On 25 August 2012 04:25, Zach Pfeffer zach.pfeffer@linaro.org wrote:
Modified instructions:
Download startupfiles_3.0.8-0.tar.gz from http://www.igloocommunity.org/download/linaro/startupfiles/latest
tar -xvf startupfiles_3.0.8-0.tar.gz
sudo ./linaro-image-tools/linaro-android-media-create --image-file snowball-image --image-size 1500M --dev snowball_emmc --system system.tar.bz2 --userdata userdata.tar.bz2 --boot boot.tar.bz2
sudo add-apt-repository ppa:igloocommunity-maintainers/snowball-tools sudo apt-get update sudo apt-get install riff # remove PPA (optional) sudo add-apt-repository --remove ppa:igloocommunity-maintainers/snowball-tools # Turn off device sudo riff -f snowball-image # Connect your board using the OTG USB port(next to power supply port) to your PC. # Turn on device # Riff will detect the board and start the execution.
# When execution is finalized riff will exit.
I have updated the build with your instructions, but I'm not sure about the startup files. I can't remember that I updated them. I will check with with igloo guys.
/Patrik
Mathieu have you seen this riff issue? Patrik, it looks like there were some instructions missing with getting riff, I've filled in based on the older instructions, but am I missing anything else?