Android Bootloader - UART_DM Initialized!!! [0] BUILD_VERSION= [0] BUILD_DATE=15:40:46 - Jul 5 2021 [0] welcome to lk [10] platform_init() [10] target_init() [10] RPM GLink Init [10] Opening RPM Glink Port success [10] Opening SSR Glink Port success [20] Glink Connection between APPS and RPM established [20] Glink Connection between APPS and RPM established [40] UFS init success [40] Qseecom Init Done in Appsbl [40] secure app region addr=0x86600000 size=0x2200000[50] TZ App region notif returned with status:0 addr:86600000 size:35651584 [60] TZ App log region register returned with status:0 addr:916d4000 size:4096 [60] Qseecom TZ Init Done in Appsbl [80] Loading cmnlib done [80] qseecom_start_app: Loading app keymaster for the first time' [110] <8>keymaster: "\"KEYMASTER Init \"" [110] Setting display_panel to none [110] Selected panel: none Skip panel configuration [120] pm8x41_get_is_cold_boot: cold boot [120] Unable to locate /bootselect partition [130] boot_verifier: Device is in ORANGE boot state. [130] Device is unlocked! Skipping verification... [140] Loading (boot) image (27734016): start [240] Loading (boot) image (27734016): done [240] use_signed_kernel=1, is_unlocked=1, is_tampered=0. [250] Your device has been unlocked and can't be trusted. [250] mdtp: mdtp_img loaded [260] mdtp: is_test_mode: test mode is set to 1 [260] mdtp: read_metadata: SUCCESS [280] LK SEC APP Handle: 0x1 [280] Return value from recv_data: 14 [290] Return value from recv_data: 14 [300] Return value from recv_data: 14 [310] decompressing kernel image: start [570] decompressing kernel image: done [580] qcom,msm-id entry not found [580] Only one appended non-skales DTB, select it. [590] cmdline: root=/dev/sda1 rootwait console=ttyMSM0,115200n8 androidboot.bootdevice=624000.ufshc androidboot.verifiedbootstate=orange androidboot.veritymode=enforcing androidboot.serialno=2604fd8c androidboot.baseband=apq mdss_mdp.panel=0 [610] Updating device tree: start [610] Updating device tree: done [610] Return value from recv_data: 14 [620] RPM GLINK UnInit [620] Qseecom De-Init Done in Appsbl [620] booting linux @ 0x80080000, ramdisk @ 0x92493000 (18740546), tags/device tree @ 0x85600000 [630] Jumping to kernel via monitor [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x511f2112] [ 0.000000] Linux version 5.15.0-ifc6601-arm64 (slroot@PDXKSTEINER) ((gcc version 11.2-2022.02 (arm-11.14))) #6 SMP PREEMPT Wed Apr 5 12:51:30 PDT 2023 [ 0.000000] Machine model: Qualcomm Technologies, Inc. DB820c [ 0.000000] efi: UEFI not found. [ 0.000000] [Firmware Bug]: Kernel image misaligned at boot, please fix your bootloader! [ 0.000000] OF: reserved mem: OVERLAP DETECTED! [ 0.000000] gpu@8f200000 (0x0000000090b00000--0x0000000091500000) overlaps with slpi@90b00000 (0x0000000090b00000--0x0000000091500000) [ 0.000000] Reserved memory: created DMA memory pool at 0x0000000090b00000, size 10 MiB [ 0.000000] OF: reserved mem: initialized node gpu@8f200000, compatible id shared-dma-pool [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x000000017e44ffff] [ 0.000000] NUMA: NODE_DATA [mem 0x17dc36c00-0x17dc38fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000017e44ffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000857fffff] [ 0.000000] node 0: [mem 0x0000000085800000-0x00000000916fffff] [ 0.000000] node 0: [mem 0x0000000091700000-0x00000000a1dfffff] [ 0.000000] node 0: [mem 0x00000000a1e00000-0x00000000a1ffffff] [ 0.000000] node 0: [mem 0x00000000a2000000-0x000000017e44ffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000017e44ffff] [ 0.000000] On node 0, zone Normal: 7088 pages in unavailable ranges [ 0.000000] cma: Reserved 32 MiB at 0x00000000fe000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] psci: OSI mode supported. [ 0.000000] psci: failed to set PC mode: -1 [ 0.000000] percpu: Embedded 19 pages/cpu s40664 r8192 d28968 u77824 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Qualcomm Technologies Falkor/Kryo erratum 1003 [ 0.000000] CPU features: detected: Qualcomm erratum 1009, or ARM erratum 1286807 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1025214 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/sda1 rootwait console=ttyMSM0,115200n8 androidboot.bootdevice=624000.ufshc androidboot.verifiedbootstate=orange androidboot.veritymode=enforcing androidboot.serialno=2604fd8c androidboot.baseband=apq mdss_mdp.panel=0 [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000fa000000-0x00000000fe000000] (64MB) [ 0.000000] Memory: 3746980K/4165952K available (12416K kernel code, 1956K rwdata, 5456K rodata, 3200K init, 410K bss, 386204K reserved, 32768K cma-reserved) [ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: enabling workaround for GICv3: Qualcomm MSM8996 broken firmware [ 0.000000] GICv3: 608 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: GICv4 features: [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000009c00000 [ 0.000000] ITS: No ITS available, not enabling LPIs [ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000137] Console: colour dummy device 80x25 [ 0.000209] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [ 0.000223] pid_max: default: 32768 minimum: 301 [ 0.000280] LSM: Security Framework initializing [ 0.000371] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.000387] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.001980] rcu: Hierarchical SRCU implementation. [ 0.003363] EFI services will not be available. [ 0.003711] smp: Bringing up secondary CPUs ... [ 0.004599] Detected PIPT I-cache on CPU1 [ 0.004640] GICv3: CPU1: found redistributor 1 region 0:0x0000000009c40000 [ 0.004696] CPU1: Booted secondary processor 0x0000000001 [0x511f2112] [ 0.008411] Detected PIPT I-cache on CPU2 [ 0.009559] GICv3: CPU2: found redistributor 100 region 0:0x0000000009c80000 [ 0.010804] CPU2: Booted secondary processor 0x0000000100 [0x511f2052] [ 0.019258] Detected PIPT I-cache on CPU3 [ 0.020336] GICv3: CPU3: found redistributor 101 region 0:0x0000000009cc0000 [ 0.021519] CPU3: Booted secondary processor 0x0000000101 [0x511f2052] [ 0.025210] smp: Brought up 1 node, 4 CPUs [ 0.025278] SMP: Total of 4 processors activated. [ 0.025300] CPU features: detected: 32-bit EL0 Support [ 0.025306] CPU features: detected: 32-bit EL1 Support [ 0.025318] CPU features: detected: CRC32 instructions [ 0.121469] CPU: All CPU(s) started at EL1 [ 0.122403] alternatives: patching kernel code [ 0.130387] devtmpfs: initialized [ 0.143039] KASLR disabled due to lack of seed [ 0.143266] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.143287] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.143928] pinctrl core: initialized pinctrl subsystem [ 0.144617] DMI not present or invalid. [ 0.145516] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.151511] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations [ 0.152774] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.153574] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.153644] audit: initializing netlink subsys (disabled) [ 0.154496] audit: type=2000 audit(0.152:1): state=initialized audit_enabled=0 res=1 [ 0.154799] thermal_sys: Registered thermal governor 'step_wise' [ 0.154816] thermal_sys: Registered thermal governor 'power_allocator' [ 0.157006] cpuidle: using governor menu [ 0.157107] NET: Registered PF_QIPCRTR protocol family [ 0.157261] hw-breakpoint: found 8 breakpoint and 4 watchpoint registers. [ 0.159296] ASID allocator initialised with 32768 entries [ 0.160563] Serial: AMBA PL011 UART driver [ 0.182343] platform 627000.phy: Fixing up cyclic dependency with 624000.ufshc [ 0.204805] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.204829] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.204836] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.204843] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.207360] cryptd: max_cpu_qlen set to 1000 [ 0.216433] iommu: Default domain type: Translated [ 0.216453] iommu: DMA domain TLB invalidation policy: strict mode [ 0.219742] vgaarb: loaded [ 0.220021] SCSI subsystem initialized [ 0.221009] usbcore: registered new interface driver usbfs [ 0.221041] usbcore: registered new interface driver hub [ 0.221077] usbcore: registered new device driver usb [ 0.221540] pps_core: LinuxPPS API ver. 1 registered [ 0.221550] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.221566] PTP clock support registered [ 0.221699] EDAC MC: Ver: 3.0.0 [ 0.223624] psci: failed to set OSI mode: -1 [ 0.224073] qcom_scm: convention: smc arm 64 [ 0.241993] vreg_s3a_1p3: Bringing 0uV into 1300000-1300000uV [ 0.242156] vreg_s3a_1p3: supplied by vph_pwr [ 0.242238] vreg_s4a_1p8: Bringing 0uV into 1800000-1800000uV [ 0.242261] vreg_s4a_1p8: supplied by vph_pwr [ 0.242515] vreg_s5a_2p15: Bringing 0uV into 2150000-2150000uV [ 0.242623] vreg_s5a_2p15: supplied by vph_pwr [ 0.242700] vreg_s7a_1p0: Bringing 0uV into 800000-800000uV [ 0.242811] vreg_s7a_1p0: supplied by vph_pwr [ 0.242877] vreg_l1a_1p0: Bringing 0uV into 1000000-1000000uV [ 0.242903] FPGA manager framework [ 0.243017] vreg_l2a_1p25: Bringing 0uV into 1250000-1250000uV [ 0.243163] vreg_l2a_1p25: supplied by vreg_s3a_1p3 [ 0.243242] vreg_l3a_0p875: Bringing 0uV into 850000-850000uV [ 0.243367] vreg_l3a_0p875: supplied by vreg_s3a_1p3 [ 0.243440] vreg_l4a_1p225: Bringing 0uV into 1225000-1225000uV [ 0.243559] vreg_l4a_1p225: supplied by vreg_s3a_1p3 [ 0.243632] vreg_l6a_1p2: Bringing 0uV into 1200000-1200000uV [ 0.243763] vreg_l6a_1p2: supplied by vreg_s5a_2p15 [ 0.243843] vreg_l8a_1p8: Bringing 0uV into 1800000-1800000uV [ 0.243966] vreg_l8a_1p8: supplied by vph_pwr [ 0.244036] vreg_l9a_1p8: Bringing 0uV into 1800000-1800000uV [ 0.244191] vreg_l10a_1p8: Bringing 0uV into 1800000-1800000uV [ 0.244358] vreg_l11a_1p15: Bringing 0uV into 1150000-1150000uV [ 0.244487] vreg_l11a_1p15: supplied by vreg_s3a_1p3 [ 0.244565] vreg_l12a_1p8: Bringing 0uV into 1800000-1800000uV [ 0.244705] vreg_l12a_1p8: supplied by vreg_s5a_2p15 [ 0.244781] vreg_l13a_2p95: Bringing 0uV into 1800000-1800000uV [ 0.244965] vreg_l14a_1p8: Bringing 0uV into 1800000-1800000uV [ 0.245112] vreg_l14a_1p8: supplied by vreg_s5a_2p15 [ 0.245191] vreg_l15a_1p8: Bringing 0uV into 1800000-1800000uV [ 0.245354] vreg_l15a_1p8: supplied by vreg_s5a_2p15 [ 0.245431] vreg_l16a_2p7: Bringing 0uV into 2700000-2700000uV [ 0.245661] vreg_l16a_2p7: supplied by vph_pwr [ 0.245752] vreg_l17a_2p8: Bringing 0uV into 2500000-2500000uV [ 0.245954] vreg_l18a_2p85: Bringing 0uV into 2700000-2700000uV [ 0.246167] vreg_l19a_2p8: Bringing 0uV into 3000000-3000000uV [ 0.246889] clocksource: Switched to clocksource arch_sys_counter [ 0.246995] vreg_l20a_2p95: Bringing 0uV into 2950000-2950000uV [ 0.247034] VFS: Disk quotas dquot_6.6.0 [ 0.247072] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.247287] vreg_l21a_2p95: Bringing 0uV into 2950000-2950000uV [ 0.247563] vreg_l22a_3p0: Bringing 0uV into 3300000-3300000uV [ 0.247841] vreg_l23a_2p8: Bringing 0uV into 2800000-2800000uV [ 0.248132] vreg_l24a_3p075: Bringing 0uV into 3075000-3075000uV [ 0.248440] vreg_l25a_1p2: Bringing 0uV into 1200000-1200000uV [ 0.248713] vreg_l25a_1p2: supplied by vreg_s3a_1p3 [ 0.248803] vreg_l26a_0p8: Bringing 0uV into 1000000-1000000uV [ 0.249072] vreg_l26a_0p8: supplied by vreg_s3a_1p3 [ 0.249156] vreg_l28a_0p925: Bringing 0uV into 925000-925000uV [ 0.249432] vreg_l28a_0p925: supplied by vreg_s3a_1p3 [ 0.249565] vreg_l29a_2p8: Bringing 0uV into 2800000-2800000uV [ 0.249933] vreg_l30a_1p8: Bringing 0uV into 1800000-1800000uV [ 0.250248] vreg_l30a_1p8: supplied by vph_pwr [ 0.250339] vreg_l32a_1p8: Bringing 0uV into 1800000-1800000uV [ 0.250652] vreg_l32a_1p8: supplied by vreg_s5a_2p15 [ 0.251094] vreg_lvs1a_1p8: supplied by vreg_s4a_1p8 [ 0.251486] vreg_lvs2a_1p8: supplied by vreg_s4a_1p8 [ 0.251924] vph_pwr_bbyp: Bringing 0uV into 3300000-3300000uV [ 0.252279] vph_pwr_bbyp: supplied by vph_pwr [ 0.252346] vreg_s1b_1p025: Bringing 0uV into 1025000-1025000uV [ 0.252688] vreg_s1b_1p025: supplied by vph_pwr [ 0.372289] NET: Registered PF_INET protocol family [ 0.372418] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.375257] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.375288] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.375300] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.375369] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.375482] TCP: Hash tables configured (established 32768 bind 32768) [ 0.375592] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.375635] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.375766] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.377684] RPC: Registered named UNIX socket transport module. [ 0.377698] RPC: Registered udp transport module. [ 0.377703] RPC: Registered tcp transport module. [ 0.377709] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.377720] PCI: CLS 0 bytes, default 64 [ 0.378664] Unpacking initramfs... [ 0.382111] kvm [1]: HYP mode not available [ 0.402666] workingset: timestamp_bits=42 max_order=20 bucket_order=0 [ 0.408382] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.409692] NFS: Registering the id_resolver key type [ 0.409737] Key type id_resolver registered [ 0.409744] Key type id_legacy registered [ 0.409823] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.409831] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.412250] 9p: Installing v9fs 9p2000 file system support [ 0.472061] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.472078] io scheduler mq-deadline registered [ 0.472085] io scheduler kyber registered [ 0.499233] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.504690] msm_serial: driver initialized [ 0.533633] loop: module loaded [ 0.535862] megasas: 07.717.02.00-rc1 [ 0.544256] spmi spmi-0: PMIC arbiter version v2 (0x20010000) [ 0.560476] vreg_l1a_1p0: supplied by vreg_s1b_1p025 [ 0.560732] vreg_l9a_1p8: supplied by vph_pwr_bbyp [ 0.560978] vreg_l10a_1p8: supplied by vph_pwr_bbyp [ 0.561199] vreg_l13a_2p95: supplied by vph_pwr_bbyp [ 0.561418] vreg_l17a_2p8: supplied by vph_pwr_bbyp [ 0.561642] vreg_l18a_2p85: supplied by vph_pwr_bbyp [ 0.561856] vreg_l19a_2p8: supplied by vph_pwr_bbyp [ 0.562099] vreg_l20a_2p95: supplied by vph_pwr_bbyp [ 0.562313] vreg_l21a_2p95: supplied by vph_pwr_bbyp [ 0.562528] vreg_l22a_3p0: supplied by vph_pwr_bbyp [ 0.562810] vreg_l23a_2p8: supplied by vph_pwr_bbyp [ 0.563028] vreg_l24a_3p075: supplied by vph_pwr_bbyp [ 0.563264] vreg_l29a_2p8: supplied by vph_pwr_bbyp [ 0.563505] s1: supplied by regulator-dummy [ 0.564182] s2: supplied by regulator-dummy [ 0.564843] s3: supplied by regulator-dummy [ 0.565541] s4: supplied by regulator-dummy [ 0.566210] s5: supplied by regulator-dummy [ 0.567343] s7: supplied by regulator-dummy [ 0.568025] s8: supplied by regulator-dummy [ 0.568699] s11: supplied by regulator-dummy [ 0.569393] s12: supplied by regulator-dummy [ 0.570083] l1: supplied by regulator-dummy [ 0.570814] l2: supplied by regulator-dummy [ 0.571518] l3: supplied by regulator-dummy [ 0.572212] l4: supplied by regulator-dummy [ 0.572906] l6: supplied by regulator-dummy [ 0.573623] l7: supplied by regulator-dummy [ 0.574336] l8: supplied by regulator-dummy [ 0.575133] l9: supplied by regulator-dummy [ 0.575866] l10: supplied by regulator-dummy [ 0.576567] l11: supplied by regulator-dummy [ 0.577286] l12: supplied by regulator-dummy [ 0.578032] l13: supplied by regulator-dummy [ 0.578769] l14: supplied by regulator-dummy [ 0.579499] l15: supplied by regulator-dummy [ 0.580237] l16: supplied by regulator-dummy [ 0.580974] l17: supplied by regulator-dummy [ 0.581709] l18: supplied by regulator-dummy [ 0.582460] l19: supplied by regulator-dummy [ 0.583255] l20: supplied by regulator-dummy [ 0.584001] l21: supplied by regulator-dummy [ 0.584765] l22: supplied by regulator-dummy [ 0.585511] l23: supplied by regulator-dummy [ 0.586293] l24: supplied by regulator-dummy [ 0.587123] l25: supplied by regulator-dummy [ 0.587884] l26: supplied by regulator-dummy [ 0.588653] l27: supplied by regulator-dummy [ 0.589428] l28: supplied by regulator-dummy [ 0.590241] l29: supplied by regulator-dummy [ 0.591069] l30: supplied by regulator-dummy [ 0.591844] l31: supplied by regulator-dummy [ 0.592611] l32: supplied by regulator-dummy [ 0.593366] lvs1: supplied by regulator-dummy [ 0.594105] lvs2: supplied by regulator-dummy [ 0.603047] s1: supplied by regulator-dummy [ 0.603985] VDD_GFX: supplied by vph_pwr [ 0.604845] l1: supplied by regulator-dummy [ 0.612471] tun: Universal TUN/TAP device driver, 1.6 [ 0.613586] VFIO - User Level meta-driver version: 0.3 [ 0.618428] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.618464] ehci-pci: EHCI PCI platform driver [ 0.618564] ehci-platform: EHCI generic platform driver [ 0.619142] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.619225] ohci-pci: OHCI PCI platform driver [ 0.619332] ohci-platform: OHCI generic platform driver [ 0.620730] usbcore: registered new interface driver usb-storage [ 0.627881] i2c_dev: i2c /dev entries driver [ 0.633221] input: pm8941_pwrkey as /devices/platform/soc/400f000.qcom,spmi/spmi-0/0-00/400f000.qcom,spmi:pmic@0:pon@800/400f000.qcom,spmi:pmic@0:pon@800:pwrkey/input/input0 [ 0.636861] input: pm8941_resin as /devices/platform/soc/400f000.qcom,spmi/spmi-0/0-00/400f000.qcom,spmi:pmic@0:pon@800/400f000.qcom,spmi:pmic@0:pon@800:resin/input/input1 [ 0.670815] sdhci: Secure Digital Host Controller Interface driver [ 0.670854] sdhci: Copyright(c) Pierre Ossman [ 0.672498] Synopsys Designware Multimedia Card Interface Driver [ 0.674390] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.680118] usbcore: registered new interface driver usbhid [ 0.680150] usbhid: USB HID core driver [ 0.701699] NET: Registered PF_PACKET protocol family [ 0.702136] 9pnet: Installing 9P2000 support [ 0.702301] Key type dns_resolver registered [ 0.834388] qcom-qmp-phy 34000.phy: Registered Qcom-QMP phy [ 0.836362] qcom-qmp-phy 627000.phy: Registered Qcom-QMP phy [ 0.839280] qcom-qmp-phy 7410000.phy: Registered Qcom-QMP phy [ 0.841111] qcom-qusb2-phy 7411000.phy: Registered Qcom-QUSB2 phy [ 0.842887] qcom-qusb2-phy 7412000.phy: Registered Qcom-QUSB2 phy [ 0.930435] bam-dma-engine 644000.dma: num-channels unspecified in dt [ 0.930486] bam-dma-engine 644000.dma: num-ees unspecified in dt [ 0.933988] bam-dma-engine 7544000.dma: num-channels unspecified in dt [ 0.934028] bam-dma-engine 7544000.dma: num-ees unspecified in dt [ 0.938751] bam-dma-engine 7584000.dma: num-channels unspecified in dt [ 0.938790] bam-dma-engine 7584000.dma: num-ees unspecified in dt [ 0.944150] msm_serial 7570000.serial: msm_serial: detected port #2 [ 0.944240] msm_serial 7570000.serial: uartclk = 19200000 [ 0.944358] 7570000.serial: ttyMSM2 at MMIO 0x7570000 (irq = 76, base_baud = 1200000) is a MSM [ 0.944775] serial serial0: tty port ttyMSM2 registered [ 0.946312] msm_serial 75b0000.serial: msm_serial: detected port #0 [ 0.946404] msm_serial 75b0000.serial: uartclk = 7372800 [ 0.946506] 75b0000.serial: ttyMSM0 at MMIO 0x75b0000 (irq = 80, base_baud = 460800) is a MSM [ 0.946567] msm_serial: console setup on port #0 [ 0.968478] Freeing initrd memory: 18300K [ 0.971253] printk: console [ttyMSM0] enabled [ 2.756720] arm-smmu b40000.iommu: probing hardware configuration... [ 2.759925] arm-smmu b40000.iommu: SMMUv2 with: [ 2.766361] arm-smmu b40000.iommu: stage 1 translation [ 2.770568] arm-smmu b40000.iommu: address translation ops [ 2.775767] arm-smmu b40000.iommu: non-coherent table walk [ 2.781323] arm-smmu b40000.iommu: (IDR0.CTTW overridden by FW configuration) [ 2.786881] arm-smmu b40000.iommu: stream matching with 2 register groups [ 2.794206] arm-smmu b40000.iommu: 2 context banks (0 stage-2 only) [ 2.801049] arm-smmu b40000.iommu: Supported page sizes: 0x63315000 [ 2.807538] arm-smmu b40000.iommu: Stage-1: 48-bit VA -> 36-bit IPA [ 2.815777] arm-smmu d00000.iommu: probing hardware configuration... [ 2.820238] arm-smmu d00000.iommu: SMMUv2 with: [ 2.826578] arm-smmu d00000.iommu: stage 1 translation [ 2.830801] arm-smmu d00000.iommu: address translation ops [ 2.836009] arm-smmu d00000.iommu: non-coherent table walk [ 2.841565] arm-smmu d00000.iommu: (IDR0.CTTW overridden by FW configuration) [ 2.847124] arm-smmu d00000.iommu: stream matching with 2 register groups [ 2.854439] arm-smmu d00000.iommu: 2 context banks (0 stage-2 only) [ 2.861290] arm-smmu d00000.iommu: Supported page sizes: 0x63315000 [ 2.867781] arm-smmu d00000.iommu: Stage-1: 32-bit VA -> 36-bit IPA [ 2.875241] arm-smmu d40000.iommu: probing hardware configuration... [ 2.880480] arm-smmu d40000.iommu: SMMUv2 with: [ 2.886837] arm-smmu d40000.iommu: stage 1 translation [ 2.891045] arm-smmu d40000.iommu: address translation ops [ 2.896252] arm-smmu d40000.iommu: non-coherent table walk [ 2.901808] arm-smmu d40000.iommu: (IDR0.CTTW overridden by FW configuration) [ 2.907368] arm-smmu d40000.iommu: stream matching with 42 register groups [ 2.914699] arm-smmu d40000.iommu: 7 context banks (0 stage-2 only) [ 2.921534] arm-smmu d40000.iommu: Supported page sizes: 0x63315000 [ 2.928113] arm-smmu d40000.iommu: Stage-1: 32-bit VA -> 36-bit IPA [ 2.940595] arm-smmu da0000.iommu: probing hardware configuration... [ 2.940774] arm-smmu da0000.iommu: SMMUv2 with: [ 2.947169] arm-smmu da0000.iommu: stage 1 translation [ 2.951374] arm-smmu da0000.iommu: address translation ops [ 2.956582] arm-smmu da0000.iommu: non-coherent table walk [ 2.962137] arm-smmu da0000.iommu: (IDR0.CTTW overridden by FW configuration) [ 2.967701] arm-smmu da0000.iommu: stream matching with 4 register groups [ 2.975011] arm-smmu da0000.iommu: 2 context banks (0 stage-2 only) [ 2.981869] arm-smmu da0000.iommu: Supported page sizes: 0x63315000 [ 2.988354] arm-smmu da0000.iommu: Stage-1: 32-bit VA -> 36-bit IPA [ 2.996091] arm-smmu 1600000.iommu: probing hardware configuration... [ 3.001047] arm-smmu 1600000.iommu: SMMUv2 with: [ 3.007408] arm-smmu 1600000.iommu: stage 1 translation [ 3.012052] arm-smmu 1600000.iommu: address translation ops [ 3.017347] arm-smmu 1600000.iommu: non-coherent table walk [ 3.022988] arm-smmu 1600000.iommu: (IDR0.CTTW overridden by FW configuration) [ 3.028634] arm-smmu 1600000.iommu: stream matching with 15 register groups [ 3.035687] arm-smmu 1600000.iommu: 12 context banks (0 stage-2 only) [ 3.042974] arm-smmu 1600000.iommu: Supported page sizes: 0x63315000 [ 3.049293] arm-smmu 1600000.iommu: Stage-1: 36-bit VA -> 36-bit IPA [ 3.065328] spi_qup 7575000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64 [ 3.070854] dwc3-qcom 76f8800.usb: IRQ hs_phy_irq not found [ 3.071445] dwc3-qcom 76f8800.usb: IRQ dp_hs_phy_irq not found [ 3.076755] dwc3-qcom 76f8800.usb: IRQ dm_hs_phy_irq not found [ 3.082658] dwc3-qcom 76f8800.usb: IRQ ss_phy_irq not found [ 3.093283] phy phy-7412000.phy.6: QUSB2PHY pll lock failed: status reg = 0 [ 3.094633] phy phy-7412000.phy.6: phy init failed --> -16 [ 3.100907] dwc3 7600000.dwc3: error -EBUSY: failed to initialize core [ 3.106461] dwc3: probe of 7600000.dwc3 failed with error -16 [ 3.114382] i2c_qup 7577000.i2c: using default clock-frequency 100000 [ 3.120629] i2c_qup 75b5000.i2c: using default clock-frequency 100000 [ 3.140972] sdhci_msm 74a4900.sdhci: Got CD GPIO [ 3.162114] qcom-pcie 600000.pcie: host bridge /soc/agnoc@0/pcie@600000 ranges: [ 3.162189] qcom-pcie 600000.pcie: IO 0x000c200000..0x000c2fffff -> 0x000c200000 [ 3.168278] qcom-pcie 600000.pcie: MEM 0x000c300000..0x000cffffff -> 0x000c300000 [ 3.175093] genirq: irq_chip msmgpio did not update eff. affinity mask of irq 106 [ 3.184368] mmc0: SDHCI controller on 74a4900.sdhci [74a4900.sdhci] using ADMA 64-bit [ 3.372531] qcom-pcie 600000.pcie: iATU unroll: disabled [ 3.372552] qcom-pcie 600000.pcie: Detected iATU regions: 32 outbound, 8 inbound [ 3.477180] qcom-pcie 600000.pcie: Link up [ 3.477411] qcom-pcie 600000.pcie: PCI host bridge to bus 0000:00 [ 3.480214] pci_bus 0000:00: root bus resource [bus 00-ff] [ 3.486364] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xc200000-0xc2fffff]) [ 3.491747] pci_bus 0000:00: root bus resource [mem 0x0c300000-0x0cffffff] [ 3.501061] pci 0000:00:00.0: [17cb:0104] type 01 class 0x060400 [ 3.507990] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff] [ 3.514219] pci 0000:00:00.0: PME# supported from D0 D3hot [ 3.524683] pci 0000:01:00.0: [168c:003e] type 00 class 0x028000 [ 3.525798] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit] [ 3.532617] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 3.553823] pci 0000:00:00.0: BAR 14: assigned [mem 0x0c400000-0x0c5fffff] [ 3.553851] pci 0000:00:00.0: BAR 0: assigned [mem 0x0c300000-0x0c300fff] [ 3.559617] pci 0000:01:00.0: BAR 0: assigned [mem 0x0c400000-0x0c5fffff 64bit] [ 3.566513] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 3.573572] pci 0000:00:00.0: bridge window [mem 0x0c400000-0x0c5fffff] [ 3.580455] pcieport 0000:00:00.0: PME: Signaling with IRQ 108 [ 3.586811] qcom-pcie 608000.pcie: supply vddpe-3v3 not found, using dummy regulator [ 3.591662] qcom-pcie 608000.pcie: host bridge /soc/agnoc@0/pcie@608000 ranges: [ 3.599377] qcom-pcie 608000.pcie: IO 0x000d200000..0x000d2fffff -> 0x000d200000 [ 3.606403] qcom-pcie 608000.pcie: MEM 0x000d300000..0x000dffffff -> 0x000d300000 [ 3.724531] qcom-pcie 608000.pcie: iATU unroll: disabled [ 3.724552] qcom-pcie 608000.pcie: Detected iATU regions: 32 outbound, 8 inbound [ 4.730603] qcom-pcie 608000.pcie: Phy link never came up [ 4.731108] qcom-pcie 608000.pcie: PCI host bridge to bus 0001:00 [ 4.735066] pci_bus 0001:00: root bus resource [bus 00-ff] [ 4.741136] pci_bus 0001:00: root bus resource [io 0x100000-0x1fffff] (bus address [0xd200000-0xd2fffff]) [ 4.746505] pci_bus 0001:00: root bus resource [mem 0x0d300000-0x0dffffff] [ 4.756202] pci 0001:00:00.0: [17cb:0104] type 01 class 0x060400 [ 4.763024] pci 0001:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff] [ 4.769322] pci 0001:00:00.0: PME# supported from D0 D3hot [ 4.793234] pci 0001:00:00.0: BAR 0: assigned [mem 0x0d300000-0x0d300fff] [ 4.793287] pci 0001:00:00.0: PCI bridge to [bus 01-ff] [ 4.803030] pcieport 0001:00:00.0: PME: Signaling with IRQ 110 [ 4.805795] qcom-pcie 610000.pcie: supply vddpe-3v3 not found, using dummy regulator [ 4.810384] qcom-pcie 610000.pcie: host bridge /soc/agnoc@0/pcie@610000 ranges: [ 4.817960] qcom-pcie 610000.pcie: IO 0x000e200000..0x000e2fffff -> 0x000e200000 [ 4.824999] qcom-pcie 610000.pcie: MEM 0x000e300000..0x000fffffff -> 0x000e300000 [ 4.944407] qcom-pcie 610000.pcie: iATU unroll: disabled [ 4.944434] qcom-pcie 610000.pcie: Detected iATU regions: 32 outbound, 8 inbound [ 5.048965] qcom-pcie 610000.pcie: Link up [ 5.049203] qcom-pcie 610000.pcie: PCI host bridge to bus 0002:00 [ 5.052004] pci_bus 0002:00: root bus resource [bus 00-ff] [ 5.058147] pci_bus 0002:00: root bus resource [io 0x200000-0x2fffff] (bus address [0xe200000-0xe2fffff]) [ 5.063528] pci_bus 0002:00: root bus resource [mem 0x0e300000-0x0fffffff] [ 5.073211] pci 0002:00:00.0: [17cb:0104] type 01 class 0x060400 [ 5.080036] pci 0002:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff] [ 5.086295] pci 0002:00:00.0: PME# supported from D0 D3hot [ 5.099173] pci 0002:01:00.0: [1969:1083] type 00 class 0x020000 [ 5.099357] pci 0002:01:00.0: reg 0x10: [mem 0x00000000-0x0003ffff 64bit] [ 5.104350] pci 0002:01:00.0: reg 0x18: [io 0x0000-0x007f] [ 5.111216] pci 0002:01:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format) [ 5.116715] pci 0002:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 5.142517] pci 0002:00:00.0: BAR 14: assigned [mem 0x0e300000-0x0e3fffff] [ 5.142549] pci 0002:00:00.0: BAR 0: assigned [mem 0x0e400000-0x0e400fff] [ 5.148316] pci 0002:00:00.0: BAR 13: assigned [io 0x200000-0x200fff] [ 5.155162] pci 0002:01:00.0: BAR 0: assigned [mem 0x0e300000-0x0e33ffff 64bit] [ 5.161639] pci 0002:01:00.0: BAR 2: assigned [io 0x200000-0x20007f] [ 5.168798] pci 0002:00:00.0: PCI bridge to [bus 01-ff] [ 5.175378] pci 0002:00:00.0: bridge window [io 0x200000-0x200fff] [ 5.180428] pci 0002:00:00.0: bridge window [mem 0x0e300000-0x0e3fffff] [ 5.188943] pcieport 0002:00:00.0: PME: Signaling with IRQ 112 [ 5.194058] atl1c 0002:01:00.0: enabling device (0000 -> 0002) [ 5.200732] atl1c_setup_mac_funcs 718 SLA4000 doesn't support 1G link. [ 5.266022] adreno b00000.gpu: Adding to iommu group 0 [ 5.268099] msm_mdp 901000.mdp: Adding to iommu group 1 [ 5.273281] msm 900000.mdss: supply vdd not found, using dummy regulator [ 5.275928] msm_mdp 901000.mdp: [drm:mdp5_bind] MDP5 version v1.7 [ 5.282226] msm 900000.mdss: bound 901000.mdp (ops mdp5_ops) [ 5.289697] msm 900000.mdss: bound 9a0000.hdmi-tx (ops msm_hdmi_ops) [ 5.293991] adreno b00000.gpu: Detected speed bin 0 [ 5.301342] adreno b00000.gpu: supply vdd not found, using dummy regulator [ 5.305063] adreno b00000.gpu: supply vddcx not found, using dummy regulator [ 5.311966] adreno b00000.gpu: GPU setting to 624000000 [ 5.319300] adreno b00000.gpu: Setting warming state 0 [ 5.323909] adreno b00000.gpu: Setting warming state 0 [ 5.329160] adreno b00000.gpu: Setting warming state 0 [ 5.337624] msm 900000.mdss: bound b00000.gpu (ops a3xx_ops) [ 5.493812] [drm] Initialized msm 1.8.0 20130625 for 900000.mdss on minor 0 [ 5.494503] msm 900000.mdss: [drm:adreno_request_fw] loaded qcom/a530_pm4.fw from new location [ 5.499768] msm 900000.mdss: [drm:adreno_request_fw] loaded qcom/a530_pfp.fw from new location [ 5.508416] msm 900000.mdss: [drm:adreno_request_fw] loaded qcom/a530v3_gpmu.fw2 from new location [ 5.518243] msm 900000.mdss: [drm:adreno_request_fw] loaded qcom/a530_zap.mdt from new location [ 5.536629] msm 900000.mdss: [drm] Cannot find any crtc or sizes [ 5.539233] ufshcd-qcom 624000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled [ 5.543135] ufshcd-qcom 624000.ufshc: Failed to get reset control -2 [ 5.555586] scsi host0: ufshcd [ 5.559022] ufshcd-qcom 624000.ufshc: ufs_qcom_host_reset: reset control not set [ 5.569206] dwc3-qcom 6af8800.usb: IRQ dp_hs_phy_irq not found [ 5.569243] dwc3-qcom 6af8800.usb: IRQ dm_hs_phy_irq not found [ 5.585182] input: gpio_keys as /devices/platform/gpio_keys/input/input2 [ 5.585967] of_cfs_in��[ 5.631753] scsi 0:0:0:49488: Well-known LUN TOSHIBA THGAF8G9T43BAIRB 0300 PQ: 0 ANSI: 6 [ 5.633889] scsi 0:0:0:49476: Well-known LUN TOSHIBA THGAF8G9T43BAIRB 0300 PQ: 0 ANSI: 6 [ 5.641540] scsi 0:0:0:49456: Well-known LUN TOSHIBA THGAF8G9T43BAIRB 0300 PQ: 0 ANSI: 6 [ 5.651042] scsi 0:0:0:0: Direct-Access TOSHIBA THGAF8G9T43BAIRB 0300 PQ: 0 ANSI: 6 [ 5.658789] scsi 0:0:0:1: Direct-Access TOSHIBA THGAF8G9T43BAIRB 0300 PQ: 0 ANSI: 6 [ 5.658912] sd 0:0:0:0: [sda] 14530560 4096-byte logical blocks: (59.5 GB/55.4 GiB) [ 5.672562] sd 0:0:0:0: [sda] Write Protect is off [ 5.680076] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 5.684880] sd 0:0:0:0: [sda] Optimal transfer size 65536 bytes [ 5.684911] scsi 0:0:0:2: Direct-Access TOSHIBA THGAF8G9T43BAIRB 0300 PQ: 0 ANSI: 6 [ 5.694252] sd 0:0:0:1: [sdb] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB) [ 5.698527] sda: sda1 [ 5.700607] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.701019] scsi 0:0:0:3: Direct-Access TOSHIBA THGAF8G9T43BAIRB 0300 PQ: 0 ANSI: 6 [ 5.701185] sd 0:0:0:2: [sdc] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB) [ 5.701300] sd 0:0:0:2: [sdc] Write Protect is off [ 5.701524] sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 5.701614] sd 0:0:0:2: [sdc] Optimal transfer size 65536 bytes [ 5.703362] scsi 0:0:0:4: Direct-Access TOSHIBA THGAF8G9T43BAIRB 0300 PQ: 0 ANSI: 6 [ 5.704111] sd 0:0:0:3: [sdd] 32768 4096-byte logical blocks: (134 MB/128 MiB) [ 5.704147] scsi 0:0:0:5: Direct-Access TOSHIBA THGAF8G9T43BAIRB 0300 PQ: 0 ANSI: 6 [ 5.704172] sd 0:0:0:3: [sdd] Write Protect is off [ 5.704270] sd 0:0:0:3: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 5.704326] sd 0:0:0:3: [sdd] Optimal transfer size 65536 bytes [ 5.705542] sdc: sdc1 [ 5.706033] sd 0:0:0:4: [sde] 1048576 4096-byte logical blocks: (4.29 GB/4.00 GiB) [ 5.706082] sd 0:0:0:4: [sde] Write Protect is off [ 5.706394] sd 0:0:0:4: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 5.706468] sd 0:0:0:4: [sde] Optimal transfer size 65536 bytes [ 5.707149] sd 0:0:0:2: [sdc] Attached SCSI disk [ 5.707401] sdd: sdd1 sdd2 sdd3 [ 5.708021] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 5.708062] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 1 [ 5.708296] xhci-hcd xhci-hcd.2.auto: hcc params 0x0228f665 hci version 0x100 quirks 0x0000000002010010 [ 5.708388] xhci-hcd xhci-hcd.2.auto: irq 115, io mem 0x06a00000 [ 5.708931] sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27 sde28 sde29 sde30 [ 5.709552] sd 0:0:0:1: [sdb] Write Protect is off [ 5.709924] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 5.710067] sd 0:0:0:1: [sdb] Optimal transfer size 65536 bytes [ 5.715520] sd 0:0:0:5: [sdf] 8192 4096-byte logical blocks: (33.6 MB/32.0 MiB) [ 5.715953] hub 1-0:1.0: USB hub found [ 5.716006] hub 1-0:1.0: 1 port detected [ 5.716441] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 5.716461] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 2 [ 5.716478] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed [ 5.716594] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 5.717432] hub 2-0:1.0: USB hub found [ 5.717766] sd 0:0:0:3: [sdd] Attached SCSI disk [ 5.721570] sd 0:0:0:5: [sdf] Write Protect is off [ 5.724313] sd 0:0:0:4: [sde] Attached SCSI disk [ 5.729521] hub 2-0:1.0: 1 port detected [ 5.731071] sdb: sdb1 [ 5.732325] sd 0:0:0:1: [sdb] Attached SCSI disk [ 5.966908] sd 0:0:0:5: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 5.971203] sd 0:0:0:5: [sdf] Optimal transfer size 65536 bytes [ 5.982744] sdf: sdf1 sdf2 sdf3 sdf4 sdf5 sdf6 sdf7 sdf8 sdf9 [ 5.988141] sd 0:0:0:5: [sdf] Attached SCSI disk [ 5.993857] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 5.995796] EXT4-fs (sda1): write access will be enabled during recovery [ 6.017317] EXT4-fs (sda1): recovery complete [ 6.018226] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 6.020720] VFS: Mounted root (ext4 filesystem) readonly on device 8:1. [ 6.030365] devtmpfs: mounted [ 6.036883] Freeing unused kernel memory: 3200K [ 6.039625] Run /sbin/init as init process [ 6.203457] systemd[1]: System time before build time, advancing clock. [ 6.269927] NET: Registered PF_INET6 protocol family [ 6.271901] Segment Routing with IPv6 [ 6.273988] In-situ OAM (IOAM) with IPv6 [ 6.296097] systemd[1]: Configuration file /etc/systemd/system.conf is marked executable. Please remove executable permission bits. Proceeding anyway. [ 6.296147] systemd[1]: Configuration file /etc/systemd/system.conf is marked world-writable. Please remove world writability permission bits. Proceeding anyway. Welcome to Debian GNU/Linux 10 (buster)! Failed to bump fs.file-max, ignoring: Invalid argument File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loa[ 6.558920] msm 900000.mdss: [drm] Cannot find any crtc or sizes ded unit using IP firewalling.) Configuration file /etc/systemd/system/systemd-udevd.service is marked executable. Please remove executable permission bits. Proceeding anyway. Configuration file /etc/systemd/system/systemd-udevd.service is marked world-writable. Please remove world writability permission bits. Proceeding anyway. Configuration file /etc/systemd/system/sla_vtstart.service is marked executable. Please remove executable permission bits. Proceeding anyway. Configuration file /etc/systemd/system/sla_vtstart.service is marked world-writable. Please remove world writability permission bits. Proceeding anyway. Configuration file /etc/systemd/system/sla_rtsp.service is marked executable. Please remove executable permission bits. Proceeding anyway. Configuration file /etc/systemd/system/sla_rtsp.service is marked world-writable. Please remove world writability permission bits. Proceeding anyway. Configuration file /etc/systemd/system/sla_init.service is marked executable. Please remove executable permission bits. Proceeding anyway. Configuration file /etc/systemd/system/sla_Discover.service is marked executable. Please remove executab[ 6.816996] random: systemd: uninitialized urandom read (16 bytes read) le permission bits. Proceeding anyway. [ 6.830465] random: systemd: uninitialized urandom read (16 bytes read) [ 6.833290] random: systemd: uninitialized urandom read (16 bytes read) [ OK ] Listening on Syslog Socket. [ OK ] Reached target Remote File Systems. [ OK ] Reached target Swap. [ OK ] Listening on Journal Socket. Starting nftables... Mounting POSIX Message Queue File System... Mounting Kernel Debug File System... [ OK ] Listening on udev Kernel Socket. [ OK ] Created slice User and Session Slice. [ OK ] Listening on Journal Audit Socket. Starting Set the console keyboard layout... Starting Wait Until Kernel Time Synchronized... [ OK ] Listening on udev Control Socket. Starting udev Coldplug all Devices... [ OK ] Created slice system-serial\x2dgetty.slice. [ OK ] Listening on Network Service Netlink Socket. [ OK ] Reached target Slices. Starting Load Kernel Modules... Mounting Huge Pages File System... [ OK ] Listening on Journal Socket (/dev/log). Starting Nameserver information manager... [ OK ] Reached target Remote Encrypted Volumes. Starting Create list of re���odes for the current kernel... [ OK ] Started Forward Password R���uests to Wall Directory Watch. [ OK ] Listening on initctl Compatibility Named Pipe. Starting Journal Service... Starting Wait for network to be configured by ifupdown... [ OK ] Listening on fsck to fsckd communication Socket. Starting File System Check on Root Device... [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Kernel Debug File System. [ OK ] Started Load Kernel Modules. nftables.service: Failed with result 'exit-code'. [FAILED] Failed to start nftables. See 'systemctl status nftables.service' for details. [ OK ] Mounted Huge Pages File System. [ OK ] Started Create list of req��� nodes for the current kernel. [ OK ] Started Nameserver information manager. [ OK ] Started File System Check Daemon to report status. [ OK ] Reached target Network (Pre). Mounting Kernel Configuration File System... Starting Apply Kernel Variables... [ OK ] Mounted Kernel Configuration File System. [ OK ] Started Apply Kernel Variables. [ OK ] Started File System Check on Root Device. Starting Remount Root and Kernel File Systems... [ 7.233749] EXT4-fs (sda1): re-mounted. Opts: data=ordered. Quota mode: none. [ OK ] Started Remount Root and Kernel File Systems. Starting Load/Save Random Seed... Starting Create System Users... [ OK ] Started Load/Save Random Seed. [ OK ] Started Create System Users. Starting Create Static Device Nodes in /dev... [ OK ] Started Set the console keyboard layout. [ OK ] Started Journal Service. [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). [ OK ] Reached target Local File Systems. Starting Set console font and keymap... Starting Enable support fo���l executable binary formats... Starting Tell Plymouth To Write Out Runtime Data... Starting udev Kernel Device Manager... Starting Flush Journal to Persistent Storage... [ OK ] Started Set console font and keymap. [ OK ] Started Enable support for���nal executable binary formats. [ OK ] Started Tell Plymouth To Write Out Runtime Data. [ OK ] Started udev Kernel Device Manager. Starting Network Service... [ 7.667838] systemd-journald[207]: Received request to flush runtime journal from PID 1 [ OK ] Started Flush Journal to Persistent Storage. Starting Create Volatile Files and Directories... [ OK ] Started Network Service. [ OK ] Started Create Volatile Files and Directories. [ 7.891514] random: systemd: uninitialized urandom read (16 bytes read) [ OK ] Started Entropy daemon using the HAVEGE algorithm. [ 7.922249] random: systemd-journal: uninitialized urandom read (16 bytes read) [ 7.939290] random: systemd: uninitialized urandom read (16 bytes read) Starting Network Name Resolution... Starting Update UTMP about System Boot/Shutdown... Starting Network Time Synchronization... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started Network Time Synchronization. [ OK ] Started udev Coldplug all Devices. [ OK ] Started Network Name Resolution. [ OK ] Reached target Host and Network Name Lookups. Starting Helper to synchronize boot up for ifupdown... Starting Show Plymouth Boot Screen... [ OK ] Started Helper to synchronize boot up for ifupdown. [ OK ] Started Show Plymouth Boot Screen. [ 8.899319] random: systemd: uninitialized urandom read (16 bytes read) [ 8.899425] random: systemd: uninitialized urandom read (16 bytes read) [ 8.905113] random: systemd: uninitialized urandom read (16 bytes read) [ OK ] Started Forward Password R���s to Plymouth Directory Watch. [ OK ] Reached target Local Encrypted Volumes. [ OK ] Reached target System Initialization. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on OpenBSD Secure Shell server socket. [ OK ] Reached target Sockets. [ OK ] Reached target Paths. [ OK ] Reached target Basic System. Starting LSB: Load kernel ���d to enable cpufreq scaling... Starting QRTR service... Starting System Logging Service... [ OK ] Started Regular background program processing daemon. [ OK ] Started D-Bus System Message Bus. Starting Network Manager... [ 9.317692] rtc-pm8xxx 400f000.qcom,spmi:pmic@0:rtc@6000: registered as rtc0 [ 9.317885] rtc-pm8xxx 400f000.qcom,spmi:pmic@0:rtc@6000: setting system clock to 1970-01-01T00:00:11 UTC (11) Starting Modem Manager... Starting Initialize hardware monitoring sensors... Starting Login Service... Starting Restore /etc/reso��� the ppp link was shut down... Starting Raise network interfaces... [ OK ] Started System Logging Service. [ OK ] Started QRTR service. [ OK ] Started Restore /etc/resol���re the ppp link was shut down. [ OK ] Started Initialize hardware monitoring sensors. [ 10.052171] random: systemd: uninitialized urandom read (16 bytes read) [ 10.291563] mc: Linux media interface: v0.10 [ 10.333956] qcom_q6v5_pas 9300000.remoteproc: supply cx not found, using dummy regulator [ 10.338372] videodev: Linux video capture interface: v2.00 [ 10.371988] max310x 1-006c: uart info major=204, minor = 209, nr=4 name=ttyMAX0 [ 10.377075] max310x 1-006c: LINE=1715 [ 10.378933] 1-006c: ttyMAX00 at I/O 0x6c (irq = 117, base_baud = 2764800) is a MAX14830 [ 10.385156] qcom_q6v5_pas 9300000.remoteproc: supply px not found, using dummy regulator [ 10.406356] 1-006c: ttyMAX01 at I/O 0x5c (irq = 117, base_baud = 2764800) is a MAX14830 [ 10.419773] remoteproc remoteproc0: 9300000.remoteproc is available [ 10.420584] remoteproc remoteproc0: Direct firmware load for qcom/apq8096/adsp.mbn failed with error -2 [ 10.425106] remoteproc remoteproc0: powering up 9300000.remoteproc [ 10.434449] remoteproc remoteproc0: Direct firmware load for qcom/apq8096/adsp.mbn failed with error -2 [ 10.440516] remoteproc remoteproc0: request_firmware failed: -2 [ 10.494409] 1-006c: ttyMAX02 at I/O 0x2c (irq = 117, base_baud = 2764800) is a MAX14830 [ 10.521257] 1-006c: ttyMAX03 at I/O 0x1c (irq = 117, base_baud = 2764800) is a MAX14830 [ 10.555323] qcom-camss a34000.camss: Adding to iommu group 2 [ 10.579803] max310x 3-0061: MAX14830 ID 0x00 does not match [ 10.667930] qcom-venus c00000.video-codec: Adding to iommu group 3 [ 10.687159] atl1c 0002:01:00.0 enP2p1s0: renamed from eth0 [ OK ] Started LSB: Load kernel m���ded to enable cpufreq scaling. [ 11.003286] qcom-camss a34000.camss: VFE HW Version = 0x70020000 [ 11.015786] qcom-camss a34000.camss: VFE HW Version = 0x70020000 [ 11.031805] qcom-camss a34000.camss: VFE HW Version = 0x70020000 [ 11.047083] qcom-camss a34000.camss: VFE HW Version = 0x70020000 [ 11.049049] qcom-camss a34000.camss: VFE HW Version = 0x70020000 [ 11.052636] qcom-camss a34000.camss: VFE HW Version = 0x70020000 [ 11.059058] qcom-camss a34000.camss: VFE HW Version = 0x70020000 [ 11.064891] qcom-camss a34000.camss: VFE HW Version = 0x70020000 [ OK ] Started Raise network interfaces. [ 11.106583] MT9034 at address 0x3b [ 11.106669] mt9034 5-003b: MT9034 detected at address 0x3b [ 11.111826] mt9034 5-003b: mt9034_set_format: Enter [ 11.114469] mt9034 5-003b: mt9034_set_format: width=640 height=720 type=1 [ 11.120411] MT9034 at address 0x3a [ 11.127961] mt9034 5-003a: MT9034 detected at address 0x3a [ 11.153637] mt9034 5-003a: mt9034_set_format: Enter [ 11.153710] mt9034 5-003a: mt9034_set_format: width=640 height=720 type=1 [ OK ] Found device /dev/ttyMSM0. [ OK ] Listening on Load/Save RF ���itch Status /dev/rfkill Watch. [ OK ] Started ifup for enP2p1s0. Starting Hostname Service... Starting Authorization Manager... Starting LSB: set CPUFreq kernel parameters... [ OK ] Started Network Manager. [ OK ] Started Login Service. [ OK ] Reached target Network. Starting vsftpd FTP server... Starting Permit User Sessions... [ OK ] Started vsftpd FTP server. [ OK ] Started Permit User Sessions. [ OK ] Started Authorization Manager. [ OK ] Started Hostname Service. Starting Network Manager Script Dispatcher Service... [ 14.455515] atl1c 0002:01:00.0: atl1c: enP2p1s0 NIC Link is Up<100 Mbps Full Duplex> [ OK ] Started LSB: set CPUFreq kernel parameters. [ OK ] Started Modem Manager. [ OK ] Started Network Manager Script Dispatcher Service. [ OK ] Started Wait for network to be configured by ifupdown. [ OK ] Reached target Network is Online. [ OK ] Started SLA RTSP Service. [ OK ] Started SLA Discover Service. Starting SLA specific startup script... Starting /etc/rc.local Compatibility... [ OK ] Started /etc/rc.local Compatibility. Starting Hold until boot process finishes up... Starting Terminate Plymouth Boot Screen... [ 18.450531] export_store: invalid GPIO 448 Debian GNU/Linux 10 sla-alip ttyMSM0 sla-alip login: root (automatic login) Last login: Wed Dec 31 16:00:26 PST 1969 on ttyMSM0 Linux sla-alip 5.15.0-ifc6601-arm64 #6 SMP PREEMPT Wed Apr 5 12:51:30 PDT 2023 aarch64 The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. root@sla-alip:~# [ 21.048673] qcom-camss a34000.camss: Failed to add VFE#0 to power domain [ 21.048753] qcom-camss a34000.camss: Failed to power up pipeline: -22 [ 21.049090] qcom-camss a34000.camss: Failed to add VFE#0 to power domain [ 21.062497] qcom-camss a34000.camss: Failed to add VFE#1 to power domain [ 21.063237] qcom-camss a34000.camss: Failed to power up pipeline: -22 [ 21.067741] qcom-camss a34000.camss: Failed to power up pipeline: -22 [ 21.069276] qcom-camss a34000.camss: Failed to add VFE#1 to power domain [ 21.069294] qcom-camss a34000.camss: Failed to power up pipeline: -22 [ 21.074356] qcom-camss a34000.camss: Failed to add VFE#0 to power domain [ 21.100181] qcom-camss a34000.camss: Failed to power up pipeline: -22 [ 21.100264] qcom-camss a34000.camss: Failed to add VFE#0 to power domain [ 21.113469] qcom-camss a34000.camss: Failed to power up pipeline: -22 [ 21.219160] qcom-camss a34000.camss: VFE HW Version = 0x70020000 [ 21.760870] ***Cam:0 No Adapter board found [ 21.760870] [ 21.957230] qcom-camss a34000.camss: VFE HW Version = 0x70020000 [ 21.957827] qcom-camss a34000.camss: VFE HW Version = 0x70020000 [ 21.962970] qcom-camss a34000.camss: VFE HW Version = 0x70020000 [ 21.968930] qcom-camss a34000.camss: VFE HW Version = 0x70020000 [ 21.974884] qcom-camss a34000.camss: VFE HW Version = 0x70020000 [ 21.982331] qcom-camss a34000.camss: VFE HW Version = 0x70020000 [ 21.986845] qcom-camss a34000.camss: VFE HW Version = 0x70020000 [ 21.992811] qcom-camss a34000.camss: VFE HW Version = 0x70020000 [ 22.496227] VTNext pid=792 [ 23.119679] qcom-camss a34000.camss: VFE HW Version = 0x70020000 [ 23.228076] qcom-camss a34000.camss: VFE HW Version = 0x70020000 [ 23.254283] qcom-camss a34000.camss: VFE HW Version = 0x70020000 [ 23.280498] qcom-camss a34000.camss: VFE HW Version = 0x70020000 [ 23.307420] qcom-camss a34000.camss: VFE HW Version = 0x70020000 [ 23.337392] qcom-camss a34000.camss: VFE HW Version = 0x70020000 Format: Log Type - Time(microsec) - Message - Optional Info Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic S - QC_IMAGE_VERSION_STRING=BOOT.XF.1.0-00301 S - IMAGE_VARIANT_STRING=M8996LAB S - OEM_IMAGE_VERSION_STRING=crm-ubuntu68 S - Boot Interface: UFS S - Secure Boot: Off S - Boot Config @ 0x00076044 = 0x000001c9 S - JTAG ID @ 0x000760f4 = 0x4003e0e1 S - OEM ID @ 0x000760f8 = 0x00000000 S - Serial Number @ 0x00074138 = 0x50c01f00 S - OEM Config Row 0 @ 0x00074188 = 0x0000000000000000 S - OEM Config Row 1 @ 0x00074190 = 0x0000000000000000 S - Feature Config Row 0 @ 0x000741a0 = 0x0050000010000100 S - Feature Config Row 1 @ 0x000741a8 = 0x00fff00001ffffff S - Core 0 Frequency, 1228 MHz B - 0 - PBL, Start B - 10413 - bootable_media_detect_entry, Start B - 47050 - bootable_media_detect_success, Start B - 47054 - elf_loader_entry, Start B - 48082 - auth_hash_seg_entry, Start B - 48183 - auth_hash_seg_exit, Start B - 79955 - elf_segs_hash_verify_entry, Start B - 82454 - PBL, End B - 84454 - SBL1, Start B - 180407 - usb: hs_phy_nondrive_start B - 180743 - usb: PLL lock success - 0x3 B - 183732 - usb: hs_phy_nondrive_finish B - 187880 - boot_flash_init, Start D - 30 - boot_flash_init, Delta B - 194956 - sbl1_ddr_set_default_params, Start D - 0 - sbl1_ddr_set_default_params, Delta B - 202947 - boot_config_data_table_init, Start D - 102114 - boot_config_data_table_init, Delta - (60 Bytes) B - 309575 - CDT Version:3,Platform ID:24,Major ID:1,Minor ID:0,Subtype:0 B - 314272 - Image Load, Start D - 22173 - PMIC Image Loaded, Delta - (37272 Bytes) B - 336476 - pm_device_init, Start B - 342240 - PON REASON:PM0:0x20020 PM1:0x200a0 B - 378627 - PM_SET_VAL:Skip D - 39985 - pm_device_init, Delta B - 380548 - pm_driver_init, Start D - 2928 - pm_driver_init, Delta B - 387136 - pm_sbl_chg_init, Start D - 91 - pm_sbl_chg_init, Delta B - 393907 - vsense_init, Start D - 0 - vsense_init, Delta B - 401837 - Pre_DDR_clock_init, Start D - 396 - Pre_DDR_clock_init, Delta B - 407510 - ddr_initialize_device, Start B - 411201 - 8996 v3.x detected, Max frequency = 1.8 GHz B - 417636 - ddr_initialize_device, Delta B - 420808 - Basic DDR tests done B - 2001593 - clock_init, Start D - 274 - clock_init, Delta B - 2003606 - Image Load, Start D - 6222 - QSEE Dev Config Image Loaded, Delta - (46008 Bytes) B - 2010102 - Image Load, Start D - 5643 - APDP Image Loaded, Delta - (0 Bytes) B - 2040175 - usb: fedl, vbus_low B - 2040236 - Image Load, Start D - 10706 - XBLRamDump Image Loaded, Delta - (342782 Bytes) B - 2105537 - usb: init start B - 2107367 - usb: PLL lock success , 0x2