[PATCH v2 4/4] arm/dts: OMAP3: Add mmc controller nodes and board data

Rajendra Nayak rnayak at ti.com
Fri Mar 9 09:26:07 UTC 2012


On Friday 09 March 2012 11:16 AM, Grant Likely wrote:
> On Fri, 24 Feb 2012 10:49:00 -0800, Tony Lindgren<tony at atomide.com>  wrote:
>> * Rajendra Nayak<rnayak at ti.com>  [120223 19:29]:
>>> On Friday 24 February 2012 12:27 AM, Tony Lindgren wrote:
>>>>> --- a/arch/arm/boot/dts/omap3.dtsi
>>>>> +++ b/arch/arm/boot/dts/omap3.dtsi
>>>>> @@ -113,5 +113,31 @@
>>>>>   			#size-cells =<0>;
>>>>>   			ti,hwmods = "i2c3";
>>>>>   		};
>>>>> +
>>>>> +		mmc1: mmc at 1 {
>>>>> +			compatible = "ti,omap2-hsmmc";
>>>>> +			ti,hwmods = "mmc1";
>>>>> +			ti,dual-volt;
>>>>> +		};
>>>>> +
>>>>> +		mmc2: mmc at 2 {
>>>>> +			compatible = "ti,omap2-hsmmc";
>>>>> +			ti,hwmods = "mmc2";
>>>>> +		};
>>>>> +
>>>>> +		mmc3: mmc at 3 {
>>>>> +			compatible = "ti,omap2-hsmmc";
>>>>> +			ti,hwmods = "mmc3";
>>>>> +		};
>>>>> +
>>>>> +		mmc4: mmc at 4 {
>>>>> +			compatible = "ti,omap2-hsmmc";
>>>>> +			ti,hwmods = "mmc4";
>>>>> +		};
>>>>> +
>>>>> +		mmc5: mmc at 5 {
>>>>> +			compatible = "ti,omap2-hsmmc";
>>>>> +			ti,hwmods = "mmc5";
>>>>> +		};
>>>>>   	};
>>>>>   };
>>>>
>>>> These all should all be "ti,omap3-hsmmc" I guess?
>>>
>>> Well, I defined the binding such that both omap2 and omap3
>>> can use the same compatible "ti,omap2-hsmmc" since there is
>>> no difference in the way they are defined or handled. If thats
>>> confusing, I can have separate compatibles.
>>> Btw, I guess we do the same with a few other re-used IPs as well,
>>> I just checked and mcpsi does the same.
>>
>> Yeah let's use separate compatibles to avoid confusion.
>> For omap2 we also have the ti,omap2-mmc in addition to
>> ti,omap2-hsmmc..
>
> Yes, absolutely use separate compatible values.  It is always important
> to be specific as to the silicon implementing the IP.  The omap3 instance
> can also carry the omap2 string in its compatible list:
>
> 	compatible = "ti,omap3-hsmmc", "ti,omap2-hsmmc";

Sure, will repost with seperate compatible strings. Also missed adding
the 'status = "disable";' for unused mmc blocks in the board .dts file
causing unused mmc modules to get probed too. Will fix that as well.

thanks,
Rajendra

>
> g.




More information about the linaro-dev mailing list