23 Aug
2012
23 Aug
'12
3:20 p.m.
Vishal,
On Thu, Aug 23, 2012 at 10:49 AM, Vishal Bhoj vishal.bhoj@linaro.org wrote:
Can you check if the prebuild MLO and u-boot are getting used ? Can you compare the checksum for the MLO and u-boot in the generated boottarball and the one in device/ti/panda . They should match.
They match (also cross-checked with boot.tar.bz2 from https://android-build.linaro.org/builds/~linaro-android/panda-master-gcc44-a...).
Also can you share the complete boot log from serial console from xloader and u-boot and the kernel.
I've attached the log from the working kernel (i.e. CONFIG_ALIGNMENT_TRAP=n) as alignment_trap_fix.log and the non-working version as crashing.log
-Aaron