Hi, All
Maybe we can make lava use the boot loader of the test build to boot the test images, so that there will be no such inconsistency that "lava can boot but the image can not" or "lava can not boot but the image can boot"
Here is branch that I have tested on panda stable and aosp build: the https://code.launchpad.net/~liuyq0307/lava-dispatcher/test-bootloader/+merge...
Thanks, Yongqin Liu
On 4 September 2012 23:24, Zach Pfeffer zach.pfeffer@linaro.org wrote:
On 4 September 2012 10:23, Vishal Bhoj vishal.bhoj@linaro.org wrote:
The landing team has fixed the issue. The status has been updated in the bug : https://bugs.launchpad.net/linaro-android/+bug/1045244
Awesome. :) Thanks for the update Vishal.
On 4 September 2012 20:51, Zach Pfeffer zach.pfeffer@linaro.org wrote:
Fahad,
Would you file a bug on this issue for tracking and verify that the tip build now works from,
https://android-build.linaro.org/builds/~linaro-android/origen-jb-gcc47-sams...
?
On 4 September 2012 10:13, John Rigby john.rigby@linaro.org wrote:
U-boot mmc for origen was broken in 2012.08.2 then fixed by applying a couple of reverts in 2012.08.3. The master branch was updated one week ago however the new tag was not applied until later in the week on Thursday.
--john
On Mon, Sep 3, 2012 at 3:16 PM, Alexander Sack alexander.sack@linaro.org wrote:
Can we try same image with the LAVA bootloader version to confirm that it's a bootloader thing? Also CCed jcriby for bootloader support.
Check with Dave in case we can't find the bootloader installed in LAVA case.
On Sep 3, 2012 10:50 PM, "Zach Pfeffer" zach.pfeffer@linaro.org wrote:
On 3 September 2012 05:41, Botao Sun botao.sun@linaro.org wrote: > + Zach > > Sorry, I mean another Amit, Mr. Amit Pundir, he's working on Samsung > related > stuff I remembered. > > Also, here is more information, I have tried several previous image, > the > last good one is build 47: > > > > https://android-build.linaro.org/builds/~linaro-android/origen-jb-gcc47-sams... > > Therefore, I'm going to use this one as our weekly test target. > However, > please dig more on why build 48, 49 & 50 failed - bad thing started > at > build > 48. > > Thank you!
Botao,
Just had a second to look at this, I see:
U-Boot 2012.07-00053-gbf30cf4 (Sep 03 2012 - 07:03:03) for ORIGEN
CPU: Exynos4210@1000MHz
Board: ORIGEN DRAM: 1 GiB WARNING: Caches not enabled MMC: SAMSUNG SDHCI: 0 Timeout for status update! mmc fail to send stop cmd Using default environment
In: serial Out: serial Err: serial Hit any key to stop autoboot: 0 reading boot.scr
397 bytes read Running bootscript from mmc0:2 ... ## Executing script at 42000000 reading uImage Timeout for status update! mmc fail to send stop cmd Timeout for status update! mmc fail to send stop cmd Timeout for status update! mmc fail to send stop cmd Timeout for status update! mmc fail to send stop cmd Timeout for status update! mmc fail to send stop cmd Timeout for status update! mmc fail to send stop cmd Timeout for status update! mmc fail to send stop cmd Timeout for status update! mmc fail to send stop cmd Timeout for status update! mmc fail to send stop cmd Timeout for status update! mmc fail to send stop cmd Timeout for status update! mmc fail to send stop cmd Transfer data timeout Error reading cluster
** Unable to read "uImage" from mmc 0:2 ** ** Can't read partition table on 0:0 ** ** Partition 2 not valid on device 0 **
** Unable to use mmc 0:2 for fatload ** ## Booting kernel from Legacy Image at 40007000 ... Image Name: Linux-3.4.8 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3879160 Bytes = 3.7 MiB Load Address: 40008000 Entry Point: 40008000 Verifying Checksum ... Bad Data CRC ERROR: can't get kernel image! ORIGEN #
on,
https://android-build.linaro.org/builds/~linaro-android/origen-jb-gcc47-sams...
This would explain why it works in LAVA (since LAVA doesn't update the bootloader) but it doesn't work locally (since we do update the bootloader). Is this what you see?
> > > BR > Botao Sun > > On Mon, Sep 3, 2012 at 8:25 PM, amit khare amit.khare@linaro.org > wrote: >> >> on it.... >> >> Regards, >> Amit >> >> >> On 3 September 2012 15:21, Botao Sun botao.sun@linaro.org wrote: >>> >>> Hi Amit, >>> >>> Would you take a look at this issue? >>> >>> Origen Jelly Bean boot failed.: >>> https://bugs.launchpad.net/linaro-android/+bug/1045244 >>> >>> The weird thing is LAVA shows that it works well: >>> >>> >>> http://validation.linaro.org/lava-server/dashboard/image-reports/origen-jb-g... >>> >>> Is there anything I missed during SD card flashing? >>> >>> Thank you! >>> >>> >>> BR >>> Botao Sun >> >> >
-- Zach Pfeffer Android Platform Team Lead, Linaro Platform Teams Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#%21/linaroorg - http://www.linaro.org/linaro-blog
-- Zach Pfeffer Android Platform Team Lead, Linaro Platform Teams Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#%21/linaroorg - http://www.linaro.org/linaro-blog
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android
-- Zach Pfeffer Android Platform Team Lead, Linaro Platform Teams Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#%21/linaroorg - http://www.linaro.org/linaro-blog
linaro-android mailing list linaro-android@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android