[0] BUILD_VERSION= [0] BUILD_DATE=15:40:46 - Jul 5 2021 [0] welcome to lk [10] platform_init() [10] target_init() [10] RPM GLink Init [10] Opening RPM Glink Port success [10] Opening SSR Glink Port success [20] Glink Connection between APPS and RPM established [20] Glink Connection between APPS and RPM established [40] UFS init success [40] Qseecom Init Done in Appsbl [40] secure app region addr=0x86600000 size=0x2200000[50] TZ App region notif returned with status:0 addr:86600000 size:35651584 [60] TZ App log region register returned with status:0 addr:916d4000 size:4096 [60] Qseecom TZ Init Done in Appsbl [80] Loading cmnlib done [80] qseecom_start_app: Loading app keymaster for the first time' [110] <8>keymaster: "\"KEYMASTER Init \"" [110] Setting display_panel to none [110] Selected panel: none Skip panel configuration [120] pm8x41_get_is_cold_boot: cold boot [120] Unable to locate /bootselect partition [130] boot_verifier: Device is in ORANGE boot state. [130] Device is unlocked! Skipping verification... [140] Loading (boot) image (27734016): start [240] Loading (boot) image (27734016): done [240] use_signed_kernel=1, is_unlocked=1, is_tampered=0. [250] Your device has been unlocked and can't be trusted. [250] mdtp: mdtp_img loaded [260] mdtp: is_test_mode: test mode is set to 1 [260] mdtp: read_metadata: SUCCESS [280] LK SEC APP Handle: 0x1 [280] Return value from recv_data: 14 [290] Return value from recv_data: 14 [300] Return value from recv_data: 14 [310] decompressing kernel image: start [580] decompressing kernel image: done [590] qcom,msm-id entry not found [590] Only one appended non-skales DTB, select it. [600] cmdline: root=/dev/sda1 rootwait console=ttyMSM0,115200n8 androidboot.bootdevice=624000.ufshc androidboot.verifiedbootstate=orange androidboot.veritymode=enforcing androidboot.serialno=2604fd8c androidboot.baseband=apq mdss_mdp.panel=0 [620] Updating device tree: start [620] Updating device tree: done [620] Return value from recv_data: 14 [630] RPM GLINK UnInit [630] Qseecom De-Init Done in Appsbl [630] booting linux @ 0x80080000, ramdisk @ 0x92493000 (18740546), tags/device tree @ 0x85600000 [640] Jumping to kernel via monitor [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x511f2112] [ 0.000000] Linux version 5.15.0-ifc6601-arm64 (slroot@PDXKSTEINER) ((gcc version 11.2-2022.02 (arm-11.14))) #6 SMP PREEMPT Wed Apr 5 12:51:30 PDT 2023 [ 0.000000] Machine model: Qualcomm Technologies, Inc. DB820c [ 0.000000] efi: UEFI not found. [ 0.000000] [Firmware Bug]: Kernel image misaligned at boot, please fix your bootloader! [ 0.000000] OF: reserved mem: OVERLAP DETECTED! [ 0.000000] gpu@8f200000 (0x0000000090b00000--0x0000000091500000) overlaps with slpi@90b00000 (0x0000000090b00000--0x0000000091500000) [ 0.000000] Reserved memory: created DMA memory pool at 0x0000000090b00000, size 10 MiB [ 0.000000] OF: reserved mem: initialized node gpu@8f200000, compatible id shared-dma-pool [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x000000017e44ffff] [ 0.000000] NUMA: NODE_DATA [mem 0x17dc36c00-0x17dc38fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000017e44ffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000857fffff] [ 0.000000] node 0: [mem 0x0000000085800000-0x00000000916fffff] [ 0.000000] node 0: [mem 0x0000000091700000-0x00000000a1dfffff] [ 0.000000] node 0: [mem 0x00000000a1e00000-0x00000000a1ffffff] [ 0.000000] node 0: [mem 0x00000000a2000000-0x000000017e44ffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000017e44ffff] [ 0.000000] On node 0, zone Normal: 7088 pages in unavailable ranges [ 0.000000] cma: Reserved 32 MiB at 0x00000000fe000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] psci: OSI mode supported. [ 0.000000] psci: failed to set PC mode: -1 [ 0.000000] percpu: Embedded 19 pages/cpu s40664 r8192 d28968 u77824 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Qualcomm Technologies Falkor/Kryo erratum 1003 [ 0.000000] CPU features: detected: Qualcomm erratum 1009, or ARM erratum 1286807 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1025214 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/sda1 rootwait console=ttyMSM0,115200n8 androidboot.bootdevice=624000.ufshc androidboot.verifiedbootstate=orange androidboot.veritymode=enforcing androidboot.serialno=2604fd8c androidboot.baseband=apq mdss_mdp.panel=0 [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000fa000000-0x00000000fe000000] (64MB) [ 0.000000] Memory: 3746980K/4165952K available (12416K kernel code, 1956K rwdata, 5456K rodata, 3200K init, 410K bss, 386204K reserved, 32768K cma-reserved) [ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: enabling workaround for GICv3: Qualcomm MSM8996 broken firmware [ 0.000000] GICv3: 608 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: GICv4 features: d 0 pages0000] GICv3: CPU0: found redistributor 0 region 0:0x0000000009c00000 [ 0.207454] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.207460] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages/virt). [ 0.211098] cryptd: max_cpu_qlen set to 1000ask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.218474] iommu: Default domain type: Translated on 52ns, wraps every 4398046511078ns [ 0.218493] iommu: DMA domain TLB invalidation policy: strict mode [ 0.220509] vgaarb: loadedlay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [ 0.220767] SCSI subsystem initializednimum: 301 [ 0.221733] usbcore: registered new interface driver usbfs [ 0.221765] usbcore: registered new interface driver hub 4, 65536 bytes, linear) [ 0.221799] usbcore: registered new device driver usb (order: 4, 65536 bytes, linear) [ 0.222165] pps_core: LinuxPPS API ver. 1 registered [ 0.222173] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.222186] PTP clock support registeredPUs ... [ 0.222325] EDAC MC: Ver: 3.0.0he on CPU1 [ 0.223330] psci: failed to set OSI mode: -1 1 region 0:0x0000000009c40000 [ 0.223784] qcom_scm: convention: smc arm 64 0x0000000001 [0x511f2112] [ 0.226093] FPGA manager frameworkon CPU2 [ 0.229262] clocksource: Switched to clocksource arch_sys_counter00009c80000 [ 0.229572] VFS: Disk quotas dquot_6.6.0ssor 0x0000000100 [0x511f2052] [ 0.229682] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.240142] vreg_s3a_1p3: Bringing 0uV into 1300000-1300000uV000000009cc0000 [ 0.240295] vreg_s3a_1p3: supplied by vph_pwr0x0000000101 [0x511f2052] [ 0.240363] vreg_s4a_1p8: Bringing 0uV into 1800000-1800000uV [ 0.240385] vreg_s4a_1p8: supplied by vph_pwrted. [ 0.240634] vreg_s5a_2p15: Bringing 0uV into 2150000-2150000uV [ 0.240743] vreg_s5a_2p15: supplied by vph_pwr Support [ 0.240817] vreg_s7a_1p0: Bringing 0uV into 800000-800000uV [ 0.240921] vreg_s7a_1p0: supplied by vph_pwr [ 0.240987] vreg_l1a_1p0: Bringing 0uV into 1000000-1000000uV [ 0.241167] vreg_l2a_1p25: Bringing 0uV into 1250000-1250000uV [ 0.241295] vreg_l2a_1p25: supplied by vreg_s3a_1p3 [ 0.241365] vreg_l3a_0p875: Bringing 0uV into 850000-850000uV: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.241475] vreg_l3a_0p875: supplied by vreg_s3a_1p3, 65536 bytes, linear) [ 0.241546] vreg_l4a_1p225: Bringing 0uV into 1225000-1225000uV [ 0.241650] vreg_l4a_1p225: supplied by vreg_s3a_1p3 [ 0.241726] vreg_l6a_1p2: Bringing 0uV into 1200000-1200000uVly [ 0.241850] vreg_l6a_1p2: supplied by vreg_s5a_2p15ol for atomic allocations [ 0.241922] vreg_l8a_1p8: Bringing 0uV into 1800000-1800000uV for atomic allocations [ 0.242038] vreg_l8a_1p8: supplied by vph_pwrNEL|GFP_DMA32 pool for atomic allocations [ 0.242107] vreg_l9a_1p8: Bringing 0uV into 1800000-1800000uV [ 0.242262] vreg_l10a_1p8: Bringing 0uV into 1800000-1800000uV audit_enabled=0 res=1 [ 0.242440] vreg_l11a_1p15: Bringing 0uV into 1150000-1150000uV' [ 0.242570] vreg_l11a_1p15: supplied by vreg_s3a_1p3 'power_allocator' [ 0.242644] vreg_l12a_1p8: Bringing 0uV into 1800000-1800000uV [ 0.242782] vreg_l12a_1p8: supplied by vreg_s5a_2p15ly [ 0.242856] vreg_l13a_2p95: Bringing 0uV into 1800000-1800000uVregisters. [ 0.243046] vreg_l14a_1p8: Bringing 0uV into 1800000-1800000uV [ 0.243200] vreg_l14a_1p8: supplied by vreg_s5a_2p15 [ 0.243274] vreg_l15a_1p8: Bringing 0uV into 1800000-1800000uVith 624000.ufshc [ 0.243428] vreg_l15a_1p8: supplied by vreg_s5a_2p15re-allocated 0 pages [ 0.243500] vreg_l16a_2p7: Bringing 0uV into 2700000-2700000uVe [ 0.243656] vreg_l16a_2p7: supplied by vph_pwr [ 0.243736] vreg_l17a_2p8: Bringing 0uV into 2500000-2500000uV [ 0.243944] vreg_l18a_2p85: Bringing 0uV into 2700000-2700000uV [ 0.244157] vreg_l19a_2p8: Bringing 0uV into 3000000-3000000uV [ 0.244386] vreg_l20a_2p95: Bringing 0uV into 2950000-2950000uV [ 0.244633] vreg_l21a_2p95: Bringing 0uV into 2950000-2950000uV [ 0.244899] vreg_l22a_3p0: Bringing 0uV into 3300000-3300000uV [ 0.245207] vreg_l23a_2p8: Bringing 0uV into 2800000-2800000uV [ 0.245512] vreg_l24a_3p075: Bringing 0uV into 3075000-3075000uV [ 0.245823] vreg_l25a_1p2: Bringing 0uV into 1200000-1200000uV [ 0.246093] vreg_l25a_1p2: supplied by vreg_s3a_1p3 [ 0.246176] vreg_l26a_0p8: Bringing 0uV into 1000000-1000000uV [ 0.246447] vreg_l26a_0p8: supplied by vreg_s3a_1p3 [ 0.246532] vreg_l28a_0p925: Bringing 0uV into 925000-925000uV [ 0.246826] vreg_l28a_0p925: supplied by vreg_s3a_1p3 [ 0.246917] vreg_l29a_2p8: Bringing 0uV into 2800000-2800000uV [ 0.247261] vreg_l30a_1p8: Bringing 0uV into 1800000-1800000uV [ 0.247563] vreg_l30a_1p8: supplied by vph_pwr [ 0.247656] vreg_l32a_1p8: Bringing 0uV into 1800000-1800000uV [ 0.247966] vreg_l32a_1p8: supplied by vreg_s5a_2p15 [ 0.248366] vreg_lvs1a_1p8: supplied by vreg_s4a_1p8 [ 0.248749] vreg_lvs2a_1p8: supplied by vreg_s4a_1p8 [ 0.249191] vph_pwr_bbyp: Bringing 0uV into 3300000-3300000uV [ 0.249556] vph_pwr_bbyp: supplied by vph_pwr [ 0.249634] vreg_s1b_1p025: Bringing 0uV into 1025000-1025000uV [ 0.249975] vreg_s1b_1p025: supplied by vph_pwr [ 0.354561] NET: Registered PF_INET protocol family [ 0.354690] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.356855] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.356887] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.356900] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.356971] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.357144] TCP: Hash tables configured (established 32768 bind 32768) [ 0.357265] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.357296] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.357423] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.359206] RPC: Registered named UNIX socket transport module. [ 0.359222] RPC: Registered udp transport module. [ 0.359228] RPC: Registered tcp transport module. [ 0.359233] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.359245] PCI: CLS 0 bytes, default 64 [ 0.364870] kvm [1]: HYP mode not available [ 0.371672] workingset: timestamp_bits=42 max_order=20 bucket_order=0 [ 0.372357] Unpacking initramfs... [ 0.377377] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.378009] NFS: Registering the id_resolver key type [ 0.378048] Key type id_resolver registered [ 0.378055] Key type id_legacy registered [ 0.378132] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.378140] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.379597] 9p: Installing v9fs 9p2000 file system support [ 0.437069] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.437085] io scheduler mq-deadline registered [ 0.437092] io scheduler kyber registered [ 0.459798] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.461825] msm_serial: driver initialized [ 0.472006] loop: module loaded [ 0.472757] megasas: 07.717.02.00-rc1 [ 0.475569] spmi spmi-0: PMIC arbiter version v2 (0x20010000) [ 0.482744] vreg_l1a_1p0: supplied by vreg_s1b_1p025 [ 0.482826] vreg_l9a_1p8: supplied by vph_pwr_bbyp [ 0.482894] vreg_l10a_1p8: supplied by vph_pwr_bbyp [ 0.482966] vreg_l13a_2p95: supplied by vph_pwr_bbyp [ 0.483036] vreg_l17a_2p8: supplied by vph_pwr_bbyp [ 0.483100] vreg_l18a_2p85: supplied by vph_pwr_bbyp [ 0.483162] vreg_l19a_2p8: supplied by vph_pwr_bbyp [ 0.483223] vreg_l20a_2p95: supplied by vph_pwr_bbyp [ 0.483293] vreg_l21a_2p95: supplied by vph_pwr_bbyp [ 0.483356] vreg_l22a_3p0: supplied by vph_pwr_bbyp [ 0.483418] vreg_l23a_2p8: supplied by vph_pwr_bbyp [ 0.483490] vreg_l24a_3p075: supplied by vph_pwr_bbyp [ 0.483558] vreg_l29a_2p8: supplied by vph_pwr_bbyp [ 0.483640] s1: supplied by regulator-dummy [ 0.483871] s2: supplied by regulator-dummy [ 0.484091] s3: supplied by regulator-dummy [ 0.484312] s4: supplied by regulator-dummy [ 0.484527] s5: supplied by regulator-dummy [ 0.485188] s7: supplied by regulator-dummy [ 0.485418] s8: supplied by regulator-dummy [ 0.485643] s11: supplied by regulator-dummy [ 0.485861] s12: supplied by regulator-dummy [ 0.486097] l1: supplied by regulator-dummy [ 0.486329] l2: supplied by regulator-dummy [ 0.486549] l3: supplied by regulator-dummy [ 0.486781] l4: supplied by regulator-dummy [ 0.487005] l6: supplied by regulator-dummy [ 0.487239] l7: supplied by regulator-dummy [ 0.487472] l8: supplied by regulator-dummy [ 0.487705] l9: supplied by regulator-dummy [ 0.487931] l10: supplied by regulator-dummy [ 0.488167] l11: supplied by regulator-dummy [ 0.488397] l12: supplied by regulator-dummy [ 0.488633] l13: supplied by regulator-dummy [ 0.488870] l14: supplied by regulator-dummy [ 0.489139] l15: supplied by regulator-dummy [ 0.489385] l16: supplied by regulator-dummy [ 0.489614] l17: supplied by regulator-dummy [ 0.489853] l18: supplied by regulator-dummy [ 0.490105] l19: supplied by regulator-dummy [ 0.490343] l20: supplied by regulator-dummy [ 0.490581] l21: supplied by regulator-dummy [ 0.490821] l22: supplied by regulator-dummy [ 0.491062] l23: supplied by regulator-dummy [ 0.491303] l24: supplied by regulator-dummy [ 0.491551] l25: supplied by regulator-dummy [ 0.491790] l26: supplied by regulator-dummy [ 0.492036] l27: supplied by regulator-dummy [ 0.492290] l28: supplied by regulator-dummy [ 0.492532] l29: supplied by regulator-dummy [ 0.492783] l30: supplied by regulator-dummy [ 0.493064] l31: supplied by regulator-dummy [ 0.493326] l32: supplied by regulator-dummy [ 0.493552] lvs1: supplied by regulator-dummy [ 0.493785] lvs2: supplied by regulator-dummy [ 0.497455] s1: supplied by regulator-dummy [ 0.497817] VDD_GFX: supplied by vph_pwr [ 0.498107] l1: supplied by regulator-dummy [ 0.500614] tun: Universal TUN/TAP device driver, 1.6 [ 0.501213] VFIO - User Level meta-driver version: 0.3 [ 0.502953] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.502970] ehci-pci: EHCI PCI platform driver [ 0.503003] ehci-platform: EHCI generic platform driver [ 0.503185] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.503215] ohci-pci: OHCI PCI platform driver [ 0.503252] ohci-platform: OHCI generic platform driver [ 0.503711] usbcore: registered new interface driver usb-storage [ 0.506075] i2c_dev: i2c /dev entries driver [ 0.508119] input: pm8941_pwrkey as /devices/platform/soc/400f000.qcom,spmi/spmi-0/0-00/400f000.qcom,spmi:pmic@0:pon@800/400f000.qcom,spmi:pmic@0:pon@800:pwrkey/input/input0 [ 0.509735] input: pm8941_resin as /devices/platform/soc/400f000.qcom,spmi/spmi-0/0-00/400f000.qcom,spmi:pmic@0:pon@800/400f000.qcom,spmi:pmic@0:pon@800:resin/input/input1 [ 0.524798] sdhci: Secure Digital Host Controller Interface driver [ 0.524815] sdhci: Copyright(c) Pierre Ossman [ 0.525436] Synopsys Designware Multimedia Card Interface Driver [ 0.526050] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.528061] usbcore: registered new interface driver usbhid [ 0.528077] usbhid: USB HID core driver [ 0.538523] NET: Registered PF_PACKET protocol family [ 0.538664] 9pnet: Installing 9P2000 support [ 0.538730] Key type dns_resolver registered [ 0.586114] qcom-qmp-phy 34000.phy: Registered Qcom-QMP phy [ 0.586862] qcom-qmp-phy 627000.phy: Registered Qcom-QMP phy [ 0.587913] qcom-qmp-phy 7410000.phy: Registered Qcom-QMP phy [ 0.588625] qcom-qusb2-phy 7411000.phy: Registered Qcom-QUSB2 phy [ 0.589295] qcom-qusb2-phy 7412000.phy: Registered Qcom-QUSB2 phy [ 0.615072] bam-dma-engine 644000.dma: num-channels unspecified in dt [ 0.615092] bam-dma-engine 644000.dma: num-ees unspecified in dt [ 0.616244] bam-dma-engine 7544000.dma: num-channels unspecified in dt [ 0.616262] bam-dma-engine 7544000.dma: num-ees unspecified in dt [ 0.617806] bam-dma-engine 7584000.dma: num-channels unspecified in dt [ 0.617823] bam-dma-engine 7584000.dma: num-ees unspecified in dt [ 0.619547] msm_serial 7570000.serial: msm_serial: detected port #2 [ 0.619585] msm_serial 7570000.serial: uartclk = 19200000 [ 0.619640] 7570000.serial: ttyMSM2 at MMIO 0x7570000 (irq = 76, base_baud = 1200000) is a MSM [ 0.619800] serial serial0: tty port ttyMSM2 registered [ 0.620434] msm_serial 75b0000.serial: msm_serial: detected port #0 [ 0.620469] msm_serial 75b0000.serial: uartclk = 7372800 [ 0.620521] 75b0000.serial: ttyMSM0 at MMIO 0x75b0000 (irq = 80, base_baud = 460800) is a MSM [ 0.620547] msm_serial: console setup on port #0 [ 2.420897] printk: console [ttyMSM0] enabled [ 2.426664] arm-smmu b40000.iommu: probing hardware configuration... [ 2.429850] arm-smmu b40000.iommu: SMMUv2 with: [ 2.436276] arm-smmu b40000.iommu: stage 1 translation [ 2.440502] arm-smmu b40000.iommu: address translation ops [ 2.445713] arm-smmu b40000.iommu: non-coherent table walk [ 2.451261] arm-smmu b40000.iommu: (IDR0.CTTW overridden by FW configuration) [ 2.456819] arm-smmu b40000.iommu: stream matching with 2 register groups [ 2.464137] arm-smmu b40000.iommu: 2 context banks (0 stage-2 only) [ 2.470990] arm-smmu b40000.iommu: Supported page sizes: 0x63315000 [ 2.477478] arm-smmu b40000.iommu: Stage-1: 48-bit VA -> 36-bit IPA [ 2.485657] arm-smmu d00000.iommu: probing hardware configuration... [ 2.490171] arm-smmu d00000.iommu: SMMUv2 with: [ 2.496519] arm-smmu d00000.iommu: stage 1 translation [ 2.500741] arm-smmu d00000.iommu: address translation ops [ 2.505960] arm-smmu d00000.iommu: non-coherent table walk [ 2.511505] arm-smmu d00000.iommu: (IDR0.CTTW overridden by FW configuration) [ 2.517062] arm-smmu d00000.iommu: stream matching with 2 register groups [ 2.524373] arm-smmu d00000.iommu: 2 context banks (0 stage-2 only) [ 2.531229] arm-smmu d00000.iommu: Supported page sizes: 0x63315000 [ 2.537721] arm-smmu d00000.iommu: Stage-1: 32-bit VA -> 36-bit IPA [ 2.537942] Freeing initrd memory: 18300K [ 2.545164] arm-smmu d40000.iommu: probing hardware configuration... [ 2.554303] arm-smmu d40000.iommu: SMMUv2 with: [ 2.560768] arm-smmu d40000.iommu: stage 1 translation [ 2.564984] arm-smmu d40000.iommu: address translation ops [ 2.570195] arm-smmu d40000.iommu: non-coherent table walk [ 2.575739] arm-smmu d40000.iommu: (IDR0.CTTW overridden by FW configuration) [ 2.581300] arm-smmu d40000.iommu: stream matching with 42 register groups [ 2.588621] arm-smmu d40000.iommu: 7 context banks (0 stage-2 only) [ 2.595470] arm-smmu d40000.iommu: Supported page sizes: 0x63315000 [ 2.602044] arm-smmu d40000.iommu: Stage-1: 32-bit VA -> 36-bit IPA [ 2.614562] arm-smmu da0000.iommu: probing hardware configuration... [ 2.614708] arm-smmu da0000.iommu: SMMUv2 with: [ 2.621104] arm-smmu da0000.iommu: stage 1 translation [ 2.625308] arm-smmu da0000.iommu: address translation ops [ 2.630531] arm-smmu da0000.iommu: non-coherent table walk [ 2.636071] arm-smmu da0000.iommu: (IDR0.CTTW overridden by FW configuration) [ 2.641630] arm-smmu da0000.iommu: stream matching with 4 register groups [ 2.648945] arm-smmu da0000.iommu: 2 context banks (0 stage-2 only) [ 2.655799] arm-smmu da0000.iommu: Supported page sizes: 0x63315000 [ 2.662290] arm-smmu da0000.iommu: Stage-1: 32-bit VA -> 36-bit IPA [ 2.670032] arm-smmu 1600000.iommu: probing hardware configuration... [ 2.674980] arm-smmu 1600000.iommu: SMMUv2 with: [ 2.681327] arm-smmu 1600000.iommu: stage 1 translation [ 2.685995] arm-smmu 1600000.iommu: address translation ops [ 2.691287] arm-smmu 1600000.iommu: non-coherent table walk [ 2.696924] arm-smmu 1600000.iommu: (IDR0.CTTW overridden by FW configuration) [ 2.702572] arm-smmu 1600000.iommu: stream matching with 15 register groups [ 2.709623] arm-smmu 1600000.iommu: 12 context banks (0 stage-2 only) [ 2.716906] arm-smmu 1600000.iommu: Supported page sizes: 0x63315000 [ 2.723225] arm-smmu 1600000.iommu: Stage-1: 36-bit VA -> 36-bit IPA [ 2.739625] spi_qup 7575000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64 [ 2.745181] dwc3-qcom 76f8800.usb: IRQ hs_phy_irq not found [ 2.745741] dwc3-qcom 76f8800.usb: IRQ dp_hs_phy_irq not found [ 2.751059] dwc3-qcom 76f8800.usb: IRQ dm_hs_phy_irq not found [ 2.756952] dwc3-qcom 76f8800.usb: IRQ ss_phy_irq not found [ 2.767357] phy phy-7412000.phy.6: QUSB2PHY pll lock failed: status reg = 0 [ 2.768883] phy phy-7412000.phy.6: phy init failed --> -16 [ 2.775211] dwc3 7600000.dwc3: error -EBUSY: failed to initialize core [ 2.780763] dwc3: probe of 7600000.dwc3 failed with error -16 [ 2.788624] i2c_qup 7577000.i2c: using default clock-frequency 100000 [ 2.794892] i2c_qup 75b5000.i2c: using default clock-frequency 100000 [ 2.815103] sdhci_msm 74a4900.sdhci: Got CD GPIO [ 2.835138] qcom-pcie 600000.pcie: host bridge /soc/agnoc@0/pcie@600000 ranges: [ 2.835209] qcom-pcie 600000.pcie: IO 0x000c200000..0x000c2fffff -> 0x000c200000 [ 2.841319] qcom-pcie 600000.pcie: MEM 0x000c300000..0x000cffffff -> 0x000c300000 [ 2.849492] genirq: irq_chip msmgpio did not update eff. affinity mask of irq 106 [ 2.857355] mmc0: SDHCI controller on 74a4900.sdhci [74a4900.sdhci] using ADMA 64-bit [ 3.038800] qcom-pcie 600000.pcie: iATU unroll: disabled [ 3.038829] qcom-pcie 600000.pcie: Detected iATU regions: 32 outbound, 8 inbound [ 3.143348] qcom-pcie 600000.pcie: Link up [ 3.143487] qcom-pcie 600000.pcie: PCI host bridge to bus 0000:00 [ 3.146360] pci_bus 0000:00: root bus resource [bus 00-ff] [ 3.152505] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xc200000-0xc2fffff]) [ 3.157887] pci_bus 0000:00: root bus resource [mem 0x0c300000-0x0cffffff] [ 3.167200] pci 0000:00:00.0: [17cb:0104] type 01 class 0x060400 [ 3.174128] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff] [ 3.180347] pci 0000:00:00.0: PME# supported from D0 D3hot [ 3.189930] pci 0000:01:00.0: [168c:003e] type 00 class 0x028000 [ 3.191935] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit] [ 3.198738] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 3.220274] pci 0000:00:00.0: BAR 14: assigned [mem 0x0c400000-0x0c5fffff] [ 3.220310] pci 0000:00:00.0: BAR 0: assigned [mem 0x0c300000-0x0c300fff] [ 3.226118] pci 0000:01:00.0: BAR 0: assigned [mem 0x0c400000-0x0c5fffff 64bit] [ 3.232973] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 3.240030] pci 0000:00:00.0: bridge window [mem 0x0c400000-0x0c5fffff] [ 3.246632] pcieport 0000:00:00.0: PME: Signaling with IRQ 108 [ 3.253608] qcom-pcie 608000.pcie: supply vddpe-3v3 not found, using dummy regulator [ 3.258202] qcom-pcie 608000.pcie: host bridge /soc/agnoc@0/pcie@608000 ranges: [ 3.265866] qcom-pcie 608000.pcie: IO 0x000d200000..0x000d2fffff -> 0x000d200000 [ 3.272876] qcom-pcie 608000.pcie: MEM 0x000d300000..0x000dffffff -> 0x000d300000 [ 3.390754] qcom-pcie 608000.pcie: iATU unroll: disabled [ 3.390788] qcom-pcie 608000.pcie: Detected iATU regions: 32 outbound, 8 inbound [ 4.396191] qcom-pcie 608000.pcie: Phy link never came up [ 4.396396] qcom-pcie 608000.pcie: PCI host bridge to bus 0001:00 [ 4.400620] pci_bus 0001:00: root bus resource [bus 00-ff] [ 4.406669] pci_bus 0001:00: root bus resource [io 0x100000-0x1fffff] (bus address [0xd200000-0xd2fffff]) [ 4.412051] pci_bus 0001:00: root bus resource [mem 0x0d300000-0x0dffffff] [ 4.421713] pci 0001:00:00.0: [17cb:0104] type 01 class 0x060400 [ 4.428552] pci 0001:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff] [ 4.434791] pci 0001:00:00.0: PME# supported from D0 D3hot [ 4.450341] pci 0001:00:00.0: BAR 0: assigned [mem 0x0d300000-0x0d300fff] [ 4.450386] pci 0001:00:00.0: PCI bridge to [bus 01-ff] [ 4.458487] pcieport 0001:00:00.0: PME: Signaling with IRQ 110 [ 4.462365] qcom-pcie 610000.pcie: supply vddpe-3v3 not found, using dummy regulator [ 4.467312] qcom-pcie 610000.pcie: host bridge /soc/agnoc@0/pcie@610000 ranges: [ 4.475074] qcom-pcie 610000.pcie: IO 0x000e200000..0x000e2fffff -> 0x000e200000 [ 4.482021] qcom-pcie 610000.pcie: MEM 0x000e300000..0x000fffffff -> 0x000e300000 [ 4.598737] qcom-pcie 610000.pcie: iATU unroll: disabled [ 4.598762] qcom-pcie 610000.pcie: Detected iATU regions: 32 outbound, 8 inbound [ 4.703276] qcom-pcie 610000.pcie: Link up [ 4.703449] qcom-pcie 610000.pcie: PCI host bridge to bus 0002:00 [ 4.706291] pci_bus 0002:00: root bus resource [bus 00-ff] [ 4.712441] pci_bus 0002:00: root bus resource [io 0x200000-0x2fffff] (bus address [0xe200000-0xe2fffff]) [ 4.717822] pci_bus 0002:00: root bus resource [mem 0x0e300000-0x0fffffff] [ 4.727481] pci 0002:00:00.0: [17cb:0104] type 01 class 0x060400 [ 4.734329] pci 0002:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff] [ 4.740552] pci 0002:00:00.0: PME# supported from D0 D3hot [ 4.750865] pci 0002:01:00.0: [1969:1083] type 00 class 0x020000 [ 4.752130] pci 0002:01:00.0: reg 0x10: [mem 0x00000000-0x0003ffff 64bit] [ 4.758230] pci 0002:01:00.0: reg 0x18: [io 0x0000-0x007f] [ 4.765120] pci 0002:01:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format) [ 4.770614] pci 0002:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.796492] pci 0002:00:00.0: BAR 14: assigned [mem 0x0e300000-0x0e3fffff] [ 4.796522] pci 0002:00:00.0: BAR 0: assigned [mem 0x0e400000-0x0e400fff] [ 4.802323] pci 0002:00:00.0: BAR 13: assigned [io 0x200000-0x200fff] [ 4.809134] pci 0002:01:00.0: BAR 0: assigned [mem 0x0e300000-0x0e33ffff 64bit] [ 4.815610] pci 0002:01:00.0: BAR 2: assigned [io 0x200000-0x20007f] [ 4.822772] pci 0002:00:00.0: PCI bridge to [bus 01-ff] [ 4.829352] pci 0002:00:00.0: bridge window [io 0x200000-0x200fff] [ 4.834400] pci 0002:00:00.0: bridge window [mem 0x0e300000-0x0e3fffff] [ 4.842876] pcieport 0002:00:00.0: PME: Signaling with IRQ 112 [ 4.848039] atl1c 0002:01:00.0: enabling device (0000 -> 0002) [ 4.854127] atl1c_setup_mac_funcs 718 SLA4000 doesn't support 1G link. [ 4.920241] adreno b00000.gpu: Adding to iommu group 0 [ 4.922158] msm_mdp 901000.mdp: Adding to iommu group 1 [ 4.927628] msm 900000.mdss: supply vdd not found, using dummy regulator [ 4.929884] msm_mdp 901000.mdp: [drm:mdp5_bind] MDP5 version v1.7 [ 4.936416] msm 900000.mdss: bound 901000.mdp (ops mdp5_ops) [ 4.943464] msm 900000.mdss: bound 9a0000.hdmi-tx (ops msm_hdmi_ops) [ 4.948165] adreno b00000.gpu: Detected speed bin 0 [ 4.955245] adreno b00000.gpu: supply vdd not found, using dummy regulator [ 4.959202] adreno b00000.gpu: supply vddcx not found, using dummy regulator [ 4.966152] adreno b00000.gpu: GPU setting to 624000000 [ 4.973405] adreno b00000.gpu: Setting warming state 0 [ 4.978129] adreno b00000.gpu: Setting warming state 1 [ 4.983309] adreno b00000.gpu: Setting warming state 1 [ 4.988464] adreno b00000.gpu: Setting warming state 1 [ 4.996381] msm 900000.mdss: bound b00000.gpu (ops a3xx_ops) [ 5.147099] [drm] Initialized msm 1.8.0 20130625 for 900000.mdss on minor 0 [ 5.147526] msm 900000.mdss: [drm:adreno_request_fw] loaded qcom/a530_pm4.fw from new location [ 5.152965] msm 900000.mdss: [drm:adreno_request_fw] loaded qcom/a530_pfp.fw from new location [ 5.161664] msm 900000.mdss: [drm:adreno_request_fw] loaded qcom/a530v3_gpmu.fw2 from new location [ 5.171267] msm 900000.mdss: [drm:adreno_request_fw] loaded qcom/a530_zap.mdt from new location [ 5.188529] msm 900000.mdss: [drm] Cannot find any crtc or sizes [ 5.190290] ufshcd-qcom 624000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled [ 5.195128] ufshcd-qcom 624000.ufshc: Failed to get reset control -2 [ 5.207724] scsi host0: ufshcd [ 5.211291] ufshcd-qcom 624000.ufshc: ufs_qcom_host_reset: reset control not set [ 5.220863] dwc3-qcom 6af8800.usb: IRQ dp_hs_phy_irq not found [ 5.221321] dwc3-qcom 6af8800.usb: IRQ dm_hs_phy_irq not found [ 5.235987] input: gpio_keys as /devices/platform/gpio_keys/input/input2 [ 5.236504] of_cfs_i��[ 5.269345] scsi 0:0:0:49488: Well-known LUN TOSHIBA THGAF8G9T43BAIRB 0300 PQ: 0 ANSI: 6 [ 5.270971] scsi 0:0:0:49476: Well-known LUN TOSHIBA THGAF8G9T43BAIRB 0300 PQ: 0 ANSI: 6 [ 5.277971] scsi 0:0:0:49456: Well-known LUN TOSHIBA THGAF8G9T43BAIRB 0300 PQ: 0 ANSI: 6 [ 5.287149] scsi 0:0:0:0: Direct-Access TOSHIBA THGAF8G9T43BAIRB 0300 PQ: 0 ANSI: 6 [ 5.295130] scsi 0:0:0:1: Direct-Access TOSHIBA THGAF8G9T43BAIRB 0300 PQ: 0 ANSI: 6 [ 5.295163] sd 0:0:0:0: [sda] 14530560 4096-byte logical blocks: (59.5 GB/55.4 GiB) [ 5.309956] sd 0:0:0:0: [sda] Write Protect is off [ 5.317450] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 5.322218] sd 0:0:0:0: [sda] Optimal transfer size 65536 bytes [ 5.331072] scsi 0:0:0:2: Direct-Access TOSHIBA THGAF8G9T43BAIRB 0300 PQ: 0 ANSI: 6 [ 5.331638] sd 0:0:0:1: [sdb] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB) [ 5.333920] sda: sda1 [ 5.335107] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.337735] scsi 0:0:0:3: Direct-Access TOSHIBA THGAF8G9T43BAIRB 0300 PQ: 0 ANSI: 6 [ 5.338091] sd 0:0:0:2: [sdc] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB) [ 5.338168] sd 0:0:0:2: [sdc] Write Protect is off [ 5.338310] sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 5.338383] sd 0:0:0:2: [sdc] Optimal transfer size 65536 bytes [ 5.341302] sdc: sdc1 [ 5.341534] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 5.341556] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 1 [ 5.341719] xhci-hcd xhci-hcd.2.auto: hcc params 0x0228f665 hci version 0x100 quirks 0x0000000002010010 [ 5.341771] xhci-hcd xhci-hcd.2.auto: irq 115, io mem 0x06a00000 [ 5.342606] hub 1-0:1.0: USB hub found [ 5.342648] hub 1-0:1.0: 1 port detected [ 5.342926] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 5.342938] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 2 [ 5.342948] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed [ 5.343030] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 5.343031] sd 0:0:0:2: [sdc] Attached SCSI disk [ 5.343573] hub 2-0:1.0: USB hub found [ 5.343608] hub 2-0:1.0: 1 port detected [ 5.344877] sd 0:0:0:1: [sdb] Write Protect is off [ 5.353186] scsi 0:0:0:4: Direct-Access TOSHIBA THGAF8G9T43BAIRB 0300 PQ: 0 ANSI: 6 [ 5.353270] sd 0:0:0:3: [sdd] 32768 4096-byte logical blocks: (134 MB/128 MiB) [ 5.353338] sd 0:0:0:3: [sdd] Write Protect is off [ 5.353459] sd 0:0:0:3: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 5.353523] sd 0:0:0:3: [sdd] Optimal transfer size 65536 bytes [ 5.356297] sdd: sdd1 sdd2 sdd3 [ 5.357403] sd 0:0:0:3: [sdd] Attached SCSI disk [ 5.360156] scsi 0:0:0:5: Direct-Access TOSHIBA THGAF8G9T43BAIRB 0300 PQ: 0 ANSI: 6 [ 5.360173] sd 0:0:0:4: [sde] 1048576 4096-byte logical blocks: (4.29 GB/4.00 GiB) [ 5.360236] sd 0:0:0:4: [sde] Write Protect is off [ 5.360352] sd 0:0:0:4: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 5.360412] sd 0:0:0:4: [sde] Optimal transfer size 65536 bytes [ 5.362965] sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27 sde28 sde29 sde30 [ 5.367219] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 5.367225] sd 0:0:0:4: [sde] Attached SCSI disk [ 5.375617] sd 0:0:0:5: [sdf] 8192 4096-byte logical blocks: (33.6 MB/32.0 MiB) [ 5.387561] sd 0:0:0:1: [sdb] Optimal transfer size 65536 bytes [ 5.393344] sd 0:0:0:5: [sdf] Write Protect is off [ 5.496643] sdb: sdb1 [ 5.512167] sd 0:0:0:1: [sdb] Attached SCSI disk [ 5.514588] sd 0:0:0:5: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 5.608702] sd 0:0:0:5: [sdf] Optimal transfer size 65536 bytes [ 5.620560] sdf: sdf1 sdf2 sdf3 sdf4 sdf5 sdf6 sdf7 sdf8 sdf9 [ 5.625279] sd 0:0:0:5: [sdf] Attached SCSI disk [ 5.631686] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 5.633409] EXT4-fs (sda1): write access will be enabled during recovery [ 5.665356] EXT4-fs (sda1): recovery complete [ 5.666296] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 5.668743] VFS: Mounted root (ext4 filesystem) readonly on device 8:1. [ 5.679811] devtmpfs: mounted [ 5.685063] Freeing unused kernel memory: 3200K [ 5.687678] Run /sbin/init as init process [ 5.849468] systemd[1]: System time before build time, advancing clock. [ 5.921079] NET: Registered PF_INET6 protocol family [ 5.922574] Segment Routing with IPv6 [ 5.925190] In-situ OAM (IOAM) with IPv6 [ 5.950210] systemd[1]: Configuration file /etc/systemd/system.conf is marked executable. Please remove executable permission bits. Proceeding anyway. [ 5.950274] systemd[1]: Configuration file /etc/systemd/system.conf is marked world-writable. Please remove world writability permission bits. Proceeding anyway. Welcome to Debian GNU/Linux 10 (buster)! Failed to bump fs.file-max, ignoring: Invalid argument File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 6.213192] msm 900000.mdss: [drm] Cannot find any crtc or sizes Configuration file /etc/systemd/system/systemd-udevd.service is marked executable. Please remove executable permission bits. Proceeding anyway. Configuration file /etc/systemd/system/systemd-udevd.service is marked world-writable. Please remove world writability permission bits. Proceeding anyway. Configuration file /etc/systemd/system/sla_vtstart.service is marked executable. Please remove executable permission bits. Proceeding anyway. Configuration file /etc/systemd/system/sla_vtstart.service is marked world-writable. Please remove world writability permission bits. Proceeding anyway. Configuration file /etc/systemd/system/sla_rtsp.service is marked executable. Please remove executable permission bits. Proceeding anyway. Configuration file /etc/systemd/system/sla_rtsp.service is marked world-writable. Please remove world writability permission bits. Proceeding anyway. Configuration file /etc/systemd/system/sla_init.service is marked executable. Please remove executable permission bi[ 6.393430] random: systemd: uninitialized urandom read (16 bytes read) ts. Proceeding anyway. Configuration file /etc/systemd/system/s[ 6.408039] random: systemd: uninitialized urandom read (16 bytes read) [ 6.413918] random: systemd: uninitialized urandom read (16 bytes read) la_Discover.service is marked executable. Please remove executable permission bits. Proceeding anyway. [ OK ] Listening on Syslog Socket. [ OK ] Listening on initctl Compatibility Named Pipe. [ OK ] Reached target Swap. [ OK ] Started Forward Password R���uests to Wall Directory Watch. [ OK ] Created slice system-serial\x2dgetty.slice. [ OK ] Created slice User and Session Slice. [ OK ] Reached target Slices. [ OK ] Listening on Network Service Netlink Socket. [ OK ] Listening on Journal Audit Socket. [ OK ] Listening on Journal Socket. Starting nftables... Starting Wait Until Kernel Time Synchronized... Starting Load Kernel Modules... Mounting Huge Pages File System... Mounting Kernel Debug File System... [ OK ] Reached target Remote File Systems. Starting Nameserver information manager... Mounting POSIX Message Queue File System... [ OK ] Reached target Remote Encrypted Volumes. Starting Set the console keyboard layout... [ OK ] Listening on udev Control Socket. [ OK ] Listening on fsck to fsckd communication Socket. Starting File System Check on Root Device... [ OK ] Listening on Journal Socket (/dev/log). Starting Journal Service... [ OK ] Listening on udev Kernel Socket. Starting udev Coldplug all Devices... Starting Create list of re���odes for the current kernel... Starting Wait for network to be configured by ifupdown... [ OK ] Started Load Kernel Modules. [ OK ] Mounted Huge Pages File System. [ OK ] Mounted Kernel Debug File System. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Started File System Check Daemon to report status. Starting Apply Kernel Variables... Mounting Kernel Configuration File System... nftables.service: Failed with result 'exit-code'. [FAILED] Failed to start nftables. See 'systemctl status nftables.service' for details. [ OK ] Started Create list of req��� nodes for the current kernel. [ OK ] Started Nameserver information manager. [ OK ] Started Apply Kernel Variables. [ OK ] Mounted Kernel Configuration File System. [ OK ] Reached target Network (Pre). [ OK ] Started File System Check on Root Device. Starting Remount Root and Kernel File Systems... [ 6.755267] EXT4-fs (sda1): re-mounted. Opts: data=ordered. Quota mode: none. [ OK ] Started Remount Root and Kernel File Systems. Starting Load/Save Random Seed... Starting Create System Users... [ OK ] Started Load/Save Random Seed. [ OK ] Started Create System Users. Starting Create Static Device Nodes in /dev... [ OK ] Started Set the console keyboard layout. [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). [ OK ] Reached target Local File Systems. Starting Tell Plymouth To Write Out Runtime Data... Starting Set console font and keymap... Starting Enable support fo���l executable binary formats... Starting udev Kernel Device Manager... [ OK ] Started Journal Service. [ OK ] Started Tell Plymouth To Write Out Runtime Data. [ OK ] Started Set console font and keymap. [ OK ] Started Enable support for���nal executable binary formats. [ OK ] Started udev Kernel Device Manager. Starting Network Service... Starting Flush Journal to Persistent Storage... [ 7.170958] systemd-journald[195]: Received request to flush runtime journal from PID 1 [ OK ] Started Flush Journal to Persistent Storage. Starting Create Volatile Files and Directories... [ OK ] Started Network Service. [ OK ] Started Create Volatile Files and Directories. [ 7.441706] random: systemd-journal: uninitialized urandom read (16 bytes read) Starting Network Time Synchronization... [ 7.465366] random: systemd: uninitialized urandom read (16 bytes read) Starting Update UTMP about System Boot/Shutdown... [ 7.523183] random: systemd-journal: uninitialized urandom read (16 bytes read) [ OK ] Started Entropy daemon using the HAVEGE algorithm. Starting Network Name Resolution... [ OK ] Started Network Time Synchronization. [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started Network Name Resolution. [ OK ] Reached target Host and Network Name Lookups. [ OK ] Started udev Coldplug all Devices. Starting Helper to synchronize boot up for ifupdown... [ 8.476969] random: systemd-journal: uninitialized urandom read (16 bytes read) [ 8.497594] random: systemd: uninitialized urandom read (16 bytes read) Starting Show Plymouth Boot Screen... [ 8.587417] random: systemd-journal: uninitialized urandom read (16 bytes read) [ OK ] Started Helper to synchronize boot up for ifupdown. [ OK ] Started Show Plymouth Boot Screen. [ 9.030995] rtc-pm8xxx 400f000.qcom,spmi:pmic@0:rtc@6000: registered as rtc0 [ 9.031086] rtc-pm8xxx 400f000.qcom,spmi:pmic@0:rtc@6000: setting system clock to 1970-01-30T21:56:40 UTC (2584600) [ 9.209825] mc: Linux media interface: v0.10 [ 9.308287] videodev: Linux video capture interface: v2.00 [ 9.310401] max310x 1-006c: uart info major=204, minor = 209, nr=4 name=ttyMAX0 [ 9.312681] max310x 1-006c: LINE=1715 [ 9.320796] 1-006c: ttyMAX00 at I/O 0x6c (irq = 117, base_baud = 2764800) is a MAX14830 [ 9.341410] qcom_q6v5_pas 9300000.remoteproc: supply cx not found, using dummy regulator [ 9.341828] qcom_q6v5_pas 9300000.remoteproc: supply px not found, using dummy regulator [ 9.361178] 1-006c: ttyMAX01 at I/O 0x5c (irq = 117, base_baud = 2764800) is a MAX14830 [ 9.395394] 1-006c: ttyMAX02 at I/O 0x2c (irq = 117, base_baud = 2764800) is a MAX14830 [ 9.402704] remoteproc remoteproc0: 9300000.remoteproc is available [ 9.403676] remoteproc remoteproc0: Direct firmware load for qcom/apq8096/adsp.mbn failed with error -2 [ 9.408611] remoteproc remoteproc0: powering up 9300000.remoteproc [ 9.418207] remoteproc remoteproc0: Direct firmware load for qcom/apq8096/adsp.mbn failed with error -2 [ 9.424201] remoteproc remoteproc0: request_firmware failed: -2 [ 9.495656] random: systemd: uninitialized urandom read (16 bytes read) [ 9.501914] 1-006c: ttyMAX03 at I/O 0x1c (irq = 117, base_baud = 2764800) is a MAX14830 [ 9.525656] qcom-venus c00000.video-codec: Adding to iommu group 2 [ 9.549243] qcom-camss a34000.camss: Adding to iommu group 3 [ 9.640970] max310x 3-0061: MAX14830 ID 0x00 does not match [ 9.722610] atl1c 0002:01:00.0 enP2p1s0: renamed from eth0 [ 10.141527] qcom-camss a34000.camss: VFE HW Version = 0x70020000 [ 10.166892] qcom-camss a34000.camss: VFE HW Version = 0x70020000 [ 10.167187] MT9034 at address 0x3b [ 10.172287] qcom-camss a34000.camss: VFE HW Version = 0x70020000 [ 10.175647] qcom-camss a34000.camss: VFE HW Version = 0x70020000 [ 10.176842] mt9034 5-003b: MT9034 detected at address 0x3b [ 10.187494] qcom-camss a34000.camss: VFE HW Version = 0x70020000 [ 10.194460] qcom-camss a34000.camss: VFE HW Version = 0x70020000 [ 10.209413] qcom-camss a34000.camss: VFE HW Version = 0x70020000 [ 10.209608] qcom-camss a34000.camss: VFE HW Version = 0x70020000 [ 10.229734] mt9034 5-003b: mt9034_set_format: Enter [ 10.229813] mt9034 5-003b: mt9034_set_format: width=640 height=720 type=1 [ 10.236633] MT9034 at address 0x3a [ 10.240576] mt9034 5-003a: MT9034 detected at address 0x3a [ 10.289763] mt9034 5-003a: mt9034_set_format: Enter [ 10.289832] mt9034 5-003a: mt9034_set_format: width=640 height=720 type=1 [ OK ] Found device /dev/ttyMSM0. [ OK ] Listening on Load/Save RF ���itch Status /dev/rfkill Watch. [ OK ] Started ifup for enP2p1s0. [ OK ] Started Forward Password R���s to Plymouth Directory Watch. [ OK ] Reached target Local Encrypted Volumes. [ OK ] Reached target System Initialization. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Listening on OpenBSD Secure Shell server socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Paths. [ OK ] Reached target Basic System. Starting Restore /etc/reso��� the ppp link was shut down... Starting Login Service... Starting QRTR service... Starting Modem Manager... [ OK ] Started D-Bus System Message Bus. Starting Network Manager... Starting LSB: Load kernel ���d to enable cpufreq scaling... Starting System Logging Service... Starting Initialize hardware monitoring sensors... [ OK ] Started Regular background program processing daemon. Starting Raise network interfaces... [ OK ] Started Wait for network to be configured by ifupdown. [ OK ] Started Restore /etc/resol���re the ppp link was shut down. [ OK ] Started QRTR service. [ OK ] Started System Logging Service. [ OK ] Started Initialize hardware monitoring sensors. [ OK ] Started Login Service. Starting Authorization Manager... [ 12.979847] atl1c 0002:01:00.0: atl1c: enP2p1s0 NIC Link is Up<100 Mbps Full Duplex> [ OK ] Started Network Manager. [ OK ] Started Authorization Manager. [ OK ] Started LSB: Load kernel m���ded to enable cpufreq scaling. Starting LSB: set CPUFreq kernel parameters... Starting Hostname Service... [ OK ] Started Raise network interfaces. [ OK ] Reached target Network. [ OK ] Reached target Network is Online. [ OK ] Started SLA RTSP Service. [ OK ] Started SLA Discover Service. Starting SLA specific startup script... Starting /etc/rc.local Compatibility... Starting vsftpd FTP server... Starting Permit User Sessions... [ OK ] Started /etc/rc.local Compatibility. [ OK ] Started vsftpd FTP server. [ OK ] Started Permit User Sessions. [ OK ] Started Modem Manager. [ OK ] Started Hostname Service. Starting Hold until boot process finishes up... Starting Terminate Plymouth Boot Screen... [ OK ] Started LSB: set CPUFreq kernel parameters. [ OK ] Started Hold until boot process finishes up. [ OK ] Started Terminate Plymouth Boot Screen. [ 17.121678] export_store: invalid GPIO 448 Debian GNU/Linux 10 sla-alip ttyMSM0 sla-alip login: root (automatic login) Last login: Fri Jan 30 13:54:37 PST 1970 on ttyMSM0 Linux sla-alip 5.15.0-ifc6601-arm64 #6 SMP PREEMPT Wed Apr 5 12:51:30 PDT 2023 aarch64 The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. root@sla-alip:~# [ 33.565056] random: crng init done [ 33.565120] random: 859 urandom warning(s) missed due to ratelimiting [ 44.186437] qcom-camss a34000.camss: Failed to add VFE#0 to power domain [ 44.186515] qcom-camss a34000.camss: Failed to power up pipeline: -22 [ 44.189179] qcom-camss a34000.camss: Failed to add VFE#0 to power domain [ 44.199654] qcom-camss a34000.camss: Failed to power up pipeline: -22 [ 44.199684] qcom-camss a34000.camss: VFE HW Version = 0x70020000 [ 44.240879] qcom-camss a34000.camss: VFE HW Version = 0x70020000 [ 44.299848] qcom-camss a34000.camss: VFE HW Version = 0x70020000 [ 44.300872] qcom-camss a34000.camss: VFE HW Version = 0x70020000 [ 44.362413] qcom-camss a34000.camss: VFE HW Version = 0x70020000 [ 44.362533] qcom-camss a34000.camss: VFE HW Version = 0x70020000 [ 44.913460] * Cam:0 FPGALoad As Background Task: GEN_HD [ 44.913460] [ 51.964769] * Cam:0 FPGALoad Succeeded in the Background: GEN_HD [ 51.964769] [ 52.167657] qcom-camss a34000.camss: VFE HW Version = 0x70020000 [ 52.168329] qcom-camss a34000.camss: VFE HW Version = 0x70020000 [ 52.173560] qcom-camss a34000.camss: VFE HW Version = 0x70020000 [ 52.179388] qcom-camss a34000.camss: VFE HW Version = 0x70020000 [ 52.185440] qcom-camss a34000.camss: VFE HW Version = 0x70020000 [ 52.192737] qcom-camss a34000.camss: VFE HW Version = 0x70020000 [ 52.197453] qcom-camss a34000.camss: VFE HW Version = 0x70020000 [ 52.203375] qcom-camss a34000.camss: VFE HW Version = 0x70020000 [ 52.722692] VTNext pid=816 [ 53.355500] qcom-camss a34000.camss: VFE HW Version = 0x70020000 [ 53.464143] qcom-camss a34000.camss: VFE HW Version = 0x70020000 [ 53.490694] qcom-camss a34000.camss: VFE HW Version = 0x70020000 [ 53.517190] qcom-camss a34000.camss: VFE HW Version = 0x70020000 [ 53.543970] qcom-camss a34000.camss: VFE HW Version = 0x70020000 [ 53.574000] qcom-camss a34000.camss: VFE HW Version = 0x70020000 [ 54.185516] [drm:a5xx_pm_resume] *ERROR* A530: timeout waiting for RBCCU GDSC enable: 0 [ 54.194779] msm_hdmi_hdcp_read_validate_aksv: AKSV QFPROM doesn't have 20 1's, 20 0's [ 54.194858] msm_hdmi_hdcp_read_validate_aksv: QFPROM AKSV chk failed (AKSV=6800000000) [ 54.195316] [drm:mdp5_irq_error_handler] *ERROR* errors: 40000000 [ 54.201685] msm_hdmi_hdcp_auth_prepare: ASKV validation failed [ 54.215873] msm_hdmi_hdcp_auth_work: auth prepare failed -524 [ 54.221373] msm_hdmi_hdcp_auth_work: hdcp is not supported [ 55.185041] [drm:adreno_idle] *ERROR* A530: timeout waiting to drain ringbuffer 0 rptr/wptr = 0/C [ 55.185171] adreno b00000.gpu: GPU setting to 560000000 Format: Log Type - Time(microsec) - Message - Optional Info Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic S - QC_IMAGE_VERSION_STRING=BOOT.XF.1.0-00301 S - IMAGE_VARIANT_STRING=M8996LAB S - OEM_IMAGE_VERSION_STRING=crm-ubuntu68 S - Boot Interface: UFS S - Secure Boot: Off S - Boot Config @ 0x00076044 = 0x000001c9 S - JTAG ID @ 0x000760f4 = 0x4003e0e1 S - OEM ID @ 0x000760f8 = 0x00000000 S - Serial Number @ 0x00074138 = 0xef287e8e S - OEM Config Row 0 @ 0x00074188 = 0x0000000000000000 S - OEM Config Row 1 @ 0x00074190 = 0x0000000000000000 S - Feature Config Row 0 @ 0x000741a0 = 0x0050000010000100 S - Feature Config Row 1 @ 0x000741a8 = 0x00fff00001ffffff S - Core 0 Frequency, 1228 MHz B - 0 - PBL, Start B - 10413 - bootable_media_detect_entry, Start B - 47055 - bootable_media_detect_success, Start B - 47059 - elf_loader_entry, Start B - 48088 - auth_hash_seg_entry, Start B - 48189 - auth_hash_seg_exit, Start B - 79984 - elf_segs_hash_verify_entry, Start B - 82486 - PBL, End B - 84668 - SBL1, Start B - 180743 - usb: hs_phy_nondrive_start B - 181109 - usb: PLL lock success - 0x3 B - 184098 - usb: hs_phy_nondrive_finish B - 188246 - boot_flash_init, Start D - 0 - boot_flash_init, Delta B - 195352 - sbl1_ddr_set_default_params, Start D - 0 - sbl1_ddr_set_default_params, Delta B - 203343 - boot_config_data_table_init, Start D - 98667 - boot_config_data_table_init, Delta - (60 Bytes) B - 306555 - CDT Version:3,Platform ID:24,Major ID:1,Minor ID:0,Subtype:0 B - 311222 - Image Load, Start D - 22448 - PMIC Image Loaded, Delta - (37272 Bytes) B - 333670 - pm_device_init, Start B - 339465 - PON REASON:PM0:0x200000020020 PM1:0x200a0 B - 375882 - PM_SET_VAL:Skip D - 40046 - pm_device_init, Delta B - 377803 - pm_driver_init, Start D - 2897 - pm_driver_init, Delta B - 384391 - pm_sbl_chg_init, Start D - 91 - pm_sbl_chg_init, Delta B - 391162 - vsense_init, Start D - 30 - vsense_init, Delta B - 398970 - Pre_DDR_clock_init, Start D - 366 - Pre_DDR_clock_init, Delta B - 404765 - ddr_initialize_device, Start B - 408456 - 8996 v3.x detected, Max frequency = 1.8 GHz B - 414891 - ddr_initialize_device, Delta B - 418063 - Basic DDR tests done B - 1998573 - clock_init, Start D - 244 - clock_init, Delta B - 2000586 - Image Load, Start D - 6649 - QSEE Dev Config Image Loaded, Delta - (46008 Bytes) B - 2007479 - Image Load, Start D - 5246 - APDP Image Loaded, Delta - (0 Bytes) B - 2037186 - usb: fedl, vbus_low B - 2037247 - Image Load, Start D - 10706 - XBLRamDump Image Loaded, Delta - (342782 Bytes) B - 2102548 - usb: init start B - 2104347 - usb: PLL lock success , 0x2