linaro-android June 2013

linaro-android@lists.linaro.org

16 participants
22 discussions

Optimizing OVERLAY handling on android-build

by Paul Sokolovsky

Hello, There were increasing Android build times during last month again (going over 3.5hrs). Yesterday, I re-created the seed, but that didn't improve times match. I did more stats on builds and it turns out that we spend almost 1.5hrs in copying ever-growing overlay collection to the slaves via sluggish CopyToSlave Jenkins plugin. That's issues known for at least half-year, and was in queue for being reworked. I didn't work on android-build closely for few months, but now that I'm back on maintenance, I'd like to start with fixing this long-overdue issue. The idea was to pull all the needed overlay, straight to a slave. The complication here was handling of license protected files. ci.linaro.org had the same issue, and used a script to handle automatic downloads for some time. However, as of now, it was switched to other process and the script git bitrotted with recent linaro-license-protection codebase changes. I took a look at revamping it, but then though that it may be a good idea to use simpler and more explicit process, following closely click-thru usage. So, if you want to use a license-protected binaries in a build, you'd need to specify: ACCEPT_LICENSE=<license_id> Where <license_id> is id under which license is registered in linaro-license-protection. One good way to figure it out is to read the license page at all (well, as HTML source, the id is included in some links). Wording of variable name (as well as of commands in underlying implementation) is also explicit to point that its usage construes license acceptance. I prototypes these changes using https://android-build.linaro.org/builds/~pfalcon/panda-jb-gcc47-tilt-tracki… which is down to 2h10m build time. I'm ready to migrate all builds tomorrow, while we're early in cycle start. Please let me know if there're any issues with approach or proposed migration timeframe, otherwise let's make android-build rock again. Thanks, Paul Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog

9 years, 10 months

[ANN] android-build.linaro.org upgrade to Linaro Login Service - complete

by Paul Sokolovsky

Hello, After couple of iterations, android-build.linaro.org was updated to authenticate against Linaro Login system. Please use your login.linaro.org username (with @linaro.org suffix) and password to login from now on. Personal jobs were also renamed to have firstname.lastname prefix instead of Launchpad username. If you cannot see your jobs, please contact me to check their state. Below is interim progress report for completeness. Thanks, Paul Begin forwarded message: Date: Wed, 26 Jun 2013 22:43:07 +0300 From: Paul Sokolovsky <Paul.Sokolovsky(a)linaro.org> To: Paul Sokolovsky <Paul.Sokolovsky(a)linaro.org> Cc: linaro-android <linaro-android(a)lists.linaro.org>, Infrastructure <infrastructure(a)linaro.org>, Linaro Validation <linaro-validation(a)lists.linaro.org>, Philip Colmer <philip.colmer(a)linaro.org> Subject: Re: [ANN] android-build.linaro.org upgrade to Linaro Login Service Hello, On Wed, 26 Jun 2013 15:46:50 +0300 Paul Sokolovsky <Paul.Sokolovsky(a)linaro.org> wrote: > Hello, > > With Android releases out, I'd like to proceed with switchover of > Android Build frontend authenticaton to Linaro Login. Estimated > downtime is 2hrs. To minimize impact, I'm scheduling this for later > evening UTC (around 8pm UTC). Let me know if you need access to a-b > at that time (otherwise, upgrade is OKed by Vishal). Upgrade went well, except that now it's not possible to create personal builds. That's because login username is used to form created job name, and with Linaro Login, username is first.last(a)linaro.org - that's not valid as part of job name, and besides that, it's too long. Even if I adhocly remapped it to first-last, it's still too long, and still would required boring renaming of existing jobs. Atlassian Crowd supports login aliases, Philip mentioned that it's possible to create one, but I skipped doing that just for me, hoping that it would be offered for all folks as part of git migration or something, but that didn't happen. Well, I guess it's time to raise that request now - going submit ITS ticket for this. -- Best Regards, Paul Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog -- Best Regards, Paul Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog

10 years, 10 months

review.android.git.linaro.org

by Philip Colmer

The maintenance on this server has been completed. gerrit has been upgraded so it looks a little bit different now. Also, the sign in process now only works with Linaro Login so clicking on the "sign in" link no longer requires you to paste an OpenID URL. If you are not authenticated with Crowd when you click on the "sign in" link, you will be redirected to Crowd where you need to enter your *email address* and your Linaro Login password. If you have any problems with authentication, please email its(a)linaro.org. Regards Philip

10 years, 10 months

CTS test result on Lava Dashboard For Linaro Android TI-Panda Builds

by Soumya Basak

as observed from Lava Dashboard daily builds of linux- Linaro-android for TI-Panda builds: http://validation.linaro.org/lava-server/dashboard/image-reports/linaro-and… the defined test cases CTS test results: 2749/2942 Passes. from the cts test result bundle observed: http://validation.linaro.org/lava-server/dashboard/streams/private/team/lin… please refer to the logcat and stdout.log for details. Thank You! Best Regards Soumya Basak.

10 years, 10 months

Test Result summary of 13.06 release for Linaro android Jellybean 4.2.2

by Soumya Basak

Linaro-android 13.06 Release (Calendar Week 26 2013): Here is the test result summary for Linaro Android Jellybean 4.2.2 on following boards. [1] TI-Panda 4460; [2] TI-Panda 4430; [3] ST Ericsson Snowball. [4] ARM Versatile Express A9; [5] Galaxy Nexus; [6] Samsung Arndale; [1] TI-Panda 4460 with Linaro Linaro Android Jellybean 4.2.2 (Column: AQ) https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd… toolchain version is upgraded to 4.8-2013.06-0~dev. Please refer to the result spreadsheet for details. [2] TI-Panda 4460 with Linaro Linaro Android Jellybean 4.2.2 (Column: AQ) https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd… [3] ST-Erricsson Snowball with Linaro android Jellybean 4.2.2 (Column: AP) https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadEF1N… toolchain version is upgraded to 4.7-2013.06-1 , please refer to the result spreadsheet for details. [4] ARM Versatile Express A9 with Linaro android Jellybean 4.2.2 (Column: AQ) https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadExQd… toolchain version is: 4.8-2013.06-0~dev, kernel version: 3.10.0-rc6-00192-gb660da8, Please refer to the result spreadsheet for details. [5] Galaxy_nexus with linaro android Jellybean 4.2.2 (Column: C) https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AuNOCeo15fRHdFhhe… [6] Samsung Arndale with Linaro android Jellybean 4.2 (Column: C) https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AuNOCeo15fRHdDFaR… toolchain version : 4.8-2013.06-0~dev. please refer to the result spreadsheet for details. Thank You! Best Regards Soumya Basak.

10 years, 10 months

Planned maintenance for review.android.git.linaro.org, Saturday 29th June

by Philip Colmer

This is to announce a small maintenance window for review.android.git.linaro.org where we will remove support for authentication via Launchpad, and only allow authentication via Linaro Login. As a result, you will not be required to enter the long OpenID URL that you have had to use since we migrated the server. The work will take place during Saturday morning and another email will be sent when the work has been completed. Regards Philip

10 years, 10 months

Settings/Storage doesn't work at all

by piropass＠yahoo.co.jp

Hello everyone, I was installing Android 4.2.2(linaro released) on 8GB SDHC. But, going to "Settings" -> "Storage" crashes the settings application. Could you tell me a method for solving a problem? Best regards, Fugal

10 years, 10 months

Re: Pandaboard ES Audio Support

by Harigopal Gollamudi

Audio out is working through headphones. Where as it is not supported over HDMI. There must be some problem with speaker out socket. Please your board with some other binary just to confirm. https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lin… BR, > > ---------- Forwarded message ---------- > From: Corey Carpenter <fruitwerks(a)gmail.com> > Date: 27 June 2013 08:15 > Subject: Pandaboard ES Audio Support > To: linaro-android(a)lists.linaro.org > > > Hello All, > > I am currently working with > https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lin… > > On Pandaboard ES / 16gb card, 64gb USB Flash > > I have tried many builds before, the last one that worked for me was 12.12 > - this is the first 13.x release I could get to boot. But this is beside > the pint. > > I see that Audio is claimed to be working, but I can't get a peep out of > my board. I have yet to purchase an LVDS screen due to the no-audio blues, > meanwhile I am running to a 720p Samsung TV via primary HDMI. So my > question is, should I be able to get audio out of the headphone jack with > my current configuration? > > Logs show something like this: > > AudioPolicyManager - getOutput() could not find output for stream 1, > samplingRate 44100, format 1, channels 1, flags 4 > > To me this shows the absence of an audio device? I see the Audio row in > the spreadsheet is green, and the HWAUDIO references a bug the explains > audio over HDMI is not working. I hope I am not missing anything... > > From what I gather Audio is working. > Audio over HDMI is not working. > But can I get audio out of the jack while using HDMI, if so how? > > I have had this board for almost a year and would love to get this thing > in my car and stop using my phone as an MP3 player :) > > Thanks! > > -- > > _______________________________________________________________________________ > Any use, dissemination, distribution, posting on Internet bulletin boards, > disclosure or copying of this e-mail or any information contained herein by > or to anyone other than the intended recipient(s) is strictly prohibited. > Use of this content for any other purpose is a violation of International > Copyright Laws. > > _______________________________________________ > linaro-android mailing list > linaro-android(a)lists.linaro.org > http://lists.linaro.org/mailman/listinfo/linaro-android > > > -- Thanks and Regards, HariGopal G Android Engineer

10 years, 10 months

(no subject)

by Harigopal Gollamudi

-- Thanks and Regards, HariGopal G Android Engineer

10 years, 10 months

Pandaboard ES Audio Support

by Corey Carpenter

Hello All, I am currently working with https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lin… On Pandaboard ES / 16gb card, 64gb USB Flash I have tried many builds before, the last one that worked for me was 12.12 - this is the first 13.x release I could get to boot. But this is beside the pint. I see that Audio is claimed to be working, but I can't get a peep out of my board. I have yet to purchase an LVDS screen due to the no-audio blues, meanwhile I am running to a 720p Samsung TV via primary HDMI. So my question is, should I be able to get audio out of the headphone jack with my current configuration? Logs show something like this: AudioPolicyManager - getOutput() could not find output for stream 1, samplingRate 44100, format 1, channels 1, flags 4 To me this shows the absence of an audio device? I see the Audio row in the spreadsheet is green, and the HWAUDIO references a bug the explains audio over HDMI is not working. I hope I am not missing anything... >From what I gather Audio is working. Audio over HDMI is not working. But can I get audio out of the jack while using HDMI, if so how? I have had this board for almost a year and would love to get this thing in my car and stop using my phone as an MP3 player :) Thanks! -- _______________________________________________________________________________ Any use, dissemination, distribution, posting on Internet bulletin boards, disclosure or copying of this e-mail or any information contained herein by or to anyone other than the intended recipient(s) is strictly prohibited. Use of this content for any other purpose is a violation of International Copyright Laws.

10 years, 10 months

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

linaro-android June 2013