Linaro-android August 2013

linaro-android@lists.linaro.org

22 participants
29 discussions

Optimizing OVERLAY handling on android-build

by Paul Sokolovsky

Hello, There were increasing Android build times during last month again (going over 3.5hrs). Yesterday, I re-created the seed, but that didn't improve times match. I did more stats on builds and it turns out that we spend almost 1.5hrs in copying ever-growing overlay collection to the slaves via sluggish CopyToSlave Jenkins plugin. That's issues known for at least half-year, and was in queue for being reworked. I didn't work on android-build closely for few months, but now that I'm back on maintenance, I'd like to start with fixing this long-overdue issue. The idea was to pull all the needed overlay, straight to a slave. The complication here was handling of license protected files. ci.linaro.org had the same issue, and used a script to handle automatic downloads for some time. However, as of now, it was switched to other process and the script git bitrotted with recent linaro-license-protection codebase changes. I took a look at revamping it, but then though that it may be a good idea to use simpler and more explicit process, following closely click-thru usage. So, if you want to use a license-protected binaries in a build, you'd need to specify: ACCEPT_LICENSE=<license_id> Where <license_id> is id under which license is registered in linaro-license-protection. One good way to figure it out is to read the license page at all (well, as HTML source, the id is included in some links). Wording of variable name (as well as of commands in underlying implementation) is also explicit to point that its usage construes license acceptance. I prototypes these changes using https://android-build.linaro.org/builds/~pfalcon/panda-jb-gcc47-tilt-tracki… which is down to 2h10m build time. I'm ready to migrate all builds tomorrow, while we're early in cycle start. Please let me know if there're any issues with approach or proposed migration timeframe, otherwise let's make android-build rock again. Thanks, Paul Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog

11 years, 3 months

CTS test result summary for Calender week 35 Linaro android TI-panda builds

by Soumya Basak

CTS results summary for Calender Week 35: > > Here is the cts test results summary on Lava dashboard Linaro android TI > Panda builds; > > > http://validation.linaro.org/dashboard/image-reports/linaro-android-member-… > > cts test result bundle stream : > > > http://validation.linaro.org/dashboard/streams/private/team/linaro/android-… > > Please refer to the link following link for complete CTS test result > report. > https://docs.google.com/a/linaro.org/file/d/0BwB-fT5LL31CUE5mTkhuY21ydHc/ed… > > > Thank You > Best Regards > Soumya Basak. >

12 years, 1 month

Test Result Summary of Linaro Android Jellybean 13.08 release.

by Soumya Basak

Linaro Android Jellybean 13.08 Release (Calender Week 35): Here is the test result summary for Linaro Android Jellybean images on following boards: [1] TI-Pandaboard 4460; [2] TI-Pandaboard 4430; [3] Samsung Arndale; [4] Galaxy Nexus; [5] ARM Versatile Express A9; [6] ARM Versatile Express TC2; [1] TI-Pandaboard 4460 + Linaro Android Jellybean 4.3 (Column: AY) Result Spreadsheet: https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd… [2] TI-Pandaboard 4430 + Linaro Android Jellybean 4.3 (Column: AY) Result Spreadsheet: https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd… [3] Samsung Arndale + Linaro Android Jellybean 4.3 (Column: I) Result Spreadsheet: https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AuNOCeo15fRHdDFaR… [4] Galaxy Nexus + Linaro Android Jellybean 4.3 (Column: F) Result Spreadsheet: https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AuNOCeo15fRHdFhhe… [5] ARM Versatile Express A9 + Linaro Android Jellybean 4.3 (Column: AX) Result Spreadsheet: https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadExQd… [6] ARM Versatile Express TC2 + Linaro Android Jellybean 4.2.2 (Column: O) Result Spreadsheet: https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadExQd… Please refer to the Result Spreadsheet for details test results. Thank You Best Regards Soumya Basak.

12 years, 1 month

Arndale Android Time Setting & Kernel parameter setting

by Yoshiharu Imamoto

Hi there, I started to develop Linaro Android 13.07 on Arndale Board. It's working fine with HDMI display and mouse input, but I have some issues on it. 1. I cannot change date & time. I tried "Settings -> Date&Time" and "time -s 20130823.130000" command via serial console. But it does not change time on the device. As a result, my application that uses SSL fails to connect to a server since time is set to 1970, which makes certificate validation fail. Does anyone know how to change date & time? 2. I cannot change Linux boot parameter. I want to boot Linux kernel on a single processor hardware, so I'd like to make it No SMP. We can do it by setting "nosmp" argument for kernel boot. I tried changing u-boot parameters mmcargs so that it includes nosmp, but booting kernel seems not to have one. I confirmed it by looking at /proc/cmdline. What parameter on u-boot do I have to change? Thanks, Yoshi

12 years, 1 month

USB camera working in 12.08, but not working in 13.07.

by Megharaj Aralikoppa Gowdaru

*********************** This message has been scanned by the InterScan for CSC SSM and found to be free of known security risks. *********************** Hi all, USB camera was working fine with native camera application in 12.08(ICS), it was also possible to capture image through native camera application. Yes I had made a small change in the code I had changed Android.mk in folder hardware/ti/omap4xxx/camera. The change that i made was as follows. # OMAP4_CAMERA_HAL_USES:= OMX OMAP4_CAMERA_HAL_USES:= USB Now I am trying to do the same in 13.07(Jelly bean), but its not working for me. Is it possible to enable USB camera in android running on pandaboard for version 13.07. Best Regards, A G Megharaj, 8497897771 The information contained in and/or attached to this e-mail is Confidential and proprietary Information of NowOn Technologies Private Limited (NowOn). This information is intended only for the confidential use of the addressees named therein and hence any review, dissemination, distribution or copying of this message shall be subject to the confidentiality obligations. If this message has reached a person or persons other than the addressees, it is hereby notified that such person(s) have received this document in error and it is obligatory to notify NowOn immediately by reply e-mail and delete the original message together with any and all attachments.

12 years, 1 month

Android Config fragment update

by Vishal Bhoj

Hi John, Should we update our existing Android config fragment to what google recommends ? Atleast the base config as per google's documentation: http://source.android.com/devices/tech/kernel.html I see that one of the Landing team kernel which is derived from linux-linaro builds with our android config fragment but fails to compile with the one mentioned in above link. Regards, Vishal

12 years, 1 month

having problem in building android for pandaboard version 13.06.

by Megharaj Aralikoppa Gowdaru

*********************** This message has been scanned by the InterScan for CSC SSM and found to be free of known security risks. *********************** I have downloaded the 13.06 version android for pandaboard.This is how I am downloading and building. chmod +x linaro_android_build_cmds.sh ./linaro_android_build_cmds.sh -t once downloaded. . build/envsetup.sh make -j4 boottarball systemtarball userdatatarball I am attaching the log file please do let me know the reason. Best Regards, A G Megharaj, 8497897771 The information contained in and/or attached to this e-mail is Confidential and proprietary Information of NowOn Technologies Private Limited (NowOn). This information is intended only for the confidential use of the addressees named therein and hence any review, dissemination, distribution or copying of this message shall be subject to the confidentiality obligations. If this message has reached a person or persons other than the addressees, it is hereby notified that such person(s) have received this document in error and it is obligatory to notify NowOn immediately by reply e-mail and delete the original message together with any and all attachments.

12 years, 1 month

hi maybe you can help me

by me

I dont know if you are the right people/ person to ask. i appologize if you are not. I have a google nexus . i have either soft or hardbricked it. I think i probably deleted the bootloader on it. It just hangs on the google loading screen. It is not in fastboot or adb mode. nexus root toolkit google nexus toolkit and odin cant locate it. I run linux mint 15 (ubuntu 12.04) and have begun to develop a working knowledge of udev lspci etc. . I have a maguro bootloader image (bootloader- maguro-primelc03_4.2.2img) but i haven't been able to find a delivery system, if indeed that is the problem. It seems like linaro-android-media-create might do the job but i am quite nervous about doing more damage. thank you for your time

12 years, 1 month

android-4.3_r2.2

by Bernhard Rosenkränzer

Hi, AOSP has tagged android-4.3_r2.2... Not too many useful things in there, changes are limited to: platform/build: simply increase build number platform/frameworks/base: Avoid class preloading (should be a minor speedup) platform/libcore: Avoid class preloading (should be a minor speedup) platform/packages/apps/Settings: Fix in Reset app preferences device/asus/deb: Operator provisioning bits (Verizon, AT&T) device/asus/flo: fstab updates: nomblk_io_submit,errors=panic device/asus/flo-kernel: binary synced with recent commits device/lge/mako-kernel: binary synced with recent commits platform/external/apache-http: Avoid class preloading platform/prebuilts/sdk: Official release of SDK 18 There are no conflicts with anything we're doing, so the rebase can be done in a few minutes. ttyl bero

12 years, 1 month

having problem in building android for pandaboard version 13.06.

by Megharaj Aralikoppa Gowdaru

*********************** This message has been scanned by the InterScan for CSC SSM and found to be free of known security risks. *********************** I have downloaded the 13.06 version android for pandaboard.This is how I am downloading and building. chmod +x linaro_android_build_cmds.sh ./linaro_android_build_cmds.sh -t once downloaded. . build/envsetup.sh make TARGET_PRODUCT=pandaboard TARGET_TOOLS_PREFIX=/home/nowon/Workspace/Android_toolchain/linaro-4.7-201207/android-toolchain-eabi/bin/arm-linux-androideabi- boottarball systemtarball userdatatarball boottarball got generated after some time got the error as shown in the above attached file. Please do let me know the reason, that would be very helpful Best Regards, A G Megharaj, 8497897771 The information contained in and/or attached to this e-mail is Confidential and proprietary Information of NowOn Technologies Private Limited (NowOn). This information is intended only for the confidential use of the addressees named therein and hence any review, dissemination, distribution or copying of this message shall be subject to the confidentiality obligations. If this message has reached a person or persons other than the addressees, it is hereby notified that such person(s) have received this document in error and it is obligatory to notify NowOn immediately by reply e-mail and delete the original message together with any and all attachments.

12 years, 1 month

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Linaro-android August 2013