Linaro-android

linaro-android@lists.linaro.org

2 participants
1072 discussions

Android-build slaves are upgraded to Ubuntu 14.04 LTS

by Paul Sokolovsky

Hello, Sorry this should have gone early next week, but was delayed due to issues discovered, and then backlogged due to other tasks. Anyway, android-build.linaro.org build slaves were upgraded to Ubuntu 14.04 (from 12.04) on Friday Nov 14th, followed Vishal's approval. The were some issues with restricted builds, which were resolved during last week. Public build didn't experienced any problems. If you see any issues though (like missing packages), let us (Systems) know, preferrably via bugtracker: https://bugs.linaro.org/enter_bug.cgi?product=Linaro%20CI -- Best Regards, Paul Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog

10 years, 1 month

Linaro Android Source Code for Pandaboard REV B3

by monica.villegas＠coffee-electronics.com

Hi, i'm Michelle Villegas, i wanted to ask you if you could help me on telling me which one is the source code of Android Linaro that works for Pandaboard Rev B3 to build it from scratch. We would appreciate your help. Thanks in advanced. Best Regards. --- --- --- --- Mónica Michelle Villegas Arias Electronics Engineer Drivers Development Department Coffee Electronics (Pte. Ltd.) Calle 15, 10 Norte # 11, Edificio Belmonte, Apartamento 503. Armenia, Quindio, Colombia (South-America) Company Registration Number: 201202968W monica.villegas(a)coffee-electronics.com --- --- --- --- CONFIDENTIALITY NOTICE: This e-mail and any attachments thereto may contain private, confidential, and privileged material for the sole use of the intended recipient. If you are not the intended recipient, any dissemination, distribution or copying is strictly prohibited. If you think that you have received this e-mail message in error, please contact the sender immediately and permanently delete the original and any copies of this e-mail and any attachments thereto.

10 years, 1 month

android-5.0.0_r5 tagged

by Bernhard Rosenkränzer

Also, official 5.0 images for Nexus 5, 7 and 10 are released (probably that's what _r3, _r4 and _r5 were tagged for). Time to have some more fun updating ;) ttyl bero

10 years, 1 month

Enabling back linker plugin for Linaro Android toolchain

by 박주형

I'm using Linaro Android toolchain's arm-eabi- for compiling my Android Linux kernel with LTO. The main benefits of my kernel is that it uses LTO(Link-Time-Optimizations). (Patches found here: https://github.com/andikleen/linux-misc) But now, it's broken with Linaro Android toolchains from 2014.09~ Building Linux kernel with LTO requires Linker plugin with the toolchain. But for some reason, linker plugin is disabled with 2014.09 and 2014.10 (Which I used from here : https://android-build.linaro.org/builds/~linaro-android/toolchain-4.9-2014.… https://android-build.linaro.org/builds/~linaro-android/toolchain-4.9-2014.… ) LTO build works flawlessly with 2014.08. With 2014.09 and 2014.10, I get the following error : cc1: error: -fno-fat-lto-objects are supported only with linker plugin If I explicitly remove " -fno-fat-lto-objects " from the Makefile, the linker fails to link all of the object files. I would like to ask Linaro to enable back the Linker plugin support :) Thanks in advance..

10 years, 2 months

pandaboard ES binary install

by Tony Jones

Hi. I'm trying to install on a Pandaboard ES following these instructions: https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lin… I've tried the 812 and 815 builds, also tried "--align-boot-part" but each time there appears to be a bootloader issue, diag light stays solid green and no output on serial console. I can install the TI validation image onto the same 8GB sdcard and it boots fine. Typescript of the install: http://pastebin.com/qqYXbqNT There are some cylinder warnings which I'm not sure are relevant. The instructions mention "Using the Prebuilt image. Download the pandaboard.img.bz2 and flash it.". I assume as an alternative to the above but I couldn't see where this image is available for download? thanks!

10 years, 2 months

Disk space upgrade on android-build

by Paul Sokolovsky

Hello, It turns that my disk usage analysis earlier this year was too optimistic, and with Project Ara and other builds added, we ran out of space much quicker than in a year. Even clean up of the older jobs didn't help, so I'd like to proceed with disk space upgrade (say, to 800Gb from current 500Gb). I'd like to schedule this for weekend, when, I hope, all release builds will be done. Let me know if there're any concerns. Thanks, Paul Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog

10 years, 2 months

ARMv8: Android: Failed to disable suspend

by Naresh Kamboju

Hi Android team, Any comments on this bug are welcome. ARMv8: Android: Failed to disable suspend: The home screen was not displayed https://bugs.linaro.org/show_bug.cgi?id=188 Best regards Naresh Kamboju

10 years, 3 months

kernel crush because of CONFIG_PREEMPT

by Zhizhou Zhang (张治洲)

Hello Guys, I'm using branch linux-linaro-lsk-android on lsk(https://git.linaro.org/kernel/linux-linaro-stable.git). My arch is armv8. When I config CONFIG_PREEMPT, The system panic. It says "Failed to execute /init". I digged into it and found there was a page fault in atomic path. And When config CONFIG_PREEMPT_VOLUNTARY or CONFIG_PREEMPT_NONE, it looks well. Does anyone encounter this situation? -- Zhizhou

10 years, 3 months

vexpress-lsk-3.14 still uses 3.10.55 kernel?

by Daniel Thompson

Hello I've been running the vexpress images in qemu in preparation for some work on Android's ADF. I've been using the vexpress-lsk-3.14 images. They work OK but seem to be based on the 3.10 kernel. I started out using the 14.09 release versions but the problem also seems to be apparent in the overnight builds: http://snapshots.linaro.org/android/~linaro-android/vexpress-lsk-3.14/70/ke… Is this a known issue? Daniel.

10 years, 3 months

Isssue related to new panda board A6.

by Mariusz Boguszewski

Hello. I would like to ask for a details of how you create your panda board image ? Especially how the kernel image uImage is created ? My problem starts with new Panada board A6, for which standard flashing procedure does not work. I use official release of Android with few corrections. I tried to load your panda board image on SD card and it failed too at the bootloader. After getting some advice from U-boot team I managed to enable automatic SDRAM clock and build modified version of it. After coping those new u-boot to SD card, system works. My issue is now how to load my standard Android system. I tried to load Android code from your website: https://wiki.linaro.org/Platform/Android/GetSource, but I was stopped by the error: mb56@mb56ubuntu:~/oper/data/android$ ./repo init -u ${MANIFEST_REPO} -b ${MANIFEST_BRANCH} -m ${MANIFEST_FILENAME} -g ${REPO_GROUPS} ./repo: line 1: syntax error near unexpected token `newline' ./repo: line 1: `<!DOCTYPE html>' Reagrads, Mariusz. Member of the CSR plc group of companies. CSR plc registered in England and Wales, registered number 4187346, registered office Churchill House, Cambridge Business Park, Cowley Road, Cambridge, CB4 0WZ, United Kingdom More information can be found at www.csr.com. Keep up to date with CSR on our technical blog, www.csr.com/blog, CSR people blog, www.csr.com/people, YouTube, www.youtube.com/user/CSRplc, Facebook, www.facebook.com/pages/CSR/191038434253534, or follow us on Twitter at www.twitter.com/CSR_plc. New for 2014, you can now access the wide range of products powered by aptX at www.aptx.com.

10 years, 3 months

← Newer
1
...
8
9
10
11
12
13
14
...
108
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Linaro-android