U-Boot 2017.11 (Jun 15 2018 - 15:14:19 +0900) Model: Zynq ZYBO Z7 Development Board Board: Xilinx Zynq I2C: ready DRAM: ECC disabled 1 GiB MMC: sdhci@e0100000: 0 SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB In: serial@e0001000 Out: serial@e0001000 Err: serial@e0001000 Model: Zynq ZYBO Z7 Development Board Board: Xilinx Zynq Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB eth0: ethernet@e000b000 reading uEnv.txt 515 bytes read in 19 ms (26.4 KiB/s) Importing environment from mmc ... *** U-Boot Boot Menu *** Boot Default U-Boot console Press UP/DOWN to move, ENTER to select Zynq> mmcinfo; fatload mmc 0 0x03000000 zImage ; fatload mmc 0 0x02A00000 zImage-zynq-zybo-z7.dtb ; setenv bootargs earlyprintk console=ttyPS0,115200 root=/dev/mmcblk0p2 rw rootwait ; fatload mmc 0 0x3E000000 tee_5.bin ; go 0x3E000000 ; Device: sdhci@e0100000 Manufacturer ID: 3 OEM: 5344 Name: SU04G Tran Speed: 50000000 Rd Block Len: 512 SD version 3.0 High Capacity: Yes Capacity: 3.7 GiB Bus Width: 4-bit Erase Group Size: 512 Bytes reading zImage 5496376 bytes read in 326 ms (16.1 MiB/s) reading zImage-zynq-zybo-z7.dtb 8283 bytes read in 26 ms (310.5 KiB/s) reading tee_5.bin 299520 bytes read in 37 ms (7.7 MiB/s) ## Starting application at 0x3E000000 ... D/TC:0 add_phys_mem:539 TEE_SHMEM_START type NSEC_SHM 0x3ff00000 size 0x00100000 D/TC:0 add_phys_mem:539 TA_RAM_START type TA_RAM 0x3e100000 size 0x01e00000 D/TC:0 add_phys_mem:539 VCORE_UNPG_RW_PA type TEE_RAM_RW 0x3e043000 size 0x000bd000 D/TC:0 add_phys_mem:539 VCORE_UNPG_RX_PA type TEE_RAM_RX 0x3e000000 size 0x00043000 D/TC:0 add_phys_mem:539 SLCR_BASE type IO_SEC 0xf8000000 size 0x00100000 D/TC:0 add_phys_mem:539 PL310_BASE type IO_SEC 0xf8f00000 size 0x00200000 D/TC:0 add_phys_mem:539 GIC_BASE type IO_SEC 0xf8f00000 size 0x00100000 D/TC:0 add_phys_mem:552 Physical mem map overlaps 0xf8f00000 D/TC:0 add_phys_mem:539 CONSOLE_UART_BASE type IO_NSEC 0xe0000000 size 0x00200000 D/TC:0 verify_special_mem_areas:477 No NSEC DDR memory area defined D/TC:0 add_va_space:578 type RES_VASPACE size 0x00a00000 D/TC:0 add_va_space:578 type SHM_VASPACE size 0x02000000 D/TC:0 dump_mmap_table:711 type TEE_RAM_RX va 0x3e000000..0x3e042fff pa 0x3e000000..0x3e042fff size 0x00043000 (smallpg) D/TC:0 dump_mmap_table:711 type TEE_RAM_RW va 0x3e043000..0x3e0fffff pa 0x3e043000..0x3e0fffff size 0x000bd000 (smallpg) D/TC:0 dump_mmap_table:711 type SHM_VASPACE va 0x3e100000..0x400fffff pa 0x00000000..0x01ffffff size 0x02000000 (pgdir) D/TC:0 dump_mmap_table:711 type IO_SEC va 0x40100000..0x402fffff pa 0xf8f00000..0xf90fffff size 0x00200000 (pgdir) D/TC:0 dump_mmap_table:711 type RES_VASPACE va 0x40300000..0x40cfffff pa 0x00000000..0x009fffff size 0x00a00000 (pgdir) D/TC:0 dump_mmap_table:711 type TA_RAM va 0x40d00000..0x42afffff pa 0x3e100000..0x3fefffff size 0x01e00000 (pgdir) D/TC:0 dump_mmap_table:711 type NSEC_SHM va 0x42b00000..0x42bfffff pa 0x3ff00000..0x3fffffff size 0x00100000 (pgdir) D/TC:0 dump_mmap_table:711 type IO_NSEC va 0x42c00000..0x42dfffff pa 0xe0000000..0xe01fffff size 0x00200000 (pgdir) D/TC:0 dump_mmap_table:711 type IO_SEC va 0x42e00000..0x42efffff pa 0xf8000000..0xf80fffff size 0x00100000 (pgdir) D/TC:0 core_mmu_alloc_l2:238 L2 table used: 1/4 I/TC: D/TC:0 init_canaries:164 #Stack canaries for stack_tmp[0] with top at 0x3e0439b8 D/TC:0 init_canaries:164 watch *0x3e0439bc D/TC:0 init_canaries:164 #Stack canaries for stack_tmp[1] with top at 0x3e0440f8 D/TC:0 init_canaries:164 watch *0x3e0440fc D/TC:0 init_canaries:165 #Stack canaries for stack_abt[0] with top at 0x3e0489b8 D/TC:0 init_canaries:165 watch *0x3e0489bc D/TC:0 init_canaries:165 #Stack canaries for stack_abt[1] with top at 0x3e0491f8 D/TC:0 init_canaries:165 watch *0x3e0491fc D/TC:0 init_canaries:167 #Stack canaries for stack_thread[0] with top at 0x3e046138 D/TC:0 init_canaries:167 watch *0x3e04613c D/TC:0 init_canaries:167 #Stack canaries for stack_thread[1] with top at 0x3e048178 D/TC:0 init_canaries:167 watch *0x3e04817c I/TC: OP-TEE version: 3.2.0-27-gbad91ef #1 Thứ ba, 24 Tháng bảy năm 2018 14:32:57 UTC arm D/TC:0 tee_ta_register_ta_store:534 Registering TA store: 'REE' (priority 10) D/TC:0 tee_ta_register_ta_store:534 Registering TA store: 'Secure Storage TA' (priority 9) D/TC:0 mobj_mapped_shm_init:559 Shared memory address range: 3e100000, 40100000 E/TC:0 plat_rng_init:354 Warning: seeding RNG with zeroes I/TC: Initialized D/TC:0 init_primary_helper:917 Primary CPU switching to normal world boot Booting Linux on physical CPU 0x0 Linux version 4.12.21-yocto-standard (oe-user@oe-host) (gcc version 7.3.0 (GCC) ) #1 SMP PREEMPT Wed Jul 25 12:24:30 JST 2018 CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5787d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache OF: fdt: Machine model: Zynq ZYBO Z7 Development Board earlycon: cdns0 at MMIO 0xe0001000 (options '115200n8') bootconsole [cdns0] enabled Memory policy: Data cache writealloc cma: Reserved 256 MiB at 0x20000000 percpu: Embedded 17 pages/cpu @df64e000 s40076 r8192 d21364 u69632 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260160 Kernel command line: earlycon PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 760496K/1047552K available (8192K kernel code, 642K rwdata, 2372K rodata, 1024K init, 721K bss, 24912K reserved, 262144K cma-reserved, 261120K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc0900000 (9184 kB) .init : 0xc0c00000 - 0xc0d00000 (1024 kB) .data : 0xc0d00000 - 0xc0da0a58 ( 643 kB) .bss : 0xc0da84e0 - 0xc0e5ca6c ( 722 kB) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 ftrace: allocating 30136 entries in 89 pages Preemptible hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS:16 nr_irqs:16 16 Unhandled fault: imprecise external abort (0x406) at 0x00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: : 406 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.12.21-yocto-standard #1 Hardware name: Xilinx Zynq Platform task: c0d07880 task.stack: c0d00000 PC is at regmap_mmio_read32le+0x24/0x28 LR is at regmap_mmio_read+0x3c/0x6c pc : [] lr : [] psr: 20000093 sp : c0d01e98 ip : c0d01ea8 fp : c0d01ea4 r10: 00000000 r9 : 00000000 r8 : c0d01f0c r7 : 00000a1c r6 : c0d01f0c r5 : 00000a1c r4 : df030bc0 r3 : f0802000 r2 : c0d01f0c r1 : f0802a1c r0 : 00000000 Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none Control: 18c5787d Table: 0000404a DAC: 00000051 Process swapper/0 (pid: 0, stack limit = 0xc0d00210) Stack: (0xc0d01e98 to 0xc0d02000) 1e80: c0d01ec4 c0d01ea8 1ea0: c0573b10 c05738fc df038a00 df038a00 00000a1c 00000a1c c0d01ed4 c0d01ec8 1ec0: c056ac44 c0573ae0 c0d01f04 c0d01ed8 c056d8b8 c056ac2c 00000000 00020202 1ee0: 00000000 df038a00 00000a1c 00070707 00000000 00000000 c0d01f34 c0d01f08 1f00: c056dda8 c056d830 df038a00 00000a1c df038a00 00000a1c 00070707 00020202 1f20: dffffe00 c0c5be38 c0d01f5c c0d01f38 c056f1cc c056dd1c 00000000 00000000 1f40: 00000000 c0da89a8 df675b50 c0d03c80 c0d01f8c c0d01f60 c0c0a854 c056f178 1f60: 00000000 00000000 00000000 dec00180 00000010 c0c5be28 c0da8500 ffffffff 1f80: c0d01f9c c0d01f90 c0c0a708 c0c0a798 c0d01fb4 c0d01fa0 c0c04020 c0c0a6fc 1fa0: 00000001 c0da8500 c0d01ff4 c0d01fb8 c0c00c14 c0c03fac ffffffff ffffffff 1fc0: 00000000 c0c00738 00000000 c0c5be38 c0da8794 c0d03c98 c0c5be34 c0d094d4 1fe0: 0000406a 413fc090 00000000 c0d01ff8 0000807c c0c00a14 00000000 00000000 [] (regmap_mmio_read32le) from [] (regmap_mmio_read+0x3c/0x6c) [] (regmap_mmio_read) from [] (_regmap_bus_reg_read+0x24/0x28) [] (_regmap_bus_reg_read) from [] (_regmap_read+0x94/0x17c) [] (_regmap_read) from [] (_regmap_update_bits+0x98/0xd8) [] (_regmap_update_bits) from [] (regmap_update_bits_base+0x60/0x84) [] (regmap_update_bits_base) from [] (zynq_early_slcr_init+0xc8/0x110) [] (zynq_early_slcr_init) from [] (zynq_irq_init+0x18/0x20) [] (zynq_irq_init) from [] (init_IRQ+0x80/0x90) [] (init_IRQ) from [] (start_kernel+0x20c/0x3bc) [] (start_kernel) from [<0000807c>] (0x807c) Code: e5903000 e0831001 e5910000 f57ff04f (e89da800) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Attempted to kill the idle task! ---[ end Kernel panic - not syncing: Attempted to kill the idle task! U-Boot SPL 2017.11 (Jun 15 2018 - 15:14:19) mmc boot