Format: Log Type - Time(microsec) - Message - Optional Info Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic S - QC_IMAGE_VERSION_STRING=BOOT.XF.1.0-00301 S - IMAGE_VARIANT_STRING=M8996LAB S - OEM_IMAGE_VERSION_STRING=crm-ubuntu68 S - Boot Interface: UFS S - Secure Boot: Off S - Boot Config @ 0x00076044 = 0x000001c9 S - JTAG ID @ 0x000760f4 = 0x4003e0e1 S - OEM ID @ 0x000760f8 = 0x00000000 S - Serial Number @ 0x00074138 = 0xbe8b8597 S - OEM Config Row 0 @ 0x00074188 = 0x0000000000000000 S - OEM Config Row 1 @ 0x00074190 = 0x0000000000000000 S - Feature Config Row 0 @ 0x000741a0 = 0x0050000010000100 S - Feature Config Row 1 @ 0x000741a8 = 0x00fff00001ffffff S - Core 0 Frequency, 1228 MHz B - 0 - PBL, Start B - 10413 - bootable_media_detect_entry, Start B - 50192 - bootable_media_detect_success, Start B - 50193 - elf_loader_entry, Start B - 51774 - auth_hash_seg_entry, Start B - 51877 - auth_hash_seg_exit, Start B - 85172 - elf_segs_hash_verify_entry, Start B - 87676 - PBL, End B - 89700 - SBL1, Start B - 185714 - usb: hs_phy_nondrive_start B - 186050 - usb: PLL lock success - 0x3 B - 189039 - usb: hs_phy_nondrive_finish B - 193187 - boot_flash_init, Start D - 30 - boot_flash_init, Delta B - 200293 - sbl1_ddr_set_default_params, Start D - 30 - sbl1_ddr_set_default_params, Delta B - 208254 - boot_config_data_table_init, Start D - 159149 - boot_config_data_table_init, Delta - (60 Bytes) B - 371917 - CDT Version:3,Platform ID:24,Major ID:1,Minor ID:0,Subtype:0 B - 376614 - Image Load, Start D - 22509 - PMIC Image Loaded, Delta - (37272 Bytes) B - 399123 - pm_device_init, Start B - 404887 - PON REASON:PM0:0x60 PM1:0x20 B - 441304 - PM_SET_VAL:Skip D - 40046 - pm_device_init, Delta B - 443226 - pm_driver_init, Start D - 2928 - pm_driver_init, Delta B - 449814 - pm_sbl_chg_init, Start D - 91 - pm_sbl_chg_init, Delta B - 456585 - vsense_init, Start D - 0 - vsense_init, Delta B - 466497 - Pre_DDR_clock_init, Start D - 366 - Pre_DDR_clock_init, Delta B - 470218 - ddr_initialize_device, Start B - 473909 - 8996 v3.x detected, Max frequency = 1.8 GHz B - 483547 - ddr_initialize_device, Delta B - 483577 - DDR ID, Rank 0, Rank 1, 0x6, 0x300, 0x300 B - 487390 - Basic DDR tests done B - 556137 - clock_init, Start D - 244 - clock_init, Delta B - 559522 - Image Load, Start D - 4362 - QSEE Dev Config Image Loaded, Delta - (46008 Bytes) B - 564951 - Image Load, Start D - 5338 - APDP Image Loaded, Delta - (0 Bytes) B - 573583 - usb: UFS Serial - 34b19bcc B - 577944 - usb: fedl, vbus_low B - 581574 - Image Load, Start D - 55174 - QSEE Image Loaded, Delta - (1640572 Bytes) B - 636748 - Image Load, Start D - 2043 - SEC Image Loaded, Delta - (4096 Bytes) B - 644312 - sbl1_efs_handle_cookies, Start D - 488 - sbl1_efs_handle_cookies, Delta B - 652822 - Image Load, Start D - 14365 - QHEE Image Loaded, Delta - (254184 Bytes) B - 667218 - Image Load, Start D - 14060 - RPM Image Loaded, Delta - (223900 Bytes) B - 682102 - Image Load, Start D - 3202 - STI Image Loaded, Delta - (0 Bytes) B - 688842 - Image Load, Start D - 34739 - APPSBL Image Loaded, Delta - (748620 Bytes) B - 723612 - SBL1, End D - 638182 - SBL1, Delta S - Flash Throughput, 96000 KB/s (2958928 Bytes, 30642 us) S - DDR Frequency, 1017 MHz Android Bootloader - UART_DM Initialized!!! [0] BUILD_VERSION= [0] BUILD_DATE=00:23:52 - May 7 2022 [0] welcome to lk [10] platform_init() [10] target_init() [10] RPM GLink Init [10] Opening RPM Glink Port success [10] Opening SSR Glink Port success [20] Glink Connection between APPS and RPM established [20] Glink Connection between APPS and RPM established [40] UFS init success [80] Qseecom Init Done in Appsbl [80] secure app region addr=0x86600000 size=0x2200000[90] TZ App region notif returned with status:0 addr:86600000 size:35651584 [90] TZ App log region register returned with status:0 addr:916d4000 size:4096 [100] Qseecom TZ Init Done in Appsbl [120] Loading cmnlib done [120] qseecom_start_app: Loading app keymaster for the first time' [150] <8>keymaster: "\"KEYMASTER Init \"" [160] Setting display_panel to none [160] Selected panel: none Skip panel configuration [160] pm8x41_get_is_cold_boot: cold boot [170] Unable to locate /bootselect partition [170] boot_verifier: Device is in ORANGE boot state. [180] Device is unlocked! Skipping verification... [180] Loading (boot) image (13639680): start [240] Loading (boot) image (13639680): done [240] use_signed_kernel=1, is_unlocked=1, is_tampered=0. [240] Your device has been unlocked and can't be trusted. [250] mdtp: mdtp_img loaded [250] mdtp: is_test_mode: test mode is set to 1 [260] mdtp: read_metadata: SUCCESS [280] LK SEC APP Handle: 0x1 [280] Return value from recv_data: 14 [290] Return value from recv_data: 14 [300] Return value from recv_data: 14 [310] decompressing kernel image: start [710] decompressing kernel image: done [720] qcom,msm-id entry not found [720] Only one appended non-skales DTB, select it. [730] cmdline: ignore_loglevel console=ttyMSM0,115200n8 root=/dev/sda1 rootwait maxcpus=2 androidboot.bootdevice=624000.ufshc androidboot.verifiedbootstate=orange androidboot.veritymode=enforcing androidboot.serialno=34b19bcc androidboot.baseband=apq mdss_mdp.p[750] Updating device tree: start [750] Updating device tree: done [760] Return value from recv_data: 14 [770] RPM GLINK UnInit [770] Qseecom De-Init Done in Appsbl [770] booting linux @ 0x80080000, ramdisk @ 0x92902000 (0), tags/device tree @ 0x85600000 [780] Jumping to kernel via monitor [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x511f2112] [ 0.000000] Linux version 5.15.54-00037-gfbffff077804 (lumag@eriador) (aarch64-linux-gnu-gcc (Debian 11.3.0-3) 11.3.0, GNU ld (GNU Binutils for Debian) 2.38.50.20220707) #1206 SMP PREEMPT Tue Jul 19 12:02:38 MSK 2022 [ 0.000000] Machine model: Qualcomm Technologies, Inc. DB820c [ 0.000000] printk: debug: ignoring loglevel setting. [ 0.000000] efi: UEFI not found. [ 0.000000] [Firmware Bug]: Kernel image misaligned at boot, please fix your bootloader! [ 0.000000] OF: reserved mem: OVERLAP DETECTED! [ 0.000000] gpu@8f200000 (0x0000000090b00000--0x0000000091500000) overlaps with slpi@90b00000 (0x0000000090b00000--0x0000000091500000) [ 0.000000] Reserved memory: created DMA memory pool at 0x0000000090b00000, size 10 MiB [ 0.000000] OF: reserved mem: initialized node gpu@8f200000, compatible id shared-dma-pool [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x000000015ea4ffff] [ 0.000000] NUMA: NODE_DATA [mem 0x15e44cc00-0x15e44efff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000015ea4ffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000857fffff] [ 0.000000] node 0: [mem 0x0000000085800000-0x00000000916fffff] [ 0.000000] node 0: [mem 0x0000000091700000-0x00000000a1dfffff] [ 0.000000] node 0: [mem 0x00000000a1e00000-0x00000000a1ffffff] [ 0.000000] node 0: [mem 0x00000000a2000000-0x00000000dfffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000015ea4ffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000015ea4ffff] [ 0.000000] On node 0, zone Normal: 5552 pages in unavailable ranges [ 0.000000] cma: Reserved 32 MiB at 0x00000000de000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] psci: OSI mode supported. [ 0.000000] percpu: Embedded 20 pages/cpu s41816 r8192 d31912 u81920 [ 0.000000] pcpu-alloc: s41816 r8192 d31912 u81920 alloc=20*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Qualcomm Technologies Falkor/Kryo erratum 1003 [ 0.000000] CPU features: detected: Qualcomm erratum 1009, or ARM erratum 1286807 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 768678 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: ignore_loglevel console=ttyMSM0,115200n8 root=/dev/sda1 rootwait maxcpus=2 androidboot.bootdevice=624000.ufshc androidboot.verifiedbootstate=orange androidboot.veritymode=enforcing androidboot.serialno=34b19bcc androidboot.baseband=apq mdss_mdp.panel=0 [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000da000000-0x00000000de000000] (64MB) [ 0.000000] Memory: 2726324K/3123520K available (18048K kernel code, 3252K rwdata, 9868K rodata, 6784K init, 504K bss, 364428K reserved, 32768K cma-reserved) [ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: enabling workaround for GICv3: Qualcomm MSM8996 broken firmware [ 0.000000] GICv3: 608 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: GICv4 features: [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000009c00000 [ 0.000000] ITS: No ITS available, not enabling LPIs [ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000155] Console: colour dummy device 80x25 [ 0.000233] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [ 0.000246] pid_max: default: 32768 minimum: 301 [ 0.000302] LSM: Security Framework initializing [ 0.000393] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.000409] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.001977] rcu: Hierarchical SRCU implementation. [ 0.004654] EFI services will not be available. [ 0.004989] smp: Bringing up secondary CPUs ... [ 0.005812] Detected PIPT I-cache on CPU1 [ 0.005849] GICv3: CPU1: found redistributor 1 region 0:0x0000000009c40000 [ 0.005906] CPU1: Booted secondary processor 0x0000000001 [0x511f2112] [ 0.006028] smp: Brought up 1 node, 2 CPUs [ 0.006044] SMP: Total of 2 processors activated. [ 0.006051] CPU features: detected: 32-bit EL0 Support [ 0.006057] CPU features: detected: 32-bit EL1 Support [ 0.006064] CPU features: detected: CRC32 instructions [ 0.035455] CPU: All CPU(s) started at EL1 [ 0.035543] alternatives: patching kernel code [ 0.037031] devtmpfs: initialized [ 0.046791] KASLR disabled due to lack of seed [ 0.046990] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.047010] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.047494] pinctrl core: initialized pinctrl subsystem [ 0.048437] DMI not present or invalid. [ 0.048991] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.050148] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations [ 0.050265] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.050421] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.050483] audit: initializing netlink subsys (disabled) [ 0.050660] audit: type=2000 audit(0.048:1): state=initialized audit_enabled=0 res=1 [ 0.051966] thermal_sys: Registered thermal governor 'step_wise' [ 0.051981] thermal_sys: Registered thermal governor 'power_allocator' [ 0.053447] cpuidle: using governor menu [ 0.053535] NET: Registered PF_QIPCRTR protocol family [ 0.053693] hw-breakpoint: found 8 breakpoint and 4 watchpoint registers. [ 0.053774] ASID allocator initialised with 32768 entries [ 0.055423] Serial: AMBA PL011 UART driver [ 0.074908] platform 627000.phy: Fixing up cyclic dependency with 624000.ufshc [ 0.101198] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.101218] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.101225] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.101232] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.102605] cryptd: max_cpu_qlen set to 1000 [ 0.105271] ACPI: Interpreter disabled. [ 0.107533] iommu: Default domain type: Translated [ 0.107553] iommu: DMA domain TLB invalidation policy: strict mode [ 0.107838] vgaarb: loaded [ 0.108104] SCSI subsystem initialized [ 0.108316] libata version 3.00 loaded. [ 0.108523] usbcore: registered new interface driver usbfs [ 0.108557] usbcore: registered new interface driver hub [ 0.108588] usbcore: registered new device driver usb [ 0.109385] mc: Linux media interface: v0.10 [ 0.109414] videodev: Linux video capture interface: v2.00 [ 0.109469] pps_core: LinuxPPS API ver. 1 registered [ 0.109476] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.109489] PTP clock support registered [ 0.109617] EDAC MC: Ver: 3.0.0 [ 0.110108] CPUidle PSCI: failed to enable OSI mode: -95 [ 0.111122] qcom_scm: convention: smc arm 64 [ 0.113411] FPGA manager framework [ 0.113526] Advanced Linux Sound Architecture Driver Initialized. [ 0.113984] Bluetooth: Core ver 2.22 [ 0.114025] NET: Registered PF_BLUETOOTH protocol family [ 0.114032] Bluetooth: HCI device and connection manager initialized [ 0.114042] Bluetooth: HCI socket layer initialized [ 0.114050] Bluetooth: L2CAP socket layer initialized [ 0.114066] Bluetooth: SCO socket layer initialized [ 0.114634] clocksource: Switched to clocksource arch_sys_counter [ 0.114888] VFS: Disk quotas dquot_6.6.0 [ 0.114937] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.115109] pnp: PnP ACPI: disabled [ 0.121316] NET: Registered PF_INET protocol family [ 0.121472] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.124039] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.124074] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.124087] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.124189] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.124324] TCP: Hash tables configured (established 32768 bind 32768) [ 0.124434] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.124475] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.124631] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.125099] RPC: Registered named UNIX socket transport module. [ 0.125114] RPC: Registered udp transport module. [ 0.125120] RPC: Registered tcp transport module. [ 0.125125] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.125715] PCI: CLS 0 bytes, default 64 [ 0.126162] kvm [1]: HYP mode not available [ 0.127063] vreg_s3a_1p3: Bringing 0uV into 1300000-1300000uV [ 0.127254] vreg_s3a_1p3: supplied by vph_pwr [ 0.127342] vreg_s4a_1p8: Bringing 0uV into 1800000-1800000uV [ 0.127367] vreg_s4a_1p8: supplied by vph_pwr [ 0.127896] vreg_s5a_2p15: Bringing 0uV into 2150000-2150000uV [ 0.128031] vreg_s5a_2p15: supplied by vph_pwr [ 0.128123] vreg_s7a_1p0: Bringing 0uV into 800000-800000uV [ 0.128257] vreg_s7a_1p0: supplied by vph_pwr [ 0.128355] vreg_l1a_1p0: Bringing 0uV into 1000000-1000000uV [ 0.128543] vreg_l2a_1p25: Bringing 0uV into 1250000-1250000uV [ 0.128691] vreg_l2a_1p25: supplied by vreg_s3a_1p3 [ 0.128789] vreg_l3a_0p875: Bringing 0uV into 850000-850000uV [ 0.128930] vreg_l3a_0p875: supplied by vreg_s3a_1p3 [ 0.129019] vreg_l4a_1p225: Bringing 0uV into 1225000-1225000uV [ 0.129169] vreg_l4a_1p225: supplied by vreg_s3a_1p3 [ 0.129257] vreg_l6a_1p2: Bringing 0uV into 1200000-1200000uV [ 0.129489] vreg_l6a_1p2: supplied by vreg_s5a_2p15 [ 0.129586] vreg_l8a_1p8: Bringing 0uV into 1800000-1800000uV [ 0.129734] vreg_l8a_1p8: supplied by vph_pwr [ 0.129828] vreg_l9a_1p8: Bringing 0uV into 1800000-1800000uV [ 0.129967] Initialise system trusted keyrings [ 0.130029] vreg_l10a_1p8: Bringing 0uV into 1800000-1800000uV [ 0.130156] workingset: timestamp_bits=42 max_order=20 bucket_order=0 [ 0.130225] vreg_l11a_1p15: Bringing 0uV into 1150000-1150000uV [ 0.130371] vreg_l11a_1p15: supplied by vreg_s3a_1p3 [ 0.130475] vreg_l12a_1p8: Bringing 0uV into 1800000-1800000uV [ 0.130681] vreg_l12a_1p8: supplied by vreg_s5a_2p15 [ 0.130789] vreg_l13a_2p95: Bringing 0uV into 1800000-1800000uV [ 0.130988] vreg_l14a_1p8: Bringing 0uV into 1800000-1800000uV [ 0.131145] vreg_l14a_1p8: supplied by vreg_s5a_2p15 [ 0.131229] vreg_l15a_1p8: Bringing 0uV into 1800000-1800000uV [ 0.131393] vreg_l15a_1p8: supplied by vreg_s5a_2p15 [ 0.131483] vreg_l16a_2p7: Bringing 0uV into 2700000-2700000uV [ 0.131651] vreg_l16a_2p7: supplied by vph_pwr [ 0.131746] vreg_l17a_2p8: Bringing 0uV into 2500000-2500000uV [ 0.131969] vreg_l18a_2p85: Bringing 0uV into 2700000-2700000uV [ 0.132195] vreg_l19a_2p8: Bringing 0uV into 3000000-3000000uV [ 0.135987] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.136473] vreg_l20a_2p95: Bringing 0uV into 2950000-2950000uV [ 0.136748] vreg_l21a_2p95: Bringing 0uV into 2950000-2950000uV [ 0.137025] vreg_l22a_3p0: Bringing 0uV into 3300000-3300000uV [ 0.137301] vreg_l23a_2p8: Bringing 0uV into 2800000-2800000uV [ 0.137591] vreg_l24a_3p075: Bringing 0uV into 3075000-3075000uV [ 0.137907] vreg_l25a_1p2: Bringing 0uV into 1200000-1200000uV [ 0.138174] vreg_l25a_1p2: supplied by vreg_s3a_1p3 [ 0.138271] vreg_l26a_0p8: Bringing 0uV into 1000000-1000000uV [ 0.138538] vreg_l26a_0p8: supplied by vreg_s3a_1p3 [ 0.138679] vreg_l28a_0p925: Bringing 0uV into 925000-925000uV [ 0.138970] vreg_l28a_0p925: supplied by vreg_s3a_1p3 [ 0.139060] NFS: Registering the id_resolver key type [ 0.139094] vreg_l29a_2p8: Bringing 0uV into 2800000-2800000uV [ 0.139097] Key type id_resolver registered [ 0.139102] Key type id_legacy registered [ 0.139195] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.139205] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.139374] 9p: Installing v9fs 9p2000 file system support [ 0.139580] vreg_l30a_1p8: Bringing 0uV into 1800000-1800000uV [ 0.139915] vreg_l30a_1p8: supplied by vph_pwr [ 0.140044] vreg_l32a_1p8: Bringing 0uV into 1800000-1800000uV [ 0.140345] vreg_l32a_1p8: supplied by vreg_s5a_2p15 [ 0.140723] vreg_lvs1a_1p8: supplied by vreg_s4a_1p8 [ 0.141104] vreg_lvs2a_1p8: supplied by vreg_s4a_1p8 [ 0.141726] vph_pwr_bbyp: Bringing 0uV into 3300000-3300000uV [ 0.142098] vph_pwr_bbyp: supplied by vph_pwr [ 0.142172] vreg_s1b_1p025: Bringing 0uV into 1025000-1025000uV [ 0.142502] vreg_s1b_1p025: supplied by vph_pwr [ 0.196936] Key type asymmetric registered [ 0.196953] Asymmetric key parser 'x509' registered [ 0.197039] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 0.197049] io scheduler mq-deadline registered [ 0.197056] io scheduler kyber registered [ 0.210222] EINJ: ACPI disabled. [ 0.249415] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.254484] SuperH (H)SCI(F) driver initialized [ 0.255742] msm_serial: driver initialized [ 0.273651] loop: module loaded [ 0.275824] megasas: 07.717.02.00-rc1 [ 0.284835] spmi spmi-0: PMIC arbiter version v2 (0x20010000) [ 0.301389] vreg_l1a_1p0: supplied by vreg_s1b_1p025 [ 0.301538] vreg_l9a_1p8: supplied by vph_pwr_bbyp [ 0.301659] vreg_l10a_1p8: supplied by vph_pwr_bbyp [ 0.301772] vreg_l13a_2p95: supplied by vph_pwr_bbyp [ 0.301882] vreg_l17a_2p8: supplied by vph_pwr_bbyp [ 0.301990] vreg_l18a_2p85: supplied by vph_pwr_bbyp [ 0.302102] vreg_l19a_2p8: supplied by vph_pwr_bbyp [ 0.302220] vreg_l20a_2p95: supplied by vph_pwr_bbyp [ 0.302328] vreg_l21a_2p95: supplied by vph_pwr_bbyp [ 0.302432] vreg_l22a_3p0: supplied by vph_pwr_bbyp [ 0.302544] vreg_l23a_2p8: supplied by vph_pwr_bbyp [ 0.302708] vreg_l24a_3p075: supplied by vph_pwr_bbyp [ 0.302831] vreg_l29a_2p8: supplied by vph_pwr_bbyp [ 0.302966] s1: supplied by regulator-dummy [ 0.303370] s2: supplied by regulator-dummy [ 0.303749] s3: supplied by regulator-dummy [ 0.304118] s4: supplied by regulator-dummy [ 0.304487] s5: supplied by regulator-dummy [ 0.305294] s7: supplied by regulator-dummy [ 0.305686] s8: supplied by regulator-dummy [ 0.305933] VDD_APCC: Bringing 905000uV into 980000-980000uV [ 0.306118] VDD_APCC: supplied by vph_pwr [ 0.306879] s12: supplied by regulator-dummy [ 0.307268] l1: supplied by regulator-dummy [ 0.307650] l2: supplied by regulator-dummy [ 0.308055] l3: supplied by regulator-dummy [ 0.308444] l4: supplied by regulator-dummy [ 0.308839] l6: supplied by regulator-dummy [ 0.309229] l7: supplied by regulator-dummy [ 0.309619] l8: supplied by regulator-dummy [ 0.310002] l9: supplied by regulator-dummy [ 0.310420] l10: supplied by regulator-dummy [ 0.310863] l11: supplied by regulator-dummy [ 0.311264] l12: supplied by regulator-dummy [ 0.311683] l13: supplied by regulator-dummy [ 0.312080] l14: supplied by regulator-dummy [ 0.312482] l15: supplied by regulator-dummy [ 0.312900] l16: supplied by regulator-dummy [ 0.313304] l17: supplied by regulator-dummy [ 0.313710] l18: supplied by regulator-dummy [ 0.314122] l19: supplied by regulator-dummy [ 0.314534] l20: supplied by regulator-dummy [ 0.315004] l21: supplied by regulator-dummy [ 0.315425] l22: supplied by regulator-dummy [ 0.315835] l23: supplied by regulator-dummy [ 0.316253] l24: supplied by regulator-dummy [ 0.316667] l25: supplied by regulator-dummy [ 0.317093] l26: supplied by regulator-dummy [ 0.317525] l27: supplied by regulator-dummy [ 0.317951] l28: supplied by regulator-dummy [ 0.318374] l29: supplied by regulator-dummy [ 0.318854] l30: supplied by regulator-dummy [ 0.319296] l31: supplied by regulator-dummy [ 0.319719] l32: supplied by regulator-dummy [ 0.320120] lvs1: supplied by regulator-dummy [ 0.320527] lvs2: supplied by regulator-dummy [ 0.328904] s1: supplied by regulator-dummy [ 0.329177] VDD_GFX: Bringing 1000000uV into 980000-980000uV [ 0.329577] VDD_GFX: supplied by vph_pwr [ 0.330045] l1: supplied by regulator-dummy [ 0.338908] tun: Universal TUN/TAP device driver, 1.6 [ 0.341182] thunder_xcv, ver 1.0 [ 0.341269] thunder_bgx, ver 1.0 [ 0.341332] nicpf, ver 1.0 [ 0.345031] hclge is initializing [ 0.345075] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 0.345089] hns3: Copyright (c) 2017 Huawei Corporation. [ 0.345216] e1000: Intel(R) PRO/1000 Network Driver [ 0.345229] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.345296] e1000e: Intel(R) PRO/1000 Network Driver [ 0.345307] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.345380] igb: Intel(R) Gigabit Ethernet Network Driver [ 0.345393] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.345451] igbvf: Intel(R) Gigabit Virtual Function Network Driver [ 0.345463] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 0.346436] sky2: driver version 1.30 [ 0.349599] VFIO - User Level meta-driver version: 0.3 [ 0.355175] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.355202] ehci-pci: EHCI PCI platform driver [ 0.355290] ehci-platform: EHCI generic platform driver [ 0.355657] ehci-orion: EHCI orion driver [ 0.355980] ehci-exynos: EHCI Exynos driver [ 0.356277] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.356320] ohci-pci: OHCI PCI platform driver [ 0.356401] ohci-platform: OHCI generic platform driver [ 0.356753] ohci-exynos: OHCI Exynos driver [ 0.358243] usbcore: registered new interface driver usb-storage [ 0.366185] i2c_dev: i2c /dev entries driver [ 0.376985] input: pm8941_pwrkey as /devices/platform/soc/400f000.qcom,spmi/spmi-0/0-00/400f000.qcom,spmi:pmic@0:pon@800/400f000.qcom,spmi:pmic@0:pon@800:pwrkey/input/input0 [ 0.380584] input: pm8941_resin as /devices/platform/soc/400f000.qcom,spmi/spmi-0/0-00/400f000.qcom,spmi:pmic@0:pon@800/400f000.qcom,spmi:pmic@0:pon@800:resin/input/input1 [ 0.400672] Bluetooth: HCI UART driver ver 2.3 [ 0.400704] Bluetooth: HCI UART protocol H4 registered [ 0.400746] Bluetooth: HCI UART protocol LL registered [ 0.401014] Bluetooth: HCI UART protocol Broadcom registered [ 0.401054] Bluetooth: HCI UART protocol QCA registered [ 0.407411] sdhci: Secure Digital Host Controller Interface driver [ 0.407435] sdhci: Copyright(c) Pierre Ossman [ 0.409576] Synopsys Designware Multimedia Card Interface Driver [ 0.412827] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.417764] ledtrig-cpu: registered to indicate activity on CPUs [ 0.423385] usbcore: registered new interface driver usbhid [ 0.423411] usbhid: USB HID core driver [ 0.428270] qcom_q6v5_pas 9300000.remoteproc: supply cx not found, using dummy regulator [ 0.428618] qcom_q6v5_pas 9300000.remoteproc: supply px not found, using dummy regulator [ 0.429926] remoteproc remoteproc0: 9300000.remoteproc is available [ 0.430940] remoteproc remoteproc0: Direct firmware load for qcom/apq8096/adsp.mbn failed with error -2 [ 0.430975] remoteproc remoteproc0: powering up 9300000.remoteproc [ 0.431067] remoteproc remoteproc0: Direct firmware load for qcom/apq8096/adsp.mbn failed with error -2 [ 0.431091] remoteproc remoteproc0: request_firmware failed: -2 [ 0.456999] NET: Registered PF_PACKET protocol family [ 0.457256] 9pnet: Installing 9P2000 support [ 0.457365] Key type dns_resolver registered [ 0.458038] Loading compiled-in X.509 certificates [ 0.533179] qcom-qmp-phy 34000.phy: Registered Qcom-QMP phy [ 0.534869] qcom-qmp-phy 627000.phy: Registered Qcom-QMP phy [ 0.537060] qcom-qmp-phy 7410000.phy: Registered Qcom-QMP phy [ 0.538561] qcom-qusb2-phy 7411000.phy: Registered Qcom-QUSB2 phy [ 0.540106] qcom-qusb2-phy 7412000.phy: Registered Qcom-QUSB2 phy [ 0.587413] bam-dma-engine 7544000.dma: num-channels unspecified in dt [ 0.587446] bam-dma-engine 7544000.dma: num-ees unspecified in dt [ 0.590843] bam-dma-engine 7584000.dma: num-channels unspecified in dt [ 0.590874] bam-dma-engine 7584000.dma: num-ees unspecified in dt [ 0.594722] msm_serial 7570000.serial: msm_serial: detected port #2 [ 0.594787] msm_serial 7570000.serial: uartclk = 19200000 [ 0.594872] 7570000.serial: ttyMSM2 at MMIO 0x7570000 (irq = 64, base_baud = 1200000) is a MSM [ 0.595192] serial serial0: tty port ttyMSM2 registered [ 0.597138] msm_serial 75b0000.serial: msm_serial: detected port #0 [ 0.597202] msm_serial 75b0000.serial: uartclk = 7372800 [ 0.597280] 75b0000.serial: ttyMSM0 at MMIO 0x75b0000 (irq = 68, base_baud = 460800) is a MSM [ 0.597324] msm_serial: console setup on port #0 [ 0.597474] Bluetooth: hci0: setting up ROME/QCA6390 [ 0.602533] printk: console [ttyMSM0] enabled [ 2.647511] Bluetooth: hci0: QCA Product ID :0x00000008 [ 2.651201] Bluetooth: hci0: QCA SOC Version :0x00000044 [ 2.653249] arm-smmu b40000.iommu: probing hardware configuration... [ 2.656566] Bluetooth: hci0: QCA ROM Version :0x00000302 [ 2.656577] Bluetooth: hci0: QCA Patch Version:0x00000111 [ 2.656593] Bluetooth: hci0: QCA controller version 0x00440302 [ 2.661922] arm-smmu b40000.iommu: SMMUv2 with: [ 2.668362] Bluetooth: hci0: QCA Downloading qca/rampatch_00440302.bin [ 2.673684] arm-smmu b40000.iommu: stage 1 translation [ 2.679167] bluetooth hci0: Direct firmware load for qca/rampatch_00440302.bin failed with error -2 [ 2.684751] arm-smmu b40000.iommu: address translation ops [ 2.684760] arm-smmu b40000.iommu: non-coherent table walk [ 2.684769] arm-smmu b40000.iommu: (IDR0.CTTW overridden by FW configuration) [ 2.684819] arm-smmu b40000.iommu: stream matching with 2 register groups [ 2.689211] Bluetooth: hci0: QCA Failed to request file: qca/rampatch_00440302.bin (-2) [ 2.695837] arm-smmu b40000.iommu: 2 context banks (0 stage-2 only) [ 2.700945] Bluetooth: hci0: QCA Failed to download patch (-2) [ 2.709987] arm-smmu b40000.iommu: Supported page sizes: 0x63315000 [ 2.755346] arm-smmu b40000.iommu: Stage-1: 48-bit VA -> 36-bit IPA [ 2.765252] arm-smmu d00000.iommu: probing hardware configuration... [ 2.768218] arm-smmu d00000.iommu: SMMUv2 with: [ 2.774545] arm-smmu d00000.iommu: stage 1 translation [ 2.778868] arm-smmu d00000.iommu: address translation ops [ 2.784030] arm-smmu d00000.iommu: non-coherent table walk [ 2.789594] arm-smmu d00000.iommu: (IDR0.CTTW overridden by FW configuration) [ 2.795136] arm-smmu d00000.iommu: stream matching with 2 register groups [ 2.802472] arm-smmu d00000.iommu: 2 context banks (0 stage-2 only) [ 2.809317] arm-smmu d00000.iommu: Supported page sizes: 0x63315000 [ 2.815809] arm-smmu d00000.iommu: Stage-1: 32-bit VA -> 36-bit IPA [ 2.825255] arm-smmu d40000.iommu: probing hardware configuration... [ 2.828479] arm-smmu d40000.iommu: SMMUv2 with: [ 2.834871] arm-smmu d40000.iommu: stage 1 translation [ 2.839055] arm-smmu d40000.iommu: address translation ops [ 2.844277] arm-smmu d40000.iommu: non-coherent table walk [ 2.849815] arm-smmu d40000.iommu: (IDR0.CTTW overridden by FW configuration) [ 2.855389] arm-smmu d40000.iommu: stream matching with 42 register groups [ 2.862704] arm-smmu d40000.iommu: 7 context banks (0 stage-2 only) [ 2.869593] arm-smmu d40000.iommu: Supported page sizes: 0x63315000 [ 2.876121] arm-smmu d40000.iommu: Stage-1: 32-bit VA -> 36-bit IPA [ 2.892947] arm-smmu da0000.iommu: probing hardware configuration... [ 2.892993] arm-smmu da0000.iommu: SMMUv2 with: [ 2.898497] arm-smmu da0000.iommu: stage 1 translation [ 2.902717] arm-smmu da0000.iommu: address translation ops [ 2.907904] arm-smmu da0000.iommu: non-coherent table walk [ 2.913472] arm-smmu da0000.iommu: (IDR0.CTTW overridden by FW configuration) [ 2.919017] arm-smmu da0000.iommu: stream matching with 4 register groups [ 2.926358] arm-smmu da0000.iommu: 2 context banks (0 stage-2 only) [ 2.933206] arm-smmu da0000.iommu: Supported page sizes: 0x63315000 [ 2.939693] arm-smmu da0000.iommu: Stage-1: 32-bit VA -> 36-bit IPA [ 2.949081] arm-smmu 1600000.iommu: probing hardware configuration... [ 2.952337] arm-smmu 1600000.iommu: SMMUv2 with: [ 2.958679] arm-smmu 1600000.iommu: stage 1 translation [ 2.963327] arm-smmu 1600000.iommu: address translation ops [ 2.968622] arm-smmu 1600000.iommu: non-coherent table walk [ 2.974263] arm-smmu 1600000.iommu: (IDR0.CTTW overridden by FW configuration) [ 2.979920] arm-smmu 1600000.iommu: stream matching with 15 register groups [ 2.986969] arm-smmu 1600000.iommu: 12 context banks (0 stage-2 only) [ 2.994273] arm-smmu 1600000.iommu: Supported page sizes: 0x63315000 [ 3.000569] arm-smmu 1600000.iommu: Stage-1: 36-bit VA -> 36-bit IPA [ 3.014004] adreno b00000.gpu: Adding to iommu group 0 [ 3.028801] ufshcd-qcom 624000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled [ 3.031289] ufshcd-qcom 624000.ufshc: Failed to get reset control -2 [ 3.040031] scsi host0: ufshcd [ 3.045468] ufshcd-qcom 624000.ufshc: ufs_qcom_host_reset: reset control not set [ 3.056350] spi_qup 7575000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64 [ 3.060151] spi_qup 75ba000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64 [ 3.071657] dwc3-qcom 6af8800.usb: IRQ dp_hs_phy_irq not found [ 3.071707] dwc3-qcom 6af8800.usb: IRQ dm_hs_phy_irq not found [ 3.086857] dwc3-qcom 76f8800.usb: IRQ hs_phy_irq not found [ 3.086908] dwc3-qcom 76f8800.usb: IRQ dp_hs_phy_irq not found [ 3.091309] dwc3-qcom 76f8800.usb: IRQ dm_hs_phy_irq not found [ 3.097195] dwc3-qcom 76f8800.usb: IRQ ss_phy_irq not found [ 3.111565] i2c_qup 7577000.i2c: using default clock-frequency 100000 [ 3.115200] i2c_qup 75b5000.i2c: using default clock-frequency 100000 [ 3.137538] qcom-venus c00000.video-codec: Adding to iommu group 1 [ 3.153080] qcom-venus c00000.video-codec: Direct firmware load for qcom/venus-4.2/venus.mdt failed with error -2 [ 3.153139] qcom-venus c00000.video-codec: fail to load video firmware [ 3.164124] ufshcd_get_max_icc_level: Couldn't find valid icc_level = 0 [ 3.164747] scsi 0:0:0:49488: Well-known LUN TOSHIBA THGBF7G8K4LBATRB 0300 PQ: 0 ANSI: 6 [ 3.164893] qcom-venus: probe of c00000.video-codec failed with error -22 [ 3.171004] scsi 0:0:0:49476: Well-known LUN TOSHIBA THGBF7G8K4LBATRB 0300 PQ: 0 ANSI: 6 [ 3.194603] scsi 0:0:0:49456: Well-known LUN TOSHIBA THGBF7G8K4LBATRB 0300 PQ: 0 ANSI: 6 [ 3.200525] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 3.206863] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 614400 KHz, changing to: 652800 KHz [ 3.207640] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 3.224534] sdhci_msm 74a4900.sdhci: Got CD GPIO [ 3.226526] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f665 hci version 0x100 quirks 0x0000000002010010 [ 3.236262] xhci-hcd xhci-hcd.0.auto: irq 96, io mem 0x06a00000 [ 3.241499] qcom-pcie 600000.pcie: host bridge /soc/agnoc@0/pcie@600000 ranges: [ 3.247390] hub 1-0:1.0: USB hub found [ 3.251297] qcom-pcie 600000.pcie: IO 0x000c200000..0x000c2fffff -> 0x000c200000 [ 3.258469] hub 1-0:1.0: 1 port detected [ 3.264388] qcom-pcie 600000.pcie: MEM 0x000c300000..0x000cffffff -> 0x000c300000 [ 3.271005] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 3.281968] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 3.282549] scsi 0:0:0:0: Direct-Access TOSHIBA THGBF7G8K4LBATRB 0300 PQ: 0 ANSI: 6 [ 3.287383] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed [ 3.303437] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.311388] hub 2-0:1.0: USB hub found [ 3.317922] hub 2-0:1.0: 1 port detected [ 3.322069] scsi 0:0:0:1: Direct-Access TOSHIBA THGBF7G8K4LBATRB 0300 PQ: 0 ANSI: 6 [ 3.326289] genirq: irq_chip msmgpio did not update eff. affinity mask of irq 98 [ 3.327050] sd 0:0:0:0: [sda] 6335488 4096-byte logical blocks: (26.0 GB/24.2 GiB) [ 3.341503] sd 0:0:0:0: [sda] Write Protect is off [ 3.342735] mmc0: SDHCI controller on 74a4900.sdhci [74a4900.sdhci] using ADMA 64-bit [ 3.348846] sd 0:0:0:0: [sda] Mode Sense: 00 32 00 10 [ 3.361597] scsi 0:0:0:2: Direct-Access TOSHIBA THGBF7G8K4LBATRB 0300 PQ: 0 ANSI: 6 [ 3.361751] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 3.374420] sd 0:0:0:0: [sda] Optimal transfer size 65536 bytes [ 3.383967] sd 0:0:0:1: [sdb] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB) [ 3.388568] sd 0:0:0:1: [sdb] Write Protect is off [ 3.392683] sda: sda1 [ 3.396176] sd 0:0:0:1: [sdb] Mode Sense: 00 32 00 10 [ 3.401487] scsi 0:0:0:3: Direct-Access TOSHIBA THGBF7G8K4LBATRB 0300 PQ: 0 ANSI: 6 [ 3.408692] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 3.412957] sd 0:0:0:2: [sdc] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB) [ 3.416502] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.424446] sd 0:0:0:1: [sdb] Optimal transfer size 65536 bytes [ 3.436642] sd 0:0:0:2: [sdc] Write Protect is off [ 3.442149] sd 0:0:0:2: [sdc] Mode Sense: 00 32 00 10 [ 3.442401] scsi 0:0:0:4: Direct-Access TOSHIBA THGBF7G8K4LBATRB 0300 PQ: 0 ANSI: 6 [ 3.447829] sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 3.452178] sd 0:0:0:3: [sdd] 32768 4096-byte logical blocks: (134 MB/128 MiB) [ 3.460634] sd 0:0:0:2: [sdc] Optimal transfer size 65536 bytes [ 3.470565] qcom-pcie 600000.pcie: iATU unroll: disabled [ 3.475898] sd 0:0:0:3: [sdd] Write Protect is off [ 3.481777] qcom-pcie 600000.pcie: Detected iATU regions: 32 outbound, 8 inbound [ 3.488634] sd 0:0:0:3: [sdd] Mode Sense: 00 32 00 10 [ 3.502612] scsi 0:0:0:5: Direct-Access TOSHIBA THGBF7G8K4LBATRB 0300 PQ: 0 ANSI: 6 [ 3.504723] sd 0:0:0:3: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 3.507262] sdb: sdb1 [ 3.521179] sd 0:0:0:3: [sdd] Optimal transfer size 65536 bytes [ 3.522375] sd 0:0:0:4: [sde] 1048576 4096-byte logical blocks: (4.29 GB/4.00 GiB) [ 3.532720] sd 0:0:0:5: [sdf] 393216 4096-byte logical blocks: (1.61 GB/1.50 GiB) [ 3.534599] sd 0:0:0:4: [sde] Write Protect is off [ 3.538737] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 3.544452] sd 0:0:0:4: [sde] Mode Sense: 00 32 00 10 [ 3.548751] sd 0:0:0:5: [sdf] Write Protect is off [ 3.548778] sd 0:0:0:5: [sdf] Mode Sense: 00 32 00 10 [ 3.557255] sdc: sdc1 [ 3.560662] sd 0:0:0:1: [sdb] Attached SCSI disk [ 3.565490] sd 0:0:0:4: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 3.572463] sd 0:0:0:5: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 3.578429] sd 0:0:0:4: [sde] Optimal transfer size 65536 bytes [ 3.590708] qcom-pcie 600000.pcie: Link up [ 3.596053] sdd: sdd1 sdd2 sdd3 [ 3.599863] sd 0:0:0:5: [sdf] Optimal transfer size 65536 bytes [ 3.604510] sd 0:0:0:2: [sdc] Attached SCSI disk [ 3.607821] qcom-pcie 600000.pcie: PCI host bridge to bus 0000:00 [ 3.617871] pci_bus 0000:00: root bus resource [bus 00-ff] [ 3.622250] sd 0:0:0:3: [sdd] Attached SCSI disk [ 3.623859] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xc200000-0xc2fffff]) [ 3.623886] pci_bus 0000:00: root bus resource [mem 0x0c300000-0x0cffffff] [ 3.623982] pci 0000:00:00.0: [17cb:0104] type 01 class 0x060400 [ 3.629732] sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27 sde28 sde29 sde30 [ 3.634016] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff] [ 3.649756] sdf: sdf1 sdf2 sdf3 sdf4 sdf5 sdf6 sdf7 sdf8 sdf9 [ 3.650421] pci 0000:00:00.0: PME# supported from D0 D3hot [ 3.669116] sd 0:0:0:5: [sdf] Attached SCSI disk [ 3.683409] pci 0000:01:00.0: [168c:003e] type 00 class 0x028000 [ 3.690562] sd 0:0:0:4: [sde] Attached SCSI disk [ 3.695297] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit] [ 3.707011] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 3.732746] pci 0000:00:00.0: BAR 14: assigned [mem 0x0c400000-0x0c5fffff] [ 3.732836] pci 0000:00:00.0: BAR 0: assigned [mem 0x0c300000-0x0c300fff] [ 3.738839] pci 0000:01:00.0: BAR 0: assigned [mem 0x0c400000-0x0c5fffff 64bit] [ 3.746309] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 3.752653] pci 0000:00:00.0: bridge window [mem 0x0c400000-0x0c5fffff] [ 3.764793] pcieport 0000:00:00.0: PME: Signaling with IRQ 100 [ 3.769319] ath10k_pci 0000:01:00.0: enabling device (0000 -> 0002) [ 3.771418] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 3.816333] hub 1-1:1.0: USB hub found [ 3.816896] hub 1-1:1.0: 4 ports detected [ 3.871038] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 3.912780] qcom-pcie 608000.pcie: supply vddpe-3v3 not found, using dummy regulator [ 3.913494] qcom-pcie 608000.pcie: host bridge /soc/agnoc@0/pcie@608000 ranges: [ 3.919791] qcom-pcie 608000.pcie: IO 0x000d200000..0x000d2fffff -> 0x000d200000 [ 3.926740] qcom-pcie 608000.pcie: MEM 0x000d300000..0x000dffffff -> 0x000d300000 [ 3.935706] hub 2-1:1.0: USB hub found [ 3.943145] hub 2-1:1.0: 4 ports detected [ 4.043370] ath10k_pci 0000:01:00.0: Failed to find firmware-N.bin (N between 2 and 6) from ath10k/QCA6174/hw3.0: -2 [ 4.043453] ath10k_pci 0000:01:00.0: could not fetch firmware files (-2) [ 4.044561] qcom-pcie 608000.pcie: iATU unroll: disabled [ 4.053149] ath10k_pci 0000:01:00.0: could not probe fw (-2) [ 4.059879] qcom-pcie 608000.pcie: Detected iATU regions: 32 outbound, 8 inbound [ 4.202810] usb 1-1.1: new low-speed USB device number 3 using xhci-hcd [ 4.460896] input: Liteon Technology Corp. USB wired keyboard as /devices/platform/soc/6af8800.usb/6a00000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.0/0003:04CA:007D.0001/input/input2 [ 4.520100] hid-generic 0003:04CA:007D.0001: input: USB HID v1.11 Keyboard [Liteon Technology Corp. USB wired keyboard] on usb-xhci-hcd.0.auto-1.1/input0 [ 4.525440] input: Liteon Technology Corp. USB wired keyboard Consumer Control as /devices/platform/soc/6af8800.usb/6a00000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:04CA:007D.0002/input/input3 [ 4.591521] input: Liteon Technology Corp. USB wired keyboard System Control as /devices/platform/soc/6af8800.usb/6a00000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:04CA:007D.0002/input/input4 [ 4.591905] hid-generic 0003:04CA:007D.0002: input: USB HID v1.11 Device [Liteon Technology Corp. USB wired keyboard] on usb-xhci-hcd.0.auto-1.1/input1 [ 5.067251] qcom-pcie 608000.pcie: Phy link never came up [ 5.067716] qcom-pcie 608000.pcie: PCI host bridge to bus 0001:00 [ 5.071775] pci_bus 0001:00: root bus resource [bus 00-ff] [ 5.077865] pci_bus 0001:00: root bus resource [io 0x100000-0x1fffff] (bus address [0xd200000-0xd2fffff]) [ 5.083162] pci_bus 0001:00: root bus resource [mem 0x0d300000-0x0dffffff] [ 5.092855] pci 0001:00:00.0: [17cb:0104] type 01 class 0x060400 [ 5.099673] pci 0001:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff] [ 5.105968] pci 0001:00:00.0: PME# supported from D0 D3hot [ 5.130898] pci 0001:00:00.0: BAR 0: assigned [mem 0x0d300000-0x0d300fff] [ 5.130986] pci 0001:00:00.0: PCI bridge to [bus 01-ff] [ 5.142782] pcieport 0001:00:00.0: PME: Signaling with IRQ 103 [ 5.146761] qcom-pcie 610000.pcie: supply vddpe-3v3 not found, using dummy regulator [ 5.148260] qcom-pcie 610000.pcie: host bridge /soc/agnoc@0/pcie@610000 ranges: [ 5.155693] qcom-pcie 610000.pcie: IO 0x000e200000..0x000e2fffff -> 0x000e200000 [ 5.162717] qcom-pcie 610000.pcie: MEM 0x000e300000..0x000fffffff -> 0x000e300000 [ 5.280504] qcom-pcie 610000.pcie: iATU unroll: disabled [ 5.280569] qcom-pcie 610000.pcie: Detected iATU regions: 32 outbound, 8 inbound [ 5.385206] qcom-pcie 610000.pcie: Link up [ 5.385638] qcom-pcie 610000.pcie: PCI host bridge to bus 0002:00 [ 5.388305] pci_bus 0002:00: root bus resource [bus 00-ff] [ 5.394422] pci_bus 0002:00: root bus resource [io 0x200000-0x2fffff] (bus address [0xe200000-0xe2fffff]) [ 5.399799] pci_bus 0002:00: root bus resource [mem 0x0e300000-0x0fffffff] [ 5.409498] pci 0002:00:00.0: [17cb:0104] type 01 class 0x060400 [ 5.416315] pci 0002:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff] [ 5.422612] pci 0002:00:00.0: PME# supported from D0 D3hot [ 5.438819] pci 0002:01:00.0: [1969:1083] type 00 class 0x020000 [ 5.439077] pci 0002:01:00.0: reg 0x10: [mem 0x00000000-0x0003ffff 64bit] [ 5.444029] pci 0002:01:00.0: reg 0x18: [io 0x0000-0x007f] [ 5.451032] pci 0002:01:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format) [ 5.456552] pci 0002:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 5.488244] pci 0002:00:00.0: BAR 14: assigned [mem 0x0e300000-0x0e3fffff] [ 5.488328] pci 0002:00:00.0: BAR 0: assigned [mem 0x0e400000-0x0e400fff] [ 5.494131] pci 0002:00:00.0: BAR 13: assigned [io 0x200000-0x200fff] [ 5.500968] pci 0002:01:00.0: BAR 0: assigned [mem 0x0e300000-0x0e33ffff 64bit] [ 5.507513] pci 0002:01:00.0: BAR 2: assigned [io 0x200000-0x20007f] [ 5.514612] pci 0002:00:00.0: PCI bridge to [bus 01-ff] [ 5.521177] pci 0002:00:00.0: bridge window [io 0x200000-0x200fff] [ 5.526212] pci 0002:00:00.0: bridge window [mem 0x0e300000-0x0e3fffff] [ 5.538891] pcieport 0002:00:00.0: PME: Signaling with IRQ 105 [ 5.540303] atl1c 0002:01:00.0: enabling device (0000 -> 0002) [ 5.612205] msm_mdp 901000.mdp: Adding to iommu group 2 [ 5.613466] msm_mdp 901000.mdp: No interconnect support may cause display underflows! [ 5.619999] msm 900000.mdss: supply vdd not found, using dummy regulator [ 5.625466] msm_mdp 901000.mdp: [drm:mdp5_bind] MDP5 version v1.7 [ 5.631212] msm 900000.mdss: bound 901000.mdp (ops mdp5_ops) [ 5.641406] msm 900000.mdss: bound 9a0000.hdmi-tx (ops msm_hdmi_ops) [ 5.645964] adreno b00000.gpu: supply vdd not found, using dummy regulator [ 5.649719] adreno b00000.gpu: supply vddcx not found, using dummy regulator [ 5.656294] adreno b00000.gpu: [drm:msm_devfreq_init] *ERROR* Couldn't register GPU cooling device [ 5.669334] msm 900000.mdss: bound b00000.gpu (ops a3xx_ops) [ 5.692166] ------------[ cut here ]------------ [ 5.692219] Hot plug detection already enabled [ 5.695975] WARNING: CPU: 1 PID: 8 at drivers/gpu/drm/drm_bridge.c:1147 drm_bridge_hpd_enable+0x90/0xa0 [ 5.700130] Modules linked in: [ 5.709412] CPU: 1 PID: 8 Comm: kworker/u8:0 Not tainted 5.15.54-00037-gfbffff077804 #1206 [ 5.712539] Hardware name: Qualcomm Technologies, Inc. DB820c (DT) [ 5.720786] Workqueue: events_unbound deferred_probe_work_func [ 5.726949] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 5.732764] pc : drm_bridge_hpd_enable+0x90/0xa0 [ 5.739616] lr : drm_bridge_hpd_enable+0x90/0xa0 [ 5.744480] sp : ffff800008073850 [ 5.749077] x29: ffff800008073850 x28: ffff0000820ed800 x27: 0000000000000002 [ 5.752295] x26: ffff0000820ed800 x25: ffff0000820ec800 x24: ffff800008073998 [ 5.759412] x23: ffff000080e21c10 x22: ffff000080396d40 x21: ffff8000088706c0 [ 5.766530] x20: ffff0000820ee800 x19: ffff000080396c80 x18: ffffffffffffffff [ 5.773648] x17: 000000001de2f288 x16: 00000000907b4656 x15: ffff800088073567 [ 5.780766] x14: 0000000000000000 x13: ffff80000a2a3070 x12: 0000000000000732 [ 5.787885] x11: 0000000000000266 x10: ffff80000a2a3070 x9 : ffff80000a2a3070 [ 5.795004] x8 : 00000000ffffefff x7 : ffff80000a2fb070 x6 : ffff80000a2fb070 [ 5.802121] x5 : 000000000000bff4 x4 : 0000000000000000 x3 : 0000000000000000 [ 5.809239] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff00008009e200 [ 5.816360] Call trace: [ 5.823472] drm_bridge_hpd_enable+0x90/0xa0 [ 5.825728] drm_bridge_connector_enable_hpd+0x28/0x40 [ 5.830242] msm_hdmi_modeset_init+0xc8/0x230 [ 5.835189] modeset_init+0x16c/0x520 [ 5.839616] mdp5_kms_init+0x204/0x400 [ 5.843263] msm_drm_bind+0x50c/0x6c0 [ 5.846907] try_to_bring_up_master+0x164/0x1d0 [ 5.850641] __component_add+0xa0/0x170 [ 5.854981] component_add+0x18/0x24 [ 5.858800] msm_hdmi_dev_probe+0x20/0x2c [ 5.862619] platform_probe+0x6c/0xe0 [ 5.866525] really_probe.part.0+0x9c/0x310 [ 5.870173] __driver_probe_device+0x98/0x144 [ 5.874166] driver_probe_device+0xc8/0x15c [ 5.878679] __device_attach_driver+0xb8/0x120 [ 5.882672] bus_for_each_drv+0x78/0xd0 [ 5.887186] __device_attach+0xa8/0x1c0 [ 5.890919] device_initial_probe+0x18/0x24 [ 5.894738] bus_probe_device+0xa0/0xac [ 5.898905] deferred_probe_work_func+0x88/0xc0 [ 5.902726] process_one_work+0x1d0/0x354 [ 5.907238] worker_thread+0x2c0/0x470 [ 5.911405] kthread+0x154/0x160 [ 5.915050] ret_from_fork+0x10/0x20 [ 5.918438] ---[ end trace 979d62b1f7d55b90 ]--- [ 6.055722] [drm] Initialized msm 1.8.0 20130625 for 900000.mdss on minor 0 [ 6.056939] msm 900000.mdss: Direct firmware load for qcom/a530_pm4.fw failed with error -2 [ 6.061618] msm 900000.mdss: [drm:adreno_request_fw] *ERROR* failed to load a530_pm4.fw [ 6.070159] msm 900000.mdss: [drm] Cannot find any crtc or sizes [ 6.093125] input: gpio_keys as /devices/platform/gpio_keys/input/input5 [ 6.096228] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 6.104407] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 6.107004] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 6.112205] ALSA device list: [ 6.113091] cfg80211: failed to load regulator��[ 6.138842] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 6.138906] EXT4-fs (sda1): write access will be enabled during recovery [ 6.209325] EXT4-fs (sda1): recovery complete [ 6.211003] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 6.212825] VFS: Mounted root (ext4 filesystem) readonly on device 8:1. [ 6.224689] devtmpfs: mounted [ 6.232832] Freeing unused kernel memory: 6784K [ 6.233685] Run /sbin/init as init process [ 6.236254] with arguments: [ 6.240389] /sbin/init [ 6.243423] with environment: [ 6.246000] HOME=/ [ 6.249067] TERM=linux [ 6.524813] systemd[1]: System time before build time, advancing clock. Welcome to Debian GNU/Linux 10 (buster)! Failed to bump fs.file-max, ignoring: Invalid argument [ 7.102947] msm 900000.mdss: [drm] Cannot find any crtc or sizes File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) Configuration file /lib/systemd/system/qrtr-ns.service is marked executable. Please remove executable permission bits. Proceeding anyway. Binding to IPv6 address not available since kernel does not support IPv6. [ 7.733572] random: systemd: uninitialized urandom read (16 bytes read) [ 7.746721] random: systemd: uninitialized urandom read (16 bytes read) [ OK ] Created slice User and Session Slic[ 7.754048] random: systemd: uninitialized urandom read (16 bytes read) e. [ OK ] Reached target Slices. [ OK ] Created slice system-serial\x2dgetty.slice. [ OK ] Reached target Swap. [ OK ] Listening on fsck to fsckd communication Socket. [ OK ] Reached target Remote File Systems. [ OK ] Created slice system-getty.slice. [ OK ] Listening on Syslog Socket. [ OK ] Listening on initctl Compatibility Named Pipe. [ OK ] Listening on udev Kernel Socket. [ OK ] Started Dispatch Password ���ts to Console Directory Watch. [ OK ] Listening on Journal Socket. Mounting POSIX Message Queue File System... Starting Load Kernel Modules... Starting File System Check on Root Device... Starting Set the console keyboard layout... Mounting Kernel Debug File System... Mounting Huge Pages File System... [ OK ] Listening on Journal Audit Socket. [ OK ] Listening on Journal Socket (/dev/log). Starting Journal Service... [ OK ] Listening on udev Control Socket. Starting udev Coldplug all Devices... [ OK ] Started Forward Password R���uests to Wall Directory Watch. [ OK ] Reached target Paths. [ OK ] Reached target Local Encrypted Volumes. Starting Nameserver information manager... [ OK ] Mounted POSIX Message Queue File System. [ OK ] Started Load Kernel Modules. [ OK ] Mounted Kernel Debug File System. [ OK ] Mounted Huge Pages File System. [ OK ] Started File System Check on Root Device. [ OK ] Started Nameserver information manager. [ OK ] Started File System Check Daemon to report status. Starting Remount Root and Kernel File Systems... Starting Apply Kernel Variables... Mounting Kernel Configuration File System... [ OK ] Mounted Kernel Configuration File System. [ OK ] Started Apply Kernel Variables. [ 9.906852] EXT4-fs (sda1): re-mounted. Opts: data=ordered. Quota mode: none. [ OK ] Started Remount Root and Kernel File Systems. [ 9.957935] random: systemd: uninitialized urandom read (16 bytes read) Starting Load/Save Random Seed... [ 9.981305] random: systemd: uninitialized urandom read (16 bytes read) Starting Create System Users... [ 10.163824] random: systemd-random-: uninitialized urandom read (512 bytes read) [ OK ] Started Load/Save Random Seed. [ OK ] Started Create System Users. [ OK ] Started Journal Service. Starting Flush Journal to Persistent Storage... Starting Create Static Device Nodes in /dev... [ OK ] Started Set the console keyboard layout. [ 10.541050] systemd-journald[202]: Received request to flush runtime journal from PID 1 [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). [ OK ] Reached target Local File Systems. Starting Create Volatile Files and Directories... Starting Set console font and keymap... Starting udev Kernel Device Manager... [ OK ] Started Set console font and keymap. [ OK ] Started Create Volatile Files and Directories. [ 10.981693] random: systemd: uninitialized urandom read (16 bytes read) Starting Network Time Synchronization... [ 11.020351] random: systemd: uninitialized urandom read (16 bytes read) [ 11.040685] random: systemd-journal: uninitialized urandom read (16 bytes read) Starting Update UTMP about System Boot/Shutdown... [ OK ] Started udev Kernel Device Manager. [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Time Synchronized. [ OK ] Started udev Coldplug all Devices. [ 13.700808] random: systemd: uninitialized urandom read (16 bytes read) [ OK ] Reached target System Initialization. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on GPS (Global P���ioning System) Daemon Sockets. [ OK ] Reached target Sockets. [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Reached target Basic System. Starting Initialize hardware monitoring sensors... Starting Disk Manager... [ OK ] Started Regular background program processing daemon. Starting System Logging Service... [ OK ] Started D-Bus System Message Bus. Starting Network Manager... Starting LSB: Load kernel ���d to enable cpufreq scaling... Starting WPA supplicant... Starting Modem Manager... [ OK ] Started Trigger anacron every hour. [ OK ] Started Run anacron jobs. Starting Restore /etc/reso��� the ppp link was shut down... [ OK ] Started QIPCRTR Name Service. [ OK ] Started Qualcomm remotefs service. [ OK ] Started Daily rotation of log files. Starting Login Service... [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. Starting Helper to synchronize boot up for ifupdown... [ OK ] Started System Logging Service. [ OK ] Started Restore /etc/resol���re the ppp link was shut down. [ OK ] Started Helper to synchronize boot up for ifupdown. [ OK ] Started Initialize hardware monitoring sensors. Starting Hostname Service... Starting Authorization Manager... Stopping Qualcomm remotefs service... Starting Raise network interfaces... [ OK ] Started Network Manager. [ OK ] Started WPA supplicant. [ OK ] Started Login Service. [ OK ] Started Authorization Manager. [ OK ] Started LSB: Load kernel m���ded to enable cpufreq scaling. Starting LSB: set CPUFreq kernel parameters... [ OK ] Started Modem Manager. [ OK ] Started Hostname Service. [ OK ] Started LSB: set CPUFreq kernel parameters. Starting Network Manager Script Dispatcher Service... [ OK ] Started Raise network interfaces. [ OK ] Reached target Network. Starting Permit User Sessions... Starting /etc/rc.local Compatibility... Starting OpenBSD Secure Shell server... [ OK ] Started Permit User Sessions. [ OK ] Started /etc/rc.local Compatibility. [ OK ] Started Network Manager Script Dispatcher Service. [ OK ] Started Disk Manager. [ OK ] Started Getty on tty1. Starting Simple Desktop Display Manager... [ OK ] Started Simple Desktop Display Manager. [ 20.563100] random: crng init done [ 20.563132] random: 154 urandom warning(s) missed due to ratelimiting [ OK ] Started OpenBSD Secure Shell server. [ 21.465948] msm 900000.mdss: [drm:adreno_request_fw] loaded qcom/a530_pm4.fw from legacy location [ 21.466521] msm 900000.mdss: [drm:adreno_request_fw] loaded qcom/a530_pfp.fw from legacy location [ 21.480892] msm 900000.mdss: [drm:adreno_request_fw] loaded qcom/a530v3_gpmu.fw2 from legacy location [ 21.486775] msm 900000.mdss: [drm:adreno_request_fw] loaded qcom/a530_zap.mdt from legacy location [ 21.892730] atl1c 0002:01:00.0 enP2p1s0: renamed from eth0 [ 22.257194] broken atomic modeset userspace detected, disabling atomic [ 22.439910] atl1c 0002:01:00.0: atl1c: enP2p1s0 NIC Link is Up<1000 Mbps Full Duplex> [ OK ] Found device /dev/ttyMSM0. [ OK ] Listening on Load/Save RF ���itch Status /dev/rfkill Watch. Starting Bluetooth service... [ OK ] Started Serial Getty on ttyMSM0. [ OK ] Reached target Login Prompts. [ OK ] Created slice User Slice of UID 1000. Starting User Runtime Directory /run/user/1000... [ 24.192197] Bluetooth: hci0: setting up ROME/QCA6390 [ OK ] Started User Runtime Directory /run/user/1000. [ OK ] Started Bluetooth service. [ OK ] Reached target Bluetooth. Starting User Manager for UID 1000... Starting Load/Save RF Kill Switch Status... [ OK ] Started Load/Save RF Kill Switch Status. [ OK ] Started User Manager for UID 1000. [ OK ] Started Session 1 of user linaro. [ 24.674861] Bluetooth: hci0: QCA Product ID :0x00000008 [ 24.674895] Bluetooth: hci0: QCA SOC Version :0x00000044 [ 24.679444] Bluetooth: hci0: QCA ROM Version :0x00000302 [ 24.684694] Bluetooth: hci0: QCA Patch Version:0x00000111 [ 24.690122] Bluetooth: hci0: QCA controller version 0x00440302 [ 24.695465] Bluetooth: hci0: QCA Downloading qca/rampatch_00440302.bin [ 24.703376] bluetooth hci0: Direct firmware load for qca/rampatch_00440302.bin failed with error -2 [ 24.707839] Bluetooth: hci0: QCA Failed to request file: qca/rampatch_00440302.bin (-2) [ 24.716855] Bluetooth: hci0: QCA Failed to download patch (-2) Debian GNU/Linux 10 linaro-alip ttyMSM0 linaro-alip login: root (automatic login) Last login: Tue Jul 19 14:50:45 UTC 2022 on ttyMSM0 Linux linaro-alip 5.15.54-00037-gfbffff077804 #1206 SMP PREEMPT Tue Jul 19 12:02:38 MSK 2022 aarch64 The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. root@linaro-alip:~# root@linaro-alip:~# root@linaro-alip:~# root@linaro-alip:~# root@linaro-alip:~# Format: Log Type - Time(microsec) - Message - Optional Info Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic S - QC_IMAGE_VERSION_STRING=BOOT.XF.1.0-00301 S - IMAGE_VARIANT_STRING=M8996LAB S - OEM_IMAGE_VERSION_STRING=crm-ubuntu68 S - Boot Interface: UFS S - Secure Boot: Off S - Boot Config @ 0x00076044 = 0x000001c9 S - JTAG ID @ 0x000760f4 = 0x4003e0e1 S - OEM ID @ 0x000760f8 = 0x00000000 S - Serial Number @ 0x00074138 = 0xbe8b8597 S - OEM Config Row 0 @ 0x00074188 = 0x0000000000000000 S - OEM Config Row 1 @ 0x00074190 = 0x0000000000000000 S - Feature Config Row 0 @ 0x000741a0 = 0x0050000010000100 S - Feature Config Row 1 @ 0x000741a8 = 0x00fff00001ffffff S - Core 0 Frequency, 1228 MHz B - 0 - PBL, Start B - 10413 - bootable_media_detect_entry, Start B - 69786 - bootable_media_detect_success, Start B - 69789 - elf_loader_entry, Start B - 71330 - auth_hash_seg_entry, Start B - 71433 - auth_hash_seg_exit, Start B - 104654 - elf_segs_hash_verify_entry, Start B - 107155 - PBL, End B - 108610 - SBL1, Start B - 204075 - usb: hs_phy_nondrive_start B - 204411 - usb: PLL lock success - 0x3 B - 207400 - usb: hs_phy_nondrive_finish B - 211517 - boot_flash_init, Start D - 0 - boot_flash_init, Delta B - 218563 - sbl1_ddr_set_default_params, Start D - 0 - sbl1_ddr_set_default_params, Delta B - 226523 - boot_config_data_table_init, Start D - 207461 - boot_config_data_table_init, Delta - (60 Bytes) B - 438498 - CDT Version:3,Platform ID:24,Major ID:1,Minor ID:0,Subtype:0 B - 443165 - Image Load, Start D - 22356 - PMIC Image Loaded, Delta - (37272 Bytes) B - 465552 - pm_device_init, Start B - 471286 - PON REASON:PM0:0x20060 PM1:0x20020 B - 507611 - PM_SET_VAL:Skip D - 39955 - pm_device_init, Delta B - 509533 - pm_driver_init, Start D - 2897 - pm_driver_init, Delta B - 516121 - pm_sbl_chg_init, Start D - 91 - pm_sbl_chg_init, Delta B - 522892 - vsense_init, Start D - 0 - vsense_init, Delta B - 530730 - Pre_DDR_clock_init, Start D - 366 - Pre_DDR_clock_init, Delta B - 536525 - ddr_initialize_device, Start B - 540216 - 8996 v3.x detected, Max frequency = 1.8 GHz B - 547780 - ddr_initialize_device, Delta B - 549823 - Basic DDR tests done B - 2110783 - clock_init, Start D - 244 - clock_init, Delta B - 2114168 - Image Load, Start D - 5215 - QSEE Dev Config Image Loaded, Delta - (46008 Bytes) B - 2120177 - Image Load, Start D - 4758 - APDP Image Loaded, Delta - (0 Bytes) B - 2149121 - usb: fedl, vbus_low B - 2149182 - Image Load, Start D - 21503 - XBLRamDump Image Loaded, Delta - (342782 Bytes) B - 2225280 - usb: init start B - 2227079 - usb: PLL lock success , 0x2 B - 2233362 - usb: SUPER , 0x900e