***********************
This message has been scanned by the InterScan for CSC SSM and found to be free of known security risks.
***********************
Hi all,
USB camera was working fine with native camera application in 12.08(ICS), it was also possible to capture image through native camera application.
Yes I had made a small change in the code I had changed Android.mk in folder hardware/ti/omap4xxx/camera. The change that i made was as follows.
# OMAP4_CAMERA_HAL_USES:= OMX
OMAP4_CAMERA_HAL_USES:= USB
Now I am trying to do the same in 13.07(Jelly bean), but its not working for me.
Is it possible to enable USB camera in android running on pandaboard for version 13.07.
Best Regards,
A G Megharaj,
8497897771
The information contained in and/or attached to this e-mail is Confidential and proprietary Information of NowOn Technologies Private Limited (NowOn). This information is intended only for the confidential use of the addressees named therein and hence any review, dissemination, distribution or copying of this message shall be subject to the confidentiality obligations. If this message has reached a person or persons other than the addressees, it is hereby notified that such person(s) have received this document in error and it is obligatory to notify NowOn immediately by reply e-mail and delete the original message together with any and all attachments.
Hi John,
Should we update our existing Android config fragment to what google
recommends ? Atleast the base config as per google's documentation:
http://source.android.com/devices/tech/kernel.html
I see that one of the Landing team kernel which is derived from
linux-linaro builds with our android config fragment but fails to compile
with the one mentioned in above link.
Regards,
Vishal
***********************
This message has been scanned by the InterScan for CSC SSM and found to be free of known security risks.
***********************
I have downloaded the 13.06 version android for pandaboard.This is how I am downloading and building.
chmod +x linaro_android_build_cmds.sh
./linaro_android_build_cmds.sh -t
once downloaded.
. build/envsetup.sh
make -j4 boottarball systemtarball userdatatarball
I am attaching the log file please do let me know the reason.
Best Regards,
A G Megharaj,
8497897771
The information contained in and/or attached to this e-mail is Confidential and proprietary Information of NowOn Technologies Private Limited (NowOn). This information is intended only for the confidential use of the addressees named therein and hence any review, dissemination, distribution or copying of this message shall be subject to the confidentiality obligations. If this message has reached a person or persons other than the addressees, it is hereby notified that such person(s) have received this document in error and it is obligatory to notify NowOn immediately by reply e-mail and delete the original message together with any and all attachments.
I dont know if you are the right people/ person to ask. i appologize if you
are not.
I have a google nexus . i have either soft or hardbricked it.
I think i probably deleted the bootloader on it.
It just hangs on the google loading screen. It is not in fastboot or adb mode.
nexus root toolkit google nexus toolkit and odin cant locate it.
I run linux mint 15 (ubuntu 12.04) and have begun to develop a working
knowledge of udev lspci etc. . I have a maguro bootloader image (bootloader-
maguro-primelc03_4.2.2img) but i haven't been able to find a delivery system,
if indeed that is the problem.
It seems like linaro-android-media-create might do the job but i am quite
nervous about doing more damage.
thank you for your time
Hi,
AOSP has tagged android-4.3_r2.2...
Not too many useful things in there, changes are limited to:
platform/build:
simply increase build number
platform/frameworks/base:
Avoid class preloading (should be a minor speedup)
platform/libcore:
Avoid class preloading (should be a minor speedup)
platform/packages/apps/Settings:
Fix in Reset app preferences
device/asus/deb:
Operator provisioning bits (Verizon, AT&T)
device/asus/flo:
fstab updates: nomblk_io_submit,errors=panic
device/asus/flo-kernel:
binary synced with recent commits
device/lge/mako-kernel:
binary synced with recent commits
platform/external/apache-http:
Avoid class preloading
platform/prebuilts/sdk:
Official release of SDK 18
There are no conflicts with anything we're doing, so the rebase can be done
in a few minutes.
ttyl
bero
***********************
This message has been scanned by the InterScan for CSC SSM and found to be free of known security risks.
***********************
I have downloaded the 13.06 version android for pandaboard.This is how I am downloading and building.
chmod +x linaro_android_build_cmds.sh
./linaro_android_build_cmds.sh -t
once downloaded.
. build/envsetup.sh
make TARGET_PRODUCT=pandaboard TARGET_TOOLS_PREFIX=/home/nowon/Workspace/Android_toolchain/linaro-4.7-201207/android-toolchain-eabi/bin/arm-linux-androideabi- boottarball systemtarball userdatatarball
boottarball got generated after some time got the error as shown in the above attached file.
Please do let me know the reason, that would be very helpful
Best Regards,
A G Megharaj,
8497897771
The information contained in and/or attached to this e-mail is Confidential and proprietary Information of NowOn Technologies Private Limited (NowOn). This information is intended only for the confidential use of the addressees named therein and hence any review, dissemination, distribution or copying of this message shall be subject to the confidentiality obligations. If this message has reached a person or persons other than the addressees, it is hereby notified that such person(s) have received this document in error and it is obligatory to notify NowOn immediately by reply e-mail and delete the original message together with any and all attachments.
Dear Linaro-Team,
I'm new to Android and I followed your steps on this site:
https://android-build.linaro.org/builds/~linaro-android-archive/vexpress
-ics-gcc47-armlt-tracking-open/
But now I ran into an error where I can't find more info on the
Internet.
When building with the Command "make ....", I get the following error:
In file included from kernel/tools/gator/daemon/Hwmon.h:12:0,
from kernel/tools/gator/daemon/SessionData.h:15,
from kernel/tools/gator/daemon/StreamlineSetup.cpp:18:
kernel/tools/gator/daemon/Driver.h:32:15: warning: unused parameter
'root' [-Wunused-parameter]
target thumb C: gatord <=
kernel/tools/gator/daemon/libsensors/conf-lex.c
target thumb C: gatord <=
kernel/tools/gator/daemon/libsensors/conf-parse.c
lib/conf-lex.l:38:1: internal compiler error: in get_variable_section,
at varasm.c:1017
Please submit a full bug report,
with preprocessed source if appropriate.
See <http://gcc.gnu.org/bugs.html> for instructions.
target thumb C: gatord <= kernel/tools/gator/daemon/libsensors/data.c
make: ***
[out/target/product/pandaboard/obj/EXECUTABLES/gatord_intermediates/libs
ensors/conf-lex.o] Error 1
make: *** Waiting for unfinished jobs....
Do you have any ideas?
I thank you in advance.
Yours sincerely
Daniel Enderle
Softwareentwicklung
------------------------------------------------------------------------
/// ACD Elektronik GmbH
Engelberg 2
88480 Achstetten
Tel.: (+49) 7392 / 708 - 477
Fax: (+49) 7392 / 708 - 58 477
Mail: daniel.enderle(a)acd-elektronik.de
<mailto:daniel.enderle@acd-elektronik.de>
Web: www.acd-elektronik.de <http://www.acd-elektronik.de/>
ACD Elektronik GmbH * Sitz: 88480 Achstetten * Amtsgericht: Ulm HRB 640242
Geschaeftsfuehrer: Johann Bolkart, Fritz Guther, Andreas Zwissler * WEEE-Reg.-Nr. DE 53473276
Hello,
On Fri, prompted by this request from Bero:
https://bugs.launchpad.net/linaro-android-infrastructure/+bug/1212474 I
tried tor add SVN to our existing build image, but it failed because
Natty on which it's based is not supported for quite some time and
lately its package archives were cleared off from EC2 mirror. So, I had
little reasonable choice but to try to create new Precise image and go
with testing that. After late Friday and weekend testing, it's clear
that it can build Android successfully, though quite a few builds are
currently broken - though I doubt that can be attributed to Precise
switch. But let me know if it's related or there're other issues.
--
Best Regards,
Paul
Linaro.org | Open source software for ARM SoCs
Follow Linaro: http://www.facebook.com/pages/Linarohttp://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog