[PATCH v2 1/4] mmc: omap_hsmmc: Convert hsmmc driver to use device tree

Rajendra Nayak rnayak at ti.com
Thu Mar 8 03:46:01 UTC 2012


Hi Rob/Grant,

On Thursday 23 February 2012 05:31 PM, Rajendra Nayak wrote:
> Define dt bindings for the ti-omap-hsmmc, and adapt
> the driver to extract data (which was earlier passed as
> platform_data) from device tree.

Any comments on these bindings for omap hsmmc? All the dependent
patches/series on which this series was based have now made it to
the respective -next of Mark and Chris.

regards,
Rajendra

>
> Signed-off-by: Rajendra Nayak<rnayak at ti.com>
> ---
>   .../devicetree/bindings/mmc/ti-omap-hsmmc.txt      |   31 +++++++++
>   drivers/mmc/host/omap_hsmmc.c                      |   68 ++++++++++++++++++++
>   2 files changed, 99 insertions(+), 0 deletions(-)
>   create mode 100644 Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
>
> diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
> new file mode 100644
> index 0000000..e4fa8f0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
> @@ -0,0 +1,31 @@
> +* TI Highspeed MMC host controller for OMAP
> +
> +The Highspeed MMC Host Controller on TI OMAP family
> +provides an interface for MMC, SD, and SDIO types of memory cards.
> +
> +Required properties:
> +- compatible:
> + Should be "ti,omap2-hsmmc", for OMAP2/3 controllers
> + Should be "ti,omap4-hsmmc", for OMAP4 controllers
> +- ti,hwmods: Must be "mmc<n>", n is controller instance starting 1
> +- reg : should contain hsmmc registers location and length
> +
> +Optional properties:
> +ti,dual-volt: boolean, supports dual voltage cards
> +<supply-name>-supply: phandle to the regulator device tree node
> +"supply-name" examples are "vmmc", "vmmc_aux" etc
> +ti,bus-width: Number of data lines, default assumed is 1 if the property is missing.
> +cd-gpios: GPIOs for card detection
> +wp-gpios: GPIOs for write protection
> +ti,non-removable: non-removable slot (like eMMC)
> +
> +Example:
> +	mmc1: mmc at 0x4809c000 {
> +		compatible = "ti,omap4-hsmmc";
> +		reg =<0x4809c000 0x400>;
> +		ti,hwmods = "mmc1";
> +		ti,dual-volt;
> +		ti,bus-width =<4>;
> +		vmmc-supply =<&vmmc>; /* phandle to regulator node */
> +		ti,non-removable;
> +	};
> diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
> index 35f6dc1..0c93d58 100644
> --- a/drivers/mmc/host/omap_hsmmc.c
> +++ b/drivers/mmc/host/omap_hsmmc.c
> @@ -26,6 +26,9 @@
>   #include<linux/platform_device.h>
>   #include<linux/timer.h>
>   #include<linux/clk.h>
> +#include<linux/of.h>
> +#include<linux/of_gpio.h>
> +#include<linux/of_device.h>
>   #include<linux/mmc/host.h>
>   #include<linux/mmc/core.h>
>   #include<linux/mmc/mmc.h>
> @@ -1718,6 +1721,46 @@ static void omap_hsmmc_debugfs(struct mmc_host *mmc)
>
>   #endif
>
> +#ifdef CONFIG_OF
> +static struct omap_mmc_platform_data *of_get_hsmmc_pdata(struct device *dev)
> +{
> +	struct omap_mmc_platform_data *pdata;
> +	struct device_node *np = dev->of_node;
> +	u32 bus_width;
> +
> +	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
> +	if (!pdata)
> +		return NULL; /* out of memory */
> +
> +	if (of_find_property(np, "ti,dual-volt", NULL))
> +		pdata->controller_flags |= OMAP_HSMMC_SUPPORTS_DUAL_VOLT;
> +
> +	/* This driver only supports 1 slot */
> +	pdata->nr_slots = 1;
> +	pdata->slots[0].switch_pin = of_get_named_gpio(np, "cd-gpios", 0);
> +	pdata->slots[0].gpio_wp = of_get_named_gpio(np, "wp-gpios", 0);
> +
> +	if (of_find_property(np, "ti,non-removable", NULL)) {
> +		pdata->slots[0].nonremovable = true;
> +		pdata->slots[0].no_regulator_off_init = true;
> +	}
> +	of_property_read_u32(np, "ti,bus-width",&bus_width);
> +	if (bus_width == 4)
> +		pdata->slots[0].caps |= MMC_CAP_4_BIT_DATA;
> +	else if (bus_width == 8)
> +		pdata->slots[0].caps |= MMC_CAP_8_BIT_DATA;
> +	return pdata;
> +}
> +#else
> +static inline struct omap_mmc_platform_data
> +			*of_get_hsmmc_pdata(struct device *dev)
> +{
> +	return NULL;
> +}
> +#endif
> +
> +static const struct of_device_id omap_mmc_of_match[];
> +
>   static int __init omap_hsmmc_probe(struct platform_device *pdev)
>   {
>   	struct omap_mmc_platform_data *pdata = pdev->dev.platform_data;
> @@ -1725,6 +1768,14 @@ static int __init omap_hsmmc_probe(struct platform_device *pdev)
>   	struct omap_hsmmc_host *host = NULL;
>   	struct resource *res;
>   	int ret, irq;
> +	const struct of_device_id *match;
> +
> +	match = of_match_device(omap_mmc_of_match,&pdev->dev);
> +	if (match) {
> +		pdata = of_get_hsmmc_pdata(&pdev->dev);
> +		if (match->data)
> +			pdata->reg_offset = *(u16 *)match->data;
> +	}
>
>   	if (pdata == NULL) {
>   		dev_err(&pdev->dev, "Platform Data is missing\n");
> @@ -2120,12 +2171,29 @@ static struct dev_pm_ops omap_hsmmc_dev_pm_ops = {
>   	.runtime_resume = omap_hsmmc_runtime_resume,
>   };
>
> +#if defined(CONFIG_OF)
> +static u16 omap4_reg_offset = 0x100;
> +
> +static const struct of_device_id omap_mmc_of_match[] = {
> +	{
> +		.compatible = "ti,omap2-hsmmc",
> +	},
> +	{
> +		.compatible = "ti,omap4-hsmmc",
> +		.data =&omap4_reg_offset,
> +	},
> +	{},
> +}
> +MODULE_DEVICE_TABLE(of, omap_mmc_of_match);
> +#endif
> +
>   static struct platform_driver omap_hsmmc_driver = {
>   	.remove		= omap_hsmmc_remove,
>   	.driver		= {
>   		.name = DRIVER_NAME,
>   		.owner = THIS_MODULE,
>   		.pm =&omap_hsmmc_dev_pm_ops,
> +		.of_match_table = of_match_ptr(omap_mmc_of_match),
>   	},
>   };
>




More information about the linaro-dev mailing list