_init, Delta
B -    514962 - pm_driver_init, Start
D -      2928 - pm_driver_init, Delta
B -    521550 - pm_sbl_chg_init, Start
D -        91 - pm_sbl_chg_init, Delta
B -    528321 - vsense_init, Start
D -         0 - vsense_init, Delta
B -    538264 - Pre_DDR_clock_init, Start
D -       335 - Pre_DDR_clock_init, Delta
B -    541954 - ddr_initialize_device, Start
B -    545645 - 8996 v3.x detected, Max frequency = 1.8 GHz
B -    555252 - ddr_initialize_device, Delta
B -    555283 - DDR ID, Rank 0, Rank 1, 0x6, 0x300, 0x300
B -    559126 - Basic DDR tests done
B -    627873 - clock_init, Start
D -       274 - clock_init, Delta
B -    631258 - Image Load, Start
D -      4331 - QSEE Dev Config Image Loaded, Delta - (46008 Bytes)
B -    636687 - Image Load, Start
D -      5338 - APDP Image Loaded, Delta - (0 Bytes)
B -    645319 - usb: UFS Serial - 34b19bcc
B -    649680 - usb: fedl, vbus_low
B -    653310 - Image Load, Start
D -     55174 - QSEE Image Loaded, Delta - (1640572 Bytes)
B -    708484 - Image Load, Start
D -      2013 - SEC Image Loaded, Delta - (4096 Bytes)
B -    716048 - sbl1_efs_handle_cookies, Start
D -       488 - sbl1_efs_handle_cookies, Delta
B -    724527 - Image Load, Start
D -     14366 - QHEE Image Loaded, Delta - (254184 Bytes)
B -    738893 - Image Load, Start
D -     14091 - RPM Image Loaded, Delta - (223900 Bytes)
B -    753807 - Image Load, Start
D -      3172 - STI Image Loaded, Delta - (0 Bytes)
B -    760517 - Image Load, Start
D -     34740 - APPSBL Image Loaded, Delta - (748620 Bytes)
B -    795348 - SBL1, End
D -    709918 - SBL1, Delta
S - Flash Throughput, 96000 KB/s  (2958928 Bytes,  30763 us)
S - DDR Frequency, 1017 MHz
Android Bootloader - UART_DM Initialized!!!
[0] BUILD_VERSION=
[0] BUILD_DATE=15:14:26 - Jul  5 2022
[0] welcome to lk

[10] platform_init()
[10] target_init()
[10] RPM GLink Init
[10] Opening RPM Glink Port success
[10] Opening SSR Glink Port success
[20] Glink Connection between APPS and RPM established
[20] Glink Connection between APPS and RPM established
[40] UFS init success
[80] Qseecom Init Done in Appsbl
[80] secure app region addr=0x86600000 size=0x2200000[90] TZ App region notif returned with status:0 addr:86600000 size:35651584
[90] TZ App log region register returned with status:0 addr:916d4000 size:4096
[100] Qseecom TZ Init Done in Appsbl
[120] Loading cmnlib done
[120] qseecom_start_app: Loading app keymaster for the first time'
[150] <8>keymaster: "\"KEYMASTER Init \""
[160] Setting display_panel to none
[160] Selected panel: none
Skip panel configuration
[160] pm8x41_get_is_cold_boot: cold boot
[170] Unable to locate /bootselect partition
[170] boot_verifier: Device is in ORANGE boot state.
[180] Device is unlocked! Skipping verification...
[180] Loading (boot) image (27996160): start
[290] Loading (boot) image (27996160): done
[290] use_signed_kernel=1, is_unlocked=1, is_tampered=0.
[300] Your device has been unlocked and can't be trusted.
[300] mdtp: mdtp_img loaded
[310] mdtp: is_test_mode: test mode is set to 1
[310] mdtp: read_metadata: SUCCESS
[330] LK SEC APP Handle: 0x1
[330] Return value from recv_data: 14
[340] Return value from recv_data: 14
[350] Return value from recv_data: 14
[360] decompressing kernel image: start
[630] decompressing kernel image: done
[640] qcom,msm-id entry not found
[640] Only one appended non-skales DTB, select it.
[650] cmdline: root=/dev/sda1 rootwait console=tty0 console=ttyMSM0,115200n8 androidboot.bootdevice=624000.ufshc androidboot.verifiedbootstate=orange androidboot.veritymode=enforcing androidboot.serialno=34b19bcc androidboot.baseband=apq mdss_mdp.panel=0
[670] Updating device tree: start
[670] Updating device tree: done
[680] Return value from recv_data: 14
[690] RPM GLINK UnInit
[690] Qseecom De-Init Done in Appsbl
[690] booting linux @ 0x80080000, ramdisk @ 0x924d3000 (18740546), tags/device tree @ 0x85600000
[700] Jumping to kernel via monitor
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x511f2112]
[    0.000000] Linux version 5.15.0-qcomlt-arm64 (slroot@PDXKSTEINER) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the Arm Architecture 11.2-2022.02 (arm-11.14)) 11.2.1 20220111, GNU ld (GNU Toolchain for the Arm Architecture 11.2-2022.02 (arm-11.14)) 2.37.20220122) #4 SMP PREEMPT Wed Dec 14 11:57:51 PST 2022
[    0.000000] Machine model: Qualcomm Technologies, Inc. DB820c
[    0.000000] efi: UEFI not found.
[    0.000000] [Firmware Bug]: Kernel image misaligned at boot, please fix your bootloader!
[    0.000000] OF: reserved mem: OVERLAP DETECTED!
[    0.000000] gpu@8f200000 (0x0000000090b00000--0x0000000091500000) overlaps with slpi@90b00000 (0x0000000090b00000--0x0000000091500000)
[    0.000000] Reserved memory: created DMA memory pool at 0x0000000090b00000, size 10 MiB
[    0.000000] OF: reserved mem: initialized node gpu@8f200000, compatible id shared-dma-pool
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x000000015ea4ffff]
[    0.000000] NUMA: NODE_DATA [mem 0x15e43dc00-0x15e43ffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000080000000-0x00000000ffffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000015ea4ffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000080000000-0x00000000857fffff]
[    0.000000]   node   0: [mem 0x0000000085800000-0x00000000916fffff]
[    0.000000]   node   0: [mem 0x0000000091700000-0x00000000a1dfffff]
[    0.000000]   node   0: [mem 0x00000000a1e00000-0x00000000a1ffffff]
[    0.000000]   node   0: [mem 0x00000000a2000000-0x00000000dfffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000015ea4ffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000015ea4ffff]
[    0.000000] On node 0, zone Normal: 5552 pages in unavailable ranges
[    0.000000] cma: Reserved 32 MiB at 0x00000000de000000
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.0
[    0.000000] psci: OSI mode supported.
[    0.000000] percpu: Embedded 19 pages/cpu s40664 r8192 d28968 u77824
[    0.000000] Detected PIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: detected: Spectre-v2
[    0.000000] CPU features: detected: Spectre-v4
[    0.000000] CPU features: kernel page table isolation forced ON by KASLR
[    0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[    0.000000] CPU features: detected: Qualcomm Technologies Falkor/Kryo erratum 1003
[    0.000000] CPU features: detected: Qualcomm erratum 1009, or ARM erratum 1286807
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 768678
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=/dev/sda1 rootwait console=tty0 console=ttyMSM0,115200n8 androidboot.bootdevice=624000.ufshc androidboot.verifiedbootstate=orange androidboot.veritymode=enforcing androidboot.serialno=34b19bcc androidboot.baseband=apq mdss_mdp.panel=0
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: mapped [mem 0x00000000da000000-0x00000000de000000] (64MB)
[    0.000000] Memory: 2722560K/3123520K available (12800K kernel code, 1962K rwdata, 5708K rodata, 3008K init, 414K bss, 368192K reserved, 32768K cma-reserved)
[    0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU event tracing is enabled.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000]  Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GIC: enabling workaround for GICv3: Qualcomm MSM8996 broken firmware
[    0.000000] GICv3: 608 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] Root IRQ handler: gic_handle_irq
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: GICv4 features:
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000009c00000
[    0.000000] ITS: No ITS available, not enabling LPIs
[    0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.000139] Console: colour dummy device 80x25
[    0.000651] printk: console [tty0] enabled
[    0.000721] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
[    0.000744] pid_max: default: 32768 minimum: 301
[    0.000804] LSM: Security Framework initializing
[    0.000902] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.000926] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.002535] rcu: Hierarchical SRCU implementation.
[    0.003784] EFI services will not be available.
[    0.004211] smp: Bringing up secondary CPUs ...
[    0.005044] Detected PIPT I-cache on CPU1
[    0.005083] GICv3: CPU1: found redistributor 1 region 0:0x0000000009c40000
[    0.005138] CPU1: Booted secondary processor 0x0000000001 [0x511f2112]
[    0.008811] Detected PIPT I-cache on CPU2
[    0.009921] GICv3: CPU2: found redistributor 100 region 0:0x0000000009c80000
[    0.011161] CPU2: Booted secondary processor 0x0000000100 [0x511f2052]
[    0.019422] Detected PIPT I-cache on CPU3
[    0.020467] GICv3: CPU3: found redistributor 101 region 0:0x0000000009cc0000
[    0.021664] CPU3: Booted secondary processor 0x0000000101 [0x511f2052]
[    0.025280] smp: Brought up 1 node, 4 CPUs
[    0.025405] SMP: Total of 4 processors activated.
[    0.025428] CPU features: detected: 32-bit EL0 Support
[    0.025438] CPU features: detected: 32-bit EL1 Support
[    0.025452] CPU features: detected: CRC32 instructions
[    0.122944] CPU: All CPU(s) started at EL1
[    0.123617] alternatives: patching kernel code
[    0.132217] devtmpfs: initialized
[    0.144074] KASLR disabled due to lack of seed
[    0.144324] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.144356] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.145063] pinctrl core: initialized pinctrl subsystem
[    0.145785] DMI not present or invalid.
[    0.146654] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.152622] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[    0.153882] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.154641] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.154716] audit: initializing netlink subsys (disabled)
[    0.155567] audit: type=2000 audit(0.152:1): state=initialized audit_enabled=0 res=1
[    0.155885] thermal_sys: Registered thermal governor 'step_wise'
[    0.155901] thermal_sys: Registered thermal governor 'power_allocator'
[    0.158477] cpuidle: using governor menu
[    0.158630] NET: Registered PF_QIPCRTR protocol family
[    0.158792] hw-breakpoint: found 8 breakpoint and 4 watchpoint registers.
[    0.160340] ASID allocator initialised with 32768 entries
[    0.161599] Serial: AMBA PL011 UART driver
[    0.183441] platform 627000.phy: Fixing up cyclic dependency with 624000.ufshc
[    0.194823] CBF: SET parent to 2
[    0.194879] CBF: SET parent to 1
[    0.194891] CBF: SET parent to 1
[    0.205270] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.205303] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.205315] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.205328] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.207870] cryptd: max_cpu_qlen set to 1000
[    0.213562] iommu: Default domain type: Translated
[    0.213593] iommu: DMA domain TLB invalidation policy: strict mode
[    0.214956] vgaarb: loaded
[    0.215215] SCSI subsystem initialized
[    0.215621] usbcore: registered new interface driver usbfs
[    0.215663] usbcore: registered new interface driver hub
[    0.215700] usbcore: registered new device driver usb
[    0.216065] mc: Linux media interface: v0.10
[    0.216094] videodev: Linux video capture interface: v2.00
[    0.216155] pps_core: LinuxPPS API ver. 1 registered
[    0.216166] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.216186] PTP clock support registered
[    0.216321] EDAC MC: Ver: 3.0.0
[    0.217844] CPUidle PSCI: failed to enable OSI mode: -95
[    0.218340] qcom_scm: convention: smc arm 64
[    0.234825] FPGA manager framework
[    0.236857] clocksource: Switched to clocksource arch_sys_counter
[    0.237037] VFS: Disk quotas dquot_6.6.0
[    0.237085] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.237220] vreg_s3a_1p3: Bringing 0uV into 1300000-1300000uV
[    0.237493] vreg_s3a_1p3: supplied by vph_pwr
[    0.237586] vreg_s4a_1p8: Bringing 0uV into 1800000-1800000uV
[    0.237617] vreg_s4a_1p8: supplied by vph_pwr
[    0.237936] vreg_s5a_2p15: Bringing 0uV into 2150000-2150000uV
[    0.238115] vreg_s5a_2p15: supplied by vph_pwr
[    0.238201] vreg_s7a_1p0: Bringing 0uV into 800000-800000uV
[    0.238329] vreg_s7a_1p0: supplied by vph_pwr
[    0.238411] vreg_l1a_1p0: Bringing 0uV into 1000000-1000000uV
[    0.238557] vreg_l2a_1p25: Bringing 0uV into 1250000-1250000uV
[    0.238690] vreg_l2a_1p25: supplied by vreg_s3a_1p3
[    0.238781] vreg_l3a_0p875: Bringing 0uV into 850000-850000uV
[    0.238909] vreg_l3a_0p875: supplied by vreg_s3a_1p3
[    0.239003] vreg_l4a_1p225: Bringing 0uV into 1225000-1225000uV
[    0.239124] vreg_l4a_1p225: supplied by vreg_s3a_1p3
[    0.239203] vreg_l6a_1p2: Bringing 0uV into 1200000-1200000uV
[    0.239351] vreg_l6a_1p2: supplied by vreg_s5a_2p15
[    0.239443] vreg_l8a_1p8: Bringing 0uV into 1800000-1800000uV
[    0.239571] vreg_l8a_1p8: supplied by vph_pwr
[    0.239656] vreg_l9a_1p8: Bringing 0uV into 1800000-1800000uV
[    0.239834] vreg_l10a_1p8: Bringing 0uV into 1800000-1800000uV
[    0.240030] vreg_l11a_1p15: Bringing 0uV into 1150000-1150000uV
[    0.240181] vreg_l11a_1p15: supplied by vreg_s3a_1p3
[    0.240269] vreg_l12a_1p8: Bringing 0uV into 1800000-1800000uV
[    0.240417] vreg_l12a_1p8: supplied by vreg_s5a_2p15
[    0.240504] vreg_l13a_2p95: Bringing 0uV into 1800000-1800000uV
[    0.240830] vreg_l14a_1p8: Bringing 0uV into 1800000-1800000uV
[    0.241001] vreg_l14a_1p8: supplied by vreg_s5a_2p15
[    0.241105] vreg_l15a_1p8: Bringing 0uV into 1800000-1800000uV
[    0.241273] vreg_l15a_1p8: supplied by vreg_s5a_2p15
[    0.241361] vreg_l16a_2p7: Bringing 0uV into 2700000-2700000uV
[    0.241528] vreg_l16a_2p7: supplied by vph_pwr
[    0.241621] vreg_l17a_2p8: Bringing 0uV into 2500000-2500000uV
[    0.241841] vreg_l18a_2p85: Bringing 0uV into 2700000-2700000uV
[    0.242082] vreg_l19a_2p8: Bringing 0uV into 3000000-3000000uV
[    0.242332] vreg_l20a_2p95: Bringing 0uV into 2950000-2950000uV
[    0.242599] vreg_l21a_2p95: Bringing 0uV into 2950000-2950000uV
[    0.242887] vreg_l22a_3p0: Bringing 0uV into 3300000-3300000uV
[    0.242990] NET: Registered PF_INET protocol family
[    0.243117] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.243194] vreg_l23a_2p8: Bringing 0uV into 2800000-2800000uV
[    0.243493] vreg_l24a_3p075: Bringing 0uV into 3075000-3075000uV
[    0.243808] vreg_l25a_1p2: Bringing 0uV into 1200000-1200000uV
[    0.244081] vreg_l25a_1p2: supplied by vreg_s3a_1p3
[    0.244177] vreg_l26a_0p8: Bringing 0uV into 1000000-1000000uV
[    0.244441] vreg_l26a_0p8: supplied by vreg_s3a_1p3
[    0.244536] vreg_l28a_0p925: Bringing 0uV into 925000-925000uV
[    0.244862] vreg_l28a_0p925: supplied by vreg_s3a_1p3
[    0.244981] vreg_l29a_2p8: Bringing 0uV into 2800000-2800000uV
[    0.245362] vreg_l30a_1p8: Bringing 0uV into 1800000-1800000uV
[    0.245642] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    0.245683] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.245703] vreg_l30a_1p8: supplied by vph_pwr
[    0.245704] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.245811] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[    0.245869] vreg_l32a_1p8: Bringing 0uV into 1800000-1800000uV
[    0.246286] vreg_l32a_1p8: supplied by vreg_s5a_2p15
[    0.246718] vreg_lvs1a_1p8: supplied by vreg_s4a_1p8
[    0.247108] vreg_lvs2a_1p8: supplied by vreg_s4a_1p8
[    0.247562] vph_pwr_bbyp: Bringing 0uV into 3300000-3300000uV
[    0.247503] TCP: Hash tables configured (established 32768 bind 32768)
[    0.247898] vph_pwr_bbyp: supplied by vph_pwr
[    0.247969] vreg_s1b_1p025: Bringing 0uV into 1025000-1025000uV
[    0.248770] vreg_s1b_1p025: supplied by vph_pwr
[    0.252015] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.254774] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.262162] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.274647] RPC: Registered named UNIX socket transport module.
[    0.275491] RPC: Registered udp transport module.
[    0.276087] RPC: Registered tcp transport module.
[    0.277283] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.278190] PCI: CLS 0 bytes, default 64
[    0.279202] Unpacking initramfs...
[    0.300146] kvm [1]: HYP mode not available
[    0.430110] workingset: timestamp_bits=42 max_order=20 bucket_order=0
[    0.793215] Freeing initrd memory: 18300K
[    0.839105] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.868582] NFS: Registering the id_resolver key type
[    0.870938] Key type id_resolver registered
[    0.871665] Key type id_legacy registered
[    0.877726] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.878607] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    0.885709] 9p: Installing v9fs 9p2000 file system support
[    4.806044] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    4.807011] io scheduler mq-deadline registered
[    4.807664] io scheduler kyber registered
[    4.950072] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    4.959211] msm_serial: driver initialized
[    5.002883] loop: module loaded
[    5.004085] megasas: 07.717.02.00-rc1
[    5.008623] spmi spmi-0: PMIC arbiter version v2 (0x20010000)
[    5.020918] vreg_l1a_1p0: supplied by vreg_s1b_1p025
[    5.021062] vreg_l9a_1p8: supplied by vph_pwr_bbyp
[    5.021187] vreg_l10a_1p8: supplied by vph_pwr_bbyp
[    5.021316] vreg_l13a_2p95: supplied by vph_pwr_bbyp
[    5.021439] vreg_l17a_2p8: supplied by vph_pwr_bbyp
[    5.021571] vreg_l18a_2p85: supplied by vph_pwr_bbyp
[    5.021689] vreg_l19a_2p8: supplied by vph_pwr_bbyp
[    5.021811] vreg_l20a_2p95: supplied by vph_pwr_bbyp
[    5.021939] vreg_l21a_2p95: supplied by vph_pwr_bbyp
[    5.022065] vreg_l22a_3p0: supplied by vph_pwr_bbyp
[    5.022192] vreg_l23a_2p8: supplied by vph_pwr_bbyp
[    5.022317] vreg_l24a_3p075: supplied by vph_pwr_bbyp
[    5.022438] vreg_l29a_2p8: supplied by vph_pwr_bbyp
[    5.022572] s1: supplied by regulator-dummy
[    5.022956] s2: supplied by regulator-dummy
[    5.023324] s3: supplied by regulator-dummy
[    5.023684] s4: supplied by regulator-dummy
[    5.024064] s5: supplied by regulator-dummy
[    5.024879] s7: supplied by regulator-dummy
[    5.025251] s8: supplied by regulator-dummy
[    5.025636] s11: supplied by regulator-dummy
[    5.026001] s12: supplied by regulator-dummy
[    5.026376] l1: supplied by regulator-dummy
[    5.026766] l2: supplied by regulator-dummy
[    5.027155] l3: supplied by regulator-dummy
[    5.027529] l4: supplied by regulator-dummy
[    5.027928] l6: supplied by regulator-dummy
[    5.028304] l7: supplied by regulator-dummy
[    5.028751] l8: supplied by regulator-dummy
[    5.029158] l9: supplied by regulator-dummy
[    5.029531] l10: supplied by regulator-dummy
[    5.029918] l11: supplied by regulator-dummy
[    5.030320] l12: supplied by regulator-dummy
[    5.030712] l13: supplied by regulator-dummy
[    5.031098] l14: supplied by regulator-dummy
[    5.031499] l15: supplied by regulator-dummy
[    5.031892] l16: supplied by regulator-dummy
[    5.032283] l17: supplied by regulator-dummy
[    5.032736] l18: supplied by regulator-dummy
[    5.033143] l19: supplied by regulator-dummy
[    5.033546] l20: supplied by regulator-dummy
[    5.033963] l21: supplied by regulator-dummy
[    5.034372] l22: supplied by regulator-dummy
[    5.034772] l23: supplied by regulator-dummy
[    5.035195] l24: supplied by regulator-dummy
[    5.035611] l25: supplied by regulator-dummy
[    5.036025] l26: supplied by regulator-dummy
[    5.036438] l27: supplied by regulator-dummy
[    5.036903] l28: supplied by regulator-dummy
[    5.037332] l29: supplied by regulator-dummy
[    5.037746] l30: supplied by regulator-dummy
[    5.038158] l31: supplied by regulator-dummy
[    5.038594] l32: supplied by regulator-dummy
[    5.038990] lvs1: supplied by regulator-dummy
[    5.039385] lvs2: supplied by regulator-dummy
[    5.046201] s1: supplied by regulator-dummy
[    5.046779] VDD_GFX: supplied by vph_pwr
[    5.047241] l1: supplied by regulator-dummy
[    5.052048] tun: Universal TUN/TAP device driver, 1.6
[    5.058493] VFIO - User Level meta-driver version: 0.3
[    5.061872] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.061913] ehci-pci: EHCI PCI platform driver
[    5.061974] ehci-platform: EHCI generic platform driver
[    5.062277] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    5.062340] ohci-pci: OHCI PCI platform driver
[    5.062418] ohci-platform: OHCI generic platform driver
[    5.063179] usbcore: registered new interface driver usb-storage
[    5.066956] i2c_dev: i2c /dev entries driver
[    5.072472] input: pm8941_pwrkey as /devices/platform/soc/400f000.qcom,spmi/spmi-0/0-00/400f000.qcom,spmi:pmic@0:pon@800/400f000.qcom,spmi:pmic@0:pon@800:pwrkey/input/input0
[    5.079185] input: pm8941_resin as /devices/platform/soc/400f000.qcom,spmi/spmi-0/0-00/400f000.qcom,spmi:pmic@0:pon@800/400f000.qcom,spmi:pmic@0:pon@800:resin/input/input1
[    5.104339] sdhci: Secure Digital Host Controller Interface driver
[    5.104381] sdhci: Copyright(c) Pierre Ossman
[    5.105337] Synopsys Designware Multimedia Card Interface Driver
[    5.106357] sdhci-pltfm: SDHCI platform and OF driver helper
[    5.109610] usbcore: registered new interface driver usbhid
[    5.109648] usbhid: USB HID core driver
[    5.126657] NET: Registered PF_PACKET protocol family
[    5.126930] 9pnet: Installing 9P2000 support
[    5.127052] Key type dns_resolver registered
[    5.255118] qcom-qmp-phy 34000.phy: Registered Qcom-QMP phy
[    5.290918] qcom-qmp-phy 627000.phy: Registered Qcom-QMP phy
[    5.351739] qcom-qmp-phy 7410000.phy: Registered Qcom-QMP phy
[    5.383128] qcom-qusb2-phy 7411000.phy: Registered Qcom-QUSB2 phy
[    5.414867] qcom-qusb2-phy 7412000.phy: Registered Qcom-QUSB2 phy
[    7.028460] bam-dma-engine 644000.dma: num-channels unspecified in dt
[    7.030146] bam-dma-engine 644000.dma: num-ees unspecified in dt
[    7.094806] bam-dma-engine 7544000.dma: num-channels unspecified in dt
[    7.095818] bam-dma-engine 7544000.dma: num-ees unspecified in dt
[    7.183339] bam-dma-engine 7584000.dma: num-channels unspecified in dt
[    7.184375] bam-dma-engine 7584000.dma: num-ees unspecified in dt
[    7.282301] msm_serial 7570000.serial: msm_serial: detected port #2
[    7.283966] msm_serial 7570000.serial: uartclk = 19200000
[    7.286552] 7570000.serial: ttyMSM2 at MMIO 0x7570000 (irq = 66, base_baud = 1200000) is a MSM
[    7.296032] serial serial0: tty port ttyMSM2 registered
[    7.326114] msm_serial 75b0000.serial: msm_serial: detected port #0
[    7.327915] msm_serial 75b0000.serial: uartclk = 7372800
[    7.330691] 75b0000.serial: ttyMSM0 at MMIO 0x75b0000 (irq = 70, base_baud = 460800) is a MSM
[    7.332180] msm_serial: console setup on port #0
[    9.181836] printk: console [ttyMSM0] enabled
[    9.225730] arm-smmu b40000.iommu: probing hardware configuration...
[    9.226932] arm-smmu b40000.iommu: SMMUv2 with:
[    9.233517] arm-smmu b40000.iommu:   stage 1 translation
[    9.236445] arm-smmu b40000.iommu:   address translation ops
[    9.242214] arm-smmu b40000.iommu:   non-coherent table walk
[    9.247720] arm-smmu b40000.iommu:   (IDR0.CTTW overridden by FW configuration)
[    9.253472] arm-smmu b40000.iommu:   stream matching with 2 register groups
[    9.262493] arm-smmu b40000.iommu:   2 context banks (0 stage-2 only)
[    9.267878] arm-smmu b40000.iommu:   Supported page sizes: 0x63315000
[    9.274023] arm-smmu b40000.iommu:   Stage-1: 48-bit VA -> 36-bit IPA
[    9.323500] arm-smmu d00000.iommu: probing hardware configuration...
[    9.324552] arm-smmu d00000.iommu: SMMUv2 with:
[    9.330616] arm-smmu d00000.iommu:   stage 1 translation
[    9.334638] arm-smmu d00000.iommu:   address translation ops
[    9.339850] arm-smmu d00000.iommu:   non-coherent table walk
[    9.345401] arm-smmu d00000.iommu:   (IDR0.CTTW overridden by FW configuration)
[    9.351224] arm-smmu d00000.iommu:   stream matching with 2 register groups
[    9.358639] arm-smmu d00000.iommu:   2 context banks (0 stage-2 only)
[    9.365701] arm-smmu d00000.iommu:   Supported page sizes: 0x63315000
[    9.371679] arm-smmu d00000.iommu:   Stage-1: 32-bit VA -> 36-bit IPA
[    9.412307] arm-smmu d40000.iommu: probing hardware configuration...
[    9.414000] arm-smmu d40000.iommu: SMMUv2 with:
[    9.420110] arm-smmu d40000.iommu:   stage 1 translation
[    9.424161] arm-smmu d40000.iommu:   address translation ops
[    9.429288] arm-smmu d40000.iommu:   non-coherent table walk
[    9.434821] arm-smmu d40000.iommu:   (IDR0.CTTW overridden by FW configuration)
[    9.440564] arm-smmu d40000.iommu:   stream matching with 42 register groups
[    9.448305] arm-smmu d40000.iommu:   7 context banks (0 stage-2 only)
[    9.454850] arm-smmu d40000.iommu:   Supported page sizes: 0x63315000
[    9.461259] arm-smmu d40000.iommu:   Stage-1: 32-bit VA -> 36-bit IPA
[    9.549309] arm-smmu da0000.iommu: probing hardware configuration...
[    9.550359] arm-smmu da0000.iommu: SMMUv2 with:
[    9.556451] arm-smmu da0000.iommu:   stage 1 translation
[    9.559928] arm-smmu da0000.iommu:   address translation ops
[    9.565918] arm-smmu da0000.iommu:   non-coherent table walk
[    9.571478] arm-smmu da0000.iommu:   (IDR0.CTTW overridden by FW configuration)
[    9.577258] arm-smmu da0000.iommu:   stream matching with 4 register groups
[    9.584444] arm-smmu da0000.iommu:   2 context banks (0 stage-2 only)
[    9.591236] arm-smmu da0000.iommu:   Supported page sizes: 0x63315000
[    9.597493] arm-smmu da0000.iommu:   Stage-1: 32-bit VA -> 36-bit IPA
[    9.643523] arm-smmu 1600000.iommu: probing hardware configuration...
[    9.644598] arm-smmu 1600000.iommu: SMMUv2 with:
[    9.650678] arm-smmu 1600000.iommu:  stage 1 translation
[    9.655125] arm-smmu 1600000.iommu:  address translation ops
[    9.660421] arm-smmu 1600000.iommu:  non-coherent table walk
[    9.666013] arm-smmu 1600000.iommu:  (IDR0.CTTW overridden by FW configuration)
[    9.671863] arm-smmu 1600000.iommu:  stream matching with 15 register groups
[    9.679151] arm-smmu 1600000.iommu:  12 context banks (0 stage-2 only)
[    9.686696] arm-smmu 1600000.iommu:  Supported page sizes: 0x63315000
[    9.692454] arm-smmu 1600000.iommu:  Stage-1: 36-bit VA -> 36-bit IPA
[    9.959254] ufshcd-qcom 624000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
[    9.998387] ufshcd-qcom 624000.ufshc: Failed to get reset control -2
[   10.035261] scsi host0: ufshcd
[   10.054551] ufshcd-qcom 624000.ufshc: ufs_qcom_host_reset: reset control not set
[   10.134177] spi_qup 7575000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[   10.146008] spi_qup 75ba000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[   10.160933] dwc3-qcom 76f8800.usb: IRQ hs_phy_irq not found
[   10.160995] dwc3-qcom 76f8800.usb: IRQ dp_hs_phy_irq not found
[   10.165367] dwc3-qcom 76f8800.usb: IRQ dm_hs_phy_irq not found
[   10.171284] dwc3-qcom 76f8800.usb: IRQ ss_phy_irq not found
[   10.183641] i2c_qup 7577000.i2c: using default clock-frequency 100000
[   10.191222] ufshcd_get_max_icc_level: Couldn't find valid icc_level = 0
[   10.191955] scsi 0:0:0:49488: Well-known LUN    TOSHIBA  THGBF7G8K4LBATRB 0300 PQ: 0 ANSI: 6
[   10.192992] i2c_qup 75b5000.i2c: using default clock-frequency 100000
[   10.204519] scsi 0:0:0:49476: Well-known LUN    TOSHIBA  THGBF7G8K4LBATRB 0300 PQ: 0 ANSI: 6
[   10.215990] scsi 0:0:0:49456: Well-known LUN    TOSHIBA  THGBF7G8K4LBATRB 0300 PQ: 0 ANSI: 6
[   10.224860] scsi 0:0:0:0: Direct-Access     TOSHIBA  THGBF7G8K4LBATRB 0300 PQ: 0 ANSI: 6
[   10.232510] scsi 0:0:0:1: Direct-Access     TOSHIBA  THGBF7G8K4LBATRB 0300 PQ: 0 ANSI: 6
[   10.233903] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 576000 KHz, changing to: 652800 KHz
[   10.247226] cpufreq: cpufreq_online: CPU2: Running at unlisted initial frequency: 19200 KHz, changing to: 307200 KHz
[   10.247926] scsi 0:0:0:2: Direct-Access     TOSHIBA  THGBF7G8K4LBATRB 0300 PQ: 0 ANSI: 6
[   10.268184] sd 0:0:0:0: [sda] 6335488 4096-byte logical blocks: (26.0 GB/24.2 GiB)
[   10.268467] sdhci_msm 74a4900.sdhci: Got CD GPIO
[   10.274690] sd 0:0:0:1: [sdb] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
[   10.275103] sd 0:0:0:0: [sda] Write Protect is off
[   10.275484] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[   10.275763] sd 0:0:0:0: [sda] Optimal transfer size 65536 bytes
[   10.276437] scsi 0:0:0:3: Direct-Access     TOSHIBA  THGBF7G8K4LBATRB 0300 PQ: 0 ANSI: 6
[   10.278025] scsi 0:0:0:4: Direct-Access     TOSHIBA  THGBF7G8K4LBATRB 0300 PQ: 0 ANSI: 6
[   10.280005] scsi 0:0:0:5: Direct-Access     TOSHIBA  THGBF7G8K4LBATRB 0300 PQ: 0 ANSI: 6
[   10.282279]  sda: sda1
[   10.284231] sd 0:0:0:5: [sdf] 393216 4096-byte logical blocks: (1.61 GB/1.50 GiB)
[   10.284496] sd 0:0:0:5: [sdf] Write Protect is off
[   10.284654] sd 0:0:0:2: [sdc] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
[   10.284876] sd 0:0:0:5: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA
[   10.284996] sd 0:0:0:2: [sdc] Write Protect is off
[   10.285145] sd 0:0:0:5: [sdf] Optimal transfer size 65536 bytes
[   10.285485] sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
[   10.285785] sd 0:0:0:2: [sdc] Optimal transfer size 65536 bytes
[   10.287264] sd 0:0:0:1: [sdb] Write Protect is off
[   10.287587] sd 0:0:0:3: [sdd] 32768 4096-byte logical blocks: (134 MB/128 MiB)
[   10.287895] sd 0:0:0:3: [sdd] Write Protect is off
[   10.288430] sd 0:0:0:3: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
[   10.288716] sd 0:0:0:3: [sdd] Optimal transfer size 65536 bytes
[   10.297893] qcom-pcie 600000.pcie: host bridge /soc/agnoc@0/pcie@600000 ranges:
[   10.307381] sd 0:0:0:4: [sde] 1048576 4096-byte logical blocks: (4.29 GB/4.00 GiB)
[   10.307883] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[   10.307908] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
[   10.308049] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f665 hci version 0x100 quirks 0x0000000002010010
[   10.308098] xhci-hcd xhci-hcd.1.auto: irq 94, io mem 0x07600000
[   10.308593] qcom-pcie 600000.pcie:       IO 0x000c200000..0x000c2fffff -> 0x000c200000
[   10.308616] qcom-pcie 600000.pcie:      MEM 0x000c300000..0x000cffffff -> 0x000c300000
[   10.308867] hub 1-0:1.0: USB hub found
[   10.308895] hub 1-0:1.0: 1 port detected
[   10.309140] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[   10.309153] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
[   10.309163] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[   10.309226] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[   10.309686] hub 2-0:1.0: USB hub found
[   10.309712] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
[   10.310330] sd 0:0:0:0: [sda] Attached SCSI disk
[   10.312272]  sdc: sdc1
[   10.313577] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
[   10.315264] sd 0:0:0:2: [sdc] Attached SCSI disk
[   10.315476]  sdf: sdf1 sdf2 sdf3 sdf4 sdf5 sdf6 sdf7 sdf8 sdf9
[   10.316263]  sdd: sdd1 sdd2 sdd3
[   10.319077] sd 0:0:0:5: [sdf] Attached SCSI disk
[   10.320185] sd 0:0:0:3: [sdd] Attached SCSI disk
[   10.321040] genirq: irq_chip msmgpio did not update eff. affinity mask of irq 95
[   10.321120] mmc0: SDHCI controller on 74a4900.sdhci [74a4900.sdhci] using ADMA 64-bit
[   10.321650] sd 0:0:0:4: [sde] Write Protect is off
[   10.329728] sd 0:0:0:1: [sdb] Optimal transfer size 65536 bytes
[   10.354893]  sdb: sdb1
[   10.359711] sd 0:0:0:4: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA
[   10.370625] sd 0:0:0:1: [sdb] Attached SCSI disk
[   10.372743] sd 0:0:0:4: [sde] Optimal transfer size 65536 bytes
[   10.494478] qcom-pcie 600000.pcie: iATU unroll: disabled
[   10.503241]  sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27 sde28 sde29 sde30
[   10.503662] qcom-pcie 600000.pcie: Detected iATU regions: 32 outbound, 8 inbound
[   10.519966] sd 0:0:0:4: [sde] Attached SCSI disk
[   10.622200] qcom-pcie 600000.pcie: Link up
[   10.649055] qcom-pcie 600000.pcie: PCI host bridge to bus 0000:00
[   10.652790] pci_bus 0000:00: root bus resource [bus 00-ff]
[   10.658995] pci_bus 0000:00: root bus resource [io  0x0000-0xfffff] (bus address [0xc200000-0xc2fffff])
[   10.664334] pci_bus 0000:00: root bus resource [mem 0x0c300000-0x0cffffff]
[   10.673655] pci 0000:00:00.0: [17cb:0104] type 01 class 0x060400
[   10.680614] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff]
[   10.686844] pci 0000:00:00.0: PME# supported from D0 D3hot
[   10.696713] pci 0000:01:00.0: [168c:003e] type 00 class 0x028000
[   10.698378] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[   10.705233] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[   10.724157] pci 0000:00:00.0: BAR 14: assigned [mem 0x0c400000-0x0c5fffff]
[   10.724198] pci 0000:00:00.0: BAR 0: assigned [mem 0x0c300000-0x0c300fff]
[   10.729968] pci 0000:01:00.0: BAR 0: assigned [mem 0x0c400000-0x0c5fffff 64bit]
[   10.736873] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[   10.743918] pci 0000:00:00.0:   bridge window [mem 0x0c400000-0x0c5fffff]
[   10.751120] pcieport 0000:00:00.0: PME: Signaling with IRQ 97
[   10.757265] qcom-pcie 608000.pcie: supply vddpe-3v3 not found, using dummy regulator
[   10.762034] qcom-pcie 608000.pcie: host bridge /soc/agnoc@0/pcie@608000 ranges:
[   10.769649] qcom-pcie 608000.pcie:       IO 0x000d200000..0x000d2fffff -> 0x000d200000
[   10.776663] qcom-pcie 608000.pcie:      MEM 0x000d300000..0x000dffffff -> 0x000d300000
[   10.894470] qcom-pcie 608000.pcie: iATU unroll: disabled
[   10.894556] qcom-pcie 608000.pcie: Detected iATU regions: 32 outbound, 8 inbound
[   11.898175] qcom-pcie 608000.pcie: Phy link never came up
[   11.898632] qcom-pcie 608000.pcie: PCI host bridge to bus 0001:00
[   11.902771] pci_bus 0001:00: root bus resource [bus 00-ff]
[   11.908732] pci_bus 0001:00: root bus resource [io  0x100000-0x1fffff] (bus address [0xd200000-0xd2fffff])
[   11.914118] pci_bus 0001:00: root bus resource [mem 0x0d300000-0x0dffffff]
[   11.923798] pci 0001:00:00.0: [17cb:0104] type 01 class 0x060400
[   11.930619] pci 0001:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff]
[   11.936918] pci 0001:00:00.0: PME# supported from D0 D3hot
[   11.958562] pci 0001:00:00.0: BAR 0: assigned [mem 0x0d300000-0x0d300fff]
[   11.958632] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[   11.967884] pcieport 0001:00:00.0: PME: Signaling with IRQ 99
[   11.971192] qcom-pcie 610000.pcie: supply vddpe-3v3 not found, using dummy regulator
[   11.975740] qcom-pcie 610000.pcie: host bridge /soc/agnoc@0/pcie@610000 ranges:
[   11.983172] qcom-pcie 610000.pcie:       IO 0x000e200000..0x000e2fffff -> 0x000e200000
[   11.990226] qcom-pcie 610000.pcie:      MEM 0x000e300000..0x000fffffff -> 0x000e300000
[   12.106512] qcom-pcie 610000.pcie: iATU unroll: disabled
[   12.106551] qcom-pcie 610000.pcie: Detected iATU regions: 32 outbound, 8 inbound
[   12.211086] qcom-pcie 610000.pcie: Link up
[   12.211339] qcom-pcie 610000.pcie: PCI host bridge to bus 0002:00
[   12.214144] pci_bus 0002:00: root bus resource [bus 00-ff]
[   12.220283] pci_bus 0002:00: root bus resource [io  0x200000-0x2fffff] (bus address [0xe200000-0xe2fffff])
[   12.225676] pci_bus 0002:00: root bus resource [mem 0x0e300000-0x0fffffff]
[   12.235349] pci 0002:00:00.0: [17cb:0104] type 01 class 0x060400
[   12.242174] pci 0002:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff]
[   12.248430] pci 0002:00:00.0: PME# supported from D0 D3hot
[   12.260923] pci 0002:01:00.0: [1969:1083] type 00 class 0x020000
[   12.261122] pci 0002:01:00.0: reg 0x10: [mem 0x00000000-0x0003ffff 64bit]
[   12.266113] pci 0002:01:00.0: reg 0x18: [io  0x0000-0x007f]
[   12.272980] pci 0002:01:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
[   12.278488] pci 0002:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[   12.307856] pci 0002:00:00.0: BAR 14: assigned [mem 0x0e300000-0x0e3fffff]
[   12.307960] pci 0002:00:00.0: BAR 0: assigned [mem 0x0e400000-0x0e400fff]
[   12.313894] pci 0002:00:00.0: BAR 13: assigned [io  0x200000-0x200fff]
[   12.320540] pci 0002:01:00.0: BAR 0: assigned [mem 0x0e300000-0x0e33ffff 64bit]
[   12.327054] pci 0002:01:00.0: BAR 2: assigned [io  0x200000-0x20007f]
[   12.334200] pci 0002:00:00.0: PCI bridge to [bus 01-ff]
[   12.340756] pci 0002:00:00.0:   bridge window [io  0x200000-0x200fff]
[   12.345794] pci 0002:00:00.0:   bridge window [mem 0x0e300000-0x0e3fffff]
[   12.354340] pcieport 0002:00:00.0: PME: Signaling with IRQ 101
[   12.359432] atl1c 0002:01:00.0: enabling device (0000 -> 0002)
[   12.427602] adreno b00000.gpu: Adding to iommu group 0
[   12.429368] msm_mdp 901000.mdp: Adding to iommu group 1
[   12.436036] msm 900000.mdss: supply vdd not found, using dummy regulator
[   12.437379] msm_mdp 901000.mdp: [drm:mdp5_bind] MDP5 version v1.7
[   12.443913] msm 900000.mdss: bound 901000.mdp (ops mdp5_ops)
[   12.451570] msm 900000.mdss: bound 9a0000.hdmi-tx (ops msm_hdmi_ops)
[   12.456822] qcom-cpr3-gfx 838000.power-controller: thread 0 initialized with 7 OPPs
[   12.463673] adreno b00000.gpu: supply vdd not found, using dummy regulator
[   12.469432] adreno b00000.gpu: supply vddcx not found, using dummy regulator
[   12.480697] msm 900000.mdss: bound b00000.gpu (ops a3xx_ops)
[   12.635950] [drm] Initialized msm 1.8.0 20130625 for 900000.mdss on minor 0
[   12.636719] msm 900000.mdss: [drm:adreno_request_fw] loaded qcom/a530_pm4.fw from new location
[   12.641918] msm 900000.mdss: [drm:adreno_request_fw] loaded qcom/a530_pfp.fw from new location
[   12.650610] msm 900000.mdss: [drm:adreno_request_fw] loaded qcom/a530v3_gpmu.fw2 from new location
[   12.660093] msm 900000.mdss: [drm:adreno_request_fw] loaded qcom/a530_zap.mdt from new location
[   12.677484] msm 900000.mdss: [drm] Cannot find any crtc or sizes
[   12.680481] dwc3-qcom 6af8800.usb: IRQ dp_hs_phy_irq not found
[   12.682828] dwc3-qcom 6af8800.usb: IRQ dm_hs_phy_irq not found
[   12.703763] qcom-venus c00000.video-codec: Adding to iommu group 2
[   12.784317] inð[   12.791997] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[   12.792039] EXT4-fs (sda1): write access will be enabled during recovery
[   12.798310] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
[   12.804694] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 3
[   12.810164] xhci-hcd xhci-hcd.3.auto: hcc params 0x0228f665 hci version 0x100 quirks 0x0000000002010010
[   12.817580] xhci-hcd xhci-hcd.3.auto: irq 104, io mem 0x06a00000
[   12.828157] hub 3-0:1.0: USB hub found
[   12.833181] hub 3-0:1.0: 1 port detected
[   12.837009] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
[   12.839945] EXT4-fs (sda1): orphan cleanup on readonly fs
[   12.840764] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 4
[   12.846238] EXT4-fs (sda1): 1 orphan inode deleted
[   12.851542] xhci-hcd xhci-hcd.3.auto: Host supports USB 3.0 SuperSpeed
[   12.858979] EXT4-fs (sda1): recovery complete
[   12.863911] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[   12.875543] hub 4-0:1.0: USB hub found
[   12.877701] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[   12.882980] hub 4-0:1.0: 1 port detected
[   12.886575] VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
[   12.902891] devtmpfs: mounted
[   12.906919] Freeing unused kernel memory: 3008K
[   12.909545] Run /sbin/init as init process
[   13.075209] systemd[1]: System time before build time, advancing clock.
[   13.092774] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[   13.144212] NET: Registered PF_INET6 protocol family
[   13.146326] Segment Routing with IPv6
[   13.148293] In-situ OAM (IOAM) with IPv6

Welcome to Debian GNU/Linux 10 (buster)!

Failed to bump fs.file-max, ignoring: Invalid argument
[   13.312919] hub 3-1:1.0: USB hub found
[   13.313298] hub 3-1:1.0: 4 ports detected
[   13.369013] usb 4-1: new SuperSpeed USB device number 2 using xhci-hcd
[   13.425163] hub 4-1:1.0: USB hub found
[   13.425770] hub 4-1:1.0: 4 ports detected
File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[   13.696934] msm 900000.mdss: [drm] Cannot find any crtc or sizes
Configuration file /lib/systemd/system/qrtr-ns.service is marked executable. Please remove executable permission bits. Proceeding anyway.
[   13.788794] random: systemd: uninitialized urandom read (16 bytes read)
[   13.796818] random: systemd: uninitialized urandom read (16 bytes read)
[   13.798396] random: systemd: uninitialized urandom read (16 bytes read)
[  OK  ] Listening on udev Control Socket.
[  OK  ] Started Forward Password R…uests to Wall Directory Watch.
[  OK  ] Listening on Journal Socket (/dev/log).
[  OK  ] Listening on Journal Audit Socket.
[  OK  ] Listening on Journal Socket.
         Mounting POSIX Message Queue File System...
         Mounting Huge Pages File System...
[  OK  ] Created slice system-getty.slice.
[  OK  ] Listening on fsck to fsckd communication Socket.
         Starting File System Check on Root Device...
[  OK  ] Started Dispatch Password …ts to Console Directory Watch.
[  OK  ] Reached target Local Encrypted Volumes.
         Starting Set the console keyboard layout...
         Starting Nameserver information manager...
         Mounting Kernel Debug File System...
[  OK  ] Listening on Syslog Socket.
         Starting Journal Service...
[  OK  ] Listening on udev Kernel Socket.
         Starting udev Coldplug all Devices...
[  OK  ] Created slice system-serial\x2dgetty.slice.
[  OK  ] Reached target Paths.
[  OK  ] Created slice User and Session Slice.
[  OK  ] Reached target Slices.
         Starting Load Kernel Modules...
[  OK  ] Listening on initctl Compatibility Named Pipe.
[  OK  ] Reached target Swap.
         Starting Create list of re…odes for the current kernel...
[  OK  ] Reached target Remote File Systems.
[  OK  ] Mounted POSIX Message Queue File System.
[  OK  ] Mounted Huge Pages File System.
[  OK  ] Mounted Kernel Debug File System.
[  OK  ] Started File System Check Daemon to report status.
[  OK  ] Started Load Kernel Modules.
[  OK  ] Started Create list of req… nodes for the current kernel.
[  OK  ] Started Nameserver information manager.
         Mounting Kernel Configuration File System...
         Starting Apply Kernel Variables...
[  OK  ] Started File System Check on Root Device.
[  OK  ] Mounted Kernel Configuration File System.
         Starting Remount Root and Kernel File Systems...
[  OK  ] Started Apply Kernel Variables.
[  OK  ] Started Set the console keyboard layout.
[   14.981184] random: systemd-journal: uninitialized urandom read (16 bytes read)
[   14.981618] random: systemd-journal: uninitialized urandom read (16 bytes read)
[   14.990336] random: systemd-journal: uninitialized urandom read (16 bytes read)
[  OK  ] Started Journal Service.
[   15.087450] EXT4-fs (sda1): re-mounted. Opts: data=ordered. Quota mode: none.
[  OK  ] Started Remount Root and Kernel File Systems.
         Starting Create System Users...
         Starting Load/Save Random Seed...
         Starting Flush Journal to Persistent Storage...
[  OK  ] Started Create System Users.
[  OK  ] Started Load/Save Random Seed.
         Starting Create Static Device Nodes in /dev...
[   15.335775] systemd-journald[203]: Received request to flush runtime journal from PID 1
[  OK  ] Started Flush Journal to Persistent Storage.
[  OK  ] Started Create Static Device Nodes in /dev.
         Starting udev Kernel Device Manager...
[  OK  ] Reached target Local File Systems (Pre).
[  OK  ] Reached target Local File Systems.
         Starting Create Volatile Files and Directories...
         Starting Set console font and keymap...
[  OK  ] Started Set console font and keymap.
[  OK  ] Started udev Kernel Device Manager.
[  OK  ] Started Create Volatile Files and Directories.
         Starting Network Time Synchronization...
         Starting Update UTMP about System Boot/Shutdown...
[  OK  ] Started Update UTMP about System Boot/Shutdown.
[   16.154278] random: systemd-journal: uninitialized urandom read (16 bytes read)
[  OK  ] Started Network Time Synchronization.
[   16.178636] random: systemd: uninitialized urandom read (16 bytes read)
[  OK  ] Reached target System Time Synchronized.
[   16.921474] random: systemd: uninitialized urandom read (16 bytes read)
[   17.586918] random: systemd: uninitialized urandom read (16 bytes read)
[  OK  ] Started udev Coldplug all Devices.
[  OK  ] Reached target System Initialization.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Started Daily rotation of log files.
[  OK  ] Listening on GPS (Global P…ioning System) Daemon Sockets.
[  OK  ] Reached target Sockets.
[  OK  ] Reached target Basic System.
         Starting Restore /etc/reso… the ppp link was shut down...
         Starting System Logging Service...
         Starting Modem Manager...
[  OK  ] Started Regular background program processing daemon.
         Starting LSB: Load kernel …d to enable cpufreq scaling...
         Starting Initialize hardware monitoring sensors...
[   18.792325] rtc-pm8xxx 400f000.qcom,spmi:pmic@0:rtc@6000: registered as rtc0
[   18.792505] rtc-pm8xxx 400f000.qcom,spmi:pmic@0:rtc@6000: setting system clock to 1970-01-01T00:00:20 UTC (20)
         Starting Login Service...
[  OK  ] Started D-Bus System Message Bus.
         Starting Network Manager...
         Starting Disk Manager...
[  OK  ] Started Daily Cleanup of Temporary Directories.
[  OK  ] Started Daily apt download activities.
[  OK  ] Started Daily apt upgrade and clean activities.
[  OK  ] Started Trigger anacron every hour.
[  OK  ] Reached target Timers.
[  OK  ] Started Run anacron jobs.
[  OK  ] Started QIPCRTR Name Service.
[  OK  ] Started Qualcomm remotefs service.
         Starting WPA supplicant...
         Starting Helper to synchronize boot up for ifupdown...
[  OK  ] Started System Logging Service.
[  OK  ] Started Restore /etc/resol…re the ppp link was shut down.
[  OK  ] Started Helper to synchronize boot up for ifupdown.
[  OK  ] Started Initialize hardware monitoring sensors.
[   21.509963] qcom_q6v5_pas 9300000.remoteproc: supply cx not found, using dummy regulator
[   21.510807] qcom_q6v5_pas 9300000.remoteproc: supply px not found, using dummy regulator
[   21.553679] remoteproc remoteproc0: 9300000.remoteproc is available
[   21.555477] remoteproc remoteproc0: Direct firmware load for qcom/apq8096/adsp.mbn failed with error -2
[   21.564761] remoteproc remoteproc0: Falling back to sysfs fallback for: qcom/apq8096/adsp.mbn
[  OK  ] Started LSB: Load kernel m…ded to enable cpufreq scaling.
[   22.324466] atl1c 0002:01:00.0 enP2p1s0: renamed from eth0
[   22.813577] remoteproc remoteproc0: powering up 9300000.remoteproc
[   22.813817] remoteproc remoteproc0: Direct firmware load for qcom/apq8096/adsp.mbn failed with error -2
[   22.819699] remoteproc remoteproc0: Falling back to sysfs fallback for: qcom/apq8096/adsp.mbn
[   22.856032] remoteproc remoteproc0: request_firmware failed: -2
[  OK  ] Found device /dev/ttyMSM0.
         Starting Hostname Service...
         Starting Authorization Manager...
[  OK  ] Listening on Load/Save RF …itch Status /dev/rfkill Watch.
         Starting LSB: set CPUFreq kernel parameters...
         Stopping Qualcomm remotefs service...
         Starting Raise network interfaces...
[  OK  ] Started WPA supplicant.
[  OK  ] Started Login Service.
[  OK  ] Started Network Manager.
[  OK  ] Started Authorization Manager.
[  OK  ] Started Hostname Service.
[  OK  ] Started Modem Manager.
[  OK  ] Started LSB: set CPUFreq kernel parameters.
         Starting Network Manager Script Dispatcher Service...
[  OK  ] Started Network Manager Script Dispatcher Service.
[  OK  ] Started Raise network interfaces.
[  OK  ] Reached target Network.
         Starting /etc/rc.local Compatibility...
         Starting OpenBSD Secure Shell server...
         Starting Permit User Sessions...
[  OK  ] Started /etc/rc.local Compatibility.
[   33.985107] atl1c 0002:01:00.0: atl1c: enP2p1s0 NIC Link is Up<1000 Mbps Full Duplex>
[  OK  ] Started Permit User Sessions.
         Starting Simple Desktop Display Manager...
[  OK  ] Started Getty on tty1.
[  OK  ] Started Serial Getty on ttyMSM0.
[  OK  ] Reached target Login Prompts.
[  OK  ] Started Simple Desktop Display Manager.
[   34.692942] random: crng init done
[   34.693022] random: 461 urandom warning(s) missed due to ratelimiting
[  OK  ] Started OpenBSD Secure Shell server.
[  OK  ] Started Disk Manager.
[   36.390531] broken atomic modeset userspace detected, disabling atomic
[  OK  ] Stopped Qualcomm remotefs service.
[  OK  ] Stopped QIPCRTR Name Service.
[  OK  ] Started QIPCRTR Name Service.
[  OK  ] Started Qualcomm remotefs service.
[  OK  ] Reached target Multi-User System.
[  OK  ] Reached target Graphical Interface.
         Starting Update UTMP about System Runlevel Changes...
         Stopping Qualcomm remotefs service...
[  OK  ] Created slice User Slice of UID 1000.
         Starting User Runtime Directory /run/user/1000...
[  OK  ] Started Update UTMP about System Runlevel Changes.
[  OK  ] Started User Runtime Directory /run/user/1000.
         Starting User Manager for UID 1000...

Debian GNU/Linux 10 linaro-alip ttyMSM0

linaro-alip login: root (automatic login)

Last login: Thu Jan  1 00:04:43 UTC 1970 on ttyMSM0
Linux linaro-alip 5.15.0-qcomlt-arm64 #4 SMP PREEMPT Wed Dec 14 11:57:51 PST 2022 aarch64

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
root@linaro-alip:~#
