Linaro-android

linaro-android@lists.linaro.org

1073 discussions

Re: ADB over Ethernet is a potential issue in CTS test.

by Naresh Kamboju

+linaro.android +vishal On 21 February 2013 16:39, Botao Sun <botao.sun(a)linaro.org> wrote: > Hi Amit & Soumya, > > Perhaps you have realised this issue, which means if our test target only > supports ADB over Ethernet, then some CTS test cases won't be executed if > they require a system reboot. > > As we know, in order to enable ADB over Ethernet, we need to do following > 3 steps on our test target: > > stop adbd > setprop service.adb.tcp.port 6565 > start adbd > > Some CTS test (for example, "Android" test suite), will reboot system > before being performed. Since the variable settings above will be lost > after powered off, then after system rebooted, ADB over Ethernet connection > will be lost. I tried this on vexpress A9 board and found many test cases > couldn't be run just because the ADB connection failed after rebooting. > > Therefore, when run CTS, the test target should support ADB over USB > connection, then can ensure everything goes well. > > I think we have way to solutions to fix adb issue on TCP connection as well. workload automation runs on vexpress+TC2 which use ADB connection over TCP. Vishal has already have a solution for this problem. Best regards Naresh Kamboju > Thanks. > > > Best Regards > Botao Sun >

12 years, 6 months

Test result summary Calender week 8 Linaro android jellybean 4.2

by Soumya Basak

Here is test result summary for Calender week 8 Linaro android jellybean 4.2 [1] TI panda 4430 [2] TI panda 4460 [3] ST-Snowball [4] ARM-Vexpress A9 synopsis: on panda 4430 and 4460 it keeps exactly the same result from the Last week build test. the toolchain version of panda build is being upgraded , ST-snowball Linaro-android is upgraded to 4.2.2 and it keeps exactly same result from last builds. ARM vexpress A9 with Linaro android the kernel version and toolchain version is being upgraded, sd-mmc partition is detected. other than it keeps the same result from the past builds. [1]TI-Panda 4430 with Linaro android 4.2.1(column: AD) https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd… Toolchain version is upgraded to 4.7-2013.02, graphics on HDMI is inverted, suspend-resume test doesnot work, hardware-graphics establishment missing, wifi and BT does not work, DS-5 is working. Please see the spreadsheet for details test and bug report. [2]TI-Panda 4460 with Linaro android 4.2.1(column: AF) https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd… Toolchain version is upgraded to 4.7-2013.02, graphics on HDMI is inverted, suspend-resume test doesnot work, hardware-graphics establishment missing, wifi and BT does not work, DS-5 is working. other than it keeps exactly same result from last week builds. Please see the spreadsheet details tests and bug report. [3] ST-Snowball with Linaro-android 4.2.2(column: Z) https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadEF1N… ST-snowball toolchain version is upgraded to 4.7-2013.02 with Linaro android jellybean version is upgraded to 4.2.2. other than this it keeps exactly the same result from last week build test, playback of video is failed, powertop adb is working as well. suspend resume is not working. Please check on spreadsheet for test result and bug reports. [4] ARM vexpress A9 with Linaro android jelly bean (column: AA) https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadExQd… kernel version is upgraded to 3.8.0-rc7-00873-g35e4315, and toolchain version is also upgraded 4.7-2013.02, other than this it keeps exactly the same result from last week test, sd card partition is mount, suspend-resume test failed, adb ethernet does not work. please check on the spread sheet for test result and bug report. Thanking you Soumya Basak

12 years, 6 months

Virtualize Linaro Android on the ARM chromebook on top of Linaro ubuntu.

by Mario

Hello to everybody. Some time ago I bought the Samsung XE303C12-A01US Chromebook. I love it. Let me explain what’s my project with it. I want to virtualize LInaro android on top of Linaro Ubuntu because I would like to use them simultaneously. I know that a lot of developers are doing the inverse way,they run ubuntu on top of android,but I dislike this way because I think that Linux is better (more secure,powerful,complete) than Android. I want to start this project not for commercial reasons,but only for my pleasure. I’m not very experienced in programming,but I like the computer’s world,so I’ve studied a little which kind of scenarios we may have. To accomplish this project we could follow more ways : 1) to use LXC (linux containers) and build a chroot jail and virtualize Linaro android inside it. 2) to use XEN for ARM. In this case I need to use at least kernel 3.7 for ubuntu because the XEN supports starts from this kernel version. 3) to use QEMU+KVM,emulating Android for ARM and not Android X86. 4) to use XVISOR hypervisor 5) to use CODEZERO embedded hypervisor Since as I said I’m not experienced,I would like that someone explains to me which way is easier and which kind of problems there could be. And since I will be not never able to finish this job by myself only,I could hire a developer. I'm a student and I have not a big amount of money to offer,so I hope to find a developer who wants to help me not only for money,but also because he wants to get the challenge. Let me know. Thanks. -- Mario.

12 years, 6 months

Agenda posted for Android Platform/Mobile Development Meeting

by Vishal Bhoj

Hi, The agenda has been posted for today's meeting: https://wiki.linaro.org/Platform/Android/Meetings/2013-02-20 The same agenda is also posted in the doc: https://docs.google.com/a/linaro.org/document/d/1nuqwjLy_Bc3zrRYWOgMBzc4sny… Regards, Vishal

12 years, 6 months

Re: Weekly email

by Dmitry Antipov

On 02/18/2013 06:49 AM, Zach Pfeffer wrote: > Hope everything is good. Everything needs to be in the build by > Thursday. Would you mind updating your BPs to reflect reality? Updated. BTW, in juice-aosp #121, CONFIG_SYNC and so CONFIG_SW_SYNC aren't enabled in the kernel; this means that there is no /dev/sw_sync and sync unit test will not work. Dmitry

12 years, 6 months

Graphic libraries

by Laco Skokan

Hello, I am trying to install latest prebuild Android to pandaboard and I can't download libraries. This is not accessible: https://dl.google.com/dl/android/aosp/imgtec-panda-imm76i-67545da7.tgz Can you advice me where it get it from? Thank you, Ladislav.

12 years, 6 months

TC2 big-LITTLE-MP-master-v14 boot failed with 13_01 Android image

by Eric Huang

Hi, I am trying to build the kernel directly from big-LITTLE-MP-master-v14 (from http://git.linaro.org/gitweb?p=arm/big.LITTLE/mp.git;a=summary). And the kernel built from it can't seem to detect SD card. Before I spent time on this, I'd like to know whether there is any known issues here, since I am pretty with the TC2 platform. I have a TC2 with V5.0. I can get Android running with prebuilt Android image and kernel (With much help from Jon Medhurst). I then proceeded to replace the pthe kernel with a build from the big-LITTLE-MP-master-v14. I used the config file mentioned in linaro_kernel_build_cmds.sh (curl -q http://snapshots.linaro.org/android/~linaro-android/vexpress-linaro-mp-13.0…> linaro_kernel_config). The build is successful, and I then replaced the /media/boot/uImage with the new uImage. But the boot failed to detect SD card and can't boot Android up. >From 13_01's release note," big-LITTLE-MP-master-v14 that has been used for the 13.01 evaluation build ", so why replacing the released kernel build with my build doesn't work? Maybe I am missing something here? Eric Huang

12 years, 6 months

Demo Friday Information

by Amber Graner

Hi all, Here is the link to the information for Demo Friday. http://www.linaro.org/connect/demo-friday There are links to all the information along with the templates for the posters. Please let me know if you all have any questions. Thanks, ~Amber -- Amber Graner Community and Social Media Manager Linaro.org <http://www.linaro.org/>* **│ *Open source software for ARM SoCs* *** Follow *Linaro: *Facebook <http://www.facebook.com/pages/Linaro> | Twitter<http://twitter.com/#%21/linaroorg> | Blog <http://www.linaro.org/linaro-blog/> *+1.828.582.9469* cell *+1.828.395.1049* office irc: akgraner amber.graner(a)linaro.org (email and Google chat)

12 years, 7 months

Re: Pandaboard 4430 Android 13.01 issue

by Zach Pfeffer

Hey Paul, Adding linaro-android Which particular build are you trying? On 14 February 2013 12:01, Chin, Paul <paul.chin(a)bankofamerica.com> wrote: > Hi Zach: > > > > I am trying to install android 13.01 on a Pandaboard 4430 which ran > Ubuntu 12.10 without any issue. I am able > > to flash and run Linaro android prebuilt img without issue up to 12.07, > after 12.08 onward I am only getting a > > black screen. I am using a hdmi-dvi cable on the dvi port. Should I be using > the hdmi port instead? > > > > I am using prebuilt img file to flash the sdcard using a windows 7 box. > > > > Thanks. > > > > Paul Chin > > > > ________________________________ > This message, and any attachments, is for the intended recipient(s) only, > may contain information that is privileged, confidential and/or proprietary > and subject to important terms and conditions available at > http://www.bankofamerica.com/emaildisclaimer. If you are not the intended > recipient, please delete this message. -- Zach Pfeffer Android Platform Team Lead, Linaro Platform Teams Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog

12 years, 7 months

test result summary Linaro android for Calender week-6

by Soumya Basak

Here is test result summary for Linaro android for the following board. [1] Ti-Panda 4430 [2] Ti-Panda 4460 [3] ST-snowball [4] Arm vexpress-A9 Synopsis: All boards keep exactly same status as last week, panda with Linaro android jellyben Display on HDMI is skewed and colour is distorted, otherthan exactly keep the same result as last week test. ST snowball is exactly same result as last build Arm Vexpress-A9 sd-mmc bug is fixed, toolchain version is changed to 3.8.0-rc6-00862-g5d25da8, other than keep exactly same result from the last build. [1] Ti-Panda4430 + linaro android jb (column-AC) https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd… it keeps exactly same result from last build test. Display on Hdmi colour is inverted and skewed. youtube is normally working but highquality Video playback failed. sd-mmc, gallery bug is fixed. [2] Ti-Panda4460 + Linaro android jb (Column: AE) https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd… it keeps exactly same result as last build test. Display on Hdmi colour is inverted and skewed. youtube is normally working but highquality Video playback failed. sd-mmc, gallery bug is fixed. [3] ST snowball + Linaro android jb (Column: Y) https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadEF1N… ST Ericsson Snowball with Linaro android jb builds toolchain version is changed to Liaro GCC 4.7-2013.01-1~dev, other than it keeps exactly the same result from the last build test. sd-mmc, vid-playback is failed, youtube is not working, look at the spreadsheet and bug report for more details. [4]Arm Vexpress-A9 + Linaro android jb (Column: Z) https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadExQd… Arm Vexpress-A9 with Linaro android the kernel version is changed to 3.8.0-rc6-00862-g5d25da8 and the toolchain version is changed to 4.7-2013.01-1~dev. sd-mmc bug is fixed, multimedia files is shown from gallery, other than that it keep exactly the same result from last build. suspend-resume failed, adb test is failed, device tree is not present. Please look at the spreadsheet for details. Thanks & Regards Soumya Basak.

12 years, 7 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Linaro-android