Hi,

Thanks for the quick response.

R0 holds an valid address which belongs to TEE_RAM.

Inside that address the value is 0.

Regards,

Ajith

---

From: Jens Wiklander <jens.wiklander@linaro.org>
Sent: Thursday, January 5, 2017 2:55:32 PM

To: Ajith Kumar Kumsi
Cc: tee-dev@lists.linaro.org
Subject: Re: [Tee-dev] OpTee porting on ARMv7

 

Hi,

On Thu, Jan 5, 2017 at 10:11 AM, Ajith Kumar Kumsi
<ajithkumar.kumsi@inedasystems.com> wrote:
> Hi,
>
> While porting Op-tee.elf on ARM A5 board, it is giving a data abort.
>
> I further tried to debug the code, and I could see that in generic_boot.c
> inside "init_runtime" function when malloc_add_pool(__heap1_start,
> __heap1_end - __heap1_start) is called, __mutex_lock is getting called and
> when cpu_spin_lock(&m->spin_lock) is called
> at the below point it gives a data abort exception after "cmp r1,
> #SPINLOCK_UNLOCK".
>
> _spinlock_loop:
>     ldrex r1, [r0]
>     cmp r1, #SPINLOCK_UNLOCK
>     wfene
>
> Can you let me know if I need to make any modifications to make it work.

That piece of code is used by other platforms so I guess the problem
is with the input. What's in r0 would give some clue, because it's
supposed to point ot spinlock within __malloc_mu

Regards,
Jens

>
> Regards,
> Ajith
>
> ________________________________
> From: Jens Wiklander <jens.wiklander@linaro.org>
> Sent: Tuesday, November 29, 2016 6:25:53 PM
> To: Ajith Kumar Kumsi
> Cc: tee-dev@lists.linaro.org
> Subject: Re: [Tee-dev] OpTee porting on ARMv7
>
>
>
> On Tue, Nov 29, 2016 at 1:31 PM, Ajith Kumar Kumsi
> <ajithkumar.kumsi@inedasystems.com> wrote:
>>
>>
>> Hi,
>>
>> Thank you for the reply.
>>
>> As suggested, I have gone through the
>> http://www.slideshare.net/linaroorg/lcu14-302-how-to-port-optee-to-another-platform

LCU14 302- How to port OP-TEE to another platform www.slideshare.net LCU14 302- How to port OP-TEE to another platform ----- Speaker: Joakim Bech, Jens Wiklander and Pascal Brand

>> and https://github.com/OP-TEE/optee_os#3-platforms-supported

GitHub - OP-TEE/optee_os: Trusted side of the TEE github.com The optee_os git, contains the source code for the TEE in Linux using the ARM® TrustZone® technology. This component meets the GlobalPlatform TEE System ...

>>
>> I have downloaded optee_os.
>>
>> I have gone through the other platforms given under
>> "optee_os/core/arch/arm" and created a new platform and modified changes in
>> platform_config.h, conf.mk, main.c, uart.c, uart.h files accordingly related
>> to the new platform (arm7v-a (cortex a5)).
>>
>> I tried to export the platform to the new-platform name and tried to build
>> using "make".
>>
>> I can see that tee.bin got generate in optee_os/out/arm-plat-new/core.
>>
>> I tried to flash tee.elf in to SRAM and I tried to debug using eclipse, I
>> can see that it is getting halted at
>> optee_os/core/arch/arm/kernel/generic_entry_a32.S at line 58.
>>
>>  FUNC _start , :
>>
>>      58         b       .       /* Data abort */
>>
>> Please suggest me on how to proceed further in this regard.
>
>
> Since you've obviously got a data abort I'd suggest checking LR and DFAR for
> more clues to the abort.
>
> Regards,
> Jens
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud service.
> For more information please visit http://www.symanteccloud.com

Threat Protection Solutions | Symantec www.symanteccloud.com Backed by one of the most comprehensive global threat intelligence networks, Symantec protects against known and emerging cyber security threats.

> ______________________________________________________________________
> This email and any files transmitted with it are confidential and intended
> solely for the use of the individual or entity to whom they are addressed.
> If you have received this email in error please notify the system manager.
> This message contains confidential information and is intended only for the
> individual named. If you are not the named addressee you should not
> disseminate, distribute or copy this e-mail. Please notify the sender
> immediately by e-mail if you have received this e-mail by mistake and delete
> this e-mail from your system. If you are not the intended recipient you are
> notified that disclosing, copying, distributing or taking any action in
> reliance on the contents of this information is strictly prohibited.

______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please visit http://www.symanteccloud.com
______________________________________________________________________

This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited.