Linaro-mm-sig October 2014

linaro-mm-sig@lists.linaro.org

10 participants
8 discussions

[PATCH v8 00/11] Add DRM for stih4xx platforms

by Benjamin Gaignard

This series of patches add the support of DRM/KMS drivers for STMicroelectronics chipsets stih416 and stih407. version 8: - Allow driver to be build as kernel module. - Use Universal Plane instead of legacy code. patches could be found here: git://git.linaro.org/people/benjamin.gaignard/kernel.git on branch: drm_kms_for_next-v8 version 7: - rebased on top of drm-next (2014-07-24) patches could be found here: git://git.linaro.org/people/benjamin.gaignard/kernel.git on branch: drm_kms_for_next-v7 version 6: - rebased on top of new component framework API. patches could be found here: git://git.linaro.org/people/benjamin.gaignard/kernel.git on branch: drm_kms_for_next-v6 version 5: - Rework sti_drm_drv probes functions to support deferred probe. This allow hdmi to delayed framebuffer creation until I2C is available. - Add ops functions in sti_layer structure to simpify GDP and VID code. - Add NOTES file to describe how the DRM concepts are mapped on hardware. patches could be found here: git://git.linaro.org/people/benjamin.gaignard/kernel.git on branch: drm_kms_for_next-v5 version 4: - Remove depency between TVout it subdevices HDMI and HDA - Rework and simplify VTG and VTAC code - Fix numbers of typo and indentation - Remove debug (will be push in separate patches) - Fix remarks done in previous patcheset patches could be found here: git://git.linaro.org/people/benjamin.gaignard/kernel.git on branch: drm_kms_for_next-v4 version 3: - Correctly split code between probe and bind funtions - Squash some commits - remove HQ-VDP device code to have a smaller patcheset, we will introduce it later. patches could be found here: git://git.linaro.org/people/benjamin.gaignard/kernel.git on branch: drm_kms_for_next-v3 version 2: - Use componentized device instead of register sub-devices in master driver probe function - Fix Makefile and Kconfig to only allow built-in compilation patches could be found here: git://git.linaro.org/people/benjamin.gaignard/kernel.git on branch: drm_kms_for_next-v2 version 1: - First path submission Hardware is split in two main blocks: Compositor and TVout. Each of them includes specific hardware IPs and the display timing are controlled by a specific Video Timing Generator hardware IP (VTG). Compositor is made of the follow hardware IPs: - GDP (Generic Display Pipeline) which is an entry point for graphic (RGB) buffers - VDP (Video Diplay Pipeline) which is an entry point for video (YUV) buffers - HQVDP (High Quality Video Display Processor) that supports scaling, deinterlacing and some miscellaneous image quality improvements. It fetches the Video decoded buffers from memory, processes them and pushes them to the Compositor through a HW dedicated bus. - Mixer is responsible of mixing all the entries depending of their respective z-order and layout TVout is divided in 3 parts: - HDMI to generate HDMI signals, depending of chipset version HDMI phy can change. - HDA to generate signals for HD analog TV - VIP to control/switch data path coming from Compositor On stih416 compositor and Tvout are on different dies so a Video Trafic Advance inter-die Communication mechanism (VTAC) is needed. +---------------------------------------------+ +----------------------------------------+ | +-------------------------------+ +----+ | | +----+ +--------------------------+ | | | | | | | | | | | +---------+ +----+ | | | | +----+ +------+ | | | | | | | | | VIP |---->|HDMI| | | | | |GPD +------------->| | | | | | | | | | | | +----+ | | | | +----+ |Mixer |--|-->| | | | | |---|->| switcher| | | | | | | | | | | | | | | | | +----+ | | | | | | | | | | | | | | | |---->|HDA | | | | | +------+ | |VTAC|========>|VTAC| | +---------+ +----+ | | | | | | | | | | | | | | | | Compositor | | | | | | | | TVout | | | +-------------------------------+ | | | | | | +--------------------------+ | | ^ | | | | | | ^ | | | | | | | | | | | | +--------------+ | | | | | | +-------------+ | | | VTG (master) |----->| | | | | |----->| VTG (slave) | | | +--------------+ +----+ | | +----+ +-------------+ | |Digital die | | Analog Die| +---------------------------------------------+ +----------------------------------------+ On stih407 Compositor and Tvout are on the same die +-----------------------------------------------------------------+ | +-------------------------------+ +--------------------------+ | | | | | +---------+ +----+ | | | | +----+ +------+ | | | VIP |---->|HDMI| | | | | |GPD +------------->| | | | | | +----+ | | | | +----+ |Mixer |--|--|->| switcher| | | | | +----+ +-----+ | | | | | | +----+ | | | | |VDP +-->+HQVDP+--->| | | | | |---->|HDA | | | | | +----+ +-----+ +------+ | | +---------+ +----+ | | | | | | | | | | Compositor | | TVout | | | +-------------------------------+ +--------------------------+ | | ^ ^ | | | | | | +--------------+ | | | VTG | | | +--------------+ | |Digital die | +-----------------------------------------------------------------+ In addition of the drivers for the IPs listed before a thin I2C driver (hdmiddc) is used by HDMI driver to retrieve EDID for monitor. To unify interfaces of GDP and VDP we create a "layer" interface called by compositor to control both GPD and VDP. Hardware have memory contraints (alignment, contiguous) so we use CMA drm helpers functions to allocate frame buffer. File naming convention is: - sti_* for IPs drivers - sti_drm_* for drm functions implementation. Benjamin Gaignard (11): drm: sti: add bindings for DRM driver drm: sti: add VTG driver drm: sti: add VTAC drivers drm: sti: add HDMI driver drm: sti: add HDA driver drm: sti: add TVOut driver drm: sti: add GDP layer drm: sti: add VID layer drm: sti: add Mixer drm: sti: add Compositor drm: sti: Add DRM driver itself .../devicetree/bindings/gpu/st,stih4xx.txt | 189 +++++ drivers/gpu/drm/Kconfig | 2 + drivers/gpu/drm/Makefile | 1 + drivers/gpu/drm/sti/Kconfig | 14 + drivers/gpu/drm/sti/Makefile | 21 + drivers/gpu/drm/sti/NOTES | 58 ++ drivers/gpu/drm/sti/sti_compositor.c | 279 +++++++ drivers/gpu/drm/sti/sti_compositor.h | 90 +++ drivers/gpu/drm/sti/sti_drm_crtc.c | 423 +++++++++++ drivers/gpu/drm/sti/sti_drm_crtc.h | 22 + drivers/gpu/drm/sti/sti_drm_drv.c | 241 ++++++ drivers/gpu/drm/sti/sti_drm_drv.h | 29 + drivers/gpu/drm/sti/sti_drm_plane.c | 195 +++++ drivers/gpu/drm/sti/sti_drm_plane.h | 18 + drivers/gpu/drm/sti/sti_gdp.c | 549 ++++++++++++++ drivers/gpu/drm/sti/sti_gdp.h | 16 + drivers/gpu/drm/sti/sti_hda.c | 794 ++++++++++++++++++++ drivers/gpu/drm/sti/sti_hdmi.c | 810 +++++++++++++++++++++ drivers/gpu/drm/sti/sti_hdmi.h | 88 +++ drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.c | 336 +++++++++ drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.h | 14 + drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.c | 211 ++++++ drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.h | 14 + drivers/gpu/drm/sti/sti_layer.c | 197 +++++ drivers/gpu/drm/sti/sti_layer.h | 123 ++++ drivers/gpu/drm/sti/sti_mixer.c | 249 +++++++ drivers/gpu/drm/sti/sti_mixer.h | 54 ++ drivers/gpu/drm/sti/sti_tvout.c | 648 +++++++++++++++++ drivers/gpu/drm/sti/sti_vid.c | 138 ++++ drivers/gpu/drm/sti/sti_vid.h | 12 + drivers/gpu/drm/sti/sti_vtac.c | 215 ++++++ drivers/gpu/drm/sti/sti_vtg.c | 366 ++++++++++ drivers/gpu/drm/sti/sti_vtg.h | 28 + 33 files changed, 6444 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpu/st,stih4xx.txt create mode 100644 drivers/gpu/drm/sti/Kconfig create mode 100644 drivers/gpu/drm/sti/Makefile create mode 100644 drivers/gpu/drm/sti/NOTES create mode 100644 drivers/gpu/drm/sti/sti_compositor.c create mode 100644 drivers/gpu/drm/sti/sti_compositor.h create mode 100644 drivers/gpu/drm/sti/sti_drm_crtc.c create mode 100644 drivers/gpu/drm/sti/sti_drm_crtc.h create mode 100644 drivers/gpu/drm/sti/sti_drm_drv.c create mode 100644 drivers/gpu/drm/sti/sti_drm_drv.h create mode 100644 drivers/gpu/drm/sti/sti_drm_plane.c create mode 100644 drivers/gpu/drm/sti/sti_drm_plane.h create mode 100644 drivers/gpu/drm/sti/sti_gdp.c create mode 100644 drivers/gpu/drm/sti/sti_gdp.h create mode 100644 drivers/gpu/drm/sti/sti_hda.c create mode 100644 drivers/gpu/drm/sti/sti_hdmi.c create mode 100644 drivers/gpu/drm/sti/sti_hdmi.h create mode 100644 drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.c create mode 100644 drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.h create mode 100644 drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.c create mode 100644 drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.h create mode 100644 drivers/gpu/drm/sti/sti_layer.c create mode 100644 drivers/gpu/drm/sti/sti_layer.h create mode 100644 drivers/gpu/drm/sti/sti_mixer.c create mode 100644 drivers/gpu/drm/sti/sti_mixer.h create mode 100644 drivers/gpu/drm/sti/sti_tvout.c create mode 100644 drivers/gpu/drm/sti/sti_vid.c create mode 100644 drivers/gpu/drm/sti/sti_vid.h create mode 100644 drivers/gpu/drm/sti/sti_vtac.c create mode 100644 drivers/gpu/drm/sti/sti_vtg.c create mode 100644 drivers/gpu/drm/sti/sti_vtg.h -- 1.9.1

8 years

[RFC 0/4] dma-buf Constraints-Enabled Allocation helpers

by Sumit Semwal

Hi, Why: ==== While sharing buffers using dma-buf, currently there's no mechanism to let devices share their memory access constraints with each other to allow for delayed allocation of backing storage. This RFC attempts to introduce the idea of memory constraints of a device, and how these constraints can be shared and used to help allocate buffers that can satisfy requirements of all devices attached to a particular dma-buf. How: ==== A constraints_mask is added to dma_parms of the device, and at the time of each device attachment to a dma-buf, the dma-buf uses this constraints_mask to calculate the access_mask for the dma-buf. Allocators can be defined for each of these constraints_masks, and then helper functions can be used to allocate the backing storage from the matching allocator satisfying the constraints of all devices interested. A new miscdevice, /dev/cenalloc [1] is created, which acts as the dma-buf exporter to make this transparent to the devices. More details in the patch description of "cenalloc: Constraint-Enabled Allocation helpers for dma-buf". At present, the constraint_mask is only a bitmask, but it should be possible to change it to a struct and adapt the constraint_mask calculation accordingly, based on discussion. Important requirement: ====================== Of course, delayed allocation can only work if all participating devices will wait for other devices to have 'attached' before mapping the buffer for the first time. As of now, users of dma-buf(drm prime, v4l2 etc) call the attach() and then map_attachment() almost immediately after it. This would need to be changed if they were to benefit from constraints. What 'cenalloc' is not: ======================= - not 'general' allocator helpers - useful only for constraints-enabled devices that share buffers with others using dma-buf. - not a replacement for existing allocation mechanisms inside various subsystems; merely a possible alternative. - no page-migration - it would be very complementary to the delayed allocation suggested here. TODOs: ====== - demonstration test cases - vma helpers for allocators - more sample allocators - userspace ioctl (It should be a simple one, and we have one ready, but wanted to agree on the kernel side of things first) May the brickbats begin, please! :) Best regards, ~Sumit. [1]: 'C'onstraints 'EN'abled 'ALLOC'ation helpers = cenalloc: it might not be a very appealing name, so suggestions are very welcome! Benjamin Gaignard (1): cenalloc: a sample allocator for contiguous page allocation Sumit Semwal (3): dma-buf: Add constraints sharing information cenalloc: Constraint-Enabled Allocation helpers for dma-buf cenalloc: Build files for constraint-enabled allocation helpers MAINTAINERS | 1 + drivers/Kconfig | 2 + drivers/Makefile | 1 + drivers/cenalloc/Kconfig | 8 + drivers/cenalloc/Makefile | 3 + drivers/cenalloc/cenalloc.c | 597 ++++++++++++++++++++++++++++++ drivers/cenalloc/cenalloc.h | 99 +++++ drivers/cenalloc/cenalloc_priv.h | 188 ++++++++++ drivers/cenalloc/cenalloc_system_contig.c | 225 +++++++++++ drivers/dma-buf/dma-buf.c | 50 ++- include/linux/device.h | 7 +- include/linux/dma-buf.h | 14 + 12 files changed, 1189 insertions(+), 6 deletions(-) create mode 100644 drivers/cenalloc/Kconfig create mode 100644 drivers/cenalloc/Makefile create mode 100644 drivers/cenalloc/cenalloc.c create mode 100644 drivers/cenalloc/cenalloc.h create mode 100644 drivers/cenalloc/cenalloc_priv.h create mode 100644 drivers/cenalloc/cenalloc_system_contig.c -- 1.9.1

9 years, 4 months

[PATCH v2 00/18] Exynos SYSMMU (IOMMU) integration with DT and DMA-mapping subsystem

by Marek Szyprowski

Hello Everyone, This is yet another attempt to finally make Exynos SYSMMU driver fully integrated with DMA-mapping subsystem. Previous approach is available here: https://lkml.org/lkml/2014/8/5/183 I meantime, there have been a discussion about the way the iommu driver should be integrated with dma-mapping subsystem, which resulted in "[RFC PATCH v3 0/7] Introduce automatic DMA configuration for IOMMU masters" patches prepared by Will Deacon: http://www.spinics.net/lists/arm-kernel/msg362076.html Those patches removed the need to use bus-specific notifiers for initialization. Main changes since previous version of my patches: 1. rebased onto "[RFC PATCH v3 0/7] Introduce automatic DMA configuration for IOMMU masters" patches, changed initialization from bus notifiers to DT related callbacks 2. removed support for separate IO address spaces - this will be discussed separately after the basic support gets merged 3. removed support for power domain notifier-based runtime power management - this also will be discussed separately later I hope that the driver with above changes will be easier to be merged to v3.18. Best regards Marek Szyprowski Samsung R&D Institute Poland Patch summary: Marek Szyprowski (18): arm: dma-mapping: arm_iommu_attach_device: automatically set max_seg_size arm: exynos: bind power domains earlier, on device creation drm: exynos: detach from default dma-mapping domain on init clk: exynos: add missing smmu_g2d clock and update comments ARM: DTS: Exynos4: add System MMU nodes iommu: exynos: don't read version register on every tlb operation iommu: exynos: remove unused functions iommu: exynos: remove useless spinlock iommu: exynos: refactor function parameters to simplify code iommu: exynos: remove unused functions, part 2 iommu: exynos: remove useless device_add/remove callbacks iommu: exynos: add support for binding more than one sysmmu to master device iommu: exynos: add support for runtime_pm iommu: exynos: rename variables to reflect their purpose iommu: exynos: document internal structures iommu: exynos: remove excessive includes and sort others alphabetically iommu: exynos: init from dt-specific callback instead of initcall iommu: exynos: add callback for initializing devices from device tree arch/arm/boot/dts/exynos4.dtsi | 117 +++++++ arch/arm/boot/dts/exynos4210.dtsi | 23 ++ arch/arm/boot/dts/exynos4x12.dtsi | 82 +++++ arch/arm/mach-exynos/pm_domains.c | 12 +- arch/arm/mm/dma-mapping.c | 16 + drivers/clk/samsung/clk-exynos4.c | 1 + drivers/gpu/drm/exynos/exynos_drm_iommu.c | 3 + drivers/iommu/exynos-iommu.c | 494 ++++++++++++++---------------- include/dt-bindings/clock/exynos4.h | 10 +- 9 files changed, 483 insertions(+), 275 deletions(-) -- 1.9.2

9 years, 7 months

[PATCH v2 0/3] CMA & device tree, another approach

by Marek Szyprowski

Hello, This is another approach to finish support for reserved memory regions defined in device tree. Previous attempts (http://lists.linaro.org/pipermail/linaro-mm-sig/2014-February/003738.html and https://lkml.org/lkml/2014/7/14/108) ended in merging parts of the code and documentation. Merged patches allow to reserve memory, but there is still no reserved memory drivers nor any code that actually uses reserved memory regions. The final conclusion from the above mentioned threads is that there is no automated reserved memory initialization. All drivers that want to use reserved memory, should initialize it on their own. This patch series provides two driver for reserved memory regions (one based on CMA and one based on dma_coherent allocator). The main improvement comparing to the previous version is removal of automated reserved memory for every device and support for named memory regions. Those patches are for merging, rebased on top of recent linux-next tree. Best regards Marek Szyprowski Samsung R&D Institute Poland Changes since v1 (https://lkml.org/lkml/2014/8/26/339): - removed patches for named reserved regions - they will be discussed separately - added a check for 'no-map' property to dma coherent allocator (suggested by Laura Abbott) - removed example code for s5p-mfc driver Changes since '[PATCH v2 RESEND 0/4] CMA & device tree, once again' version: (https://lkml.org/lkml/2014/7/14/108) - added return error value to of_reserved_mem_device_init() - added support for named memory regions (so more than one region can be defined per device) - added usage example - converted custom reserved memory code used by s5p-mfc driver to the generic reserved memory handling code Patch summary: Marek Szyprowski (3): drivers: of: add return value to of_reserved_mem_device_init drivers: dma-coherent: add initialization from device tree drivers: dma-contiguous: add initialization from device tree drivers/base/dma-coherent.c | 145 ++++++++++++++++++++++++++++++++++------ drivers/base/dma-contiguous.c | 71 ++++++++++++++++++++ drivers/of/of_reserved_mem.c | 3 +- include/linux/cma.h | 3 + include/linux/of_reserved_mem.h | 9 ++- mm/cma.c | 62 ++++++++++++++--- 6 files changed, 259 insertions(+), 34 deletions(-) -- 1.9.2

9 years, 7 months

[PATCH] drm: sti: remove gpio for HDMI hot plug detection

by Benjamin Gaignard

gpio used for HDMI hot plug detection is useless, HDMI_STI register contains an hot plug detection status bit. Fix binding documentation. Signed-off-by: Benjamin Gaignard <benjamin.gaignard(a)linaro.org> --- Documentation/devicetree/bindings/gpu/st,stih4xx.txt | 2 -- drivers/gpu/drm/sti/sti_hdmi.c | 11 ++--------- drivers/gpu/drm/sti/sti_hdmi.h | 5 +++-- 3 files changed, 5 insertions(+), 13 deletions(-) diff --git a/Documentation/devicetree/bindings/gpu/st,stih4xx.txt b/Documentation/devicetree/bindings/gpu/st,stih4xx.txt index 8885d9e..32cfc7b 100644 --- a/Documentation/devicetree/bindings/gpu/st,stih4xx.txt +++ b/Documentation/devicetree/bindings/gpu/st,stih4xx.txt @@ -68,7 +68,6 @@ STMicroelectronics stih4xx platforms number of clocks may depend of the SoC type. - clock-names: names of the clocks listed in clocks property in the same order. - - hdmi,hpd-gpio: gpio id to detect if an hdmi cable is plugged or not. - ddc: phandle of an I2C controller used for DDC EDID probing sti-hda: @@ -174,7 +173,6 @@ Example: interrupt-names = "irq"; clock-names = "pix", "tmds", "phy", "audio"; clocks = <&clockgen_c_vcc CLK_S_PIX_HDMI>, <&clockgen_c_vcc CLK_S_TMDS_HDMI>, <&clockgen_c_vcc CLK_S_HDMI_REJECT_PLL>, <&clockgen_b1 CLK_S_PCM_0>; - hdmi,hpd-gpio = <&PIO2 5>; }; sti-hda@fe85a000 { diff --git a/drivers/gpu/drm/sti/sti_hdmi.c b/drivers/gpu/drm/sti/sti_hdmi.c index 7673189..09f39c5 100644 --- a/drivers/gpu/drm/sti/sti_hdmi.c +++ b/drivers/gpu/drm/sti/sti_hdmi.c @@ -130,8 +130,7 @@ static irqreturn_t hdmi_irq_thread(int irq, void *arg) /* Hot plug/unplug IRQ */ if (hdmi->irq_status & HDMI_INT_HOT_PLUG) { - /* read gpio to get the status */ - hdmi->hpd = gpio_get_value(hdmi->hpd_gpio); + hdmi->hpd = readl(hdmi->regs + HDMI_STA) & HDMI_STA_HOT_PLUG; if (hdmi->drm_dev) drm_helper_hpd_irq_event(hdmi->drm_dev); } @@ -767,13 +766,7 @@ static int sti_hdmi_probe(struct platform_device *pdev) return PTR_ERR(hdmi->clk_audio); } - hdmi->hpd_gpio = of_get_named_gpio(np, "hdmi,hpd-gpio", 0); - if (hdmi->hpd_gpio < 0) { - DRM_ERROR("Failed to get hdmi hpd-gpio\n"); - return -EIO; - } - - hdmi->hpd = gpio_get_value(hdmi->hpd_gpio); + hdmi->hpd = readl(hdmi->regs + HDMI_STA) & HDMI_STA_HOT_PLUG; init_waitqueue_head(&hdmi->wait_event); diff --git a/drivers/gpu/drm/sti/sti_hdmi.h b/drivers/gpu/drm/sti/sti_hdmi.h index d00a3e0..3d22390 100644 --- a/drivers/gpu/drm/sti/sti_hdmi.h +++ b/drivers/gpu/drm/sti/sti_hdmi.h @@ -14,6 +14,9 @@ #define HDMI_STA 0x0010 #define HDMI_STA_DLL_LCK BIT(5) +#define HDMI_STA_HOT_PLUG_SHIFT 4 +#define HDMI_STA_HOT_PLUG (1 << HDMI_STA_HOT_PLUG_SHIFT) + struct sti_hdmi; struct hdmi_phy_ops { @@ -37,7 +40,6 @@ struct hdmi_phy_ops { * @irq_status: interrupt status register * @phy_ops: phy start/stop operations * @enabled: true if hdmi is enabled else false - * @hpd_gpio: hdmi hot plug detect gpio number * @hpd: hot plug detect status * @wait_event: wait event * @event_received: wait event status @@ -57,7 +59,6 @@ struct sti_hdmi { u32 irq_status; struct hdmi_phy_ops *phy_ops; bool enabled; - int hpd_gpio; bool hpd; wait_queue_head_t wait_event; bool event_received; -- 1.9.1

9 years, 7 months

[PATCH] drm: sti: allow to change hdmi ddc i2c adapter

by Benjamin Gaignard

Depending of the board configuration i2c for ddc could change, this patch allow to use a phandle to specify which i2c controller to use. Signed-off-by: Benjamin Gaignard <benjamin.gaignard(a)linaro.org> --- .../devicetree/bindings/gpu/st,stih4xx.txt | 1 + drivers/gpu/drm/sti/sti_hdmi.c | 40 +++++++++++++++------- drivers/gpu/drm/sti/sti_hdmi.h | 1 + 3 files changed, 29 insertions(+), 13 deletions(-) diff --git a/Documentation/devicetree/bindings/gpu/st,stih4xx.txt b/Documentation/devicetree/bindings/gpu/st,stih4xx.txt index 2d150c3..8885d9e 100644 --- a/Documentation/devicetree/bindings/gpu/st,stih4xx.txt +++ b/Documentation/devicetree/bindings/gpu/st,stih4xx.txt @@ -69,6 +69,7 @@ STMicroelectronics stih4xx platforms - clock-names: names of the clocks listed in clocks property in the same order. - hdmi,hpd-gpio: gpio id to detect if an hdmi cable is plugged or not. + - ddc: phandle of an I2C controller used for DDC EDID probing sti-hda: Required properties: diff --git a/drivers/gpu/drm/sti/sti_hdmi.c b/drivers/gpu/drm/sti/sti_hdmi.c index ef93156..7673189 100644 --- a/drivers/gpu/drm/sti/sti_hdmi.c +++ b/drivers/gpu/drm/sti/sti_hdmi.c @@ -481,17 +481,15 @@ static const struct drm_bridge_funcs sti_hdmi_bridge_funcs = { static int sti_hdmi_connector_get_modes(struct drm_connector *connector) { - struct i2c_adapter *i2c_adap; + struct sti_hdmi_connector *hdmi_connector + = to_sti_hdmi_connector(connector); + struct sti_hdmi *hdmi = hdmi_connector->hdmi; struct edid *edid; int count; DRM_DEBUG_DRIVER("\n"); - i2c_adap = i2c_get_adapter(1); - if (!i2c_adap) - goto fail; - - edid = drm_get_edid(connector, i2c_adap); + edid = drm_get_edid(connector, hdmi->ddc_adapt); if (!edid) goto fail; @@ -604,29 +602,38 @@ static int sti_hdmi_bind(struct device *dev, struct device *master, void *data) struct sti_hdmi_connector *connector; struct drm_connector *drm_connector; struct drm_bridge *bridge; - struct i2c_adapter *i2c_adap; + struct device_node *ddc; int err; - i2c_adap = i2c_get_adapter(1); - if (!i2c_adap) - return -EPROBE_DEFER; + ddc = of_parse_phandle(dev->of_node, "ddc", 0); + if (ddc) { + hdmi->ddc_adapt = of_find_i2c_adapter_by_node(ddc); + if (!hdmi->ddc_adapt) { + err = -EPROBE_DEFER; + of_node_put(ddc); + return err; + } + + of_node_put(ddc); + } /* Set the drm device handle */ hdmi->drm_dev = drm_dev; encoder = sti_hdmi_find_encoder(drm_dev); if (!encoder) - return -ENOMEM; + goto err_adapt; connector = devm_kzalloc(dev, sizeof(*connector), GFP_KERNEL); if (!connector) - return -ENOMEM; + goto err_adapt; + connector->hdmi = hdmi; bridge = devm_kzalloc(dev, sizeof(*bridge), GFP_KERNEL); if (!bridge) - return -ENOMEM; + goto err_adapt; bridge->driver_private = hdmi; drm_bridge_init(drm_dev, bridge, &sti_hdmi_bridge_funcs); @@ -663,6 +670,8 @@ err_sysfs: err_connector: drm_bridge_cleanup(bridge); drm_connector_cleanup(drm_connector); +err_adapt: + put_device(&hdmi->ddc_adapt->dev); return -EINVAL; } @@ -789,6 +798,11 @@ static int sti_hdmi_probe(struct platform_device *pdev) static int sti_hdmi_remove(struct platform_device *pdev) { + struct sti_hdmi *hdmi = dev_get_drvdata(&pdev->dev); + + if (hdmi->ddc_adapt) + put_device(&hdmi->ddc_adapt->dev); + component_del(&pdev->dev, &sti_hdmi_ops); return 0; } diff --git a/drivers/gpu/drm/sti/sti_hdmi.h b/drivers/gpu/drm/sti/sti_hdmi.h index 61bec65..d00a3e0 100644 --- a/drivers/gpu/drm/sti/sti_hdmi.h +++ b/drivers/gpu/drm/sti/sti_hdmi.h @@ -62,6 +62,7 @@ struct sti_hdmi { wait_queue_head_t wait_event; bool event_received; struct reset_control *reset; + struct i2c_adapter *ddc_adapt; }; u32 hdmi_read(struct sti_hdmi *hdmi, int offset); -- 1.9.1

9 years, 7 months

[PATCH] drm: sti: use drm_crtc_vblank_{on/off} instead of drm_vblank_{on/off}

by Benjamin Gaignard

Make sure that vblank is enabled when crtc commit is call. Replace drm_vblank_off() by drm_crtc_vblank_off() Signed-off-by: Benjamin Gaignard <benjamin.gaignard(a)linaro.org> --- drivers/gpu/drm/sti/sti_drm_crtc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/sti/sti_drm_crtc.c b/drivers/gpu/drm/sti/sti_drm_crtc.c index d2ae0c0..38c4799 100644 --- a/drivers/gpu/drm/sti/sti_drm_crtc.c +++ b/drivers/gpu/drm/sti/sti_drm_crtc.c @@ -61,6 +61,8 @@ static void sti_drm_crtc_commit(struct drm_crtc *crtc) /* Enable layer on mixer */ if (sti_mixer_set_layer_status(mixer, layer, true)) DRM_ERROR("Can not enable layer at mixer\n"); + + drm_crtc_vblank_on(crtc); } static bool sti_drm_crtc_mode_fixup(struct drm_crtc *crtc, @@ -221,7 +223,7 @@ static void sti_drm_crtc_disable(struct drm_crtc *crtc) /* Then disable layer itself */ sti_layer_disable(layer); - drm_vblank_off(crtc->dev, mixer->id); + drm_crtc_vblank_off(crtc); /* Disable pixel clock and compo IP clocks */ if (mixer->id == STI_MIXER_MAIN) { -- 1.9.1

9 years, 7 months

Ideal Android device to do Audio Multimedia Android stuff

by Viswanath Puttagunta

Hi All, I lost the only Android Tablet that I had to hack around and in the market for new Android Tablet. Needs to be stuff I can buy personally, so Juno / Vexpress is out the window. What would you recommend I buy? Below are specific use cases i. Work on NEON optimizations for Audio libraries (Vorbis, FLAC etc) in **Android** context. ii. So, would obviously like to have a reference Android baseline build that is actively used in Linaro. Is anyone in LMG using builds available for Nexus10 <http://releases.linaro.org/14.09/android/nexus10> and Nexus7 <http://releases.linaro.org/14.09/android/nexus7-2013> actively right now? How official are these builds? Regards, Vish (Viswanath Puttagunta) Cell: 972-342-0205 Technical Program Manager Member Services, Linaro

9 years, 7 months

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Linaro-mm-sig October 2014