Team,
To improve the build experience for people we finally have build
scripts for both Android and the kernel. I'd like everyone to start
using these to build the platforms, and file bugs etc... on them so
that we can use these to ensure our build build locally. I'd also like
to make a QA test thats along the lines of:
QA test 1
Take untouched local system
Add packages
Build Android with script
QA test 2
Take untouched local system
Add packages
Build kernel with script
I think if we really focus on improving the local build experience, we
can ensure that people can have as easy a time working source as they
do working with prebuilt binaries via linaro-android-media-create.
Tracking this through:
https://blueprints.launchpad.net/linaro-android/+spec/improve-build-environ…
--
Zach Pfeffer
Android Platform Team Lead, Linaro Platform Teams
Linaro.org | Open source software for ARM SoCs
Follow Linaro: http://www.facebook.com/pages/Linarohttp://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog
Dear All,
While Androdizing Linux Linaro 3.3 kernel on Origen Board.
I am facing this issue:
W/SurfaceFlinger( 2280): ANDROID_WAIT_FOR_FB_WAKE failed (Bad file
number)
W/SurfaceFlinger( 2280): ANDROID_WAIT_FOR_FB_SLEEP failed (Bad file number)
Mostly, I think this due to the removal of EarlySuspend driver from Android
3.3 kernel.
Any comments are welcome.
With Regards,
Annamalai
Hi Team,
I am trying to install prebuilt android images into sd card by giving following command:
./linaro-android-media-create --mmc /dev/sdd --dev panda --system /home/srakesh/Downloads/lin1/system.tar.bz2 --userdata /home/srakesh/Downloads/lin1/userdata.tar.bz2 --boot /home/srakesh/Downloads/lin1/boot.tar.bz2
after giving this command i am getting following log:
====================================================================
linaro-android-media-create is EXPERIMENTAL
The command line parameters as well as the distribution format will
be changed and we will not keep backward compatibility for the
current version here.
====================================================================
I see...
Device Mount point Size
/dev/sda none 476940MB
/dev/sda1 / 333887MB
/dev/sda2 none 47682MB
/dev/sda5 /tmp 28609MB
/dev/sda6 none 19072MB
/dev/sdb none 0MB
/dev/sdc none 0MB
/dev/sdd none 3781MB
/dev/sde none 0MB
/dev/sr0 none 0MB
Are you 100% sure, on selecting [/dev/sdd] (y/n)? y
Checking that no-one is using this disk right now ...
OK
Warning: bad partition start (earliest 1318913)
Warning: partition 1 does not end at a cylinder boundary
If you created or changed a DOS partition, /dev/foo7, say, then use dd(1)
to zero the first 512 bytes: dd if=/dev/zero of=/dev/foo7 bs=512 count=1
(See fdisk(8).)
Formating boot partition
mkfs.vfat 3.0.7 (24 Dec 2009)
mke2fs 1.41.11 (14-Mar-2010)
Filesystem label=userdata
OS type: Linux
Block size=1024 (log=0)
Fragment size=1024 (log=0)
Stride=0 blocks, Stripe width=0 blocks
131072 inodes, 524272 blocks
26213 blocks (5.00%) reserved for the super user
First data block=1
Maximum filesystem blocks=67633152
64 block groups
8192 blocks per group, 8192 fragments per group
2048 inodes per group
Superblock backups stored on blocks:
8193, 24577, 40961, 57345, 73729, 204801, 221185, 401409
Writing inode tables: done
Creating journal (8192 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 37 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
mke2fs 1.41.11 (14-Mar-2010)
Filesystem label=cache
OS type: Linux
Block size=1024 (log=0)
Fragment size=1024 (log=0)
Stride=0 blocks, Stripe width=0 blocks
65536 inodes, 262144 blocks
13107 blocks (5.00%) reserved for the super user
First data block=1
Maximum filesystem blocks=67371008
32 block groups
8192 blocks per group, 8192 fragments per group
2048 inodes per group
Superblock backups stored on blocks:
8193, 24577, 40961, 57345, 73729, 204801, 221185
Writing inode tables: done
Creating journal (8192 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 25 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
mke2fs 1.41.11 (14-Mar-2010)
Filesystem label=system
OS type: Linux
Block size=1024 (log=0)
Fragment size=1024 (log=0)
Stride=0 blocks, Stripe width=0 blocks
65536 inodes, 262144 blocks
13107 blocks (5.00%) reserved for the super user
First data block=1
Maximum filesystem blocks=67371008
32 block groups
8192 blocks per group, 8192 fragments per group
2048 inodes per group
Superblock backups stored on blocks:
8193, 24577, 40961, 57345, 73729, 204801, 221185
Writing inode tables: done
Creating journal (8192 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 23 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
mkfs.vfat 3.0.7 (24 Dec 2009)
Image Name: boot script
Created: Wed Apr 4 15:25:15 2012
Image Type: ARM Linux Script (uncompressed)
Data Size: 331 Bytes = 0.32 kB = 0.00 MB
Load Address: 0x00000000
Entry Point: 0x00000000
Contents:
Image 0: 323 Bytes = 0 kB = 0 MB
mv: writing `/tmp/tmprZaNqT/system-disc/modules/snd-pcm-oss.ko': No space left on device
mv: writing `/tmp/tmprZaNqT/system-disc/modules/wl1273-core.ko': No space left on device
mv: writing `/tmp/tmprZaNqT/system-disc/modules/hidp.ko': No space left on device
mv: writing `/tmp/tmprZaNqT/system-disc/modules/snd-mixer-oss.ko': No space left on device
mv: writing `/tmp/tmprZaNqT/system-disc/modules/btwilink.ko': No space left on device
mv: cannot create directory `/tmp/tmprZaNqT/system-disc/share/ffmpeg': No space left on device
mv: cannot create directory `/tmp/tmprZaNqT/system-disc/tts': No space left on device
mv: cannot create directory `/tmp/tmprZaNqT/system-disc/usr': No space left on device
mv: cannot create directory `/tmp/tmprZaNqT/system-disc/vendor': No space left on device
mv: cannot create directory `/tmp/tmprZaNqT/system-disc/xbin': No space left on device
Traceback (most recent call last):
File "./linaro-android-media-create", line 145, in <module>
populate_partition(SYSTEM_DIR + "/system", SYSTEM_DISK, system_partition)
File "/home/srakesh/Downloads/linaro-image-tools-0.4.8/linaro_image_tools/media_create/rootfs.py", line 29, in populate_partition
move_contents(content_dir, root_disk)
File "/home/srakesh/Downloads/linaro-image-tools-0.4.8/linaro_image_tools/media_create/rootfs.py", line 120, in move_contents
cmd_runner.run(mv_cmd, as_root=True).wait()
File "/home/srakesh/Downloads/linaro-image-tools-0.4.8/linaro_image_tools/cmd_runner.py", line 87, in wait
raise SubcommandNonZeroReturnValue(self._my_args, returncode)
linaro_image_tools.cmd_runner.SubcommandNonZeroReturnValue: Sub process "['mv', '/tmp/tmprZaNqT/system/system/app', '/tmp/tmprZaNqT/system/system/bin', '/tmp/tmprZaNqT/system/system/build.prop', '/tmp/tmprZaNqT/system/system/etc', '/tmp/tmprZaNqT/system/system/fonts', '/tmp/tmprZaNqT/system/system/framework', '/tmp/tmprZaNqT/system/system/include', '/tmp/tmprZaNqT/system/system/lib', '/tmp/tmprZaNqT/system/system/media', '/tmp/tmprZaNqT/system/system/modules', '/tmp/tmprZaNqT/system/system/share', '/tmp/tmprZaNqT/system/system/tts', '/tmp/tmprZaNqT/system/system/usr', '/tmp/tmprZaNqT/system/system/vendor', '/tmp/tmprZaNqT/system/system/xbin', '/tmp/tmprZaNqT/system-disc']" returned a non-zero value: 1
so please help me in this regard.
Thanks & Regards
----------------
Rakesh S
Hi Team,
I am trying to install prebuilt images for pandaboard by following steps,
1. Download the boot.tar.bz2,system.tar.bz2 and userdata.tar.bz2 tarballs from the Downloads link below (Downloads > target > product >pandaboard) and execute the following commands:
2.Install the linaro-image-tools using either :
bzr branch lp:linaro-image-tools
OR
sudo add-apt-repository ppa:linaro-maintainers/tools
sudo apt-get update
sudo apt-get install linaro-image-tools
Flash the image :
./linaro-image-tools/linaro-android-media-create --mmc /dev/sdc --dev panda --system system.tar.bz2 --userdata userdata.tar.bz2
--boot boot.tar.bz2
when i am trying flash the image to sdcard i am geeting error that "linaro-media-create: error: argument --hwpack is required".
So can you help me in flashing the image successfully.
Thanks & Regards
----------------
Rakesh S
EXT: 5378
I have connected a Logitech Webcam Pro 9000 to a PandaBoard
running this release release:
https://android-build.linaro.org/builds/~linaro-android/panda-ics-gcc46-til…
The camera is detected correctly, I see these messages when it's
plugged in.
...
usb 1-1.3: new high-speed USB device number 5 using ehci-omap
usb 1-1.3: New USB device found, idVendor=046d, idProduct=0809
usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=2
usb 1-1.3: SerialNumber: DE0109E6
uvcvideo: Found UVC 1.00 device <unnamed> (046d:0809)
input: UVC Camera (046d:0809) as
/devices/platform/usbhs-omap.0/ehci-omap.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input4
...
When I select the camera app the images are correct:
http://picpaste.com/camera-good.jpg
When I select the video option in the camera app the images are skewed:
http://picpaste.com/video-bad.jpg
Any suggestions?
TIA,
Matt
Hi Team,
I want to test Wi-fi Direct on Pandboard with IceCream Sandwitch android, could you please tell me the steps to be followed in building source with required drivers.
Thanks & Regards
----------------
Rakesh S
EXT: 5378
